Generated on June 26, 2024
CONNECTION DATA SHEET
PIPE BODY PROPERTIES
OD: 7.000 in. Grade: VM 25S 125
Nominal OD 7.000 in.
Weight: 29.00 lb/ft Drift: 6.059 in. (API)
Nominal ID 6.184 in.
Wall Th.: 0.408 in.
Nominal Wall Thickness 0.408 in.
Minimum Wall Thickness 90.0 %
®
VAM 21 Nominal Weight (API) 29.00 lb/ft
Plain End Weight 28.75 lb/ft
Drift 6.059 in.
Grade Type CRA
Minimum Yield Strength 125 ksi
Maximum Yield Strength 150 ksi
Minimum Ultimate Tensile Strength 130 ksi
Pipe Body Yield Strength 1,056 klb
Compression Yield Strength(1) 845 klb
Internal Yield Pressure 13,110 psi
Collapse Pressure 9,110 psi
(1) Derating to 80% x Min. YS because of anisotropic behavior of cold-worked or cold-hardened CRA material
(referenced as Type 2, 3 & 4 as per ISO 13680 / API 5CRA)
T&C
CONNECTION PROPERTIES
Connection Type Premium Threaded & Coupled
Nominal Connection OD 7.670 in.
Field Torque Values
Nominal Connection ID 6.324 in.
Make-up Loss 4.866 in.
Make-up Torque (ft-lb)
Coupling Length 11.693 in.
13,150 MIN
Tension Efficiency, with Sealability(2) 100 % Pipe Body
14,200 OPTI
Compression Efficiency, with Sealability(2) 100 % Pipe Body
15,250 MAX
Internal Pressure Efficiency 100 % Pipe Body
External Pressure Efficiency 100 % Pipe Body
Torque with Sealability (ft-lb)
(2) Sealability rating demonstrated as per API RP 5C5 / ISO 13679
16,550 MTS
JOINT PERFORMANCES
Shouldering Torque (ft-lb) Tension Strength, with Sealability(2) 1,056 klb
710 MIN Compression Strength, with Sealability(2) 845 klb
9,940 MAX Internal Pressure Resistance 13,110 psi
External Pressure Resistance 9,110 psi
Maximum Bending, Structural 74 °/100 ft
Delta Turn (Turns)
Maximum Bending, with Sealability(2) 42 °/100 ft
0.010 MIN
Maximum Load on Coupling Face 483 klb
0.130 MAX
(2) Sealability rating demonstrated as per API RP 5C5 / ISO 13679
(3) Delta Turn: number of turns from shouldering
torque to final torque.
(4) MTS: Maximum Torque with Sealability.
The information available on this Site (‘Information’) is offered for general information. It is supposed to be correct at the time of publishing on the Site but is not intended to constitute professional advice and is provided ‘as is’. Vallourec
does not guarantee the completeness and accuracy of this Information. Under no circumstances will Vallourec be liable for damage, liability of any kind, or any loss or injury that may result from the credibility given to this Information or
its use. The Information may be amended, corrected, at any time by Vallourec without warning. Vallourec’s products and services are subject to Vallourec’s The Information may be amended, corrected, and/or supplemented at any time
by Vallourec without warning. standard terms and conditions or otherwise to the terms resulting from the respective contracts of sale or services.
