Pro d u c t

Ca talo gu e

0090 533 345 79 48 www.boardandwall.com [email protected]

 Gy ps u m B o a rd
F i b e rce m e nt B o a rd
 www.boardandwall.com

Lightweight Gypsum Board

THICKNESS WIDTH LENGTH WEIGHT / M2 PACKAGE

12.5 mm 1200 mm 2000 - 3600 mm 6.80 kg 70 Sheets /Pallet

Regular Gypsum Board

THICKNESS WIDTH LENGTH WEIGHT / M2 PACKAGE

9.5 mm 1200 mm 2000 - 3600 mm 6.80 kg 70 Sheets /Pallet
12.5 mm 1200 mm 2000 - 3600 mm 8.00 kg 60 Sheets /Pallet
15 mm 1200 mm 2000 - 3600 mm 11.50 kg 50 Sheets /Pallet

Moisture Resistant Gypsum Board

THICKNESS WIDTH LENGTH WEIGHT / M2 PACKAGE

12.5 mm 1200 mm 2000 - 3600 mm 8.00 kg 60 Sheets /Pallet
15 mm 1200 mm 2000 - 3600 mm 11.50 kg 50 Sheets /Pallet

Fire Resistant Gypsum Board

THICKNESS WIDTH LENGTH WEIGHT / M2 PACKAGE

12.5 mm 1200 mm 2000 - 3600 mm 10.50 kg 60 Sheets /Pallet
15 mm 1200 mm 2000 - 3600 mm 13.50 kg 50 Sheets /Pallet

Exterior Gypsum Board

THICKNESS WIDTH LENGTH WEIGHT / M2 PACKAGE

12.5 mm 1200 mm 2000 - 3600 mm 11 kg 60 Sheets /Pallet
15 mm 1200 mm 2000 - 3600 mm 13.50 kg 50 Sheets /Pallet

Fibercement Board

THICKNESS WIDTH LENGTH WEIGHT / M2 PACKAGE

8-20 mm 1200 - 1250 mm 2000 - 3000 mm 12-30 kg 40 Sheets /Pallet

0090 533 345 79 48 [email protected]

 PRODUCT FEATURES

Submittal Sheet
PRODUCT FEATURES

STORAGE

RECOMMENDED

RECOMMENDED
PRODUCT INFORMAT

APPLICATION

APPLICATION

LIMITATIONS

MIXING

MIXING

USGBoral.com P

Jo i nt Co m poun
USGBoral.comd
PRECAUTIONARY
USG Boral All Purpose Joint Compound
STATEMENT
Version#:1 Revision Date:
Pl

USG Boral All Purpose Joint Compound

Version#:1 Revision Date:
 JOINT
USG COMPOUND
BORAL JOINT
ALL COMPOUND
PURPOSE
JOINT COMPOUND www.boardandwall.com

