certsinside 220-1101 CompTIA A+ Certification Exam Core 1 VERIFIED QUESTIONS ANSWERS BY Aguirre 29-01-2024 9QA -

Page 1

Free Questions for 220-1101

Shared by Aguirre on 29-01-2024
For More Free Questions and Preparation Resources

Check the Links on Last Page

 certsinside 220-1101 CompTIA A+ Certification Exam Core 1 VERIFIED QUESTIONS ANSWERS BY Aguirre 29-01-2024 9QA -
Page 2

Question 1
Question Type: MultipleChoice

An engineer discovers the reason a user is unable to access the internet on a company laptop is
because the RJ45 port failed. Which of the following should the engineer do to immediately
restore network connectivity?

Options:
A- Update the Ethernet driver.
B- Connect to the WAP.
C- Replace the NIC.
D- Resolder the network connector.

Answer:
B

Question 2
Question Type: MultipleChoice

A technician recently reinstalled a previously virtualized application directly to a user's computer.

Now, the application is not launching. Which of the following did the technician most likely do to
cause this issue?

Options:
A- Installed the software on the base operating system.
B- Installed the wrong license type.
C- Installed the application with administrator rights.
D- Reset the user's application virtualization session.

Answer:
A

Explanation:
 certsinside 220-1101 CompTIA A+ Certification Exam Core 1 VERIFIED QUESTIONS ANSWERS BY Aguirre 29-01-2024 9QA -
Page 3
If an application was previously running in a virtualized environment and is not launching after
being installed directly on the base operating system, it's possible that the technician did not
account for dependencies or configurations specific to the virtualized environment that are not
present or are incompatible with the base operating system. This mismatch can prevent the
application from launching properly.

CompTIA A+ Core 1 Exam Objectives Section 4.0: Virtualization and Cloud Computing

CompTIA A+ Core 1 Exam Objectives Section 5.0: Hardware and Network Troubleshooting

Question 3
Question Type: MultipleChoice

A company issued smartphones to users who work from home. The devices are enrolled and
configured within the company's MDM, and hardening profiles were deployed to each device for
greater security. Which of the following services best enhances security for remote users
accessing company resources? (Select two).

Options:
A- Two-factor authentication
B- Managed corporate applications
C- Cloud data synchronization
D- Automated device setup
E- GPS location tracking
F- PIN code enforcement

Answer:
A, F

Explanation:
Two-factor authentication (2FA) significantly enhances security by requiring two forms of
verification before granting access to company resources, making it harder for unauthorized
users to gain access even if they have one of the credentials. PIN code enforcement adds an
additional layer of security by ensuring that devices are protected by a PIN, making physical
access to the device more challenging for unauthorized users. While the other options provide
various benefits, 2FA and PIN code enforcement directly enhance the security of remote users
accessing company resources.
 certsinside 220-1101 CompTIA A+ Certification Exam Core 1 VERIFIED QUESTIONS ANSWERS BY Aguirre 29-01-2024 9QA -
Page 4
CompTIA A+ Core 1 Exam Objectives Section 2.7: Compare and contrast Internet connection
types, network types, and their features.

Question 4
Question Type: MultipleChoice

A technician is setting up a projector for a videoconferencing system. The laptop that the
technician is using is set to the correct resolution. The projector is receiving a signal, but the
image is distorted. Which of the following most likely explains the issue?

Options:
A- The projector's aspect ratio is set incorrectly.
B- The laptop's video card has failed.
C- The projector's bulb is burned out.
D- The display brightness needs to be adjusted.

Answer:
A

Explanation:
The most likely explanation for the distorted image on the projector is that the projector's aspect
ratio is set incorrectly. The aspect ratio is the ratio of the width to the height of the image, and it
affects how the image is displayed on the screen. If the aspect ratio of the projector does not
match the aspect ratio of the laptop, the image may appear stretched, squashed, cropped, or
letterboxed.

To fix the distorted image, the technician should follow these steps:

Check the aspect ratio of the laptop and the projector. The aspect ratio of the laptop can be
found in the display settings of the operating system, such as Windows or Mac OS. The aspect
ratio of the projector can be found in the user manual or the on-screen menu of the projector.
Common aspect ratios are 4:3, 16:9, and 16:10.

Adjust the aspect ratio of the projector to match the aspect ratio of the laptop. The technician
can use the remote control or the buttons on the projector to access the on-screen menu and
select the appropriate aspect ratio option. Some projectors may have a dedicated aspect ratio
button on the remote control or the projector itself.

Verify that the image is displayed correctly on the screen. The technician can use the zoom,
 certsinside 220-1101 CompTIA A+ Certification Exam Core 1 VERIFIED QUESTIONS ANSWERS BY Aguirre 29-01-2024 9QA -
Page 5
focus, or keystone buttons on the projector or the remote control to fine-tune the image quality
and alignment.

