ROMANIAN ACADEMY OF TECHNICAL SCIENCES

THE GENERAL ASSOCIATION OF THE ENGINEERS IN ROMANIA

“CONSTANTIN BRÂNCUȘI” UNIVERSITY OF TÂRGU JIU

FACULTY OF ENGINEERING

PROGRAM

NATIONAL SCIENTIFIC CONFERENCE

WITH INTERNATIONAL PARTICIPATION

“CONFERENG 2024”
th
November 29 - 30th 2024

TÂRGU–JIU

ROMANIA
2
 HONORARY COMMITTEE

▪ Professor PhD Mihai MIHĂIŢĂ, President of the Romanian Academy of Technical

Sciences
▪ Professor PhD Florin TĂNĂSESCU, University of Bucharest, Romania, Vice-president of
the Romanian Academy of Technical Sciences
▪ Professor PhD Valentin NĂVRĂPESCU, University of Bucharest, Romania, Vice-
president of the Romanian Agency for Quality Assurance in Higher Education
▪ Professor PhD Luminiţa-Georgeta POPESCU, Rector of "Constantin Brâncuşi" University

SCIENTIFIC COMMITTEE
President: Prof. PhD Roxana Gabriela POPA, University "Constantin Brâncuşi" of Târgu-Jiu / Dean
of Faculty of Engineering
Members:
• Professor PhD István BÍRÓ University of Szeged, Hungary
• Professor PhD Ivan MILEV, Mining and Geology University Sofia, Bulgaria
• Professor PhD Milan RACKOV University of Novi Sad, Serbia
• Professor PhD Josef TIMMERBERG, Jade University, Wilhelmshaven, Germany
• Professor PhD Paun ANTONESCU, National University of Science and Technology
POLITEHNICA Bucharest
• Professor PhD Ilare BORDEASU, Polytechnic University of Timişoara
• Professor PhD Gilbert Rainer GILLICH, Babeş-Bolyai University of Cluj-Napoca,
corresponding member of the Romanian Academy of Technical Sciences
• Professor PhD Vasile PĂDUREANU, Transylvania University of Braşov
• Professor PhD Elena SCUTELNICU, "Dunărea de Jos" University of Galaţi
• Assoc. prof. PhD Radostin DIMITROV, Technical University of Varna, Bulgaria
• Assoc. prof. PhD Zlateva PENKA, Technical University of Varna, Bulgaria
• Assoc. prof. PhD Georgi Tsonev VELEV, Technical University of Gabrovo, Bulgaria
• Professor PhD Mircea MIHALACHE, USAMV Bucureşti
• PhD Athanasios TILIAKOS, National Research and Development Institute for Cryogenic and
Isotopic Technologies (ICSI Rm. Vâlcea)
• Professor PhD Tiberiu IANCU, University of Life Sciences ''King Mihai I'' Timișoara
• Professor PhD Corina BÎRLEANU, Technical University Cluj-Napoca
• Professor PhD Diana ANDONE, Polytechnic University of Timişoara
• Professor PhD Jean-Vasile ANDREI, Petroleum-Gas University of Ploiesti
• Professor PhD Dan Florin NIȚOI, National University of Science and Technology
POLITEHNICA Bucharest

3
• Professor PhD Augustin SEMENESCU, National University of Science and Technology
POLITEHNICA Bucharest
• Professor PhD Oana-Roxana CHIVU, National University of Science and Technology
POLITEHNICA Bucharest
• Professor PhD Aurel-Liviu OLARU, University of Craiova
• Professor PhD Nicu George BÎZDOACĂ, University of Craiova
• Professor PhD Cosmin IONETE, University of Craiova
• Professor PhD Liviu Marius CÎRTINĂ, "Constantin Brancuşi" University of Târgu-Jiu
• Professor PhD Daniela CÎRTINĂ, "Constantin Brâncuşi" University of Târgu-Jiu
• Professor PhD Mihai CRUCERU, "Constantin Brâncuşi" University of Târgu-Jiu
• Professor PhD Ştefan GHIMIŞI, "Constantin Brâncuşi" University of Târgu-Jiu
• Professor PhD Cristinel RACOCEANU, "Constantin Brâncuşi" University of Târgu-Jiu
• Professor PhD Dan DOBROTĂ, University "Lucian Blaga" of Sibiu
• Professor PhD Nicoleta GILLICH, Babeş-Bolyai University of Cluj-Napoca
• Professor PhD Codruţa-Oana HAMAT, Babeş-Bolyai University of Cluj-Napoca
• Professor PhD Eugen RĂDUCA, Babeş-Bolyai University of Cluj-Napoca
• Assoc. prof. PhD Virgil STOICA, Polytechnic University of Timişoara
• Assoc. prof. PhD Ion-Marian POPESCU, University of Craiova
• Assoc. prof. PhD Olivia Doina NEGOIȚĂ, National University of Science and Technology
POLITEHNICA Bucharest
• Assoc. prof. PhD Ilie UȚU, University of Petroşani
• Assoc. prof. PhD Zoltan Iosif KORKA, Babeş-Bolyai University of Cluj-Napoca
• Assoc. prof. PhD Ilie BORCOŞI, "Constantin Brâncuşi" University of Târgu-Jiu
• Assoc. prof. PhD Mădălina BUNECI, "Constantin Brâncuşi" University of Târgu-Jiu
• Assoc. prof. PhD Bogdan DIACONU, "Constantin Brâncuşi" University of Târgu-Jiu
• Assoc. prof. PhD Florin GROFU, "Constantin Brâncuşi" University of Târgu-Jiu
• Assoc. prof. PhD Cristinel POPESCU, University "Constantin Brâncuşi" of Târgu-Jiu
• Assoc. prof. PhD Viorica Mariela UNGUREANU, "Constantin Brâncuşi" University of
Târgu-Jiu
• Assoc. prof. PhD Remus DOBRA, "1 Decembrie 1918" University of Alba Iulia
• Assoc. prof. PhD Mircea RISTEIU, "1 Decembrie 1918" University of Alba Iulia
• Assoc. prof. PhD Dragoş PĂSCULESCU, University of Petrosani
• Assoc. prof. PhD Cornel HAŢIEGAN, Babeş-Bolyai University of Cluj-Napoca
• Lecturer PhD Alin NIOAŢĂ, "Constantin Brâncuşi" University of Târgu-Jiu

