New Syllabus 3rd sem. to 6th Sem.

Mech(Auto) 1

DIRECTORATE OF TECHNICAL EDUCATION,

KAHILIPARA, GUWAHATI-19

DIPLOMA PROGRAMME IN

MECHANICAL
(AUTOMOBILE)
ENGINEERING

NEW SYLLABUS

SCTE,Assam l JANUARY,2019

SCTE,ASSAM
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 2

3RD SEMESTER

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 3

MECHANICAL (AUTO) ENGINEERING, (NEW SYLLABUS)

3rd semester
COURSE STRUCTURE OF 3rd SEMESTER MECHANICAL (AUTOMOBILE) ENGINEERING

S Code Study Evaluation Scheme

l No. Scheme
N (Contact Theory Practical
o hours/week) Total
Sessional (SS) Practi Marks(
Subject Pract
T H Total cal Theory Credit
Pass ical Pass
ES A A (TA+ Asses +Practi
L T P (ESE+ Test (PT+
E HA) sment cal)
SS) (PT) PA)
(PA)
#
@
1 Co-301 Computer 3 3 70 10 20 30 33/100 25 25 17/50 150 4
Application &
Programming
2 Hu- Engineering 3 70 10 20 30 33/100 100 3
302 Economics &
Accountancy
3 Fundamental of 3 3 70 10 20 30 33/100 25 25 17/50 150 4
El/Et- Electrical &
304 Electronics
Engineering
4 Me/Ch Environmental 3 70 10 20 30 33/100 100 3
301 Education
5 Me- Fluid Mechanics & 3 1 3 70 10 20 30 33/100 25 25 17/50 150 5
302 Fluid Machines
6 Me- Manufacturing 3 3 70 10 20 30 33/100 25 25 17/50 150 4
303 Technology-I
7 Au- Professional 1 2 25 25 17/50 50 2
310 Practice- I
Total 19 1 14 850 25
34

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 4

1. Course Title–Computer Application & Programming

(All Branches)
1. Course title: Computer Application & Programming

2: Course Code –Co-301

3: Semester- 3rd

4: Aim of the Course :

 To give basic concepts related to organisation of a computer
 To give fundamental terminologies in networking
 To develop simple programs in C.
5: Course Outcome:
On completion of the course students will be able to:

 Explain the basics of a computer hardware and software

 Solve problems related to number systems
 Define basics of Operating System
 Familiarize with networking components
 Write simple C programs

6: Prerequisites for the Course: Have basic idea about a computer and its functions.
7: Teaching Scheme (in hours):

Teaching Scheme
L T P Total hours per
week
3 0 3 6
8: ExaminationScheme :

Theory Sessional (TS) Practical Practical Sessional

(T) (P) (PS)

Full Marks 70 30 25 25
Pass Marks 33 17

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 5

9: Detailed Course Content:

Unit Topic/Sub-Topics Intended Learning Outcome Hours

1 Computer Architecture: 1. Define a computer and identify its 8
Brief history, Charles Babbage Machine, Von parts.
Neuman Architecture, block diagram, memory 2. Define computer memory &
&it’s different types, I/O devices, Role of O.S., describe its different types.
computer languages, translator software, 3. Define computer languages
editor. Data, different types of data, &translators.
information and its characteristics 4. Describe the characteristics of
information.
2 Number System and codes: 8

Different number system- decimal, binary, 5. Define decimal, binary, octal &
octal, hexadecimal number system, their hexadecimal number systems.
conversion, 1’s and 2’s Complement, 6. Convert between different
subtraction using complements. Different number systems.
codes- ASCII, BCD, Ex-3, Gray. Conversion 7. Define 1’s & 2’s complements.
from Gray to binary and vice-versa, BCD 8. Subtract using 1’s & 2’s
addition. complements.
9. Describe some different codes.

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 6

Unit Topic/Sub-Topics Intended Learning Outcome Hours

3 Introduction to Operating System: 5

Definition, single user and multi-user OS, 10. Define operating system.
different function performs by OS, various 11. Operate different commands of
popular OS like DOS, Windows, DOS, Windows &
UNIX/LINUX. DOS and UNIX commands. UNIX/LINUX.

4 Computer Network and the Internet: 6

Definition, necessity of network, different 12. Define network.
types of network-LAN, MAN, WAN, network 13. Describe different types of
topology, transmission media, different network.
network devices like NIC, hub, bridge, switch, 14. Define network topology.
gateway. Introduction to the internet, Internet 15. Describe different network
services, browser, search engine. devices.
16. Define internet & describe
different internet services.
17. Explain use of different browsers
& search engines.
5 Introduction to C programming: 15
Fundamentals of programming-Algorithm & 18. Write algorithm and flow charts
Flowchart, source code and object code, Basic for simple programs
structure of C programs, Executing a C 19. Define basic terminology of C
program, Constants, Variables, and data types. language.
Operators and expression, Input Output 20. Write small programusing C
function like printf, scanf, getchar, putchar, language.
gets, puts, Decision making and branching 21. Write diversified solutions using
using IF..Else, Switch, looping using for, C language.
while, and do-while, array. 22. Differentiate between IF..Else
and Switch statement.

Internal Assessment 3

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 7

10. Intellectual Skills:

 Logical reasoning
 Relating programming concepts in problem solving

11. Motor Skills:

 Learn to use and handle a computer and its peripherals.

List of Lab Exercises :

I. Basic commands for computer system maintenance.

II. Preparation of Documents

Introduction to Word processing, Opening a document, preparing documents, inserting diagrams and
tables, Editing document- (a) Character, word and line editing, (b) Margin Setting, Paragraph alignment,
(c) Block Operations, (d) Spell Checker, (e) Saving a document, (f) Mailmerge.

III. Information Presentation through Spread Sheet

Application of Spread Sheet, Structure of spreadsheets, Preparing table for simple data and numeric
operations, Using formulae and functions in excel operations, Creation of graphs, Pie charts, bar charts.

IV. Preparation of presentation

Creation of electronic slides on any topic, Practice of animation effect, presentation of slides.

V. Programming in C

Editing a C program, defining variables and assigning values to variables Arithmetic and relational
operators, arithmetic expressions and their evaluation Practice on in iput/output function like getchar,
putchar, gets, puts, scanf, printf etc. Programming exercise on simple if statement, If..else statement,
switch statement Programming exercise on looping with do-while, while, for loop and array.

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 8

10: Distribution of Marks:

Unit Topic Type of Question Total

Objective Short Descriptive Marks
1 Computer Architecture 6 5 5 16
2 Number System and codes 4 2 8 14
3 Introduction to Operating 4 2 4 10
System
4 Computer Network and the 5 3 6 14
Internet
5 Introduction to C programming 6 3 7 16
25 15 30 70

11: Table of specification:

Unit Topics Time allotted in Percentage K C A HA

(a) hours Weightage
(b) (c)
1 Computer Architecture 8 19 ✓
2 Number Systems & Codes 8 19 ✓ ✓
3 Introduction to Operating Systems 5 12 ✓
4 Computer Network & the Internet 6 15 ✓ ✓
5 Introduction to C Programming 15 35 ✓ ✓
Total  b=42 100

K = Knowledge C = Comprehension A =Application HA = Higher Than

Application (Analysis, Synthesis, Evaluation)

𝑏
𝑐= ∗ 100
𝛴𝑏

Detailed Table Of Specifications

Unit Topics Objective Short Descriptive
K C A T K C A HA T K C A HA T
1 Computer Architecture 7 7 5 5 4 4

2 Number Systems & Codes 4 4 2 2 4 4 8

3 Introduction to Operating 4 4 2 2 4 4
Systems
4 Computer Network & the 5 5 3 3 3 4 7
Internet
SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 9

5 Introduction to C 5 5 3 3 3 4 7
Programming
Total 25 25 15 15 18 12 30

K = Knowledge C = Comprehension A = Application HA = Higher Than Application T = Total

12: Suggested Implementation Strategies:

1: As the subject is taught to the students of all branches, basic knowledge required to
understand the computer hardware and software needs to be emphasized.
2: Too much of hardware details could be avoided.
3: Programming section theory could be taught side by side in the lab.

13: Suggested Learning Resources :

1. Fundamentals of Computer, Rajaraman, PHI

2. It Tools and Applications, DOEACC “O” Level, Firewall Media
3. Let us C by Y. Kanetkar, BPB
4. Programming in ANSI C / E. Balagurusamy / Tata McGraw-Hill

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 10

2. Course Title– Engineering Economics and Accountancy

(All Branches)
1. Course Title : ENGINEERING ECONOMICS AND ACCOUNTANCY
2. Course Code: Hu – 302
3. Semester: 3rd

4. Aim of the Course:

1. To introduce the students to some important economic and accounting terms.

2. To acquaint the students with some economic laws and with the functions of money, bank etc.

3. To make the students capable of recording business transaction under double entry system.

4. To introduce the students about financial statements.

5. Course Outcomes:

On completion of the course on EEA, students will be able to

 CO 1 = Define some important economic and accounting terms.

 CO 2 = Explain some basic economic laws.
 CO 3 = Describe overall economic environment.
 CO 4 = Explain double entry system of book keeping.
 CO 5 = Record business transactions under double entry system of book keeping
 CO 6 = Define financial statements.

1. Teaching Scheme (in hours)

Lecture Tutorial Practical Total
42 hrs 3 hrs -- 45 hrs
2. Examination Scheme:
Theory Practical
Total
Examination Sessional Total Pass
Examination Sessional Marks
Full Marks Full Marks Marks Marks

70 30 100 33 -- -- -- -- 100

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 11

3. Detailed Course Content:

Chapter Intended Duration
Chapter Title Content
No. Learning (in hours)
Outcomes 21 hrs
Part – A : Engineering Economics

i) Definition of Economics, its i) explain core

utility and scope of study economic terms
ii) Definition of Engineering concepts and
5
Economics theories
ii) Meaning and concepts of Utility,
Introduction to
1.0 Consumption, Value, Price, Goods
Economics :
and National Income, inflation
iii) Wants – Definition and
characteristics
iv) Wealth & Welfare– Definition,
meaning and types
i) Meaning and types of Demand Define the Laws
ii) The Law of Demand, its of Demand and
limitations Supply
Demand and iii) Preparation of Demand Schedule
2.0 4
Supply : iv) Meaning of Supply
ii) The Law of Supply, its
limitations
iii) Preparation of Supply Schedule
i) Meaning and factors of production i) Define factors
ii)Factors determining efficiency of of production
labour ii) Explain
3.0 Production : 5
iii) Savings, investment and capital formation of
formation capital
iv)Meaning of production function
i) Meaning of money i) Understand
ii) Types of money meaning and
4.0 Money: 2
iii) Functions of money functions of
money

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 12

Intended
Chapter Content Duration
Chapter Title Learning
No. (in hours)
Outcomes
i) Central Bank – its functions i) Distinguish
Banking ii) Commercial banks – its the functions of
5.0 3
Organisation : functions different banks

i) Objectives of pricing policy i) explain pricing

6.0 Pricing ii) price determinants policy 2
iii) Price discrimination
21 hrs
Part – B : Accountancy

i) Definition & objectives of Book- i) Define Double

keeping Entry System of
ii) Need and advantages of Book- Book Keeping
keeping ii) State its
Introduction to iii) Definition of Accounting objectives,
7.0 (A) Book-Keeping iv) Difference between Book- features merits 3
and Accounting: keeping and Accounting and demerits
v) Double Entry System – main
features
vi) Advantages and disadvantages of
Double Entry System
i) Components of Computerized i) Identify
Accounting Software components of
Introduction to
ii) Need for Computerized computerized
Computerised
(B) Accounting accounting 2
Accounting
iii) Difference between Manual software
System:
Accounting and Computerised
Accounting

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 13

i) Definition i) State the

ii) Meaning of Account meaning and
iii) Classification of Accounts: rules of Debit
8.0 Transaction: - Traditional Approach and Credit 2
- Modern Approach
iv) Meaning of Debit and Credit
v) Rules of Debit and Credit
Intended
Chapter Content Duration
Chapter Title Learning
No. (in hours)
Outcomes
i) Meaning Journal i) Record
ii) Recording of Transactions in business
Journal transactions
iii) Meaning of Ledger under double
Journal and iv) Objectives and utility of Ledger entry system in
9.0 4
Ledger v) Posting and balancing of Ledger books of
vi) Distinction between Journal and accounts
Ledger
vii) Names of different Books of
Accounts
i) Meaning and importance of Cash i) Differentiate
Book different types of
ii) Characteristics and advantages Cash Book
of Cash Book ii) Record
iii) Discount – Trade Discount and transactions in
Cash Discount Cash Book
10.0 Cash Book: iv) Different types of Cash Book: 4
- Single Column Cash
Book
- Double Column Cash
Book
- Triple Column Cash
Book

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 14

v) Bank Reconciliation Statement –

Basic idea
i) Meaning and objects of Trial i) Explain
Balance meaning and
Trial Balance & ii) Main features and advantages of features of Trial
11.0 Errors in Trial Balance balance 3
Accounting: iii) Preparation of Trial Balance
iv) Types of errors in Accounting

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 15

Intended
Chapter Content Duration
Chapter Title Learning
No. (in hours)
Outcomes
i) Meaning and objectives of i) Identify
Trading Account different
ii) Contents of Trading Account components of
iii) Meaning and objectives of Profit Financial
Components of and Loss Account Statements
12.0 3
Final Accounts: iv) Contents of Profit and Loss
Account
v) Meaning of depreciation, revenue
expenditure and capital expenditure
vi) Contents of Balance Sheet

Class Test 3 hrs

Total 45 hrs
9. TABLE OF SPECIFICATIONS for Engineering Economics & Accountancy

Percentage
Sl. Time allotted
Topic Weightage Comprehension
in hours Application HA
(a)
No Knowledge
(b) (c)

Introduction to
1 5 12 5 3 0 0
Economics

2 Demand & Supply 4 9 2 4 0 0

3 Production 5 12 6 2 0 0

4 Money 2 5 4 0 0 0

5 Banking Organisation 7 3 2 0 0
3

6 Pricing 2 5 2 2 0 0

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 16

Time
Percentage Compre-
Sl. Topic allotted
Weightage
in Knowledge hension Application HA
No (a) hours (c)
(b)

(A) Introduction to
7 5 0 0 0
Book-Keeping 3

7
(B) Introduction to
Computerised 2 5 3 0 0 0
Accounting System

8 Transaction 5 2 1 0 0
2

9 Journal & Ledger 4 9.5 2 2 3 0

10 Cash Book 9.5 0 5 2 0

4

Trial Balance & Errors

11 7 5 0 0 0
in Accy 3

Components of Final
12 7 2 3 0 0
Accounts 3

Total 42hrs 100 41 24 5 0

K = Knowledge C = Comprehension A = Application

A = Higher than Application (Analysis, Synthesis, Evaluation)

𝑏
C= ∑𝑏 × 100

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 17

10. Distribution of Marks:

DETAILED TABLE OF SPECIFICATIONS FOR EEA

Sl. Topic OBJECTIVE SHORT ANSWER ESSAY TYPE Grand

TYPE TYPE
No
K C A T K C A HA T K C A HA T Total

1 Introduction 3 1 0 4 2 2 0 0 4 0 0 0 0 0 8

2 Demand &Suppl 0 0 0 0 0 0 0 0 0 2 4 0 0 6 6

3 Production 1 0 0 1 2 0 0 0 2 3 2 0 0 5 8

4 Money 2 0 0 2 2 0 0 0 2 0 0 0 0 0 4

5 Banking Organis 1 0 0 1 0 0 0 0 0 2 2 0 0 4 5

6 Pricing 2 2 0 4 0 0 0 0 0 0 0 0 0 0 4

Introduction
2 0 0 2 3 0 0 0 3 0 0 0 0 0 5
to B K
7
Introd. to
3 0 0 3 0 0 0 0 0 0 0 0 0 0 3
Computer

8 Transact 2 0 0 2 0 1 0 0 1 0 0 0 0 0 3

9 Journal & Ledge 1 0 0 1 0 0 0 0 0 1 2 3 0 6 7

10 Cash Book 0 2 0 2 0 0 0 0 0 0 3 2 0 5 7

11 Trial Balance 3 0 0 3 2 0 0 0 2 0 0 0 0 0 5

12 Components F/Ac 0 0 0 0 0 0 0 0 0 2 3 0 0 5 5

Total 20 5 0 25 11 3 0 0 14 10 16 5 0 31 70

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 18

K = Knowledge C = Comprehension A = Application

HA = Higher Than ApplicationHigher than Application (Analysis, Synthesis, Evaluation)

T = Total

11 Suggested implementation Strategies: Modified syllabus may be implemented with effect from July,
2018 (Starting with the present batch (2018) of 2nd Semester students)

12 Suggested learning Resource

a. Book list
Sl. Publisher
Title of Book Name of Author(s)
No.
DhanpatRai
Publication Pvt. Ltd.
1 Introductory Micro Economics Sandeep Garg New Delhi

DhanpatRai
Publication Pvt. Ltd.
2 Introductory Macro Economics Sandeep Garg
New Delhi

B. B. Dam
R. A. Sarda Capital Publishing
Company,
3 Theory and Practice of Accountancy R. Barman
Guwahati – 5
B. Kalita

Juneja, Chawla Kalyani Publisher,

4 Book-Keeping & Accountancy
&Saksena New Delhi – 110002

Tally Solutions Pvt. Sahaj Enterprises,

5 Tally. ERP 9 For Beginners Bangalore
Ltd.

a. List of Journals
b. Manuals
c. Others

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 19

3 Course Title– Environmental Education

ENVIRONMENTAL EDUCATION

Subject Title : ENVIRONMENTAL EDUCATION

Subject Code : Me/Ch-301
Hours Per Week : 03
Hours Per Semester : 45
Class Test hrs : 03
Total hrs : 48
Full marks(Theory) : 70
Sessional Marks : 30
Class hours L T P
3 0 0

Pre requisite :None

Aim of the subject :The aim of the subject is to let the students know about the environment its importance of
study, different types of pollution , its effect on environment.

CO------Course Outcome of the subject.(Outcome based Objective)

After studying the course the students will be able to

1) Know the need of the environmental study

2) Know the importance of ecology
3) Identify the different type of pollution and its impact on the environment
4) Know about the environmental sanitation process
5) Appreciate the resource conservation like conservation of land forest and timber, wild life, minerals
6) Know about the pollution control strategies

COURSE CONTENTS

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 20

1.0 General concept

1.1 Nature and scope of environmental problems, definition.
1.2 Interaction of system.
1.3 Environmental disturbances.
1.4 Public awareness and action.
1.6 Population and economic growth.
1.7 Impact of industrialization and urbanization on environment.

2.0 Elements of ecology

2.1 Concept of ecosystem

2.2 Concept of biosphere and its components.
2.3 Energy flow in ecosystem.
2.4 Food chain in ecosystem.

3.0 Environmental Pollution

3.1 Water pollution types, source and their effects, natural recovery of water bodies, BOD, COD, DO
sag curve
3.2 Air pollution definition, types, sources and it’s effects. Air quality standards. Acid rain, Ozone
hole depletion, Green house gases and their effects, Global warming. Vehicular pollution and
prevention.
3.3 Land pollution, it’s types, sources and their effects.
3.4 Noise pollution, sources, measurements and it’s effects.
3.5 Radioactive pollution, types, sources and their effects.

4.0 Environmental Sanitation

4.1 Epidemiology- infectious diseases, factors and transmission of diseases.
4.2 Sanitary protection.
4.3 Occupational health hazards
4.4 Solid waste, sources, disposal methods.
5.0 Resource Conservation
5.1 Conservation of land, forest and timber, wildlife, minerals
5.2 Environmental Management.

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 21

5.3 Pollution control strategies.

5.4 Environmental ethics.
Table Of Specification for Environmental Education
Sl No Hrs Topic Objective Type Short Answer Type Essay Answer Type Total

45 K C A T K C A HA T K C A HA T 97
1 8 General concept 2 2 2 6 2 1 3 0 6 0 2 2 2 6 18
2 9 Ecology 2 1 2 4 2 3 3 0 8 0 2 2 2 6 18
Environmental 2
3 10 Pollution 2 3 3 8 2 2 2 8 2 3 2 2 9 25
Environmental
4 9 Sanitation 2 2 2 6 2 2 2 0 6 0 2 2 2 6 18
Reource
5 9 Conservation 1 1 3 5 1 1 2 2 6 2 2 3 2 7 18

Annexure -I Environmental Education

Time Percentage
Sl No Topic K C A HA Total(97)
Allotted(hrs) Weightage
1 General concept 8 17.80 4 5 7 2 18
3) Ecology 9 20.00 4 6 7 2 18
3 Environmental Pollution 10 22.20 6 8 8 4 25
4 Environmental Sanitation 9 20.00 4 6 6 2 18
5 ReourceConservation 9 20.00 4 4 8 4 18

REFERENCES
1. Environmental Education by Alan Reid
2. An Introduction to Environmental Education by Ezaza&Otienda Atman

XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 22

4. Course Title: Fluid Mechanics & Fluid Machines

Fluid Mechanics & Fluid Machines

Subject Title : FLUID MECHANICS & FLUID MACHINES

Subject Code : Me-302
Hours Per Week : 03
Hours Per Semester : 45
Class Test hrs : 03
Total hrs : 48
Full marks(Theory) : 70
Sessional Marks : 30
Class hours L T P
3 1 3

Pre requisite :Applied Physics, Applied Chemistry, Mathematics, Engineering Mechanics

Aim of the subject :The aim of the subject is to let the students know
1) about the different properties of the fluid ,
2) how the fluid particles behaves during statical pressure,
3) how the fluid particles behaves during flow,
4) how the different types of pump behaves with the fluid

CO--------Course Outcome of the subject.(Outcome based Objective)

After studying the course the students will be able to

1. Know the different properties of fluids

2. Calculate fluid pressureusing manometer
3. Appreciate the Archimedes’ Principle of a floating object
4. Apply Bernoulli’s theorem for solving problems on discharge
5. Calculate the Coefficient of discharge of a Venturi-meter and a notch
6. Solve problems on head loss for both pipe flow and open channel flow
7. Identify the components of pumps and hydraulic turbines
8. Solve small problems on hydraulic turbines and pump.

