P a g e | 132

Schedule of Quantities (Electrical Components)

Name of Work:- Construction of Administrative Block at BSF Campus Kalinagar
Under Ftr HQ BSF M&C, Cachar, Silchar, Assam.

Sl
Description of item Quantity Rate Unit Amount
No
SH:-I (Wiring In Steel conduit )
Wiring for light point/ fan point/ exhaust
fan point/ call bell point with 1.5 sq.mm
FRLS PVC insulated copper conductor
single core cable in surface/ recessed
1 steel conduit, with modular switch,
modular plate, suitable GI box and
earthing the point with 1.5 sq.mm. FRLS
PVC insulated copper conductor single
core cable etc as required.
Group "C" point
a) 883 1845.00 point 1629135.00
s
Wiring for Twin control light point with
1.5 sq.mm FRLS PVC insulated copper
conductor single core cable in
surface/recessed steel conduit,2 way point
2 28 1981.00 point 55468.00
modular switch, modular plate, suitable s
GI box and earthing the point with 1.5
sq.mm FRLS PVC insulated copper
conductor single core cable etc.as reqd.
Wiring for light/ power plug with 2X4 sq.
mm FRLS PVC insulated copper
conductor single core cable in surface/
3 recessed steel conduit along with 1 No 4 3500 mtrs 433.00 metre 1515500.00
sq. mm FRLS PVC insulated copper
conductor single core cable for loop
earthing as required.
Wiring for light/ power plug with 4X4 sq.
mm FRLS PVC insulated copper
conductor single core cable in surface/
4 recessed steel conduit along with 2 Nos 4 2000 mtrs 662.00 metre 1324000.00
sq. mm FR PVC insulated copper
conductor single core cable for loop
earthing as required.
Wiring for circuit/ submain wiring along
with earth wire with the following sizes
5 of FRLS PVC insulated copper
conductor, single core cable in surface/
recessed steel conduit as required.
a) 2X1.5 sq mm +1X1.5 sq. mm earth wire 650 mtrs 327.00 metre 212550.00
b) 4X1.5 sq mm +2X1.5 sq. mm earth wire 170 mtrs 399.00 metre 67830.00
c) 2X6 sq mm + 1X6 sq mm earth wire 400 mtrs 589.00 metre 235600.00
 P a g e | 133

d) 4X10 sq. mm + 2X6 sq. mm earth wire 180 mtrs 1166.00 metre 209880.00
Supplying and drawing following pair 0.5
mm dia FRLS PVC insulated annealed
6 copper conductor, unarmored telephone
cable in the existing surface/ recessed
steel/ PVC conduit as required.
a) 2 Pair 1700 mtrs 38.00 metre 64600.00
Supplying and drawing co-axial TV cable
RG-6 grade, 0.7 mm solid copper
conductor PE insulated, shielded with
7 fine tinned copper braid and protected 200 mtrs 47.00 metre 9400.00
with PVC sheath in the existing
surface/recessed steel/PVC conduit as
required
Supplying and drawing of UTP 4 pair
8 CAT 6 LAN Cable in the existing
surface/ recessed steel/ PVC conduit as
required.
a) 1 Run of Cable 900 mtrs 57.00 metre 51300.00
b) 2 Run of Cable 600 mtrs 96.00 metre 57600.00
c) 3 Run of Cable 300 mtrs 134.00 metre 40200.00
Supplying and fixing of following sizes
of steel conduit along with accessories in
surface/recess including painting in case
9
of surface conduit, or cutting the wall and
making good the same in case of recessed
conduit as required.
a) 20 mm dia 1450 mtrs 223.00 metre 323350.00
b) 25 mm dia 1350 mtrs 256.00 metre 345600.00
Supplying and fixing following modular
switch/ socket on the existing modular
10 plate & switch box including connections
but excluding modular plate etc. as
required.
a) Telephone socket outlet 82 nos 148.00 each 12136.00
b) TV antenna socket outlet 9 nos 148.00 each 1332.00
c) LAN socket outlet 101 nos 596.00 each 60196.00
Supplying and fixing following size/
modules, GI box alongwith modular base
11
& cover plate for modular switches in
recess etc. as required.
a) 1 or 2 Module (75mmX75mm) 192 nos 298.00 each 57216.00
 P a g e | 134

Supplying and fixing suitable size GI box

with modular plate and cover in front on
12 surface or in recess, including providing 250 nos 477.00 each 119250.00
and fixing 3 pin 5/6 amps modular socket
outlet and 5/6 amps modular switch,
connection etc. as required.
Supplying and fixing suitable size GI box
with modular plate and cover in front on
surface or in recess, including providing
13 and fixing 6 pin 5/6 & 15/16 amps 128 nos 586.00 each 75008.00
modular socket outlet and 15/16 amps
modular switch, connection etc. as
required.
Supplying and fixing 3 pin, 5 A ceiling
rose on the existing junction box/ wooden
14 127 nos 87.00 each 11049.00
block including connections etc. as
required.
Supplying and fixing call bell/ buzzer
15 suitable for single phase, 230 volts, 62 nos 99.00 each 6138.00
complete as required.
Supplying and fixing suitable size GI box
with modular plate and cover in front on
surface or in recess, including providng
and fixing 2 nos. 3 pin 5/6 amps modular
16 116 nos 676.00 each 78416.00
socket outlets and 2 nos 5/6 amps
modular switches, connection etc. as
required. (For light plugs to be used in
non residential buildings).
Supplying and fixing of following sizes
of G.I. Raceway / trunking cable
17 management system on surface / in recess
including cutting the wall / Floor and
making good the same in case of recess
as required.
a) 100 mm x 38 mm 10 mtrs 1693.00 mtr 16930.00
b) 75 mm x 38 mm 10 mtrs 1494.00 mtr 14940.00
Supplying and fixing of following sizes
18 of Access Outlet Box for above
G.I.Raceway etc as reqd.
a) 150 mm X 150 mm 4 nos 7401.00 each 29604.00
Supplying and fixing of following sizes
19 of Vertical Access Box for above
G.I.Raceway etc as reqd.
a) 250 mm X 200 mm X 45 mm 2 nos 3350.00 each 6700.00
SH :- II (Fittings and Fixtures)
 P a g e | 135