4
 ORGANIZING COMMITTEE

President:
▪ Prof. PhD Roxana Gabriela POPA
Secretary:
▪ Assoc. prof. PhD Florin GROFU
Members:
▪ Professor PhD Mihai CRUCERU
▪ Professor PhD Liviu Marius CÎRŢÎNĂ
▪ Professor PhD Gabriel Cătălin IANCU
▪ Professor PhD Sorinel Ștefan GHIMIŞI
▪ Professor PhD Cristinel RACOCEANU
▪ Assoc. prof. PhD Mădălina Roxana BUNECI
▪ Assoc. prof. PhD Minodora Maria PASĂRE
▪ Assoc. prof. PhD Adina TĂTAR
▪ Assoc. prof. PhD Maria Nicoleta MIHUȚ
▪ Assoc. prof. PhD Viorica Mariela UNGUREANU
▪ Assoc. prof. PhD Cristinel POPESCU
▪ Assoc. prof. PhD Ilie BORCOŞI
▪ Assoc. prof. PhD Bogdan Marian DIACONU
▪ Assoc. prof. PhD Iuliana Carmen Bărbăcioru
▪ Lecturer PhD Lucica ANGHELESCU
▪ Lecturer PhD Gheorghe GÎLCĂ
▪ Lecturer PhD Ramona Violeta CAZALBAȘU
▪ Lecturer PhD Adrian RUNCEANU
▪ Lecturer PhD Cristina Felicia IONICI
▪ Lecturer PhD Alin NIOAŢĂ
▪ Lecturer PhD Alin STĂNCIOIU
▪ Lecturer PhD Irina Ramona PECINGINĂ
▪ Lecturer PhD Emil Cătălin ŞCHIOPU
▪ Lecturer PhD Adriana COMARLĂ
▪ Lecturer PhD Marian IONESCU
▪ Lecturer PhD Constanța RADULESCU
▪ Lecturer PhD Aurora Cătălina IANĂȘI
▪ Lecturer PhD Cătălin CHIMEREL
▪ Assist. Ph.D. student Elena Loredana STĂNCIOIU
▪ Assist. Ph.D. student Alina Elena LUPULESCU

5
 CONFERENCE SCHEDULE

Friday, November 29th, 2024

800 - 1000 - Registration

1000 - 1100 - Opening ceremony
- Plenary lecture
1100 – 1130 - Coffee break
1130 - 1400 - Conference sessions
1400 - 1500 - Lunch
1500 - 1800 - Conference sessions
1900 - Dinner

THE SECTIONS OF THE CONFERENCE

1. Control system, electronics, information technology and cyber security

2. Food, agriculture and rural development
3. Energy and environment
4. Mechanical engineering, Materials and manufacturing system, Quality management

Saturday, November 30th, 2024

09.00 - 10.00: Visit in research laboratories of the faculty

11.00 - 18.00: Program for visiting the touristic objectives and sites in Târgu Jiu

6
 Section 1

Control system, electronics, information technology and cyber

security

Conference room: A015

Date 29. 11. 2024
Hours: 1100 – 1400
Chairman: Assoc. prof. PhD. Florin Grofu, “Constantin Brâncuși” University from
Târgu Jiu
Technical secretariat: Assistant PhD Stud. Eng. Lupulescu (Machidon) Alina-
Elena, “Constantin Brâncuși” University from Târgu Jiu

1. VIRTUAL CLASSROOM LEARNING FACILITATOR: AN EFFECTIVE

TEACHER-STUDENT RELATIONSHIP IN THE ONLINE
ENVIRONMENT
Cornelia Victoria ANGHEL-DRUGĂRIN, Lect.PhD Engineer, Babes-Bolyai
University, Cluj-Napoca, ROMANIA
Codruta Oana HAMAT(corresponding author), Prof.Dr.Eng. Babes-Bolyai
University, Cluj-Napoca, ROMANIA
Nicoleta MIREA, Research Eng. Politehnica University, Research Centre for
Engineering and Management, Timisoara, ROMANIA
2. TEACHERS' PERCEPTIONS OF ONLINE EDUCATION FROM
ROMANIA VERSUS EUROPE DURING 2020-2024: A CASE STUDY
Cornelia Victoria ANGHEL-DRUGĂRIN, Lect.PhD Engineer, Babes-Bolyai
University, Cluj-Napoca, ROMANIA
Codruta Oana HAMAT(corresponding author), Prof.Dr.Eng. Babes-Bolyai
University, Cluj-Napoca, ROMANIA
Nicoleta MIREA, Research Eng. Politehnica University, Research Centre for
Engineering and Management, Timisoara, ROMANIA
3. SYSTEM FOR MONITORING AND REGULATING THE
TEMPERATURE OF CYLINDERS IN A CALENDERING PLANT
Grofu Florin, Assoc. Prof. PhD Eng„Constantin Brâncuși” University from
Târgu Jiu, ROMANIA

7
4. OPTIMIZING ENERGY CONSUMPTION IN SMART HOMES WITH
IoT AND HOME ASSISTANT
Dan Cristian LAZĂR1, Dan Codrut PETRILEAN1, Ilie UTU1, Adina TĂTAR2,
Dragos PASCULESCU1, Teodora LAZĂR1
1
University of Petrosani, Faculty of Mechanical and Electrical Engineering,
ROMÂNIA
2
Constantin Brancusi University of Targu-Jiu, Faculty of Engineering,
ROMÂNIA
5. DESIGNING AND CREATING A BRIGHT ADVERTISEMENT
Mihaela Molnar,Babeș-Bolyai University of Cluj-Napoca,ROMÂNIA
Ana-Maria Budai*,Babeș-Bolyai University of Cluj-Napoca, ROMÂNIA
Eugen Răduca,Babeș-Bolyai University of Cluj-Napoca,ROMÂNIA
Marcel Burduniuc, Technical University of Moldova, Chisinau, Republic of
Moldova

6. MAXIMIZING ENERGY EFFICIENCY IN HVAC SYSTEMS USING AI-

ENHANCED CONTROL MODELS
Cașotă (Ghicajanu) Maria-Isabela, PhD Stud. Eng., University of Petroșani,
ROMANIA
PETRILEAN Dan Codruț, University of Petroșani, ROMANIA
7. ROMANIAN ELECTRONIC COMPONENTS IN THE MUSEUM OF THE
FACULTY OF ENGINEERING IN REȘITA
Eugen RĂDUCA, Babes -Bolyai University, Cluj Napoca, ROMANIA
Mihaela MOLNAR*, Babes -Bolyai University, Cluj Napoca, ROMANIA
Cornel HAȚIEGAN, Babes -Bolyai University, Cluj Napoca, ROMANIA
Roberta RĂDUCA, Politehnica University of Timisoara, ROMANIA