How to Fix Projector Display Problems - Projectors Tab1

Correcting Distorted Projector Images - Projector Repair World Hyd2

How to Adjust the Aspect Ratio on a Projector - Lifewire

Question 5
Question Type: MultipleChoice

Which of the following protocols is the most appropriate to use for inventory tracking in a small
warehouse?

Options:
A- Near-field communication
B- Radio-frequency identification
C- Bluetooth
D- 802.11

Answer:
B

Explanation:
Radio-frequency identification (RFID) is the most appropriate protocol to use for inventory
tracking in a small warehouse. RFID is a technology that uses radio waves to identify and track
objects that have RFID tags attached to them. RFID tags are small devices that store information
about the object, such as its name, serial number, location, or status. RFID tags can be passive,
which means they do not have a battery and rely on the radio signal from the reader to power
them, or active, which means they have a battery and can transmit their own signal. RFID
readers are devices that can scan the RFID tags and read the information stored on them.

RFID is suitable for inventory tracking in a small warehouse because it can provide several
benefits, such as:

Faster and more accurate scanning: RFID tags can be scanned without direct line of sight, unlike
barcodes, and can be scanned in bulk, unlike QR codes. This means that RFID readers can scan
 certsinside 220-1101 CompTIA A+ Certification Exam Core 1 VERIFIED QUESTIONS ANSWERS BY Aguirre 29-01-2024 9QA -
Page 6
multiple items at once, even if they are inside boxes or containers, and reduce the time and
errors involved in manual scanning.

Real-time visibility and control: RFID tags can be updated with the latest information about the
inventory, such as its location, quantity, or condition. This means that RFID readers can provide
real-time data and feedback on the inventory status, such as its availability, movement, or
expiration. This can help improve inventory management, optimize warehouse space, and
prevent stockouts or overstocking.

Enhanced security and quality: RFID tags can be encrypted and authenticated, unlike barcodes or
QR codes, which can be easily copied or tampered with. This means that RFID tags can prevent
unauthorized access or theft of the inventory, and ensure its authenticity and quality. This can
help protect the inventory from damage, loss, or fraud, and increase customer satisfaction and
trust.

Inventory Tracking Simplified: Steps, Methods and Efficiency Tips1

17 Essential Inventory Management Techniques -- Forbes Advisor2

Inventory Tracking vs Inventory Traceability - Kardex3

Question 6
Question Type: MultipleChoice

A technician is setting up storage in a server that only has SAS connectors for storage. The
technician wants the server to utilize RAID 10 for increased performance. Which of the following
storage types should the technician install?

Options:
A- NVMe M.2
B- Mechanical
C- mSATA
D- Optical

Answer:
B

Explanation:
 certsinside 220-1101 CompTIA A+ Certification Exam Core 1 VERIFIED QUESTIONS ANSWERS BY Aguirre 29-01-2024 9QA -
Page 7
SAS stands for Serial Attached SCSI, which is a type of interface that connects storage devices to
servers or workstations.SAS supports both mechanical hard disk drives (HDDs) and solid state
drives (SSDs), but not other types of storage devices, such as NVMe M.2, mSATA, or optical
drives12.

RAID stands for Redundant Array of Independent Disks, which is a method of combining multiple
storage devices into a logical unit that provides improved performance, reliability, or both.RAID
10 is a combination of RAID 1 (mirroring) and RAID 0 (striping), which means that data is written
across two or more striped sets of mirrored drives34.

Therefore, the only type of storage device that the technician can install in a server that only has
SAS connectors and wants to use RAID 10 is mechanical HDDs. Mechanical HDDs use spinning
platters and moving heads to store and access data, and they are usually cheaper and have
larger capacities than SSDs, but they are also slower and more prone to failure .

CompTIA A+ Core 1 (220-1101) Certification Study Guide, Chapter 3: Hardware, Section 3.3:
Storage Devices, Page 131

CompTIA A+ Core 1 (220-1101) and Core 2 (220-1102) Exam Cram, Chapter 3: Storage, Section
3.2: Storage Interfaces, Page 97

CompTIA A+ Core 1 (220-1101) Certification Study Guide, Chapter 3: Hardware, Section 3.4:
RAID, Page 143

CompTIA A+ Core 1 (220-1101) and Core 2 (220-1102) Exam Cram, Chapter 3: Storage, Section
3.4: RAID, Page 104

CompTIA A+ Core 1 (220-1101) Certification Study Guide, Chapter 3: Hardware, Section 3.3:
Storage Devices, Page 129

CompTIA A+ Core 1 (220-1101) and Core 2 (220-1102) Exam Cram, Chapter 3: Storage, Section
3.3: Hard Disk Drives, Page 99

Question 7
Question Type: MultipleChoice

A technician is troubleshooting a laptop that sometimes fails to charge. The technician has
already tested the power adapter and determined the connection is good. Which of the following
is the most likely cause of the issue?

