Location : Karnataka, India
Mobile : +91 7092966370
PROFESSIONAL SUMMARY
Dedicated & Solutions-Focused quality control professional with more than 06years
of manufacturing industry expertise in automotive components manufacturing and
special talent for searching out opportunities for improvement, contributing to
customer PPM reduction, warranty cost ratio reduction, scrap cost reduction and
waste reduction. Expertise in preparing, reviewing, and commenting Quality
Projects, Procedures, Work Instructions, Safety & Health Manuals for projects in
accordance with International Codes and compliance to regulatory specifications
and contract requirements. Working as a crucial resource for Corporate Quality
department instilling a culture of process improvement, ensuring integration &
standardization of its quality services across the various production lines.
KEY COMPETENCIES
WORK EXPERIENCE
IATF 16949:2016 (Required documents
preparation)
TITAN WATCH DIVISION ISO 9001:2015 (Required documents
APPRENTICESHIP – QC | FEBRUARY 2017 – FEBRUARY 2018 preparation)
PPAP
▪ Expertise In process quality, including close interaction with internal
SPC
customer as a key member for quality activities such as QA plan, MSA
Technical meeting, Sample submission and trials. CARL ZEISS CMM HANDLED
▪ Take containment action and permanent countermeasure to meet the 8D & CAPA
expectation of internal customer in case non-conformance part PROCESS AUDIT
PRODUCT AUDIT
reporting in 7QC steps.
▪ Monitoring complaint, ensure daily management activities on basis of
in-house complaints, educating customer expectations as per customer SCHOLASTIC
SQAM requirements. • B-Tech in Mechanical
▪ Identifying training Conduct Process and system audit though out the Engineering (65 %) Indian
operation and responsible for NC closure and Counter-measure Institute of Industry
sucesstence. Interaction Education and
research (2016 -2019).
SCHAEFFLER INDIA LTD. • Diploma in Mechanical
JUNIOR ENGINEER QUALITY CONTROL |MARCH 2018 – MARCH
2021 (NEEM SCHEME) Engineering (70 %) from
▪ Customer window person for claims receiving to till resolution, Adhiyamaan Polytechinc
claims information, quality and warranty flash, part collection and
analysis based on 8D, countermeasure submission and monitoring college Affiliated to DOTE
the effectiveness. (2012-2015)
▪ Conduct the simulation study at both Customer and dealer end to
confirm the failure mode and analyse the component in house and at • 10th ( 60 %) from New
supplier for root cause.
Government Boys High
▪ Create PROCESS FLOW DIAGRAM , FAILURE MODE EFFECTIVE
ANALYSIS , CONTROL PLAN & WORK ELEMENT SHEET for School Hosur affiliated to
product quality control as per customer approved drawing and
State Board New Syllabus
special requirements.
▪ Take containment action and permanent countermeasure to meet the Samacheer Kalvi (April
expectation of customer in case non-conformance part outflow.
2012)
▪ Monitoring customer complaint, ensure daily management PERSONAL DETAILS
activities on basis of in-house and customer complaints, •
educating customer expectations as per customer special Date of Birth 16-06-1997
requirements, responsible for customer return part analysis and Marital Status Un Married
quality flash Nationality Indian
▪ Planning, organizing and implementing the internal audits and
focus assessments and ensuring the implementation of appropriate
SCHAEFFLER INDIA LTD.
▪ Planning, organizing and implementing the internal audits and focus assessments and ensuring the
implementation of appropriate corrective action to rectify the system defects.
▪ Initiate all process, supplier, engineering change with customer PPAP submissions and requirements in the case
of new product launch.
CASCY FORGING
ENGINEER QUALITY CONTROL| JUNE 2021 – MARCH 2022
▪ Handling customer like ASHOK LAYLAND, SCHAEFFLER INDIA, WABCO & MAINI PRECISION to resolve the
problems
▪ Conduct internal Process audit as per IATF 16949 and ensure work area is well aligned to Cascy’s 5S standards.
▪ Conduct audit for customer critical characteristics in house and at vendor manufacturing line
▪ Providing input & decision making for quality on the shop floor with regard to manufacturing & deviations
▪ Perform Tolerance stack analysis to ensure proper fit & function using measuring tools. fluent in application &
interpretation of Latest GD&T
▪ To control the scaling, un-fill, pit-mark in forging temperature display using Byrometer.
▪ Different temperature parts are separated using PLC controller
▪ Low Temperature parts can reuse after shot-plasting process
AEQUS ENGINEERING PLASTIC
LEAD ENGINEER QUALITY | MARCH 2022 – TILL
▪ Perform mould change & sample runs according to machine Schedule
▪ Analysis moulding defect, & process parameter adjustments within validated limits to optimum quality results
▪ Components inspecting for process & Product
▪ Inspect or measure finishing work pieces to determine conformance to specifications, using measuring
instruments such as gauges or micro meter
▪ Working to eliminate & reduce quality issue reported internally & externally
▪ Educate & trained teammates in quality & manufacturing techniques as per requirements
▪ Maintaining effective working relations, communications, & feedback with all other departments
▪ Identify & Implement improvement with manufacturing teams that improve quality & maximize customer
satisfaction
▪ Ability to generate Quality plan, Quality Format, OPL, WI, Work Element sheet, procedures.
▪ Pre- Dispatch inspection Report, ensure control of NC reports, ensure identification implementation of counter
measure action for any defect line quality problems.
▪ Perform laboratory inspection of parts as per BIS requirements, for electrical & for non electric products
▪ ISO 9001-2015 certified internal auditor in quality management system.
▪ Conduct monthly review meeting with CFT to achieve the monthly PPM
▪ Set the target to team members to achieve Zero complaint.
DECLARATION
I hereby declare that all the information furnished in this document is true to my knowledge and belief
RAHUL RAGAVENDRA V