8. COMPUTATIONAL THINKING: THE INFLUENCE OF ENGAGING

AND INNOVATIVE INSTRUCTION IN ROMANIAN SCHOOLS
Adrian Runceanu, Constantin Brancusi University, Targu-Jiu, ROMANIA
Mihaela-Ana Runceanu, Ecaterina Teodoroiu High College, Targu-Jiu,
ROMANIA

9. DIGITALIZATION AND ENTREPRENEURSHIP EDUCATION

Corina Ana BORCOȘI, „Constantin Brâncuși” University from Târgu Jiu,
ROMANIA
Ilie BORCOȘI, „Constantin Brâncuși” University from Târgu Jiu, ROMANIA

8
Conference room: A015
Date 29. 11. 2024
Hours: 1500 – 1800
Chairman: Assoc. prof. PhD. Florin Grofu, “Constantin Brâncuși” University from
Târgu Jiu
Technical secretariat: Lecturer PhD. Gheorghe Gȋlcă, “Constantin Brâncuși”
University from Târgu Jiu

10. DIGITALIZATION AND SOCIAL EDUCATION

Corina Ana BORCOȘI, Scientific Researcher II, PhD, „Constantin Brâncuși”
University from Târgu Jiu, ROMANIA
Luminița Georgeta POPESCU, Prof. PhD Eng., „Constantin Brâncuși”
University from Târgu Jiu, ROMANIA
Mercedes CHACON, Prof. PhD Eng., „Costa Rica” University, COSTA RICA
Ilie BORCOȘI, Assoc. Prof. PhD Eng., „Constantin Brâncuși” University from
Târgu Jiu, ROMANIA

11. APPLICATION FOR CREATING A QUIZ GAME IN C#

Gîlcă Gheorghe, Lecturer Phd., “Constantin Brâncuși” University from Târgu
Jiu, ROMANIA
Lupulescu (Machidon) Alina-Elena, PhD Stud. Eng., “Constantin Brâncuși”
University from Târgu Jiu, University of Petroșani, Petroșani, ROMÂNIA
12. TRAJECTORY CONTROL FOR A MOBILE ROBOT USING A PID
ALGORITHM
Gîlcă Gheorghe, Lecturer Phd., “Constantin Brâncuși” University from Târgu
Jiu, ROMANIA
Lupulescu (Machidon) Alina-Elena, PhD Stud. Eng., “Constantin Brâncuși”
University from Târgu Jiu, University of Petroșani, Petroșani, ROMÂNIA
13. FUZZIFICATION AND DEFUZZIFICATION OF IRREVERSIBLE
DYNAMICS THROUGH ALGEBRAIC STRUCTURES
Mădălina Roxana Buneci, “Constantin Brâncuși” University from Târgu Jiu,
ROMANIA

14. CONTROL OF ROBOTIC uHANDBIT STRUCTURE USING

ULTRASONIC PROXIMITY SENSOR HC-SR04
Lecturer PhD. Eng., Marian IONESCU, “Constantin Brâncuși” University from
Tîrgu-Jiu, ROMANIA,
Assoc. Prof. Ph.D. Eng., Ilie BORCOSI, “Constantin Brâncuși” University from
Tîrgu-Jiu, ROMANIA

9
15. A BINARY SEARCH TREE DATA STRUCTURE, THE SCAPEGOAT
TREE
Lupulescu (Machidon) Alina-Elena, PhD Stud. Eng., „Constantin Brâncuși”
University from Târgu Jiu, University of Petroșani, Petroșani, ROMÂNIA
Gîlcă Gheorghe, Lecturer PhD Eng., „Constantin Brâncuși” University from
Târgu Jiu, ROMANIA

16. APPLICATIONS OF CYBER-PHYSICAL SYSTEMS IN THE REAL

WORLD
PhD student Eng. Sabin Florin POP, University of Petrosani, ROMANIA

10
 Section 2

Food, agriculture and rural development

Conference room: HUB

Date 29. 11. 2024
Hours: 1100 – 1400
Chairman: Prof. PhD. Popa Roxana-Gabriela, “Constantin Brâncuși” University
from Târgu Jiu
Technical secretariat: Lecturer PhD. Emil Cătălin ȘCHIOPU, “Constantin Brâncuși”
University from Târgu Jiu

1. CALENDULA OFFICINALIS CULTURE – BUSINESS WITH LOW

INVESTMENT, EFFICIENT PRODUCTION AND HIGH PROFIT
Popa Roxana–Gabriela, Constantin Brâncuși University from Tg Jiu, ROMANIA

2. MICROENCAPSULATION TECHNOLOGIES OF BIOLOGICALLY

ACTIVE COMPOUNDS FROM PLANT PRODUCTS
Daniela Cîrţînă, „Constantin Brâncuși“ University of Târgu-Jiu, Romania

3. HEAVY METALS BIOACCUMULATION IN SOIL AND PLANTS. CASE

STUDY: LIGNITE THERMAL POWER PLANTS FROM SE REGION OF
ROMANIA
NICA-BADEA DELIA*, CONSTANTIN BRANCUSI UNIVERSITY, TÂRGU
JIU, ROMÂNIA
TUFAN TEODORA GABRIELA*, SC ONCOPAT DIAGNOSTIC SRL,CLUJ
NAPOCA,ROMÂNIA
UDRIȘTIOIU AURELIAN, TITU MAIORESCU UNIVERSITY OF
BUCHAREST, ROMÂNIA

4. STARTING A BUSINESS BY SETTING UP A GREENHOUSE FOR

GROWING ORNAMENTAL PLANTS
Irina-Ramona PECINGINĂ, “Constantin Brâncuși” University from Târgu Jiu,
ROMANIA

11
5. EMPOWERING RURAL COMMUNITIES: THE IMPACT OF DIGITAL
TECHNOLOGIES AND ECO-FRIENDLY PRACTICES IN GORJ
COUNTY'S AGRITOURISM
Elena-Loredana STĂNCIOIU, „Constantin Brâncusi” University of Targu-Jiu”
Aniela BĂLĂCESCU, „Constantin Brâncusi” University of Targu-Jiu”

6. SETTING UP A TROUT FARM - AN OPPORTUNITY FOR RURAL

ECONOMIC DEVELOPMENT
Emil Cătălin ȘCHIOPU, „Constantin Brâncusi” University of Targu-Jiu”

7. PRODUCTION AND EXPLOITATION OF TRADITIONAL CLAY POTS

- AN ALTERNATIVE FOR SUSTAINABLE DEVELOPMENT OF RURAL
AREAS
Emil Cătălin ȘCHIOPU, „Constantin Brâncusi” University of Targu-Jiu”

