HPE2-T37

Exam Name: Using HPE OneView

Full version: 134 Q&As

Full version of HPE2-T37 Dumps

Share some HPE2-T37 exam dumps below.

1. HOTSPOT
Click the option that will prevent the appliance from sending any email notifications or
forwarding any SNMP traps that are related to the server hardware.
Answer:

Explanation:
Graphical user interface, application
Description automatically generated

2. You want to add the latest IL0 firmware to an HPE OneView firmware repository .
How can you complete this task?
A . A PowerShell script must be used to upload IL0 firmware to the Internal or external firmware
repository.
B . A custom SPP iso Image must be created with the new IL0 firmware version and uploaded
to the repository.
C . An external repository must be created, because standalone components are supported
only In an external repository.
D . ILO firmware can be marked as a hotnx and uploaded directly to the Internal or external
firmware repository.
Answer: B

3. What step must be taken to add an HPE SuperDome Flex to an existing OneView
environment
A . A Rack Management Controller must be added to HPE OneView.
B . HPE Superdome Flex can be added to HPE OneView after at least one nPAR is created.
C . Each HPE Superdome Flex chassis must be added Individually using BMC IP.
D . HPE Superdome Flex complex can be added by adding base chassis of this complex.
Answer: A
4. You want to update the firmware for only two HPE Synergy Virtual Connect SE 32Gb FC
Modules of a large environment.
From which level must this procedure be initiated?
A. Logical Interconnect Group
B. Logical Interconnect
C. Server Profile
D. Logical Enclosure
Answer: B

5. Refer to the exhibit.

A customer complains that firmware compliance is empty. The customer confirmed that Synergy
Service Pack is uploaded to the HPE OneView repository .
How should you respond?
A . The refresh procedure must be performed on each logical enclosure to refresh firmware.
B . All of the components are up to date and compliant with firmware baseline.
C . The firmware repository service must be restarted using maintenance connection.
D . The firmware repository is not defined within firmware compliance report.
Answer: A

6. Your customer has tried to delete a volume using HPE OneView interface, but the operation
has failed.
Which of the following statements would cause the operation to fail?
A. This volume is presented to the server.
B. This volume is marked as permanent.
C. This volume has at least one snapshot created.
D. This volume is rebuilding after the drive failure.
Answer: A
Explanation:
The operation to delete a volume using HPE OneView fails because the volume is presented to
a server. HPE OneView prevents deletion of volumes that are actively assigned to servers to
avoid disrupting operations and data loss. Before deleting the volume, you must unassign it
from any server profiles or disconnect it from the servers.
Option A (Correct): Volumes in use cannot be deleted until they are detached.
Option B: There is no "permanent" flag that prevents deletion.
Option C: Having snapshots may prevent deletion on some storage systems, but HPE OneView
primarily blocks deletion based on active assignments.
Option D: A rebuilding volume might have restrictions, but the primary reason in this context is
active presentation to a server.
Reference: HPE OneView User Guide: Describes the requirements and steps for deleting
volumes, including the need to unassign them first.
HPE OneView Storage Management: Provides information on managing and deleting storage
volumes.

7. Which statement about RoCE network restrictions is true?

A . RoCE networks require Virtual Connect SE 32Gb FC Modules.
B . RoCE networks cannot be configured when Virtual Connect modules are used.
C . RoCE networks are supported only when PVLANs are enabled.
D . RoCE networks are not supported with HPE BladeSystem
Answer: D

8. HOTSPOT
Click option that will allow you to select a FlexNIC function for the specified connection.

Answer:

Explanation:
Graphical user interface
Description automatically generated

9. HOTSPOT
Click the option that must be configured for an HPE OneView when an HPE storage system is
connected directly to an HPE Synergy frame.
Answer:

Explanation:
Fabric Type

10. Which statement about logical JBODs configured using KPE OneView and D3940 Storage
Modules is true?
A . A logical JBOD lifecycle can be associated with a server profile lifecycle and drives can be
securely erased.
B . A logical JBOD cannot be created during server profile creation and must be prepared in
advance
C . Different types of the drives can be used within a logical JBOD as long as they have the
same capacity
D . Logical JBOD functionality must be enabled on the Enclosure Group level by a storage
administrator
Answer: A

11. Which statement regarding HPE GreenLake for Compute Ops Management - OneView
Edition requirements is true?
A. It supports HPE OneView instances from version 8.40 or newer.
B. It can be used tree of charge for the HPE Synergy platform because the licenses are
included.
C. It is available for customers that have more than three HPE Synergy Frames.
D. It supports HPE ProLiant G6 and newer systems regardless of the OS installed.
Answer: B
Explanation:
HPE GreenLake for Compute Ops Management - OneView Edition can be used free of charge
for the HPE Synergy platform because the licenses are included. This means that customers
using HPE Synergy systems receive the benefits of HPE OneView management capabilities
without additional licensing costs.
Option A is incorrect because HPE OneView versions do not align with version 8.40; as of the
knowledge cutoff in 2023, HPE OneView versions are up to 6.x.
Option C is incorrect because the availability of the service is not restricted to customers with
more than three HPE Synergy frames.
Option D is incorrect because HPE ProLiant G6 servers are not supported by HPE OneView;
support
typically begins from Gen8 servers onward.
Reference: HPE OneView Licensing Guide: HPE Synergy includes HPE OneView Advanced
licenses as part of the system purchase.
HPE GreenLake for Compute Ops Management Overview: Indicates that HPE Synergy
customers have integrated licensing for management software.
HPE OneView and HPE Synergy Licensing: Details on included licenses with HPE Synergy
platforms.

