Scribd
Upload
96 views

Imaster NCE Installation Guidemain-Content

Uploaded by

arafat
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
96 views

Imaster NCE Installation Guidemain-Content

Uploaded by

arafat
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

iMaster NCE-Campus Factory Preinstallation Operation Guide (Minimum Cluster)

The following uses a two-plane minimum cluster of iMaster NCE-Campus running V300R022C00 as an example. For the detailed preinstallation opera-
tion guides in other scenarios, see "iMaster NCE-Campus Installation (Preinstallation, 2288X V5/RS221G1 Server, Minimum Cluster)" and "iMaster
NCE-Campus Installation (Preinstallation, 2288X V5/RS221G1 Server, Single-Node System)" in the product documentation of the corresponding version
Note: at https://support.huawei.com/enterprise/en/network-management-control-analysis/imaster-nce-campus-pid-250852420.

Commissioning Preparations

IP Address Plan

Factory preinstallation mode(minimum cluster)

Default IP addresses Planned IP addresses


Northbound floating IP address: Northbound floating IP address:
192.168.2.28/24 172.16.2.8/24
Southbound floating IP address: Southbound floating IP address:
Preset passwords Planned passwords
192.168.2.24/24 172.16.2.9/24
Floating IP address of the management Floating IP address of the management root：Change****** root******
plane: 192.168.2.23/24 plane: 172.16.2.10/24 sopuser：Change****** sopuser******
Internal floating IP addresses (bond0): Internal floating IP addresses (bond0): … …
192.168.1.20 172.16.1.5
192.168.1.21 172.16.1.6
Internal floating IP addresses (bond1): Internal floating IP addresses (bond1):
192.168.2.22 172.16.2.11
192.168.2.21 172.16.2.12

172.16.1.2/24 172.16.2.5/24 172.16.1.3/24 172.16.2.6/24 172.16.1.4/24 172.16.2.7/24

192.168.1.16/24 192.168.2.16/24 192.168.1.17/24 192.168.2.17/24 192.168.1.18/24 192.168.2.16/24

bond0 bond1 bond0 bond1 bond0 bond1

产品

OS OS OS
Server 1 Server 2 Server 3

Note: You can obtain the preset password either from the physical label of a server, or by referring to the document at https://support.huawei.com/enterprise/en/doc/EDOC1100181950.

Server Connection

Bond0 default address: 192.168.1.17/24 Bond0 default address: 192.168.1.18/24


Bond0 default address: 192.168.1.16/24 Planned address: 172.16.1.3/24 Planned address: 172.16.1.4/24
Planned address: 172.16.1.2/24
Bond1 default address: 192.168.2.17/24
Planned address: 172.16.2.6/24 Bond1 default address: 192.168.2.18/24
Bond1 default address: 192.168.2.16/24 Planned address: 172.16.2.7/24
Gateway: 172.16.2.1
Planned address: 172.16.2.5/24 Gateway: 172.16.2.1
Gateway: 172.16.2.1
Two IP addresses:
172.16.2.50/24
192.168.1.50/24

During the commissioning, add all the Ethernet ports on the server to the same VLAN. After the commissioning, add them to different VLANs based on
Note: the planes where they reside.

Logging In to EasySuite

Configure the IP address of a local PC.


Choose Network & Internet Settings > Status > Network and Sharing
Center > Change adapter settings, double-click the NIC to be configured
and click Properties. In the dialog box that is displayed, select Internet pro-
tocol version 4 (TCP/IPv4) and click Properties. In the dialog box that is
displayed, configure the IP address, subnet mask, and default gateway, and
then click Advanced. On the IP Settings tab page of the Advanced TCP/IP
Settings dialog box, click Add in the IP addresses area. In the dialog box that
is displayed, configure the IP address and subnet mask, and click Add. Click
OK, and then OK one more time to complete the IP address configuration.

Download software packages (https://support.huawei.com/enterprise/en/network-management-control-analysis/imaster-nce-campus-pid-250852420/software/259529711)

Decompress the required software package

Commissioning

Start EasySuite

Set parameters.

Set Node Number to Minimum Cluster 3 nodes. Set other parameters based
Note: on site requirements, and in this example, the default settings are used.

Start commissioning

After the environment check is complete, click Start commissioning. You can view and export the commissioning report after the
commissioning task is complete.

Log in to EasySuite again when you are logged out due to timeout. The ongoing commissioning task is not affected and you can view the
Note: task in Project Management.

Checking After Commissioning

Log in to the management plane at https://172.16.2.10:18102, and check the service status on the home page. If 0 is displayed for Services,
the controller is running properly.

Log in to the service plane at https://172.16.2.8:18008 to configure the license mode and other functions on the service plane.

You might also like