Supplying, Installation, testing and

commissioning of LED mirror light of
wattage not less than 5 watt, having
acrylic cover, lumen output not less than
100 lm/w, PF>=0.90, CRI>80 and
1 30 nos. 460.00 each 13800.00
suitable for operation on 240 V, 50 Hz,
single phase AC supply i/c connection
with 1.5 sq mm FRLS insulated copper
conductor single core cable and earthing
complete with all accessories etc as reqd.
Supplying, Installation, testing and
commissioning of energy efficient
surface mounted IP 65 LED Bulk head
fitting with opal diffuser and with in-built
2 surge protection along with supplying & 30 nos 1019.00 each 30570.00
fixing of 9-11 W LED bulb suitable for
operation on 240 V, 50 Hz, single phase
AC supply complete & all accessories i/c
connection etc as required
Supplying, Installation, testing and
commissioning of 34 to 36 watt surface/
recess mounted LED luminaire of size
600 mm x 600 mm having white powder
3 coated CRCA Housing and 66 nos 4602.00 each 303732.00
polycarbonate diffuser, lumen output not
less than 120 lumen/ watt, PF 0.95, THD
< 10% and CRI > 80 complete with all
accessories i/c connection etc as reqd.
Supplying, Installation, testing and
commissioning of 4 feet x 1 feet Surface/
recessed mounted luminarie with high
performance LEDs, full diffuser having
system lumen output not less than 120
4 142 nos 3398.00 each 482516.00
lumen/watt, system wattage 34- 36 watt
complete with all accessories i/c
connection with 1.5 sq mm FRLS
insulated copper conductor single core
cable and earthing complete etc as reqd.
Supplying, Installation, testing and
commissioning of following surface/
recess mounted square/ round type LED
down light luminimaire with aluminium
die cast housing complete with
5
polycarbonate diffuser, all accessories
directly on ceiling/wall i/c connection
with 1.5 sq mm FRLS insulated copper
conductor single core cable and earthing
etc as reqd.
a) 6 watt 45 nos 871.00 each 39195.00
c) 18 watt 17 nos 1846.00 each 31382.00
 P a g e | 136

Supplying, Installation, testing and

commissioning of linear suspended
luminarie with high performance LEDs
having length not less than 900 mm
having extruded aluminium housing,
system lumen output not less than 115
6 137 nos 4292.00 each 588004.00
lumen/watt, system wattage 15 watt, PF
0.95, THD < 10% and CRI >= 80
complete with all accessories i/c
connection with 1.5 sq mm FRLS
insulated copper conductor single core
cable and earthing complete etc as reqd
Supplying, Installation, testing and
commissioning of linear suspended
luminarie with high performance LEDs
having length not less than 1200 mm
having extruded aluminium housing,
system lumen output not less than 115
7 141 nos 4876.00 each 687516.00
lumen/watt, system wattage 30 watt, PF
0.95, THD < 10% and CRI >= 80
complete with all accessories i/c
connection with 1.5 sq mm FRLS
insulated copper conductor single core
cable and earthing complete etc as reqd
Supply, Installation, Testing and
Commissioning of 1200 mm sweep, BEE
5 star rated, ceiling fan with Brush Less
Direct Current (BLDC) Motor, class of
insulation: B, 3 nos. blades, 30 cm long
down rod, 2 nos. canopies, shackle kit,
safety rope, copper winding, Power
Factor not less than 0.9, Service Value
(CM/M/W) minimum 6.00, Air delivery
minimum 210 Cum/Min , 350 RPM
8 154 nos 2730.00 each 420420.00
(tolerance as per IS : 374-2019), THD
less than 10%, remote or electronic
regulator unit for speed control and all
remaining accessories including safety
pin, nut bolts, washers, temperature
rise=75 degree C (max.), insulation
resistance more than 2 mega ohm,
suitable for 230 V, 50 Hz, single phase
AC Supply, earthing etc. complete as
required.
Supplying, Installation, Testing,
commissioning of Fresh Air fan of 250
mm sweep in the existing opening
including making good the damage,
9 32 nos 2346.00 each 75072.00
connection with 1.5 sq. mm FRLS PVC
insulated, copper conductor, single core
cable , testing, commissioning etc. as
reqd.
 P a g e | 137

Supplying, Installation, testing,

commissioning of 300 mm sweep, 1400
RPM heavy duty exhaust fan with
metallic blade in the existing opening
10 8 nos 5607.00 each 44856.00
along with G.I. louvers & shutters,
including making good the damage,
connection, testing, commissioning etc.
as required.
Supplying, Installation, testing,
commissioning of 400 mm sweep
oscillating fan suitable for operation on
11 57 nos 3454.00 each 196878.00
single phase 230V, 50Hz AC supply
having air delivery of minimum 70 CMM
complete etc. as required.
SH :- III (MCCB, MCB & DB'S)
Providing and fixing following rating and
breaking capacity and pole MCCB with
1 thermomagnetic release and terminal
spreaders in existing cubical panel board
including drilling holes in cubical panel,
making connections, etc. as required.
a) 160 A, 25 kA,TP MCCB 1 nos 13172.00 each 13172.00
b) 200 A, 25 kA 4P MCCB 1 nos 19043.00 each 19043.00
Supplying and fixing of following ways
surface mounted Load Bank/SMDB of
sheet steel, dust protected, duly powder
painted, inclusive of 250 A tinned copper
2
bus bar, common neutral link, earth bar,
din bar for mounting MCCBs (but
without incoming and outgoing MCCBs)
as required.
a) 8 way 1 nos 46487.00 each 46487.00
Supplying and fixing following way,
single pole and neutral, sheet steel, MCB
distribution board, 240 V, on surface/
recess, complete with tinned copper bus
3
bar, neutral bus bar, earth bar, din bar,
interconnections, powder painted
including earthing etc. as required. (But
without MCB/RCCB/Isolator)
a) 12 way , Double door 17 nos 2315.00 each 39355.00
b) 16 way, Double door 17 nos 3141.00 each 53397.00
 P a g e | 138