8. ESTABLISHMENT AND DESIGN OF A CATTLE FARM-

SOLUTION FOR RURAL DEVELOPMENT
Cazalbaşu Violeta- Ramona, „Constantin Brâncusi” University of Targu-Jiu”

9. RECOVERY OF MILK AS BUTTER BY TRADITIONAL METHODS

Cazalbaşu Violeta- Ramona, „Constantin Brâncusi” University of Targu-Jiu”

12
 Section 3

ENERGY AND ENVIRONMENT

Conference room: 014

Date 29. 11. 2024
Hours: 1100 – 1400
Chairman: Assoc. prof. PhD.eng. Cristinel Popescu, “Constantin Brâncuși”
University from Târgu Jiu
Technical secretariat: Lecturer PhD.eng. Adriana Comarlă, “Constantin
Brâncuși” University from Târgu Jiu

1. ENERGY CONSUMPTION AND AIR POLLUTION IN THE JIU

VALLEY: ANALYZING INDUSTRIAL IMPACT AND SUSTAINABLE
SOLUTIONS
Alexandra Soica, University of Petrosani, Petrosani, ROMANIA
Razvan Bogdan Itu, University of Petrosani, Petrosani, ROMANIA
Bogdan Ioan Marc, University of Petrosani, Petrosani, ROMANIA

2. DEGRADATION MECHANISMS IN LITHIUM-ION BATTERIES: A

CRITICAL ANALYSIS OF PERFORMANCE DECLINE IN ELECTRIC
VEHICLES
Lucica Anghelescu, University “Constantin Brâncuși” of Tg-Jiu, ROMANIA
Bogdan Diaconu, University “Constantin Brâncuși” of Tg-Jiu, ROMANIA
Mihai Cruceru, University “Constantin Brâncuși” of Tg-Jiu, ROMANIA
Mircea Iovi, University “Constantin Brâncuși” of Tg-Jiu, ROMANIA (student)
Narcis Manta, University “Constantin Brâncuși” of Tg-Jiu, ROMANIA(student)

3. DEGRADATION MECHANISMS IN LITHIUM-ION BATTERIES: A

CRITICAL ANALYSIS OF PERFORMANCE DECLINE IN ELECTRIC
VEHICLES -part 2
Lucica Anghelescu, University “Constantin Brâncuși” of Tg-Jiu, ROMANIA
Bogdan Diaconu, University “Constantin Brâncuși” of Tg-Jiu, ROMANIA
Mihai Cruceru, University “Constantin Brâncuși” of Tg-Jiu, ROMANIA
Enache Alin, University “Constantin Brâncuși” of Tg-Jiu, ROMANIA(student)
Eduard Cîndea, University “Constantin Brâncuși” of Tg-Jiu, ROMANIA(student)

13
4. LIME EXPLAINABILITY REVEALS IMPLICIT ASSOCIATIONS IN
DEEP CONVOLUTIONAL ARCHITECTURES
Bogdan Diaconu, University “Constantin Brâncuși” of Tg-Jiu, ROMANIA
Lucica Anghelescu, University “Constantin Brâncuși” of Tg-Jiu, ROMANIA
Mihai Cruceru, University “Constantin Brâncuși” of Tg-Jiu, ROMANIA
Bâca Gheorghe,University “Constantin Brâncuși” of Tg-Jiu,ROMANIA(student)

5. FUNDAMENTAL MECHANISMS OF ELECTROSTATIC DEDUSTING -

DIFFUSION CHARGING OF PARTICLES IN ELECTROFILTERS
Andrei Cristian Rada, University of Petrosani, Petrosani, ROMANIA

6. ANALYSIS OF THE ELECTRICITY PRICE IN ROMANIA BETWEEN

2021 AND 2024
Alina Handra, Petroleum-Gas University of Ploiesti, Ploiesti, ROMANIA
Liliana Samoila, University of Petrosani, Petrosani, ROMANIA

7. VIRTUAL INSTRUMENT FOR DIMENSIONING A TOROIDAL

TRANSFORMER
Andrei Cristian Rada, University of Petrosani, Petrosani, ROMANIA
Alina Handra, Petroleum-Gas University of Ploiesti, Ploiesti, ROMANIA
Liliana Samoila, University of Petrosani, Petrosani, ROMANIA

8. DESIGN AND IMPLEMENTATION OF A 10.5 MW BIOMASS POWER

PLANT IN FRENCH GUINEA: TECHNOLOGICAL SOLUTION AND
ENERGY IMPACT
Alina-Daniela Handra,Petroleum-Gas University of Ploiesti, Ploiesti,ROMANIA

9. THE SCADA SYSTEM FOR THE CONTROL AND MONITORING OF A

MICRO-HYDROPOWER PLANT
C. Hațiegan, Babeș-Bolyai University, Reșița, ROMANIA
M.D. Stroia*(corresponding author),Babeș-Bolyai University,Reșița,ROMANIA
C. Popescu, “Constantin Brȃncuşi” University of Tȃrgu Jiu, ROMANIA
M.F. Preduș, Babeș-Bolyai University, Reșița, ROMANIA

10. ASSESSMENT OF MECHANICAL STORAGE TECHNOLOGIES USED

IN ENERGY SYSTEMS
Cruceru Mihai, University Constantin Brancusi, Targu Jiu, Romania
Diaconu Bogdan, University Constantin Brancusi, Targu Jiu, Romania
Anghelescu Lucica, University Constantin Brancusi, Targu Jiu, Romania

14
Conference room: 014
Date 29. 11. 2024
Hours: 1500 – 1800
Chairman: Assoc. prof. PhD.eng. Cristinel Popescu, “Constantin Brâncuși”
University from Târgu Jiu
Technical secretariat: Lecturer PhD.eng. Adriana Comarlă, “Constantin
Brâncuși” University from Târgu Jiu

11. INFLUENCE OF EVAPORATION ON ENERGY AND ECONOMIC

LOSSES OF PUMPED HYDRO ENERGY STORAGE
Cruceru Mihai, University Constantin Brancusi, Targu Jiu, Romania
Diaconu Bogdan, University Constantin Brancusi, Targu Jiu, Romania
Anghelescu Lucica, University Constantin Brancusi, Targu Jiu, Romania

12. POSSIBILITIES OF INCREASING THE ENERGY PERFORMANCE OF

HYDROELECTRIC PLANTS FROM BIHOR COUNTY BY
INTEGRATING THE FLOATING PHOTOVOLTAIC PANELS
Andrea Amalia Minda, Babeș-Bolyai University of Cluj Napoca, ROMANIA
Olga-Ioana Amariei, Babeș-Bolyai University of Cluj Napoca, ROMANIA
Daniela Negrea, University of Oradea, ROMANIA
Marius Lolea, University of Oradea, ROMANIA
Kristijan Cincar, West University of Timișoara, ROMANIA
Marius Susa, Petroleum and Gas University of Ploiești, ROMANIA

