Before Operation

Quick Start
Initial Camera Setup

Camera
Features/Functions

Recommended
Accessories

Operating Tips

Customer Service &

Warranty

! PLEASE READ CAREFULLY BEFORE USE

Additional information on this product and
answers to frequently asked questions
can be found at www.primos.com
© 2012 Primos® Hunting
 ! PLEASE READ CAREFULLY BEFORE USE

IMPORTANT
For your protection, please carefully read these warnings, precautions and safety/operating
instructions completely before operating the camera. Follow these instructions closely and
keep this manual for future reference.
WARNING
To reduce the risk of fire, electrical shock or product damage/failure,
- Do not expose unit with the door open to rain, moisture, dripping or splashing. Do not open
or close the camera door with wet hand. Completely wipe off water on camera and camera
door before opening.
- Do not lay product on moist ground or submerge in water (this unit is designed for vertical,
upright outdoor use)
- DO NOT OPEN CASE HOUSING. UNINSULATED, ‘DANGEROUS VOLTAGE’ WITHIN PRODUCTS
ENCLOSURE. DO NOT REMOVE FRONT OR BACK HOUSING COVER. THERE ARE NO USER
- SERVICEABLE PARTS INSIDE, REFER SERVICING TO PRIMOS® CUSTOMER SERVICE.
- Only use batteries as specified in this user manual and install according to correct
polarization. Failure to follow may result in leaking or exploding batteries, damage to camera,
fire or personal injury. Do not handle damaged or leaking batteries.
- Do not expose to extreme heat. Do not leave product and/or batteries exposed in direct
sunlight inside a vehicle, or other contained environment for a long period of time.
- Only use accessories as recommended in this manual
CARE & CAUTION
- Transport and handle with care. Do not strongly shake, bump, hit, drop or otherwise
cause impact to the camera – can result in camera malfunction, damage to lens, sensor,
LCD screen, or other key components. Additionally, damage to the case could result in
imperfections to water-resistant properties.
- Take extra care when handling or using camera in places with sand and dust. Sand, dust and
foreign substances exposed to camera lens, PIR sensor, LED array and/or the internal door
panel components may result in poor picture quality or malfunction of camera. If exposed to
any of these elements, please carefully wipe off completely before continued use.
MODIFICATION WARNING
You are cautioned that any changes or modifications not expressly approved in this manual
could void your warranty of this equipment.
OPERATING TEMPERATURE
- Recommended storage temperature range -100F to 1400F
- Recommended operating temperature range 200F to 1200F
WARNING
To avoid possible camera, battery or other damage and/or injury, NEVER ATTACH A BATTERY
to the camera’s external 6V DC power port while other batteries are installed in the camera. The
6V DC power port is designed to be used as the ONLY power source, do not install batteries in
the camera while using this external battery source (*This will void your warranty).
 Simple to Use
Simple to Understand

ONLINE SUPPORT

Instructions Video Clips

Visit www.primos.com/TruthCam for

Instructional Video Clips.

Visit www.primos.zendesk.com for FAQ,

PDF Manuals, Camera Support or to open a
Troubleshooting Ticket.
 Table of Contents

Before Operation
Needed to Operate 1
Select SD Card Size 2
Identify Parts 3
Understand Sliding Switch & Button Functions 4

Quick Start - Initial Camera Setup

Easy 6 Step Setup 5
Camera Settings Backup Battery 6
Camera Status Lights 6

Camera Features/Functions
Camera Sensitivity 7
Time/Date 7
Format 8
Viewing/Retrieving Image 9
Clearing SD Card 10
Power Saving Sleep State 10
Image Stamp 10

Recommended Accessories
Featured Primos® TRUTH® CAM Accessory 11
Other Accessories 11

Operating Tips
Important Notes 12
 Customer Service & Warranty
Contact Info 15
Warranty Protection 15

