:~
~r;-.'
.:Form;10001 (3/88)
SELECTION OF STRAINERS AND
rlA/rt-
DESitN SPECIFICATION
~
>- 'IK~1 STRAINER SCREENS
(Hetric) ( H25-1D-9OH
• DATE: DEC 1990
1. GENERAL
1.1 Scope
PAGE 1 OF 6
This Specification defines the Kellogg requirements for the selection of permanent strainers and
strainer screen materials suitable for various process liquids and gases encountered in a process
plant.
Section 2 lists the strainer types recommended for various services. Section 3 provides a brief
description of strainer types listed in Section 2. Strainer body, screen materials and screen
perforations recommended for all strainer types and various process mediums are listed in Section 4.
2. SELECTION OF THE STRAINER TYPES
STRAIIER
SBMCE PIPE SIZES
Description
Liquid' Gas or Vapor NPS 2 and below Y-Strainer
Air - Bleed Weld neck flange Sizes NPS 2 thru 24 Tee Strainer
Classes 160, 300 , 600 RF and RJ
Sizes NPS 6 thru 12 Classes Welded Cone Strainer
160 thru 2500, Flanges RF and RJ with flanged spool piece
lith flanged spoo I piece aeeess - Type A
Air - Process at Sizes NPS 6 thru 10 Classes Welded Cone Strainer
•
Centrifuga I Co.pressor 150 thru 2500, Flanges RF and RJ with flanged tee outlet
Suction lith flanged tee outlet for access. - Type B
Sizes NPS 14 Ind larger Welded Cone Strainer
Classes 160 thru 2500, Flanges RF with flanged 10 NPS nozzle
-- and RJ with NPS 11 outlet nozzle - Type C
Air ~ Process at Sizes NPS 2 thru 24 Classes 150 :In-line Strainer
Reciprocating thru 2500, Flanges RF and RJ
Co.pressor Suction
Fuel - Oi I All sizes Duplex Strainer
Sizes NPS 6 thru 12 Classes Welded Cone Strainer
150 thru 2500, Flanges RF and RJ with flanged spool piece
with flanged spool piece access - Type A
Gas - Process !It Sizes NPS 8 thru 10 Classes Welded Cone Strainer
Centrifugal Co.pressor 160 thru 2500, Flanges RF andRJ with flanged tee outlet
Suction with flanged tee outlet for access - Type B
Sizes NPS 14 and larger Welded Cone Strainer
Classes 160 thru 2500, Flanges RF with flanged 10 NPS nozzle
Ind RJ with NPS 11 outlet nozzle - Type C
Gas - Process at Sizes NPS 2 thru 24 Classes 150 In-l ine stra iner
Reciprocating thru 2500, Flanges RF and RJ
Co.pressor Suction
Gas - Bleed Weld neck flange Sizes NPS 2 thru 24 Tee Strainer
CIasses ISO, 300 , 800 RF and RJ
, Weld neck fllnge, Sizes NPS 2 thru 24 Tee Strainer
Gas - Process Classes lSD, 300 , 600 RF and RJ
•
Liquid (Non~orrosiYe) All sizes Large Area Strainer
Liquid - Process Weld neck flange Sizes NPS 2 thru 24 Tee Strainer
) Classes lSD, 300 l 800 RF and RJ
- /
Stea. Weld neck flange Sizes NPS 2 thru 24 Tee Strainer
FJUNC
CCIlE:
CIasses 150, 300 l 800 RF and RJ
\IlL: I
SB:: 1
Q..: M
rr51S I~~ Jv! JI f1-
Form ,10002 '3/88)
) DESIGN SPECIFICATION SELECTION OF STRAINERS AND
M25-1D-901t
STRAINER SCREENS
(Metric) IK~I
• PAGE 2 OF 6
SBMCE PIPEsms
STRAIIB
Description
DATE: DEC 1990
Slurry All sizes Dup lex Stra i ner
later - Bo i Jer Feed All sizes Duplex Strainer
liter - De.inera I ized leld neck flange Sizes NPS 2 thru 24 Tee Strainer
Classes 160, 300 1 SOD RF Ind RJ
liter - Gland Cooling leld neck flange Sizes NPS 2 thru 24 Tee Strainer
Classes 160, 300 1 SOD RFlnd RJ
later - Supply Mains All sizes Duplex Strainer
Fresh or Silt
Water - at PU.p Suction leld neck fllnge Sizes NPS 2 thru 24 Tee Stra iner
and Supply Mains Cllsses 150, 300 1 SOD RF Ind RJ
Fresh or Sa It
3. TYPES OF STRAINERS
o'!--~~ 3.1 Y-Strainer
'J:'"_-_ ~ _:.""V"" Sizes NPS 1/2 thru 2. Classes 600, 1500 and
• y-Strainer
,r ' _-,... ,
-,
2500
, I
.--
f----~- - 3.2 Tee Strainer
Strainer consists of strainer baskets
installed in a piping tee with a weld neck
, flange. Sizes NPS 2 thru 24, Classes 150,
I
l~~ ..