USG BORAL ALL PURPOSE JOINT COMPOUND USG BORAL is anALL

air-drying,
PURPOSE JOINT COMPOUND is an air-drying,
USG BORAL ALL PURPOSE JOINT COMPOUND
compound suitable for all three coat applications
compound
plasterboard joints, angles and fastener heads.
or assuitable
Complies
plasterboard
a finishing coat
for all
with ASTM
joints,
for coat
three
anglesC475.
all applications or as a finishing coat for all
and fastener heads. Complies with ASTM C475.
USG BORAL ALL PURPOSE JOINT COMPOUND is an air-drying,
compound suitable for all three coat applications
USG BORAL
• Premiumor ALL
asgrade,
a PURPOSE
finishing coat foror
JOINT
all purpose all
COMPOUND is an air-drying,
• Premium compound
grade, all purpose or
PRODUCT FEATURES
plasterboard joints, angles and fastener heads. Complies with ASTM C475.
finishing compound. finishing compound.
suitable for all three coat applications or as a finishing coat for all plas-
terboard
• Used joints, angles
for all three andor
coats fastener
as a heads. Complies
• Used with ASTM
for all three C475.
coats or as a
skimming
• Premium coat.all purpose or
grade, skimming coat.Submittal Sheet
finishing compound.
• USG Boral All Purpose Joint Compound • Excellent
may appear workability,
thick easy • Excellent workability, easy
PRODUCT
in pail. Before adding water, lightly•mix
Used forFEATURES
application
& test by hand
allapplication;
its three coatsorrequired,
if with
or as a add application by hand or with
mechanical tools. PRODUCT FEATURES
mechanical tools.
water to achieve desired consistency. skimming coat.
• Premium
Minimalgrade, all purpose
easyofor • Minimal mixing & cleaning of tools.
causefinishing compound.
• •Excellent workability,
mixing & cleaning tools.
• Caution: Avoid over-thinning when adding water
application byashand
this may
or with
• Used for
cracking and excessive shrinkage. •mechanical all three
Can be sanded coats or as
tools.by hand or with a skimming coat.
• Can be sanded by hand or with
mechanical sanding tools. mechanical sanding tools.
• • Excellent stir
If liquid has separated from the compound, workability,
carefully easy
to application by hand or with mechanical tools.
restore
• Minimal mixing & cleaning of tools.
consistency. • • Excellent
Minimal mixing surface
& for
cleaningpainting.
of tools. • Excellent surface for painting.
• Can be sanded by hand or with
• • Can
Caution: Do not over mix; over mixing be
cansanded
mechanical
introduce byair
sandinghand
tools.or with
bubbles, mechanical sanding tools.
which
can create surface imperfections. • Excellent surface for painting.
• Excellent surface for painting. Hand and Hand and
Mechanical Tool Mechanical Tool
• USG Boral All Purpose Joint Compound should be stored under a
cover in a dry environment and protected from temperature extremes;
Hand and
storage in an unsuitable environment can shorten Skimming the lifespan of this
Mechanical Tool
Skimming

