Hoyer Smart Motor Sensors
Monitor the condition of your electric motor by combining sensing Detectable Motor Faults
technologies with data analysis. In cooperation with ADI OtoSense, Hoyer
Motors now offers a Hoyer Smart Motor Sensor.
Power System
With a smart motor sensor, you can monitor the motor health in real time. Asymmetry in motor currents
Stator winding
Stator resistance variation
Actionable diagnostics Rotor
Rotor resistance variation
Diagnose nine mechanical and electrical motor faults
• Includes fault severity and recommended actions to address specific faults Motor shaft
• Performance indicator identifies potential issues with the load or a change Gravity center displacement
in the process that might require additional action
Eccentricity
Stator/rotor concentricity
issue
Automated Alignment
Automatically generated diagnostics and alarms customised to your motor Motor/load misaligned
• No need to manually set alarms or thresholds
Cooling System
• No manual device training required Motor cooling system problem
• No expertise required for initial analysis
Soft/loose foot
Fixing system problem
Scalable
Bearing
Quick to set up, easy to use Failures/defects in bearing
• Works with all low voltage asynchronous motors
• No wires, no additional gateways required
• Easy to use interface reduces training and device maintenance
Optimise your resources Motor compatibility
• 3-phase squirrel cage induction motor
Hoyer Smart Motor Sensor is a full turnkey hardware • Standard low voltage IEC and NEMA motors
and software solution that helps avoid downtime and
optimise maintenance cost. • Frames up to 450 (IEC 60034) or 500 (NEMA
MG1) whose power range varies from 0.37
kW to 500 kW or from 0.5 hp to 700 hp
With Hoyer Smart Motor Sensor, you can
monitor/manage your critical assets from all locations • Motors driven by any type of device: directly
on line (DOL), by variable frequency drive
through a single organizationally shared dashboard. (VFD), soft starter and star delta
The device sends sensing data to a cloud where AI
provides diagnostics and delivers prescriptive
maintenance actions via a web platform and mobile Requirements
app.
Network
Network Dedicated 2.4 GHz
network (5GHz networks
not supported)
Security WEP, WPA, or WPA2
Signal strength Greater than -60dB
Ports Port 8883 and HTTPS port
(443) must be open
Environment
Operation -40 oC to +60 oC
Storage 50 oC to avoid energy
leakage from lithium batteries
App
iPhone iOS 13 or later
iPad iPadOS 13 or later
Android Android 6.0
(Marshmallow) or later
Specifications
Physical characteristics
Weight 0.5 kg
Size 70x146x42 mm
Case material ABS
Mounting Cooling fins
Battery type 4 x replaceable
AA lithium batteries
Vibration measurement
Amplitude range ±40 g
Frequency range 1 Hz to 3.1 kHz
Data format Waveform, FFT, rms
2-axis vibration Axial and radial
Wireless communication
Network standard Wi-Fi b/g/n
Radio standard IEEE 802.11 b/g/n
Frequency 2.4 GHz
Range (nominal) >50 m
Certifications and standards
IP55
For more information, contact Hoyer Motors at:
[email protected]