-..l 300, and 600, and Flanges RF and RJ
Tee Strainer
_.r~a _
-. ---- 3.3 In - Line Strainer
Consists of a truncated conical In - Line
-7, ,,-- --- Strainer basket. Sizes NPS 2 thru 24,
l.I U Classes 150 thru 2500, and Flanges RFand RJ
• In - Line Strainer
,
1
Form 10001 (3188)
SELECTION OF STRAINERS AND DESIGN SPECInCATION
STRAINER SCREEIIS
(Metric) 'M25-1D-9OM
• DATE: DEC 1990 PAGE 3 OF 6
3.4 Welded Cone Stra;ner - Type A
Welded cone strainer is a conical strainer
basket welded inside the piping. Pipe sizes
NPS 6 thru 12, Classes 150 thru 2500, and :
Flanges RF and RJ. Access for cleaning the
strainer is a flanged spool piece.
Welded Cone Strainer - Type A
3.5 Welded Cone Stra;ner - Type B
--
~
c.- - - Similar to Type A Welded Cone Strainers
except for pipe sizes and access types.
Pipe sizes NPS 6 thru 10, and Classes 150
thru 2500. Access for cleaning the strainer
is through a flanged tee outlet. .
Welded Cone Strainer - Type B
--
~
-- -
• . .I
".,
3.6 Welded Cone Strainer - Type C
Similar to Type A Welded Cone Strainers except
for pipe sizes and access types. Pipe sizes
NPS 14 and larger, and Classes 150 thru 2500.
Access for cleaning the strainer is through
an NPS 10 reinforced flanged nozzle.
Welded Cone Strainer - Type C
3.7 large Area Strainer
Recommended for non-corrosive fluids.
large Area Strainer
m 3.8 Duplex Stra;ner
Recommended for services requiring frequent
cleaning without flow interruption.
• Duplex Strainer
fonn10002 C3I88l
~ DESIGN SPECIFICATION SELECTION OF STRAINERS AND
•
T
STRAINER SCREENS ,, KELLOGG
M25-1D-9OM (Metric) . W.
• PAGE 4 OF 6
4. MATERIAL SELECTION (Notes located at end of Section)
4.1 Y-Strainers
DATE: DEC 1990
PROCESS MEDIUM STRAINER BODY SCREEN MATERIAL SCREEN PERFORATIONS
Gas or Vapor Carbon Steel or Monel (8500 F max)
.
0.11 mm dia. wire with 0.14 mm
Stainless Steel or AISI Type 304 opening (100 Hesh)
Liqutd Carbon Steel or Monel (4000 F max) 0.38 mm dia. wire with
Stainless Steel or AISI Type 304 0.89 mm opening (20 Mesh)
4.2 Tee Strainers
PROCESS MEDIUM PIPE LINE MATERIAL SCREEN MATERIAL SCREEN PERFORATIONS
Carbon Steel, 1. NPS 2 to 6: 0.71 mm dia.
1/2 to 6 Cr Mo, AISI Type 304 wire with 2.5 mm opening
Process' Gas or Liquid and AISI Type 304 (8 Mesh)
•
2. NPS 8 and larger: 1.6 mm
dia. wire with 4.75 mm
AISI Type 316 AISI Type 316 opening (4 Mesh)
Steam Carbon and Ferritic
. Alloy Steel
AISI Type 304 0.56 mm dia. wire with
Bleed Air or Gas 2 mm opening (12 Mesh)
Carbon Steel
Water for Gland Cooling
Fresh Water at Pump Carbon Steel AISI Type 304 1. NPS 2 to 6: 1.6 mm dia.