product. STORAGE
• RECOMMENDED
USG Boral All Purpose Joint Compound • is
USG Boralfor
suitable All Purpose Joint Compound is suitable for
• use
USGasBoral
all three coats in Purpose
All General the USG Joint use coat
BoralCompound
three as alljointing
three
has coats in of
system.
a shelf life the12USG Boral three coat jointing system.
Skimming
PRODUCT
months INFORMATION
from date of manufacture. • is
USG BoralforAll the
Purpose
• USG Boral All Purpose Joint Compound suitable final Joint Compound is suitable for the final
• USG Boral
coating All Purpose Joint
ofplasterboard Compound
joints, iscoating
angles and suitable
fastener ofplasterboard
for
heads when used joints,
in angles and fastener heads when used in
N use as all three
conjunction coats
with USGin Boral
the USG Boral
setting conjunction
three
type coat
joint with
jointing
compounds USG
system. Boral
for first andsetting type joint compounds for first and
second coats. second coats.
• USG Boral All Purpose Joint Compound is suitable for the final
RECOMMENDED
coating ofplasterboard joints, angles and fastener heads when used in
APPLICATION • Surfaces must be clean and free from dust. PRODUCT INFORMAT
• conjunction
Surfaces must withbe clean
USG andsetting
Boral free from typedust.
joint compounds for first and
• second
USG Boralcoats.
All Purpose Joint Compound • may
USG be Boral All Purpose
diluted to a Joint Compound may be diluted to a
workable viscosity by adding water 25kg followed workable viscosity by
by mechanical adding
mixing if water followed by mechanical mixing if
• Surfaces
desired.
VOC contentmust be clean and free<50g/L from dust. desired.
•• USG
Can Boral &All
be applied
Tapping Purpose Joint
byCoverage
Filling hand Compound•tools.
or mechanical Canbe
may bediluted
applied toby a hand or mechanical tools.
50m2
workable viscosity by adding water followed by mechanical mixing if
• desired.
When using USG Boral All Purpose Joint • When
Compound using for
USG allBoral
threeAll Purpose Joint Compound for APPLICATION
all three
coats, the first coat must be used to bed coats,
a the first coat
high-quality paper must
tape.be used to bed a high-quality paper tape.
• The application of USG Boral All
• Can be applied by hand or mechanical tools. Purpose Joint Compound at
• USG interior
Boraltemperatures lessCompound
All Purpose Joint than 10°C is • not
USG
must Boral All Purpose
recommended.
be allowed Joint Compound must be allowed to dry thoroughly
to dry thoroughly
• APPLICATION
When tousing
Under
(up 24cold USG
hours Boral
ordepending
wet All Purpose
weather
on conditions,
temperature (up
Joint Compound
allow tomore
24 hours
& humidity) for
than depending
all
before24 three on temperature
hours for
re-coating or LIMITATIONS
& humidity) before re-coating or
coats, the first
sanding.
thorough coat must be used to bed asanding.
drying. high-quality paper tape.
•• •USG
Surfaces
Boral must
All be
Purpose clean
Joint and free from
Compound must dust.
• Only apply
be allowed over
to drysetting type compounds that have been allowed to dry
thoroughly
• Only
When apply over
diluting setting
USG type
Boral Allcompounds
Purpose that
Joint have been
Compound doallowed
not to dry
(up to 24 hours depending on temperature &thoroughly.
thoroughly. humidity) before re-coating or
•sanding.
USG Boral over
vigorously All Purpose Joint
mix as this will Compound may beairdiluted
introduce entrapped which to a workable viscosity by adding water
can result
• followed
Sand with in surface
bycare
mechanical imperfections.
using 180 mixing • Sand with care using 180 or 220 grit paper.
if desired.
or 220 grit paper.
• Only apply over setting type compounds that have been allowed to dry
• •thoroughly.
Can be applied
Thoroughly
Do not applyclean
USGby hand
allBoral orPurpose
toolsAll
and mechanical
equipment • Thoroughly
Joint tools.
after use. clean
Compound overalljoints
tools and equipment after use.
that are not thoroughly dry; pinholesJoint may Compound
result.
• •SandWhen with using
careUSG using Boral
180 orAll Purpose
220 grit paper. for all three coats, the first coat must be used to
• MIXING
Always use clean tools. • Always use clean tools.
• bed Doanot
•Thoroughlyhigh-quality
useclean all paper
sandpaper tape.
toolslower
and than 150 grit.
equipment Take
after
•used
Do not
care to avoid scratching
use.
mix with residues of previously used compounds.
• • Do when
USG not mix with
sanding.
Boral All residuesJoint
Purpose of previously
Compound compounds.
must be allowed to dry thoroughly (up to 24 hours depending
•• on The inclusion ofof&such materials will • The theinclusion of such materials will impair the performance of this
•Always
The use clean
temperature
inclusion tools.
humidity)
other before
materials toimpair
are-coating
mixproduct
will performance
or
impairand sanding.
the of this
willperformance
void the product warranty.
product
(e.g. and
reduced will void
strength the
andproduct warranty.
poorcompounds
adhesion)
• •Do Onlynotapply
mix with over residues
setting oftype
previously usedand void
compounds.
that the product
have warranty.
been allowed to dry thoroughly.
erboard • •The • USGBoral.com
Consume
Sand with care
inclusion
Ceilings an opened
using
ofInterior
such pail
180 within
or 220
Plasterboard
materials
Finishes 48
will impairhours.
grit paper.
Metal Ceilings
the performance
Framing Interior
of this
Substrates Finishes Metal Framing MIXING
Substrates
product and will void the product warranty.
••USG
Thoroughly
Dust from
Boral All
clean
this
Purpose
all
Jointproduct
tools and equipment after use.
Compound contains silica. Prolonged inhalation may be 1/2
1/2
Version#:1 Revision Date: Issue Date: 31-May-2020 Doc. Ref. IF-TDS0021-1-TR
sue Date: 31-May-2020harmful toIF-TDS0021-1-TR
health.
rboard Ceilings
Doc. Ref.
Interior Finishes Metal Framing Substrates PRECAUTIONARY
• Ensure adequate ventilation. Wear eye protection and an approved STATEMENT
1/2
e Date: 31-May-2020 disposable respirator which conforms to AS1716: 2012 Type P1 or P2.
Doc. Ref. IF-TDS0021-1-TR
USGBoral.com P
• If dust or paste causes irritation use impervious PVC, nitrile or rubber
gloves. Wash exposed skin after handling. If product gets into the eyes, USG Boral All Purpose Joint Compound
Version#:1 Revision Date:
wash thoroughly with clean water.
• Do not ingest contents of package. If ingested, seek medical advice
immediately.
• Keep contents out
0090 533 345 of reach of children.
79 48 [email protected]
 USG BORAL ALL PURPOSE
JOINT
USG BORAL ALL COMPOUND
PURPOSE
Submittal Sheet
www.boardandwall.com