Options:
A- Defective DC jack
 certsinside 220-1101 CompTIA A+ Certification Exam Core 1 VERIFIED QUESTIONS ANSWERS BY Aguirre 29-01-2024 9QA -
Page 8
B- Failing cooling fan
C- Bad memory
D- Overheating CPU

Answer:
A

Explanation:
When a laptop sometimes fails to charge despite a good power adapter connection, the most
likely issue is a defective DC jack. The DC jack, where the power adapter plugs into the laptop,
can become loose or damaged over time, leading to intermittent or failed charging. Cooling fan
issues, bad memory, or an overheating CPU would typically lead to different symptoms such as
overheating, system crashes, or performance issues, not charging problems.

CompTIA A+ Core 1 Exam Objectives Section 3.0: Hardware

Question 8
Question Type: MultipleChoice

A technician is replacing the power supply in a computer. Which of the following safety measures
should the technician take to protect the computer?

Options:
A- Wear an antistatic wrist strap.
B- Wear protective eyewear.
C- Wear gloves.
D- Minimize the use of tools.

Answer:
A

Explanation:
When replacing a power supply in a computer, wearing an antistatic wrist strap is crucial to
prevent static electricity from damaging the computer components. Static electricity can easily
 certsinside 220-1101 CompTIA A+ Certification Exam Core 1 VERIFIED QUESTIONS ANSWERS BY Aguirre 29-01-2024 9QA -
Page 9
damage sensitive electronic components within the computer; therefore, using an antistatic wrist
strap helps to ground the technician, mitigating the risk of electrostatic discharge. The other
options provide general safety but do not address the primary concern of electrostatic discharge
in this context.

Reference: CompTIA A+ Core 1 (220-1101) objectives covering best practices for hardware
maintenance, including electrostatic discharge prevention.

Question 9
Question Type: MultipleChoice

Which of the following is the best way to protect the data of a virtual machine in the event of
hardware failure?

Options:
A- Redundant hardware
B- UPS
C- Cloud-based backup
D- RAID

Answer:
C

Explanation:
The best way to protect the data of a virtual machine in the event of hardware failure is to use a
cloud-based backup solution. A cloud-based backup solution is a service that copies and stores
the data of a virtual machine to a remote server or storage device over the internet. A cloud-
based backup solution can offer several benefits, such as:

High availability and reliability: A cloud-based backup solution can ensure that the data of a
virtual machine is always accessible and recoverable, even if the hardware that hosts the virtual
machine fails or is damaged. A cloud-based backup solution can also provide redundancy and
fault tolerance, by replicating the data across multiple locations or regions.

Scalability and flexibility: A cloud-based backup solution can adapt to the changing needs and
demands of the virtual machine, by allowing the user to adjust the backup frequency, retention
period, and storage capacity. A cloud-based backup solution can also support different types of
backup, such as full, incremental, or differential, depending on the user's preferences and
certsinside 220-1101 CompTIA A+ Certification Exam Core 1 VERIFIED QUESTIONS ANSWERS BY Aguirre 29-01-2024 9QA -
Page 10
requirements.

Cost-effectiveness and simplicity: A cloud-based backup solution can reduce the cost and
complexity of maintaining a backup infrastructure, by eliminating the need to purchase, install, or
manage hardware, software, or licenses. A cloud-based backup solution can also automate and
streamline the backup process, by providing easy-to-use tools and interfaces, such as web
portals, APIs, or scripts.

Other options, such as redundant hardware, UPS, or RAID, may improve the performance or
resilience of the hardware that hosts the virtual machine, but they do not provide a complete
protection for the data of the virtual machine in the event of hardware failure. Redundant
hardware is a technique that uses multiple components or devices to perform the same function,
so that if one fails, another can take over. UPS (uninterruptible power supply) is a device that
provides backup power to a system in case of a power outage or surge. RAID (redundant array of
independent disks) is a technology that combines multiple disks into a logical unit, to improve the
speed, capacity, or reliability of the storage. However, these options may not prevent data loss or
corruption due to other causes, such as human error, malware, or natural disasters. Therefore, a
cloud-based backup solution is the best way to protect the data of a virtual machine in the event
of hardware failure.

What is Cloud Backup?| Microsoft Azure1

Cloud Backup - What is it and how does it work?| Veeam2

Cloud Backup vs.Local Backup: Which Option is Right for You?3

certsinside 220-1101 CompTIA A+ Certification Exam Core 1 VERIFIED QUESTIONS ANSWERS BY Aguirre 29-01-2024 9QA -
Page 11

To Get Premium Files for 220-1101 Visit

https://www.p2pexams.com/products/220-1101

For More Free Questions Visit

https://www.p2pexams.com/comptia/pdf/220-1101