The first name in flame monitoring

and combustion control

Flame detection
.
and combustion
products for the
Petrochemical,
Refining and
Pulp & Paper
industries

fireye.com
 Paper Mill

Applications

Oil Refinery Black Liquor Plant

Sulfur Recovery Unit

Floating Liquified Natural Gas Platform

Ammonia Plant

Whether your application requires high flame sensitivity, high flame

discrimination, high safety integrity, explosion proofing or worldwide agency
approvals, Fireye has the product to fit the need.
 45UV5 SCANNERS SUREFIRE II HDHEI

Features: The SureFire

Reliable combustion
• Ultraviolet tube, II Heavy Duty
sensitivity deep High Energy
in the UV range

management product range for improved Igniter (HDHEI)

discrimination is designed for
• Adjustable sensitivity direct ignition
based on position of
of gaseous or
UV tube
INSIGHT SCANNERS PHOENIX SCANNERS SIMPLICITY SCANNERS SUREFIRE II HESI liquid fuels like light and medium oil, heavy
Specifications:
The Fireye InSightTM Fireye Phoenix 85UV, Fireye 65UV5 self- The SureFire II High- oil which can be steam, air or mechanically
• Optical range: 190-270 nm atomized.
Type 95IRS4, 95UVS4 extended 85UV (K3 checking scanners Energy Ignition System
• Supply voltage: 120 VAC, provided by
and 95DSS3 flame visual light) & 85IR QD are used to detect 25SU3/25SU5 amplifier is used for direct spark The igniter creates three sparks per second
scanners are micro- self-checking scanners ultraviolet emissions • Available in NEMA (Class I, Division 2, ignition of most gas or of a very high energy of 24 joules per spark,
processor based flame are used to detect from fossil fuel flames Group C and D) and Cenelec approved liquid fuels used in oil sufficient for self-cleaning of the rod tip and
explosion proof housing (Ex d IIC T6)
scanners utilizing solid ultraviolet emissions such as natural gas, or gas igniters or main for direct firing of heavy fuels in particularly
state infrared (IR), from fossil fuel flames coke oven gas, propane, methane, butane, burners. The High- difficult operating conditions e.g., wet, dirty
ultraviolet (UV) or dual (IR and UV) sensors. such as natural gas, coke oven gas, kerosene, light petroleum distillates and Energy Ignition System (slag, ash, unburned fuel) environments.
propane, methane, butane, kerosene, light diesel fuels. is available in various versions. To ensure This high energy igniter is intended for
The InSight Type 95 flame scanners
petroleum distillates and diesel fuels. They optimal operation, the first part of the ignition intermittent operation as a Class 3 special
incorporate an internal flame relay with The Fireye 65UV5 flame scanner UV1AL, UV90L & UV5 SCANNERS
are suited for application to duct burners, tip should always be in an ignitable fuel-air igniter.
adjustable ON/OFF thresholds, thereby incorporates an internal flame relay with a Specifications:
industrial gas burners, refinery applications mixture, during all modes of operation.
eliminating the need for a remote flame fixed ON/OFF threshold thereby eliminating • Optical range: 190- Features:
ignition systems and Low NOx detection 270 nm
amplifier. the need for an external flame amplifier. • Selectable voltage (115/230 vac).
and for continuous or non-continuous burner Models are available with a four-second or • Supply voltage: 560 • Visual indication of spark operation
The InSight scanners detect the presence or operation. a one-second flame failure response time VAC (supplied by
absence of a target flame in single or multi- control) • Proof of spark relay
The Fireye Phoenix type 85 QD flame (FFRT). • Choice of system, Integrated or Kit or Kit
burner applications. • Mounting threads:
scanners are microprocessor based devices 1/2” NPT SUREFIRE II HTI with Quick Disconnect
The Fireye 65UV5 flame scanner is powered
Features: utilizing a solid state flame detection sensor. • Thermal cutout protection integrated in
by 24 VDC and includes a quick disconnet • Operating The Fireye SureFire II
• Integrated design includes internal flame temperature: -40ºC transformer
The Phoenix flame scanners incorporate an High Tension Igniters
relay and 4-20mA output 10-foot (3 meter) four-conductor cable. A
to 94°C (40ºF to • ATEX options
internal flame relay with automatically set are a reliable source
• Keypad/display for programming color-coded internal LED indicates flame 200ºF)
ON/OFF thresholds, thereby eliminating the of ignition for natural
• Remote communications and file select status and alarm condition. This can be • Available in NEMA
capabilities need for a remote flame amplifier or flame (Class 1, Div 2, and forced draught gas
viewed through the removable rear access
switch. Group C and D) and
• Programmable flame flicker frequency, screw opening. Cenelec approved explosion proof housing igniters and pilots as
sensor gain, pull-in and drop-out set (EEx d IIC T6) well as small capacity gas burners. They are
Features:
points, and FFRT Features:
designed to ignite a mixture of various types μM-SERIES
• Automatic flame characterization • Fully integrated design includes internal
• 95DSS3 Infrared transmitter option of gaseous fuels with air. MicroM Flame
• Optimum gain and flicker frequency flame relay
Specifications: detection Safeguard controls
• No programming, minimal setting up, “out Features:
• 95IRS4 infrared sensor: 700 to 1700 nm • Fully automatic programming of the box” operation are compact, modular
48PT2 SCANNERS • Selectable voltage (115/230 vac)
• 95UVS4 ultraviolet sensor: 295 to 320 nm • Easy Installation • Superb detection, sensitivity and wide burner management
angle of view Specifications: • Visual indication of spark operation
• 95DS dual sensor: 295 to 320 & 700 to • Streamlined user interface, simplifies systems designed
operation • Field proven and reliable technology • Optical range: low • Proof of spark relay
1700 nm to provide automatic
frequency (12-25 • Choice of system, Integrated, junction box
• Supply voltage: 24 VDC • Flame learn cycle completes in less than • Worldwide safety agency approvals Hz) in the infrared or quick disconnect ignition and continuous
one minute range
• Housing: NEMA 4X, Class I, Division 2, • Rugged NEMA 4X (IP66) housing flame monitoring for ignition systems firing
• Background flame characterized in less • Spark & sense feature (-SS) allows for
Groups A, B, C & D • Truly economical solution • Supply voltage: 7 flame sensing via flame rod any type of fuel.
• Ex d IIC T6 ATEX than one minute VDC (supplied by
• Two versions covering world-wide the control) • Thermal cutout protection integrated in
Features:
• 95IRS4, 95UVS4 & 95DSS3: SIL3 Specifications: applications transformer
• Operating temperature: -40ºC to 60ºC • Diagnostic LED indicator lights
• 85UV Ultraviolet sensor: 295-320 nm (40°F to 140°F) • ATEX options
Specifications: • Selection of plug-in programmers and
• 85UV Ultraviolet extended sensor: 310- • Rated for NEMA 4X • Compact “co-axial” retractors
• 65UV5 Ultraviolet sensor: 190-270 nm amplifiers for greater flexibility
500 nm • Safety bleed resistor discharges
• Supply voltage: 24 VDC • Tray Cable – Exposed Run (TC-ER) and • Compatible with UV, UV self-check, IR,
• 85IR Infrared sensor: 830-1100 nm complies with the Standard for Metal Clad capacitors in 120 seconds.
flame rod, photo cell, and cad cell
• Housing: NEMA 4X, Class I, Division 2, Cable, UL 1569
• Supply voltage: 24 VDC • Portable options
Groups A, B, C & D • Remote reset capability
• Housing: NEMA 4X, Class I, Division 2, • Supply voltage: 120 VAC or 230 VAC
• Ex d IIC T6 ATEX
Groups A, B, C & D
• Ex d IIC T6 ATEX
 MBCE FLAME SENSOR

