INTELLIGENT

TEMPERATURE
SENSORS
TURCK – THE FIRST ADDRESS FOR
INDUSTRIAL AUTOMATION

TURCK is one of the leading global The TURCK group was founded in 1965. TURCK products guarantee the efficiency
company groups in the field of industrial Today it has more than 2500 employees and cost effectiveness of industrial
automation. The company has consist- in Germany as well as in subsidiaries systems world-wide through well-directed
ently utilized its origins as a pioneer and located in 25 countries. Exclusive application engineering and effective
trendsetter in the field of sensor tech- representatives in further 60 countries consultation with competent employees.
nology and has continuously developed also support world-wide sales and
new, holistic solutions for the most varied service. The main focus of the activities TURCK utilizes the opportunities posed
of automation tasks. TURCK today concentrates on the optimization of by globalization. With its manufacturing
provides a unique product range for the manufacturing processes. Close facilites in Germany, Switzerland, the USA
entire field of industrial automation as a cooperation with the customers is Mexico and China, TURCK is able to
full-range supplier for IP67 components, decisive for the success of the company. adapt world-wide and at any time to the
which range from the I/O levels and conditions which are prevalent on the
extend to the interface and to the control. local markets.

System partner with a guarantee

for the future

The TURCK philosophy is just as simple

as it is sophisticated: this fact with continuous development of
We always want to provide the very best innovative products and solutions, from
for our customers – quickly, flexibly and which our customers and partners will
reliably! We apply this principle on a daily continue to benefit from in the future.
basis to guarantee the efficiency, quality
and safety of industrial systems world-
wide.
We do not rest on our laurels and prove

2 /01
/0110
10 Han
ns T
Hans urck G
urc
Turck mbH & Co.
GmbH C KG • 4547
Co.KG 4 5472
454722 Mülh
M ülh
heim
eim/Ru
/Ruhr
Mülheim/Ruhrh •G ermany • Tel. 0208 4952-0 • Fax 0208 4952-264• E-Mail: more@
Germany re@tur
turck
ck.com • www.turck.com
[email protected]
THE PERFECT SOLUTION FOR
YOUR APPLICATION

The detection of temperature is one of the

most important tasks in the processing
and manufacturing industries. Very
important criteria are also factors such as
accuracy or repeatability, the interfaces to
the process and to the operator. The
temperature sensor series TS-400 and
TS-500 made by TURCK set new
standards in this area.

Highest levels of operating comfort

In addition to the two buttons for quick
menu scrolling, the TS-series also
provides a recessed button for saving
changed and modified values.

Highest levels of flexibility with

mounting
A rotating sensor body with a tilted
display which can be rotated by 180°
using software, provides all the installa-
tion options.

Highest levels of precision

0.2 K with the temperature sensor
enables a very large spectrum of applica-
tions with just a few variants.

Highest levels of system reliability

The robust design with a stainless steel
housing and the high level of EMC
immunity and degree of protection IP67
assure the highest levels of operational
safety.

TS-500
TS-400

Error free operation

The Enter button has been recessed in

order to avoid unintentional modifica-
tion of the data stored in the sensor.
The button can only be pressed using
a pointed object (e.g. a ballpoint pen).

Hans Turck GmbH & Co.KG • 45472 Mülheim/Ruhr • Germany • Tel. 0208 4952-0 • Fax 0208 4952-264• E-Mail: [email protected] • www.turck.com 3 /0110
A MATCH FOR THE HIGHEST OPERATIONAL
SAFETY DEMANDS

The new temperature sensors of the

TS-400/-500 provide an excellent level
of operational safety, even in harsh
manufacturing environments due to their
robust stainless steel housings, the high
level of EMC immunity and degree
of protection IP67.

High system availability

• High immunity to interferences due to a
high level of EMC

• The robust stainless steel housing

prevents damage produced by harsh
mechanical strains.

• Degree of protection IP67 provides

safety even under extreme operating
conditions

• Minimum maintenance effort because

of optimised exposure to temperature

High level of service-friendliness

The sensors offer pivotal calculable
benefits owing to their extremely flexible
mounting options, user-friendliness and
the high degrees of accuracy:

• Upper sensor section can be rotated

by 320° with the TS-500 variant

• Minimum maintenance due to reduced

number of types

• Simple programming using two finger

operated buttons

• Avoidance of unintentional operating

errors by recessed button for saving
parameters

4 /0110 Hans Turck GmbH & Co.KG • 45472 Mülheim/Ruhr • Germany • Tel. 0208 4952-0 • Fax 0208 4952-264• E-Mail: [email protected] • www.turck.com
HIGHEST LEVEL OF FLEXIBILITY
WITH FEW VARIANTS

Efficient standardization
Good news, that several conventional
sensors can be replaced with a single
sensor. Streamlining the product range
pays off.

Your benefits:
• Very large range of applications with
just a few sensor variants

• Reduced training requirements due to

simple and reliable operating features

• High level of system reliability due to a

robust design

• 4-pin standard M12 connector to

sensor and processor unit

Maximum degree of freedom

The new temperature sensor offers a
whole range of application possibilities
due to its high flexibility. Almost all
demands can be covered with just a few
devices. This provides a maximum of
planning flexibility with a minimum of
mounting effort and expense.

• Rotation of the upper sensor section

by 320°

• Display can be rotated by 180°

• Display angle 45°

• The display is clearly visible at

extended distances due to the large,
bright LED display

• Highest accuracy with 0.2 K

• Versions with two switching outputs or

one programmable combination of
switching and analogue output

Rotatable display

Horizontal installation is also possible.

The display can be rotated by 180° by
using software and is thus clearly visible
in every installation situation.

