PAGE 470
Specification Data Sec. 40
NOVEMBER 2014
Gasoline Engine Driven
Self Priming Centrifugal Pump
Models 82D‐GX160, 82D1‐GX160, 8M
82D2‐GX160 and 82D52‐GX160
Size 2” x 2”
Total Head Capacity of Pump in U.S. Gallons
per Minute (GPM) at Continuous
P.S.I. Feet Performance
41.6 96 30 30 30 30 30
39.0 90 50 50 50 50 50
34.7 80 67 82 82 82 82
30.3 70 75 97 108 108 108
26.0 60 79 104 124 139 139
21.7 50 81 107 130 144 144
17.3 40 83 108 134 152 156
13.0 30 84 109 135 157 164
8.7 20 85 110 136 160 170
Suction Lift 25' 20' 15' 10' 5'
PUMP SPECIFICATIONS
Size: 2” x 2” (51 mm x 51 mm) NPT ‐ Female.
Casing:
(82D and 82D1) Aluminum 356‐T6 w/Gray Iron 30 Cutwater Insert.
(82D2 and 82D52) Gray Iron 30.
Maximum Operating Pressure 67 psi (462 kPa).*
Semi‐Open Type, Three Vane Impeller:
(82D, 82D2 and 82D52) Gray Iron 30.
(82D1) Ductile Iron 65‐45‐12.
Handles 5/8” (15,8 mm) Diameter Spherical Solids.
Replaceable Wear Plate: Carbon Steel ASTM A36. Do not use in explosive atmosphere or for pump
Intermediate Bracket: Gray Iron 30. ing volatile flammable liquids.
Seal:
(82D and 82D2) Double, Grease‐Lubricated w/Spring‐Loaded
Grease Cup. Sintered Bronze Stationary Seal Seats. Steel Rotating
Faces. Maximum Temperature of Liquid Pumped, 110F (43C). ENGINE SPECIFICATIONS
Maximum Suction Pressure 10 psi (69 kPa)*.
(82D1 and 82D52) Type 31, Mechanical, Self‐Lubricated. Silicon Model: Honda GX160.
Carbide Rotating and Stationary Faces. Fluorocarbon Elastomers Type: Single Cylinder, Four Cycle, Air Cooled,
(DuPont Viton or Equivalent). Stainless Steel 316 Cage and Spring. Overhead Valve, Gasoline Engine.
Maximum Temperature of Liquid Pumped 160F (71C).* Displacement: 9.9 Cu. In. (163 cc).
Seal Liner (82D and 82D2): Copper Alloy C26000. Carburetor: Horizontal Type.
Seal Sleeve (82D1 and 82D52): Stainless Steel 304.
Lubrication: Splash System.
Flap Valve: Buna‐N w/Nylon Reinforcement; Gray Iron 30 and Sintered
Powdered Steel. Air Cleaner: Dual Element.
Suction Flange: Fuel Tank: 3.8 U.S. Qts. (3,6 Liter).
(82D and 82D1) Aluminum 356‐T6. Full Load Operating Time: 3.7 Hrs.
(82D2 and 82D52) Gray Iron 30. Starter: Rope Rewind.
Gaskets: Vegetable Fiber.
Hardware: Standard Plated Steel. Standard Equipment: Muffler w/Guard. Manual
Standard Equipment: 90 Discharge Elbow. Rollover Base w/Rubber Rotary Stop Switch. Manual Choke and Throttle
Feet. Control w/Top Speed Limit. “Oil Alert” Low Oil
Optional Equipment: Wheel Kit w/Semi‐Pneumatic Tires. Shut Down. Transistorized Magneto Ignition.
*Consult Factory for Applications Exceeding Maximum Pressure
and/or Temperature Indicated.
GORMAN‐RUPP PUMPS
www.grpumps.com
Specifications Subject to Change Without Notice Printed in U.S.A.
Copyright Gorman‐Rupp Pumps 2014
Specification Data MODEL NET WEIGHT SHIPPING WEIGHT EXPORT CRATE SIZE
APPROXIMATE 82D & 82D1 86 LBS. (39 KG.) 92 LBS. (42 KG.) 4.6 CU. FT. (0,13 CU. M.)
DIMENSIONS and WEIGHTS 82D2 & 82D52 97 LBS. (44 KG.) 103 LBS. (47 KG.) 4.6 CU. FT. (0,13 CU. M.)
SECTION 40, PAGE 470 WHEEL KIT ADD 25 LBS. (11,3 KG.); SHIPPING CRATE (SEPARATE) 3 CU. FT. (0,1 CU. M.).
GORMAN‐RUPP PUMPS
www.grpumps.com
Specifications Subject to Change Without Notice Printed in U.S.A.
Copyright Gorman‐Rupp Pumps 2014