The Fireye MBCE-

Reliable combustion
110/230FR Flame
Sensor modules

management product range

provide both visual
indication and electrical
outputs that signal the
user regarding flame
SUREFIRE FORCED DRAFT & NATURAL BURNERLOGIX presence in a combustion chamber. NEXUS NX6100 / PPC6000 NEXUS NXF4000 / PPC4000
DRAFT GAS PILOTS
The Fireye The module uses Fireye flame rods to The Fireye NEXUS The Fireye NEXUS
Fireye SureFire II BurnerLogiX TM
System sense flame presence independently or NX6100 / PPC6000 NXF4000 / PPC
gas pilots are reliable is a microprocessor as components in a burner management Integrated Controller 4000 is an advanced
and suitable for a based burner system. is a microprocessor microprocessor based
majority of power management control based, Flame fuel/air ratio controller
The MBCE Flame Sensor provides a cost
generation, refinery and system designed to Safeguard and Parallel for industrial or
effective, self-checking method of monitoring
petrochemical applications. provide the proper burner sequencing, Positioning Combustion commercial burners
flames using the ionization principle.
ignition and flame monitoring protection Controller built into one compact, user firing gaseous or liquid FX SERVOS
The SureFire forced draft gas pilots are
on automatically ignited oil, gas, and Features: fuels.
available with an outer diameter of 32 or configurable package. The system consists The Fireye FX Series servomotors are
combination fuel burners. In conjunction • CE approved
48 mm, for intermittent or continuous duty of the Controller, Display, Temperature / Four programmable profiles are available precision actuators designed to accurately
with limit and operating controls, it programs • Self-contained: 110/230 VAC, 50/60 Hz Pressure Sensors, Servomotors and optional
and class 1 to 3 applications. The pilot is operation that determine the positional relationship position valves and dampers. The
the burner/blower motor, ignition and fuel Comfire Software.
constructed of high-quality materials and • Flame Rod compatible between all servo motors across the firing servomotor interprets Modbus commands
valves to provide for proper and safe burner
each unit is checked and tested before • Flame ON/OFF LED indicator Features: range of the burner. from an external control and uses a stepper
operation. Through SMART LED’s, the
dispatch. Provides a stable flame for ignition • 4-20mA permits direct reading of flame • Integrated fully functional and configurable motor to drive to the commanded position. A
The servo motors are controlled via a secure
control provides current operating status and signal strength flame safeguard
repeatability and no moving parts help feedback potentiometer provides continuous
Modbus communications link.
lockout information in the event of a safety • Built-in UV, UV self-check and IR detection
ensure long, troublefree operation with low • Uses CE approved 11-pin relay base positional information that can be read and
shutdown. Optional VFD and LCD displays • Compatible with Fireye InSight and Features:
maintenance costs. • Panel surface or DIN-rail mounting cross checked by the external control.
are available that may be either plugged in Phoenix scanners • 4 line 40 character dot-matrix backlit LCD
• Self-check Display Features:
or mounted remotely to give full language • Twelve key keypad eliminates fuel select
descriptors of current status and diagnostic BURNERPRO and burner switches • Four fuel profiles • Wide range of servomotors; 3, 15, 37 ft/lb