Suction and Supply wire with 4.75 mm opening
Hains (4 Mesh )
2. NPS 8 to 12: 1.4 mm dia.
wire with 7.1 mm opening
Salt Water at Pump Carbon Steel Monel (3 Mesh)
Suction and Supply 3. NPS 14 &larger: 2.24 mm
Hains dia. wire with 9.5 mm by
9.5 mm opening
AISI Type 304 AISI Type 304 1. NPS 2 to 6: 1.6 mm dia.
wire with 4.75 mmopening
(4 Mesh)
2. NPS 8 to 12: 1.4 mm dia
Demineralized Water with 7.1 mm opening
AISI Type 316 AISI Type 316 (3 Mesh)
3. NPS 14 &larger: 2.24 mm
dia. wire with 9.5 mm by
9.5 mm opening
•
.'
\ I
./
Form ~OOO1 (3188)
.. f
... SELECTION OF STRAINERS AND DESIGN SPECIFICATION !
·IKWaI STRAINER SCREENS
(Metric) , tt2S-1D-9OM
• DATE: DEC 1990
4.4 In-Line Strainers
PROCESS MEDIUM PIPE LINE MATERIAL SCREEN MATERIAL
PAGE S OF
SCREEN PERFORATIONS
6
Carbon Steel, AISI Type 304
1/2 to 6 c- Mo, (Note 3) 2 mm thick sheet with
Process Gas, or Air at 3.17 mm dia. perforations
Reci procating on 4.76 mm centers with an
Compressor Suction AI SI Type 304 AISI Type 304 inside screen having 0.11 mm
(Note 4) dia. wire with 0.14 mm opening
(100 Mesh)
AISI Type 304 AISI Type 316
(Note 4)
4.5 Welded Cone Strainers - Type A. B and C
PROCESS MEDIUM PIPE LINE MATERIAL SCREEN MATERIAL SCREEN PERFORATIONS
Carbon Steel,
1/2 to 6 Cr Mo, AISI Type 304
and AISI Type 304
Process Gas, or Air at 4.75 mm thick plate
Centrifugal Compressor 9.5 mm dia. perforations
Suction on 14.25 mm centers
•
AISI Type 316 AISI Type 316
4.7 Large Area Strainers
PROCESS MEDIUM STRAINER BODY SCREEN MATERIAL SCREEN PERFORATIONS
Non-Corrosive Fluids Carbon Steel AISI Type 304 3.35 mmby 3.35 mm opening
Slurry .using 2.24 mm dia. wire or
3.17 mm dia. perforated plate
4.8 Duplex Strainers (Note 5)
PROCESS MEDIUM STRAINER BODY SCREEN MATERIAL SCREEN PERFORATIONS
Fuel Oil and Fuel Gas Carbon Steel AISI Type 304 1.18 mm dia. perforations
at 2.02 mm centers
Water Fresh Cast Iron Brass 1. 6 NPS and smaller - 4.75 mm
Supply Bronze at 7. q mm centers
Mains 2. 8 to 12 NPS - 6.35 mm dia.
Salt Cast Iron Honel at 9.52 mm centers
•
Boiler Feed Cast Iron Honel (400 OF Hax)
4.75 mm dia. at 7.9 mm centers
Carbon Steel AISI Type 304
Fonn 1llOO2 f3lB8l
• DESIGN SPECIFICATION
M25-10-9OM
SELEOION OF STRAINERS AND
STRAINER SCREENS
(Metric) 1+1
• PAGE 6 OF 6
Notes to section 4. :
DATE: DEC 1990
1. Whenever AISI Type 304 is listed for use as scretn material, AISI Types 316, 321, or 347 may be
used instead.
2. Mesh indicated is square mesh.
3. Strainer plate ring shall be carbon steel.
4. Strainer plate ring uteria1 shall be the same as the screen material.
5. Duplex strainers uy also be used for services other than those listed when frequent cleaning
without flow interruption is necessary•
• \
j
