BLY2-IOV2L

BYD Microelectronics Co., Ltd.

Current Sensors
Description
For the electronic measurement of currents : DC, AC, pulsed, mixed, with a galvanic
isolation between the primary circuit and the secondary circuit.

Features
‹ Hall effect measuring principle
‹ Galvanic isolation between primary
and secondary circuit
‹ Compact design for PCB mounting
‹ Low power consumption
‹ Extended measuring range (3 *IPN)
‹ Insulated plastic case recognized
according to UL 94-V0 IPN = 50…600A
Advantages VOUT = ± 4 V
‹ Easy installation
‹ Excellent accuracy Industrial applications
‹ No insertion losses
‹ Excellent performance and price ‹ AC variable speed drives
‹ Only one design for wide current ‹ Battery supplied applications
ratings range ‹ Uninterruptible Power Supplies (UPS)
‹ High immunity against external ‹ Power supplies for welding applications
Interference ‹ Static converters for DC motor drives
‹ Switched-Mode Power Supplies (SMPS)

TYPES OF PRODUCTS
Primary nominal current Primary current measuring
Type
r. m. s IPN (A) range IPM (A)
BLY2 -50IOV2L 50 ±150
BLY2 -75IOV2L 75 ±225
BLY2-100IOV2L 100 ±300
BLY2-150IOV2L 150 ±450
BLY2-200IOV2L 200 ±600
BLY2-300IOV2L 300 ±900
BLY2-400IOV2L 400 ±900
BLY2-500IOV2L 500 ±900
BLY2-600IOV2L 600 ±900

Datasheet TS-CUS-PD-0022 Rev. A/1 Page 1 of 4

 BYD Microelectronics Co., Ltd. BLY2-IOV2L
Current Sensors
Parameters Table
PARAMETERS SYMBOL UNIT VALUE CONDITIONS

Electrical data
Supply voltage(±5%)(1) VC V ±15
Current consumption IC mA ±15
Output voltage(Analog) VOUT mV ±4V±40 @ ± IPN, RL = 10 kΩ, TA = 25°C
Overload capability(1ms) IPC At 50* IPN
Isolation resistance RIS MΩ >1000 @ 500 VDC
Output internal resistance ROUT Ω 100 approx
(2)
Load resistance RL KΩ >10
R. m. s voltage for AC isolation test Vd KV 3 @50Hz, 1 min
R. m. s rated voltage、safe separation Vb V 500

Accuracy - Dynamic performance data

Linearity(3) (0…±IPN) εL %of IPN <±1
@ IPN, TA = 25°C
Accuracy X % <±1
(without offset)
Electrical offset voltage VOE mV <±20 @TA = 25°C
@ IP= 0;
Hysteresis offset voltage VOH mV <±20
after an excursion of 1* IPN
<±2 @BLY2 50--75IOV2L
Temperature coefficient of VOE TCVOE mV/K
<±1 @BLY2 100--600IOV2L
Temperature coefficient of VOUT TCVOUT %/K <±0.1 @% of reading
Response time tr µS <3 @ 90% of IPN step
di/dt accurately followed di/dt A/µS >50
Frequency bandwidth (4) BW kHz DC~50 @-3dB

General data
Ambient operating temperature TA ℃ -20….+85
Ambient storage temperature TS ℃ -40….+105
Mass m g approx 60

Notes:
（1）Operating at ±12V ≤VC<±15V will reduce the measuring range.
（2）If the customer uses 1 KΩ of the load resistor, the primary current has to be limited as
the nominal. To measure the full defined measuring range, the load resistor should be at
minimum 10 KΩ.
（3）Linearity data exclude the electrical offset.
（4）Please refer to derating curves in the technical file to avoid excessive core heating at
high frequency.

Datasheet TS-CUS-PD-0022 Rev. A/1 Page 2 of 4

 BYD Microelectronics Co., Ltd. BLY2-IOV2L
Current Sensors
Dimensions BLY2-IOV2L (in mm. 1 mm = 0.0394 inch)

16
9.8
10.5 4.8

20
30
Φ4.5 R5.2

20
I

2.5

L 40

Pins Arrangement

Red：+15V
White：-15V
30

20.5×10.5 Green：Output
Black：Ground
Wire Length:
L = 500±15MM
3

Φ2.5

◆Instructions of use
1. When the test current passes through the sensors you can get the size of the output voltage.
(Warning: wrong connection may lead to sensors damage.)
2. Based on user needs, the sensors output range can be appropriately regulated.
3. According to user needs, different rated input currents and output voltages of the sensors can
be customized.

Datasheet TS-CUS-PD-0022 Rev. A/1 Page 3 of 4

 BYD Microelectronics Co., Ltd. BLY2-IOV2L
Current Sensors
RESTRICTIONS ON PRODUCT USE
„ The information contained herein is subject to change without notice.

„ BYD Microelectronics Co., Ltd. (short for BME) exerts the greatest possible effort to ensure high quality and
reliability. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent
electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing
BME products, to comply with the standards of safety in making a safe design for the entire system,
including redundancy, fire-prevention measures, and malfunction prevention, to prevent any accidents, fires,
or community damage that may ensue. In developing your designs, please ensure that BME products are used
within specified operating ranges as set forth in the most recent BME products specifications.

„ The BME products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic
appliances, etc.). These BME products are neither intended nor warranted for usage in equipment that
requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of
human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control
instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments,
combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of
BME products listed in this document shall be made at the customer’s own risk.

Datasheet TS-CUS-PD-0022 Rev. A/1 Page 4 of 4