Hydrant Valve

HORIZONTAL BIB NOSE

VALVE VALVE

Model Inlet Size Outlet Model Inlet Size Outlet

HV001 2 1/2” (65mm) BSPT Male 2 1/2” Female HV002 2 1/2” (65mm) BSPT Male 2 1/2” Female
HV001(F) 2 1/2” (65mm) PN16 to BS4504 inst. to BS 336 HV002(F) 2 1/2” (65mm) PN16 to BS4504 inst. to BS 336

RIGHT Oblique
ANGLE Landing
VALVE Valve
Model Inlet Size Outlet Model Inlet Size Outlet

VALVES FOR WET &

HV003 2 1/2” (65mm) BSPT Male 2 1/2” Female HV005 2 1/2” (65mm) BSPT Male 2 1/2” Female
HV003(F) 2 1/2” (65mm) PN16 to BS4504 inst. to BS 336 HV005(F) 2 1/2” (65mm) PN16 to BS4504 inst. to BS 336

DRY RISER SYSTEM

OBLIQUE PRESSURE HYDRANT BALL VALVE
REDUCING VALVE WITH LOCKING DEVICE
8

Kolling manufactures low and high-pressure hydrant valves; consist of various type such as horizontal, Model Inlet Size Outlet Model Inlet Size Outlet
bib nose, oblique, right angle and etc. All valves are manufacture to BS 5041: Pt. 1 and Pt. 2. HV006 2 1/2” (65mm) BSPT Male 2 1/2” Female HV014 NPT Male NH 7.5 Female
HV006(F) 2 1/2” (65mm) PN16 to BS4504 inst. to BS 336 HV014(F) 2 1/2” ANSI 150 F.F Swivel
GENERAL SPECIFICATIONS
Body : Copper Alloy to BS 1400
Hand Wheel : Aluminum Alloy to BS 1490
Inlet : Screw End/Flanged End
Outlet : Female Instantaneous to BS336, ANSI NH-7.5,Round Thread to BS336, Storz and
Other International Outlet Fittings Are Available On Request. DRY RISER GATE Hose Rack Right
SPECIFICATION FOR LOW PRESSURE VALVE SPECIFICATION FOR HIGH PRESSURE VALVE VALVE Angle Valve
Working Pressure : 15 Bar (217 psi) Working Pressure : 20 Bar (290 psi)
Seat Test Pressure : 16.5 Bar (239 psi) Seat Test Pressure : 22 Bar (319 psi)
Body Test : 22.5 bar (326 psi) Body Test : 30 Bar (435 psi)
Model Inlet Size Model Inlet Size
HV018 2 1/2” (65mm) male BSPT HV019-38 1 1/2” (38mm) Male BSPT
HV018(F) 2 1/2” (65mm) PN16 to BS4504 HV019-65 2 1/2” (65mm) Male BSPT

OBLIQUE LANDING OBLIQUE LANDING

VALVE WITH STORZ VALVE WITH NHT
OUTLET OUTLET

Model Inlet Size Model Inlet Size Outlet

HV020 2 1/2” (65mm) Male BSPT HV016 2 1/2” (65mm) BSPT Male
NH 7.5 Male
HV020(F) 2 1/2” (65mm) PN16 to BS4504 HV016(F) 2 1/2” ANSI 150 F.F

Due to our continuous research and development for product improvement specifications subject to change without prior notice
 Hydrant Valve Hydrant Valve

VALVES FOR WET & DRY

HOSE CRADLE
Kolling Flat Hose Cradle is suitable for the storage of one length of 2

RISER SYSTEM
1/2” meters lay flat fire hose and is install next to the fire hydrant for
wet or dry riser system.
Option: 2 x 2 1/2” x 30 meters hose are available.