Supplying and fixing following way,

horizontal type three pole and neutral,
sheet steel, MCB distribution board, 415
V, on surface/ recess, complete with
4 tinned copper bus bar, neutral bus bar,
earth bar, din bar, interconnections,
powder painted including earthing etc. as
required. (But without
MCB/RCCB/Isolator)
a) 4 way (4 + 12), Double door 5 nos 4091.00 each 20455.00
b) 6 way (4 + 18), Double door 11 nos 4974.00 each 54714.00
Supplying and fixing of following ways
surface/ recess mounting, vertical type, 415
V, TPN MCB distribution board of sheet
steel, dust protected, duly powder painted,
inclusive of 200 A tinned copper bus bar,
5
common neutral link, earth bar, din bar for
mounting MCBs (but without MCBs and
incomer ) as required . (Note : Vertical type
MCB TPDB is normally used where 3 phase
outlets are required.)
a) 4 way (4 + 12), Double door 5 nos 7512.00 each 37560.00
b) 8 way (4 + 24), Double door 1 nos 10165.00 each 10165.00
c) 12 way (4 + 36), Double door 1 nos 12833.00 each 12833.00

Supplying and fixing following rating single

pole, 240/415 V, 10 kA, "C" curve, miniature
6 circuit breaker suitable for inductive load of
following poles in the existing MCB DB
complete with connections, testing and
commissioning etc. as required.
a) 63 A 12 nos 566.00 each 6792.00
b) 40 A 60 nos 566.00 each 33960.00
c) 5 A to 32 A 606 nos 256.00 each 155136.00
Supplying and fixing following rating , 415
volts, "C" curve, triple pole miniature circuit
breaker suitable for inductive load in the
7
existing MCB DB complete with
connections, testing and commissioning etc.
as required.
a) 40 A 22 nos 1769.00 each 38918.00
b) 63 A 24 nos 1769.00 each 42456.00
Supplying and fixing following rating,
double pole, 240 V, isolator in the
8 existing MCB DB complete with
connections, testing and commissioning
etc. as required.
a) 40 A 34 nos 435.00 each 14790.00

9 Supplying and fixing following rating, four

pole, 415 V, isolator in the existing MCB DB
 P a g e | 139

complete with connections, testing and

commissioning etc. as required.
a) 63 A 16 nos 1034.00 each 16544.00
b) 100 A 5 nos 1227.00 each 6135.00
Supplying and fixing Cable End Box (Loose
Wire Box) suitable for following single pole
and neutral, sheet steel, MCB distribution
10 board, 240 Volts, on surface/ recess, complete
with testing and commissioning etc. as
required.
a) For 12 way, Double door SPN MCBDB 17 Nos 1049.00 each 17833.00
b) For 16 way, Double door SPN MCBDB 17 Nos 1372.00 each 23324.00
Supplying and fixing Cable End Box (Loose
Wire Box) suitable for following triple pole
and neutral, sheet steel, MCB distribution
11 board, 415 Volts, on surface/ recess, complete
with testing and commissioning etc.as
required.
a) For 4 way, Double door TPN MCBDB 5 nos 1080.00 each 5400.00
b) For 6 way, Double door TPN MCBDB 11 nos 1124.00 each 12364.00
Supplying and fixing Cable End Box (Loose
Wire Box) suitable for triple pole and neutral,
12 sheet steel, Vertical MCB distribution board, 7 nos 1170.00 each 8190.00
415 Volts, on surface/ recess, complete with
testing and commissioning etc. as required.
SH:-IV(Street Light)
Supplying, installation, testing and
commissioning of hot dip Galvanized
octogonal street light pole suitable for wind
velocity of relevent IS code of following
heights single section made of 3 mm thick
sheet steel plate having base dia of 130 mm
and top dia of 70 mm i/c built in control gear
box, with base plate of 200 mm X 200 mm X
12 mm complete with foundation and
grouting nut bolt etc. (as per manufacture
design). Pole should be finished with flush
door and connection with 3 x 1.5 Sq. mm.
1 PVC insulated FRLS copper conductor cable
from flush door to fitting including supplying
and installing of 6A C curve SP MCB , 4
pole heavy duty connector mounted on hylem
/ mica sheet of thckness not less then 6mm
connection etc. as required. Pole should be
erected on suitable size cement concrete
foundation with 1:3:6 (1 cement : 3 Corse
sand : 6 graded stone aggregate of 20 mm dia
nominal size) with steel reinforcement as per
manufacturer recommendation/ design and
complete with suitable size of foundation
bolts, suitable size of GI Cable entry & exit
Pipe & templets etc. complete as required.
 P a g e | 140

a) 3 meter height Octagonal Pole 15 Nos 14901.00 each 223515.00

Supplying, Installation, Testing and
Commissioning of 30 W LED UFO type
Solar Post top made out of solid
polycarbonate housing, built in panel and
battery, having minimum 4 lumen packs,
2 15 nos 21889.00 each 328335.00
2.8 Ghz motion sensor, selectable CCT,
microwave sensor, shock & vibrant
resistant, CE certified, IP 65 Protection
along with remote complete with all
accessories i/c connection etc as reqd.
Supplying, Installation, Testing and
Commissioning of 8-10 watt LED type
Bollard fitting with luminous efficacy 75
lumen/Watt, colour temperature 5700K,
having length 1000 mm, diameter 74 mm
and with fixing in the with the help of
3 suitable bolt & nut etc. as reqd and i/c 15 nos 6239.00 each 93585.00
providing & fixing suitable size . Fitting
should be erected on suitable size cement
concrete foundation having size not less
than (200mmX200mm depth 300 mm
with 1:1.5:3 (1Cement:1.5 Coarse
Sand:3 Graded Stone aggregate of 20 mm
dia nominal size) complete as required.
SH:-V (Earthing)
Earthing with G.I. earth pipe 4.5 metre
long, 40 mm dia including accessories,
and providing masonry enclosure with
1 10 nos 6855.00 each 68550.00
cover plate having locking arrangement
and watering pipe etc. with charcoal/
coke and salt as required.
Earthing with G.I. earth plate 600 mm X
600 mm X 6 mm thick including
accessories, and providing masonry
2 enclosure with cover plate having locking 8 nos 7472.00 each 59776.00
arrangement and watering pipe of 2.7
metre long etc. with charcoal/ coke and
salt as required.
Providing and fixing 25 mm X 5 mm G.I.
strip in 40 mm dia G.I. pipe from earth
3 electrode including connection with G.I. 180 mtrs 706.00 metre 127080.00
nut, bolt, spring, washer excavation and
re-filling etc. as required.
Providing and fixing 6 SWG dia G.I.
4 wire on surface or in recess for loop 15 mtrs 70.00 metre 1050.00
earthing as required.
 P a g e | 141

