Desigo Room Automation

The unique solution for enhanced comfort and productivity

Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

Contents

01 Key differentiators of Desigo Room Automation

Benefits for users

02 Proof points and scenarios

Benefits for engineers

03 • Configurable controllers
• Programmable controllers

04 Good to know

Page 2 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

Key Take-aways

Avoid the spread of disease Meet your CO2 reduction Change the configuration of
and improve employee targets by using only the the rooms with a few clicks
performance with indoor air energy needed in the room in an open system that
quality control and human through an exchange with controls HVAC, lighting and
centric lighting. the building plant. shading.

Seite 3 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

Innovative and unique technology from Siemens Desigo Room Automation

Integrated room Green Leaf

Links all disciplines within a room Engages room users to actively involve
and ensures the perfect interplay and reset energy consumption to the
between HVAC, lighting and shading optimal level

Flexible room
The scalable system concept allows RoomOptiControl
you to stagger your investments and Innovative and unique energy
offer potential tenants more design efficiency functions detect
freedom unnecessary energy consumption

Room
Demand-controlled supply
Exchange of demand signals from Room
Automation with primary plant is the key
Primary

Seite 4 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

Desigo Room Automation from Siemens pays off to its users

Effectiveness and efficiency

Maximum productivity and assured comfort

Investment protection and flexibility Profitability

Energy efficiency and true cost savings

Lower costs

Page 5 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

Unique room concept to ensure the perfect interplay between HVAC, lighting and shading

Today, components of a typical building Coordinated interaction based on intelligent

still operate independently functionalities from all disciplines

Desigo Daylight Constant Emergency more

Room dependent

Desigo
Light Lighting

Automation Room
Glare Daylight more

Automation
protection harvesting

Shading

Heating Cooling Quality Ventilation

Shading

Page 6 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

Unique Green Leaf involves room user to save additional energy

Room 403

20.0 °C
Green Leaf

Room

Desk

Blind
• Meeting takes place
• Room users open blinds on a sunny day
20.0° C
• Sun radiation adds additional heat load to the room
Setpoint
• The cooling uses more energy to maintain setpoint
• Red leaf indicates suboptimal operation

Page 7 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

Unique Green Leaf involves room user to save additional energy

Room 403

20.0 °C
Green Leaf

Room

Desk

Blind
• Press on red leaf restores energy-optimal operation
• Blinds are closed but allow glare-free lighting
20.0° C
• Room temperature is assured with lower energy need
Setpoint

Page 8 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

Desigo Room Automation optimizes comfort by using less energy

RoomOptiControl automatically detects unnecessary energy consumption in the room

ON
OFF

Shading

25.5 °C 22.5 °C

Potential for energy savings and low comfort Energy-optimized room with enhanced comfort

Without Desigo Room Automation With Desigo Room Automation

Page 9 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

Weather functions prevent damage

Blinds
are raised to prevent damage
caused by wind and storms

Page 10 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

Shading functions enhance comfort,
save money and ensure aesthetics

Blinds
are optimally adjusted to minimize
glare, to make use of natural light and
to protect from the heat and the cold

Ensure synchronous layout of

building facade

Page 11 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

Emergency functions increase safety

Blinds
are raised to rescue people,
lights turn on and ventilation
adjusts to increase safety

Page 12 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

Constant light control saves money while enhancing comfort

Artificial lights
are switched on/off and dimmed
depending on natural light
and information from presence
detectors

Controlled by integrated
brightness sensors

Page 13 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

Better indoor air quality increases room users’ efficiency while saving cost

Desigo Room Automation balances

comfort and energy consumption

Ensures efficiency with demand-

controlled ventilation

Display on sensors and room

units make air quality visible

• Poor air quality affects people’s productivity

• More fresh air may require more energy, therefore
only the minimum amount of fresh air should be introduced

Page 14 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

Highest energy efficiency with demand-controlled ventilation

Only the required energy is provided

Room 1 by the air handling unit/chiller/burner

Exchange of demand signals from Room Automation

with primary plant is the key
Room 2
Central functions are part of the tested
library and can be easily configured

Comfort is never compromised

Room 3
BACS efficiency classes – DIN EN ISO 52120-1
(former EN 15232)
• Highest energy performance, BACS and TBM
• Advanced BACS and TGM
• Standard BACS
• Non-energy-efficient BACS

Page 15 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

Flexible floor usage using room segmentation concept
with no need for rewiring or reengineering

Shading Shading Shading Shading

Page 16 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

Flexible floor usage using room segmentation concept
with no need for rewiring or reengineering

Shading Shading Shading Shading

• Today’s office buildings are designed for flexible use

• Rooms must adapt to tenants’ needs

Page 17 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

Flexible floor usage using room segmentation concept
with no need for rewiring or reengineering