lockout information. • Industrially hardened 10.4” color • Up to ten 24 volt servomotors • 24 volt nominal supply voltage
The BurnerPROTM
Features: touchscreen option
provides the proper • Wide range of servomotors; 3, 15, 37 ft/lb • NEMA 4 IP 65 protection rating
Features: • Internal slot for optional VSD or Modbus
• Natural gas (NG), propane gas (PG) or • Modbus control means easy 4 wire hook • Modbus compatible communications
• Non-volatile memory retains history and burner sequencing, RTU card
hydrogen options up protocol.
present position ignition and continuous • Two VSD & one 4-20mA outputs standard
• Outer diameter 32 or 48 mm • Optional O2 trim, optional variable • 100° Maximum angle of rotation
• Consistent flame signal read-out flame monitoring for on VSD card
• Suitable for intermittent or continuous duty frequency drive • Available with quick disconnect connectors
• Read-out of main fuel operational hours commercial heating • Optional external Oxygen Trim Interface
• Suitable for Class 1 to 3 applications • Optional communications platforms or in a field wireable version.
and cycles and process equipment • Fireye proven Ziconia Oxide Probe or
• Designed for ignition of gas or oil main • Four user defined digital inputs
• Modbus communications via RS485 multi- Third Party Probe
burners firing oil and gas fuels. The system is
drop link • Two PID control loops
designed for use in non-permanent • Widest range of servomotors (24 and 120
• Compatible with 16 mm outer diameter volt) available
• Proof of fuel valve closure during off cycle
ignition rods with a coaxial electrode operations that requires burner recycle at
arrangement • Burn-in time of program parameters after • Two PID control loops
least once every 24 hours. Seven SMART
8 hours • Built-in sequencing for up to four boilers
• Compatible with Fireye high energy spark LEDs provide current operating status and
igniters (HESI) • Operator programmable run/check switch • Four fuel profiles O2 PROBE
lockout information in the event of a safety
• Compatible with Fireye high tension spark • Remote display mounting with NEMA 4 • Nine safety rated fully configurable digital The Fireye NXCES02 oxygen probe is Features:
igniters (HTI) complete with spark & sense protection shutdown. inputs
functionality (ionization flame detection) designed to be used with the PPC4000 and • Zirconium O2 trim
• Remote reset capability Features: • CANBus two wire communication
• Special design provides a protected provides continuous oxygen concentration • Exhaust temperature measurement
• Programmable communication baud rate • CE approved • Function Block Programming of PID with
ignition and flame stabilization zone in air readout readings allowing the PPC4000 to trim • High performance zirconium dioxide
tube Optional Abacus Software
• Self-contained: 110/230 VAC, 50/60 Hz the air or fuel servo to obtain optimum replaceable probe
operation
combustion efficiency. • Wide band oxygen sensor
• Diagnostic LED indicator lights
• Automatic detection by the PPC4000 via
69ND1 FLAME RODS • Selection of programmed operation The NXCESO2 offers fast, accurate Modbus-RTU
timings for greater flexibility response and excellent reliability when
The Fireye flame rod (69ND1) is made from • Available in 3 lengths
• Compatible with UV and flame rod, mounted in accordance with the installation
high temperature resistant metal and can be • Modbus interface
• Modbus and valve prooving options manual.
used to detect gas flames only. Avalible in • 3 status LED’s
multiple lengths.
Fireye is a leading manufacturer of flame safeguard controls and burner
management systems for commercial and industrial applications throughout the
world. Our products can be found in a variety of public buildings, commercial
properties, power plants, pulp and paper mills, petrochemical facilities and food
processing plants.

For more information, please visit fireye.com.

fireye.com
BR-00-2-000F-0-007-A (2024/02)
All trademarks and service marks referred herein
are property of their respective owners.
©2024 Fireye. All Rights Reserved. Join us on