Hans Turck GmbH & Co.KG • 45472 Mülheim/Ruhr • Germany • Tel. 0208 4952-0 • Fax 0208 4952-264• E-Mail: [email protected] • www.turck.com 5 /0110
TEMPERATURE SENSORS –
HIGHEST LEVEL OF FLEXIBILITY

EVALUATION
Connecting cable
C
page 14
pa

Compact
Co probe Special
Sp probe
TP-103 TP-104
page 12 page 12

SENSOR
Compression
sion
n
fitting
CF-…
page 22

PROCESS INT

PROCESS
6 /01
/0110
0110
0 Hans Turck GmbH & Co.KG
KG • 4 5472 M
45472 ülheim
ülh e /Ru
eim Ruhr • Germ
Mülheim/Ruhr G many • Tel. 0208 4952-0 • Fa
Germany Fax 0208 4952-264
20
0208 4• E
4952-264• -Mail:
M mo
E-Mail: more@
re@tur
turck.com
m • www.turck.com
[email protected]
 Temperature sensor
or
TS-400/TS-500
page 10

TS-400
0 TS-500
T

Cable probe Standard

S t probe
TP-306 TP-203/206
page 12 page 12

Compressionon
n Stand
Standard
ndard Special
fitting mowell
thermowell thermowell
CF-… THW-… THW-…
page 22 page 16-20 page 16-20

TEGRATION

Hans Turck
urck GmbH & Co.KG
Turc KG • 45472
2 Mülheim/Ruhr
45472
45 M • Germany • Tel.. 0208
0 4952-0 • Faxx 0208 4952-264•
0 08 49
952- [email protected]
52 264• E-Mail: more@turck. www.turck.com
k com • ww
ww.turck.com 7 /0110
TYPE CODE

The TURCK type code leaves no questions unanswered in the definition of the required stock item.
All variants are specified simply and clearly.
Temperature sensor – Signal processors

TS - 400 - LI2UPN 8 X - H1141

Connection
H1141 4-pin M12 connector

with LED display

Operational voltage
8 18...30 VDC

Output function Output 1 Output 2

2UPN Switching output Switching output
LUUPN Switching output Voltage output
LI2UPN Switching output Current-/Switching output

Housing
4 adjustable, with indication, sensorbody not rotatable
5 adjustable, with indication, sensorbody rotatable

Temperature sensor

Temperature probe

TP - 1 03A - G1/8 - H1141 - L013

Temperature Insertion depth
probe Insertion depth > 300 mm on request

Probe type Connection

1 probe with process H1141 4-pin M12 connector
connection
2 probe for
Process connection
compression fitting
G1/8 G1/8“ male thread
or thermowell
TRI3/4 3/4“ Tri-Clamp
3 cable sensor
DN25K DN25 hygienic fitting DIN11851
CF Compression fitting
Probe diameter
03A 3 mm
04A 4 mm
06A 6 mm

8 /0110 Hans Turck GmbH & Co.KG

.KG • 4547
4
45472
5472 Mü
M
Mülheim/Ruhr
ülheim/R
ülhe /Ruhr • Germany • Tel. 0208 4952-0 • Fax 0208 4952-264• E-Mail: [email protected] • www.turck.com
TYPE CODE

Thermowell

THW - 3 - G1/8 - A4 - L013

Thermowell Insertion depth

For sensor diameter

3 3 mm outer diameter Material
6 6 mm outer diameter A4 stainless steel AISI316L / 1.4404

Process connection
G1/8 G1/8" male thread
N1/8 1/8" NPT male thread
G1/4 G1/4" male thread
N1/4 1/4" NPT male thread
G1/2 G1/2" male thread
N1/2 1/2" NPT male thread
TRI3/4 3/4" Tri-Clamp
DN25K DN25 hygienic fitting
thread DIN 11851

Compressing Fitting

CF - M - 3 - G1/8 - A4
Compression Material
fitting A4 stainless steel AISI 316L / 1.4404

Material of the Process connection

compression ring G1/8 G1/8" male thread
M AISI316L N1/8 1/8" NPT male thread
P PTFE G1/4 G1/4" male thread
N1/4 1/4" NPT male thread
For probe diameter
3 3 mm
6 6 mm

Hans Turck GmbH & Co.KG • 45472 Mülheim/Ruhr • Germany • Tel. 0208 4952-0 • Fax 0208 4952-264• E-Mail: [email protected] • www.turck.com 9 /0110
SIGNAL PROCESSING UNIT TS-400/TS-500

Dimensional drawing Type Temperature range

TS-400-LI2UPN8X-H1141 -50…500 °C

TS-400-LUUPN8X-H1141 -50…500 °C

TS-500-2UPN8X-H1141 -50…500 °C

ø 34
90
M12 x 1
110

30

ø 18

TS-500-LI2UPN8X-H1141 -50…500 °C

TS-500-LUUPN8X-H1141 -50…500 °C

TS-500-2UPN8X-H1141 -50…500 °C

ø 34
95
M12 x 1
110

30

ø 18

10 /0110 Hans Turck GmbH & Co.KG • 45472 Mülheim/Ruhr • Germany

many
ny • Te
Tel
Tel.l. 0
0208
208 4952
4
4952-0
9 2-0 • Fax 0208 495
4952-264• E-Mail: [email protected] • www.turck.com
Description Material Ident-No.

Fixed processor unit for Pt100 in 4-wire technology, AISI 316L/1.4404 6840007
1 switching output PNP, 1 analogue output (mA)
Fixed processor unit for Pt100 in 4-wire technology, AISI 316L/1.4404 6840008
1 switching output PNP, 1 analogue output (V)
Fixed processor unit for Pt100 in 4-wire technology, AISI 316L/1.4404 6840017
2 programmable outputs in function and logic

Rotatable processor unit for Pt100 in 4-wire technology, AISI 316L/1.4404 6840015
1 switching output PNP, 1 analogue output (mA)

Preferred Types
Rotatable processor unit for Pt100 in 4-wire technology, AISI 316L/1.4404 6840016
1 switching output PNP, 1 analogue output (V)
Rotatable processor unit for Pt100 in 4-wire technology, AISI 316L/1.4404 6840018
2 programmable outputs in function and logic

Simple mounting

After the sensor is mounted the actual

processor unit is attached and fixed using
a coupling nut. The sensor can still be
rotated and aligned in all directions..

Hans Turck GmbH & Co.KG • 45472 Mülheim/Ruhr • Germany • Tel. 0208 4952-0 • Fax 0208 4952-264• E-Mail: [email protected] • www.turck.com 11 /0110
TEMPERATURE PROBES

Dimensional drawing Type Temperature range

M12 x 1
TP-103A-G1/8-H1141-L013 -50…120 °C
ø 14
14
1/8"
ø 3,5 11,5
33
ø 3,1
10
34
TP-103A-G1/8-H1141-L024 -50…120 °C

TP-104A-TRI3/4-H1141-L035 -50…120 °C
M12 x 1

ø 25
125
ø8
100
TP-104A-TRI3/4-H1141-L100 -50…120 °C
ø4 20

TP-104A-DN25K-H1141-L035 -50…120 °C
ø 44

M12 x 1

ø8
133 TP-104A-DN25K-H1141-L100 -50…120 °C
100
ø4 20

TP-203A-CF-H1141-L100 -50…500 °C *
TP-203A-CF-H1141-L150 -50…500 °C *
M12 x 1 TP-203A-CF-H1141-L200 -50…500 °C *
ø 14
TP-203A-CF-H1141-L250 -50…500 °C *
ø6
34 TP-203A-CF-H1141-L300 -50…500 °C *
300 TP-206A-CF-H1141-L100 -50…500 °C *
TP-206A-CF-H1141-L150 -50…500 °C *
TP-206A-CF-H1141-L200 -50…500 °C *
TP-206A-CF-H1141-L300 -50…500 °C *
TP-306A-CF-H1141-L1000 -50…105 °C

M12 x 1
ø 14

TP-306A-CF-H1141-L2000 -50…105 °C
34

5000

ø6

50
TP-306A-CF-H1141-L5000 -50…105 °C

* Resistance of connector
limited to temperatures of
up to 120 °C
not higher!