1 INTRODUCTION

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 23

1.1 Introduction of fluid mechanics

1.2 Definition _solid, liquid & gas
1.3 Classification of Fluid: Ideal & real fluids
1.4 Units & dimensions
2 PHYSICAL PROPERTIES OF FLUIDS

2.1 Specific weight, mass density, specific gravity, compressibility

2.2 Viscosity, Newton’s law of viscosity, kinematic viscosity, dimensional formula and units of viscosity
2.3 Surface tension, cohesion & adhesion
2.4 Newtonian& Non Newtonian fluid
2.5 Problems related to 2.1 & 2.2

3 FLUID STATICS

3.1 Pressure( atmospheric, absolute & gauge)

3.2 Transmission of pressure (Pascal’s law & its application)
3.3 Hydrostatic law (Pressure, specific weight & height relationship)
3.4 Force & centre of pressure on a horizontal , vertical & inclined submerged surface with deduction
3.5 Archimedes’ principle, stability of immersed & floating bodies, metacentre & determination of metacentric
height (Simple problems related to 3.2,3.4 to 3.5)

4 FLUID KINEMATICS

4.1 Classifications of fluid flow ( laminar & turbulent), steady & unsteady, uniform & non uniform, compressible
& non compressible, rotational &irrotational
4.2 Flow rate & Continuity equation
4.3 Bernoulli’s equation including its modification
4.4 Total Energy & Hydraulic gradient (simple problems related to 4.2 & 4.3)

5 FLUID MEASUREMENTS

5.1 Piezometer
5.2 Description & working principle of simple Tube manometer, differential manometer

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 24

5.3 Definition & relation of co efficient of contraction, coefficient of velocity & co efficient of discharge & vena
contracta
5.4 Working principle & use – Venturimeter, Orificemeter&Pitot tube
5.5 (Simple problems on 5.2, 5.3,5.4)
6 PIPE & OPEN CHANNEL FLOW

6.1 Flow losses in pipes (at entrance,exit, contraction, expansion & bending) only empirical formula
6.2 Laws of fluid friction
6.3 Darcy’s equation for head loss due to pipe friction ( Simple problems on 6.2 & 6.3)
6.4 Chezy’s&Manning’s formula ( No deductions & problems only) .
7 FLUID MACHINES : IMPACT OF JET
7.1 Direct impact of a jet on a stationary flat plate
7.2 Direct impact of a jet on an inclined fixed plate
7.3 Impact of a jet on a moving plate
7.4 Impact of a jet on a series of flat vanes mounted on the periphery of a large wheel
7.5 All related problems

8 HYDRAULIC TURBINES
8.1 Classification – Impulse & Reaction
8.2 Pelton wheel – components, working principle, velocity diagrams, work done, power,efficiency.
8.3 Francis turbine – components, working principle, velocity diagrams, work done, power, efficiency.
(PROBLEMS)
8.4 Kaplan turbine- components
8.5 Governing of an impulse turbine (Pelton wheel)
8.6 Difference between impulse & reaction turbine

9 PUMPS
9.1 Classification of pumps
9.2 Reciprocating pump – Types
9.3 Working principle ( single acting & double acting), discharge, slip, pump work, power required, indicator
diagram ( Simple related problems)
9.4 Use of air vessels
9.5 Advantages & disadvantages of reciprocating pump over centrifugal pump
9.6 Centrifugal pump – types

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 25

9.7 Working of the pump, methods of converting the K.E of water leaving the impeller into pr. Energy, guide
blades, priming
9.8 Work done by the impeller, the manometric head, the manometric efficiency. Impeller power, the
mechanical efficiency., the overall efficiency.,
9.9 Multistage centrifugal pumps ,specific speed of centrifugal pumps
9.10 Problems
Table Of Specification for Fluid Mechanics & Fluid Machines Total
Sl No Hrs Topic Objective Type Short Answer Type Essay Answer Type 97
45 K C A T K C A HA T K C A HA T
1 1 Introduction 1 1 1 3 0 0 0 0 0 0 0 0 0 0 3
Physical
Properties of
2 3 Fluids 1 1 0 2 0 2 2 0 4 0 0 0 0 0 6
3 6 Fluid Statics 1 1 0 2 0 1 2 0 3 0 0 4 4 8 13
4 6 Fluid Kinematics 1 0 1 2 0 1 2 1 4 0 0 3 4 7 13
Fluid Pressure
5 6 Measurement 2 0 0 2 0 0 1 2 3 0 0 4 4 8 13
Pipe Flow & Open
6 6 Channel Flow 0 2 0 2 0 0 2 1 3 0 0 4 4 8 13
7 5 Fluid Machine 0 0 2 2 1 0 2 0 3 0 4 0 4 8 10
Hydraulic
8 6 Turbines 1 1 0 2 1 2 0 0 3 0 4 4 0 8 13
9 6 Pumps 1 1 0 2 1 1 1 4 6 0 4 4 0 8 13

Annexure -I Fluid Mechanics and Fluid Machines

Time Percentage
Sl No Topic K C A HA Total(97)
Allotted(hrs) Weightage
1 Introduction 1 2.22 1 1 1 0 3
2 Physical Properties of Fluids 3 3.66 1 3 2 0 6
3 Fluid Statics 6 13.33 1 2 6 4 13
4 Fluid Kinematics 6 13.33 1 1 6 5 13

5 13.33
Fluid Pressure Measurement 6 2 0 5 6 13
Pipe Flow & Open Channel
6 13.33
Flow 6 0 2 6 5 13
7 Fluid Machine 5 11.11 1 0 4 4 10
8 Hydraulic Turbines 6 13.33 2 3 4 0 13
9 Pumps 6 13.33 2 2 5 4 13

Books and References:

1. Hydraulics by R H Khurmi
2. Fluid Mechanics by Jain

-----------XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX--------

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 26

4. Course Title: Fluid Mechanics & Fluid Machines Laboratory

Fluid Mechanics &Fluid Machine Laboratory

Weekly hrs 03

Total hrs 45

Sessional Marks 25

Viva Marks 25

Total 50

Outcome based Objectives:

After performing the experiments the students will be able to

1. Appreciate the use of Archimedes’ Principle

2. Verify Bernoulli’s Theorem

3. Calculate Discharge using Venturimeter

4. Calculate Discharge using Notch

5. DeterminePipe friction using Darcy’s formula

6. Determine the Forces of jet on fixed and moving plate

7. Know the function of Centrifugal pump

8. Determine the type of flow in a pipe, laminar or turbulent using Reynold’s Apparatus

Course content

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 27

1. Measurement of meta centric height of a floating ship model

2. Experiment on Bernoulli’s theorem
i) Using Bernoulli’s Apparatus
3. Determination of coefficient of discharge by using
i) Orifice meter
ii) Venturimeter
iii) Notch
4. Pipe Friction
i) Determination of friction factor ‘f’ in pipe flow
ii) Determination of minor losses in pipe flow
5. Force of jet
i) Determination of force of jet on a fixed and moving plate
6. Centrifugal pump
i) Determination of pressure head

7. Determination of Laminar flow or Turbulent flow

i) Reynolds’ Apparatus

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 28

5. Course Title– Fundamental of Electrical & Electronics Engineering

1. Course Code :- El/Et-304

2. Semester :- 3rd
3. Duration of Exam= 3 hrs
4. COURSE OUT COME (CO)
On completion of the course, the student will be able to:
 Definecurrent, voltage, insulator, conductor etc.
 Solve numerical problems using Kirchhoff’s law.
 Operate motor and generator.
 Explain briefly the alternating current and transformer
 Explain the use of semiconductor and transistor.
 Guide house wiring
 Explain the fundamental concept of digital electronics correlated to microprocessor with its applications.
CO s and ILOs
CO s ILO s
CO -1. define current, voltage, 1. Define conductor, insulator, and semiconductor with examples.
insulator, conductor etc 2. Define current, voltage, resistance, capacitance
3. Describe the Ohm’s law
4. Solve problems related to Ohm’s law

CO-2 Solve numerical problems 1. Explain DC network.

using Kirchhoff’s law 2. Define and explain the Kirchhoff’s current and voltage law
3. Solve of critical problems by using Kirchhoff’s current and
voltage law
4. Use of Wheatstone bridge
5. Determine of unknown resistance by Wheastone bridge

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 29

CO s ILO s
CO-3 operate motor and generator 1. Define DC generator and motor
2. Explain the construction of DC generator and motor
3. Explain the working principle of DC generator and motor
4. Compare the DC motor and generator
5. Enumerate different types of DC motor and generator
6. Explain use of DC generator and motor
CO -4 Explain briefly the 1. Define amplitude, time period, frequency, equation of
alternating current and transformer alternating voltage and current, RMS, average value,
instantaneous value, peak factor.
2. Explain RLC circuit
3. Explain inductance of AC circuit
4. Solve numerical problems
5. Explain construction of transformer
6. State operating principle of transformer
7. State type and uses of transformer
8. State step up and step down transformer
CO5- Explain the use of 1. Define semi conductor, energy band, intrinsic and extrinsic
semiconductor and transistor semi conductor
2. Doping of semi conductor
3. Explain P-type, N-type semiconductor,
4. Define PN junction diode, forward and reverse biased diode,
5. Explain diode characteristics, application of PN junction diode
like Half-wave, Full-Wave rectifier.
6. Explain Transistor: Physical construction of bipolarPNP and
NPN transistor.
7. biasing circuit configuration
8. Explain different mode of transistor (CE, CB, CC).
9. State the application of transistor as an amplifier.
10. State elementary ideas of display - LED, LCD, Seven segment
display.

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 30

CO s ILO s
CO-6 guide house wiring 1. Define house wiring
2. Explain different methods of house wiring
3. State the safety and precautionary measure to be taken for
electrical shock.

CO-7 Microprocessor 1. Explain the various symbolic representation of logic gates,

combinational logic, basic operation of flip-flops, counters and
registers.
2. State the fundamental concept of microprocessor and its
application in instrumentation, 8085 microprocessor and its
operation.

5. Teaching Scheme ( in hours/week)

Lecture Tutorial Practical Total

3 3 6

6. Examination Scheme :-

Theory Pass marks Practical Pass marks Total Credit

( ESE+SS) (PT+PA) marks
(Th+ Pr)
ESE Sessional (SS) PT PA
TA HA
70 10 20 33/100 25 25 17/50 150 4

7. Detailed Course Content

Chapter Chapter Title Content Duration (in

No hours)
1 Introduction Basics of Electricity: Revision of insulators and 4
conductors and their examples ,Definition and units of

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 31

voltage, current, resistance, inductance, capacitance,

different voltage sources, Ohm’s law, series & parallel
combination of resistance .
Chapter Chapter Title Content Duration (in
No hours)
2 DC network DC network: Kirchhoff’s Law, solving network problem
to find current and voltage, Wheatstone bridge and Its
problem. 5
3 Generator & Faradays laws of electromagnetic induction, Flemings 4
motor right hand and left hand rule
D.C. generator and motor: Construction, operating
principle, types, uses.
4 AC fundamental A. C. Fundamentals: 5
Basic terms-cycle, amplitude, time period, frequency,
equation of alternating voltage and current, RMS, average
value, instantaneous value, peak factor, form factor, simple
problem
5 AC circuit R-L-C series circuit: AC through resistance, capacitance, 4
inductance and their combinations, expression for
impedance, reactance, current, power factor, simple
problem.

6 Transformer Transformer Construction, operating principle, types and 4

uses.
7 Semiconductor Semiconductor: Definition of semiconductor, energy 5
band diagram, intrinsic and extrinsic semiconductor,
doping, P-type, N-type semiconductor, PN junction diode,
forward and reverse biased diode, diode characteristics,
application of PN junction diode like Half-wave, Full-
Wave rectifier.

8 Transistor Transistor: Physical construction of bipolar PNP and NPN 5

transistor, biasing circuit configuration

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 32

(CE, CB, CC). Application of transistor as an amplifier.

Elementary ideas of display - LED, LCD, Seven segment
display.
9 House wiring 9.1 Introduction to house wiring 2
9.2 Methods of house wiring
9.3 Safety and precautions measures against electrical
hazard.
Chapter Chapter Title Content Duration (in
No hours)
10 Microprocessor 1. Symbolic representation of logic gates, combinational 5
logic, basic operation of flip-flops, counters and registers.
2. Fundamental concept of microprocessor and its
application in instrumentation, 8085 microprocessor and
its operation.

11 Class test Two class test 2

8. Distribution of Marks/ Table of specifications

Sr. Topic Time allotted in Percentage A HA

C
(a) hours Weightage
No K

(b) (c)

1 Introduction 4 9 3 0 0

2 DC net work 5 11 3 0 4

3 Generator & motor 4 9 3 0 5

4 AC fundamental 5 11 4 3 4

5 AC circuit 4 9 3 1 4

6 Transformer 4 9 3 3 1

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 33

7 Semiconductor 5 11 3 1 3

8 Transistor 5 11 3 2 1

9 House wiring 2 4 2 0 4

10 Microprocessor 5 11 4 0 3

Sr. Topic Time allotted in hours Percentage K C A HA

No
Weight age
(a) (b)
(c)

11 Class test 2 4

Total  b=45 100 31 10 29

K = Knowledge C = Comprehension A = Application

HA = Higher Than Application (Analysis,Synthesis, Evaluation)

𝑏
C= × 100
∑𝑏

10. Details Table of Specification for Theory

Sl. Topic OBJECTIVE TYPE SHORT/ DESCRIPTIVE

no ANSWER TYPE
K C A T K C A HA T

1 Introduction 1 1 2 2
2 DC net work 1 1 2 2 3 5

3 Generator & motor 1 2 3 2 3 5

4 AC fundamental 2 1 1 4 2 2 3 7

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 34

5 AC circuit 1 1 1 3 2 3 5
6 Transformer 1 1 2 2 3 5
7 Semiconductor 1 1 1 3 2 2 4
8 Transistor 1 1 1 3 2 1 3
9 House wiring 1 1 2 1 3 4
10 Microprocessor 1 1 2 3 2 5
Total 25 45

K = Knowledge C = Comprehension A = Application HA = Higher

Than Application
T = Total

N.B.:- 1. The question pattern will be as per the instruction of SCTE or as per existing rules.

2. The objective type questions may be in the form of multiple choice, fill up the blanks, true or false or very

short answer type.

3. Optional question (if any) may be from the same topic in the form of either or type like below

QNo. Explain the properties of conductor

Or

Explain the properties of insulator

11. Suggested Implementation Strategies:- Teacher will use Black board, OHP, LCD Projector, Smart board,
Video etc for effective teaching learning process .
12. Ref Books:

I. A text book of Electrical Technology Vol – I, B. L. Theraja& A. K. Theraja, S. Chand.

II. Principle of Electronics, V. K. Mehta, S. Chand.
III. Electronic Principle, A.P. Malvino, Tata McGraw-Hill
IV. Electronic Devices & Circuits, Millman&Halkias, Tata McGraw-Hill

#####################################

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 35

5. Course Title: - Fundamental of Electrical & Electronic Engineering

(Practical)

1. Course Title: - FUNDAMENTAL OF ELECTRICAL &ELECTRONICS ENGINEERING

2. Course Code: - El/Et-304

3. Semester: - 3rd

INTELLECTUAL SKILLS

a. Identify the properties of generator, ammeter, voltmeter, transformer

b. Interpret the working principle of equipment
c. Interpret the test results
d. Follow the IS procedure of testing

MOTOR SKILLS

a. Measure the quantities accurately

a. Identify the instruments properly

b. Handle the equipment carefully.

LIST OF PRACTICAL( Students are to perform minimum six experiments)

1. Verification of KCL and KVL

2. Study of DC shunt generator.
3. Milli ammeter as a Voltmeter.
4. Milli voltmeter as an ammeter.
5. Study of RLC series circuit.
6. Study of single phase transformer.
7. Determination of semi-conductor diode characteristic.
8. Study of transistor configuration ( CE,CB.CC ) ( Project base)
9. Study of transistor as an amplifier. ( Project base)
10. Hands on activity on house wiring ( Mini project work on simple house wiring involving one light point,
one fan point, one power socket, one MCB on a wooden or ply board

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 36

6. Course Title: Manufacturing Technology - I

MANUFACTURING TECHNOLOGY – I

Subject Title : Manufacturing Technology - I

Subject Code : Me-303
Hours Per Week : 03
Hours Per Semester : 45
Class Test : 03
Total hrs : 48
Full marks(Theory) : 70
Sessional Marks : 30
Class hours L T P
3 0 3
Pre requisite :None

Aim of the subject: The aim of the subject is to let the students know about the different tools used in finishing the
machining processes and how the machines are used for production from raw metal to the final product. It will
also help to know different mechanicalmanufacturing process of metals.
CO COURSE OUTCOME

After studying the course the students will be able to

1. Identify the tool angles of a single point cutting tool used in lathe machine
2. Identify the different chips in machining process
3. Know about the metal casting process, pattern making and moulding
4. Know the use of resistance and arc welding
5. Know the press operation like bending, cutting, drawing, punching
6. Appreciate the use of cutting fluids and coolants

CONTENTS:
1.0 Basic of Machine Tools
1.1 Introduction to machine tools.
1.2 Differences between machine and machine tools
1.3 Types of cutting tools

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 37

1.4 Cutting tool materials-properties and types.

1.5 Single point cutting tool nomenclatures.
1.6 Cutting tool life and factors effecting tool life and tool wear.
1.7 Orthogonal and Oblique cutting.
1.8 Cutting forces in orthogonal and oblique cutting
1.9 Chip formation process, temperature zone and forces.
1.10 Types of chips and factors for producing each chip.
1.11 Chip breaker and its types.

2.0 Metal Casting Process

2.1 Introduction to metal casting
2.2 Casting: steps involved in casting
2.3 Pattern for casting
2.4 Pattern making materials
2.6 Moulding- Moulding sand-Moulding process
2.7 Special casting processes - Die casting, Centrifugal casting & Investment casting.
2.8 Defects in casting and their remedies
3.0 Advanced Welding Processes
3.1 Introduction.
3.2 Classification of welding process
3.3 Resistance welding - Spot, Seam and Projection welding
3.4 Advanced Arc welding types-Shielded metal arc welding, TIG & MIG welding,Submerged arc
welding, Plasma arc welding & Laser beam welding.
3.5 Defects in welding and their remedies
3.6 Differences between Brazing and Soldering.
4.0 Press Work
6.1 Introduction.
6.2 Presses-Types-Power press
6.3 Press operations: Cutting, bending, drawing, punching, blanking & notching,
5.0 Powder Metallurgy
7.1 Basic concepts of powder metallurgy.
7.2 Methods of powder metallurgy.
7.5 Applications, merits and limitations of powder metallurgy.
6.0 Cutting Fluids and Coolants

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 38

8.1 Introduction.
8.2 Purpose and Properties.
8.3 Coolants and lubricants for different operations

Table Of Specification for Manufacturing Technology I Total

Sl No Hrs Topic Objective Type Short Answer Type Essay Answer Type 97
45 K C A T K C A HA T K C A HA T 13
1 6 Basic Machine Tools 2 2 1 5 0 2 1 0 3 0 2 2 2 6 14
Metal Casting
2 10 Process 2 2 2 6 2 3 2 0 7 0 5 2 4 11 24
3 10 Welding Process 2 2 2 6 2 3 2 0 7 0 5 4 2 11 24
4 8 Press Work 1 2 0 3 1 2 2 0 5 0 2 0 0 2 10
Powder
5 5 Metallurgy 1 2 0 3 1 2 3 0 6 0 2 0 0 2 11
Cutting Fluids and
6 6 Coolants 2 0 1 3 0 2 2 0 4 0 4 0 3 7 14

Annexure -I Manufacturing Technology-I

Time Percentage
Sl No Topic K C A HA Total(97)
Allotted(hrs) Weightage
1 Basic Machine Tools 6 13.33 2 6 4 2 14
2 Metal Casting Process 10 22.22 4 10 6 4 24
3 Welding Process 10 22.22 4 10 8 2 24
4 Press Work 8 17.78 2 6 2 0 10
5 Powder Metallurgy 5 11.11 2 6 3 0 11
6 Cutting Fluids and Coolants 6 13.33 2 6 3 3 14

REFERENCE BOOKS:
1) Workshop Technology by Hazara Chaudhary VOL - I & VOL – II.
2) Production Technology by Dr.P.C.Sharma., S Chand & Co
3) Workshop technology by B.S. Raghuvanshi
4) Introduction to Manufacturing Processes, P N Rao , Vol 1 &Vol II, Tata Mc Grew Hill Publications
5) Manufacturing Process- I & II & III- By Dr. Radhakrishna K
6) Production Technology by R.K.Jain.
7) Manufacturing Technology I &II , Dr P C Sharma , S Chand & Co
8) Manufacturing Technology - P P Date , Jaico Publishing House
9) Foundry Technology –Dr. Radhakrishna.

XXXXXXXXXXXXXXXXXXXXXXX

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 39

6. Course Title: Manufacturing Technology Laboratory

Manufacturing Technology - I- Lab

Hours Per Week : 03

Hours Per Semester : 45

Total hrs : 48

Sessional Marks : 25

Viva Marks : 25

Outcome Based Objectives

After performing the practical the students will be able to

1. Know the various types of cutting tools

2. Know the nomenclature of a single point cutting tool
3. Prepare a mould sand mix
4. Handle the electrode holder for laying welding beads

Course Content

1. Machining
1.1 Draw the single point cutting tool and label various parts
1.2 Ground the various angles according to single point cutting tool nomenclature on a rectangular work
piece

2. Foundry, Moulding and casting of

2.1 solid bearing

2.2 flange coupling
2.3 split bearing
2.4 connecting rod
2.5 V pulley
2.6 Gear pulley
2.7 Core making
SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 40

3. Welding
3.1 Lay out of beads
3.2 Butt joints
3.3 Lap joints
3.4 T- joint
3.5 H – joints
3.6 Angular joints
3.7 Two joints

………………………………….XXXXXXXXXXXXXXXXXXX-------------------

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 41

7 Course Title: Professional Practice-I

COURSE TITLE: PROFESSIONAL PRAVTICE-1
COURSE CODE : AU 310
SEMESTER : 3th Semester
Contact hours : 30

Rationale : To develop general confidence, ability to communicate and attitude, in addition to basic
technological concept through industrial visit, expert lectures, seminar on technical topics
and group discussion.

Course Outcome:

Oncompletion of this course students will be able to-

1. Acquire information from various sources.

2. Prepare notes for given topic.
3. Technical presentation on given topic in a seminar.
4. Interact with peers to share thought
5. Prepare report on industrial visit, expert lecture.

Study Scheme(Contact hours/ week)

Lecture Tutorial Practical Total
1 - 2 3

Evaluation Scheme: Total Credi

Marks(Theory t
+ Sessional)
Theory Practical
ESE Sessional Pass Practical Practical Pass
TA HA Total ESE+SS Test (PT) Assessment (PT+PA)

(TA+HA) (PA) 33/ 100 2

25 25 17/50

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 42

Details of Contents (Activities):

1. INDUSTRIAL VISITS: 12
Structured industrial visits be engaged and report of the same should be submitted by the individual
student, to form part of the term work.
Visit any two of the following:
1. Public Water supply pumping station
2. Hydroelectric power plant
3. Engineering workshop/machine Shop(Layout, machines)
4. Diary plants/Water treatment
2. GUEST LECTURE(S): 3
Lectures by Professional/Industrial expert/Student Seminar based on information search to be organized
from any three of the following areas:
1. Computer networking and Security
2. Electric hazards, Fire Fighting/ safety Precaution and first aids.
3. Topic related to social awareness such as- Career opportunities, communication in industry, Yoga &
meditation, Aids awareness and health awareness.

3. GROUP DISCUSSION: 5

The students should discuss in a group of six to eight students and write a brief report on the same as a part
of team work. Two topics for groupdiscussions may be selected by the faculty member. Some of suggested topics
are:

1. Sports
2. Current affairs
3. Discipline and House keeping
4. Current topic related to Engineering field.

4. STUDENT ACTIVITY: 10

The students in group of 3 to 4 perform any one of the following activities (others similar activities may be
considered Activity):

1. Collect and study IS code for engineering Drawing.

2. Collect information from market: Nomenclatures and specification of engineering materials.Collect
specification of machine tools.Survey of data regarding different types of pumps with specifications from

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 43

manufacturer’s catalogue, local markets, end users (any other engineering products may be considered for
survey).
xxxxxxXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXxxxxxxx

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 44

4TH SEMESTER

COURSE STRUCTURE OF 4th SEMESTER MECHANICAL (AUTOMOBILE) ENGINEERING

Sl No Code No. Subject Study Scheme Evaluation Scheme

(Contact Theory Practical Total Credit
Lhours/week)
T P ESE Sessional (SS) Pass(ES Practical Practical Pass Marks(T
TA HA Total Assessm
Test (PT+ heory+Pr
(TA+ ent(PA)
HA) E+SS) (PT) # @ PA) actical)
1 Au-401 Automobile Engines 3 - 70 10 20 30 33/100 100 3
2 Au-402 Auto Workshop Practice-I - 6 100 50 50/150 150 4
3 Me-401 Thermodynamics 3 - - 70 10 20 30 33/100 - - 100 3
4 Me-403 Manufacturing Technology-II 3 3 70 10 20 30 33/100 25 25 17/50 150 4
5 Me-404 Theory of Machines 3 - 3 70 10 20 30 33/100 25 25 17/50 150 4
6 Me-405 Strength of Materials 3 1 3 70 10 20 30 33/100 25 25 17/50 150 5
7 Au-410 Professional Practice- II 1 2 25 25 17/50 50 2
16 1 17
Total 850 25
34

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 45

COURSE TITLE : AUTOMOBILE ENGINES

COURSE CODE : AU 401
SEMESTER : 4th Semester
Contact hours : 45

Rationale : Engine is the heart of an automobile. This course is developed to make the
student understand the detailed construction and working of automotive engines,
and the different engine systems.