Introduction

TRUTH® CAM’s - Now with ZERO Photo Capture Noise &

Up to 200% LONGER BATTERY LIFE
Thank you for choosing a Primos® TRUTH® Cam, we know you have choices
and we appreciate you choosing us. Our goal at Primos® is to provide products
for hunters that are reliable and “Simple to Use”. This past year we have been
honored by getting so much feedback from you our customers. The TRUTH®
Cams are some of the most highly rated products within the Game Camera
category. We appreciate the positive feedback as well as input on how to make
our products even better.
This year we have made some major improvements to our TRUTH® Cams. All
TRUTH® Cams now have a 1 second trigger speed, ZERO Photo Capture Noise,
increased 32GB SD Memory card support and up to 200% LONGER Battery
Life. We like you are always pushing to make our time afield more productive
and fun. The TRUTH® Cam has all the features you want in a game camera that
is “Simple To Use”.
 TRUTH® CAM BLACKOUT™ CR
INSTRUCTION MANUAL

Included:
1. TRUTH® Camera (1)
2. 72” Mounting Strap (1)
3. Instruction Manual
4. Warranty Registration Card

BEFORE OPERATION

Needed to Operate:

1. Four (4) “D” size Alkaline or Rechargeable Batteries

2. One or more SD Memory Cards
(Camera will support up to 32GB SD or SDHC Cards)
Note: If no SD Card is installed ‘SD’ will display on initial menu screen
3. SD Memory Card Reader or other device to view image/video files
on SD Card. (Many computers have a SD Memory Card slot built-in)

1
Select SD Card Size
This chart allows you to see the approximate capacity of 1GB, 2GB, 4GB, 8GB, 16GB
& 32GB SD Memory Cards. Check to see what [megapixel] photos or [resolution] videos
that will be best for your SD Card.

*Photo/Video SD Card Storage Capacity

1GB 2GB 4GB 8GB 16GB 32GB

Day Photos 3.1MP 820 1,650 3,300 6,610 13,220 26,440

Night Photos 1.3MP 3,300 6,660 13,330 26,660 53,320 106,640
Video 10S High Res 50 100 200 400 720 1,440
Video 30S High Res 20 40 90 180 360 720
Video 60S Low Res 70 140 280 570 1,140 2,280
*Approximation - photo/video sizes vary based on individual image details

2
Identify Parts
STATUS VIDEO DELAY MULTI SENSOR
SHOT
OFF 10s 10s 1 HI

PHOTO 30s 1M 3 NORM

Non Visible LED Lights
STATUS VIDEO60sDELAY30MMULTI5 SENSOR
VIDEO LO
SHOT

SET/WAKE UP DOWN

CLOSE UP VIEW OF CAMERA BUTTONS

Camera Lens

Door Latch with

Optional Pad Locking Hole

PIR Motion Sensor

STATUS VIDEO DELAY MULTI SENSOR

SHOT
OFF 10s 10s 1 HI

PHOTO 30s 1M 3 NORM

STATUS VIDEO60sDELAY30MMULTI5 SENSOR

VIDEO LO
SHOT

“D” Battery
SET/WAKE UP DOWN
Compartments

Through Housing
5/16”Security Cable Hole

Mounting Strap Slots

Brass Inserts
(For optional
Attachment Accessories)

SD Card Slot
Rubber SD Card Cover External Battery Port Tree Gripping Teeth
(Optional 6V DC)

Bottom View Back View

3
UNDERSTAND SLIDING SWITCH & BUTTON FUNCTIONS

SLIDING SWITCHES
Status - Select PHOTO or VIDEO -
this turns “ON” the unit. Move switch
to “OFF” to shut off the unit.
Video - Video recording length (only
relevant if camera status is set to VIDEO) .
Delay - The pre-set amount of
time you desire between photo/
video recordings.
Multi Shot - Number of pictures taken
each triggering event (only relevant if camera status is set to PHOTO).
Sensor - Motion Detector Sensitivity. Use ‘NORM’ as default see (page 7).

BUTTON FUNCTIONS
- Use to navigate (scroll up or down) between number of pictures
‘0000’, date or time.

Set - While on date or time screen, press SET button to change settings.
Use buttons to adjust setting & press Set again to save.