12 /0110 Hans Turck GmbH & Co.KG • 45472 Mülheim/Ruhr • Germany • Tel. 0208 4952-0 • Fax 0208 4952-264• E-Mail: [email protected]
m • www.tu
urck.com
www.turck.com
Description Material Ident-No.

Temperature probe Pt100 Class A, Ø conical 3.5 to 3.1 mm, Nylon/AISI 316L/1.4404 9910400
process connection G1/8" male thread, insertion depth 13 mm
Temperature probe Pt100 Class A, Ø conical 3.5 to 3.1 mm, Nylon/AISI 316L/1.4404 9910401
process connection G1/8" male thread, insertion depth 24 mm
Temperature probe Pt100 Class A, Ø 8 mm with 4 mm Nylon/AISI 316L/1.4404 9910429
probe tip, process connection 3/4" Tri-Clamp flange,
insertion depth 35 mm
Temperature probe Pt100 Class A, Ø 8 mm with 4 mm Nylon/AISI 316L/1.4404 9910430
probe tip, process connection 3/4" Tri-Clamp flange,
insertion depth 100 mm
Temperature probe Pt100 Class A, Ø 8 mm with 4 mm probe tip, Nylon/AISI 316L/1.4404 9910431
process connection DN25 to DIN 11851 (hygienic fitting),
insertion depth 35 mm
Temperature probe Pt100 Class A, Ø 8 mm with 4 mm probe tip, Nylon/AISI 316L/1.4404 9910432
process connection DN25 to DIN 11851 (hygienic fitting),
insertion depth 100 mm
Temperature probe Pt100 Class A, Ø 3 mm/length 100 mm Nylon/AISI 316L/1.4404 9910402
Temperature probe Pt100 Class A, Ø 3 mm/length 150 mm Nylon/AISI 316L/1.4404 9910403
Temperature probe Pt100 Class A, Ø 3 mm/length 200 mm Nylon/AISI 316L/1.4404 9910482
Temperature probe Pt100 Class A, Ø 3 mm/length 250 mm Nylon/AISI 316L/1.4404 9910404
Temperature probe Pt100 Class A, Ø 3 mm/length 300 mm Nylon/AISI 316L/1.4404 9910474
Temperature probe Pt100 Class A, Ø 6 mm/length 100 mm Nylon/AISI 316L/1.4404 9910475
Temperature probe Pt100 Class A, Ø 6 mm/length 150 mm Nylon/AISI 316L/1.4404 9910476
Temperature probe Pt100 Class A, Ø 6 mm/length 200 mm Nylon/AISI 316L/1.4404 9910477
Temperature probe Pt100 Class A, Ø 6 mm/length 300 mm Nylon/AISI 316L/1.4404 9910478
Cable sensor Pt100 Class A, (4-wire) with stainless steel jacket Nylon/AISI 316L/1.4404 9910479
6 x 50 mm, 1 m cable with connector, 4-pin M12 x 1,
hot moulded and water-tight

Preferred Types
Cable sensor Pt100 Class A, (4-wire) with stainless steel jacket Nylon/AISI 316L/1.4404 9910480
6 x 50 mm, 2 m cable with connector, 4-pin M12 x 1,
hot moulded and water-tight
Cable sensor Pt100 Class A, (4-wire) with stainless steel jacket Nylon/AISI 316L/1.4404 9910481
6 x 50 mm, 5 m cable with connector, 4-pin M12 x 1,
hot moulded and water-tight

High degree of protection

The TS400/TS500 temperature sensors

feature IP67 degree of protection in order
to comply with the high demands of
machine engineering.

Hans Turck GmbH & Co.KG • 45472 Mülheim/Ruhr • Germany • Tel. 0208 4952-0 • Fax 0208 4952-264• E-Mail: [email protected] • www.turck.com 13 /0110
CABLES

Dimensional drawing Type Material

M12 x 1
WAK4-2-WAS4/S74 Connector: CuZn, TPU,
M12 x 1
ø 15
ø 15 Gold-plated contacts
42 48,5 Seal: FPM (Viton)
ø 10,2
ø 10,2
ø 11,6 12 ø 11,65 12 Cable: PUR

M12 x 1 M12 x 1 FB-WAK4-2-FB-WAS4/S2300 Connector: Stainless steel, PPH GF20,

14 14
ø 15 ø 15 Gold-plated contacts
42
48,5
Seal: FPM (Viton)
ø 10,2
ø 10,2
ø 11,6 12 ø 11,6 12 Cable: PP

M12 x 1
WAK4-1-WAS4/S366/S367 Connector: CuZn, TPU,
ø 15
M12 x 1
ø 15
Gold-plated contacts
42
Seal: FPM (Viton)
48,5
ø 10,2
ø 10,2
Cable: PUR
ø 11,6 12 ø 11,65 12

M12 x 1
M12 x 1
WAK4-2-WAS4/S2429/S2430 Connector:
ø 15 ø 15 Contacts CuZn/beryllium
42 48,5 Seal: FPM/FKM
ø 10,2 ø 10,2
ø 11,6 12 ø 11,65 12 Cable: PTFE

14 /0110 Hans Turck GmbH & Co.KG • 45472 Mülheim/Ruhr • Germany • Tel. 0208 4952-0 • Fax 0208 4952-264• E-Mail: [email protected] • www.turck.com
Description Temperature Ident-No.
range
2 m connecting cable, IP67, robust, connector M12 x 1, Connector: 8006744
PVC and halogen-free, top-quality PUR cable for the -30…90 °C
automotive industry, highly flexible Cable:
-40…105 °C

2 m connecting cable, IP67 and IP69K, Connector: 8033677

connector M12 x 1, PP cable, -30…90 °C
flame-retardant acc.to DIN VDE 0472, part 804, type B especially Cable:
suited for applications of the Food & Beverage industry -40…105 °C

1 m connecting cable, IP67, robust, connector M12 x 1, Connector: 8022850

PVC and halogen-free top-quality PUR cable, -30…90 °C
flame-retardant acc. to DIN VDE 0472 part 804, type B Cable:
high quality standard cables for standard applications of the -40…90 °C
Food & Beverage industry

2 m connecting cable, IP65, robust, premoulded round Connector: 8038668

Preferred Types
connector M12 x 1, PTFE-cable, -20…150 °C
for high temperature applications Cable:
-90…260 °C

Highest connection safety

Robust connection cables, premoulded.