12. HOTSPOT
You need to make sure that server ports connected to this network cannot communicate with
each other within the logical interconnect. Click the option within the network definition that will
allow you to configure the required parameter.

Answer:

13. What is the best practice when deploying an HPE OneView appliance?
A . Enable VMware Fault Tolerance if the appliance is deployed to a VMware hypervisor.
B . deploy the appliance in a hypervisor cluster that Is not managed by OneView.
C . Use thin-provisioning for the HPE OneView appliance to save storage capacity.
D . Deploy two HPE OneView appliances and configure them in HA mode.
Answer: B

14. Which components require an HPE OneView license for management?

A . HPE Virtual Connect modules
B . HPE Apollo XL 170r
C . Brocade and Cisco SAN Manager
D . HPE Primera and HPE 3PAR
Answer: A

15. Which location type can be selected when creating a remote schedule backup?
A. SFTP
B. NFS
C. FTP
D. CIFS
Answer: A
Explanation:
When creating a remote scheduled backup in HPE OneView, the supported location type that
can be
selected is SFTP (Secure File Transfer Protocol). SFTP ensures secure transfer of backup files
to a
remote system by encrypting both commands and data, providing a secure method for backing
up
sensitive configuration information.
Reference: The HPE OneView User Guide specifies that SFTP is the supported protocol for
remote scheduled backups, offering secure and encrypted data transfer to remote locations.

16. How can your customer implement HPE OneView so that it can be used to manage an HPE
ProLiant server and HPE BladeSystem?
A . As an application running on the server with Windows system.
B . As a physical appliance based on HPE ProLiant 360 Gen 10.
C . As an application running on the server with CentOS Linux system
D. As a virtual appliance running on the supported hypervisor.
Answer: D
Explanation:
Reference: https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-c03934110
17. What is a network set?
A . It is a collection of all internal networks defined for a specific type of traffic like vSAN or
vMotion.
B . It is a collection of untagged Ethernet networks that form a named group to simplify server
profile creation.
C . It is a collection of tagged Ethernet networks that form a named group to simplify server
profile creation.
D . It is a collection of all networks configured within HPE OneView regardless of network type.
Answer: B

18. Which statement about an HPE OneView server profile is true?

A . A server profile can be created only for HPE BladeSystem, HPE Synergy, and HPE
Superdome Flex servers.
B . A server profile created for a specific server hardware type cannot be moved to a server with
a different server hardware type.
C . A server profile can be used to configure a local storage controller, but cannot be used to
configure SAN-based storage.
D . A server profile can be used to update firmware and drivers when the operating system on
the server is up and running.
Answer: B

19. Your customer wants to know what will happen If a server is positioned in maintenance
mode using HPE Oneview.
How should you respond?
A. This mode will suppress unwanted emails and activity alerts for routine server maintenance.
B. This mode will temporarily remove server profiles from the server for the maintenance period.
C. This mode will disable all network and storage connections during the maintenance period.
D. This mode will position the server in an isolated network to allow hardware or software
maintenance.
Answer: A
Explanation:
When a server is placed in maintenance mode using HPE OneView, it will suppress unwanted
emails and activity alerts for routine server maintenance. This mode is designed to prevent alert
storms and unnecessary notifications during planned maintenance activities.
Option A (Correct): Maintenance mode suppresses alerts and notifications for the specified
server.
Option B: Server profiles remain assigned; they are not removed during maintenance mode.
Option C: Network and storage connections are not disabled; the server's connectivity remains
unchanged unless manually adjusted.
Option D: The server is not repositioned into an isolated network automatically.
Reference: HPE OneView User Guide: Describes the maintenance mode feature and its impact
on alerting (see "Placing a server in maintenance mode").
Managing Server Maintenance in HPE OneView: Explains how maintenance mode affects
server monitoring and alerts.

20. Refer to the exhibit.

After adding SAN Manager to HPE OneView. you noticed that all SANs are in the discovered
state .
How will this affect HPE OneView storage management capabilities?
A . Snapshot functionality will be limited only to the volumes not using these SANs.
B . Volume presentation through server profile will work with the discovered state.
C . Auto-zoning functionality will not work until SANs are associated with networks.
D . Volume provisioning will only work for arrays that ate accessible through these SANs.
Answer: C

21. Refer to the exhibit.

Your customer created multiple networks in HPE OneView, but only Eth-1 is available to be
used within a server profile .
What is a likely cause of this situation?
A . The other networks are not configured with the required Smart Link parameter.
B . The other networks are not added to the Logical Interconnect Group configuration.
C . The other networks have Private Network' selected, which hides them from
ComputeModules.
D . The other networks are configured with a purpose other than General or Management.
Answer: B
 More Hot Exams are available.

350-401 ENCOR Exam Dumps

350-801 CLCOR Exam Dumps

200-301 CCNA Exam Dumps

Powered by TCPDF (www.tcpdf.org)