Course Outcome:

On completion of this course students will be able to-

1. Define basic engine terminologies.

2. Classify different types of engines.

3. Understand the construction and working of automobile engine.

4. Compare different types of engines and engine systems.

5. Understand construction and working different engine systems i.e. fuel system, lubrication system, cooling
system and ignition system.

6. Understand causes and remedies of engine troubles.

Study Scheme(Contact hours/ week)

Lecture Tutorial Practical Total
3 - - 3

Evaluation Scheme: Total Credi

Marks(Theory t
+ Sessional)
Theory Practical
ESE Sessional Pass Practical Practical Pass
TA HA Total ESE+SS Test (PT) Assessment (PT+PA)
(TA+HA (PA) 33/ 100 3
)
70 10 20 30 33/100

Detailed Course Content:

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 46

1.0 Introduction: 1
History, Importance of Automobile in our daily life, types of vehicles.
2.0 Introduction of Petrol Engine and Diesel Engine: 8
2.1 Classification of IC Engines, according to arrangement of cylinders, valve arrangement, working
cycle, fuel used, speed, nature of thermodynamic cycle, arrangement of valves, method of cooling,
field of application, methods of fuel ignition of petrol and diesel engines. Running in period.
2.2 Two-stroke petrol engine and two-stroke diesel engines, their uses, advantages, disadvantages and
comparison.
Difference between two stroke petrol engine and two stroke diesel engine.
2.3 Scavenging: Definition and necessity of Scavenging, cross flow, back flow, uniflow scavenging,
scavenging of four-stroke engine.
2.4 Engine liners: Dry and Wet liners, their construction and uses, advantages and disadvantages.
2.5 Gaskets- classification of engine gaskets, gaskets material, various types of gaskets used in
automobile vehicle, general gasket installation procedure.

3.0 Diesel and Petrol engines, their parts and function: 4

3.1 Constructional details of parts, material used and functions of cylinder block, cylinder head,
crankcase, crankshaft, camshaft, piston, piston rings, piston pin ,flywheel, connecting rod, bearings,
valves, inlet and exhaust manifolds.
3.2 Valve mechanism: Types of valve mechanism, function and working of each valve mechanism,
valve timing, valve overlap, tappet clearance.
4.0 Fuel system of Petrol Engine: 5
4.1 Fuel system:- line diagram of petrol engine fuel system, components, constructional details of fuel
tanks, fuel lines, working principles with constructional details of mechanical and electrical fuel
pumps, fuel filter:- types and necessity.

4.2 Carburetors: - Atomization and vaporization of fuel or gasoline, carburation, simple carburetor,
Working principle and constructional details, choke, venturi, float, needle valve, throttle valve,
tickler, air fuel ratio, rich mixture, lean mixture, and economic ratio. Stoichiometric ratio.

4.3 Circuits of Modern carburetor: Introduction of starting circuit, float circuit, idling and low speed
circuit, high speed part load circuit, high speed full power circuit, accelerating pump circuit etc.

4.4 Electronic fuel injection: Types of fuel injection viz. PFI, EFI, TBFI ,GDI, sequential fuel injection
system(SFI), constructional layout, details and function of each system, fuel injectors for electronic
injection system, cold start injector- constructional detail and function of injectors and their types.
4.5 Sensors: - Types of sensors- Their functions:- variable resistor-type sensor, generating sensors, CP
sensor, boost pressure sensor, MAF sensor, MAP sensor, oxygen sensor, vehicle speed sensor,
knock sensor, etc., advantages and their locations.
5.0 Ignition system:- 4

5.1 Battery or coil ignition, magneto ignition, electronic ignition system, comparison between them,
circuits of the said systems, voltage necessary for ignition, ignition in single cylinder and multi
cylinder engines, firing order, functions of distributors, ignition coil, condenser, spark plug, types

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 47

of spark plugs use in various engines, ignition advance mechanism, types of advance mechanism,
effects of enhancing and retarding of ignition.

5.2 Electronic ignition system:- Types , circuit diagrams, details of all elements of electronic ignition
system , working principle ,uses ,advantages and disadvantages.

6.0 Fuel system of diesel engines: 5

6.1 Combustion in C.I. engines, type of injection system- air injection, solid injection, unit injection,
CRDI.
6.2 Fuel supply system: Line diagram of fuel supply system , fuel tank, fuel feed pump, fuel filter, fuel
injection pumps and its type, components, operating principles and mechanism,
6.3 Injections:- types and component/ parts, nozzle and its types, fuel pump, governors and control
system, Types of governor- mechanical governor, pneumatic governor, functions and working
principle.
7.0 Intake and Exhaust system: 3
7.1 Air cleaner, types and functions. Intake and exhaust manifolds, Silencer and its type, used in various
vehicles.
8.0 Lubrication: 5
8.1 Functions of lubricants, lubricating parts of an engine. Properties of lubricant:- physical and
chemical properties of lubricants, viscosity, viscosity index ,specific gravity, flash points, fire
points, pour points etc. Rating of lubricant, SAE no.API .
8.2 Lubrication system: - Petroil system, splash system, pressure system, forced feed lubrication, dry
sump, wet sump lubrication methods, oil-filters, types of filters, full flow; by pass filters, crankcase
ventilation and blow-by.
Lubricating oil pumps: - types, function and their construction.
9.0 Cooling system:- 4
9.1 Necessity of engine cooling, overheating and under cooling.
9.2 Types of cooling, Air cooling- constructional details and functions, liquid cooling system: types,
thermo siphon system, pump circulating cooling system or forced circulation system, constructional
details of the system.Description of water pumps, radiators, thermostat valve, water jackets etc.,
types and functional details, coolant, antifreeze agents, rust inhibitors.
10.0 Supercharging: 2
10.1 Introduction, application and type of supercharging: centrifugal, vane type, blower type etc. turbo
supercharger and its types and uses in various engines.
11.0 Class Test: 3

Reference Books, Journals:

1. M. L. Mathur& R. P. Sharma: Internal Combustion Engine, DhanpatRai Publications
2. C. P. Nakra: Basic Automobile Engineering, DhanpatRai Publications
3. Crouse &Anglin: Automotive Mechanics
4. Dr. KripalShing : Automobile Engineering Vol. 1
5. Journal of Society of Automotive Engineers

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 48

K = Knowledge C = Comprehension A = Application HA = Higher

Than Application T = Total

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 49

COURSE TITLE: AUTO WORKSHOP PRACTICE-I

COURSE CODE : Au 402
SEMESTER : 4th
Contact hours : 90

Rationale : This course makes the student to acquire practical knowledge of construction of
automobile engines and helps to develop skill to complete overhauling an engine.

Course Outcome: After completion of this course students will be able to:

1. Demonstrate the procedure of complete overhauling of automobile engine and engine systems.
2. Demonstrate the construction and working of automobile engine and engine systems.

Evaluation Scheme: Credit

Study Scheme(Contact hours/ week) Practical

L T P Practical Test Practical Pass (PT+PA)
(PT) Assessment (PA)
4

0 0 6 100 50 50/150

DETAILS OF CONTENTS:

Safety precautions: 3

1.1 Safety precautions to be followed and knowledge of first aid in an automobile

workshop.
1.2 Study of hand tools, different gauges and their use. Identification of general tools and equipment
in an automobile workshop and their purpose.
2.0 Overhauling of a multi cylinderpetrol engine: 27
2.1 Procedure of Engine down from an Automobile Vehicle.
2.2 Dismantling of a multi-cylinderpetrol engine:-
Note the procedure of dismantling the parts, clean the parts, listing the parts sequence wise,
observing the parts for their condition, thereby make a list for defective parts, reassemble and start
the engine again.
Tune up the engine (complete overhauling of the carburetor), Setting of the CB point, spark plug,
and tappet clearance.
2.3 Overhauling of lubrication system, cleaning of oil gallery, servicing
of oil pump, setting of oil pressure and cleaning, changing of oil filters.
2.4 Complete servicing of cooling system.
2.5 Study of fuel system of multi-cylinder petrol engine.
2.6 Study of mechanical and electrical fuel feed pump.
2.7 Study of fuel injection system of petrol engine (MPFI, GDI etc.)
SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 50

2.8 Adjustment of valve timing.

2.9 Overhauling of conventional and electronic ignition system of petrol engine.

3.0 Overhaulingof a single cylinder engine: 15

3.1 Overhauling of a single cylinder two stroke engine, setting of engine timing, spark plug gap etc.

3.2 Servicing of the fuel system, cleaning and replacing the fuel filter.
3.3 Tune up the engine after overhauling and start the engine again.
4.0 Overhauling of multi cylinder diesel engine: 27

4.1 Dismantle a multi cylinder (Diesel) engine. Note the procedure of dismantling the parts, cleaning,
and assemble with proper specification.
4.2 Overhauling of fuel system.
4.3 Servicing of injector.
4.4 Re-assemble the parts and start the engine after rectification of the defects.

5.0 Study&inspection of Inlet and Exhaust system. Replacing exhaust system components if required. 6

6.0 Studyof supercharger and turbo-supercharger. Locate and identify the turbo-supercharger in an engine.
Maintenance of turbo-supercharger. 6

7.0 Viva. 6

TABLE OF SPECIFICATIONS FOR Practical Test

Sr. Topic Time allotted Percentage K C A HA T

No (a) in hours Weightage
(b) (c)
1 Safety precautions 5
3 3% 1 0 4
2 Overhauling of a multi cylinder engine (petrol) 30
27 30% 5 5 20
3 Overhauling of a single cylinder engine 15
15 17% 2 3 10
4 Overhauling of multi cylinder diesel engine 30
27 30% 5 5 20
5 Study of inlet & exhaust system 10
6 7% 1 1 8
6 Study of turbo-supercharger 10
6 7% 1 1 8
7 Viva. 50
6 7% 10 10 30
Total  b=90 100 25 25 100 100

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 51

Reference Book, Journal, Manuals etc.:

1. C. P. Nakra: Basic Automobile Engineering, DhanpatRai Publications
2. Crouse &Anglin: Automotive Mechanics
3. N. Malhotra : Automobile Engineering Practical, Asian Publications

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 52

1: Subject Title: Thermodynamics

Subject Title : Thermodynamics

Subject Code : Me-401

Hours Per Week : 03

Hours Per Semester : 45

Class Test hrs : 03

Total hrs : 48

Pre requisite :Applied Physics, Mathematics, Engineering Mechanics

Aim of the subject :The aim of the subject is to let the students know about the different properties of the perfect
gases, different thermodynamic processes. standard cycles and its practical significance

The different properties of steam, use of steam tables, Mollierchart.,vapour cycles

Outcome Based Objectives

On the completion of the course the students should be able to:

1. Solve problems on the laws of Perfect Gases

2. Analyze the thermodynamic process

3. Know the calorific values of fuel

4. Solve problems on air standard cycles

5. Solve problems of steam generation with the help of steam tables

6. Explain the principle of Rankine Cycle

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 53

7. Know the types of heat transfer

COURSE CONTENTS

1. Fundamentals and laws of Thermodynamics.

1.1 Definitions for system - boundary, surrounding, working fluid and state of a system.
1.2 Types of thermodynamic systems – closed, open and isolated systems with examples.
1.3 Properties of system- Intensive and Extensive properties with examples.
1.4 Definitions for properties like pressure (p), Volume (v), Temperature (T), Enthalpy (H), Internal
energy (U) Specific heat at constant pressure(cp), specific heat at constant volume(CV) for a gas.
and their units.
1.5 Definitions for quasi-static work, flow- work, specific heat.
1.6 Zeroth, first, second laws of thermodynamics, simple problems on conversion of Heat into Work
and vice versa.

1.7 Steady flow energy equation (without proof),

2.0 Laws of perfect gases.

2.1 Brief explanation of perfect Gas Laws – Boyle’s law, Charle’s Law – -Gay-Lussac law-Avogadro’s
-Joule’s law .
2.2 Derive characteristic gas equation - universal gas equation, universal gas constant and their
relationship with molecular weight of gas.
2.3 Derivation for an expression showing the relationship between the two specific heats and
characteristic gas constant.
2.4 Simple problems on gas equation.

3.0 Thermodynamic processes on gases.

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 54

3.1 Types of thermodynamic processes, Constant pressure, Constant volume, Isothermal, Free
expansion, Isentropic, Polytrophic and throttling processes & equations representing the processes.

3.2 Concept of Entropy.

3.3 Derivation for work done, change in internal energy and Entropy for the above processes.

3.4 Calculation of heat supplied or rejected during the above processes.

3.5 Simple problems on the above processes.

4.0 Fuels and Combustion.

4.1 Definition of fuel. Types – solid, liquid and gaseous fuels examples and uses of different types of
fuels.

4.2 Calorific values (Higher and lower) of fuels, Dulong’s formula for calorific value. & calculation
of calorific value of a fuel of given chemical composition.

4.3 Bomb calorimeter unit-Description

5.0 Air standard cycles.

5.1 Meaning of air standard cycle-its use-Reversible and irreversible process – reversible and
irreversible cycles conditions for reversibility of a cycle.

5.2 Brief description of Carnot cycle with P.V. and T-S diagrams, Air standard Efficiency - Problems
on Carnot cycle.

5.3 Brief explanation of Otto cycle with P.V. and T-S diagrams, Air standard Efficiency - Simple
problems on Otto cycle.

5.4 Brief description of Diesel cycle with P.V. and T-S diagrams, Air standard Efficiency - Simple
problems on Diesel cycle.
SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 55

5.5 Brief description of Dual cycle with P.V. and T-S diagrams, Air standard Efficiency - Simple
problems on dual cycle.

5.5 Reasons for the highest efficiency of Carnot cycle over other cycles working between same
temperature limits.

6.0 Properties of steam.

6.1 Formation of steam under constant pressure, dryness, fraction and degree of superheat, specific
volume.

6.2 Determination of enthalpy, internal energy, internal latent heat, entropy of wet, dry and
superheated steam at a given pressure using steam tables and Mollier chart.

6.3 Simple direct problems on the above using tables and charts.

7.0 Vapour Power cycle

7.1 Rankine cycle

7.2 Modified rankine cycle

7.3 Simple problems on above

8.0 Heat Transfer

8.1 Introduction to Heat Transfer Processes.

8.2 Conduction, Convection and Radiation.

8.3 Heat Exchanger- types with diagram.

REFERENCES

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 56

1. “Fundamental of thermodynamics” by Richard E Snnatag, ClausBorgnakke, Gordon J Vanwylen, Wiley

Student edition, 6th Ed.,
2. “ Basic and applied thermodynamics” by P.K.Nag ,Tata McGraw hill New delhi 2009
3. “Heat engines(Vol-I &Vol-II)”by Patel and Karmachandani
4. “I.C.Engine Fundamentals” by Hey wood
5. “Thermal Engineering “by R.S.Khurmi
6. “Thermal Engineering” by P.L.Balaney
7. “Thermodynamics applied to heat engines”byLewitt.
8. “ Heat engines” by Pandya and shah
9. “ Thermodynamics “ Robert Ballmer , Jaico Publishing House

Table Of Specification for Thermodynamics Total Marks

Sl No Hrs Topic Objective Type Short Answer Type Essay Answer Type 97
45 K C A T K C A HA T K C A HA T
Fundamental Of
1 5 Thermodynmics 3 1 0 4 0 2 0 0 2 2 2 0 0 4 10
Laws Of Perfect
2 6 Gases 2 0 0 2 0 2 0 0 2 0 6 4 0 10 14
Thermodynamic
3 8 Process 2 2 0 4 0 2 2 0 4 0 6 4 0 10 18
Fuels &
4 4 Combustion 2 0 0 2 0 2 0 0 2 0 4 0 0 4 8
Air Standard
5 8 Cycles 2 2 0 4 0 2 2 0 4 0 4 6 0 10 18
Properties Of
6 8 Steam 2 0 0 2 0 2 2 0 4 0 8 4 0 12 18
Vapour Power
7 4 Cycles 0 2 0 2 0 0 2 0 2 0 2 2 0 4 8
8 2 Heat Transfer 1 2 0 3 0 0 0 0 0 0 0 0 0 3

Annexure -I Thermodynamics

Time Percentage
Sl No Topic K C A HA Total
Allotted(hrs) Weightage
Fundamentals of
1 11.11
Thermodynamics 5 5 5 10
2 Laws of Perfect Gases 6 13.30 2 8 4 0 14
Thermodynamic Process in
3 17.78
Gases 8 2 10 6 0 18
4 Fuels and Combustion 4 8.89 2 6 6
5 Air Standard Cycles 8 17.78 2 8 8 0 18
6 Properties of Steam 8 17.78 2 10 6 0 18
7 Vapour Power Cycles 4 8.89 0 4 4 0 8
8 Heat Transfer 2 4.40 1 2 0 0 3

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 57

Subject Title : Manufacturing Technology-II

Subject Title : Manufacturing Technology-II

Subject Code : Me-403

Hours Per Week : 03

Hours Per Semester : 45

Class Test hrs : 03

Total hrs : 48

Full marks(Theory) : 70

Sessional Marks : 30

Class hours L T P

3 0 3

Pre requisite: Engineering Mechanics, Manufacturing Technology

Aim:The aim of the subject is to understand various operation performed in lathe machine, grinding machine,
shaping machine, Planning Machine, its limitations in every machines, Importance of Jigs and fixtures, plastic
processing methods, powder metallurgy, cutting fluids.

Outcome Based Objectives :

On completion of the course the students should be able to:

1. Identify the components of a lathe machine

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 58

2. Identify the components of shaping , planning, slotting and milling machine

3. Know about the surface finishing with the help of grinding machine

4. Illustrate the machining process performed in milling machine

5. Explain about the non traditional machining methods

6. Appreciate the importance of jigs and fixtures

CONTENTS

1.0 Lathe

1.1 Introduction to lathe.

1.2 Classification of lathes -specification of lathe

1.3 Constructional features of Engine lathe ( parts)

1.4 Lathe attachments, accessories & work holding devices

1.5 Lathe operations

1.6 Taper turning methods.

1.7 Machining parameters-cutting speed, feed, depth of cut and machining time

1.8 Capstan and Turret lathe -Description-comparison with engine lathe

2.0 Drilling machine

2.1 Introduction

2.2 Classification of drilling machines

2.3 Radial drilling machine-working-drilling operations

2.4 Twist drill nomenclature

2.5 Machining parameters-cutting speed, feed, depth of cut and machining time

3.0 Shaper, Planer &Slotter

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 59

3.1 Introduction to Shaper & Classification

3.2 Specifications of Shaper

3.3 Principal parts of shaper.

3.4 Shaper Mechanisms &Shaper Operations

3.5 Cutting Speed, Feed, Depth of cut & Machining time.

3.6 Simple problems.

3.7 Introduction to Planer & Classification

3.8 Specifications of Planer

3.9 Principal parts of Planer

3.10 Planer Mechanisms & Operations

3.11 Differences between Planer & Shaper

3.12 Introduction to Slotter& Classification

3.13 Principal parts of Slotter

3.14 Specifications of Slotter

3.15 Slotter Mechanisms & Operations

3.18 Difference between Planer &Slotter.

4.0 Grinding & Surface finishing

4.1 Introduction to grinding & Classification

4.2 Plain Cylindrical grinding machines

4.3 Grinding wheels

4.4 Abrasives & classification.

4.5 Bond & bonding.

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 60

4.6 Grit, Grade & Structure of wheels.

4.7 Specification of wheels.

4.8 Types of grinding wheels.

4.9 Selection of grinding wheels.

4.10 Mounting of grinding wheels.

4.11 Glazing and loading of wheels.

4.12 Dressing and truing of wheels.

4.13 Balancing of wheels.

4.14 Diamond wheels.

4.15 Introduction to surface finish.

4.16 Surface finishing operations.

5.0 Milling machine

4.1 Introduction to milling and classification.

4.2 Column and knee type milling machine & copy milling machine.

4.3 Milling cutters and classification.

4.4 Fundamentals of milling processes

4.5 Milling machine operations.

4.6 Indexing methods.

4.7 Cutting speed, feed, depth of cut and machining time.

4.8 Gear hobbing

6.0 Non-Traditional machining methods

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 61

5.1 Introduction to modern machining.

5.2 Differences between conventional and non-conventional methods.

5.3 Classification.

5.4 Principle of working of - Ultrasonic machining, Electric discharge machining,Abrasive jet

machining and Laser beam machining.

4.5 Applications, merits and demerits of above methods.

7.0 Jigs and Fixtures

6.1 Introduction to jigs and fixtures.

6.2 Definition of jig and fixtures.

6.3 Applications & merits of jig and fixture

Table Of Specification for Manufacturing Technology II Total

Sl No Hrs Topic Objective Type Short Answer Type Essay Answer Type 97
45 K C A T K C A HA T K C A HA T Total (97)
1 8 Lathe M/C 2 3 0 5 2 3 0 0 5 0 3 5 0 8 18
2 6 Drilling M/C 1 2 0 3 2 2 0 0 4 0 2 3 0 5 12
Shaper,Planer &
3 8 Slotter 0 2 3 5 0 3 2 0 5 0 4 4 0 8 18
Grinding and
4 5 surface Finish 1 1 0 2 0 1 2 0 3 0 0 0 5 5 10
5 8 Milling Machine 2 2 0 4 0 4 4 0 8 0 3 3 0 6 18
Non Traditional
Machining
6 6 Methods 1 2 0 3 2 2 0 0 4 0 0 6 0 6 13
7 4 Jigs & Fxtures 0 2 0 2 2 0 0 0 2 0 0 4 0 4 8

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 62

Annexure -I Manufacturing Technology-II

Time Percentage
Sl No Topic K C A HA Total
Allotted(hrs) Weightage
1 Lathe Machine 8 17.78 4 9 5 0 18
2 Drilling Machine 6 13.33 3 6 3 0 12
3 Shaper, Planer and Slotter 8 17.78 0 9 9 0 18
Grinding and surface
4 11.11
finishing 5 1 2 2 5 10
5 Milling Machine 8 17.78 2 9 7 0 18
Non Traditional Machining
6 13.33
Methods 6 3 4 6 0 13
7 Jigs and Fixtures 4 8.89 2 2 4 0 8

XXXXXXXXXXXXXXXXXXXXXXXX

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 63

3: Manufacturing Technology –II Lab

Outcome Based Objectives

After performing the Practical in the laboratory , the students will be able to

1. Perform turning operation on a lathe machine

2. Perform the drilling operation on a drilling machine.

3. Identify the components of shaping, planning , slotting and milling machine

4. Know the safety and precaution taken during a machining operation in a workshop

5. Know how to operate and maintenance of the machine

1. Course content
1. Machine shop(turning)
1.1 Plain Turning
1.2 Step Turning
1.3 Taper turning
1.4 Turning collars
1.5 Knurling
1.6 Facing
1.7 Thread cutting
1.8 Combination of all the operations
2. Milling and shaping
2.1 Shaping practice
2.2 Key way cutting
2.3 Various milling operations
2.4 T- slot cutting on milling machine
3. Slotter planner and drilling
3.1 perform operation on a slotter and planner
3.2 draw the drill and label various parts
3.3 Make hole on flange using jigs
4. Servicing & maintenance
SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 64

4.1 sub assembly of small components such as tail stock 3 jaw, 4 jaw chuck
4.2 measurements of wear on machine elements such as lathe beds guide ways of lathe and shaper
4.3 selection of appropriate recovery methods for a given machine element and performing recovery
processes by using appropriate methods such as Arc gas welding, Metal spraying applying adhesives
etc
4.4 Fault finding and repairing of machine tool and preparation of preventive maintenance schedule of
work shop.

XXXXXXXXXXXXXXXXXXXXXXX

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 65

Subject Title: Theory of Machines

Subject Title : Theory of Machines

Subject Code : Me-404

Hours Per Week : 03

Hours Per Semester : 45

Class Test hrs : 03

Total hrs : 48

Full marks(Theory) : 70

Sessional Marks : 30

Class hours L T P

3 0 3

Pre requisite: Engineering Mechanics

Aim: The aim of the subject is toknow the kinematics of machine, their mechanisms, the friction involved.
Methods of transmission of power, the role of cams, effect of vibration, balancing, governors.