Hans Turck GmbH & Co.KG • 45472 Mülheim/Ruhr • Germany • Tel. 0208 4952-0 • Fax 0208 4952-264• E-Mail: [email protected] • www.turck.com 15 /0110
THERMOWELLS

Dimensional drawing Type Material

ø 44
THW-3-DN25K-A4-L050 AISI 316L/1.4404

THW-3-DN25K-A4-L100 AISI 316L/1.4404

135 THW-3-DN25K-A4-L150 AISI 316L/1.4404

ø8
100
ø4 20 THW-3-DN25K-A4-L250 AISI 316L/1.4404

THW-3-G1/2-A4-L050 AISI 316L/1.4404

24
G1/2"
THW-3-G1/2-A4-L100 AISI 316L/1.4404
ø5
THW-3-G1/2-A4-L150 AISI 316L/1.4404
100
THW-3-G1/2-A4-L250 AISI 316L/1.4404

THW-3-G1/4-A4-L050 AISI 316L/1.4404

17
G1/4"
THW-3-G1/4-A4-L100 AISI 316L/1.4404
ø5
THW-3-G1/4-A4-L150 AISI 316L/1.4404
200
THW-3-G1/4-A4-L200 AISI 316L/1.4404

THW-3-G1/8-A4-L050 AISI 316L/1.4404

14
THW-3-G1/8-A4-L100 AISI 316L/1.4404
G1/8"
ø5 THW-3-G1/8-A4-L150 AISI 316L/1.4404

200 THW-3-G1/8-A4-L200 AISI 316L/1.4404

404

16 /0110 Hans Turck GmbH & Co.KG • 45472 Mülheim/Ruhr • Germany • Tel. 0208 4952-0 • Fax 0208 4952-264• E-Mail: [email protected] • www.turck.com
Description Ident-No

Thermowell (external Ø 8 mm, probe tip Ø 4 mm), hygienic fitting DN25 9910455
acc. to DIN 11851 with compression fitting, for 3 mm probe, insertion depth 50 mm
Thermowell (external Ø 8 mm, probe tip Ø 4 mm), hygienic fitting DN25 9910456
acc. to DIN 11851 with compression fitting, for 3 mm probe, insertion depth 100 mm
Thermowell (external Ø 8 mm, probe tip Ø 4 mm), hygienic fitting DN25 9910457
acc. to DIN 11851 with compression fitting, for 3 mm probe, insertion depth 150 mm
Thermowell (external Ø 8 mm, probe tip Ø 4 mm), hygienic fitting DN25 9910458
acc. to DIN 11851 with compression fitting, for 3 mm probe, insertion depth 250 mm
Thermowell, length 50 mm with G1/2" male thread and 9910443
compression fitting, for 3 mm probe
Thermowell, length 100 mm with G1/2" male thread and 9910444
compression fitting, for 3 mm probe
Thermowell (external Ø 5 mm, internal Ø 3.5 mm) length 150 mm 9910445
with G1/2" male thread and compression fitting, for 3 mm probe
Thermowell (external Ø 5 mm, internal Ø 3.5 mm) length 250 mm 9910446
with G1/2" male thread and compression fitting, for 3 mm probe
Thermowell (external Ø 5 mm, internal Ø 3.5 mm) length 50 mm with 9910415
G1/4" male thread and compression fitting, for 3 mm probe
Thermowell (external Ø 5 mm, internal Ø 3.5 mm) length 100 mm 9910419
with G1/4" male thread and compression fitting, for 3 mm probe
Thermowell (external Ø 5 mm, internal Ø 3.5 mm) length 150 mm 9910423
with G1/4" male thread and compression fitting (AISI316L), for 3 mm probe
Thermowell (external Ø 5 mm, internal Ø 3.5 mm) length 200 mm 9910427
with G1/4" male thread and compression fitting, for 3 mm probe
Thermowell (external Ø 5 mm, internal Ø 3.5 mm) length 50 mm 9910413
with G1/8" male thread and compression fitting, for 3 mm probe
Thermowell (external Ø 5 mm, internal Ø 3.5 mm) length 100 mm 9910417
with G1/8" male thread and compression fitting (AISI316L), for 3 mm probe

Preferred Types
Thermowell (external Ø 5 mm, internal Ø 3.5 mm) length 150 mm 9910421
with G1/8" male thread and compression fitting, for 3 mm probe
Thermowell (external Ø 5 mm, internal Ø 3.5 mm) length 200 mm 9910425
with G1/8" male thread and compression fitting, for 3 mm probe

Clearly readable display

The display with a large and easily visible

4-digit 7-segment display is tilted by 45°.
Thus it can be read from every position,
even from a large distance. The tempera-
ture unit is displayed permanently. All of
these features guarantee a high degree of
operational safety.

Hans Turck GmbH & Co.KG • 45472 Mülheim/Ruhr • Germany • Tel. 0208 4952-0 • Fax 0208 4952-264• E-Mail: [email protected] • www.turck.com 17 /0110
THERMOWELLS

Dimensional drawing Type Material

THW-3-N1/2-A4-L050 AISI 316L/1.4404

22
N1/2"
THW-3-N1/2-A4-L100 AISI 316L/1.4404
ø5
THW-3-N1/2-A4-L150 AISI 316L/1.4404
250
THW-3-N1/2-A4-L250 AISI 316L/1.4404

THW-3-N1/4-A4-L050 AISI 316L/1.4404

14
N1/4" THW-3-N1/4-A4-L100 AISI 316L/1.4404
ø5
THW-3-N1/4-A4-L150 AISI 316L/1.4404

200
THW-3-N1/4-A4-L200 AISI 316L/1.4404

THW-3-N1/8-A4-L050 AISI 316L/1.4404

12
N1/8" THW-3-N1/8-A4-L100 AISI 316L/1.4404
ø5

THW-3-N1/8-A4-L150 AISI 316L/1.4404

200
THW-3-N1/8-A4-L200 AISI 316L/1.4404

THW-3-TRI3/4-A4-L035 AISI 316L/1.4404

THW-3-TRI3/4-A4-L050 AISI 316L/1.4404

ø 25 THW-3-TRI3/4-A4-L100 AISI 316L/1.4404

275
ø8
250 THW-3-TRI3/4-A4-L150 AISI 316L/1.4404
04
ø4 20

THW-3-TRI3/4-A4-L250 AISI 316L/1.4404

04

18 /0110 Hans Turck GmbH & Co.KG • 45472 Mülheim/Ruhr • Germany • Tel. 0208 4952-0 • Fax 0208 4952-264• E-Mail: [email protected] • www.turck.com
Description Ident-No.