Shading Shading Shading Shading

• Today’s office buildings are designed for flexible use

• Rooms must adapt to tenants’ needs

Page 18 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

Easy replacement of devices allows you to reduce maintenance
costs and ensures investment protection

Easy replacement

1
3 Remove defective device

2
2
Insert new device
(No ETS/service tool required)
1

3
Go back to normal operation

Page 19 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

Style, functionality and quality
A complete range of room units and sensors to satisfy all requirements

Full range of stylish room units, push-buttons, switches and sensors

Page 20 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

Long-term investment protection thanks to open standards

Open system architecture with no integration effort

BACnet in the room eliminates cumbersome integration into management station
and superordinate building automation and control system
Strong embedded cybersecurity with BACnet Secure Connect
Natively on device level

Investment protection through open field bus technology

Take advantage of latest network technologies

Remote access
Page 21 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023
Room Automation pays off for engineers

Effectiveness and efficiency

Efficient planning, engineering

and commissioning

Scalable, reliable and flexible portfolio Profitability

Meets requirements and conforms

to standards

Lower costs

Page 22 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

Comprehensive portfolio for all requirements
Configurable and programmable

Programmable

Configurable
Enhanced
room operation
• Standardized and proven applications
Efficient
• Easy-to-use tools for engineering
Lighting

engineering Shading Lighting

and commissioning
Light control
on DALI • Decentralized or centralized installation
Lighting
Scalable
• Green Leaf
and flexible
• Stylish room units and sensors

Emergency
lighting Easy engineering and replacement
Reduced cost
of communicative peripheral devices

Multiple rooms/ Meets require-

• Investment protection
distributed ments and con-
• Future-proof
functionality forms to
• Latest network technology
standards

Page 23 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

Desigo Room Automation options

Application HVAC Lighting/shading

• Proven application library
Advanced Programmable • Customer-specific adaptations
Room Automation • Tool: ABT Pro
• Compact and modular stations
• Enhanced functionality
• Touch room unit
• 3rd-party room units, scene control
• DALI, emergency lighting

• Configurable standard applications

Standard Configurable KNX PL-Link • Tool: ABT Site
Room Automation extensions • Compact stations DXR2
• I/Os
• HVAC applications on-board
• Lighting/shading on KNX PL-Link

Page 24 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

Desigo Room Automation reduces planning time

Typical market system Siemens solution

Shading

Shading

ON
OFF

Page 25 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

Shorter engineering and travel times thanks
to simple and fast remote access

Room 1
Room 2
Room 3 Room 1

Room 2

Gateway

Remote access
Room 3
• Web-based embedded tool on
all room automation stations
• Remote access via IP to
room automation stations

Read more on chapter “good to know”

Page 26 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

ABT Go makes commissioning simple

ABT Go is an intuitive
Commissioning made easy app for commissioning
• Intuitive app for standard mobile devices on Android or iOS and maintenance tasks
• Fast and intuitive point testing and diagnostics for BACnet/IP of Desigo Room
Desigo Room Automation, including reporting and photographs Automation devices on
BACnet/IP.
• Easy alarm handling to find and remove disturbances
• Adding/changing assignment of KNX PL-Link devices
• Significantly lower training effort (low entry point)

Page 27 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

ABT Go

Intuitive mobile app for commissioning and

maintenance tasks of devices used in building
automation and control systems
ABT Go is freely downloadable on any device • Fast and intuitive point testing
(Apple and Android) – a Windows Version for and diagnostics with history data
PC use is available, too. • Document defects with photos
• Fast overview of the system included in the reports
• No training needed • Reporting, scheduling and
• Easy user interface exporting functionality
to prove progress
• Easy alarm handling to find and
remove disturbances
Google Play Apple Store • Alarm suppression for PXC4
Automation stations to avoid
flooding the system with alarms
on startup or during
Please click on the individual icon to get commissioning
to the respective download

Page 28
ABT Go
Function: Online Trend
The online trend function is available on all
applications (Android, iOS and Windows) for
all automation stations: PXC4/5/7 E.M,
DXR2.E/M, DXR1.E/M, PXC3.E/M • With new “Online trend” view it
is far easier to read and interpret
the value changes on data point
during testing
• During data point testing on site,
it is quite often necessary to
have functional test for basic
data point test, e.g. to trend
room temp value changes, Fan
speed or other output changes
• To mark these data points as
“Passed” it takes many clicks.
“Online Trend” will help user to
achieve this in less clicks and
less back and forth between
data points
Page 29 Unrestricted | © Siemens 2023 | SI BP S MK I March 2023
Configurable controllers

Seite 30 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

Straight-through engineering workflow with ABT Site

• Configuration tool ABT Site is easy to learn

• Easy workflows
• Web-based Setup and Service Assistant (SSA) enables electrical installer to test his own work
• Thanks to PL-Link, extensive range of KNX devices can be used without ETS

Page 31 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

Configurable applications provide high level of flexibility

Peripheral configuration in ABT Site Steps

01 Select and configure application

02 Select and configure peripheral devices

03 Assign I/OS
Default Parameter settings in ABT Site

04 Deploy rooms

05 Mass-download configuration

Finish

Page 32 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

Desigo Room Automation reduces engineering effort and time

Thanks to ABT Site, it only

takes a few minutes to
Room 1 configure class A energy
efficiency applications.