CO---------Outcome Based Objectives

On completion of the course, the student should be able to

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 66

1. Appreciate the importance of Kinematics of Machines, their Mechanisms & Inversions

2. Explain the friction involved in bearings, clutches & brakes
3. Know different methods of transmission of power
4. Analyze different types of cams and their motions and also to draw cam profiles for various motions
5. Know different types of vibration and to understand critical speed of shaft
6. Solve problems on balancing of masses in the sameplane
7. Know the function of different types of governors

Subject Content Details

1.0 Introduction

1.1 Definition of Theory Of Machine(TOM)

1.2 Sub – divisions of TOM

2.0 Basic kinematics of Machines

2.1 Kinematic link or element

2.2 Types of links

2.3 Kinematic pair –types

2.4 Types of constrained Motions

2.5 Kinematic chain

2.6 Machine, Structure and Mechanism

2.7 Difference between Machine and Structure

2.8 Difference between Machine and Mechanism

2.9 Inversions

2.10 Types of Kinematic Chains

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 67

2.11 Four Bar Chain

2.11.1 Beam Engine

2.11.2 Coupling Rod of Locomotive

2.11.3 Watt’s Indicator Mechanism

2.12 Single Slider Crank Chain

2.12.1 Pendulum Pump

2.12.2 Oscillating cylinder engine

2.12.3 Rotary I.C Engine

2.12.4 Crank and Slotted Lever Quick Return Motion Mechanism

2.12.5 Whitworth Quick Return Motion Mechanism.

2.13 Double Slider Crank Chain

2.13.1 Elliptical trammel

2.13.2 Scotch yoke mechanism

2.13.3 Oldham’s coupling

3.0 Friction

3.1. Friction - Friction in Journal Bearing, Friction of Pivot and Collar Bearing, types of Pivot and Collar
Bearing ( No derivation requires, formulae only). Simple Problems on the above topic.

3.2. Dynamometer- Difference between brake & clutch, difference between brake and Dynamometer.
Types of Dynamometer, classification of absorption type dynamometers.

4.0 Transmission of Power

4.1 Types of Belt Drives

4.2 Length of belt –open and cross belt drives

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 68

4.3 Velocity Ratio, Ratio of driving Tensions, Centrifugal Tension and Initial Tension

4.4 Power Transmitted by belts (flat and V) and ropes

4.5 Maximum power transmitted by belt (without proof)

4.6 Problems on belt drives

4.7 Introduction to Gears

4.8 Classification of Gears

4.9 Spur Gear Terminology

4.10 Problems on gears

4.11 Introduction to Gear Trains

4.12 Types of Gear trains –Simple, Compound, Reverted and Epicycle gear trains

4.13 Problems on Gear Trains

5.0 Cams

5.1 Introduction

5.2 Classification of cams

5.3 Classification of followers

5.4 Terminology of Radial disc cam

6.0 Mechanical Vibrations

6.1 Introduction

6.2 Terms used in Vibrations

6.3 Types of Vibrations

6.31 Free Vibrations

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 69

6.32 Forced Vibrations

6.33 Damped Vibrations

6.4 Types of Free Vibrations- Longitudinal ,Transverse and Torsional

6.5 Critical or Whirling speed of a shaft

7.0 Balancing

7.1 Introduction

7.2 Static and Dynamic balancing

7.3 Balancing of single rotating mass in the same plane of projection

7.4 Balancing of several masses rotating in the same plane of projection

7.5 Problems on above (Analytical and Graphical methods)

8.0 Governors

8.1 Introduction

8.2 Types of Governors

8.3 Centrifugal Governor

8.4 Terms used in governors

8.5 Watt Governor

8.6 Porter Governor

Reference Books :

1. Kinematics of Machines---J B K Das, Sapna Publication

2. Theory of machines-------- R.S. Khurmi&J.K.Gupta ,S.Chand publication

3 . Theory of machines------- P.L.Ballaney , Khanna publication

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 70

4. Theory of machines------- Thomas Bevan ,CBS publication

5. Theory of machines---------Malhotra& Gupta

6. Theory of machines---------S.S .Rattan ,Tata McGraw-Hill publication

7. Theory of machines---------R.K.Bansal ,Laxmi publication

8. Dynamics of Machines----J B K Das, Sapna Publication

Table Of Specification for Theory Of Machine

Sl No Hrs Topic Objective Type Short Answer Type Essay Answer Type Total
45 K C A T K C A HA T K C A HA T 97
1 1 Introduction 1 1 0 2 0 0 0 0 0 0 0 0 0 0 2
Basic Kinematics Of
2 8 Machines 2 2 0 4 0 2 2 0 4 0 3 4 3 10 18
3 7 Friction 0 2 0 2 1 2 0 0 3 4 4 5 0 9 18
Transmission Of
3 8 Power 1 2 0 3 0 2 2 0 4 0 3 3 3 9 16
5 6 Cams 0 2 0 2 0 2 0 0 2 0 4 4 0 8 12
6 6 Balancing 2 0 0 2 4 0 0 0 4 0 4 4 0 8 14
7 3 Mechanical Vibrations 0 2 0 0 0 4 0 0 4 0 0 0 0 0 6
8 6 Governor 0 2 0 2 0 2 2 0 4 0 4 4 0 8 14

Annexure -I Theory of Machine

Time Percentage
Sl No Topic K C A HA Total
Allotted(hrs) Weightage
1 Introduction 1 2.22 1 1 0 0 2
2 Basic Kinematics of Machines 8 17.78 2 7 6 3 18
3 Friction 7 15.56 5 8 5 0 18
4 Transmission of Power 8 17.78 1 7 5 3 16
5 Cams 6 13.33 0 8 4 0 12
6 Balancing 6 13.33 6 4 4 0 14
7 Mechanical Vibrations 3 6.67 0 6 0 0 6
8 Governors 6 13.33 0 8 6 0 14

XXXXXXXXXXXXXXXX

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 71

Theory Of Machines Lab

Outcome based Course Objectives

After performing the practical, the students will be able to

1. To determine the role of kinematics in machines

2. Calculate the Velocity ratio of components of transmission system like worm and worm wheel , rack and
pinion

3. Determine the coefficient of friction of belt drive

4. Calculate the speed of a Porter governor by Instantaneous center method

Course Content:

1. Study of model and working practically on machines by various mechanisms.

1.1. See the models of various mechanism in laboratory and draw the sketches labeling properly.
1.2. Deduce the formula for ratio of cutting stroke to return stroke , stroke length for quick return motion
mechanism. Know why it is called quick return motion mechanism?
1.3. Visit the machine shop and observe the functioning of the mechanism on the machine. Know how stroke
length is adjusted.
2. Transmission of Power
2.1. Draw the sketches of various belt drive system.
2.2. Determine the length of belts for various type of drives graphically and theoretically and observe the
difference.Deduce the formula for the ratio of driving tensions.
2.3. Draw the sketch of a toothed gear and label all the terminology used on it.
2.4. Observe the models of various types of gears and gear trains in laboratory and draw the sketches.
SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 72

2.5. Deduce the formula for velocity ratio for each type of gear train.
2.6. Observe the transmission of power by belt and gears practically in machine and industry.
3. Study of governors.
3.1. Deduce the relation between height of governor and speed for watt and porter governor.
3.2. Using universal governor apparatus determine characteristic curves for porter governor
i) Sleeve Position Vs Speed. ii) Radius of Rotation Vs Controlling force.
4. Balancing of rotating masses.

4.1. Explain what is balancing and why it is necessary? What is static and dynamic balancing?

4.2. Using static and dynamic balancing apparatus balance the shaft statically and dynamically and observe the
effect of unbalance.

5. Mechanical Vibration

5.1 With the help of neat sketch explain the critical or whirling speed of shaft.

5.2. Using whirling of shaft demonstrator study the effect of whirling of shaft with

i) Both ends fixed ii) Both ends supported iii) One end fixed and one end supported

XXXXXXXXXXXXXXXXXX

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 73

Subject Title: Strength of Materials

Subject Title :Strength of Materials

Subject Code : Me-405

Periods /Week : 03

Periods/semester : 45

Class Test :03

Total class :48

Full marks(Theory) :70

Sessional Marks :30

Class hours L T P

3 1 3

Pre Requisite: Mathematics, Engineering Mechanics

Aim:The aim of the subject is to let the students know the physical meaning of stress and strain, the different types
beams and the effect of different type of shear load on beam, Torsion , its effect on shaft and helical spring, thin
cylinders , column and struts, different type of columns, effect of load on column and struts

CO -----Outcome Based Course Objectives

After studying the course, the students will be able to

1. Solve problems on simple stress and strain on materials following Hooks’ Law

2. Analyze problems on cantilever beam and simply supported beam with overhanging due to point and
uniformly distributed load

3. Know simple bending and and its related effect on beams

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 74

4. Calculate the bending stress on beams based on pure bending

5. Apply the principle of pure torsion on a power transmitting shaft and a helical spring

6. Design a riveted joint

Course Content

1.0 Simple Stresses and strains

1.1 Define the strength, Mechanical properties of engineering materials, commonly used.
1.2 Identify the nature and effect of tensile, compressive and shear forces.
1.3 Define the terms stress, strain, modulus of elasticity, poisson’s ratio.
1.4 Draw typical stress Vs strain curve for a mild steel specimen under tension indicating salient
points on it.
1.5 Mention the significant of factor of safety.
1.6 Compute stress and strain values in bodies of uniform section and of composite section under
the influence of normal stresses.
1.7 Calculate thermal stresses, in bodies of uniform section and composite sections.
1.8 Find the relations between E, G, and K & Poisson’s ratio.
1.9 Compute the changes in axial, lateral and volumetric dimensions of uniform sections under the
action of normal forces.
1.10 Define resilience and Derive and expression for strain energy.
1.11 Riveted joint. Failure, Strength, efficiency and design of Rivet.

2.0 Shear force and bending moments.

2.1 List the type of beams and type loads.

2.2 Definition of shear force and bending moments.
2.3 SF and BM diagrams for various loads for simply supported, cantilever and over hanging beam
and related problems
2.4 Point of contraflaxture

3.0 Theory of simple bending and Deflection of beam

3.1 State the theory and terms of simple bending.

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 75

3.2 List the assumptions in theory of simple Bending.

3.3 Derive the bending equation M/I =f/y=E/R
3.4 Calculate Bending stress, modulus of section and Moment of
resistance.
3.5 Calculate the safe load and safe span and dimensions of cross section.
3.6 Define and explain the term deflection.
3.7 Derive the deflection formula for cantilever and simply supported
beams

3.8 Calculate the values of deflection in the given beams.

3.9 Solve problems

4.0 Stresses in beams

4.1 Neutral surface and neutral axis

4.2 Bending Equation

4.3 Problems of stress on different beams.

5.0 Torsion in circular shafts and springs

5.1 Function of shaft.

5.2 Explain Polar moment of inertia of solid and hollow shaft.

5.3 Derive the torque equation T/J=fs/R=C𝜃/𝐿

5.4 Design of solid and hollow shafts and power transmitted by solid

And hollow shaft.

5.5 Definition of spring and types of spring.

5.6 Derivation of deflection equation for helical spring.

5.7 Definition of stiffness of a spring.

5.8 Design of helical spring.

6.0 Columns and Struts

6.1 Definition of columns and struts.

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 76

6.2 Failure of a column and a strut.

6.3 Euler,s and Rankine formula for finding critical load.

6.4 Problems on various (4)end conditions of column.

7.0 Rivets and riveted joints

7.1 Riveted joint.

7.2 Failure,

7.3 Strength,

7.4 Efficiency

7.5 design of Rivet

Class Test -3 hrs

REFERENCE BOOKS:

1 .Strength of Materials by Ramamrutham.

2. Strength of MaterialsBy- M. ChakrabortiS.K.Kataria& Sons

3. Strength of Materials ,A.K.UpadhyayS.K.Kataria& Sons

4.Strength of Materials by R. S . Khurmi

Table Of Specification for Strength of Materials Total

Sl No Hrs Topic Objective Type Short Answer Type Essay Answer Type
45 K C A T K C A HA T K C A HA T 97
Simple Stress &
1 10 Strain 2 2 2 6 0 4 2 0 6 0 2 6 4 12 24
2 8 SF & BM 2 2 0 4 0 0 4 0 4 0 0 4 4 8 16
Bending &
Deflection of
3 6 Beams 0 2 2 4 0 2 2 0 4 0 0 4 0 4 12
4 6 Stress in Beams 1 1 0 2 0 2 0 0 2 0 4 4 0 8 12
Transmission in
5 6 shafts & Spring 1 1 0 2 1 2 0 0 3 0 4 3 0 7 12
6 5 Columns & Struts 1 2 0 3 0 1 2 0 3 0 0 2 3 5 11
Rivets and riveted
7 4 joints 1 1 0 2 0 0 2 0 2 0 0 2 4 6 10

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 77

Annexure -I Strength of Materials

Time Percentage
Sl No Topic K C A HA Total
Allotted(hrs) Weightage
1 Simple Stress & Strain 10 22.22 2 8 10 4 24
2 SF & BM 8 17.78 2 2 8 4 16
Bending & Deflection of
3
Beams 6 13.33 0 4 8 0 12
4 Stress in Beams 6 13.33 1 7 4 12
Transmission in shafts &
5
Spring 6 13.33 2 7 3 12
6 Columns & Struts 5 11.11 1 3 4 3 11
7 Rivets and riveted joints 4 8.89 1 1 4 4 10

XXXXXXXXXXXXXXXXXXX

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 78

Strength of Materials Laboratory

Outcome Based Objective : CO

After the experiment being performed the students will be able to

1. Draw the stress strain diagram of an MS rod showing salient points

2. Perform the compression test of a brick or a timber block

3. Determine the Hardness Number of materials

4. Torsion test on mild steel-relation between torque and angle of twist –determination of shear modulus and
shear stress
5. Finding the resistance of materials to impact loads by Izod test and Charpy test.
Course Contents

To understand the various material testing method.

i) To determine stress strain relation for mild steel rod conducting test on universal testing
machine.
ii) To determine hardness of materials using Brinell and Rockwell Testing Materials.
iii) To perform tension , bending, impact and shear test.
Exercises:

1.Test on Ductile Materials:

Finding Young’s Modulus of Elasticity, Yield Points, Percentage Elongation and Percentage Reduction in
Area , Stress Strain Diagram Plotting test on Mild Steel with the help of a Universal Testing machine.

2. Compression test of a brick or a timber block on a Compression Testing Machine

3.Hardness Test:
Determination of Brinell’s Hardness Number for metal specimen
4.Torsion Test:
Torsion test on mild steel-relation between torque and angle of twist –
Determination of shear modulus and shear stress.

5.Impact Test:

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 79

Finding the resistance of materials to impact loads by Izod test and charpytest..

6. Impact Test: Finding the resistance of materials to impact loads by Izod test and charpy test.
XXXXXXXXXXXXXXXXXXX

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 80

COURSE TITLE: PROFESSIONAL PRACTICE-II

COURSE CODE : AU 410
SEMESTER : 4th Semester
Contact hours : 15

Rationale : To develop general confidence, ability to communicate and attitude, in addition

to basic technological concept through industrial visit, expert lectures, seminar on
technical topics and group discussion.

Course Outcome:

Oncompletion of this course students will be able to-

1. Acquire information from various sources.

2. Prepare notes for given topic.

3. Technical presentation on given topic in a seminar.

4. Interact with peers to share thought

5. Prepare report on industrial visit, expert lecture.

Study Scheme(Contact hours/ week)

Lecture Tutorial Practical Total
1 - 2 3

Evaluation Scheme: Total Credit

Marks(Theory +
Sessional)
Theory Practical

ESE Sessional Pass Practic Practical Pass

TA HA Total ESE+SS al Test Assessmen (PT+P
(TA+H (PT) t (PA) A) 33/ 100 2
A)
17/50
25 25

Details of Contents (Activities):

1. INDUSTRIAL VISITS:

Structured industrial visits be engaged and report of the same should be submitted by the individual
student, to form part of the term work.
Visit any one of the following:
SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 81

1. Manufacturing organisations for observing various manufacturing processes including heat treatment.

2. Auto workshop/garage.

3. Plastic material processing unit.

4. Industries relevant to course.

2. GUEST LECTURE(S):

Lectures by Professional/Industrial expert/Student Seminar based on information search to be organized

from any one of the following areas:
4. Use of Plastics in automobiles.
5. Nonferrous metals and alloys for engineering application
6. Composite materials.
7. Refractory and Ceramics.
8. Industrial hygiene.
9. Safety engineering and waste disposal.
3. INDIVIDUAL ASSIGNMENTS:

Any two from the list suggested-

1. Process sequence of any two machine components.

2. Write material specifications for any two composite job.

3. Collection of samples of different or cutting tools with properties, specifications and applications.

4. Select materials with desirable properties for at least 10 different machine components.

5. Select 5 different carbon steels and alloy steels used in mechanical engineering applications and specify
heat treatment processes with brief description.

6. List the various properties and application of following materials:Fiber, reinforcement plastics, Thermo
plastics, thermosetting plastics & Rubbers.

OR
Conduct any one of the following activities through active participation of students and write report.
a. Rally for energy conservation/ tree plantation.
b. Survey for local social problems such as mal nutrition, cleanliness, unemployment, illiteracy.
c. Conduct aptitude, general knowledge, IQ test.
d. Arrange any one training in the following areas-
i. Yoga,
ii. Use of firefighting equipment and first aid,
iii. Maintenance of domestic appliances.
4. MODULAR COURSE(OPTIONAL)
SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 82

A course module should be designed in the following areas for max. 12hrs. Batch size – minimum 15
students.
Course may be organized internally or with the help of external organisations.
a. Forging Technology.
b. CAD –CAM related software.
c. Welding techniques.
d. Personality development.
e. Entrepreneurship development.
5. 2-D/3-D DESIGN USING SOFTWARE
Computer screen, coordinate system and planes, definition of HP,VP, reference planes, how to create them
in 2nd/3rd environment. Selection of drawing site and scale. Commands for creation of line, coordinate points,
axis, poly lines, square, rectangle, polygon, sp. Line, circles, ellipse, text, move, copy, offset, Mirror, Rotate,
Trison, Extend, Break, Chamfer, Fillet, Curves, constraint fit agency, perpendicular, dimensioning line
convention, material conventions and lettering.

Students should draw- different orthographic views(including sections), auxiliary views according to 1 st/3rd
angle projection. Minimum two sheets, each containing problems after learning the contents as above.

XXXXXXXXXXXXXXXXXXX

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 83

5TH SEMESTER

COURSE STRUCTURE OF 5th SEMESTER MECHANICAL (AUTOMOBILE) ENGINEERING

Sl No Code No. Subject Study Scheme Evaluation Scheme

(Contact Theory Practical Total Credit
hours/week) Marks(T
L T P ESE Sessional (SS) Pass(ES Practic Practica Pass heory+P
TA HA Total E+SS) al Test l (PT+PA) ractical)
(TA+ (PT) # Assess
HA) ment(P
A)@

1 Au-501 Automobile Chassis and Transmission 3 - 3 70 10 20 30 33/100 25 25 17/50 150 4

2 Au-502 Garage Practice & Management 3 - 3 70 10 20 30 33/100 25 25 17/50 150 4
3 Au-503 Auto Workshop Practice-II - 6 - - - - - 100 50 50/150 150 4
4 Au-504 Machine Drawing & CAD 3 3 - - - - - 100 50 50/150 150 5
5 Au-505 Heat Power Engineering 3 1 - 70 10 20 30 33/100 - - - 100 3
Au-510 Professional Practice- III 1 2 25 25 17/50 50 2
Elective (Any One)
6 Me-502 Industrial Engineering 3 - 70 10 20 30 33/100 - - - 100 3
7 Au-506 Refrigeration and Air Conditioning 3 - 70 10 20 30 33/100 - - - 100 3
8 EL/ME/A Non-Conventional Energy 3 - 70 10 20 30 33/100 - - - 100 3
U/IPE-
505
Total 16 1 17 850 25
34

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 84

COURSE TITLE: AUTOMOBILE CHASSIS AND TRANSMISSION

COURSE CODE : AU 501
SEMESTER : 5th Semester
Contact hours : 45

Rationale : This is a core technology course of Mechanical(Automobile) engineering

provides fundamental knowledge of vehicle control system, their parts andpower
transmission system.Conceptual knowledge of this course is very much essential
for vehicle maintenance and improving of performance of automobile control
systems and transmission.

Course Outcome: On completion of this course students will be able to:

1. Define different types of chassis frames.

2. State various components of chassis and draw chassis layout.
3. Understand the construction and working of various control systems employed in a vehicle such as
suspension system, steering system, braking system, transmission system.
4. Understand the causes and remedies of various troubles associate with these control systems.
5. Understandconstruction of axles and wheels used in automobiles.
6. Understand the importance of chassis lubrication.

Study Scheme(Contact hours/ week)

Lecture Tutorial Practical Total
3 - 3 6

Evaluation Scheme: Total Credi

Marks(Theory t
+ Sessional)
Theory Practical
ESE Sessional Pass Practical Practical Pass
TA HA Total ESE+SS Test (PT) Assessment (PT+PA)
(TA+HA (PA) 50/ 150 4
)
70 10 20 30 33/100 25 25 17/50

Detailed Course Content:

1.0 Vehicle layout, chassis and Chassis frame: 3
1.1 Introduction, Definition of chassis, Classification and specifications of chassis- 2-wheeler,
Passenger car, Commercial vehicle
1.2 Vehicle lay out and its types- 2 wheel drive,4-wheel drive, front engine front wheel drive, rear
engine rear wheel drive, front engine rear wheel drive
1.3 Major components of chassis- their locations and functions.
SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 85

1.4 Various loads acting on chassis frame.

1.5 Types of frames, frame constructions and materials
1.6 Automobile body- Types and construction- integral and built up car body (salon, station wagon,
traveler’s car) bus body and truck body, requirements of Automobile body, body parts and materials.
2.0 Suspension system:- 5
2.1 Function of suspension system, types of suspension system, advantages and disadvantages of
different suspension system, engine mountings, front end suspension system, rear end suspension
system, rigid axel front wheel system, independent front wheel suspension system.
2.2 Different types of springs used in suspension system, torsion bar, stabilizer
Shock absorbers- its working principle, types of Shock absorbers, frictional and hydraulic shock
absorber, gas filled shock absorber.

3.0 Steering: 4
3.1 Functions of Steering, requirements of Steering, different types of Steering, different Steering gear
mechanism, Fifth wheel steering ,Steering gear ratio, Steering mechanism:- Davis steering gear
mechanism, Ackermann steering gear mechanism.
3.2 Factors affecting wheel alignment, castor angle, king-pin inclination, combined angle, toe-in, toe-
out etc. cornering force, slip angle, under Steering, over- Steering, common defects and remedies.
3.3 Power Steering: - functions, types, working and application.

4.0 Brake system: 5

4.1 Necessity and requirement of brakes, types of brake system with details, brake shoe, brake lining,
brake drum etc.
4.2 Hydraulic brake system, master cylinder, tandem-master cylinder, wheel cylinder, brakes lines,
bleeding of brake system.
4.3 Power brake, vacuum- assist power brakes, air or pneumatic brake, parking brake, braking
efficiency: common defects and remedies.
4.4 Antilock braking system- functions, types of ABS, components and working principles, EBD.
5.0 Clutch: 5
5.1 Functions of clutch, requirements of clutch, clutch plate material, types of clutch-single, multi-plate
clutch, centrifugal clutch, hydraulic clutch etc. Main parts of clutch and their description with
operating principles, clutch adjustments. Common defects and remedies of clutch, uses of different
types of clutch in various vehicle.
5.2 Function and description of cone clutch, centrifugal clutch, semi-centrifugal clutch, hydraulic
clutch, diaphragm clutch, vacuum clutch.
5.3 Fluid flywheel and its constructional details and principles, advantages and disadvantages of fluid
flywheel.