Thermowell (external Ø 5 mm, internal Ø 3.5 mm) length 50 mm 9910447

with 1/2" NPT male thread and compression fitting, für 3 mm probe
Thermowell (external Ø 5 mm, internal Ø 3.5 mm) length 100 mm 9910448
with 1/2" NPT male thread and compression fitting, für 3 mm probe
Thermowell (external Ø 5 mm, internal Ø 3.5 mm) length 150 mm 9910449
with 1/2" NPT male thread and compression fitting, für 3 mm probe
Thermowell (external Ø 5 mm, internal Ø 3.5 mm) length 250 mm 9910450
with 1/2" NPT male thread and compression fitting, für 3 mm probe
Thermowell (external Ø 5 mm, internal Ø 3.5 mm) length 50 mm 9910416
with 1/4" NPT male thread and compression fitting, für 3 mm probe
Thermowell (external Ø 5 mm, internal Ø 3.5 mm) length 100 mm with 9910420
1/4" NPT male thread and compression fitting (AISI316L), for 3 mm probe
Thermowell (external Ø 5 mm, internal Ø 3.5 mm) length 150 mm 9910424
with 1/4" NPT male thread and compression fitting, für 3 mm probe
Thermowell (external Ø 5 mm, internal Ø 3.5 mm) length 200 mm 9910428
with 1/4" NPT male thread and compression fitting, für 3 mm probe
Thermowell (external Ø 5 mm, internal Ø 3.5 mm) length 50 mm 9910414
with 1/8" NPT male thread and compression fitting, für 3 mm probe
Thermowell (external Ø 5 mm, internal Ø 3.5 mm) length 100 mm 9910418
with 1/8" NPT male thread and compression fitting, für 3 mm probe
Thermowell (external Ø 5 mm, internal Ø 3.5 mm) length 150 mm 9910422
with 1/8" NPT male thread and compression fitting, für 3 mm probe
Thermowell (external Ø 5 mm, internal Ø 3.5 mm) length 200 mm 9910426
with 1/8" NPT male thread and compression fitting, für 3 mm probe
Thermowell (external Ø 8 mm, probe tip Ø 4 mm), 3/4" Tri-Clamp 9910433
with compression fitting, for 3 mm probe, insertion depth 35 mm
Thermowell (external Ø 8 mm, probe tip Ø 4 mm), 3/4" Tri-Clamp process connection 9910451
with compression fitting, for 3 mm probe, insertion depth 50 mm

Preferred Types
Thermowell (external Ø 8 mm, probe tip Ø 4 mm), 3/4" Tri-Clamp process connection 9910452
with compression fitting, for 3 mm probe, insertion depth 100 mm
Thermowell (external Ø 8 mm, probe tip Ø 4 mm), 3/4" Tri-Clamp process connection 9910453
with compression fitting, for 3 mm probe, insertion depth 150 mm
Thermowell (external Ø 8 mm, probe tip Ø 4 mm), 3/4" Tri-Clamp process connection 9910454
with compression fitting, for 3 mm probe, insertion depth 250 mm

Highest levels of operating comfort

The “Mode” and “Set” buttons can be

operated with a finger. No additional
tools are required in order to view the
parameter values. Both buttons are used
as "Up" and "Down" keys in the user
friendly programming menu. They are
used for precise parameter setting.

Hans Turck GmbH & Co.KG • 45472 Mülheim/Ruhr • Germany • Tel. 0208 4952-0 • Fax 0208 4952-264• E-Mail: [email protected] • www.turck.com 19 /0110
THERMOWELLS

Dimensional drawing Type Material

ø 44 THW-6-DN25K-A4-L050 AISI 316L/1.4404

THW-6-DN25K-A4-L100 AISI 316L/1.4404

285 THW-6-DN25K-A4-L150 AISI 316L/1.4404

ø9 250
THW-6-DN25K-A4-L250 AISI 316L/1.4404

THW-6-G1/2-A4-L050 AISI 316L/1.4404

24
G1/2" THW-6-G1/2-A4-L100 AISI 316L/1.4404
ø9
THW-6-G1/2-A4-L150 AISI 316L/1.4404

250
THW-6-G1/2-A4-L250 AISI 316L/1.4404

THW-6-N1/2-A4-L050 AISI 316L/1.4404

22
N1/2"
THW-6-N1/2-A4-L100 AISI 316L/1.4404
ø9
THW-6-N1/2-A4-L150 AISI 316L/1.4404
250
THW-6-N1/2-A4-L250 AISI 316L/1.4404

THW-6-TRI3/4-A4-L050 AISI 316L/1.4404

THW-6-TRI3/4-A4-L100 AISI 316L/1.4404

ø 25 THW-6-TRI3/4-A4-L150 AISI 316L/1.4404

275

ø9 250 THW-6-TRI3/4-A4-L250 AISI 316L/1.4404

20 /0110 Hans Turck GmbH & Co.KG • 45472 Mülheim/Ruhr • Germany • Tel. 0208 4952-0 • Fax 0208 4952-264•
952-264
264• E
E-Mail:
-Mail: [email protected]
[email protected] • www.turck.com
Description Ident-No.