13. ANALYSIS AND INCREASE OF ELECTRICITY AVAILABILITY OF

PHOTOVOLTAIC PANELS APPLYING FUZZY LOGIC CONTROL
Andrea Amalia Minda, Babeș-Bolyai University, Cluj Napoca, ROMANIA
Amariei Olga-Ioana, Babeș-Bolyai University, Cluj Napoca, ROMANIA
Daniela Negrea, University of Oradea, Oradea, ROMANIA
Marius Lolea, University of Oradea, Oradea, ROMANIA
Kristijan Cincar, West University of Timișoara, Timișoara, ROMANIA
Marius Susa, Petroleum and Gas University of Ploiești, ROMANIA

14. STUDY ON THE ECOLOGICAL FUNCTIONING OF 330 MW ENERGY

GROUPS USING FOSSIL FUELS
Cristinel Racoceanu, ”Constantin Brâncuşi” University of Târgu Jiu, ROMANIA

15
15. ELECTRIC CIRCUIT SIZING SOFTWARE FOR POWERING
ASYNCHRONOUS MOTORS WITH SHORT-CIRCUIT ROTOR
C.M. Muscai, Babeș-Bolyai University, Reșița, ROMANIA
L.B. Protea, Polytechnic University of Bucharest, Faculty of Electrical
Engineering, Bucuresti, ROMANIA
C.Popescu, “Constantin Brȃncuşi” University of Tȃrgu Jiu, ROMANIA
C. Hațiegan, Babeș-Bolyai University, Reșița, ROMANIA
M.D. Stroia* (corresponding author), Babeș-Bolyai University, Reșița,
ROMANIA

16. IMPROVING THE ENERGY EFFICIENCY OF ELECTRICAL SYSTEMS

USING HIGH FREQUENCY POWER TRANSFORMERS
Adina TĂTAR, Constantin Brancusi University of Targu-Jiu, Faculty of
Engineering, ROMÂNIA

17. CONSIDERATION ON THE DEVELOPMENT OF THE PUMPED

STORAGE HYDROELECTRIC SYSTEM
IONICI CRISTINA, University “Constantin Brâncuşi , Tg-Jiu, Romania
IANASI CĂTĂLINA, University “Constantin Brâncuşi , Tg-Jiu, Romania
Master student Răduțiu Răzvan , I TAPE
Students: Bărboianu Mihai , Țîrcă Ana, IV MEn

18. CMS IN THE DIGITALIZATION OF FIXED ASSET MANAGEMENT

M.D. Stroia, Babeș-Bolyai University, Reșița, ROMANIA
C. Hațiegan*(corresponding author), Babeș-Bolyai University,Reșița,
ROMANIA
C. Popescu, “Constantin Brȃncuşi” University of Tȃrgu Jiu, ROMANIA
C.M. Muscai, Babeș-Bolyai University, Reșița, ROMANIA

19. MODERN TECHNOLOGIES TO REDUCE SULPHUR OXIDE

EMISSIONS
Phd. Vlaicu Popa Marius Eramia, Oltenia Energy Complex

20. ENERGY TRANSITION IN GERMANY

Adriana Comarlă, University „Constantin Brȃncuşi” in Targu Jiu, ROMANIA
Josef Timmerberg, Jade University, Wilhelmshaven, GERMANY
Daniela Cîrțînă, University „Constantin Brȃncuşi” in Targu Jiu, ROMANIA
Francisc Comarlă, University „Constantin Brȃncuşi” in Targu Jiu, ROMANIA

16
 SECTION 4

Mechanical engineering, Materials and manufacturing system, Quality

management

Conference room: A016

Date 29. 11. 2024
Hours: 1100 – 1400
Chairman: Prof. PhD. Liviu Marius CÎRȚÎNĂ, “Constantin Brâncuși” University
from Târgu Jiu
Technical secretariat: Lecturer PhD. Alin STĂNCIOIU, “Constantin Brâncuși”
University from Târgu Jiu

1. CAPABILITIES OF MEANS USED IN MEASUREMENT PROCESSES.

CASE STUDY
Prof. PhD. eng. LIVIU MARIUS CÎRȚÎNĂ, „Constantin Brâncuşi” University
of Tg-Jiu, ROMANIA
Lecturer PhD. eng. CONSTANȚA RĂDULESCU, „Constantin Brâncuşi”
University of Tg-Jiu, ROMANIA

2. THE EVOLUTION OF ENTREPRENEURSHIP EDUCATION

THROUGH PRACTICAL APPLICATION
Stefan Ghimisi, Constantin Brâncuși University of Târgu Jiu, ROMÂNIA

3. RESEARCH ON WASTEWATER COLLECTION AND TREATMENT

Letitia Ghimisi, National University of Science and Technology POLITEHNICA
Bucharest, ROMÂNIA

4. MECHANISMS USED TO UNLOAD CONTAINERS WITH GARBAGE

RESIDUES
Assoc. Prof. Ovidiu ANTONESCU, University Politehnica of Bucharest
PhD Stud. Dana VALEANU, University Politehnica of Bucharest
Prof. Daniel STRIMBEANU, “Nicolae Balcescu” Technological High School of
Bals
Prof. Păun ANTONESCU, University Politehnica of Bucharest

17
5. QUALITY MANAGEMENT STRATEGIES IN RESEARCH-
DEVELOPMENT PROJECTS IN THE AUTOMOTIVE
A.Epureanu, National University of science and Technology Politehnica Bucharest,
Bucharest, ROMANIA
D.Silion, National University of science and Technology Politehnica Bucharest,
Bucharest, ROMANIA
O.Chivu, National University of science and Technology Politehnica Bucharest,
Bucharest, ROMANIA
D. Nitoi, National University of science and Technology Politehnica Bucharest,
Bucharest, ROMANIA
C. Enache, National University of science and Technology Politehnica Bucharest,
Bucharest, ROMANIA
N. Merloi, National University of science and Technology Politehnica Bucharest,
Bucharest, ROMANIA