Room 2

Room 3
Configurable room
automation stations

DXR2.x18 for central supply functions

Page 33 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

Central functions made easy
Reduced engineering and commissioning effort

DXR2.x18 for central weather station

Central functions do most
of the work to coordinate
Room 1 multiple rooms or to
interface rooms to
primary plant.

Room 2

Room 3
Configurable room
automation stations

DXR2.x18 for central supply functions

Page 34 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

Barcodes reduce commissioning effort

Room automation stations I can assign the devices

before or after installation,
depending on how
I instruct my installer.

After installing the device, remove Scan the barcodes into ABT Site Download the device configurations
the barcode label and place it on the to assign the devices to the respective to the correct automation stations
floor plan engineered room with a single click

Page 35 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

Plug & play peripherals can be added and commissioned without engineering

Plug & play on PL-Link

• Easy assignment during engineering,
like on-board I/Os
• Fast commissioning with on-board point-to-point test
• Toolless device replacement with auto assignment
Full range of sensors, operating devices and actuators,
including clever combinations
• Room operator unit, for flush or wall mounting,
with Green Leaf
• Temperature, humidity and indoor air quality (CO1)
sensors for flush or wall mounting
• Presence detector and brightness sensor
• Switches and push-button interface
• VAV compact controllers
• Actuators for lighting and shading

Page 36 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

Configurable Room Automation for HVAC,
lighting and shading reduces engineering effort dramatically

Compact room automation station

BACnet/IP
• BACnet/IP, daisy chain
• On-board room bus KNX PL-Link
• Trends and alarms
Configurable applications Room automation
• HVAC with on-board I/Os station DXR2.E.
• Optional lighting and shading with I/O modules on KNX PL-Link
• Central functions
Room bus KNX PL-Link with …
KNX PL-Link
• Room units featuring Green Leaf
• Push-buttons
• Sensors, presence detectors
• VAV controller

Lighting/blind VAV Sensor Room unit

actuators controller

Page 37 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

Overview
Configurable application on room automation station

BACnet/IP

Product no. (ASN) DXR2.E09-101A DXR2.E12P-102A DXR2.E18-101A DXR2.E18-102A DXR2.E10PL-102B DXR1.E04PDZ112

DXR2.E09T-101A DXR2.E12PX-102A DXR2.E10PLX-102B DXR1.E09PDZ112
DXR2.E10-101A DXR1.E09PDZ113
Room operation
Heated/chilled
ceiling/radiator
Fan coil unit
Variable Air Volume (VAV)

Central functions 1 1

Heat pump application

Dual Duct

1 Cannot be combined with other applications

Page 38 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

Overview
Compact room automation stations with BACnet/IP

BACnet/IP

Product no. (ASN) DXR2.E09.. DXR2.E09T.. DXR2.E10.. DXR2.E12P.. DXR2.E18.. DXR2.E10P.. DXR1.E10P..
BACnet/SC ready Yes Yes Yes Yes Yes No No
Housing Flat Flat Flat DIN DIN Flat via damper Flat via damper
Operating voltage AC 230 V AC 230 V AC 230 V AC 24 V AC 24 V AC 24 V AC 24 V
DI 1 1 1 1 2 1 1
UI 2 2 2 2 4 2 2
DO relay 3 1 3
DO triac 4 4 6 8 4 4
AO 0…10 V 3 1 2 4 1 1
Pressure sensor 1 1 1
Actuator 1 1

Page 39 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

Configurable Room Automation for HVAC,
lighting and shading reduces engineering effort dramatically

Compact room automation station

BACnet/IP
• BACnet MS/TP
• On-board room bus KNX PL-Link
• Trends and alarms Router PXC4/5/7
or PXG3..
Configurable applications
• HVAC with on-board I/Os
BACnet MS/TP Room automation
• Optional lighting and shading with I/O station DXR2.M.
modules on KNX PL-Link
• Central functions
Room bus KNX PL-Link with … KNX PL-Link
• Room units featuring Green Leaf
• Push-buttons
• Sensors, presence detectors
• VAV controller
Lighting/blind VAV Sensor Room unit
actuators controller