TIP: See page 8 for formatting SD Card using this camera

LCD Screen Notes -

1. Initial main screen displays number of
pictures ‘0000’ and battery life.
2. Use buttons to see date or time.

4
 QUICK START INITIAL CAMERA SETUP
Easy 6 Step Setup

1. Install Batteries - Uses four (4) “D”

size Alkaline or Rechargeable batteries.
(Note: Camera identifies fully charged rechargeable SD Ca
rd

batteries, such as NiMH, as less than 99% on battery

indication level. Rechargeable batteries run on
different voltage and cause this variation. Most fully
charged rechargeable batteries will show 50-60%.)

2. Install up to 32GB SD Memory Card (not included) into the card slot
on the bottom of the camera. If SD Card is not installed, camera will display
“NO SD” on Initial Primos Menu Screen. (Note: SD Card Slot is protected by rubber
seal [plug]. Open door of the camera and gently rotate seal from slot. After SD Memory Card is
installed, replace rubber seal in original position to prevent moisture and elements from entering
camera and possibly causing malfunction.)

3. Secure Camera to Tree or Pole using included Mounting Strap

(must thread strap through Mounting Strap Slots on back of camera).

4. Turn On Camera and Slide Switches to desired settings. The LCD

screen will turn on and show the number of photos/videos on SD Card.

5. Setup-Time and Date -Push UP or DOWN to find Time and Date

screens. While on respective screen, press Set button and then buttons
to adjust selected field.

5
6. Your camera is ready to use! After a 30 second delay the TRUTH®
Camera will be armed and ready to take pictures whenever the Motion
Sensor detects motion or movement. (NOTE: TEST camera before placing in field/
woods. Run camera in live “On/Run” mode and make sure Photos/Videos are being saved on
SD Card.
Camera Settings Backup Battery
*** This TRUTH® Camera is equipped with an internal rechargeable backup
battery that is dedicated to saving the date, time and menu settings when the
main D-cell batteries are removed. This internal backup battery can preserve
your settings for up to 6 months when fully charged. (NOTE: With first use or after
a long period of time without camera use, internal battery may initially take up to 30 hours to fully
charge - charges only when “D” batteries are installed when camera is turned ON.)

6
 CAMERA FEATURES/FUNCTIONS

Camera Sensitivity (Sensing) - Motion Detector Sensitivity. Use ‘Normal’ as default.

You can adjust the sensitivity of the Passive Infrared (PIR) Motion Sensor on your camera.
The PIR sensor detects motion AND the difference between body heat and the outdoor
temperature. Therefore, adjusting the sensor affects the DISTANCE and HEAT SENSITIVITY of
the detection.

TIP: It may not always be best to use ‘high sensitivity’ to see how far away you can capture
images of game. If the game is closer when the camera is triggered, you will end up with better
pictures/videos. You can learn what is best for your situation; here is a summary of the settings:

High Sensitivity
• Use when trying to detect game at further distances (in fields or open areas with long-range visibility)
• May use in warmer months or high heat climates so it is easier for sensor to detect difference
between body heat and outdoor temperature.
• May use when trying to capture photos of smaller game.

Normal Sensitivity
• Optimized to work best in most conditions and for normal use

Low Sensitivity
• May use if you have the camera setup in a location that is getting a lot of ‘empty’ photos
(false triggers)
• May use if you are getting a lot of hard-to-see long range photos of game (more likely in colder
temperatures or with larger game) and would like game to get closer before camera captures images.

Time/Date – Time/Date setting in camera will be displayed on pictures

and video. (NOTE: Time recorded on Photos & Videos will be in 24hr (Military) format )

7
 Format - To Format SD Memory Card installed in camera – this DELETES
ALL PHOTOS OR VIDEOS or any other data on memory card!!!

To proceed with formatting:

1. Hold UP and DOWN arrow buttons
together for 2 seconds.
2. Format is complete when the display shows photo/video count ‘0000’.