6.0 Gear Box: 5

6.1 Functions of gear box, requirements of gear box, types of gear box, sliding mesh, synchromesh,
constant-mesh gear box, difference between them, gear actuating mechanism, different types of gear
boxes used in various vehicles. Common defects and remedies in the gear boxes.
6.2 Torque converter and its construction and working principle, advantages and disadvantages of
torque converter.

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 86

6.3 Automatic Manual Transmission (AMT), continuously variable transmission (CVT), Direct Shift
Gear Box (DSG).
7.0 Propeller shafts and universal joints: 2
7.1 Functions of propeller shafts, universal joints, slip joint. Propeller shafts of front wheel and rear
wheel drive vehicles. Trouble shooting of propeller shaft.
7.2 Universal joints: Types of universal joints and its constructional details and their uses.

8.0 Final drive and Differential :- 3

8.1 Final drive- Straight bevel gear, Spiral bevel gear hypoid gears, single reduction final drive system,
double reduction final drive system, worm and wheel arrangement.
8.2 Types of drive- Hotchkiss drive, Torque tube drive.
8.3 Functions of differential, principles of differential, description, differential lock. Troubleshooting
of differential.

9.0 Rear Axle: 2

9.1 Types of Rear axle:- types, Full floating, three quarter floating, semi floating axles, functions of rear
axles, constructional details and different load on the axles, four wheel drive mechanisms.

10.0 Front Axle: 2

10.1 Necessity of front axle, types of front axles, stub axles and types, front wheel drive axle, front wheel
assembly, live axle, dead axle, various defects in axles and its remedies.

11.0 Wheels and Tyres: 2

11.1 Functions of wheels, types of wheel assembly, wheel dimensions etc. Alloy wheel, advantages and
disadvantages.
11.2 Tyre:- Types of tyres-Tube tyre, tubeless tyre, high-pressure tyre, low pressure tyre. Carcass or
skeleton of tyres-cross-ply type, redial ply type, belted bias type-their advantages. Tyre materials,
constructions of tyre. Factors affecting tyre life, Specification of Tyres.
12.0 Power transmission system of two wheelers like scooter, motor cycle. 2

13.0 Chassis lubrication: 2

Importance, lubricants used for chassis-lubrication, lubricating points for chassis lubrication. Lubricants used
for suspension system, steering system, gearbox, differential, front and rear axle, distributor etc., lubricating
charts.

14.0 Class Test. 3

Reference Book, Journal, Manuals etc.:

4. C. P. Nakra: Basic Automobile Engineering, DhanpatRai Publications
5. Crouse &Anglin: Automotive Mechanics

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 87

6. G. B. S. Narang: Automobile Engineering, Khanna Publisher

7. Dr. KripalShing: Automobile EngineeringVol-II

Table of specification
Sr. Topic Time allotted in Percentage K C A HA
No (a) hours Weightage
(b) (c)
1 Vehicle layout chassis and
3 7% 1 0 2
Chassis frame
2 Suspension System 5 12% 5 1 1
3 Steering 4 10% 5 0 0
4 Brake System 5 12% 8 1 1
5 Clutch 5 12% 8 1 1
6 Gear Box 5 12% 8 1 1
7 Propeller Shaft and Universal
2 5% 2 2 0
Joints
8 Final Drive and Differential 3 7% 4 0 1
9 Rear Axle 2 5% 2 0 1
10 Front Axle 2 5% 2 1 0
11 Wheels and Tyres 3 7% 3 2 0
12 Power Transmission of Two
2 5% 1 1 1
wheelers
13 Chassis lubrication 1 2% 1 0 1
14 Class Test 3
Total  b=45 100% 50 10 10

K = Knowledge C = Comprehension A = Application HA = Higher

Than Application (Analysis, Synthesis, Evaluation)

𝑏
c= ∑𝑏X100

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 88

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 89

Automobile Chassis and Transmission(Lab)

TOTAL hours: 60

Evaluation Scheme: Credit

Study Scheme(Contact hours/ week) Practical
L T P Practical Test Practical Pass (PT+PA)
(PT) Assessment (PA)

0 0 3 25 25 17/50

1. Cleaning of engines parts: various cleaning procedures (chemical, thermal and abrasive cleaning) of different
parts of petrol/diesel engines.
2. Overhauling of clutch assembly in 2 wheelers:
2.1 Dismantling, installing and aligning a clutch disc in a two wheelers,
2.2 Clutch free pedal play adjustments, clutch troubles.
3. Gearbox Troubleshooting -
3.1 Servicing and adjustment of gear selector mechanism.
3.2 Troubleshooting of gearboxes like slipping out of gears, difficult shifting of gears, noise in gears or
transmission noise etc.
3.3 Determination of gear ratios of different types of gear box.
4. Troubleshooting of propeller shaft, differential & final drive
4.1 Angular alignment of propeller shaft and changing of cross and bearing from universal joints.
4.2 Measuring and adjusting backlash and side bearing preload on a final drive assembly with a shim pack and
adjusting nuts.
4.3 Diagnosing differential noises, causes and remedies.
5. Study of rear axles-
4.1 Semi floating, three quarter floating and full floating axles according to load and construction.
4.2 Replacing procedure of axle bearing and oil seal.
6. Study of power brakes-
6.1 Types of power brakes- Air brake, servo assisted brakes etc.
6.2 Overhauling of power brake system.

7. Study of steering geometry-

7.1 Adjustment of steering geometry:-camber, caster, toe-in and toe-out (wheel alignment).
8. Study of wheels-
8.1 Conventional & alloy rims
8.2 Tube& tubeless type, Cross ply & radial ply type.
8.3 Specification of tyres

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 90

8.4 Vulcanizing of tube tyre, repair and replace of tubeless tyre, tyre rotation procedure.

9. Study of power steering system -

9.1 Hydraulically and electronically assisted.
9.2 Overhauling of power steering pump.
10. Study of suspension system
10.1Rigid axle suspension & independent suspension system,

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 91

11. Hotchkiss drive & torque tube drive.Types of springs.hock absorber- hydraulic & gas type. Leakage of shock
absorber.
12. Vivavoce/Seminar

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 92

COURSE TITLE: GARAGE PRACTICEAND MANAGEMENT

COURSE CODE : AU 502
LEVEL : 5th Semester
Contact hours : 45

Rationale : This course is important for the students of Mechanical (Automobile) Engineeringto
acquire the knowledge of special tools and equipment to suite modern technology and
management of modern garage.

Course Outcomes:

Oncompletion of this course student will be able to-

1. Identify and enlistgarage tools, equipment and prepare garage layout for setting new garage and
service station.
2. Identifydifferent garagesfound in common practice.
3. Understand the various activities take place in a modern garage and service station
4. Understandschedule maintenance of automobiles.
5. Understand management of garage store, procurement of stores,sales and distribution motor
vehicles.
6. Know the main features of motor vehicle act applicable for day to day life.

Study Scheme(Contact hours/ week)

Lecture Tutorial Practical Total
3 - 3 6

Evaluation Scheme: Total Credi

Marks(Theory t
+ Sessional)
Theory Practical

ESE Sessional Pass Practical Practical Pass

TA HA ESE+SS Test (PT) Assessment (PT+PA)
Total (PA) 50/ 150 4
(TA+HA
)
70 10 20 30 33/100 25 25 17/50

Detailed Course Content:

1.0 Introduction: 5

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 93

1.1 Garage, service station, factors to be considered while locating garage and service station. Types of
garage. Layout of service station and garage.
1.2 Equipment for service station, washing and cleaning equipment, hydraulic ram, air compressor,
blower, water pump, lubricating equipment-grease gun and nipples, hand and compressed air
operated lubrication equipment, lubrication charts, servicing procedure.

2.0 Equipment for Service Station: 4

2.1 Garage tools and equipment- different types of garage tools, special tool, flaring tools, cutters,
pullers, stud extractors, torque wrench, piston ring expander and compressor, piston ring groove
cleaner, valve lifter etc.
2.2 Reconditioning equipment- degreasing plant, de-carbonizing, cylinder re-boring and honing, valve
re-facer, grinding of crank shaft main journal bearings, crank pin, connecting rod aligner, brake
drum lathe, brake shoe riveting, rivet gun (pneumatic type, hand operated type), valve spring tester,
injector test bench, injection pump and calibrating machine.

3.0 Engine Testing and Tuning: 3

3.1 Engine testing procedure, engine testing equipments, engine analyzer or computer/carscanner,
compression gauge, vacuum gauge, voltmeter, ohm meter, ammeter, tachometer, oscilloscope,
timing light, multi meter etc.
3.2 Engine timing- Tune-up procedure, major and minor tune up.

4.0 Material Handling: 4

4.1 Objectives and functions of material handling, Material handling equipment- Lift and hoist and their
types, chain pulley block, cranes, trolley, fork lift truck, jacks, recovery van, car lift,towing
equipment, Ramp.

5.0 Body repairing, reconditioning and painting. 4

5.1 General background of body repairing, accident repair, repairing dents, wielding, metal shrinkage,
soldering etc.
5.2 Painting:- Definition, objective of paintings, elements of paints, primer, paint coat- undercoat paint,
primer surface, second coat paint, sealer, top coat paint. Surface preparation or treatment- details
application of sanding putty, abrasive paper and their uses with number.

6.0 Garage work procedure and records: 4

6.1 Inspection, test report, estimation and quotation for repair work, work order, job control
system, billing and costing.

7.0 Garage stores: 4

7.1 Stores and material control, requirements of material control system, store management, functions
of store department, duties of store keeper, location and layout of stores, receipt and issue of
materials, store records, bin card, stores ledger, indent on store, types of stores, storage and handling
equipments. Inspection, prevention of spoilage of stores, storage of inflammables, stores, petrol,
diesel, oil, rubber components, tubes and tyres, plastics etc.

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 94

7.2 Inventory control, various levels of stock such as ordering level, maximum level, Economic Order
Quantity,buffer stock, interchangeability of spares etc. Centralized and decentralized stores.ABC
analysis.
7.3 Purchase organization, importance, objectives, functions, duties, methods of purchasing, purchasing
procedure, tenders, tender notice, purchase order, etc.

8.0 Sales and distribution of motor vehicles: 3

8.1 Marketing organization, salesmanship, canvassing, publicity, display, dealership and agency
system, sales and purchase procedure, documents for new and second hand vehicles, service after
sales, customer record and follow-up.

9.0 Industrial law and road transportation: 5

9.1 Motor vehicle act, driving license, permits, registration, insurance, fitness certificate, pollution
under control certificate, MACT, motor vehicle act 1939, motor vehicle act 1989 and amendments
thereafter. Traffic signals and their types.

10.0 Maintenance: 5
10.1 Elements of maintenance management, preventive maintenance- items and procedure of preventive
maintenance, running maintenance, daily and periodic maintenance for prevention of break down.
Brake down maintenance- procedure and preparation, scheduled maintenance.
11.0 Important features of automobiles : 1
Log book (operational records) of vehicles such as movement, servicing, oil change, changing filter
elements, repairing records etc.

12.0 Class Test: 3

Reference/ Text Books:

1. Crouse and Anglin: Automotive Mechanics
2. G.B.S. Narang: Automobile Engineering,
3. James E. Duffy : Body Repair Technology for 4-Wheelers
4. T.R Banga&S.C.Sharma: Industrial Organisation and Engineering Economics, Khanna
Publishers

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 95

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 96

GARAGE PRACTICE AND MANAGEMENT (LAB)

CODE NO: Au 502

COURSE OUTCOMES:Oncompletion of this course students will be able to-

1. Identification of different Garage tools, Equipment and their uses.

2. Demonstrate the testing of engine.
3. Perform reconditioning of engine system.
4. Demonstratewashing, cleaning and servicing procedure of an automobile vehicle and vehicle maintenance.
5. Perform driving practice and vehicle maintenance.

Details of Contents:

1. Identify Garage tools, Equipment and their uses. 3

2. Engine Testing and tuning: 15
2.1 Study of various spark plugs. Spark plug testing and cleaning, gap measuring and adjusting.
2.2 Testing and adjustment of ignition timing with ignition timing tester in an engine.
2.3 Study cam/Dowell angle of S.I. engine. Measure the Dowell angle with the help of filler gauge and
Dowell meter when the contact-breaker points are replaced.
2.4 On board diagnosing of an engine with car scanner
2.5 Measurement of fuel consumption, emissions and vehicle performance by road simulation

2.2 Calibration of Fuel Injection Pump of a diesel engine.

3. Engine reconditioning: 15
3.1 Study engine gaskets, gasket materials and various types of gaskets used in Automobile vehicle,
general gasket installation procedure.
3.2 Checking Cylinder Bore for taper and ovality / out of roundness, Cylinder Boring and honing &
compression test in an engine.
3.3 To measure and align bend, twist and off-set of connecting rod with the connecting rod aligner.
3.4 Checking of crankshaft and main journal pin for taper and ovality. According to manufacturer’s
specification grind the Crankshaft pins with crankshaft grinding machine, if necessary.
3.5 Valve re-facing, Grinding and seat cutting.
4 Vehicle Maintenance: 9
4.1 Surface preparation, Removing dents and vehicle painting.
4.2 Washing, cleaning and servicing procedure of a vehicle (According to maintenance schedule).
4.3 Periodic and breakdown maintenance of automobiles.

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 97

5 Driving practice 15
5.1 Study of traffic signals and identify all types of traffic signals and indicators.
5.2 Driving practice in a 4 wheeler vehicle: First hand checking of vehicle before driving, use of clutch,
gear, accelerator,brake, signal lights, study of dash boardinstruments, safety precautions,

6 Viva-voce

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 98

COURSE TITLE: Automobile Workshop Practice II

COURSE CODE : AU 503
SEMESTER : 5th
Contact hours : 90

Rationale : Thiscourse makes the student to apply theoretical knowledge to develop

skill for repairing and maintenance of different mechanical systems of automobiles.

Course Outcome: After completion of this course students will be able to

3. Demonstrate the procedure of complete overhauling of transmission system and control system of
automobiles.
4. Demonstrate the construction and working of transmission system and control system of automobiles.

Evaluation Scheme: Credit

Study Scheme(Contact hours/ week) Practical
L T P Practical Test Practical Pass (PT+PA)
(PT) Assessment (PA)
4
0 0 6 100 50 50/150

Details of Contents:

1.0 Chassis and Frame:-

Study layout of different types of frame and Chassis of car, truck and buses.
2.0 Clutch:-
2.1 Procedure of demount the complete clutch assembly from an automobile vehicle.
2.2 Dismantling a clutch unit, note down the different parts, clean, inspect & rectify the possible defects /
troubles. Refit the clutch assembly after necessary adjustments.

3.0 Gear box:-

Procedure of demount the Gear box from a given automobile vehicle

Dismantle the gear box, cleaning, inspection and check for defects, change the parts if required. Reassemble
the parts, check for back lash. Refit the selector mechanism and check for proper shifting of gears. Mount
the gear box on the vehicle.

3.0 Universal Joints and Propeller Shaft: -

Dismantle the Universal Joints and Propeller Shaft, cleaning, inspection and check for possible defects,
change the parts if required. Reassemble the parts and refit the whole unit.

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 99

4.0 Differential: -
Dismantle the Differential gears, cleaning, inspection and check for possible defects, change the parts if
required. Reassemble the parts, check for back lash and refit the whole assembly.

5.0 Rear Axles & Front Axle: -

Dismantle the rear axle assemblies, specify/identify the specific type of rear axle, cleaning, inspection and
check for possible defects, change the parts if required. Reassemble the parts and refit the whole
assembly.Servicing offront axle assemblies.
6.0 Steering System: -
Study of steering system, servicing of steering gear box and steering linkages, adjustments, refitting the
steering gear box, adjustment of steering play if any.Road test.

7.0 Wheels and Tyres:-Static and dynamic balancing of wheels and wheel alignment

8.0 Brake system:-

Study of brake system,servicing of master cylinder, wheel cylinder- and refitting the brake system. .Bleeding
of brake system.

9.0 Servicing of vehicle:-

Practice on servicing of vehicle, procedure of servicing, servicing tools/equipment and its uses.

10.0 VIVA

Reference Book, Journal, Manuals etc.:

8. C. P. Nakra: Basic Automobile Engineering, DhanpatRai Publications
9. Crouse &Anglin: Automotive Mechanics
10. N. Malhotra : Automobile Engineering Practical, Asian Publication.

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 100

TABLE OF SPECIFICATIONS FOR Practical Test

Sr. Topic Time allotted in Percentage K C A H T

No (a) hours Weightage A
(b) (c)
1 Chassis and Frame 9 10% 1 2 5 8
2 Clutch 9 10% 1 3 8 12
3 Gear Box 9 10% 1 3 8 12
4 Universal Joints & 6
7% 1 2 5 8
Propeller Shaft
5 Differential 9 10% 1 1 7 9
6 Rear axles and Front 6
7% 1 1 6 8
axles
7 Steering System 9 10% 1 2 6 9
8 Wheels and Tyres 9 10% 1 2 6 9
9 Brake system 9 10% 1 2 7 10
10 Servicing of vehicle 9 10% 1 2 7 10
11 Viva/SEMINAR 4 4% 5 0 0 5
Total  b= 90 1 2 65
100% 100
5 0

K = Knowledge C = Comprehension A = Application HA =

Higher Than Application
𝑏
c= X100 T= Total
∑𝑏

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 101

COURSE TITLE: Machine Drawing and CAD

COURSE CODE : Me -504
SEMESTER : 5th Semester
Contact hours : 90

Rationale : This course helps the students in understanding of drawing, which includes clear
visualization of objects and the proficiency in reading and interpreting a wide variety of machine elements and
assembly drawings. This course also reinforces and enhances the knowledge and skill acquired in the earlier lower
semester course.

Course Outcome: After completion of this course students will be to:

1. Draw true shape of solid sections, surface development of solid sections.

2. Read and interpret machine elements and assembly drawings
3. Draw different machine elements and engine parts.
4. Draw 2D and 3D machine element using software.

Study Scheme(Contact hours/ week)

Lecture Tutorial Practical Total
3 - 3 6

Evaluation Scheme: Total Credit

Marks(The
ory +
Theory Practical Sessional)
ESE Sessional Pass Practical Practical Pass
TA HA Total ESE+SS Test (PT) Assessment (PT+PA)
(TA+HA (PA) 50/ 150 5
)

100 50 50/150

Detailed Course Content:

1.0 Section of Solids: 18

1.1 Cutting geometric solids with plans, true shape of the sections, development of surface of geometric
solids and interpenetration. Parallel and radial line development.
SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 102

2.0 Pipe drawing: 6

2.1 Pipe joints, Pipe fittings.
2.2 Piping drawings.

3.0 Keys and cotters. 6

3.1 Keys and spline.
3.2 Cutter joints.
3.3 Knuckle joints.
4.0 Welded joints: 3
4.1 Lap joints, Butt joints, single and double butt.
5.0 Shaft coupling: 9
5.1 Rigid coupling (anyone).
5.2 Non rigid or flexible coupling: such as pin coupling, floor coupling etc. (anyone)
6.0 Bearings and Brackets: 6
6.1 foot step bearing, bush bearing, wall bracket (anyone).
6.2 Plummer block.
7.0 Pulleys: 9
7.1 Fast and loose pulley, cone pulley.

8.0 valves: 9
8.1 Stop valve, feed check valve.
9.0 Engine parts: 9
9.1 Steam engine piston and rings, piston rod assembly staffing box, cross head eccentric.
9.2 IC engine piston with rings and gudgeon, pin connecting rod.

10. C.A.D 9
10.1 Drawing of figure using absolute coordinates, polar coordinates and relative
Co-ordinates
10.2 Drawing of figure using the line and Circle and Arc commands and dimensioning
of figure.
10.3 Use of Snap, Copy, offset, fillet, Mirror and Array Command.
10.4 Showing of front, side, top view of an object and hatching the views.
10.5 Construction of composite solid of an object by using solprof command to
generate front side, and top profiles.

10.6 Drawing of figure by using 3D command.

11.0 Class Test 6

Reference/Text Books:

1. R.B. Gupta : Machine Drawing

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 103

2. V.M. Panchal& N.D. Bhatt: Engineering Drawing

3. N.D. Bhatt : Machine Drawing, Charotar Publishing House.

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 104

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 105

COURSE TITLE: HEAT POWER ENGINEERING

COURSE CODE : Au-505

SEMESTER : 5th Semester

Contact Hours : 45

Course Outcomes: On the completion of the course the students should be able to:

1. Understand Working, construction, mountings and accessories of Steam generators

2. Illustrate the principle and working of steam nozzles
3. Explain the principle and operations of different types of steam turbines
4. Summaries the principle and operations of Steam condensers and Cooling towers
5. Understand the working principle of Nuclear power plant.
6. State the different laws of heat transfer.

Study Scheme(Contact hours/ week)

Lecture Tutorial Practical Total
3 1 4

Evaluation Scheme: Total Marks Credit

(Theory +
Sessional)
Theory Practical
ESE Sessional Pass Practical Practical Pass
TA HA Total ESE+SS Test (PT) Assessment (PT+PA)
(TA+HA (PA) 33/ 100 3
)
70 10 20 30 33/100

COURSE CONTENTS

1.0 Steam generators 10

1.1 Steam boiler- function of boiler -classification of boilers

1.2 Low pressure boilers- Sketch and working of Cochran and Babcock and
Wilcox boiler
1.3 High pressure boilers- Sketch and working of Lamont and Benson boiler
1.4 Comparison of water tube and fire tube boilers.
1.5 Boiler mountings-Pressure gauge, water level indicator, fusible plug, blow off valve, stop valve,
safety valve
1.6 Boiler accessories - feed pump, economizer, super heater and
air pre-heater
1.7 Boiler fuels, burning equipment and ash handling
1.8 Chimney draught and measurement
1.9 Feed water treatment
1.10 Boiler performance, Boiler acts, dry inspection and hydraulic test
SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 106

2.0 Steam nozzles 05

2.1 Introduction -Types of stem nozzles

2.2 Flow of steam through nozzle
2.3 Friction in a nozzle
2.3 Discharge of steam through nozzles
2.5 Condition for maximum discharge
2.6 Critical pressure ratio-Physical significance
2.7 Effect of friction in nozzles
2.8 Supersaturated flow through nozzle
2.9 Simple problems of nozzles

3.0 Steam turbine 10

3.1 Classification of steam turbines with examples and their working

3.2 Turbine components
3.3 Working principle with line diagram of a simple De-Laval turbine - velocity diagram of impulse
turbine
3.4 Expression for work done, axial thrust, diagram efficiency, stage efficiency, nozzle efficiency.
3.5 Methods of reducing rotor speed by compounding (velocity compounding, pressure compounding
& pressure - velocity compounding)
3.6 Working principle with line diagram of a Parson’s Reaction turbine - velocity diagram of reaction
turbine
3.7 Losses in steam turbine
3.8 Governing of turbine
3.9 Simple problems on single stage impulse turbines (without blade friction) and reaction turbines

4.0 Steam condensers and Cooling towers 07

4.1 Function of condenser

4.2 Elements of steam condensing plant
4.3 Types of Condenser-Jet Condenser and Surface Condenser
4.4 Vacuum in condenser and its measurement
4.5 Cooling tower

5.0 Nuclear power plant 05

5.1 Elements of nuclear power plant

5.2 Nuclear reactor, fuels, moderators, coolants and control
5.3 Classification of nuclear power station
5.4 Cost of nuclear power

6.0 Heat transfer 03

6.1 Fourier’s law of heat conduction

6.2 Newton law of cooling- Stefan-Boltzmann law of radiation
6.3 Heat transfer by conduction through slab and composite wall
6.4 Radial heat transfer by conduction through a thick cylinder
6.5 Simple problems on above (conduction only)
SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 107

7.0 Class Test 03

REFERENCES

1. “Fundamental of thermodynamics” by Richard E Snatag, Claus Borgnakke, Gordon J Vanwylen, Wiley

Student edition, 6th Ed.,
2. “ Basic and applied thermodynamics” by P.K.Nag ,Tata McGraw hill, New Delhi 2009
3. “Heat engines (Vol-I &Vol-II)”by Patel and Karmachandani
4. “Thermal Engineering “by R.S.Khurmi
5. “Thermal Engineering” by P.L. Balaney
6. “Thermodynamics applied to heat engines”byLewitt.
7. “Heat engines” by Pandya and shah

“A course in Thermodynamics & Heat Engines” Kothandaraman, Khajuria&Arora, Dhanpat Ray & Sons

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 108

COURSE TITLE: PROFESSIONAL PRAVTICE-III

COURSE CODE : AU 510
SEMESTER : 5th Semester
Contact hours : 30

Rationale : To develop general confidence, ability to communicate and attitude, in addition

to basic technological concept through industrial visit, expert lectures, seminar on
technical topics and group discussion.