Page 40 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

Overview
Configurable application on room automation station

BACnet MS/TP

Product no. (ASN) DXR2.M09-101A DXR2.M12P-102A DXR2.M18-101A DXR2.M18-102A DXR2.M10PL-102B DXR1.M04PDZ112

DXR2.M09T-101A DXR2.M12PX-102A DXR2.M10PLX-102B DXR1.M09PDZ112
DXR2.M10-101A DXR1.M09PDZ113
DXR2.M11-101A
Room operation
Heated/chilled
ceiling/radiator
Fan coil unit
Variable Air Volume (VAV)

Central functions 1 1

Heat pump application

Dual Duct

1 Cannot be combined with other applications

Page 41 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

Overview
Compact room automation stations

BACnet MS/TP

Product no. (ASN) DXR2.M09.. DXR2.M09T.. DXR2.M10.. DXR2.M12P.. DXRM.E18.. DXR2.M10P.. DXR1.M09P..
Housing Flat Flat Flat DIN DIN DIN Flat via damper
Operating voltage AC 230 V AC 230 V AC 230 V AC 24 V AC 24 V AC 24 V AC 24 V
DI 1 1 1 1 1 2 1
UI 2 2 2 2 2 4 2
DO relay 3 1 3
DO triac 4 4 6 6 8 4
AO 0…10 V 3 1 2 2 4 1
Pressure sensor 1 1
Actuator 1

Page 42 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

Configurable Room Automation for HVAC,
lighting and shading reduces engineering effort dramatically

Compact room automation station

BACnet/IP
• P1 Protocol
• On-board room bus KNX PL-Link
• Trends and alarms Apogee PX
• Upgradeable to BACnet MS/TP
• Perfect for migration of P1 Apogee TECs
P1 Protocol Room automation
Configurable applications station DXR2.T.
• HVAC with on-board I/Os
• Optional lighting and shading with I/O
modules on KNX PL-Link KNX PL-Link
• Central functions
Room bus KNX PL-Link with …
• Room units featuring Green Leaf
• Push-buttons
• Sensors, presence detectors Lighting/blind VAV Sensor Room unit
• VAV controller actuators controller

Page 43 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

New P1 DXR Controller
Compact room automation station for migration of Apogee

P1 Protocol P1 Protocol

Product no. (ASN) DXR2.T12P DXR2.T18.. Product no. (ASN) DXR2.T12P DXR2.T18..
Room operation Housing DIN DIN
Heated/chilled ceiling/radiator Operating voltage AC 24 V AC 24 V
Fan coil unit DI 1 2
Variable Air Volume (VAV) UI 2 4
Central functions DO relay

Heat pump application DO triac 6 8

Dual Duct AO 0…10 V 2 4

Pressure sensor 1
Actuator

Page 44 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

Integrated damper actuator reduces effort and time both in factory and on site

Faster installation & cost saving

Due to reduced cabling, the device is easier and faster to install.
Part of a complete room automation solution
The new actuating DXR2 extends Siemens room automation portfolio.

Increasing occupant productivity with better indoor air quality while saving costs.

Page 45 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

Overview
Flush mount room operator units and sensors

ASN of front module QMX3.P36F/G AQR2532NNW AQR2533NNW AQR2530NNW AQR2532NNW AQR2535NNW AQR2535NNWQ
ASN of base module AQR2570.. AQR2570.. AQR2576N.. AQR2576N.. AQR2576N.. AQR2576N..
Green Leaf symbol
Indoor air quality indication
Display and
operation for HVAC
Temperature sensor
Indoor air quality sensor (CO2)
Humidity sensor (r.h.)
Analog input for passive
1 1 1 1 1 1
temperature sensor (NTC 10k)
Digital inputs 2 2 2 2 2 2

Page 46 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

Overview QMX3
Wall mount room operator units and sensors

Product no. (ASN) QMX3.P30 QMX3.P40 QMX3.P70 QMX3.P34 QMX3.P44 QMX3.P74 QMX3.P02 QMX3.P37 QMX3.P35H QMX3.P38H
Green Leaf symbol
Indoor air quality
indication
Display and
operation
for HVAC
Push-buttons
and LEDs for
lighting/shading
Temperature sensor
Indoor air quality
sensor (CO2)
Humidity sensor
(r.h.)

Page 47 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

Overview QMX2
Wall mount room operator units

Product no. (ASN) QMX2.P33 QMX2.P43

Green Leaf symbol
Indoor air quality indication
Display and operation for HVAC

Push-buttons and LEDs for lighting/shading

Temperature sensor
Indoor air quality sensor (CO2)
Humidity sensor (r.h.)