Thermowell, (external Ø 9 mm), hygienic fitting DN25 acc. to DIN 11851 9910471
with compression fitting, for 6 mm probe, insertion depth 50 mm
Thermowell, (external Ø 9 mm), hygienic fitting DN25 acc. to DIN 11851 9910436
with compression fitting, for 6 mm probe, insertion depth 100 mm
Thermowell, (external Ø 9 mm), hygienic fitting DN25 acc. to DIN 11851 9910472
with compression fitting, for 6 mm probe, insertion depth 150 mm
Thermowell, (external Ø 9 mm), hygienic fitting DN25 acc. to DIN 11851 9910473
with compression fitting, for 6 mm probe, insertion depth 250 mm
Thermowell, (external Ø 9 mm, internal Ø 7 mm), length 50 mm 9910459
with G1/2" male thread and compression ferrule fitting, for 6 mm probe
Thermowell, (external Ø 9 mm, internal Ø 7 mm), length 100 mm 9910460
with G1/2" male thread and compression ferrule fitting, for 6 mm probe
Thermowell, (external Ø 9 mm, internal Ø 7 mm), length 150 mm 9910461
with G1/2" male thread and compression ferrule fitting, for 6 mm probe
Thermowell, (external Ø 9 mm, internal Ø 7 mm), length 250 mm 9910462
with G1/2" male thread and compression ferrule fitting, for 6 mm probe
Thermowell, (external Ø 9 mm, internal Ø 7 mm), length 50 mm 9910463
with 1/2" NPT male thread and compression ferrule fitting, for 6 mm probe
Thermowell, (external Ø 9 mm, internal Ø 7 mm), length 100 mm 9910464
with 1/2" NPT male thread and compression ferrule fitting, for 6 mm probe
Thermowell, (external Ø 9 mm, internal Ø 7 mm), length 150 mm 9910465
with G1/2" male thread and compression ferrule fitting, for 6 mm probe
Thermowell, (external Ø 9 mm, internal Ø 7 mm), length 250 mm 9910466
with 1/2" NPT male thread and compression ferrule fitting, for 6 mm probe
Thermowell, (external Ø 9 mm), 3/4" Tri-Clamp with compression fitting, 9910467
for 6 mm probe, insertion depth 50 mm
Thermowell, (external Ø 9 mm), 3/4" Tri-Clamp with compression fitting, 9910468
for 6 mm probe, insertion depth100 mm

Preferred Types
Thermowell, (external Ø 9 mm), 3/4" Tri-Clamp with compression fitting, 9910469
for 6 mm probe, insertion depth 150 mm
Thermowell, (external Ø 9 mm), 3/4" Tri-Clamp with compression fitting, 9910470
for 6 mm probe, insertion depth 250 mm

Maximum operational safety

Mineral insulated sensors feature a very

high flectional elasticity.

Hans Turck GmbH & Co.KG • 45472 Mülheim/Ruhr • Germany • Tel. 0208 4952-0 • Fax 0208 4952-264• E-Mail: [email protected] • www.turck.com 21 /0110
COMPRESSION FITTINGS

Dimensional drawing Type Material

CF-M-3-G1/4-A4 AISI 316L/1.4404

14
CF-M-3-G1/8-A4 AISI 316L/1.4404
G1/8"

CF-M-3-N1/4-A4 AISI 316L/1.4404

10

CF-M-3-N1/8-A4 AISI 316L/1.4404

CF-P-3-G1/4-A4 AISI 316L/1.4404

14
CF-P-3-G1/8-A4 AISI 316L/1.4404
G1/8"

CF-P-3-N1/4-A4 AISI 316L/1.4404

10

CF-P-3-N1/8-A4 AISI 316L/1.4404

CF-M-6-G1/4-A4 AISI 316L/1.4404

14 CF-M-6-N1/4-A4 AISI 316L/1.4404

G1/8"

CF-P-6-G1/4-A4 AISI 316L/1.4404

10

CF-P-6-N1/4-A4 AISI 316L/1.4404

22 /0110 Hans Turck GmbH & Co.KG • 45472 Mülheim/Ruhr • Germany • Tel. 0208 4952-0 • Fax 0208 4952-264• E-Mail: [email protected] • www.turck.com
Description Ident-No.

Threaded adapter G1/4" with metal compression fitting for direct 9910407
mounting of 3 mm probes, max. temp. 350 °C, max. pressure 100 bar
Threaded adapter G1/8" with metal compression fitting for direct 9910405
mounting of 3 mm probes, max. temp. 350 °C, max. pressure 100 bar
Threaded adapter 1/4" NPT with metal compression fitting for direct 9910408
mounting of 3 mm probes, max. temp. 350 °C, max. pressure 100 bar
Threaded adapter 1/8" NPT with metal compression fitting for direct 9910406
mounting of 3 mm probes, max. temp. 350 °C, max. pressure 100 bar
Threaded adapter G1/4" NPT with PTFE compression fitting for direct 9910411
mounting of 3 mm probes, max. temp. 100 °C, max. pressure 20 bar
Threaded adapter G1/8" NPT with PTFE compression fitting for direct 9910409
mounting of 3 mm probes, max. temp. 100 °C, max. pressure 20 bar
Threaded adapter 1/4" NPT with PTFE compression fitting for direct 9910412
mounting of 3 mm probes, max. temp. 100 °C, max. pressure 20 bar
Threaded adapter 1/8" NPT with PTFE compression fitting for direct 9910410 
mounting of 3 mm probes, max. temp. 100 °C, max. pressure 20 bar
Threaded adapter G1/4" with metal compression fitting for direct 9910483
mounting of 6 mm probes, max. temp. 350 °C, max. pressure 100 bar
Threaded adapter 1/4" NPT with metal compression fitting for direct 9910484
mounting of 6 mm probes, max. temp. 350 °C, max. pressure 100 bar
Threaded adapter G1/4" with PTFE compression fitting for direct 9910485

Preferred Types
mounting of 6 mm probes, max. temp. 100 °C, max. pressure 20 bar
Threaded adapter 1/4" NPT with PTFE compression fitting for direct 9910486
mounting of 6 mm probes, max. temp. 100 °C, max. pressure 20 bar

Mounting in 40 mm grid dimensions

in compact spaces

With a housing diameter of just 34 mm

multiple temperature sensors can be
fitted in narrow spaces.

Hans Turck GmbH & Co.KG • 45472 Mülheim/Ruhr • Germany • Tel. 0208 4952-0 • Fax 0208 4952-264• E-Mail: [email protected] • www.turck.com 23 /0110
MAXIMUM OPERATING COMFORT WITH
PROGRAMMING

One of the most important aspects of

intelligent temperature sensors is the level
of user friendliness concerning their
handling. The clear menu structure
enables the programming of setpoint
values, output functions, analogue ranges
and many special functions such as
switch delays, rotation and display
direction or peak temperature memory.
Additional devices such as a notebook or
a special programming device are not
required.

The temperature sensors of the TS-400/ To improve operation, it is possible to

TS-500 series can be programmed very scroll up and down the values. If the set
easy with three push buttons. Both the value has to be saved and the program-
“Mode” and “Set” buttons which can be ming must be changed, press the “Enter”
used to select and set different param- button. This button is recessed and can
eters, can be operated with fingers. only be operated by using a tool such as
Additional tools are not necessary. a ballpoint pen.