6. EVALUATION OF THE POSSIBILITIES OF ULTRASONIC CONTROL

OF WELDED JOINTS
A. Epureanu, National University of Science and technology Politehnica Bucharest,
Bucharest, ROMANIA
D. Silion, National University of Science and technology Politehnica Bucharest,
Bucharest, ROMANIA
V. Mustață (Udriștoiu), National University of Science and technology Politehnica
Bucharest, Bucharest, ROMANIA
A. Popescu*, National University of Science and technology Politehnica Bucharest,
Bucharest, ROMANIA
D. Nitoi*, National University of Science and technology Politehnica Bucharest,
Bucharest, ROMANIA
C. Radu, National University of Science and technology Politehnica Bucharest, Bucharest,
ROMANIA

7. IMPROVING HEALTH AND SAFETY WORKING CONDITIONS IN A

WIRE DRAWING PRODUCTION UNIT
A. Cringureanu (Tănase), National University of Science and technology Politehnica
Bucharest, Bucharest, ROMANIA
D. Nitoi, National University of Science and technology Politehnica Bucharest, Bucharest,
ROMANIA
A. Popescu* (Simionescu), National University of Science and technology Politehnica
Bucharest, Bucharest, ROMANIA
N. Merloi (Ene), National University of Science and technology Politehnica Bucharest,
Bucharest, ROMANIA
A. Otomega, National University of Science and technology Politehnica Bucharest,
Bucharest, ROMANIA
V Mustață (Udristoiu), National University of Science and technology Politehnica
Bucharest, Bucharest, ROMANIA

18
8. STUDY ON THE SITUATION OF OCCUPATIONAL ACCIDENTS ON
CONSTRUCTION SITES IN ROMANIA
Drd. Mădălina-Giulia BOBOCEA, National University of Science and
Technology POLITEHNICA Bucharest, Bucharest, ROMANIA
Drd. Elena-Cristina DEDIU, National University of Science and Technology
POLITEHNIC, Bucharest, ROMANIA
Drd. Andrei IACOB, National University of Science and Technology
POLITEHNICA Bucharest, Bucharest, ROMANIA
Conf. dr. ing. Claudia BORDA, National University of Science and Technology
POLITEHNIC, Bucharest, ROMANIA
Sl. dr. ing. Constantin RADU, National University of Science and Technology
POLITEHNIC, Bucharest, ROMANIA

9. THE HEALTH RISKS THAT ASBESTOS FROM OLD BUILDINGS

POSES
Constantin LUCA, Ph.D. student, National University of Science and Technology
POLITEHNICA Bucharest
Oana Roxana CHIVU, Prof. PhD. eng., Faculty of Industrial Engineering and
Robotics, National University of Science and Technology POLITEHNICA
Bucharest
Marilena GHEORGHE, Ph.D. Eng., Lecturer, Faculty of Industrial Engineering
and Robotics, National University of Science and Technology POLITEHNICA
Bucharest
Cornelia LUCHIAN, Ph.D. Eng., Lecturer, Faculty of Industrial Engineering
and Robotics, National University of Science and Technology POLITEHNICA
Bucharest
Marin ZAMFIR, Ph.D. student, National University of Science and Technology
POLITEHNICA Bucharest

10. STUDY REGARDING THE USE OF BANKS SUPPORT SYSTEMS IN

THE FIELD OF CONSTRUCTION
Adrian MOISE, Ph.D. student, National University of Science and Technology
POLITEHNICA Bucharest
Oana Roxana CHIVU, Prof. PhD. eng., Faculty of Industrial Engineering and
Robotics, National University of Science and Technology POLITEHNICA
Bucharest
Marilena GHEORGHE, Ph.D. Eng., Lecturer, Faculty of Industrial Engineering
and Robotics, National University of Science and Technology POLITEHNICA
Bucharest

19
 Claudia BORDA, Prof. PhD. eng., Faculty of Industrial Engineering and
Robotics, National University of Science and Technology POLITEHNICA
Bucharest
Andrei IACOB, Ph.D. student, National University of Science and Technology
POLITEHNICA Bucharest

11. THE IMPACT OF GASES PRODUCED BY FIRES AT CULTURAL-

MUSICAL EVENTS HELD IN UNCONVENTIONAL SPACES
Drd. Nicoleta MERLOI, National University of Science and Technology
POLITEHNIC, Bucharest, ROMANIA
Dr. ing. Mihaela Helstern, National University of Science and Technology
POLITEHNIC, Bucharest, ROMANIA
Prof.dr.ing. Dan Florin NITOI, National University of Science and Technology
POLITEHNIC, Bucharest, ROMANIA
Drd. Giulia Madalina BOBOCEA , National University of Science and
Technology POLITEHNIC, Bucharest, ROMANIA
Claudia BORDA, Prof. PhD. eng., Faculty of Industrial Engineering and
Robotics, National University of Science and Technology POLITEHNICA
Bucharest

12. THE EVOLUTION OF STRESS IN THE ERA OF DIGITIZATION OF

WORK
Andrei BUJOR, Ph.D. student, National University of Science and Technology
POLITEHNICA Bucharest
Constantin BUJOR, Ph.D. Eng., Lecturer, Faculty of Industrial Engineering and
Robotics, National University of Science and Technology POLITEHNICA
Bucharest
Nicoleta ENE (MERLOI), Ph.D. student., Faculty of Industrial Engineering and
Robotics, National University of Science and Technology POLITEHNICA
Bucharest
Giulia BOBOCEA, Ph.D. student., Faculty of Industrial Engineering and
Robotics, National University of Science and Technology POLITEHNICA
Bucharest
Marinela MARINESCU, Ph.D. Eng., Faculty of Industrial Engineering and
Robotics, National University of Science and Technology POLITEHNICA
Bucharest

20
13. INCREASED SAFETY IN CAR REPAIR SHOPS
Alexandru CANA, Ph.D. student, National University of Science and Technology
POLITEHNICA Bucharest
Adrian MOISE, Ph.D. student, National University of Science and Technology
POLITEHNICA Bucharest
Andrei IACOB, National University of Science and Technology POLITEHNICA
Bucharest
Ph.D. student, National University of Science and Technology POLITEHNICA
Bucharest
Stefan ȚEPURE, National University of Science and Technology POLITEHNICA
Bucharest
Ph.D. student, National University of Science and Technology POLITEHNICA
Bucharest
Catalina ENACHE, National University of Science and Technology POLITEHNICA
Bucharest
Claudia BORDA, Ph.D. National University of Science and Technology
POLITEHNICA Bucharest

14. INTEGRATION OF AN IMES SYSTEM INTO AN AUTOMATED

WELDING PROCESS
Demetrius PETRESCU (DUBIC) National University of Science and Technology
POLITEHNICA Bucharest
Oana- Roxana CHIVU National University of Science and Technology,
POLITEHNICA Bucharest
Anamaria Ioana FEIER University Politechnica Timișoara,
Alin ION ȚĂPIRDEA National University of Science and Technology,
POLITEHNICA Bucharest
Claudia BORDA National University of Science and Technology, POLITEHNICA
Bucharest