!!CAUTION!!
No WARNING is displayed when holding down both
arrow buttons in formatting SD Card process.
This DELETES ALL PHOTOS OR VIDEOS or
any other data on memory card!!!
STATUS VIDEO DELAY MULTI SENSOR
SHOT
OFF 10s 10s 1 HI

PHOTO 30s 1M 3 NORM

VIDEO Hold Down

STATUS VIDEO60sDELAY30MMULTI5 SENSOR
LO
SHOT

SET/WAKE UP DOWN

Example: Holding down both “UP” and “DOWN” arrow buttons

8
Viewing / Retrieving Images
Explore these various methods for viewing TRUTH® Camera photos/videos:
1. Remove SD Memory Card from slot in bottom of camera.
2. Replace with separate, fresh SD Card if you want camera to continue working.

How to View Images/Videos

1. View images/videos with SD Card
directly in computer.
If available you can view images/videos by inserting SD Card
directly in SD memory card reader slot in computer.
(NOTE: When using a computer you can view and delete images
directly from SD card or you can copy and store files to your SD

computer. Once files are safely stored on computer, you can

delete from SD Card to clear the space for next camera use.)

2. External USB memory card reader

If your computer doesn’t have an SD Card reader built in, SD

you can view images/videos by attaching USB memory

SD
card reader to your computer.

3. Game Camera Viewer. GAME CAMERA VIEWER

You can view images/videos using a portable device

SD

designed specifically for game cameras.

4. Other portable handheld devices

If convenient you may try viewing images/videos using
other portable handheld devices such as: digital cameras,
GPS, etc...
(NOTE: Many digital devices with viewing screens will display
pictures taken by the TRUTH® Camera. You can try these
alternative viewing devices at your own risk -- not all devices
with SD memory card slots will read video and or photos
recorded on other devices.)

9
Clearing SD Memory Card
*** If SD card has been used in any other devices, format the card
before use in TRUTH® Cam.

Formatting the SD Card on your home computer erases all images and Data.
To clear photos using TRUTH® Cam, see ‘FORMAT’ under
‘CAMERA FEATURES/FUNCTIONS’. (Page 8)

Power Saving State

When the TRUTH® Camera is powered on, the LCD menu screen will
automatically turn on. If menu is left inactive (no settings changed or button
pushed) for 30 seconds, the camera will automatically switch to “RUN/ON”
mode and LCD screen will enter into a power saving state.
(NOTE: The camera is active and ready to take photos/video when LCD is in a power saving
sleep state.)

The LCD screen can be awakened by pressing any button.

(NOTE: The LCD menu will not wake up from Power Saving State while the Green Status Light
is on. Wait until after Green Light turns off to WAKE up LCD screen.)

Image Stamp

MOON TEMP DATE TIME MODEL

10
 RECOMMENDED ACCESSORIES
Featured Primos TRUTH® Cam Accessory
®

• Makes Every Camera have Better Vision

• Easily rotate your camera to get the
PERFECT SHOT
• Fits ALL camera brands
• Install camera high in tree for better
Included: view and security
• Magnetic connection socket allows
camera to quickly attach/detach from tree
• Includes T-Post adaptor for surveillance
without trees

Tree Compact Primos® Universal

Bracket Camera Mount Camera Mount
(Works with ALL
Camera Brands)
Other Accessories
1. Padlock for door latch to prevent tampering camera settings or memory
2. Locking Security Cable to run through case and around tree. Master Lock®
Python™ Adjustable Locking Cable is convenient and highly recommended.
3. 6V DC External Battery for those needing extended battery life for remote
or extremely active locations (plug into bottom of camera)

11
 OPERATING TIPS

IMPORTANT NOTES

Learning to use your TRUTH®Cam – Visiting www.primos.com/TruthCam and

watching our Instructional Video Clips is the ‘easiest way’ to learn ‘how to use’ your
TRUTH® Camera!

Troubleshooting or Questions – Before calling customer service, visit www.primos.

zendesk.com to find troubleshooting tips, frequently asked questions and answers, as
well as any updates

Camera ‘Menu’ Mode or Camera ‘On/Run’ Mode - Your TRUTH®Cam only has two
modes when powered on.
Menu Mode - If the LCD screen is on displaying the menu or text, the camera is in
‘Menu’ mode and will not take pictures/videos during this time. If the LCD menu is left
inactive (no buttons are pushed) for 30 seconds, the camera will automatically go into
a power saving state.
ON/RUN Mode - The LCD display will turn off and the camera has switched to ‘On/
Run’ mode and is ready to start taking pictures/video. You can also press the Run/
Wake button to quickly exit menu and turn camera into active ‘On/Run’ mode (30
second countdown will begin). When the camera is in the ‘On/Run’ mode, you must exit
the power saving state by hitting the SET/WAKE button to enter back into the camera
‘menu’ mode.