Page 48 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

Overview
Touch room operation

Single room operation Multi-room operation Technical operation

• Simple control of lights, blinds, HVAC • Floor plan to navigate • Alarming
• User interface based on standard or • Access to multiple rooms • Scheduling
highly customized templates • Alarming • Trending
• Scheduling • Plant graphics
• Trending • Generic operation

Page 49 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

Overview
Touch room operation

Product no. (ASN) PXM301 PXM40 PXM50

Screen size 7" 10" 15"
Green Leaf symbol 1

Display and operation for HVAC, lighting and shading 1

Single room operation 1

Multi-room operation
Technical operation
Power over Ethernet (PoE)
Wall mounting
Control cabinet mounting

1 PXM30 is suitable to only a limited extent for single room operation as there is no PoE available and wall mounting is not possible

Page 50 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

Overview
Room sensors with PL-Link (1/2)
Product No. (ASN) Description
AQR2532NNW + Front module for base modules, temperature (active)
AQR2570.. Base module PL-Link, analog input NTC10k, 2 digital inputs

AQR2533NNW + Front module for base module, humidity

AQR2570.. Base module PL-Link, analog input NTC10k, 2 digital inputs
AQR25…NNW/Q
AQR2530NNW + Front module for base module, without sensor
AQR2576N.. Base module, PL-Link, CO2, analog input NTC10k, 2 digital inputs

AQR2535NNW + Front module for base modules, humidity and temperature (active)
AQR2576N.. Base module, PL-Link, CO2, analog input NTC10k, 2 digital inputs

AQR2535NNWQ + Front module for base module, humidity and temperature, indication LED
AQR2576N.. Base module, PL-Link, CO2, analog input NTC10k, 2 digital inputs

QMX3.P30 Room sensor KNX for temperature, white

QMX3.P40 Room sensor KNX for temperature and humidity, white

QMX3.P30/40/70
QMX3.P70 Room sensor KNX for temperature, humidity, CO2, white

QMX3.P34 Room operator unit KNX with temperature sensor, segmented backlit display, touchkeys, white

QMX3.P44 Room operator unit KNX with sensors for temperature, humidity, segmented backlit display, touchkeys, white

Room operator unit KNX with sensors for temperature, humidity, CO2, segmented backlit display, touchkeys,
QMX3.P74
white
QMX3.P34/44/74
QMX3.P02 Room operator unit KNX with temperature sensor, configurable touchkeys, LED display, white

Page 51 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

Overview
Room sensors with PL-Link (2/2)

Product No. (ASN) Description

Room operator unit KNX with temperature sensor, configurable touchkeys, LED
QMX3.P02
display, white

Room operator unit KNX with temperature sensor, segmented backlit display,
QMX3.P37
configurable touchkeys, LED display, white QMX3.P02

Room operator unit KNX PL-Link with temperature sensor, Dot matrix backlit
QMX3.P35H
display, touchscreen, white

Room operator unit KNX PL-Link with temperature sensor, Dot matrix backlit QMX3.P37
QMX3.P38H-BSC
display, touchscreen, Lighting/Blinds, black

QMX3.P36F/G Flush-mounted room unit

QMX2.P33 Room Unit for Use with DXR Controller, Temperature Sensing QMX3.P35/38H-BSC

QMX2.P43 Room Unit for Use with DXR Controller, Temperature + Humidity Sensing

QMX3.P36F/G

QMX2.P33/43

Page 52 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

Overview
Motion and light sensors

Product No. (ASN) Description

UP 255D21 Brightness sensor

UP 258D12 Presence detector with brightness sensor

Presence Detector WIDE

UP 258D31
with temperature measurement
Presence Detector WIDE pro
UP 258D41 with temperature and relative humidity
measurement
Presence Detector WIDE multi
UP 258D51 with temperature, humidity and CO2
measurement

Presence Detector WIDE DualTech

UP 258D61
with temperature measurement

Page 53 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

Overview
Damper and valve actuators with KNX PL-Link

Product No. (ASN) Description

GDB181.1E/KN VAV compact controller AC 24 V, 5 Nm / 10 Nm,

GLB181.1E/KN 150 s, 300 Pa
GDB111.9E/KN Electromotoric rotary actuator KNX for 2/3-port
GLB111.9E/KN control ball valves up to DN20 / DN50

GDB111.1E/KN New Rotary air damper actuators 5 Nm / 10 Nm,

GLB111.1E/KN without spring return
New Electromotoric actuator for radiator valves, PICV
SSA118.09HKN
and small valves