Providing and fixing 6 SWG dia G.I.

wire on surface or in recess for loop
5 earthing along with existing surface/ 510 mtrs 42.00 metre 21420.00
recessed conduit/submain wiring/ cable
as required.
Providing and fixing 25 mm X 5 mm G.I
6 strip on surface or in recess for 70 mtrs 244.00 metre 17080.00
connections etc. as required.
SH:- VI (Lightning Conductor)
Providing and fixing of lightning
conductor finial, made of 25 mm dia 300
mm long, G.I. tube, having single prong
1 15 nos 518.00 each 7770.00
at top, with 85 mm dia 6 mm thick G.I.
base plate including holes etc. complete
as required.
Jointing copper / G.I. tape (with another
copper/ G I tape, base of the finial or any
2 other metallic object) by riveting / nut 80 nos 113.00 each 9040.00
bolting/ sweating and soldering etc as
required.
Providing and fixing G.I. tape 20 mm X 3
mm thick on parapet or surface of wall for
3 300 mtrs 126.00 metre 37800.00
lightning conductor complete as required.
(For horizontal run)
Providing and fixing G.I. tape 20 mm X 3
mm thick on parapet or surface of wall
4 80 mtrs 197.00 metre 15760.00
for lightning conductor complete as
required. (For vertical run)
Providing and fixing testing joint, made
of 20 mm X 3 mm thick G.I. strip, 125
5 mm long, with 4 nos. of G.I. bolts, nuts, 6 nos 121.00 each 726.00
chuck nuts and spring washers etc.
complete as required.
Providing and laying G.I. tape 32 mm X
6 6 mm from earth electrode directly in 40 mtrs 195.00 metre 7800.00
ground as required.
SH- VII (Panels)
Fabrication, supplying, installation, testing
and commissioning of suitable size indoor
cubical type LT panel for 415 V, 3 phase, 4
wire, 50Hz, AC supply system, made up of 2
mm thick CRCA sheet steel, dust & vermin
proof, having compartmentalized &
seggregated for each circuit, having , locking
arrangement, openable hinged type door
1 (double leaf ) in the front & rear side
1 job 235049.00 job 235049.00
openable having busbar chamber with 4 strip
aluminium busbar of capacity 200 amps
rating, GI earth bar of suitable size at the rear,
earth stud, cable entry through gland plate of
3 mm thick, cable alleys,complete with 7 tank
process for powder coating in approved
shade, bottom base channel of MS section not
 P a g e | 142

less than 100 mm x 50 mm x 3 mm thick

including providing and accomodating the
following swichgears and accessories etc.
complete as required.(General arrangement
and schematic diagram to be approved by the
department before start of fabrication.)
INCOMER: .
125 Amp, 415 Volt, 25 KA, Ics=100%
Icu, 4 Pole, MCCB with thermal
magnetic release range 80-100 A with
suitable rotary handle and spreader
terminals-1 No.
OUTGOING:-
100 Amp , 415 Volt, 25 KA, Ics=100%
Icu, 4 Pole, MCCB with thermal
magnetic release range 80-100 A with
suitable rotary handle and spreader
terminals.-1 No
63 Amp, 415 Volt, 18 KA, Ics=100%
Icu, 4 Pole, MCCB with thermal
magnetic release range 50-63A with
suitable rotary handle and spreader
terminals. -06 nos
LED Indicating lamps (R,Y,B) with 3
Nos 6 amps SP MCB etc
LED Multifunction meter (V, A, F, PF,
kW, kVA, Old energy, Load hours, site
selectable kWh/ kVAh) with accuracy
class 1, voltage range 50-520 Vac and
Suitable Rating of CT etc. as required.
Fabrication, supplying, installation,
testing and commissioning of suitable
size indoor cubical type LT panel for 415
V, 3 phase, 4 wire, 50Hz, AC supply
system of suitable size, made up of 2 mm
thick CRCA sheet steel, dust & vermin
proof, having, compartmentalised &
seggregated for each circuit, having
locking arrangement, openable hinged
type door (double leaf ) in the front &
rear side openable having busbar
2 1 job 256447.00 job 256447.00
chamber with 4 strip aluminium busbar
of capacity 400 amps rating, GI earth bar
of suitable size at the rear, earth stud,
cable entry through gland plate of 3 mm
thick, cable alleys,complete with 7 tank
process for powder coating in approved
shade, 50, bottom base channel of MS
section not less than 100 mm x 50 mm x
3 mm thick including providing and
accomodating the following swichgears
and accessories etc. complete as required.
 P a g e | 143

INCOMER:
250 Amp, 415 Volt, 36 KA, Ics=100%
Icu, 4 Pole, MCCB with thermal
magnetic release range 200-250 A with
suitable rotary handle and spreader
terminals-1 No.
Outgoing:-
100 Amp, 415 Volt, 25 KA, Ics=100%
Icu, 4 Pole, MCCB with thermal
magnetic release range 80-100 A with
suitable rotary handle and spreader
terminals.-4 nos
160 Amp, 415 Volt, 25 KA, Ics=100%
Icu, 4 Pole, MCCB with thermal
magnetic release range 125-160 A with
suitable rotary handle and spreader
terminals.-1 no
LED Indicating lamps (R,Y,B) with 3
Nos 6 amps SP MCB etc
LED Multifunction meter (V, A, F, PF,
kW, kVA, Old energy, On and Run
hours, site selectable kWh/ kVAh) with
accuracy class 1, voltage range 50-520
VAC and suitable rating of CT etc. as
required.
SH:-VIII ( Fire Fighting & Fire
Extinguisher)
(A) Supplying, installation, testing and
commissioning of electric driven terrace
pump suitable for automatic operation
and consisting of following, complete in
all respects, as required: (Terrace Pump)
(B) Horizontal type, multistage,
centrifugal, split casing pump of cast iron
body & bronze impeller with stainless
steel shaft, mechanical confirming to IS:
1520
(C) Suitable HP squirell cage induction
1 motor TEFC type suitable for operation
on 415 volts, 3 phase, 50 Hz, AC supply
with IP55 class of protection for
enclosure, horiziontal foot mounted type
with Class-'F' insulation, conforming to
IS-325.
(D) M.S. fabricated common base plate,
coupling, coupling guard, foundation
bolts etc. as required.
(E) Suitable cement concrete foundation
duly plastered and with anti vibration
pads.
a) 450 lpm at 35 m Head 2 nos 86203.00 set 172406.00
 P a g e | 144