Course Outcome:

On completion of this course students will be able to-

1. Acquire information from various sources.

2. Prepare notes for given topic.
3. Technical presentation on given topic in a seminar.
4. Interact with peers to share thought
5. Prepare report on industrial visit, expert lecture.

Study Scheme(Contact hours/ week)

Lecture Tutorial Practical Total
1 - 2 3

Evaluation Scheme: Total Credi

Marks(Theory t
+ Sessional)
Theory Practical
ESE Sessional Pass Practical Practical Pass
TA HA Total ESE+SS Test (PT) Assessment (PT+PA)
(TA+HA (PA) 33/ 100 2
)
25 25 17/50

Contents Activities

1. INDUSTRIAL VISITS 12

Structured industrial visits be arranged and report of the same shall be submitted by the individual student, to form a
part of the term work. The industrial visits may be arranged in the following areas / industries(one):
i. Painting shop

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 109

ii. State Transport workshop / Auto service station

iii. Automobile parts and accessories manufacturing unit.
iv. Diesel Loco Shed, Thermal power plant.

2. LECTURES BY PROFESSIONAL / INDUSTRIAL EXPERT LECTURES TO BE ORGANIZED FROM

ANY ONE OF THE FOLLOWING AREAS: 3

a) Interview Techniques.
b) Modern Boilers - Provisions in IBR
c) Applications of Sensors and Transducers
d) Alternate fuels - CNG / LPG, Biodiesel, Ethanol, hydrogen
e) Piping technology.
f) Heat transfer.

3. INFORMATION SEARCH: 5

Information search can be done through manufacturer's catalogue, websites, magazines, books etc. and submit a report
any one topic.
Following topics are suggested:
a) Power steering
b) Automatic transmission
c) Diesel Locomotive
d) Heat Exchangers
e) Power brakes
f) Maintenance procedure for solar equipment.
g) New development in Automobile engineering technology.

4. SEMINAR: 10

Seminar on the report submitted of the topic mentioned above at point no.3.

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 110

Course Title: INDUSTRIAL ENGINEERING

Subject Title :INDUSTRIAL ENGINEERING

Subject Code : Me-502
Hours Per Week : 03
Hours Per Semester : 45
Class Test hrs : 03
Total hours : 48
Full marks(Theory) : 70
Sessional Marks : 30
Class hours L T P
3 0 0

Pre Requisites: None

Aim of the Subject: The aim of the subject is to know the method of work study and its related techniques, to
understand job evaluation , wage system, inspection procedure & quality Control , network analysis and various
maintenance systems in Industry.

CO ____OUTCOME BASED OBJECTIVES

After studying the course the students will be able to

1. Explain the principle of work study(Method and Time study)

2. Illustrate the job evaluation and merit rating

3. Know the wage system in industry

4. Know the inspection procedure and maintenance system

5. Apply the network analysis as an effective tool of management

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 111

COURSE CONTENTS
Contribution of work study to productivity
1.0 Method Study
Meaning and purpose.
Process chart, Symbols, types.
Operation process chart ; method of Construction.
Flow process chart, its elements and Relationship.
Flow diagrams.
Other tools for method analysis.
Analysing the charts and methods by questioning process.
Decisions for improving the Methods.
Purpose, basic procedures.
Work measurement : Meaning and purpose.
Time study equipment-stop watch, study board, time study forms.
Making time study, checking the methods, breakdown of the job- recording-selection of elements-
measurement of time.
Time study-rating-average rating-normal performances, factors affecting performances, rating scales, rating
factors.
Allowance to be considered in determining standard time- determination of standard time.
Predetermined motion time standard, Standard data, uses of the standard data.
Work sampling , work sampling procedure- purpose-collection of data- determination of the results.

2.0 Job Evaluation & Merit Rating

Job evaluation- definition, objectives and procedure, Job analysis, job description and Job specification.
Methods of Job Evaluation- Ranking, classification, factors comparison and point rating methods.
Merit Rating- definition and objectives
Methods of merit rating- rating scale, check list and employee comparison methods, advantages and
disadvantages of merit rating.
3.0 Wage Systems.
Wages- definition, types- wage differentials- reasons, Methods of wage payments, Types of incentives,
standard wage plans- Halsey, Weir ,Emersons, Rowan’s Gantt’s task and Bonus systems- Taylor’s piece
rate system, Merric’s piece rate system- Numerical problems on the above plans, Incentives to the
supervisor and executives.
4.0 Inspection and Statistical quality control

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 112

Inspection
Introduction- meaning of the term quality, quality of design, quality conformance & quality assurance-
quality & cost relationship, reliability, Inspection- definition- objectives of inspection-methods of
inspection- floor or patrolling inspection & centralized inspection- merits demerits- kinds of inspection-
trial run inspection- first piece inspection- pilot piece inspection- operation inspection- sample inspection,
notional inspection-final inspection- working inspection.
Review of statistical terms- Quality control- measurable & non-measurable.
Variation in manufacture- assignable causes- chance causes- inspection.
Causes- variables- attributes- tally sheet frequency table histogram- frequency polygon- Normal curve-
properties of normal curve.
Average and grand average- their significance determination of upper and lower control limits of X and R
using statistical tables, construction of X and R charts for a group of samples.
Analysis of control charts- process out of control, and in control.
Thumb rules for analysis- shifts, runs, trends, erratic fluctuations.
Control charts for attributes- fraction defective- percent defective- P,NP,100p charts- significance-
characteristics of X and R charts- calculation of P from data- control limits- process ‘in control’ and ‘out of
control’ –differences between P,NP and 100P charts.
Sampling procedure lot, Meaning of the term- lot- lot quality, lot size, sample size and acceptance number-
lot sampling.
Probability of acceptance- producer’s risk- consumer’s risk LTPD, AOQ and AOQL.
Single sampling plan- Parameters that affect the lot size and sample size and acceptance number- effect of
sample size and acceptance number on probability of acceptance (Pa)- ‘OC’ curves of a single sampling
plan- Variables involved in double sampling plan- Calculation of Pa. A B C standard.
Problems using tables.
5.0 Network Analysis.
Definition- Network Techniques- PERT, CPM, RAMS, PEP, COPAC, MAP, RPSM, LCS, MOSS, PCS,
GERT.
Terms used in Network Planning- Event, Activity, Classification of Activity, Critical Path, Duration, Total
project time, EST, EFT, LFT, LST, Float or slack, Total float, Free float, Independent float.
Network diagram or Arrow diagram- Construction, critical path, calculation of project duration.
Simple problem on CP and Project duration.

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 113

REFERENCE BOOKS

1. Work Study- by I.L.O.

2. Industrial Engineering and Management Science- by T.R.Banga
3. Industrial Engineering and Management- by O.P.Khanna
4. S.O.C.- by Juran
Table Of Specification for Industrial Engineering
Sl No Hrs Topic Objective Type Short Answer Type Essay Answer Type Total
45 K C A T K C A HA T K C A HA T 97
1 14 Work Study 2 4 2 8 3 2 4 0 6 0 6 6 5 17 34
Job Evaluation and
2 6 Merit Rating 1 2 0 3 2 1 2 0 5 0 3 3 0 6 14
Wage and Incentive
3 6 System 1 2 0 3 2 1 0 0 3 0 3 5 0 8 14
Inspection and
Statistical Quality
3 8 Control 2 1 0 3 1 1 2 0 4 0 6 4 0 10 17
5 6 Net work analysis 2 1 0 3 2 2 2 0 6 0 4 4 3 7 18

Annexure -I Industrial Engineering

Time Percentage
Sl No Topic K C A HA Total
Allotted(hrs) Weightage
1 Work Study 15 31.11 5 12 12 5 34
Job Evaluation and Merit
2 13.33
Rating 7 3 6 5 0 14
3 Wage and Incentive System 7 13.33 3 6 5 0 14
Inspection and Statistical
4 17.78
Quality Control 8 3 8 6 0 17
5 Net work analysis 8 13.33 6 9 3 0 18

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 114

COURSE TITLE:REFRIGERATION AND AIR CONDITIONING

COURSE CODE : Au -506

SEMESTER : 5th Semester

Contact Hours : 45

Course Objectives:After completion of this course student will be able to

 Explain the construction and working of different refrigeration and air conditioning system.
 Solve neumerical problems of air refrigeration and vapour compression refrigeration system.
 Explain various applications of refrigeration and air conditioning.
 Compare different refrigeration system.
 Describe trouble shootings of refrigerator and air conditioners.
 State properties of refrigerant and its application.

Study Scheme(Contact hours/ week)

Lecture Tutorial Practical Total
3 - - 3

Evaluation Scheme: Total Credit

Marks(Theory
+ Sessional)
Theory Practical
ESE Sessional Pass Practical Practical Pass
TA HA Total ESE+SS Test (PT) Assessment (PT+PA)
(TA+HA (PA) 33/ 100 3
)
70 10 20 30 33/100

DETAIL COURSE CONTENT

1.0 INTRODUCTION 2 PDS.

1.1 Terms and definition – Heat engine, refrigerator, heat pump, refrigeration, refrigerant, refrigerating
effect, refrigeration capacity, COP, relative cop
1.2 Methods of refrigeration ( names and application)
1.0 AIR REFRIGERATION SYSTEM 3 PDS.
2.1 Reversed Carnot cycle, determination of cop
2.2 Bell-Coleman cycle- open system, closed system. Determination of cop( problem)

3 VAPOUR COMPRESSION REFRIGERATION SYSTEM 6 PDS.

3.1 Fundamental operations and analysis with schematic T-S and p-h diagrams for simple cycle , COP
3.2 Advantages and disadvantages of vapour compression system over air refrigeration system
3.3 Actual vapour compression cycle—variation from theoretical cycle
3.4 Effects of sub cooling and superheating
SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 115

3.5 Simple problems

4 VAPOUR ABSORPTION SYSTEM 6 PDS
4.1 Flow diagram and operation of NH3- WATER cycle, components- generator, rectifier, condenser,
evaporator, absorber, heat exchanger, pump
4.2 Flow diagram and operation of Lithium bromide – water cycle
4.3 Flow diagram and operation of electrolux refrigerator
4.4 Comparison between vapour compression and vapour absorption systems.
5.0 REFRIGERANTS 5 PDS
Definition and function of refrigerant
5.1 Desirable properties of refrigerant
5.2 Classification of refrigerant
5.3 Important requirements, secondary requirements
5.4 Selection of refrigerant for required purpose
6.0 REFRIGERATION COMPONENTS, CONTROL AND SAFETY DEVICES 5pds
6.1 Brief description and field of application of reciprocating compressor, rotary compressor, centrifugal
compressor.

6.2 Brief description and field of application of air cooled and water cooled condensers
6.3 Brief description and field of application of evaporators
6.4 Briefdescription and field of application of expansion devices-capillary tube, thermostatic expansion
valve
6.5 Control and safety devices- low side float valve, high side float valve, solenoid valve, compressor over
current and over heating protection, high and low pressure cut-outs

7.0 APPLICATION OF REFRIGERATION 6 PDS

7.1 Food preservation- spoilage agents and their control, preservation by refrigeration
7.2 Cold storage-construction ( layout), capacity and application
7.3 Refrigerators and freezers
7.4 Ice plant- construction (layout), capacity and application
7.5 Ice- cream plant- construction (layout) and operational features
7.6 Dry ice production- construction (layout) and operation of simple system, application
7.7 Water cooler

8.0INTRODUCTION TO AIR CONDITIONING 1 PERIOD

9.0PSYCHROMETRICS5pds

9.1 Definition of different terms,

9.2Psychrometric Charts and their uses

10.0Cooling load Estimation 2 pds

10.1 A brief idea on cooling load estimation.

11.0 Air Conditioning System 3 PDS

11.1 Summer Air Conditionin

11.2 Winter Air Conditioning
SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 116

11.3 Unit And Control System, Central ac system

11.4 Plant Layout
12.0 Application of A/C System 4 PDS

12.1 Domestic, office, Schools, Commercial Establishment

12.2 Industry & Textile etc.

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 117

Course Title: NON CONVENTIONAL ENERGY

Subject Title : No Conventional Energy
Subject Code : El/Me/Au/IPE-505
Hours Per Week : 03
Hours Per Semester : 45
Class test : 03
Total Hours : 48
Full marks(Theory) : 70
Sessional Marks : 30
Class hours L T P
3 0 0

Prerequisite- None
CO-----Outcome based course objectives

After studying the course the students will be able to

1. Explain the details of Non Conventional energy sources and its uses

2. Illustrate the principle of solar energy collection

3. Analyze the principle of thermal energy storage system

4. Know the principle of wind energy conversion system

5. Differentiate the principle of ocean thermal energy conversion with energy from tidal power

6. Know about the geothermal energy

7. Identify the components of a biogas Plant

8. Explain the MHD (Magneto Hydrodynamic System)

9. Know about the chemical storage system

COURSE CONTENTS
SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 118

1.0 Introduction to Non-Conventional Energy Sources

1.1 Energy consumption
1.2 Energy Sources & their Availability
1.3 Importance of Non Conventional Energy sources.

2.0 Solar Energy Engineering

2.1 Introduction
2.2 Solar Constant
2.3 Solar Radiation at the Earth’s surface
2.4 Solar Radiation Measurements
2.5 Solar Energy Collectors
2.5.1 Principles of Conversion of Solar Radiation into heat
2.5.2 Flat Plate Collectors – Types, Applications & Advantages
2.5.3 Concentrating Collectors – Focusing & non-focusing types
2.5.4 Advantages & Disadvantages of concentrating collectors over flat plate collectors.
2.6 Applications of Solar Energy - Water Heating, Air Heater, Solar Cooker, Solar Pond, Solar
Photovoltaic and Solar Distillation.

3.0 Wind Energy Engineering

3.1 Introduction
3.2 Basic Principles of Wind energy conversion
3.2.1 The nature of wind
3.2.2 The power in the wind (No derivations)
3.2.3 Forces on the Blades (No derivations)
3.3 Site Selection considerations
3.4 Basic components of a wind energy conversion system (WECS)
3.5 Wind energy collectors (Wind mill)
3.5.1 Horizontal Axis Machines
3.5.2 Vertical Axis Machines
3.6 Advantages & Limitations of WECS.

4.0 Ocean Energy Engineering

4.1 Introduction

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 119

4.2 Ocean Thermal Energy Conversion (OTEC)

4.2.1 Introduction to OTEC
4.2.2 Methods of OTEC
4.2.3 Site Selection for OTEC
4.2.4 Prospects of OTEC in India.
4.3 Tidal Energy
4.3.1 Introduction
4.3.2 Basic Principles of Tidal Power
4.3.3 Components of Tidal Power Plants
4.3.4 Schematic Layout of Tidal Power house
4.3.5 Operation methods of utilization of Tidal energy (single and double basin
arrangement)
4.3.6 Advantages & Limitations of Tidal power
4.3.7 Prospects of Tidal Energy in India.

5.0 Geothermal Energy Engineering

5.1 Introduction
5.2 Nature of Geothermal fields
5.3 Geothermal Sources
5.4 Hydro thermal Sources
5.4.1 Vapour dominated systems
5.4.2 Liquid dominated systems
5.5 Prime movers for geothermal energy conversion

6.0 Bio Energy Engineering

6.1 Introduction
6.2 Biomass conversion techniques
6.3 Biogas Generation.
6.4 Factors affecting biogas Generation
6.5 Types of biogas plants
6.6 Advantages and disadvantages of types of biogas plants

7.0 Direct Energy Conversion Systems

7.1 Magneto Hydro Dynamic Generator

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 120

7.1.1 Introduction
7.1.2 Basic principle
7.1.3 MHD Systems (open cycle & closed cycle)
7.1.4 Advantages of MHD
7.2 Thermo-Electric power
7.2.1 Basic Principles
7.2.2 Thermo electric power generator
7.2.3 Thermo Electric materials & selection of materials
7.3 Thermoionic Generation
7.3.1 Introduction
7.3.2 Thermoionic emission & work function
7.3.3 Basic Thermoionic generator

8.0 Chemical Energy Sources

8.1 Fuel cells
8.1.1 Introduction
8.1.2 Fuel cells – Principles of operation, classification & Types
8.1.3 Applications of fuel cells
8.2 Hydrogen Energy
8.2.1 Introduction
8.2.2 Principles of operation
8.2.3 Applications

Reference:

1. Non conventional Energy sources by G.D.Rai, Khanna Publishers

2. Solar Energy by S P Sukhatme Tata McGraw Hill
3. Solar Energy Utilization G D RaiKhanna Publishers
4. Power Plant Technology by M M EI Wakil ,Tata McGraw Hill

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 121

Table Of Specification for Non Conventional Energy

Sl No Hrs Topic Objective Type Short Answer Type Essay Answer Type Total
45 K C A T K C A HA T K C A HA T 97
Introduction to Non
Conventional Energy
1 2 sources 2 0 0 2 0 2 0 0 2 0 0 0 0 0 4
2 12 Solar Energy 2 3 0 5 0 2 3 0 5 0 4 4 7 15 25
3 6 Wind Energy 0 2 0 2 2 1 0 0 3 2 0 5 0 7 12
4 6 Ocean Energy 2 0 0 2 2 1 0 0 3 2 3 2 0 7 12
5 4 Geo thermal Energy 2 0 0 2 0 2 0 0 2 2 4 0 0 6 10
6 8 Energy for Bio mass 2 1 0 3 1 2 0 0 3 0 0 4 6 10 16
Direct Energy
7 5 Conversion 2 0 0 2 0 2 1 0 3 0 2 3 0 5 10
Chemical Energy
8 4 Storage 0 2 0 2 0 1 0 0 1 2 3 0 0 5 8

Annexure -I Non Conventional Energy

Time Percentage
Sl No Topic K C A HA Total
Allotted(hrs) Weightage

1 Introduction to Non 4.44

Conventional Energy sources 2 2 2 0 0 4
2 Solar Energy 12 26.67 2 9 7 7 25
3 Wind Energy 6 13.33 4 3 5 0 12
4 Ocean Energy 6 13.33 6 4 2 0 12
5 Geo thermal Energy 4 8.89 4 6 0 0 10
6 Energy for Bio mass 8 17.78 3 3 4 6 16
7 Direct Energy Conversion 5 11.11 2 4 4 0 10
8 Chemical Energy Storage 4 8.89 2 6 0 0 8

Xxxxxxxxxxxxxxxxxxxx

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 122

6TH SEMESTER

Course Structure of 6th Semester

Sl NoCode No. Subject Study Evaluation Scheme
Scheme Theory Practical Total Credit
L(Contact
T P ESE Sessional (SS) Pass(E Practic Practica Pass Marks(Th
TA HA Total SE+SS al Test l (PT+PA) eory+Prac
(TA+ ) (PT) # Assess tical)
HA) ment(P
A)@
1 Hu-601 Industrial Management & Entrepreneurship 3 70 10 20 30 33/100 100 3
2 Au-601 Advanced Automobile Engineering 3 3 70 10 20 30 33/100 25 25 17/50 150 4
3 Au-602 Auto Electrical Equipment 3 3 70 10 20 30 33/100 25 25 17/50 150 4
4 Au-603 Design Estimating & Costing 3 3 70 10 20 30 33/100 - - - 100 4
5 Au-611 Project & Seminar 1 6 100 50 50/150 150 3
Au-612 General Viva 1 1 50 - 17/50 50 2
6 Au-610 Professional Practice- IV 1 2 25 25 17/50 50 2
Elective (Any One)
7 Me-604 Metrology 3 70 10 20 30 33/100 100 3
Au-605 Automobile Heavy Equipment 3 70 10 20 30 33/100 100 3
17 2 17
Total 850 25
36

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 123

Course Title : Industrial Management and Entrepreneurship

1. Course Code :Hu – 601
2. Semester :VI
3. Aim of the Course:
1. To acquaint the students with managerial activities
2. To provide introductory knowledge of Cost Accounting
3. To introduce students with industrial legislation
4. To explain the scope for self-employment
5. To compare and contrast different forms of business organization
6. To identify the opportunities to start a small scale industry

4. Course Outcomes:

On completion of the course on IME, students will be able to

 CO 1 = explain managerial activities.

 CO 2 = describe leadership qualities and decision making process.
 CO 3 = state the elements of costs.
 CO 4 = explain important industrial laws.
 CO 5 = define different forms of business organisations
 CO 6 = identify entrepreneurial abilities for self employment through small scale
industries.