GENERAL SPECIFICATIONS
Body : Mild Steel, RED EPE Powder Coated
SELF REGULATING VALVE Bracket : Aluminum Alloy
Type : Swing 180 Deg.
Model Inlet Size Code : ME607S or ME607D ME607D ME607S
HV007-S 2 1/2” (65mm) BSPT Male
HV007(F) 2 1/2” (65mm) PN16 to
BS4504
HOSE RACK ASSEMBLY
Kolling Self Regulating Valve are designed and constructed to conform fully to BS5041 : Pt 1 1987 which does not require a
return pipe. Valve shall be of the rising stem inside screw type having the actuating thread within the bonnet. The hand wheel Kolling Hose Rack assembly is install in building next to fire hydrant valve for wet and dry riser system. There are two type of
have a minimum clearance of 40mm between any parts of the valve vertically below. The valve body is able to withstand a hydrostatic hose rack assembly, one is mounted on the wall by bracket and another is by fixing it on a right angle valve. Once the Nozzle
pressure of 30 bars and the seat for 22 bars. The flow rate is 8.5 +/- 0.5 L/Second at inlet pressure of 7.5 bars and up to 20 and the Hose are fully pull out, an automatic release mechanism will enable water to discharge.
bars. The mechanism for outlet pressure adjustment is fitted with a locking/clamping device to maintain the initial setting. GENERAL SPECIFICATIONS
Valve shall complied to all the operational requirements of the standards without alteration of initial setting. (e.g Inlet pressure from 5 bars Body : Mild Steel for 1 1/2” or 2 1/2” Hose
up to 20bars but outlet pressure shall remain at a constant pressure without further adjustment). Material for valve shall be LG2
or LG4 gunmetal for body and copper alloy for bonnet and stem. Bracket : Mild Steel, RED EPE Powder Coated
Hose : Lay Flat Hose 1 1/2” or 2 1/2”
Nozzle : 1 1/2” or 2 1/2” Connection
AIR RELEASE VALVE SLUICE VALVE Valve Connection : BS Instantaneous or NHT
Code : ME 608
Model Inlet Size Model Inlet Size
HV009-19 3/4” (19mm) BSPT Male HV011-100 4” (100mm) PN16 to BS4504
9 HV009-25 1” (25mm) BSPT Male HV011-150 6” (150mm) PN16 to BS4504 10

RIGHT ANGLE VALVE

Model Inlet Size Outlet
HV017 2 1/2” (65mm) BSPT Male 2 1/2” Round
Thread to BS 336

WET & DRY RISER

WET & DRY RISER EQUIPMENT
Kolling 2 way and 4 way Inlet Breeching are manufactured to BS 5041: Pt. 3. Landing valve
boxes for dry risers are manufactured to BS 5041 Pt. 4. Foam inlet and dry riser boxes are
manufactured to BS 5041: Pt. 5.

GENERAL SPECIFICATIONS
DC707-S
Two way & Four way Inlet Breeching
Body Material : Spheroidal Graphite Iron to BS 2789
Inlet : 65mm Male Instantaneous to BS 336, Copper Alloy to BS 1400
Outlet – 2 Way Breeching : 100mm PN16 to BS4504 / 4” ANSI Class 150 F.F
4 Way Breeching : 150mm PN16 to BS 4504 / 6” ANSI Class 150 F.F
Working Pressure : 10 Bar (145 psi)
Test Pressure : 20 bar (290 psi) DC 708-S

Due to our continuous research and development for product improvement specifications subject to change without prior notice
 Data Sheet 10.32
Issue B
2 & 4 Way Breeching Inlet Valves
Fig. DC707 / DC708

General Description
Rapidrop Fig. DC 707/DC 708 breeching inlet valves are suitable for
vertical and horizontal installation on dry risers.
Valves are manufactured to comply with BS 5041-3, comprise
of flanged outlet connection and 2 or 4 instantaneous inlet
connections.
Inlet connections are made of LG2 Gunmetal and are fitted with
non-return valves. Breeching inlet valves are maintenance free and
all components are corrosion resistant or coated with a thermally
applied fusion-bonded epoxy. Valves are equipped with a 25mm
drain with blanking cap and a chain.

Working Pressure
Max. working pressure 10 bar (145 psi)
Max. test pressure 20 bar (290 psi)

Connections
Inlet
DN65 (2 1/2”) male instantaneous hose connections as per BS 336
- DC 707 2-way inlet
- DC 708 4-way inlet
Outlet
PN16 or ANSI Class 125/150 flanged connection.
- DC 707 DN100 (4”)
- DC 708 DN150 (6”)
Material Specification
Description Materials

Standards Body Ductile Iron BS2789

BS 5041-3 Inlet LG2 Gunmetal BS1400
BS 336
Stem Brass CZ121

Approvals Disk Brass CZ122

BSI Kitemark Plug Plastic

Drain Valve Copper Alloy

Important Installation Information

• Rapidrop products must only be installed by a competent person in accordance with requirements of the local authority having jurisdiction.
Deviations from these standards will invalidate warranty.
• It is the responsibility of the installing contractor to include a copy of this document in the sprinkler system installation, operating and
maintenance manual.
• Alterations to Rapidrop products will void any warranty.
• Rapidrop products should be inspected and maintained during routine sprinkler system inspections by a competent person in accordance
with national codes/requirements.
• Failure to follow these instructions could cause improper operation, resulting in personal injury and/or property damage.
• For further details and technical support please contact your Rapidrop sales representative.

DS: 10.32 Rapidrop Global Ltd

Issue B T: +44 (0) 1733 847 510 F: +44 (0) 1733 553 958
15/02/18 e: [email protected]
© 2018 Rapidrop w: www.rapidrop.com Page 1 of 1

Rapidrop Global Ltd reserves the right to change the design, materials and specifications without notice to continue product development