Waking Up LCD Menu – The LCD menu will not wake up while the Green Status Light is
on or blinking. Wait until after Green Light turns off to WAKE up LCD screen by pressing
SET/WAKE.

Battery Life – Long battery life is one of the most important requirements for convenient
and enjoyable game camera use. There are several variables that will determine the battery
life including type of batteries, temperature outside, image/video settings and frequency
of camera activity. Colder temperatures, more advanced image/video settings and high
photo frequency (low camera delay) will result in shorter battery life. Different brands of
batteries may also perform much better than others, so please experiment to find what
works best for you. (NOTE: Capturing videos uses more power and will result in shorter battery
life than capturing photos.)

12
Internal Rechargeable Backup Battery - With first use or after a long time period of
camera storage, internal battery may initially take up to 30 hours to fully charge (charges
only when “D” batteries are installed when camera is turned ON). Once charged, this
backup battery is dedicated to saving the date, time and menu settings when the main
D-cell batteries are removed.

Camera Mounting Height – Three feet from the ground is usually a good height to mount
the camera, but it depends on the type of game and ground terrain. The Primos® 20/20
Mount makes mounting easier and allows photo capture from the angle of your choice
(versus relying on the tree).

Blurry Image Quality – Primos® takes pride in the quality of images captured by the
TRUTH®Cam. However, this is an outdoor product that will be constantly exposed to
different/changing conditions that can affect the quality level. Blurry images typically result
from objects causing interference between the camera and the intended focal point (game
too close, brush, trees, etc). Blurry images may also be the result of direct sunlight, fog,
condensation (dew), water droplets, snow/ice, dirt, dust or other debris on the camera
lens. Carefully cleaning the camera lens window, making sure there are no scratches and/
or placing the camera in a different location may solve this type of problem.

Blurry Image Quality – Motion – Primos® takes pride in the quality of images captured
by the TRUTH®Cam. With available technology, there was no way to eliminate the potential
of photos with blur caused by game moving (motion) too quickly. We have optimized the
TRUTH®Cam to limit the number of motion blurred images and provide as many clear,
quality photos as possible.

Dark or Light Image Quality – Primos® takes pride in the quality of images captured
by the TRUTH®Cam. As daylight transitions back-and-forth between light and dark, the
camera changes settings to optimize the picture. Some ‘lighter’ or ‘darker’ photos may be
captured during the camera transition process – this should be a limited amount of photos
with the optimization of our software. Also, please try to avoid setting up the camera in
situations where the sunlight will shine directly into camera lens. With any photo capturing,
taking pictures directly into sunlight produces less than desirable results.

Empty Photos/False Triggers – If there are a large number of photos taken with no
game present in the frame, first make sure your camera is mounted at the correct height
and in the right direction. If there are limited, random photos with no game present, the

13
following scenarios are most likely (TIP: Setting up camera too close to a runway can make
the FOV narrow and game can pass in less than 1 second) 1) an animal ran through the picture
extremely fast or 2) a smaller animal/bird is around the camera/sensor but is not in the
camera field of view or 3) the sunlight or heat in combination with moving elements (trees,
brush, shadows) is causing a false trigger. The first two scenarios are hard to prevent, but
the sunlight/heat should not cause many false triggers as the camera has been optimized
to sense and distinguish for correct triggering. To prevent potential false triggers, try not
to setup the camera directly in the sunlight. You may also change the Camera Sensitivity
Setting according to your situation.

Camera Doesn’t Save Photos/Video – The SD Memory Card may be locked. Please
look closely at the card and make sure the card is in the ‘unlocked’ position. If photos/
videos are still not saved by camera activity, the SD Memory Card may be corrupt or
damaged. You can try to reformat the card on a computer and try it again, or simply try
replacing it with a different/new SD Memory Card.