As long as the operator does not use a

tool, he can comfortably view all values
and change them after waiting for the end
of a time lock interval. Unintentional
changes to the program are not a danger.
The operator can only modify the sensor
settings with a tool. .

24 /0110 Hans Turck GmbH & Co.KG • Witzlebenstraße 7 • 45472 Mülheim/Ruhr • Germany • Phone
Phon 4952-0
ne 0208 49
4952
52-0
52 Fax
0 • Fa
ax 0208
0208 4952-264
08 49
4 52-264
52- 264 www.turck.com
64 • www
w ww.tu
t rckk.co
tu om
 lock-function 10 s lock 10 s unlock
Mode + Set push- Loc Mode + Set push- uLoc
buttons buttons

run-mode

Mode

standard Uni >5s

functions Mode Set show
ou1 value Set
Mode 1) Mode flashing no flashing:
SP1 FH1 1)
Mode nur bei Fensterfunktion/ change
rP1 FL1 only with window function/ value
Mode uniquement avec fonction fenêtre
ou2 Set
Mode 1) Enter
SP2 FH2 Mode
Mode
rP2 FL2

Mode

EF Mode

Set

extended Hi Set >5s

functions Mode show
value Set
Lo Mode
Mode flashing no flashing:
CoF
Mode 1) erase
dSP1 dFH1 value
Mode 1) nur bei Fensterfunktion/ (HI and LO)
drP1 dFL1 only with window function/ or
Mode uniquement avec fonction fenêtre
dSP2 dFH2 change
Mode value
drP2 dFL2
Mode Set
dAP Enter
Mode Mode
P-n
Mode
diS

Mode
>5s
Set Nach 60 s oder bei Betätigung
rES reset von Mode + Set erfolgt ein
Rücksprung in den "run-mode"./
Mode Reset to "run-mode" after 60 s
or pressing Mode + Set /
Après 60 secondes ou en
Set show actionnant le mode + set
Mode SoF value on retourne au mode run.
Mode

Schematic representation of the menu interface using a temperature sensor with 2 switching
outputs as an example

Robust design

The housing, the temperature connection

and the electrical connection are made
of stainless steel. The sensor features
excellent electromagnetic compatibility
(EMC).

H
Han
Hans
an
ans T
ans Turck
urc
urc
rck GmbH
GmbH
bH
H & Co.
C
Co.KG
o.
oK KG
G • Witz
W
Witzlebenstraße
ititz
tzleb
tz le en
leb ens
e n
nstr
trra
aße
ße 7 • 45472 Mülheim/Ruhr • Germany • Phone 0208 4952-0 • Fax 0208 4952-264 • www.turck.com 25 /0110
TECHNICAL DATA

Power supply Temperature sensor housing

Operating voltage 15...30 VDC (switching outputs) Housing material 1.4305/PC

18...30 VDC
(switching and analogue output) Electrical connection Connector M12 x 1, 4-pin

No-load current ≤ 50 mA
Sensor connection Connector M12 x 1, 4-pin
SELV, PELV according to EN 50178
Coupling nut size SW 30 (max. 35 Nm)
Short-circuit protection yes (with tightening torque)

Reverse polarity protection yes Display

Insulation class III Temperature display 4-digit 7-segment display

can be rotated by 180° and
Switching output switched off

Switching frequency ≤ 180 Hz Switch state display 2 x LED yellow

Output function 2 x PNP/NPN, Measured value/Programming Switch/release points;

NC/NO programmable hysteresis/window mode;
N.O./N.C.;
Voltage drop at Ie ≤2V unit of display;
peak value memory
Rated operational current 0.2 A
Display of temperature unit 4 x LED green (°C, °F, K, Ω)
Switching point distance 0.2 K
EMC
Switching point distance -49.8...+500 °C
EN 61000-4-2 ESD 4 kV CD / 8 kV AD
Release points -50...+499.8 °C
EN 61000-4-3 HF radiated: 15 V/m2
Analogue current output
EN 61000-4-4 Burst 2 kV
Current output 4...20 mA, 0...20 mA,
20...4 mA, EN 61000-4-5 Surge 1 kV, 42 Ω
20...0 mA programmable
EN 61000-4-6 HF conducted: 10 V
Response time < 100 ms

Load ≤ 0.5 kΩ Ambient conditions

Analogue voltage output Medium temperature -50...+500 °C,

depending on mounted probe
Voltage output 0...10 V, 0...5 V, 1...6 V, 10...0 V,
5...0 V, 6...1 V programmable
Ambient temperature -40...+80 °C
Response time < 100 ms
Storage temperature -40...+80 °C
Load ≥ 2 kΩ
Degree of protection IP67
Accuracy
Vibration resistance 20 g (10...2000 Hz)
Switching output according to IEC 68-2-6
Switching point accuracy ≤ ± 0.2 K
Repetition accuracy ≤ ± 0.1 K Shock resistance 50 g (11 ms) according to
IEC 68-2-27
Analogue output
Accuracy (Lin.+Hys.+Rep.) ≤ ± 0.2 K

26 /0110 Hans Turck GmbH & Co.KG • 45472 Mülheim/Ruhr • Germany • Tel. 0208 4952-0 • Fax 0208 4952-264• E-Mail: [email protected] • www.turck.com
 Standard probe (TP-203/TP-206) Special probe (TP-104)

Temperature operating range -50…+500 °C Temperature operating range -50…120 °C

-20… 350 °C accuracy class A
≥ 350 °C accuracy class B Ambient temperature -20…90 °C
≤ -20 °C accuracy class B
Measuring element Pt100, DIN EN 60751, Class A
Ambient temperature -20…+90 °C
Response time t0.5 = 3 s; t0.9 = 10 s in
Measuring element Pt100, DIN EN 60751, Class A water at 0.2 m/s

Response time t0.5 = 1.5 s; t0.9 = 6.0 s in Output function 4-wire

water at 0.2 m/s
Reverse polarity protection Yes
Output function 4-wire
Degree of protection IP67
Reverse polarity protection Yes
Housing material Stainless-steel/plastic
Degree of protection IP67
Housing quality 1.4404 (AISI 316L)
Housing material Stainless-steel/plastic
Sensor material Stainless-steel
Housing quality 1.4404 (AISI 316L)
mineral insulated Sensor quality 1.4404 (AISI 316L)