Providing, installation, testing and

commissioning of stainless steel Y-
2 Strainer fabricated out of 1.6 mm thick
stainless steel, Grade 304, sheet with 3
mm dia holes with stainless steel flange.
a) 100mm dia 1 nos 6664.00 each 6664.00
Supplying, fixing, testing and
commissioning of butterfly valve of PN
1.6 rating with bronze/gun metal seat
3
duly ISI marked complete with nuts,
bolts, washers, gaskets conforming to IS
13095 of following sizes as required.
a) 100 mm dia 9 Nos 6667.00 each 60003.00
Providing, installation, testing and
commissioning of non return valve of
4 folowing sizes conforming to IS:5312
complete with rubber gasket, GI bolts,
nuts, washers etc. as required.
a) 100mm dia 6 nos 11050.00 set 66300.00
Supplying and fixing air vessel made of
250 mm dia, 8 mm thick MS sheet, 1200
mm in height with air release valve on
top and flanged connection to riser, drain
5 arrangement with 25 mm dia gun metal 2 nos 18244.00 set 36488.00
wheel valve with required accessories,
pressure gauge and painting with
synthetic enamel paint of approved shade
as required.
Providing laying, testing &
commissioning of 'C' class heavy duty
MS Pipe conforming to IS 1239/3589 i/c
fittings like elbows, tees, flanges, tapers,
nuts bolts, gaskets etc. in ground
6 including welding, excavation &
providing cement concrete blocks as
supports, anticorrosive treatment with
coaltar/asphalt tape as per IS 10221,
refilling the trench etc. of following sizes
complete as required.
a) 150 mm. Dia 64 mtrs 3804.00 metre 243456.00
Providing, laying, testing &
commissioning of 'C' class heavy duty
MS pipe conforming to IS 3589/IS 1239
including Welding, fittings like elbows,
tes, flanges, tapers, nuts, bolts, gasket etc.
7
and fixing the pipe on the wall/ceiling
with suitable clamp/support frame and
painting with two or more coats of
synthetic enamel paint of required shade
complete as required:
 P a g e | 145

a) 100mm dia 62 mtrs 2555.00 metre 158410.00

Supplying and fixing single headed
internal hydrant valve with instantaneous
Gunmetal/Stainless Steel coupling of 63
8 mm dia with cast iron wheel ISI marked
conforming to IS 5290 (Type -A) with
blank Gunmetal/Stainless Steel cap and
chain as required
a) Single headed Stainless steel 6 nos 6139.00 set 36834.00
Supplying and fixing of fire brigade
connection of cast iron body with gun
9 metal male instantaneous inlet couplins
complete with cap and chain as reqd. for
suitable dia MS pipe connection
conforming to IS 904 as requird.
a) 2 way-100 mm dia M.S Pipe 2 nos 6742.00 set 13484.00
Supplying and fixing orifice plate made
out of 6 mm thick stainless steel (Grade
304) with orifice of required size to be
10 fitted between flange & landing valve of 6 nos 1321.00 each 7926.00
external and internal hydrants to reduce
pressure at the outlet to the level of 3.5
kg/cm2 complete as required.
Supplying and fixing 63 mm dia, 15 m
long RRL hose pipe with 63 mm dia male
11 and female couplings duly bound with Gl
wire, rivets etc. conforming to IS 636
(type-A) as required:
a) Stainless Steel (Grade 304) 6 nos 4448.00 set 26688.00
Supplying and fixing first-aid Hose Reel
with MS construction spray painted in
post office red, conforming to IS 884
complete with the following as required.
20 mm nominal internal dia water hose
thermoplastic (Textile reinforced) type -2
12
as per IS: 1258520 mm nominal internal
dia gun metal globe valve &
nozzle.Drum and brackets for fixing the
equipments on wall.Connections from
riser with 25 mm dia stop gun metal
valve &M.S. Pipe and socket.
a) 30 m 6 nos 8675.00 set 52050.00
Supplying & fixing 63 mm dia gun metal
short branch pipe with 20 mm nominal
13 internal diameter size nozzle conforming
to IS 903 suitable for instantaneous
connection to interconnect hose pipe
coupling as required:
a) Stainless Steel (Grade 304) 6 nos 1662.00 each 9972.00
 P a g e | 146

Providing and fixing Powder Fire

extinguiser (Stored Pressure type) (4kg
capacity) duly ISI marked conforming to
14 IS:15683:2006, with IS 14609 ABC 24 nos 2601.00 each 62424.00
Powder complete with squeez grip
release valve, discharge pipe, locking
arrangement, pressure gauge etc.
complete as read.
Providing & Fixing of duly ISI marked
conforming to IS:15683:2006 Portable
fire Extinguisher, Carbandioxide type
capacity 4.5 kg flat base including valve,
discharge horn of not less than 10mm dia.
15 24 nos 8759.00 each 210216.00
1m long & complete in all respects
including initial filling with CO2 gas
filled to a filling ratio of not more than
0.667 and wall suspension bracket etc. as
required.
SH:-IX ( Fire Detection and Fire
Alarm System )
Supplying, installation, testing and
commissioning of micro processor based
intelligent addressable main fire alarm
panel, central processing unit with the
following loop modules and capable of
supporting not less than 240 devices
(including detectors) and minimum 120
detectors per loop and loop length up to 2
km, network communication card,
minimum 320 character graphics/ LCD
display with touch screen or other keypad
and minimum 4000 events history log in
the non volatile memory (EPROM),
1
power supply unit (230 ± 5% V, 50 hz),
48 hrs back-up with 24 volt sealed
maintenance free batteries with automatic
charger. The panel shall have facility to
connect printer to printout log and facility
to have seamless integration with
analog/digital voice evacuation system
(which is part of the schedule of work
under SH: PA System) and shall be
complete with all accessories . The panel
shall be compatible for IBMS system
with open protocol BACnet/ Modbus
over IP complete as per specifications.
a) Two Loop Panel. 1 nos 239225.00 each 239225.00
 P a g e | 147