15. INTEGRATING NON-EU WORKFORCE INTO ROMANIA’S WIND

INDUSTRY
Elena-Cristina DEDIU, National University of Science and Technology
POLITEHNIC, Bucharest, ROMANIA
Mădălina-Giulia BOBOCEA, National University of Science and Technology
POLITEHNIC, Bucharest, ROMANIA
Oana-Roxana CHIVU, National University of Science and Technology
POLITEHNIC, Bucharest, ROMANIA
Anamaria Ioana FEIER, University Politechnica Timișoara
Andrei IACOB, National University of Science and Technology POLITEHNIC,
Bucharest, ROMANIA

21
16. COMPARATIVE ANALYSIS OF INSTRUMENTAL METHODS FOR
IDENTIFYING XENOBIOTICS FOR SOIL POLLUTION REDUCTION
Tamara LEONTE, National University of Science and Technology POLITEHNICA
Bucharest
Liviu CÎRȚÂNĂ, National University of Science and Technology POLITEHNICA
Bucharest
Alexandru CANA, Ph.D. student, National University of Science and Technology
POLITEHNICA Bucharest
Adrian MOISE, Ph.D. student, National University of Science and Technology
POLITEHNICA Bucharest
Stefan ȚEPURE, National University of Science and Technology POLITEHNICA
Bucharest
Catalina ENACHE, National University of Science and Technology POLITEHNICA
Bucharest

17. EVALUATION OF THE LEVEL OF PSYCHOSOCIAL RISK AND THE

IMPACT OF STRESS ON WORKERS' HEALTH
Nicoleta ADOCHITEI (PRESURA) National University of Science and Technology
POLITEHNIC, Bucharest, ROMANIA
Liviu CÎRȚÂNĂ National University of Science and Technology POLITEHNIC,
Bucharest, ROMANIA
Eugenia BULBOACA National University of Science and Technology
POLITEHNIC, Bucharest, ROMANIA
Cornelia LUCHIAN National University of Science and Technology POLITEHNIC,
Bucharest, ROMANIA
Adrian MOISE National University of Science and Technology POLITEHNIC,
Bucharest, ROMANIA

18. EFFECTS OF GSM ANTENNAS ON LIVING ORGANISMS

Marin ZAMFIR, Ph.D. student, National University of Science and Technology
POLITEHNICA Bucharest
Oana Roxana CHIVU, Prof. PhD. eng., Faculty of Industrial Engineering and
Robotics, National University of Science and Technology POLITEHNICA
Bucharest
Andrei IACOB, Ph.D. student, National University of Science and Technology
POLITEHNICA Bucharest
Alex ȚĂPÎRDEA, Ph.D. student, National University of Science and Technology
POLITEHNICA Bucharest
Constantin LUCA, Ph.D. student, National University of Science and Technology
POLITEHNICA Bucharest

22
19. ANALYSIS OF THE LOADS OF THE TELESCOPIC CRANE ARM
WITH A LOAD OF 5000KG
Lenuța Cîndea, Babeș-Bolyai University of Cluj-Napoca, ROMÂNIA
Cornel Hațiegan, Babeș-Bolyai University of Cluj-Napoca, ROMÂNIA
Cristinel Popescu, Constantin Brâncuși University of Tg-Jiu, ROMÂNIA
Florin Grofu, Constantin Brâncuși University of Tg-Jiu, ROMÂNIA

20. PLASMA JET ARC MODELING AND SIMULATION

Lenuța Cîndea, Babeș-Bolyai University of Cluj-Napoca, ROMÂNIA
Cornel Hațiegan, Babeș-Bolyai University of Cluj-Napoca, ROMÂNIA
Cristinel Popescu, Constantin Brâncuși University of Tg-Jiu, ROMÂNIA
Florin Grofu, Constantin Brâncuși University of Tg-Jiu, ROMÂNIA

21. VALIDATION OF THE MODAL NUMERICAL ANALYSIS WITH THE

ANALYTICAL METHOD FOR A SS-C-SS-C RECTANGULAR PLATE
Băcescu N., Babeș-Bolyai University, Cluj-Napoca, ROMANIA
Atinge G., Babeș-Bolyai University, Cluj-Napoca, ROMANIA
Praisach Z.I., Babeș-Bolyai University, Cluj-Napoca, ROMANIA
Turiac R.-R., Babeș-Bolyai University, Cluj-Napoca, ROMANIA

23
Conference room: A016
Date 29. 11. 2024
Hours: 1500 – 1800
Chairman: Prof. PhD. Oana Roxana CHIVU, National University of Science and
Technology POLITEHNICA Bucharest
Technical secretariat: Lecturer PhD. Cătălina IANĂȘI, “Constantin Brâncuși”
University from Târgu Jiu

22. COUPLED ANALYSIS OF CHARACTERISTICS OF

ELECTROMAGNETIC DC CRANES FOR TRACTION
Cornel Hațiegan, Babeș-Bolyai University of Cluj-Napoca, ROMÂNIA
Lenuța Cîndea, Babeș-Bolyai University of Cluj-Napoca, ROMÂNIA
Cristinel Popescu, Constantin Brâncuși University of Tg-Jiu, ROMÂNIA
Florin Grofu, Constantin Brâncuși University of Tg-Jiu, ROMÂNIA

23. STUDY REGARDING THE INFLUENCE OF THE PRINTING SPEED

ON THE DIMENSIONAL ACCURACY OF FDM PRINTED PLA
SPECIMENS
Deian Ardeljan, Babeș-Bolyai University, Cluj-Napoca, ROMANIA
Sebastian Grollmusz, Babeș-Bolyai University, Cluj-Napoca, ROMANIA
Raul-Rusalin Turiac, Babeș-Bolyai University, Cluj-Napoca, ROMANIA
Nicoleta Băcescu, Babeș-Bolyai University, Cluj-Napoca, ROMANIA
Relu-Costel Ciubotariu, Babeș-Bolyai University, Cluj-Napoca, ROMANIA
Doina Frunzăverde, Babeș-Bolyai University, Cluj-Napoca, ROMANIA

24. THE USE OF COLD ACETONE VAPORS TO SMOOTH THE

SURFACE ROUGHNESS OF PARTS OBTAINED BY THE FDM
METHOD FROM PLA AND ABS
Turiac Raul-Rusalin, Babeș-Bolyai University, Cluj-Napoca, ROMANIA
Korka Zoltan-Iosif* (corresponding author), Babeș-Bolyai University, Cluj-
Napoca, ROMANIA
Ardeljan Deian Dorel, Babeș-Bolyai University, Cluj-Napoca, ROMANIA

