Data sheet
PRO DCDC 480W 24V 20A Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 26
D-32758 Detmold
Germany
www.weidmueller.com
The DC/DC converter compensates for voltage fluctua-
tions, such as those that occur with unregulated power
supplies or long cables. With galvanic isolation and pro-
tection class III for earth-free systems, the DC/DC convert-
er is particularly suitable for use in independent supply
systems. The space-saving module can optimally convert
voltage levels, offers above-average power performance,
comprehensive safety functions, and a high efficiency of
up to 95 %.
General ordering data
Version DC/DC converter
Order No. 2001820000
Type PRO DCDC 480W 24V 20A
GTIN (EAN) 4050118384000
Qty. 1 pc(s).
Creation date September 29, 2024 9:33:27 PM CEST
Catalogue status 14.09.2024 / We reserve the right to make technical changes. 1
Data sheet
PRO DCDC 480W 24V 20A Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 26
D-32758 Detmold
Germany
www.weidmueller.com
Technical data
Dimensions and weights
Depth 120 mm Depth (inches) 4.724 inch
Height 130 mm Height (inches) 5.118 inch
Width 75 mm Width (inches) 2.953 inch
Net weight 1,300 g
Temperatures
Storage temperature -40 °C...85 °C Operating temperature -25 °C...70 °C
Humidity at operating temperature 5...95 %, no condensation Humidity 5...95 %, no condensation
Input
Connection system DC input voltage range 14...32 V (during opera-
tion), 18...32 V (commis-
Screw connection sioning)
Input fuse (internal) Yes Inrush Current Limitation Yes
Inrush current max. 30 A Nominal power consumption 516.1 VA
Rated input voltage Recommended back-up fuse 40 A, Char. B circuit break-
er, 40 A, Char. C circuit
24 V DC breaker
Output
Capacitive load unrestricted
Connection system Screw connection
Continuous output current @ UNominal 20 A @ 60 °C, 24 A @ 45°C, 15 A @ 70°C
DCL - peak load reserve Multiple of the rated current 150 %
Boost duration 5s
Multiple of the rated current 200 %
Boost duration 200 ms
Multiple of the rated current 300 %
Boost duration 100 ms
Multiple of the rated current 400 %
Boost duration 50 ms
Multiple of the rated current 600 %
Boost duration 20 ms
Mains failure bridge-over time Mains failure bridge-over time, min. 10 ms
Input voltage type DC
Input voltage 24 V
Output current 20 A
Output voltage 24 V
Nominal output current for Unom 20 A @ 60 °C
Output current 20A
Output power 480 W
Output voltage, max. 29.5 V
Output voltage, min. 22.5 V
Output voltage, note (adjustable via potentiometer on front)
Overload protection Yes
Parallel connection option yes, max. 3
Protection against inverse voltage Yes
Ramp-up time ≤ 9 ms (Uout: 10%...90%)
Rated output voltage 24 V DC ± 1 %
Residual ripple, breaking spikes ≤ 20 mVPP @full load
Creation date September 29, 2024 9:33:27 PM CEST
Catalogue status 14.09.2024 / We reserve the right to make technical changes. 2
Data sheet
PRO DCDC 480W 24V 20A Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 26
D-32758 Detmold
Germany
www.weidmueller.com
Technical data
General data
Adjacent No Clip-in foot metal
Current limiting 150% Iout Degree of efficiency typ. > 93%
Housing version Metal, corrosion resistant Humidity 5...95 %, no condensation
Max. perm. air humidity (operational) Mounting position, installation notice Horizontal on TS35 mount-
ing rail. 50 mm of clear-
ance at top & bottom
for air circ. Can mount side
by side with no space in
between., 50 mm clear-
ance at top and bottom for
free air circulation, mount-
able side by side without
5 %…95 % RH clearance
Power loss, idling 3W Power loss, nominal load 40 W
Protection against over-heating Protection against reverse voltages from
Yes the load 33…34 V DC
Protection degree IP20 Short-circuit protection Yes
Start-up ≥ -40 °C Surge voltage category III
EMC / shock / vibration
Interference immunity test acc. to EN 61000-4-2 (ESD), EN Limiting of mains voltage harmonic cur-
61000-4-4 (burst), EN rents
61000-4-5 (surge), EN
61000-4-6 (conducted), According to EN
EN61000-4-3 (HF field) 61000-3-2
Noise emission in accordance with Shock resistance IEC 60068-2-27
EN55032 Class B 30 g in all directions
Vibration resistance IEC 60068-2-6 2.3 g (15 Hz…150 Hz)
Insulation coordination
Insulation voltage input / earth 1.5 kV Insulation voltage output / earth 0.5 kV
Insulation voltage, input/output 1.5 kV Pollution severity 2
Protection class III Surge voltage category III
Electrical safety (applied standards)
Electrical machine equipment For use with electronic equipment Acc. to EN50178 /
Acc. to EN60204 VDE0160
Protection against dangerous shock cur- Protective separation / protection VDE0100-410 / acc. to
rents Acc. to VDE0106-101 against electrical shock DIN57100-410
Safety extra-low voltage SELV acc. to IEC 60950-1, Safety transformers for switch-mode
PELV according to EN power supplies According to EN
60204-1 61558-2-16
Connection data (input)
Conductor cross-section, AWG/kcmil , Conductor cross-section, AWG/kcmil ,
max. 8 AWG min. 22 AWG
Conductor cross-section, flexible , min. 0.5 mm² Conductor cross-section, rigid , max. 16 mm²