Supplying, installation, testing &

commissioning of intelligent analog
2 addressable photothermal detector 129 nos 2858.00 each 368682.00
complete with mounting base complete
as required.
Supplying, installation, testing &
3 commissioning of addressable manual 29 nos 3871.00 each 112259.00
call point complete as required.
Supplying, installation, testing &
commissioning of response indicator on
4 surface/recessed MS Box having two 10 nos 276.00 each 2760.00
LED, metallic cover complete with all
connections etc as required.
Supplying, installation, testing &
5 commissioning of fault isolator complete 9 nos 3270.00 each 29430.00
with base as required.
Supplying, installation, testing &
6 commissioning of addressable horn cum 8 nos 3506.00 each 28048.00
strobe complete as required.
Supplying and drawing following sizes of
FRLS PVC insulated copper conductor,
7 single core cable in the existing surface/
recessed steel/ PVC conduit as required.
a) 2X1.5 sq mm 500 mtrs 70.00 metre 35000.00
b) 4X1.5 sq mm 200 mtrs 120.00 metre 24000.00
Supplying and fixing of following sizes of
steel conduit along with accessories in
surface/recess including painting in case of
8 surface conduit, or cutting the wall and
making good the same in case of recessed
conduit as required.
a) 20 mm dia 450 mtrs 223.00 metre 100350.00
b) 25 mm dia 150 mtrs 256.00 metre 38400.00
SH:-X (Fire Pump Panel)
Fabrication, supplying, installation, testing
and commissioning of suitable size indoor,
wall mounted , DOL starter panel for 02 no's
7.5 HP pump, made of 2 mm thick CRCA
sheet steel , dust & vermin proof, having
compartmentalised & seggregated for each
circuit, locking arrangement, openable hinged
type door in the front , suitable for 415V, 3
pahse, 50 Hz AC supply system , having GI
1 earth bar at the full width of rear, earth stud,
1 job 96294.00 job 96294.00
cable entry through gland plate of 3 mm
thick, i/c cleaning & finishing complete with
7 tank process for powder coating in
approved shade, etc. complete as required
including providing and accomodated the
following swich gears and accessories etc.as
required. (Panel board to be fabricated from
CPRI approved fabricator).
 P a g e | 148

100A, 4P, 18kA, MCCB with TM Release,

a) DU100D-1 no

b) DU/DN0 -100 Spreader Terminals - 4

Pole, for DN dsine MCCB-External-1 no

c) DU/DN0 Extended Rotary Handle, for

DN dsine MCCB-External--1 no
100/5A, 5VA, CL-1.0, ID-30, OD-80,
d) HT-50, Metering, Tape wound, current
transformer.-3 no

e) 3Ph, AC-1, 80-300V AC, Size- 96x96

LED Voltmeter-1 no

f) 3Ph, AC-1, 80-300V AC, Size- 96x96

LED Ammeter-1 no

g) Phase Indication Lamp Set of 3 Lamps

(R/Y/B)-1 no
h) 6A, 1P, 10kA, C-Curve MCB-3 no
i) 32A Neutral Link-1 no

j) 32A, 3P, 50kA, MCCB with Short circuit

protection, DN0-100M-2 no's

k) 50A, 3P, 240V AC, Power Contactor

with AC Coil, Type-MO-2 no's
Add on Aux. Contact Block (2NO+2NC
l) ), Top Mounting For MO 9-110/MO0-2
no's

8.5-12.5A, Bimetal Overload Relay,

m)
Directly Operated, Direct Mounting on
MO 9-45, Type: RTO-1-2 no's
SPP Fixed ON Delay 2sec and OFF
n) Dealy 7sec 415V AC, 1C/O SM301 (3Ph,
3W)-2 no's

o) 6A, 2P, 2 WAY Selector Switch, with

center off 90 degree-2 no's
Normal Type 22.5mm On/Off
p) Pushbutton with Required Contact
Element-2 no's
On/Off/Trip Indication Lamp 240VAC-2
q)
no's
r) 6A, 1P, 10kA, C-Curve MCB-2 no's
s) 32A Neutral Link-2 no's
SH XI : Lift
 P a g e | 149

Supplying, installation, testing &

commissioning of 13 passenger (884 kg)
lifts without machine room having
contract speed of 1 MPS serving
different floors in the lift shaft as per
1
detailed CPWD specifications for
electrical work (Lift) Part-III 2003 etc.
ammended upto date as required with
comprehensive maintenance for first year
:-
(i) Speed: 1 MPS
(ii) Floors: G+2 About 10.5 mtrs
(approx)
(iii) Travel : About 10.5 mtrs. (approx.)
(iv) Stops/opening:3 stops,3 openings,
opening on Same Side
(v) Controller: Microprocessor Based
variable voltage & variable frequency
(vi) Automatic rescue device complete
with dry main-tenance free batteries as
required.
(vii) Operation : Microprocessor based
simplex selective collective Control with
/ without attendant 1 job 2237049.00 job 2237049.00
(viii) Power — 415 V,+/- 10% 3 phase,
50 Hz, 4 wires system
(ix) Type of doors
(a) Car : Automatic Power operated,
centre opening horizontal sliding
stainless steel scratch proof surface
(Moon rock/ Honey Comb Finish).
i) Car Entrance:- As per CPWD
specification (Part III LIFTS)
ii) Car Inside Size:- As per
manufacturer's design and as per CPWD
specification (Part III LIFTS) with
minimum net inside car area as per
IS:14665 (Part-3/Secton-1) 2000 as
amended up to date.
(b) Landing doors : Automatic Power
Operated, Center Opening horizontal
sliding stainless steel scratch proof
surface (Moon rock/ Honey Comb
Finish) with door opening of not less than
900 mm.
i) Landing door size:- 900 mm (W) x
2000 mm (H)
 P a g e | 150

(x) Voice announcement system in the

car to announce the position of the
elevator in the hoistway as the car passes
or stops at a floor served by the elevator.