25. METHOD OF STATISTICAL CONTROL OF PART SIZES IN LARGE

SERIES AND MASS PRODUCTION
Ana-Maria Budai,Babeș-Bolyai University of Cluj-Napoca,ROMÂNIA
Mihaela Molnar *,Babeș-Bolyai University of Cluj-Napoca, ROMÂNIA
Cristinel Popescu, „Constantin Brâncuşi” University of Târgu-Jiu, ROMÂNIA
Cornel Hațiegan, Babeș-Bolyai University of Cluj-Napoca,ROMÂNIA

24
26. THE DYNAMIC BEHAVIOR OF CLAMPED-CANTILEVER PIPE IN
COMPARATIVE ANALYSIS WITH A DOUBLE-CLAMPED PIPE
USING FINITE ELEMENT MODAL ANALYSIS
Ștefan Popescu, Babeș-Bolyai University of Cluj-Napoca, ROMÂNIA
Gilbert-Rainer Gillich, Babeș-Bolyai University of Cluj-Napoca, ROMÂNIA
Zeno-Iosif Praisach, Babeș-Bolyai University of Cluj-Napoca, ROMÂNIA

27. A FUTURE APPROACH TO MATERIAL RECYCLING

Lecturer PhD. eng. Florin CIOFU, Engineering Faculty, ”Lucian Blaga”
University of Sibiu

28. THE RECOVERY OF GLASS AND SILICON FROM PHOTOVOLTAIC

PANELS AT THE END OF THEIR SERVICE LIFE
Lecturer PhD. eng. Florin CIOFU, Engineering Faculty, ”Lucian Blaga”
University of Sibiu
Student Victor GAŞPAR, Engineering Faculty, ”Lucian Blaga” University of
Sibiu

29. QUALITY TOOLS USED IN TRAINING FUTURE ENGINEERS

Gina-Maria Moraru, “Lucian Blaga” University of Sibiu, ROMANIA

30. THE APPLICABILITY OF UV RADIATION IN STERILIZATION

Mihut Nicoleta-Maria, Assoc. prof. PhD, “Constantin Brâncuși” University of
Târgu Jiu, ROMANIA

31. TECHNIQUES OF MICROSTRUCTURAL ANALYSIS OF

COMPOSITE MATERIALS
Minodora-Maria Pasăre, “Constantin Brancusi” University of Tg-Jiu,
ROMANIA

32. STUDY ON THE MECHANISM WITH ACCESS BARS IN A ROBOTIC

PARKING LOT
Edward RĂȘCHITOR , Student – Ph.D. Candidate: Eng National University of
Science and Technology POLITEHNICA Bucharest
Carmen Elisabeta RADU, Student – Ph.D. Candidate: Eng National University
of Science and Technology POLITEHNICA Bucharest

25
33. CAD APPLICATIONS IN DESIGNING AND MANUFACTURING
DEVICES WITH ECCENTRIC
Lecturer PhD. eng. CONSTANȚA RĂDULESCU, Engineering Faculty,
„Constantin Brâncuşi” University of Tg-Jiu, ROMANIA
Prof. PhD. eng. LIVIU MARIUS CÎRȚÎNĂ, Engineering Faculty, „Constantin
Brâncuşi” University of Tg-Jiu, ROMANIA

34. CAM APPLICATIONS IN THE DESIGN AND MANUFACTURE OF

ECCENTRIC DEVICES
Lecturer PhD. eng. CONSTANȚA RĂDULESCU, Engineering Faculty,
„Constantin Brâncuşi” University of Tg-Jiu, ROMANIA
Prof. PhD. eng. LIVIU MARIUS CÎRȚÎNĂ, Engineering Faculty, „Constantin
Brâncuşi” University of Tg-Jiu, ROMANIA

35. OPTIMIZING THE 3D PRINTING PROCESS FROM CAD MODELING

TO OBTAINING THE FINISHED PART
Lecturer PhD Eng. Stăncioiu Alin, Constantin Brâncusi University of Targu-Jiu,
ROMANIA
Assist. Eng. Stăncioiu Elena-Loredana, Constantin Brâncuşi University of
Targu-Jiu, ROMANIA

36. THE EFFICIENCY OF THE ADDITIVE MANUFACTURING METHOD

IN MAKING PROTOTYPES AND FINISHED PRODUCTS
Lecturer PhD Eng. Stăncioiu Alin, Constantin Brâncuși University of Targu-
Jiu, ROMANIA
Assist. Eng. Stăncioiu Elena-Loredana, Constantin Brâncuşi University of
Targu-Jiu, ROMANIA

37. ASPECTS OF DESIGN ACTIVITY IN THE FIELD OF MECHANICAL

ENGINEERING
Catalina Ianasi, “Constantin Brancusi” University of Tg-Jiu, Romania

38. APPLICABLE MANAGEMENT SYSTEMS IN THE FIELD OF

UNCONVENTIONAL TECHNOLOGIES
Lecturer PhD. eng. Alin NIOAŢĂ, Engineering Faculty, ”Constantin
Brâncuşi” University of Tg-Jiu, ROMANIA

26
39. EFFECTIVE STRATEGIC FORMULATION FOR COMPETITIVE
BUSINESSES IN GORJ COUNTY
David Rodica, MBA, Constantin Brâncuși University from Targu Jiu
PhD. Cumpănașu Vasile, Constantin Brâncuși University from Targu Jiu

40. QUALITY MANAGEMENT OF THE RESEARCH ACTIVITIES IN

UNIVERSITIES: NAVIGATING CHALLENGES AND EMBRACING
INNOVATION
David Rodica, MBA, Constantin Brâncuși University from Targu Jiu
PhD. Cumpănașu Vasile, Constantin Brâncuși University from Targu Jiu

41. STUDY OF MODAL IDENTIFICATION OF COMPOSITE MATERIALS

WITH RUBBER MATRIX AND FA AND PVC INSERTS
Dr.Eng. Dimulescu Sabin Cristinel, Constantin Brancusi University of Targu-
Jiu, Gorj, Romania,
Eng. Wetternek Mihaela, Resita Technical College, Romania

42. INDUSTRY 5.0 AND ITS IMPACT ON THE COMMUNITY, FROM THE
ENGINEERS' PERSPECTIVE
Gina-Maria Moraru, “Lucian Blaga” University of Sibiu, ROMANIA

27