5. Teaching Scheme (in hours)

Lecture Tutorial Practical Total

42 hrs 3 hrs -- 45 hrs

6. Examination Scheme:

Theory Practical
Examination Sessional Total
Total Pass Examination Sessional Marks
Full Marks Full Marks Marks Marks
70 30 100 33 -- -- -- -- 100

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 124

7. Detailed Course Content:

Intended Duration
Chapter
Chapter Title Content Learning (in hours)
No.
Outcomes
42 hrs
i) Meaning and Concept i) Explain
Introduction to ii) Functions of Management functions and
1.0 3
Management : iii) Principles of Management principles of
management
i) Definition of Leader i) Develop
ii) Functions of a leader leadership
Leadership Decision iii) Decision making – qualities
2.0 Making & Definition ii) Demonstrate 4
Communication : iv) Decision making process decision making
v) Communication – definition, abilities
importance & types
i) Definition and classification i) State elements
of Cost of costs
Introduction to Cost
3.0 ii) Elements of Cost ii) Explain Break 3
:
iii) Break Even Analysis Even Analysis

i) Meaning of manpower i) State selection

planning procedure of
ii) Recruitment and Selection employees
procedure ii) Distinguish
iii) Payment of wages – factors Time rate and
Human Resource determining the wage Piece rate system
4.0 5
Management: iv) Methods of payment of of wage
wages – Time rate and Piece payments
rate iii) Explain
v) Labour Turnover – definition, causes and
its causes, impact and remedy impact of labour
turnover
i) Need of Industrial legislation i) Identify the
ii) Indian Factories Act – 1948 needs and
– Definition of Factory, main importance of
provisions regarding health, industrial laws
Safety and Welfare of Workers
Industrial
5.0 iii) Industrial Dispute Act – 5
Legislation :
1947 – Definition of Industrial
dispute, Machineries for
settlement of Industrial dispute
in India

i) State the
i) Meaning of Production
objectives and
Production ii) Production Management –
6.0 functions of 3
Management : definition, objectives, functions
Production
and scope
management

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 125

iii) Inventory Management,

Basic idea
i) Meaning and functions of i) state the
marketing functions of
Marketing
7.0 ii) e- Commerce wholesalers and 2
Management:
iii) Channels of distribution retailers
iv) Wholesale and retail trade
i) Definition of i) State the
Entrepreneur and qualities and
Entrepreneurship functions of an
ii) Qualities required by an entrepreneur
Entrepreneur and
8.0 entrepreneur 3
Entrepreneurship:
iii) Functions of an
entrepreneur
iv) Entrepreneurial
motivation
i) Differentiate
i) Sole Trader – meaning, different forms of
main features, merits and Business
demerits organization
Forms of Business ii) Partnership – definition, ii) compare and
9.0 5
Organisation: features, merits and demerits contrast features,
iii) Joint Stock Company – merits and
Definition, types, features, demerits of
merits and demerits different business
organizations.
i) Definition of Micro & i) Define micro
Small enterprises and small
ii) Meaning and enterprises
characteristics of Micro and ii) Explain the
Small enterprise procedure to start
iii) Scope of SSI with a small enterprise
Micro and Small
10.0 reference to self- 4
Enterprises:
employment
iv) Procedure to start SSI –
idea generation, SWOT
analysis
v) Selection of site for
factories
a) Institutional support: i) identify the
i) Introduction supporting
ii) Sources of information agencies to
and required application entrepreneurs
forms to set up SSIs ii) Explain the
Support to
11.0 iii) Institutional support of role of financial 5
Entrepreneurs
various National & State support
level organizations – DICC, organisations
NSIC, IIE, MSME - DI,
Industrial Estates

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 126

b) Financial support: i) Role

of Commercial banks, RRB,
IDBI, ICICI, SIDBI,
NEDFi, and State Financial
Corporations
ii) Special incentives and
subsidies for
Entrepreneurship
Development in the North
East

Class Test 3 hrs

Total 45 hrs

(9) TABLE OF SPECIFICATIONS for Industrial Management & Entrepreneurship

Time
allotted Percentage Compre-
Sl.
Topic in Weightage Application HA
(a) hours hension
No
(c) Knowledge
(b)

Introduction to
1 7 2 3 0 0
Management 3

Leadership & Decision

2 9.5 3 4 0 0
Making 4

3 Introduction to Cost 7 3 2 0 0
3
Human Resource
4 12 6 2 0 0
Management 5

5 Industrial Legislation 12 4 4 0 0
5
6 Production Management 7 3 2 0 0
3

7 Marketing Management 5 4 0 0 0
2

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 127

8 Entrepreneur & 7 3 2 0 0
Entrepreneurship 3

Forms of Business
9 12 3 5 0 0
Organisation 5

Micro & Small

10 9.5 4 3 0 0
Enterprises 4

11 Support to Entrepreneurs 12 4 4 0 0
5

Total 42 100 39 31 0 70

K = Knowledge C = Comprehension A = Application HA = Higher

Than Application (Analysis, Synthesis, Evaluation)
𝑏
C= × 100
∑𝑏

10. Distribution of Marks:

DETAILED TABLE OF SPECIFICATIONS FOR IME

Sl. Topic OBJECTIVE SHORT ANSWER ESSAY TYPE Grand

TYPE TYPE
No
K C A T K C A HA T K C A HA T Total

1 Management 1 0 0 1 1 0 0 0 1 0 3 0 0 3 5

2 Leader &Decisi 1 0 0 1 2 1 0 0 3 0 3 0 0 3 7

3 Cost 1 1 0 2 2 1 0 0 3 0 0 0 0 0 5

4 HRM 2 1 0 3 1 1 0 0 2 3 0 0 0 3 8

5 Laws 3 0 0 3 0 0 0 0 0 1 4 0 0 5 8

6 Product Manage 2 1 0 3 1 1 0 0 2 0 0 0 0 0 5

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 128

7 Market 2 0 0 2 2 0 0 0 2 0 0 0 0 0 4

8 Entrepreneurship 1 1 0 2 2 1 0 0 3 0 0 0 0 0 5

9 Forms of BO 2 1 0 3 0 0 0 0 0 1 4 0 0 5 8

10 MSME 2 0 0 2 0 0 0 0 0 2 3 0 0 5 7

11 Support to Entp. 3 0 0 3 1 0 0 0 1 0 4 0 0 4 8

Total 20 5 0 25 12 5 0 0 17 7 21 0 0 28 70

K = Knowledge C = Comprehension A = Application HA = Higher

Than Application

T = Total

11. Suggested implementation Strategies: Modified syllabus may be implemented with effect from January,
2020 (Starting with the present batch (2018) of 2nd Semester students)

12. Suggested learning Resource:

a. Book list :
Sl. Publisher
Title of Book Name of Author(s)
No.
DhanpatRai& Co. (P)
S.C. Jain Ltd. New Delhi-
1 Industrial Management
H.S. Bawa 110006

S.S. Sarkar Kalyani Publishers,

Business Organisation and
2 R.K. Sharma New Delhi-110002
Entrepreneurship Development
Sashi K. Gupta
S. Chand & Co. Ltd.
3 Entrepreneurial Development S. S. Khanka New Delhi-110055

R.K. Sharma Kalyani Publishers,

4 Business Methods
Shashi K Gupta New Delhi
Entrepreneurship Development and S.K. Kataria& Sons,
5 Dr. R.K. Singhal
Management New Delhi-110002
Business Administration & SahityaBhawan, Agra
6 Dr. S. C. Saksena
Management
SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 129

8
*****

b. List of Journals
c. Manuals
d. Others

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 130

COURSE TITLE: Advanced Automobile Engineering

COURSE CODE : AU 601
SEMESTER : 6th Semester
Contact hours : 45

Rationale : This course is important for the students of Mechanical Engineering (Automobile) to
acquaint with the latest trends and technologies used in automobiles.

Course Outcome: On completion of this course students will be able to-

1. Understand constructional features and working of modern automobile engines.

2. Analyse performance of I.C engines and performance curves.
3. Acquire knowledge on I.C engine fuels, its rating and combustion.
4. Understand different fuel technologies used in modern automobiles, and its prospects and
limitations.
5. Understand working principles of comfort and safety devices in automobiles.
6. Acquire knowledge on automotive emission and its control.

Study Scheme(Contact hours/ week)

Lecture Tutorial Practical Total

3 - 3 6

Evaluation Scheme: Total Credit

Marks
Theory Practical (Theory +
Sessional)

ESE Sessional Pass Practical Practical Pass

Test (PT) Assessment (PT+PA)
TA HA Total ESE+SS (PA)
(TA+HA
) 50/ 150 4

70 10 20 30 33/100 25 25 17/50

Details of contents:
SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 131

1.0 Engine rating and performance: 10

1.1 Engine rating, types of rating, RAC rating, derivation of the RAC horse power, use of RAC rating,
limiting factors in reciprocating engines, rubbing speed, piston displacement, stroke bore relation-
its effects in engine performance (power output characteristics and piston area), compression ratio,
square engine, over square engines.
1.2 Engine performance: IHP, BHP, FHP, relation between BHP & car speed, engine efficiencies,
Mech. Efficiencies, thermal efficiencies, Relative efficiency, performance curve, Otto-cycle,
Atkinson cycle, Diesel cycle, mean effective pressure, heat balance sheet, Morse test,. Methods of
improving engine performance
1.3 Problems on engine performance.
2.0 Fuels: 4
2.1 Classification of fuels, physical and chemical properties of various fuels, qualities of SI engine fuels,
qualities of CI engine fuels. Fuels for CI engines, gas, petrol, kerosene, compressed natural gas
(CNG) and others fuels. Fuels for CI engines- crude oil, LSD, HSD etc.
2.2 Corrosion effect, sulphur in fuel, additives of fuel, normal combustion of the fuel, factors effecting
flame speed, abnormal combustion of the fuel, pre-ignition, detonation or knocking, fuel rating-
Cetane No. , Octane No, Ignition delay, dope etc.

3.0 Theory of Combustion: 3

3.1 Ignition limits
3.2 Stages of combustion in SI engines.
3.3 Ignition lag, effects of engine variables on flame propagation.
3.4 Abnormal combustion- Detonation, pre-ignition, causes and effects of detonation.
3.5 Control of detonation. SI engine combustion chamber
3.6 Stages of combustion in CI engine
3.7 Delay period and its control.
3.8 Diesel knock and its control
3.9 CI engine combustion chamber.
4.0 Valve mechanism of modern engines: 5
4.1 Valves, types of valves mechanism, variable valve timing, 4 valve in a cylinder, disposition of
valves, examples of valves mechanism in modern engines, operating principle of 4 valve mechanism
and 3 valve mechanism in per cylinder in multi cylinder engine(VVT) , valve and camshaft
placement i.e. overhead camshaft engine. Comparison between conventional and other than
conventional valve system.

5.0 Alternative Fuel Technology(Modern Engines): 5

5.1 Wankel rotary-piston engine, construction and principle, comparison of Wankel engine with the
conventional engine in their construction, advantages and disadvantages, Engine with Sleeve valve,
Stirling engine- working principle, Battery cum solar car. Electric vehicle, Hybrid vehicle, Fuel-
cell, Hydrogen vehicle.
5.2 Recent development in Automobile engines and Automobile industry.

6.0 Gas turbines: 4

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 132

6.1 Introduction to gas turbine, its use in automobile, principle of gas turbine applied in automobiles,
constructional details of those engines.
6.2 Prospects and limitations of gas turbines in automobiles.
6.3 Waste heat recovery system- use of waste heat and its advantages (example from gas turbine and
reciprocating I.C. engine).
7.0 Air conditioning: 3
7.1 Introduction, Principles of Automobile Air conditioning, operating conditions, Function of Air-
conditioning system components, Types of control system, Air-conditioning system in cars and
buses. Advantages of Air-conditioning system. Use of refrigerant used in automobile air-
conditioning system and their types. Automatic climate Control.
8.0 Bearings: 3
8.1 Various types of bearings and their uses- Radial bearing, Thrust bearing, Radial thrust bearing; Plain
bearing- Crankshaft journal and main bearing, Connecting rod bearing (Big and small end
bearing),Camshaft bearing, and bushing.
ball bearing, roller bearing - its types and uses. Specific types of bearing used in Automobile
vehicles & their description.

9.0 Automotive Emission and awareness: 5

9.1 Introduction, ecology, air pollution due to Automobile emission, main pollutants from Automobiles,
diesel engine combustion and smoke, types of diesel smoke, factors affecting diesel smoke, Control
of Air pollution from Automobiles –Operation of an evaporative emission control system, Pre-
combustion System, Positive crankcase ventilation system (P.C.V), EGR system, Spark control
system, exhaust emission control system, Catalytic converter and secondary air injection system.
Pollution norms, Effects of air pollution on environment and in human beings, Emission testing and
monitoring devices, noises and its control.
10.0 Safety Devices: 4
10.1 Introduction, safety measures in automobiles, necessity, interior safety and comfort in the
bodywork, safety points for the driver, crumple zone.
10.2 Safety devices: Traction control system, Electronic Stability Programme, Hill descend control,
engine immobiliser, safety belts, Air bags, child lock, rear view camera with reverse parking assist.

11. CLASS TEST 3

Reference Books, Journals:

1. M. L. Mathur& R. P. Sharma: Internal Combustion Engine, DhanpatRai Publications
2. S. V. Hatch: Electronic Engine Controls, Cengage Learning India Pvt. Ltd.
3. Erjavec. Arias : Alternative Fuel Technology, Yes Dee Publishing Pvt. Ltd.
4. Dr. Kripal Singh: Automobile Engineering Vol. I, DhanpatRai& Co.

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 133

TABLE OF SPECIFICATIONS FOR THEORY

Sr. Topic Time Percentage K C A HA T

No (a) allotted in Weightage
hours (c)
(b)
1 Engine rating and performance 9 4 3 5 12
2 Fuels 4 2 4 6
3 Theory of combustion 4 3 5 8
4 Valve mechanism of modern engines 4 1 4 5
5 Alternative Fuel Technology(Modern 2 4
4 6
Engines)
6 Gas Turbines 4 3 5 8
7 Air conditioning 4 3 5 8
8 Bearings 3 2 3 5
9 Automotive Emission and Awareness 4 4 4 8
10 Safety Measures 2 2 2 4
11 Class Test 3 -
Total  b=45 100 70

K = Knowledge C = Comprehension A = Application HA = Higher

𝒃
Than Application (Analysis, Synthesis, Evaluation) C= X100
∑𝒃
DETAILED TABLE OF SPECIFICATIONS FOR THEORY

Sr. Topic OBJECTIVE SHORT ANSWER ESSAY TYPE

TYPE TYPE
No
K C A T K C A HA T K C A HA T

1 Engine rating and performance 2 2 2 2 6

2 Fuels 3 2 2
3 Theory of combustion 3 2 4
4 Valve mechanism of modern engines 2 4
5 Alternative Fuel Technology(Modern 2 2 2
Engines)
6 Gas Turbines 2 2 4
7 Air conditioning 2 1 6
8 Bearings 2 2 2
9 Automotive Emission and Awareness 3 3 3
10 Safety Measures 2 1 2
11 Class Test

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 134

K = Knowledge C = Comprehension A = Application HA = Higher

Than Application

T = Total

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 135

Advanced Automobile Engineering (Lab.)

CODE NO :AU 601
TOTAL hours : 45

1.0 Engine performance Test:

1.1 Morse test of multi cylinder engine. (Minimum 4 cylinder)
1.2 Fuel consumption, Specific fuel consumption, Brake thermal efficiency, Heat balance sheet of multi
cylinder engine, performance curves.

2.0 Measurement of pollutants (Exhaust Gas analysis)

2.1 Petrol engine.
2.2 Diesel engines.

3.0 Determination of kinetic and dynamic viscosity of lubricating oil with viscometer.
4.0 Study of Air conditioning system: testing and servicing equipment, purity test, leak testing and
refilling, service procedure.
5.0 Bearing:
5.1 Identification and inspection of various bearings in Automobiles, bearing play and measurement of
play, study of bearing failure & replacement of bearing.
6.0 Study of the 4 valve mechanism (VVT).
7.0 Study of automobile emission control system:
7.1 Evaporative emission, PCV, EGR, SCR, catalytic converter.
8.0 Alternative fuel Technology:
8.1 Study of hybrid car
8.2 Electric car
8.2 Solar car
9.0 Study of safety devices in automobiles.

10.0 Viva- voce.

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 136

TABLE OF SPECIFICATIONS FOR Practical Test (PT)

Sr. Topic Time Percentage K C A HA T

No (a) allotted in Weightage
hours (c)
(b)
1 Engine performance Test 9 4
2 Measurement of pollutants
6 3
3 Determination of viscosity of lubricants
4 Study of Air conditioning system 3 1
5 Bearing 6 3
6 Study of the 4 valve mechanism (VVT). 6 2
7 Study of automobile emission control
system 6 2
8 Alternative Fuel Technology 9 4
9 Study of safety devices in automobiles 6 2
 b=60 25
11 Class Test
Total

K = Knowledge C = Comprehension A = Application HA = Higher

𝒃
Than Application (Analysis, Synthesis, Evaluation) c= X100
∑𝒃

Annexure-III
WEIGHTAGES TO BE ASSIGNED TO VARIOUS COMPONENTS OF EVALUATION FOR
LABORATORY WORK

S.No. Item * Maximum Marks

Marks Awarded
1. Preparation of Drawing (Process Evaluation) 40
 Ability to carry out experiments following correct
procedure
 Handling of equipment
 Ability to observe and record
 Ability to follow BIS standards
2. Quality of Product (Product Evaluation) 20
 Quality of reporting results
 Ability to interpret results
3. General Behaviour 10
 Care of materials and equipment
 Independence
 Use of working time and space

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 137

4. Viva Voce 30
 Understanding of underlying Concepts, Principles or
Theory
 Critical Judgement/reasoning’
 Ability to draw conclusions and generalizations
5. Total 100

*The external evaluation can be carried out for 100 marks and then proportioned as per the total marks allotted in the
study scheme

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 138

COURSE TITLE: AUTO ELECTRICAL EQUIPMENT

COURSE CODE: AU 602
SEMESTER : 6th
Contact hours : 45

Rationale : Automobiles are comprises of electrical systems consisting of various electrical and
electronics equipment and accessories. This course will help the students to acquire
knowledge of these electrical systems, electrical equipment and accessories.

COURSE OUTCOME:

After completion of this course students will be able to-

1. Understand the basic concepts of electricity, magnetism and automobile wiring.

2. Know the construction of lead acid battery, its characteristics, charging method and
maintenance.
3. Understand the working principle and construction of a starting motor, starting switch etc.
4. Understand the ignition system of an SI engine and various spark advance mechanisms.

Study Scheme(Contact hours/ week)

Lecture Tutorial Practical Total

3 - 3 6

Evaluation Scheme Total Marks Credit

(Theory +
Theory Practical Sessional)

ESE Sessional Pass Practical Practical Pass

Test (PT) Assessment (PT+
TA HA ESE+SS (PA) PA)
Total
(TA+HA) 50/ 150 4

70 10 20 30 33/100 25 25 17/50

Details of Contents:

1.0 Introduction: 2
1.1 Necessity of electrical power in automobile, various electrical equipments.
SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 139

2.0 Storage Batteries: 7

2.1 Purpose of storage batteries, types of storage batteries and their constructional details, cell voltage,
series/parallel connection of cells, battery capacity, battery ratings.
2.2 Charging and Discharging of batteries, electrolyte, chemical changes during charging and
discharging. Slow rate and quick rate of charging, effects of temperature, charging circuits and
components.
2.3 Battery maintenance: Battery life, cleanliness, topping, periodical checks, checking of batteries by
hydrometer and cell testers. Battery troubles-self discharge, sulphation internal shorts- circuiting,
deterioration of plates, cracking, corrosion of terminal and clamps, loss of water, discoloring of
electrolyte- causes and treatment of these troubles, comparison of advantages and disadvantages
amongst the storage batteries.

3.0 Starting system: 7

3.1 Outline of the starting circuit and functions of its various components, starting torque,
factors effecting the starting of engine.
3.2 Cranking motor- types, principle of working, constructional details, components, testing
and maintenance.
3.3 Starting drives- necessity, types, description and constructional details of these drives,
bendix drive, over running.
3.4 Starting motor switches: description, details of constructional of manual switch, solenoid
switch cum shift, solenoid switch with relay, ignition switch- construction,.
3.5 Starting system troubles and remedies.

4.0 Generating system: 8

4.1 Generator function
4.2 Elementary idea about flux due to electric current, Maxwell’s rule for finding the direction of flux
lines, Flemings right hand rule and Lentz’s law, general principle, mutual induction generator
constructional details.
4.3 D. C. Generator, Generator output control, necessity of output, control, methods-details. Generators
regulators, cutout relay, current regulator, voltage regulator, necessity, construction, working
principle of these relays and regulators, testing procedure for generator regulator system, setting of
the regulators-procedures.
4.4 Generator maintenance and servicing, common generator faults, their remedies.
5.0 Alternator: 7
5.1 Principle and constructional details of alternator, alternator output control, regulator type and
working description. alternator output control - electronic type
5.2 Comparison of performance of alternator and generator (advantages and disadvantages).

6.0 Electrical Wiring Systems: 4

6.1 Types of wiring system: Insulated and Earthed return, system, Positive &
negative earth return, wiring harness, wiring colour code.
6.2 Electrical and Electronic Accessories

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 140

Horns: Function and types : Wind type horn, Relay type horn & Double horn
type: their construction, electrical circuit and working
6.3 Indicators & warning devices: Function , construction, working and types of Fuel Gauge, Oil pressure
gauge, Water temperature gauge, Speedometer, odo meter, tachometer, Oil pressure warning light
,Water temperature warning light, Brake warning light , Ignition warning light, engine immobilizer,
central lock, rain sensing wiper, Windshield washer. Power window, electrically adjusted
ORVM.
7.0 Review of the ignition system: 4
7.1 Battery and Coil ignition, magnetic ignition, Electronic ignition system- constructional details of
coils, condenser, distributor, contact.

9.0 Class Test 3

Reference Books, Journals:

5. Automotive Electrical Equipment, Tata MCGraw Hills International Publication
6. B. D. Arora: Automotive Electrical Equipment, R. B. Publications
7. P.L. kohli: Automotive Electrical Equipment, tata McGraw Hill
8. A.K Sweny: Electrical and Electronic Measuring Instrument, DhanpatRai& Sons.
9. S. V. Hatch: Electronic Engine Controls, Cengage Learning India Pvt. Ltd.
10. Dr. Kripal Singh: Automobile Engineering Vol. I, DhanpatRai& Co.
TABLE OF SPECIFICATIONS FOR THEORY

Sr. Topic Time Percentage K C A HA T

No (a) allotted in Weightage
hours (c)
(b)
1 Introduction 2 1 - 1 2
2 Storage Battery 7 2 8 3 13
3 Starting System 7 1 9 3 13
4 Generating System 8 2 8 3 13
5 Alternator 7 1 9 3 13
6 Electrical Wiring System 4 1 3 1 5
7 Electrical and Electronics 4 1 4 1 6
Accessories
8 Review of ignition System 3 1 4 - 5
9 Class Test 3 - - -
Total ∑b=45 100 10 45 15 70

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 141

K = Knowledge C = Comprehension A = Application HA = Higher Than

𝒃
Application (Analysis, Synthesis, Evaluation) C= X100
∑𝒃

DETAILED TABLE OF SPECIFICATIONS FOR THEORY

Sr. Topic OBJECTIVE SHORT ANSWER ESSAY TYPE

TYPE TYPE
No
K C A T K C A HA T K C A HA T

1 Introduction 2
2 Storage Battery 3 2 4 4 8
3 Starting System 3 1 2 4 4 8
4 Generating System 3 1 2 4 4 8
5 Alternator 2 2 4 4 8
6 Electrical Wiring System 2 1 4 4
7 Electrical and Electronics Accessories 2 1 2 3 3
8 Review of ignition System 3 1 3 3
K = Knowledge C = Comprehension A = Application HA = Higher
Than Application T = Total

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 142

AUTO ELECTRICAL EQUIPMENT (LAB)

CODE NO : Au 602

TOTAL hours : 45

1.0 Study Storage Battery:

1.1 Constructional details of a lead acid battery and identification of its components. electrolyte in correct ratio
of acid and distilled water, charging procedure and output voltage. Determination of specific gravity of
electrolyte . Battery rating.
1.2 Constructional details of Nical Cadmium (NicCd) battery, Nickel –Metal Hybrid (NiMH) Batteries and their
circuit diagrams. Charging and testing procedure.
2 Study of starting system

2.1 Identification of the different components of a starting system of an Automobiles and detailed circuit
diagram of the starting system.
2.2 Study of starting drive- Bendix drive, Flo-through type, Pre-engaged type.
2.3 Disassemble a cranking motor, test the armature and field coil (with the help of growler and test lamp),
replace carbon brushes if necessary and assemble it.
2.4 Testing of starting motor for proper functioning.
2.5 Study of different types of starting motor switches, e.g. Manual switch, ignition switch, solenoid switch etc.,
their related circuit diagrams and constructional details. Test the solenoid switch.
3. Study of generating System:

3.1 Disassembling and assembling of D.C. generator used in automobiles. Servicing and testing of the generator.
Study of circuit diagram.

3.2 Disassemble and assemble of an alternator used in automobiles. Identification of various components of an
alternator. Servicing and testing of the alternator. Study of circuit diagram

4. Study of wiring system and the colour coding of wires in an automobile.

5. Study of electronic ignition system- circuit diagram, identification of different components of electronic
ignition system and test the system with digital volt-ohmmeter or digital multimeter

6. Study of electrical accessories:

6.1 Electric horn circuit, test and tune the horn.

6.2 Wiper motor, power window, central lock, rain sensing wiper, Windshield washer. Power

window, electrically adjusted ORVM, defogger.

7. Viva-Voce

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 143

COURSE TITLE : DESIGN ESTIMATING AND COSTING

COURSE CODE : AU 603

SEMESTER : 6th Semester

Contact hours : 60

Rationale : Knowledge of design drawing and estimation is very essential for engineering students.
This course is to develop knowledge and skill to automotive parts design and production.

Course Objectives: On completion of this course students will be –

1. Understand the preliminary steps for designing of automobile parts viz. shaft, bearing, flywheel etc.
2. Layout of piston, injector, pumps, springs, connecting rod, crankshaft etc.
3. Explain the important elements of estimation and costing.
4. Estimate the cost of sheet metals and fabrication.
5. Determine surface area, volume and weight of mechanical parts.
6. Estimate materials, machining time and preparation of bill of materials for jobs/parts.