JOINT COMPOUND
USG BORAL SHEETROCK® ALL PURPOSE
USG BORAL ALL PURPOSE JOINT COMPOUND is an air-drying,
JOINT COMPOUND compound suitable for all three coat applications or as a finishing coat for all
plasterboard joints, angles and fastener heads. Complies with ASTM C475.
USG BORAL ALL PURPOSE JOINT COMPOUND USG Boral SHEETROCK®
is an air-drying,ALL PURPOSE joint compound is an air-drying,
compound
compound suitable for all three coat applications orsuitable for all
as a finishing three
coat coat applications
for all or as aall
• Premium grade,
finishing coat
purpose or
PRODUCT FEATURES
plasterboard joints, angles and fastenerfor MIXING
all plasterboard
heads. Complies withjoints,
ASTM angles
C475. and fastener heads.
finishing Complies
compound. with
ASTM C475. PRODUCT FEATURES
• Used for all three coats or as a
• Premium grade, all purpose or skimming coat.
finishingFEATURES
PRODUCT compound.
• Excellent workability, easy
• All Purpose Premix may appear thick in pail.
• Used forBefore adding
all three coatswater,
or as lightly
a application by hand or with
mix & test its application; if required, add skimming
• Premium coat. all
water tograde,
achieve desired consistency.
purpose mechanical tools.
or finishing compound.
• Caution: Avoid over-thinning when •adding
Excellent
• Used all workability,
forwater three coats
as this mayeasy
or • Minimal
as a skimming
cause coat. mixing & cleaning of tools.
application by hand or with
cracking and excessive shrinkage. • Excellent workability,
mechanical tools. easy application by• Can
handbeor
sanded by hand or with
with mechanical tools.
mechanical sanding tools.
• Minimal
• Minimalmixing
• If liquid has separated from the compound,
mixing &
stir cleaningofof
carefully to restore
& cleaning tools.
tools.
consistency. • Excellent surface for painting.
• Can be sanded by hand or
• Can be sanded by hand or with
with mechanical sanding tools.
• Caution: Do not over mix; over mixing can introduce
• Excellent surface
mechanical air bubbles,
for painting.
sanding tools. which
can create surface imperfections.
• Excellent surface for painting. Hand and
Mechanical Tool
• USG Boral SHEETROCK® All Purpose Joint Compound should be stored STORAGE
under a cover in a dry environment and protected from temperature
Hand and
extremes; storage in an unsuitable environment can shorten the lifespan of
Mechanical Tool
Skimming
this product.
RECOMMENDED • USG Boral All Purpose Joint Compound is suitable for
• PRODUCT INFORMATION
USG Boral SHEETROCK® All Purpose Joint use as all threehas
Compound coats in the
a shelf lifeUSG
of Boral three coat jointing system.
Skimming RECOMMENDED
12 months from date of manufacture. • USG Boral All Purpose Joint Compound is suitable for the final
• USG Boral All Purpose Joint Compound iscoating suitableofplasterboard
for joints, angles and fastener heads when used in
N use as all three coats in the USG Boral three conjunction with
coat jointing
PRODUCT INFORMATIO
USG Boral setting type joint compounds for first and
system.
second coats.
• USG Boral All Purpose Joint Compound is suitable for the final
coating ofplasterboard joints, angles and fastener heads when used in
APPLICATION
conjunction
• Surfaces must be clean and free from dust.
with USG Boral setting type joint compounds for first and
second coats. Net 5 kg,• 15USG Boral
Kg and 28All
kgPurpose Joint
re-sealable Compound may be diluted
pail APPLICATION
to a
workable viscosity by adding water followed by mechanical mixing if
VOC content
• Surfaces must be clean and free<50g/L
from dust. desired.
Tapping
• USG Boral&All Filling Coverage