Storing Camera – Do not store in extreme heat, cold, moist or humid conditions. Remove
batteries when storing for periods for longer than one week without use.

Operating Temperature - Recommended operating temperature range is 200F to 1200F

and recommended storage temperature range -100F to 1400F

Inside Camera Operation – The camera is designed for outdoor use. It is ok to test the
camera indoors for operation, but please note the indoor lighting and reflection may not
be optimal for correct photo exposure and video recording.

Keep Clear of Debris - Keep the small water drainage hole on the camera door (running
from top lip to external window) clear of debris. This drainage hole allows any water that
happens to get on top of the door lid escape. If this hole is plugged and not allowed to
drain, the water can possibly enter the inside of the door (even when closed) and cause
permanent damage to the camera.

14
 CUSTOMER SERVICE & WARRANTY
WARRANTY
You MUST register your Truth® Cam online within (30) days of receipt to
receive the 1 Year warranty and present a “Proof of Purchase” to receive
warranty protection. If neither of these are presentable, we will not replace
your item.
Up to 1 YEAR LIMITED WARRANTY
Primos® Hunting (“Primos”) warrants the TRUTH®Cam to be free from defects in workmanship and
materials, under normal use and conditions, for the time periods and terms as set forth below.
According to this Limited Warranty Primos® will, at its discretion, (a) repair the production using new
or refurbished parts or (b) replace the product with a new or refurbished product (product that has
been returned to its original specifications). In the event of a defect, these are the exclusive remedies
available to the original consumer purchaser only and is not assignable or transferable.
Terms: You must register your TRUTH® Cam and keep the “Proof of Purchase” receive
warranty protection. You MUST keep a receipt for “Proof of Purchase” for any warranty
claims on your Camera.
**Go online to www.primos.com/registration and complete the Online Registration. You have 1
month from date of purchase to register your TRUTH® Cam online.

** visit www.zendesk.com for FAQ, PDF manuals, camera support or to open a troubleshooting ticket.
Limitations: This warranty is valid only if the product is used for the purpose for which it was designed.
It does not cover: 1) products which have been damaged by negligence/misuse (including, but not
limited to, improper storage, battery leakage and water damage caused by submersion), accident or
which have been modified or repaired by unauthorized persons; 2) cracked or broken housing of units
damaged by excess heat or impact/force; 3) damage caused by wild animals 4) the cost of shipping
this product to the factory for service and its return to you.

Instructions:
In the event warranty service is needed, please contact Primos® Customer Service ([email protected]) to
obtain a Return Merchandise Authorization (RMA) number. Once you have secured a RMA number, you will
be required to:

1. Write RMA number in large/visible print on outside of package.

2. Remove SD memory card and batteries from product and pack in well-padded or highly protective
box. Primos® Hunting will NOT be responsible for damage incurred in returning product for repair.

3. Include Return Form and “Proof of Purchase” in with return.

4. Send product prepaid to: Primos® Hunting

RMA #
604 First Street
Flora, MS 39071

15
 FCC STATEMENT
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help

TRUTH® CAM BLACKOUT™ CR

Model No. 63037

DISCLAIMERS
Primos makes no representations or warranties, either expressed or implied, by
®

or concerning any content of these written materials or software, or for damages

resulting from the use of the information contained therein. Primos® reserves the right
to alter the features and contents of this publication, hardware or software without
obligation or advance notice.
Warranty does not extend to any accessories used with the camera.
Primos® is not responsible if you use the TRUTH® Cam for illegal purposes.

Primos® shall not be obligated to perform preventative maintenance, installation,

deinstallation, or maintenance.

The illustrations in this manual are for instructional purposes only and may not
represent actual product exactly.
16
 IMPORTANT RETURN POLICY
Please contact the Primos® Customer Service Team with any comments, questions,
problems or return requests. Call (601) 879-9323 or email [email protected].
RETURN THIS PRODUCT TO PRIMOS® HUNTING
DO NOT SEND BACK TO THE STORE

604 First Street, Flora, MS 39071 • Office 601-879-9323

• Orders 1-800-523-2395 • Fax 601-879-9324 • primos.com
Printed in China