Note: Voice announcement system shall

be operated during operation of ARD
also.
xi) Three way Intercom ( in car, machine
room and upto fire control
room/reception not exceeding 200 mtrs.)

xii) Digital position indicators ( in car

and at all landings)
xiii) Battery operated emergency light
and alarm bell complete with invertor.
xiv) Infra red door curtain full height.
xv) Car operating panel shall be provided
on the both sides of the car door inside
the lift bottom of the at a height not more
800mm from floor level with stainless
steel buttons with braille signages of
inside the car and stainless steel
registration buttons with braille signages
at all landings of minimum dimension of
20mm with height of letter size 15 mm
including all facilities for disabled
persons.
xvi) Fireman's Switch at ground floor.
xvii) Overload warning indicator.
xviii) Car lighting with LED down lighter
with illumination of 200 lux and with
atleast 2 Nos. Cross flow blower fan with
louvers.(LED) and cabin fan
xix) SS hand rail not less than 600 mm
long at 900 mm above floor level on
three sides to be fixed in the lift car.
SH:-XII (MV Cable Laying/DWC Pipe
laying/End termination)
Supplying of following size ISI marked
XLPE insulated and PVC sheathed
1 aluminium conductor armoured U.G.
cable of 1.1 KV grade as required.
a) 3.5 x 120 sq mm 70 mtrs 1270.00 metre 88900.00
b) 3.5 x 70 sq mm 100 mtrs 813.00 metre 81300.00
c) 3.5 x 50 sq mm 120 mtrs 603.00 metre 72360.00
d) 3.5 x 35 sq mm 70 mtrs 445.00 metre 31150.00
 P a g e | 151

e) 4 x 25 sq mm 90 mtrs 377.00 metre 33930.00

f) 2 x 10 sq mm 350 mtrs 198.00 metre 69300.00
Laying of one number PVC insulated and
PVC sheathed / XLPE power cable of 1.1KV
grade of following size direct in ground
2
including excavation, sand cushioning,
protective covering and refilling the trench
etc as required.
a) Above 35 Sqmm and Upto 95 Sqmm. 95 mtrs 405.00 metre 38475.00
b) Above 95 sq. mm and upto 185 sq. mm 34 mtrs 422.00 metre 14348.00
Laying of one number PVC insulated and
PVC sheathed/ XLPE power cable1.1 KV
3 grade of following Size in the existing
RCC/HUME PIPE/METAL pipe as
required.
a) Upto 35 sq. mm 330 mtrs 37.00 metre 12210.00
b) Above 35 Sqmm and Upto 95 Sqmm. 28 mtrs 57.00 metre 1596.00
c) Above 95 sq. mm and upto 185 sq. mm 7 mtrs 77.00 metre 539.00
Laying of one number PVC insulated and
PVC sheathed/ XLPE power cable1.1 KV
4
grade of following Size in the existing
open duct as required.
a) Upto 35 sq. mm 16 mtrs 28.00 metre 448.00
b) Above 35 Sqmm and Upto 95 Sqmm. 16 mtrs 45.00 metre 720.00
c) Above 95 sq. mm and upto 185 sq. mm 9 mtrs 63.00 metre 567.00
Laying of one number PVC insulated and
PVC sheathed/ XLPE power cable1.1 KV
5
grade of following Size on wall surface
as required.
Upto 35 sq. mm (clamped with 1mm
a) 150 mtrs 55.00 metre 8250.00
thick saddle)
Above 35 Sqmm and Upto 95
b) Sqmm.((clamped with 25x3mm MS flat 51 mtrs 130.00 metre 6630.00
clamp)
Above 95 Sqmm and Upto 185
c) Sqmm.((clamped with 25/40x3mm MS 10 mtrs 153.00 metre 1530.00
flat clamp)
Supplying and making end termination with
brass compression gland and aluminium lugs
6 for following size of PVC insulated and PVC
sheathed / XLPE aluminium conductor cable
of 1.1 KV grade as required.
a) 3.5 x 120 sq mm (45 mm) 4 nos 613.00 each 2452.00
b) 3.5 x 70 sq mm (38 mm) 4 nos 468.00 each 1872.00
c) 3.5 x 50 sq mm (35 mm) 12 nos 413.00 each 4956.00
d) 3.5 x 35 sq mm (32 mm) 10 nos 369.00 each 3690.00
e) 4 x 25 sq mm (28 mm) 22 nos 315.00 each 6930.00
 P a g e | 152

f) 2 x 10 sq mm ( 19 mm) 30 nos 241.00 each 7230.00

Supplying and laying of following size DWC
HDPE pipe ISI marked along with all
accessories like socket, bend, couplers etc.
conforming to IS 14930, Part II complete
7 with fitting and cutting, jointing etc. direct in
ground (75 cm below ground level) including
excavation and refilling the trench but
excluding sand cushioning and protective
covering etc., complete as required.
63 mm dia (OD-63 mm & ID-51 mm
a) 330 mtrs 247.00 metre 81510.00
nominal)
SH:-XIII (VRF/VRVAir-Conditioning
System)
Outdoor Unit
Supply Installation, Testing &
Commissioning of modular type Variable
Refrigerant Flow/Variable Refrigerant
Volume air cooled Outdoor units suitable for
cooling and heating, having all hermetically
sealed inverter type Scroll Compressor(s),
minimum two compressors for above 14 HP
modules, microprocessor based Controller,
top discharge type condensing unit(s), with R
410 A Refrigerant, vibration isolators, with per
1 suitable foundation etc. complete as required.
200 HP 16415.00 3283000.00
HP
The unit shall deliver the rated capacity at
AHRI Conditions and work even at 50°C
ambient temperature without tripping. The
unit shall be suitable to work on 400V +/-
10%, 3 Phase, 50Hz AC power supply. The
unit shall be filled with first charge of the
refrigerant and ready for use as required. The
COP at AHRI conditions shall not be less
than 3.1 and IEER not less than 6.5 .
Inddor Unit-Cassette Type
Supply, installation, testing and
commissioning of following minimum
capacity 4-way flow VRV/VRF Cassette
Type Indoor ceiling mounted unit equipped
with synthetic washable media pre-filter, fan
section with low noise fan/dynamically
balanced blower, multispeed motor, coil
section with DX Copper coil, electronic
expansion valve, outer cabinet, drain pump,
2 grill, necessary supports, vibration isolation,
cord less remote control etc., suitable for
operation on single phase 230 V ± 10%, 50Hz
AC supply, complete, as required. The unit
shall have automatic force shut down
provision in case of fire on receiving signal
from BMS System. The cooling capacity of
indoor unit will be at air inlet conditions of 27
Degree C DB and 19 Degree C WB
temperature.
 P a g e | 153

