D19- 42
Technical Data Sheet 01/2013
Specifications*
Energy Per Blow, Adjustable
Pump Setting 1 50 % 29.2 kNm 21,510 ft.lbs.
Pump Setting 2 66 % 38.0 kNm 28,035 ft.lbs.
Pump Setting 3 83 % 47.8 kNm 35,260 ft.lbs.
Pump Setting 4 100 % 57.6 kNm 42,480 ft.lbs.
Frequency 37 - 52 blows/min
Related Piston Stroke 3.2 - 1.6 m 10.5 - 5.3 ft.
Maximum batter w/o upper cyl. ext. 1:5 -
with upper cylinder extension 1:1 -
Fuel consumption at full load 7.6 L/hr. 2.00 gal./hr.
Oil consumption 0.6 L/hr. 0.16 gal./hr.
Approx. Weights
Hammer 3795 kg 8,365 lbs.
Piston 1820 kg 4,015 lbs.
Hammer with standard guiding 4400 kg 9,700 lbs.
Capacities
Fuel Tank 75 L 20.0 gal.
Oil Tank 19 L 5.0 gal.
Dimensions
A - Length 5610 mm 18.4 ft.
LH - Length, standard 5850 mm 19.2 ft.
B - Center to trip 356 mm 14.0 in.
B1 - Center to trip with cylinder 559 mm 21.0 in.
C - Center to pump guard 406mm 16.0 in.
D - Width of hammer 495 mm 19.5 in.
D1 - Width of trip 622 mm 24.5 in.
W - Minimum lead width 534 mm 21.0 in.
*Technical data are subject to change without prior notice
Operating energy based on piston stroke - values are approximate.
Hydraulic start optional.
BAUER-Pileco Inc.
100 N. FM 3083 East, Conroe, TX 77303
Ph.: (713) 691-3000
Fax: (713) 691-0089
E-mail: [email protected]
www.bauerpileco.com