Study Scheme(Contact hours/ week)

Lecture Tutorial Practical Total
3 - 3 6

Evaluation Scheme: Total Credi

Marks(Theory t
+ Sessional)
Theory Practical

ESE Sessional Pass Practical Practical Pass

TA HA ESE+SS Test (PT) Assessment (PT+PA)
Total (PA) 33/ 100 5
(TA+HA
)
70 10 20 30 33/100

DETAILS OF CONTENTS:

1.0 Basic Design Approach 10

1.1 Introduction, classification of design, design considerations.
1.2 Types of shafts, Standard sizes, Stresses in shafts, Maximum Permissible stresses, Design of shafts
subjected to Twisting and Bending Moment.
1.3 Co-efficient of fluctuation of speed and energy, maximum fluctuation of energy and energy stored
in a flywheel.
1.4 Classification of bearings, Terms used in Hydrodynamic Journal bearing---Somerfield no., co-
efficient of friction etc.
2.0 Layout of Automobile Engine parts: 10
2.1 IC engine piston with rings and gudgeon pin
SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 144

2.2 Shafts keys

2.3 Connecting rod
2.4 Coil spring and leaf spring.
2.5 Fuel pumps
2.6 Injector
2.7 Parts of transmission system
3.0 Bill of Materials: 2
3.1 Preparation of bill of materials for automobiles parts using standard parts and tables/chart for bill of
materials
4.0 Estimating and Costing: 4
4.1 Definitions, Difference between Estimating and Costing, Organization of estimating department,
Aims of costing, errors & Standard cost, Procedure of costing.
4.2 Elements of Estimating and Costing in details, numerical problem to find out total cost, selling price.
Depreciation- Classification, methods of calculating depreciation.
5.0 Mensuration: 8
5.1 Calculation of surface areas and figures by Simpson’s rule, Trapezoidal rule, Planimeter and
Guldinus rule.
5.2 Volumes and surface areas
6.0 Estimating of Machining Time Calculation: 8
6.1 Estimation of material and machining time for Turning (Simple turning, Knurling, Facing
Chamfering, drilling, boring, Reaming Threading & Tapering) Milling, Shaping,
6.2 Cost determination:
7.0 Estimating and costing of sheet metal: 10
7.1 Estimating and costing of sheet metal work, edge stiffening processes, blanking.
8.0 Estimating and Costing of fabrication: 5
8.1 Fabrication including welded parts- techniques, welding time (By gas welding and arc welding) of
chassis frame, bus passenger seat, fuel tank, truck body, cost estimation.

9.0 CLASS TEST 3

NOTE: Written examination question paper is of 4 hours duration

Reference Books:-

1. S.C Banger :Mechanical estimating and costing

2. R.S. Khurmi&J.K.Gupta: Machine Design, S.Chand& Company Ltd.
3. R.B. Gupta: Machine Drawing
4. TTTI, Madras publication :Mechanical Estimating and Costing

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 145

TABLE OF SPECIFICATIONS FOR THEORY

Sr. Topic Time Percentage K C A HA T

No (a) allotted Weightage
in hours (c)
(b)
1 Basic Design Approach 10 2 10 3 15
2 Layout of Automobile Engine
8 7 3 10
parts
3 Bill of Materials 2 - - 2 2
4 Estimating and Costing 8 1 7 2 10
5 Mensuration 8 2 6 2 10
6 Estimating of Machining Time
7 2 5 1 8
Calculation
7 Estimating and Costing of
7 2 5 1 8
fabrication
8 Estimating and costing of sheet
7 1 5 1 7
metal
9 Class Test 3 - - - -
Total ∑b=60 100 10 45 15 70

K = Knowledge C = Comprehension A = Application HA = Higher Than Application (Analysis,

𝑏
Synthesis, Evaluation) C= X100
∑𝑏

DETAILED TABLE OF SPECIFICATIONS FOR THEORY

Sr. Topic OBJECTIVE SHORT ANSWER ESSAY TYPE

TYPE TYPE
No
K C A T K C A HA T K C A HA T

1 Basic Design Approach 6 1 7 2 6

2 Design and Drawing of 2 10
Automobile Engine parts
3 Bill of Materials 1 1 2
4 Estimating and Costing 2 2 4 2 4
5 Mensuration 2 1 3 6
6 Estimating of Machining Time 3 3 2 4
Calculation
SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 146

7 Estimating and Costing of 3 3 2 4

fabrication
8 Estimating and costing of sheet 2 2 3
metal

K = Knowledge C = Comprehension A =Application HA =Higher Than Application

T = Total

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 147

COURSE TITLE : Project& Seminar

COURSE CODE : AU 611

SEMESTER : 6th Semester

Contact hours : 120

Rationale :. Develop students to deal with engineering problems or projects individually or

collectively with theacquired technical knowledge and skill.

Course Objectives:

 Apply acquired technical knowledge and skill to solve problems involving design,
manufacturing, installation, testing and maintenance of machines.
 Prepare models using the acquired technical knowledge and skill.
 Apply systematic methodology in studying engineering problems or systems..
 Analysis results with the help of charts, tables, graphs etc. .
 Prepare project report & power point presentation.

Study Scheme(Contact hours/ week)

Lecture Tutorial Practical Total
- 1 6 7

Evaluation Scheme: Total Credi

Marks(Theory t
+ Sessional)
Theory Practical
ESE Sessional Pass Practical Practical Pass
TA HA Total ESE+SS Test (PT) Assessment (PT+PA)
(TA+HA (PA) 50/ 150 3
)
100 50 50/150
DTAILS OF CONTENTS:

Here it is required for the concerned teacher to take the students in different Auto-workshop. Show the actual working
carried out in the field. Visit to the local industries. Design of single cylinder petrol/diesel engine with complete
working drawing. Transmission, Ignition systems- Design with drawing. Any project related to Automobile
engineering and availability of materials.

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 148

Annexure-V
WEIGHTAGES TO BE ASSIGNED TO VARIOUS COMPONENTS OF EVALUATION FOR PROJECT
WORK
S.No. Item * Maximum Marks
Marks Awarded
1. Nature of the Project 10
 Relevance
 Novelty
 Degree of Challenge involved
2. Quality of Product 40
 Dimensions
 Shape
 Tolerance limits
 Cost effectiveness
 Usability/Feasibility
 Modernity
 Meeting BIS standards
3. Quality of report 30
 Clarity of presentation and organization
 Language and style
 Quality of diagrams, drawings and graphs
 Listing of cross reference/Bibliography
 Suggestions for further studies
4. Quality of Presentation/Viva Voce 20

 Understanding of concepts, design, methodology, results,

implications etc.
 Communication skills
 Ability to draw conclusions and generalization
5. Total 100
*The external evaluation can be carried out for 100 marks and then proportioned as per the total marks allotted in
the study scheme

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 149

PROFESSINAL PRACTICE- IV
COURSE CODE : AU 610
SEMESTER : 6th Semester
Contact hours : 15

Rational :

To develop general confidence, ability to communicate and attitude, in addition to basic technological concepts
through Industrial visits, expert lectures, seminars on technical topics and group discussion.

Course Outcomes: Student will be able to:

 Acquire information from different sources.
 Prepare notes for given topic.
 Present seminar in a given topic.
 Interact with peers to share thoughts.
 Prepare a report on industrial visit, expert lecture

Study Scheme(Contact hours/ week)

Lecture Tutorial Practical Total
1 - 2 3

Evaluation Scheme: Total Credi

Marks(Theory t
+ Sessional)
Theory Practical

ESE Sessional Pass Practical Practical Pass

TA HA ESE+SS Test (PT) Assessment (PT+PA)
Total (PA) 33/ 100 2
(TA+HA
)
25 25 17/50

Contents/ Activities:

1. INDUSTRIAL VISITS 8

Structured industrial visits be arranged and report of the same shall be submitted by the individual student, to form a
part of the term work. (1 visits) Following are the suggested types of Industries/ Fields –
i. Automobile manufacturing / auto component manufacturing units to observe the working of SPM
ii. Refrigeration and air conditioning manufacturing / servicing units / industries / workshops
iii. Automobile service stations for four wheelers
iv. Auto Engine Testing unit to gather details regarding the testing procedures/parameters etc.

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 150

v. Automotive Research Association of India, Pune, Central Iinstitute of Road Transport, Pune, Vehicle
Research and Development establishment , Ahmednagar.
vi. Engine testing, exhaust gas analysis and vehicle testing
vii. Safety museum at Central Labour Institute, Sion, Mumbai.
viii. Auto heavy equipment service center.
2. THE GUEST LECTURE/S 8

From field/industry experts, professionals to be arranged (2 Hrs duration), minimum 2 nos. from the following or alike
topics. The brief report to be submitted on the guest lecture by each student as a part of Term work
a) Electronic fuel injection systems
b) Exhaust gas analysis.
c) Vehicle testing.
d) Transducer application in automobiles.
e) Environmental pollution & control.
f) Vehicle aerodynamics & design.
g) Earth moving machines.
h) Automobile pollution, norms of pollution control.
i) Nanotechnology
j) Programmable logic controllers
k) TQM
l) Hybrid motor vehicles
m) Packaging technology
n) Appropriate technology
o) Six sigma systems
p) Alternative fuel Technology.

3. GROUP DISCUSSION: 4

The students should discuss in group of six to eight students and write a brief report on the same, as a part of term
work. The topic of group discussions may be selected by the faculty members. Some of the suggested topics are (any
one) –
i. CNG versus LPG as a fuel
ii. Fuel saving techniques.
iii. Petrol versus Diesel as a fuel for cars.
iv. Trends in automobile market.
v. Rain water harvesting.
vi. Trends in refrigeration Technology.
vii. Disaster management.
viii. Safety in day to day life.
ix. Energy Saving in Institute.
x. Nano technology.
xi. Current affairs.
4. SEMINAR: (ANY 1 TOPIC) 8

Seminar topic should be related to the subjects of 6th semester / resent advances on automobile engineering / topics
from guest lectures. Students shall submit a report of at least 10 pages and deliver a seminar (Presentation time - 10
minutes for a group of 2 students)

5. STUDENT ACTIVITIES: 5

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 151

Students in a group of 3 to 4 shall perform any one of the following activities (Other similar activities may be
considered) and write a report as a part of term work.
ACTIVITIES:-
1. Collection of data regarding loan facilities or other facilities available through different organizations / banks
to budding entrepreneurs
2. Survey and interviews of successful entrepreneurs in nearby areas.
3. Survey of opportunities available in thrust areas identified by Government or DIC.
4. Measuring Screw thread parameters on floating carriage dial micrometre and select the optimum diameter of
wire.
5. Survey of farm implements used by farmers.
6. Survey of properties of fuels.

Text Books:

1. Mark Ratner and Daniel Ratner: Nanotechnology -Pearson Educatuion, New Delhi
2. YoramKorem:Computer Control of Manufactring System- Mcgraw Hill Publication
3. Sunil Chopra, Peter Meindl:Supply Chain Management - Pearson Educatuion, New Delhi.
.

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 152

Course Title :METROLOGY

Subject Title : Metrology
Subject Code : ME-604
Hours Per Week : 03
Hours Per Semester : 45
Class Test : 03
Total Class : 48
Total Marks : 100
Theory : 70
Sessional : 30
Class hours L T P
3 0 0
Pre requisite: Engineering Mechanics , Manufacturing Technology, Strength of Materials, Engineering Materials

Outcome based Course Objectives

On the completion of the course the students should be able to:

1.Illustrate the principle of operation and calibration of an instrument.

2. Know different measuring device for a particular application.
3. Explain the concepts of limits, fits and tolerance
4. Explain various device and tools for angular measurements
5 Know the various comparators with their working principles and applications
6. Explain the different devices used to measure screw threads,gears
7 Explain the different devices used to measure textures and surface finish
8 Explain the different techniques and devices used to measure a groove, bores, ring
and plug gauges

COURSE CONTENTS

1.0 Metrology concepts and standards

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 153

1.1 Definition of Metrology

1.2 Significance of measurement,
1.3 Standards of measurements-line standard, wavelength standard
1.4 Factors in selecting the measuring instruments
1.5 Terms applicable to measuring instruments: Precision and Accuracy, Sensitivity and
Repeatability, Range, Threshold, Hysteresis, calibration and magnification
1.6 Errors in Measurements: Classification of errors, Systematic and Random error.
1.7 Handling and care of Measuring instruments
1.8 Objects of Metrology - ISO and ISI specifications

2.0 Basic Precise and Non Precise Measuring instruments

2.1 Introduction
2.2 Thread measurements: Thread gauge micrometer
2.3 Angle measurements: Bevel protractor, Slip gauges, Sine Bar
2.4 Use, Sizes, Care of slip gauges and Sine Bar
2.5 Gauges: plain plug gauge, ring Gauge, snap gauge, limit gauge
2.6 Verniercaliper , Vernier height gauge , Vernier depth gauge
2.7 Outside Micrometer, Inside Micrometer
2.8 solving small problems using slip gauges, sine bar

3.0 Limits, Fits, Tolerances and Gauges

3.1 Limit: Maximum limit, Minimum limit, Basic size, Nominal size
3.2 Fit: Types of fits -Hole basis and Shaft basis system
3.3 Tolerance: Basic terminology, unilateral and bilateral tolerance
3.4 Interchangeability and selective assembly
3.5 Symbols
3.6 Solving problems on limit, fit and tolerance
4.0 Angular Measurements

4.1 Concept of Angular measurements

4.2 Construction and working of Bevel protector, Sine Bar, Angle Gauges,
4.3 Clinometer-different types of Clinometer

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 154

4.3 Autocollimator- principle and application

4.4 Use of Straight Edges and Rollers
4.4 Solving problems on angular measurement using sine bar

5.0 Comparators
5.1 Principle and operation of various comparators
5.2 Types-Mechanical, Electrical, Optical, Pneumatic comparators
5.3 Relative advantages and disadvantages of various comparators
5.4 Characteristics of a good comparator

6.0 Screw Thread Measurement

6.1 Terminology of screw thread

6.2 Measurement of external and core diameter
6.3 Testing of leads, thread angle and thread profile
6.4 Use of screw thread micrometer, tool makers microscope, optical profile projector

7.0 Gear Measurement

7.1 Terminology of gears
7.2 Measurement of chordal thickness, addendum using gear tooth vernier
7.3 Parkinson’s gear tester

8.0 Surface Finish Measurement

8.1 Terminology
8.2 Primary and secondary texture, CLA, RMS and RA value
8.3 Use of Straight edges and surface plates (Wedge method and Level method)
8.4 Principle and operation of Stylus probe instruments

9.0 Machine tool metrology

9.1 Testing instruments for machine tools alignment testing

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 155

9.2 Checking Parallelism, Straightness, flatness, squareness ,alignment testing of machine tool as per
IS standard procedure.
9.3 Test for level of installation

10.0 MISCELLANEOUS MEASUREMENTS

10.1 Checking size of a groove
10.2 Gauging Large bores with point gauge and by four ball method
10.3 Gauging Small bores by two and three spheres method
10.4 Measuring taper ring & plug gauge

Table Of Specification for Metrology

Sl No Hrs Topic Objective Type Short Answer Type Essay Answer Type Total
45 K C A T K C A HA T K C A HA T 97
Metrology Concept &
1 4 Standards 1 1 2 1 1 2 2 2 4 8
Basic Precise and Non
Precise Measuring
2 5 Instruments 1 1 2 1 1 2 3 2 2 7 11

Limits Fits and

3 5 Tolerances and Gauges 1 1 2 1 1 2 2 3 2 7 11
Angular
4 4 Measurements 1 1 2 1 1 2 3 2 5 9
5 5 Comparators 1 1 2 1 1 2 2 3 2 7 11
Screw Thread
6 4 Measurements 1 1 2 1 2 2 2 1 5 9
7 5 Gear Measurement 1 1 2 1 2 2 3 7 11
Surface Finish
8 5 Measurement 1 1 2 1 1 1 3 2 2 2 6 11
Machine Tool
9 4 Metrology 1 1 2 1 1 2 2 2 4 8
Miscellaneous
10 4 Measurement 1 1 2 1 1 2 2 2 4 8

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 156

Annexure -I Metrology

Time Percentage
Sl No Topic K C A HA Total
Allotted(hrs) Weightage
Metrology Concept &
1 8.89
Standards 4 1 4 3 8

2 Basic Precise and Non Precise 11.11

Measuring Instruments 5 0 5 4 2 11
Limits Fits and Tolerances
3 11.11
and Gauges 5 0 4 4 3 11
4 Angular Measurements 4 8.89 0 5 4 9
5 Comparators 5 11.11 1 3 4 3 11

6 8.89
Screw Thread Measurements 4 4 4 1 9
7 Gear Measurement 5 11.11 4 1 3 8
8 Surface Finish Measurement 5 11.11 1 4 3 3 11
9 Machine Tool Metrology 4 8.89 1 3 3 1 8

10
Miscellaneous Measurement 4 8.89 4 4 8

REFERENCES

1. Metrology& Measurement” by Anand K Bewoor,Vinaykulakarni ,Tata McGraw hill New delhi 2009
2. “Principles of Engineering metrology” by RegaRajendraJaico publishers-2008
3. “Engineering Metrology” by R.K.Jain, Khanna Publishers, 1994.
4. “Mechanical Measurements and Instrumentation “ by R K Rajput, pub-S K Kataria& sons

Xxxxxxxxxxxxxxxxxxxxx

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 157

COURSE TITLE: Automobile Heavy Equipment

COURSE CODE : Au 605
SEMESTER : 6th Semester
Contact hours : 45

Rationale : This course is to make the students acquainted with and understand the
construction and operation of various automobile heavy equipment used in
different industries especially in infrastructure development sectors.

Objective of the course: On completion of the course students will be –

1. Understand the construction and operation of heavy equipment viz. tractors, dumpers, graders, compactors,
dozers, loaders, excavators, cranes, scrapers, lift trucks, Dredgers, tanker Carriers.
2. Explain the different components of a hydraulic system utilized in a hydraulically operated heavy vehicle.
3. Understand the importance of maintenance and safety measures of heavy equipment.

Study Scheme(Contact hours/ week)

Lecture Tutorial Practical Total

3 - - 3

Evaluation Scheme Total Credit

Marks
Theory Practical (Theory +
Sessional)

ESE Sessional Pass Practical Practical Pass

Test (PT) Assessment (PT+PA)
TA HA Total ESE+SS (PA)
(TA+HA)
33/ 100 3
70 10 20 30 33/100

DETAILS OF CONTENTS:

1.0 Tractors: 5
1.1 Types of tractors (wheel and crawler), purpose of tractors, tractors for earth moving, their
constructional features and working operations and uses.
1.2 Clutches, gear box, torque converter, differential, final drive, PTO shaft, draw bar, wheel
(constructional features).
1.3 Steering system of both the types of tractor and their differences

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 158

1.4 Tractor ground drive components, various power outlet units.

1.5 Care and maintenance tractors.
2.0 Hydraulic system: 4
2.1 hydraulic symbol and its importance,hydraulic circuit diagram (basic), introduction on hydraulic
pressure measuring gauges, hydraulic transmission, hydraulic oil and its properties.
2.2 hydraulic component, gear pump, piston pump(axial piston pump),gear motor, piston motor, pump
regulator, relief valve, spool(direction control valve and flow control valve), hydraulic actuator -
liner & rotary, difference between hydraulic pressure and hydraulic flow, difference between
hydraulic pump and hydraulic motor
3.0 DDump tractors and articulated hauler:
3
3.1 Descriptions, function and uses, on the road and off the road vehicles.
3.2 Constructional features; body box, tail gate, hoist, trailers, bottom dump, side dump.
3.3 Care and maintenance of dumpers.

4.0 Motor Graders: 3

4.1 Descriptions, constructional features, functions and uses.
4.2 Care and maintenance of graders.

5.0 Compactors( Rollers): 4

5.1 Concept of soil stabilization, method/steps involved in soil stabilization
5.2 Types, Descriptions, constructional features, functions and uses of compactors.
5.3 Care and maintenance of compactors.

6.0 Dozers: 5
6.1 Types, Descriptions, constructional features, working, functions and uses.
6.2 Bull-dozers; blade, push arm, hydraulic lift, pitch arm, mechanical tilt, power tilt, constructional
valve, transmission (power), steering mechanism.
6.3 Cable controlled Bull-dozer and hydraulically controlled operating system in bulldozer
6.4 Care and maintenance.

7.0 Loaders: 4
7.1 Descriptions, constructional features, functions and uses.
7.2 Tractor loader, belt loader basic shovel crawler mounted and truck mounted-slide shovel, dipper
shovel, revolving shovel.
7.3 Care and maintenance of loaders.
8.0 Excavators: 6
8.1 Function and types: Crawlermountedand truckmounted, Hydraulic excavator; construction,
working, operations etc.
8.2 Shovels: Basicshovel operations, construction, and attachments.
8.3 Dipper shovel, Drag shovel, Dragline, Clamshell: their basic parts, working and operations.
9.0 Cranes: 5
9.1 Descriptions, functions and uses.
9.2 Mobile, stationary, overhead and tower cranes, their working, basic parts, and uses

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech(Auto) 159

9.3 Care, maintenance of cranes and safety precautions.

10.0 Scrapers: 3
10.1 Constructional features, working operation and applications.

11.0 Lift trucks: 2

11.1 Description, function and uses.
11.2 Fork lift-both engine and battery operational, their constructional features and uses.
11.3 Care and maintenance of lift trucks.

12.0 Dredgers 2
12.1 Construction and operations, types- Dipper dredger, Ladder dredger, Suction dredger

13.0 Tanker Carrier: 1

13.1 Constructional description, function, uses, repair and maintenance.
14.0 Class Test 3

Reference Book, Journal, Manuals etc.:

11. S.C. Sharma: Construction Equipment and Management, Khanna publishers.
12. Sourabh Kumar Soni:Construction Management and Equipment, KATSON
13. Dr. V.M. Domkundawar: Automobile Engineering, DhanpatRai& Co.
14. C. P. Nakra: Basic Automobile Engineering, DhanpatRai Publications

SCTE,Assam l JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech.(Auto) 160

TABLE OF SPECIFICATIONS FOR THEORY

Sr. Topic Time allotted Percentage K C A HA T

N (a) in hours Weightage
o (b) (c)
1 Tractors 5 10 1 5 2 6
2 Hydraulic system 4 14 1 3 1 8
3 Dump Tractor 3 6 1 3 2 4
4 Graders 3 6 1 3 1 5
5 Rollers 4 8 1 1 2 6
6 Dozers 5 10 1 5 2 8
7 Loaders 4 4 - 4 1 4
8 Excavators 6 10 1 5 2 8
9 Cranes 5 10 1 4 1 8
10 Scrapers 3 8 1 4 - 5
11 Lift Trucks 2 6 - 4 - 3
12 Dredgers 2 4 - 4 - 3
13 Tankers 1 4 1 - 1 2
14 Class Test 3 - - - -
Total ∑b=45 100 10 45 15 70

K = Knowledge C = Comprehension A = Application HA = Higher Than Application (Analysis,

𝑏
Synthesis, Evaluation) C= X100
∑𝑏

DETAILED TABLE OF SPECIFICATIONS FOR THEORY

Sr. Topic OBJECTIVE SHORT ANSWER ESSAY TYPE
TYPE TYPE
No
K C A T K C A HA T K C A HA T

1 Tractors 2 2 2 5
2 Hydraulic 3 1 3 2 5
system
3 Dump 1 1 2 3
Tractor
4 Graders 1 1 2 5
5 Rollers 2 1 3 2 5
6 Dozers 2 2 2 4
7 Loaders 1 1 2 4

SCTE,Assam | JANUARY,2019
 New Syllabus 3rd sem. to 6th Sem. Mech.(Auto) 161

8 Excavators 3 3 2 5
9 Cranes 3 3 2 5
10 Scrapers 2 2 2 5
11 Lift Trucks 1 1 2 4
12 Dredgers 1 1 2 3
13 Tankers 1 1 2 3
K = Knowledge C = Comprehension A = Application HA = Higher
Than Application

T = Total

xxxxxxxxxxxxxxxxxxxxxxxxx

SCTE,Assam | JANUARY,2019