Sensor material Stainless steel Pressure resistance 40 bar

Sensor quality 1.4404 (AISI 316L) Connection Connector, M12 x 1

Pressure resistance 100 bar Mechanical connection Tri-Clamp 3/4"; DN25 hygienic
fitting according to DIN11851
Connection Connector, M12 x 1

Mechanical connection for compression fittings or Cable probe (TP-306)

thermowells
Temperature operating range -50…+105 °C

Ambient temperature -20…+90 °C

Compact probe (TP-103)
Measuring element Pt100, DIN EN 60751, Class A
Temperature operating range -50…120 °C
Response time t0.5 = 8 s; t0.9 = 20 s in
Ambient temperature -20…90 °C water at 0.2 m/s

Measuring element Pt100, DIN EN 60751, Class A Output function 4-wire

Response time t0.5 = 1.5 s; t0.9 = 6.0 s in Reverse polarity protection Yes
water at 0.2 m/s
Degree of protection IP68
Output function 4-wire
Housing material Plastic
Reverse polarity protection Yes
Housing quality TPE (thermoplastic elastomer)
Degree of protection IP67
Sensor material Stainless steel
Housing material Stainless-steel/plastic
Sensor quality 1.4404 (AISI 316L)
Housing quality 1.4404 (AISI 316L)
Pressure resistance 100 bar
mineral insulated
Connection Connector, M12 x 1
Sensor material Stainless steel
Mechanical connection for compression fittings,
Sensor quality 1.4404 (AISI 316L)
thermowells
Pressure resistance 100 bar or for direct mounting

Connection Connector, M12 x 1

Mechanical connection G1/8"

Hans Turck GmbH & Co.KG • 45472 Mülheim/Ruhr • Germany • Tel. 0208 4952-0 • Fax 0208 4952-264• E-Mail: [email protected] • www.turck.com 27 /0110
TURCK WORLD-WIDE HEADQUARTERS

GERMANY
Hans Turck GmbH & Co. KG
Witzlebenstraße 7
45472 Mülheim an der Ruhr
P. O. Box 45466 Mülheim an der Ruhr
Tel. +49 208 4952-0
Fax +49 208 4952-264
E-Mail [email protected]

AUSTRALIA HUNGARY THE NETHERLANDS

TURCK Australia Pty. Ltd. TURCK Hungary kft. TURCK B. V.
unit 5, 6-7 Gilda Court Mulgrave Könyves Kalman Krt.76 Postbus 297
Victoria 3170 1087 Budapest 8000 AG Zwolle
Tel. +61 (0) 3 95609066 Tel. +36 1 4770-740 Tel. +31 38 4227-750
Fax +61 (0) 3 95601620 Fax +36 1 4770-741 Fax +31 38 4227-451
E-Mail E-Mail [email protected] E-Mail [email protected]
[email protected]

BAHRAIN INDIA POLAND

TURCK Middle East S.P. TURCK India Automation Pvt Ltd. TURCK sp.z o.o
P.O. Box 18370 603/604, 6th Floor, A-wing Zeromskiego 1
Manama - Kingdom of Bahrain ICC Trade Towers, 45-053 Opole
Tel. +973 17 814920 Senapati Bapat Road, Tel. +48 77 4434-800
Fax +973 17 814925 Pune - 411016, Fax +48 77 4434-801
E-Mail Maharashtra - India E-Mail [email protected]
[email protected] Tel. + 91 20 25630039
25630040
Fax + 91 20 25630040
E-Mail [email protected]

BELGIUM ITALY ROMANIA

Multiprox N. V. TURCK BANNER S. R. L. TURCK Automation Romania SRL
P. B. 71 Via S.Domenico, 5 Str. luliu Tetrat nr. 18 Sector 1
Lion d’Orweg 12 20010 Bareggio (MI) 011914 Bukarest
9300 Aalst Tel. +39 02 90364-291 Tel. +40 21 2300279
Tel. +32 53 766566 Fax +39 02 90364-838 2300594
Fax +32 53 783977 E-Mail [email protected] Fax +40 21 2314087
E-Mail [email protected] E-Mail: [email protected]

CZECH REPUBLIC JAPAN RUSSIA

TURCK s.r.o. TURCK Japan Corporation TURCK Rus O.O.O.
Hradecká 1151 #202 MBD Bldg. 2F, 3-3-23, Altufyevskoe shosse, 1/7
500 03 Hradec Králové 3 Minami-Aoyama, 127106 Moskau
Tel. +420 495 518 766 Minato-ku, 107-0062, Tokyo, Tel. +7 495 2342661
Fax +420 495 518 767 Japan Fax +7 495 2342665
E-Mail [email protected] Tel. + 81 3 57722820 E-Mail [email protected]
Fax + 81 3 34082571
E-Mail [email protected]

PR OF CHINA KOREA SINGAPORE

TURCK (Tianjin) Sensor Co. Ltd. TURCK Korea Co. Ltd. TURCK Singapore Pte. Ltd.
18,4th Xinghuazhi Road, RIT center Room No 412, 25 International Business Park
Xiqing Economic Gyeonggi Technopark #03-22/23 German Centre
Development Area, Phone +82 (31) 5004555 609916 Singapore
300381 Tianjin Fax +82 (31) 5004558 Tel. +65 65628716
Tel. +86 22 83988-188 E-Mail [email protected] Fax +65 65628719
83988-199 E-Mail [email protected]
Fax +86 22 83988-111
E-Mail [email protected]

FRANCE
TURCK BANNER S.A.S
MEXICO
TURCK Mexico S. DE R.L. DE C.V.
USA
TURCK Inc.
www.turck.com
3, Rue de Courtalin Carr. Saltillo-Zacatecas km 4.5 s/n 3000 Campus Drive
Magny-Le-Hongre Parque Industrial “La Angostura“ Minneapolis, MN 55441-2656
77703 Marne-La-Vallee Cedex 4 Saltillo, COAH. 25070 Tel. +1 763 553-9224
Tel. +33 1 6043-6070 Tel. +52 844 4826-924 553-7300
Fax +33 1 6043-1018 Fax +52 844 4826-926 Fax +1 763 553-0708
E-Mail [email protected] E-Mail [email protected] E-Mail [email protected]

GREAT BRITAIN
TURCK BANNER LIMITED
Blenheim House
Hurricane Way
Wickford, Essex SS11 8YT
Tel. +44 1268 578888
Fax +44 1268 763648 D101599 0110
E-Mail [email protected]

*D101599ßß0110*
... and more than 60 representatives and agencies world-wide. Subject to change without notice