Conductor cross-section, rigid , min. 0.5 mm² Connection system Screw connection
Number of terminals 2 (+,−) Reverse polarity protection Yes
Tightening torque, max. 1.5 Nm Tightening torque, min. 1.2 Nm
Wire connection cross section, flexible
(input), max. 16 mm²
Creation date September 29, 2024 9:33:27 PM CEST
Catalogue status 14.09.2024 / We reserve the right to make technical changes. 3
Data sheet
PRO DCDC 480W 24V 20A Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 26
D-32758 Detmold
Germany
www.weidmueller.com
Technical data
Connection data (output)
Conductor cross-section, AWG/kcmil , Conductor cross-section, AWG/kcmil ,
max. 10 AWG min. 26 AWG
Conductor cross-section, flexible , max. 6 mm² Conductor cross-section, flexible , min. 0.18 mm²
Conductor cross-section, rigid , max. 6 mm² Conductor cross-section, rigid , min. 0.18 mm²
Connection system Screw connection Number of terminals 10 (+ / - / signal)
Reverse polarity protection Yes Tightening torque, max. 0.5 Nm
Tightening torque, min. 0.4 Nm
Connection data (signal)
Number of terminals 5 Wire connection method Screw connection
Signalling
Contact load (NO contact) max. 30 V DC / 0.5 A, Floating contact
max. 50 V AC / 0.3 A Yes
Relay on/off Transistor output, positive-switching DC OK: 20 mA max., short-
circuit-proof, I > 90%:
20 mA max., short-cir-
Output voltage > 21.6 V / cuit-proof, Low UIN: 20 mA
<20.4 V max., short-circuit-proof
Classifications
ETIM 6.0 EC002540 ETIM 7.0 EC002540
ETIM 8.0 EC002540 ETIM 9.0 EC002540
ECLASS 9.0 27-04-07-01 ECLASS 9.1 27-04-07-01
ECLASS 10.0 27-04-07-01 ECLASS 11.0 27-04-07-01
ECLASS 12.0 27-04-07-01 ECLASS 13.0 27-04-90-02
ECLASS 14.0 27-04-07-01
Environmental Product Compliance
REACH SVHC Lead 7439-92-1
SCIP 6d8cdf22-8230-4af8-86c8-3558c716666d
RoHS Compliance Status Compliant with exemption
RoHS Exemption (if applicable/known) 7a, 7cI
Approvals
Approvals
ROHS Conform
UL File Number Search UL Website
Certificate no. (cULus) E258476
Certificate no. (cULusEX) E470829
Creation date September 29, 2024 9:33:27 PM CEST
Catalogue status 14.09.2024 / We reserve the right to make technical changes. 4
Data sheet
PRO DCDC 480W 24V 20A Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 26
D-32758 Detmold
Germany
www.weidmueller.com
Technical data
Downloads
Approval/Certificate/Document of Con- ABS Certificate.pdf
formity DNV Certificate.pdf
LR Certificate.pdf
PRO DCDC 480W 24V 20A UL508 CSA C22.2.pdf
PRO DCDC UL Class 1,Div.2.pdf
BV Certificate
Declaration of Conformity
Engineering Data CAD data -- STEP
User Documentation Operating Instructions
Catalogues Catalogues in PDF-format
Creation date September 29, 2024 9:33:27 PM CEST
Catalogue status 14.09.2024 / We reserve the right to make technical changes. 5
Data sheet
PRO DCDC 480W 24V 20A Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 26
D-32758 Detmold
Germany
www.weidmueller.com
Drawings
Derating curve Signal states
UI characteristic curve Switching symbol
Creation date September 29, 2024 9:33:27 PM CEST
Catalogue status 14.09.2024 / We reserve the right to make technical changes. 6
Data sheet
PRO DCDC 480W 24V 20A Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 26
D-32758 Detmold
Germany
www.weidmueller.com
Accessories
Crosshead screwdriver, Pozidrive
VDE insulated screwdriver sets, for working on live
parts up to 1000 V AC and 1500 V DC, DIN EN 60900.
IEC 900. Each piece is "GS" safety tested. Blade made
from fully hardened, high-alloy chromium-vanadium-
molybdenum steel, gun-metal finish.
General ordering data
Type SDIK PZ1 SL Version
Order No. 1274730000 Screwdriver, Screwdriver
GTIN (EAN) 4050118073225
Qty. 1 pc(s).
W-Series
Weidmüller's range of products includes end brackets
that guarantee a permanent, reliable mounting on the
terminal rail and prevent sliding. Versions with and
without screws are available. The end brackets include
marking options, also for group markers, and also a test
plug holder.
General ordering data
Type WEW 35/2 V0 GF SW Version
Order No. 1479000000 End bracket, black, TS 35, V-0, Wemid, Width: 8 mm, 130 °C
GTIN (EAN) 4050118286779
Qty. 50 pc(s).
Type WEW 35/1 V0 GF SW Version
Order No. 1478990000 End bracket, black, TS 35, V-0, Wemid, Width: 12 mm, 130 °C
GTIN (EAN) 4050118286892
Qty. 50 pc(s).
Creation date September 29, 2024 9:33:27 PM CEST
Catalogue status 14.09.2024 / We reserve the right to make technical changes. 7
Data sheet
PRO DCDC 480W 24V 20A Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 26
D-32758 Detmold
Germany
www.weidmueller.com
Accessories
Slotted screwdriver
VDE insulated screwdriver sets, for working on live
parts up to 1000 V AC and 1500 V DC, DIN EN 60900.
IEC 900. Each piece is "GS" safety tested. Blade made
from fully hardened, high-alloy chromium-vanadium-
molybdenum steel, gun-metal finish.
General ordering data
Type SDIS SL 1.0X5.5X125 Version
Order No. 1274680000 Screwdriver, Mounting tool
GTIN (EAN) 4050118073263
Qty. 1 pc(s).
Creation date September 29, 2024 9:33:27 PM CEST
Catalogue status 14.09.2024 / We reserve the right to make technical changes. 8