DXR2 is also available as a version with

integrated 10 Nm damper actuator

Page 54 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

Overview
Push-buttons with KNX PL-Link

Product
Description
No. (ASN)
JB 260C23 Binary input 4 x AC/DC 12...230 V

RL 260/23 Binary input, 4 x AC/DC 12...230 V

UP 220D31 Push-button interface, 4 x inputs, LED control output

UP 221.. Push-button, single, DELTA i-system

UP 220D31 UP 28.. RL 260/23
UP 222.. Push-button, double, DELTA i-system

UP 223.. Push-button, triple, DELTA i-system

UP 285.. Push-button, single, DELTA style

UP 286.. Push-button, double, DELTA style

UP 287.. Push-button, triple, DELTA style

UP 22.. JB 260C23

Page 55 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

Overview
Lighting actuator modules with KNX PL-Link

Product No.
Description
(ASN)
RL 512/23 Switching actuator, 1 x AC 230 V, 16 AX, (C-load)
RS 510/23 Binary output, 2 x AC 230 V, 10 A (R-load)
UP 510/03 Binary output, 2 x AC 230 V, 10 A, with mounting frame and BTI interface
UP 510/13 Binary output, 2 x AC 230 V, 10 A RL.. RS..
RL 513D23 Binary output, 3 x 6 A, AC 230 V

UP 525/03 Universal dimmer, 1 x AC 230 V, 10 ...250 VA, with mounting frame and BTI interface
UP 525/13 Universal dimmer, 1 x AC 230 V, 10...250 VA
RS 525/23 Universal dimmer, 1 x AC 230 V, 10...250 VA, (R-, L-, C-load)
N 528D01
Universal dimmer, 2 x 300 VA, AC 230 V
N 528C01 UP5../13
UP5../03
N 554D31 Universal dimmer, 4 x 300 VA / 1x 1000 VA, AC 230 V
N 525D11 Switch/dimming actuator 2x DALI Broadcast
RL 526D23 Switch/dim actuator 2 x AC 230 V, 6 A, 1…10 V
N 536D31 Switch/dim actuator, 4 x AC 230 V,10 AX, 1…10 V
N 536D51 Switch/dim actuator, 8 x AC 230 V,10 AX, 1…10 V
N 543D31 Solar protection actuator, 4 x AC 230 V, 6 A, with end position detection
N 543D51 Solar protection actuator, 8 x AC 230 V, 6 A, with end position detection N 543
N..

Page 56 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

Overview
Switching actuator modules with KNX PL-Link

Product
Description
No. (ASN)
N 530D31 Switching actuator 4 x AC 230 V, 6 AX, (C-load)

N 530D51 Switching actuator 8 x AC 230 V, 6 AX, (C-load)

N 530D61 Switching actuator 12 x AC 230 V, 6 AX, (C-load)

N 532D31 Switching actuator 4 x AC 230 V, 10 AX, (C-load)

N 532D51 Switching actuator 8 x AC 230 V, 10 AX, (C-load)

N 532D61 Switching actuator 12 x AC 230 V, 10 AX, (C-load)

N 534D31 Switching actuator 4 x AC 230 V, 16/20 AX, (C-load)

N 534D51 Switching actuator 8 x AC 230 V, 16/20 AX, C(C-load)

N 534D61 Switching actuator 12 x AC 230 V, 16/20 AX, (C-load)

N 53..

Page 57 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

Overview
Lighting and shading actuator modules with KNX PL-Link

Product No. (ASN) Description

JB 512C23 Switching actuator, 1 x AC 120...277 V, 20 A or 1 x AC 347 V, 15 AX (C-load)
JB 510C23 Binary output, 2 x AC 120...277 V, 10 A (R-load)
JB 513C23 Binary output, 3 x 10 A, AC 120...277 V

JB 525C23 Universal dimmer‚ 1 x AC 120 V, 10...125 VA (R-‚ L-‚ C-load)

JB 526C23 Switch-/dimming actuator, 2 x AC 277 V, 20 A, 1...10 V
JB 527C23 Switch-/dimming actuator, 1 x AC 277 V, 20 A, 1...10 V

JB 520C23 Shutter blind actuator, 1 x AC 120 V, 6 A

JB products
JB 521C23 Shutter blind actuator, 2 x AC 120 V, 6 A

JB 125C33 Power supply, 160 mA, AC 277 V

Page 58 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

Overview
KNX PL-Link accessories

Product
No. Description
(ASN)
AP 118/01 Control module box

AP 641/01 Room control box

AP 118
JB 125C33 Power supply, 160 mA, AC 277 V, UL/NEMA

N 125/02 Power supply unit DC 29 V, 160 mA with additional unchoked output

N 125/12 Power supply unit DC 29 V, 320 mA with additional unchoked output

N 125/22 Power supply unit DC 29 V, 640 mA with additional unchoked output

RL 125/23 Decentralized power supply, 80 mA, AC 230 V

AP 641

N 125/.. RL 125/23 JB 125C33

Page 59 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

Programmable
controllers

Seite 60 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

The right tool for each task that allows open programming

ABT Site ABT Site & ABT Pro

Configurable Room Automation Programmable Room Automation

Covers most applications found in the field Configuration of extra functions

3rd-party
>4 >2 S-Mode
Lightning Shading

Lightning

Application library with even more functions

Shading

Adapting/programming applications

HVAC
Ventilation Cooling

Page 61 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

Topology

Programmable Configurable and

BACnet/IP programmable

Room automation
Room automation station DXR2.E..
station PXC3.E7..