a) 1.6 TR 8 nos 30204.00 each 241632.00

b) 2.4 TR 24 nos 31453.00 each 754872.00
Indoor Unit-High Wall Type
Supply, installation, testing and
commissioning of following minimum
capacity VRV/VRF High wall type
Indoor unit equipped with washable
synthetic media pre-filter, fan section
with low noise fan/dynamically balanced
blower, multispeed motor, coil section
with DX copper coil, electronic
expansion valve, outer cabinet, cord less
3 remote control, drain pan, necessary
accessories etc., suitable for operation on
230 V ± 10%, 50 Hz, single phase AC
supply, complete as required. The unit
shall have automatic force shut down
provision in case of fire on receiving
signal from BMS System. The cooling
capacity of indoor unit will be at air inlet
conditions of 27 Degree C DB and 19
Degree C WB temperature.
a) 1 TR 18 nos 19700 each 354600.00
b) 1.3 TR 21 nos 21176 each 444696.00
c) 1.65 TR 3 nos 21746 each 65238.00
d) 2 TR 21 nos 22100 each 464100.00
Copper Refrigerant Piping
Supply, Installation, testing and
commissioning including vaccumiazation
and Nitrogen testing of following
nominal sizes of soft/hard drawn copper
refrigerant piping for VRV/VRF system,
complete with fittings, with suitable
adjustable ring type hanger supports,
4 jointing/brazing including accessories,
insulated with XPLE Class-O tubular
insulation/with Class-O closed cell
elastometric nitrile rubber tubular sleeves
sections of specified thickness as given
below for Suction and Liquid lines, all
accessories as per specifications etc. as
required :
6.4 mm dia (OD) (Soft drawn) with tube
thickness 1.2 mm with 19 mm
a) 300 mtrs 343.00 metre 102900.00
thick insulation
 P a g e | 154

9.5 mm dia (OD) (Soft drawn) with tube

thickness 1.2 mm with 19 mm
b) 435 mtrs 517.00 metre 224895.00
thick insulation

12.7 mm dia (OD) (Soft drawn) with tube

thickness 1.2 mm with 19
c) 350 mtrs 697.00 metre 243950.00
mm thick insulation

15.86 mm dia (OD) (Soft drawn) with

tube thickness 1.2 mm with 19
d) 385 mtrs 883.00 metre 339955.00
mm thick insulation

19 mm dia (OD) (Hard drawn) with tube

thickness 1.2 mm with 19 mm
e) 160 mtrs 1062.00 metre 169920.00
thick insulation

22.2 mm dia (OD) (Hard drawn) with

tube thickness 1.2 mm with 19
f) 50 mtrs 1236.00 metre 61800.00
mm thick insulation

28.58 mm dia (OD) (Hard drawn) with

tube thickness 1.2 mm with 19
g) 110 mtrs 1612.00 metre 177320.00
mm thick insulation

34.9 mm dia (OD) (Hard drawn) with

h) tube thickness 1.62 mm with 19 30 mtrs 2584.00 metre 77520.00
mm thick insulation
38.1 mm dia (OD) (Hard drawn) with
i) tube thickness 1.62 mm with 19 50 mtrs 2819.00 metre 140950.00
mm thick insulation
41.27 mm dia (OD) (Hard drawn) with
j) tube thickness 1.62 mm with 19 100 mtrs 3067.00 metre 306700.00
mm thick insulation
Supplying and fixing of Cable Loop Box
outdoor type with IP66 protection
5 suitable for fixing of TP MCB, DIN Rail, 10 nos 3805.00 each 38050.00
2 no's brass compression gland for Loop
and supply cable, etc. as required.
Supplying and installing following size
of perforated painted with powder
coating M.S. cable trays with perforation
not more than 17.5%, in convenient
6 sections, joined with connectors,
suspended from the ceiling with M.S.
suspenders including bolts
& nuts, painting suspenders etc as
required.
100 mm width X 50 mm depth X 1.6 mm
a) 200 mtrs 543.00 metre 108600.00
thickness
 P a g e | 155

Supplying and installing following size

of perforated painted with powder
coating M.S. cable trays bends with
perforation not more than 17.5%,, joined
7
with connectors, suspended from the
ceiling with M.S. suspenders including
bolts & nuts, painting suspenders etc as
required.
100 mm width X 50 mm depth X 1.6 mm
a) 30 nos 868.00 metre 26040.00
thickness
Supplying and installing following size
of perforated painted with powder
coating M.S. cable trays Tee with
perforation not more than 17.5%, joined
8
with connectors, suspended from the
ceiling with M.S. suspenders including
bolts & nuts, painting suspenders etc as
required.
100 mm width X 50 mm depth X 1.6 mm
a) 15 nos 1003.00 metre 15045.00
thickness
Supplying and installing following size
of perforated painted with powder
coating M.S. cable trays Cross Member
with perforation not more than 17.5%,
9
joined with connectors, suspended from
the ceiling with M.S. suspenders
including bolts & nuts, painting
suspenders etc as required.
100 mm width X 50 mm depth X 1.6 mm
a) 15 nos 1139.00 metre 17085.00
thickness
SH:-XIV (Water Cooler)
SITC of self contained, energy
efficient,Stainless Steel body, Food
Grade SS-304 inner tank storage water
cooler with in-built RO(porosity of
0.0001 micron)+UV,7 stage
1 Purification,non CFC refrigerant having a 5 nos 83906.00 each 419530.00
cooling capacity of minimum 60 ltr/hr
and storage capacity of 80 litre with 2
faucet one is normal and other is for
cooled water etc. complete as required.
SH:-XV (ACP Signage)
 P a g e | 156

Providing and fixing emergency glow in

dark "Cautionary/Informatory Signage"
for directional usage made of photo
luminescent materilal having charactristic
of non-toxicity, eco-friendly, water proof,
fire proof, corrosion proof, explosion
proof and vapour-proof of standard
/required size fixed on aluminium sq.
1 30000 5.00 sq. cm 150000.00
composite panel (ACP) sheet of thickness cm
3 mm or more to help evacutating
procedure during power off/emerygency,
which is to be fixed in different
places/floors/areas inside the building
complex as per direction of Engineer-in-
charge.

Total 25018784.00
Total (only DSR items) 15513734.00
Total (only MR items) 9505050.00
Add Difference of applicable GST 18 % in the palce of 12% (Multiplying Factor
= 0.0633) on DSR amounting to Rs.16669323.00 982019.36

Add Multiplying Factor=0.973 on DSR item 16050368.02

Add Approved Cost Index of Cachar on DSR items @ 144 23112529.95
Total(DSR+MR) 32617579.95
Say 32617580.00