SUMMATIVE TEST
Basic Electronics-10
SY- 2020/2021
Name:_________________________Section:___________Date:________Score:________
I-MULTIPLE CHOICE
Directions: Read each statement carefully and write the letter and word/s of your
answer on a separate sheet.
1. It refers to a domestic appliance that washes clothes and linens.
A.Blender B.Microwave Oven C. Vacuum Cleaner D. Washing Machine
2. It is a device that is responsible in the conversion of electrical energy into mechanical
energy to facilitate an act of washing.
A. AC cord B. AC motor C. Spin timer D. Wash timer
3. In a washing machine, it serves as a washing tub.
A. Drain Hose B. Drum C. Pulsator D. Top Cover
4.In a washing machine, it serves as a passage way out of water.
A. Drain Hose B.Drum C. Pulsator D. Top Cover
5.It is a rotating part inside the tub of a washing machine and responsible in
making the water to spin.
A. Drain Hose B. Drum C. Pulsator D. Top Cover
6.It is a processing circuit that accepts the input signal coming from sensor, program
selection control and it provides the triggering voltage to the power controller.
A.Comparator B. Drain Hose C.Input command D. Pulsator
7.It is used to cover the tub.
A.Drain Hose B. Drum C. Pulsator D. Top Cover
8. It is responsible in transmitting mechanical energy from the AC motor to the pulley
of gear assembly.
A. AC motor B. Drive belt C. Drive control D. Pulley
9. It is a handtool used in holding, gripping and cutting of wires.
A. Blade cutter B.Pliers C. Screwdriver D. Soldering iron
10.It is a measuring instrument used to check continuity and resistance of a circuit.
A. Ammeter B. Ohmmeter C. Voltmeter D. Wattmeter
11. What is PPE?
A.Personal Promotion for Employment C. Personal Protective Equipment
B.Promotion Product for Empowerment D. Personal Product Enhancement
12. It is a form of electricity at rest.
A.Static charge B. Negative charge C. Positive charge D. Neutral
13.It is a factor in selecting electronic parts, the ability to provide exact value or
acceptable parameters to replacement parts.
A. Availability B. Price C. Quality D. Tolerance
14.An instrument used to check the resistance or continuity in the circuit.
A.Wattmeter B. Ammeter C. Voltmeter D. Ohmmeter
15.A part of the washing machine which is used to turn on/off the entire unit.
A. Switch B. Belt C. Tub D. Drain hose
II-TRUE or FALSE
Instructions: Write T if the statement is TRUE and F if the statement is FALSE. Read
the questions carefully and use separate sheet for your answers.
________1. All sides of the washing machine housing should fit accordingly.
________2. Clean the unit before doing the post-testing procedure is not necessary.
________3. Fix all the disassembled parts in the housing/compartment considering
the fittings/locks.
________4. Energize the unit to check its functionality.
________5. Plug AC cord while assembling the unit.
________6. Job report sheet is a form used by technician or serviceman to fill in all
informations during service.
________7. Installation acceptance testing means that the equipment is tested
immediately after it is installed to correct any errors in the installation.
________8. Warranty information is not necessary in purchasing new electronic product.
________9. Installation is the act or process of making a machine ready to be used in
a certain place, the act of installing something.
_______10. Parts list is excluded in the service manual.
_______11. Service manual is a handbook containing instructions and specifications for
the maintenance and repair of a certain equipment.
_______12. The information on how the equipment works and its limitation is found the
installation procedure.
_______13. Electronics technicians may also work as sales workers or field
representatives for manufacturers, wholesalers, or retailers.
_______14. Service manual is needed ONLY during repair and troubleshooting.
_______15. Installation Manual is a supplier’s manual for the installation of the
equipment, which will be delivered by supplier to owner together with the
purchased equipment.
BE-10-1S20202021