I/O modules TXM1.. DALI gateway Room operator

PXC3.E16A unit QMX3
Brightness/

KNX PL-Link
presence sensors

Sensor
KNX PL-Link AQR25..

Lighting/shading
Emergency actuators
lighting

VAV I/O box Room Multi-sensor Sensor Lighting/ 3rd-party

controller RXM.. operator UP258 AQR25.. shading S-Mode 3rd-party
GDB/GLB unit QMX3 actuators device S-Mode devices

Page 62 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

Overview
Modular room automation station PXC3.E..

Product no. Typical functionality KNX PL-Link Data points on DALI-2 Total number
(ASN) TX I/O modules of data points1
Lighting application Max. 64 ballasts
PXC3.E16A-200A – – 90
(DALI-2 / BACnet gateway) and max. 63 input devices
4 rooms/
PXC3.E72-100A 64 devices 72 – 140
8 room segments
4 rooms/ Max. 64 ballasts
PXC3.E72A-200A 64 devices 72 140
8 room segments and max. 63 input devices
8 rooms/
PXC3.E75-100A 64 devices 200 – 280
16 room segments
8 rooms/ Max. 64 ballasts
PXC3.E75A-200A 64 devices 200 280
16 room segments and max. 63 input devices

1 Total number of data points on TX I/O modules, KNX PL-Link, and DALI

Page 63 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

PXC3 with DALI-2
Standard and Certification

PXC3 comply to DALI-2

specifications
• Avoids troubles during commissioning
• Ensure interoperability to other certified devices PXC3.E..A-200A
• Investment protection

Page 64 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

All power supplies on-board
Modular room automation station PXC3.E..

KNX PL-Link: 160 mA

Typically, 10..20 devices
external power supply possible

TX island bus: 600 mA

Typically, 10 TX I/O modules
parallel switchable
with supply modules
DALI-2: 230 mA
Maximum allowable current,
according to DALI standard

Page 65 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

I/O-Modul TXM1.

Product no. Type Number Digital Analog

Analog output Triac output Relay output
(ASN) of module of I/O I/O input
TXM1.8D
Digital input 8/16
TXM1.16D
DC 0…10 V
Temperature sensor
TXM1.8U Universal 8 DC 0…10 V
(Ni1000, Pt1000),
resistance measuring
AC 24 V/1 A
TXM1.8T Triac 8 NC/NO,
PWM, 3-pos triac
AC 230 V/3 A
TXM1.6R Relay 6
NC/NO
AC 230 V/10 A
TXM1.6RL Relay light 6
NC/NO
AC 100…250 V/3 A
TXM1.8RB Relay blinds 8
current measurement

NC = normally closed, NO = normally open, PWM = pulse width modulation

Page 66 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

Programmable Room Automation
Brightness and presence sensors

BACnet/IP BACnet/IP

PXC3 PXC3

DALI KNX PL-Link DALI

• Luminaires on DALI
Luminaires and brightness/presence sensors on DALI
• Brightness/presence sensors on KNX PL-Link

Two bus systems in the ceiling Only one bus system in the ceiling

Page 67 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

Programmable Room Automation
DALI lighting controller PXC3.E16A

BACnet/IP BACnet/IP

PXC3.E16A PXC3.E7..A DXR2.E..

PXC3.E16A
Room units incl.
push-buttons for light
DALI KNX PL-Link
DALI

• Central lighting installation • Decentralized HVAC installation

• With multiple DALI lines • One lighting controller for multiple rooms
• Push-buttons and/or sensors on KNX PL-Link or • Lights are operated via push-buttons connected via KNX PL-Link
TX I/O modules (DXR2.E..)
• Brightness/presence sensors on DALI can be used
for HVAC, lighting, and shading

Page 68 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

Programmable Room Automation
DALI emergency lighting

Functionality
1. Tests started via schedule Desigo CC
• Functional test
• Short duration test
• Duration test PXC3.E..A

2. Alarming if test failed

3. Generate test reports Emergency
lighting
4. Store-and-print test reports
Decentralized
Emergency lighting is part of one system DALI EML and batteries
with all other disciplines
• Same management station for EML, lighting, shading,
HVAC  easier to operate Antipanic light
• Share network and infrastructure with
Room Automation  lower cost

Standard DALI gear

Page 69 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

Programmierbare Raumautomation
Spezielle Merkmale und Funktionen

• Individual screen set up of flush mount room unit QMX3.P36

Enhanced room operation • Scenes

• Room automation station PXC3.E7..A with DALI-2 on-board

Light control on DALI-2 • Extension with DALI-2 gateway PXC3.E16A

• Safety lighting with periodic battery tests for antipanic light, es-
Emergency lighting cape route lighting and emergency lighting for high-risk spaces
• Generation of automatic test reports

Multiple rooms/distributed • Multiple rooms on the same room automation stations

functionality • Functionality distributed on multiple room automation stations

Integration of 3rd-party room units with KNX

3rd-party room units on KNX (engineered with ETS)

Page 70 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

Good to know

Seite 71 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

Desigo V6.2 Update

Dual Duct Application

• Cool air duct, Hot air duct with configurable
ventilation delivery
• Dual Duct, dedicated ventilation duct
with hot water or electric heating coils
• Dual Duct with constant volume option

P1 DXR
• Allows you to swap out a failed legacy Apogee TEC
controllers and replace it with our newest hardware
that supports the old proprietary P1 protocol
• Invest in hardware once, as P1 DXR firmware can
be upgraded to a standard BACnet MS/TP DXR

Page 72 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

Operational certificates

Unrestrictedity Integrity Authentication

Communication with embedded web Communication with embedded web The client can be sure to communicate
server is encrypted server cannot be altered with the correct embedded web server

• Desigo Room Automation (DXR2, PXC3)

• Certificates are automatically handled by ABT Site

Page 73 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

Desigo Room Automation is supported by all important
standards communication protocols

Extension of building/campuses
Use latest generation of devices from any supplier
retrofit rooms/building

Desigo Room Automation can be integrated

Existing management station
into any BACnet management station

Selections of stylish room units

Room units from 3rd parties can be integrated
into Desigo Room Automation IP
Other suppliers are able to deliver devices
Supplier out of business
and maintain system

Remote access for operation and monitoring,

Outsourcing/decentralized working services and access to data (load configurations/programs,
diagnostic information)

Page 74 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

Additional benefits with BACnet/IP

• Based on the latest technology

• Ethernet cabling is the standard for in-building communications
Future-proof • Strong embedded cybersecurity with BACnet Secure Connect
natively on device level IP
• Load standardized applications from the library
Application flexibility • Applications can be adapted and downloaded quickly
HVAC Lighting Shading
• Trends on room automation stations

• No BACnet routers to be configured

Engineering efficiency • Remote access (download, embedded web-based tool)
• Fast download via network (firmware, applications)

• Combine compact and modular room automation stations

DALI lighting • DALI lighting with PXC3.E..A Lighting

Integration of 3rd-party room units with KNX

Advanced room operation (engineered with ETS)

Page 75 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

Ethernet topologies for all needs

Star Most reliable  Star topology

• Standard for corporate networks
• More switches
Most economic  Daisy chain topology
• Smaller number of switches
• Lower reliability
Best value  Ring topology
• Smaller number of switches
• Reliable

Daisy Chain Ring

Switch with RSTP (rapid spanning tree protocol)
Up to 20 DXR2.E..

Up to 20 DXR2.E..

Page 76 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

Scalance network infrastructure products

Scalance XB-000 range Scalance XB-200 range Scalance XM-400 range

• Unmanaged layer, 2 switches • Managed layer, 2 switches • Managed layer, 3 switches
• AC/DC 24 V power supply • RSTP for ring topology • Router functionality
• Main use at edge and • Virtual networks (VLAN) • Main use at core level
distribution level • Main use at distribution level

For support and pricing, please contact your local PD PA CI Sales

Page 77 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

Master BACnet with basic knowledge

Network size

BACnet and IT expert

IP experience knowledge
Real world
guidelines
on IP networks
250 in BAC
devices

Basic IP
eLearning
network knowledge experience

Network usage
Dedicated network Shared network
for Room Automation with fire, security, office

Page 78 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023

Key takeaways
Combine configurable and programmable

Standard rooms
Room Lighting/shading
 Configurable  ABT Site
automation actuators
station DXR2..

Room operator KNX PL-Link

unit QMX3

“Special” Rooms
 Programmable  ABT Pro

Room automation station PXC3.E.. with I/O modules

3rd Room
party
automation
station DXR2..
3rd-party KNX PL-Link
devices

Page 79 Unrestricted | © Siemens 2023 | SI BP S MK | December 2023