Purpose 56m2
Joint Compound •may
Canbebediluted
applied toby
a hand or mechanical tools.
workable viscosity by adding water followed by mechanical mixing if
• When using USG Boral All Purpose Joint Compound for all three
•desired.
The application of USG Boral SHEETROCK® All Purpose Joint Compound
coats, the first coat must be used to bed a high-quality LIMITATIONS
paper tape.
• at interior
Can temperatures
be applied by hand less than 10°C istools.
or mechanical not recommended. Under cold or
wet weather conditions, allow more than• 24
APPLICATION USG Boral
hours forAll Purpose drying.
thorough Joint Compound must be allowed to dry thoroughly
• When using USG Boral All Purpose Joint Compound (up to 24 hours depending
for all three on temperature & humidity) before re-coating or
•coats,
Whenthe diluting USGmust
first coat Boralbe
SHEETROCK®
used to bed All Purpose Joint
asanding.
high-quality Compound
paper tape.
doSurfaces
not vigorously over mix as this willfrom
introduce entrapped air which can
• •USG Boral Allmust be
Purposeclean and free
Joint Compound must dust.
• Only apply over
be allowed to drysetting type compounds that have been allowed to dry
thoroughly
result in surface imperfections.
• USG Boral SHEETROCK® All Purpose may be diluted to a workable viscosity by adding water followed
(up to 24 hours depending on temperature &thoroughly.
humidity) before re-coating or
sanding.
•byDo not apply USG BoralifSHEETROCK®
mechanical mixing desired. •AllSand
Purpose
with Joint Compound
care using 180 orover
220 grit paper.
• joints
Only that are
apply notsetting
over thoroughly
type dry; pinholesthat
compounds mayhave
result.
been allowed to dry
• Can be applied by hand or mechanical • tools.
Thoroughly clean all tools and equipment after use.
thoroughly.
•• Do not use sandpaper lower than 150 grit. Take care to avoid scratching
When using USG Boral SHEETROCK® All Purpose for all three coats, the first coat must be used to bed
• Sand sanding.
when with care using 180 or 220 grit paper.
aMIXING
high-quality paper tape. • Always use clean tools.
• Thoroughly
•• The clean all tools and equipment after use. MIXING
USGinclusion of other materials
Boral SHEETROCK® to a mix
All Purpose • will
Do impair
not
compound mixthe performance
with
must residues of (e.g.
be allowed previously
to dry used compounds.
thoroughly (up to 24 hours
reduced strength and poor adhesion) and void the product warranty.
• depending on temperature
Always use clean tools. • The inclusion of such materials
& humidity) before re- coating or sanding. will impair the performance of this
•• Consume an opened pail within 48 hours.product and will void the product warranty.
• DoOnly
notapply over
mix with settingoftype
residues compounds
previously that have been allowed to dry thoroughly.
used compounds.
• ••The
Sand
Dust
with care
USGBoral.com
inclusion using
ofproduct
from this such 180 or 220
Plasterboard
materials
contains will grit paper.
impair
silica. Ceilings
the performance
Prolonged Interior
ofmay
inhalation Finishes
this be Metal Framing Substrates
• Thoroughly
product
harmful and clean all tools and equipment after use.
will
to health. void the product warranty.
USGBoral.com P
USG Boral All Purpose Joint Compound 1/2
Version#:1 Revision Date: Issue Date: 31-May-2020 Doc. Ref. IF-TDS0021-1-TR
• Ensure adequate ventilation. Wear eye protection and an approved
erboard Ceilings Interior Finishes Metal Framing Substrates USG Boral All Purpose Joint Compound
disposable respirator which conforms to AS1716: 2012 Type P1 or P2. Version#:1 Revision Date:

1/2
• If dust
ue Date: 31-May-2020 Doc.or
Ref.paste causes irritation use impervious PVC, nitrile or rubber
IF-TDS0021-1-TR
gloves. Wash exposed skin after handling. If product gets into the eyes,
wash thoroughly with clean water.
USGBoral.com P
• Do not ingest contents of package. If ingested, seek medical advice
immediately. USG Boral Sheetrock® Lightweight All-Purp
0090 533 345 79 48 [email protected]
Version#:2 Revision Date:- 1-Oct-2018

• Keep contents out of reach of children.

 USG BORAL ALL PURPOSE
JOINT
USG BORAL ALL COMPOUND
PURPOSE
www.boardandwall.com
JOINT COMPOUND
Low shrinkage for faster, finer finishing Factory-controlled low-shrinkage
formulation allows finer finished work and USG
usually requires
BORAL ALL only two coats
PURPOSE JOINT COMPOUND is an air-drying,
USG BORAL SHEETROCK® LIGHTWEIGHT
over metal bead and fasteners, saving timecompound
and money.
plasterboard
suitable for all three coat applications or as a finishing coat for all
joints, angles and fastener heads. Complies with ASTM C475.
Minimized cratering Special vacuum processing and patented formulation
ALL-PURPOSE JOINT COMPOUND
USG BORAL ALL PURPOSE JOINT COMPOUND is an air-drying,
technology eliminate entrained air to minimize cratering and minor surface
compound suitable for all three coat applications or as a finishing coat for all
imperfections. • Premium grade, all purpose or
PRODUCT FEATURES
plasterboard joints, angles and fastener heads. Complies with ASTM C475. finishing compound.
USG Boral SHEETROCK® lightweight all-purpose joint compound is more
• Always use clean tools. flexible and easier than other joint compounds forallembedding
• Used for three coats joint
or as tape
a
and for
• Premiumfilling
• Do not mix with residues of previously used compounds. and
grade, finishing
all purposegypsum
or panel joints,
skimming corner
coat. bead, trim and
finishing Also
fasteners. compound.
for hand-applying simple• textures.
Excellent Complies
workability,with
easyASTM
• The inclusion of such materials will impair
C475. the performance of this
• Used for all three coats or as a application by hand or with
product and will void the product warranty.
skimming coat. mechanical tools.
PRODUCT FEATURES
• SHEETROCK® Brand Lightweight All Purpose Joint Compound may
• Excellent workability, easy • Minimal mixing & cleaning of tools.
appear thick in pail. Before adding water, application
lightly mix &by hand
test or with
its application; if
• Can be sanded by hand or with
Formechanical
professional
required, add water to achieve desired consistency. tools.
drywall finishing mechanical sanding tools.
• •High
• Caution: Avoid over-thinning when adding performance
Minimal
water mixing compound.
& cleaning
as this may of tools.• Minimizes cratering.
cause • Excellent surface for painting.
cracking and excessive shrinkage. • •Excellent workability
Can be sanded by hand (including
or with better slip and pull).
mechanical
• Low shrinkage,sanding
easy tools.
sanding. • Better filling
• If liquid has separated from the compound, stir carefully to restore
consistency. • Excellent surface for painting. Hand and
Mechanical Tool
• Caution: Do not over mix; over mixing can introduce air bubbles, which
can create surface imperfections.
Hand and
• USG Boral SHEETROCK® Lightweight should be stored under aMechanical cover inTool
a Skimming

dry environment and protected from temperature extremes; storage in an

RECOMMENDED • USG Boral All Purpose Joint Compound is suitable for
unsuitable environment can shorten the lifespan of this product.
use as all three coats in the USG Boral three coat jointing system.
Skimming
• USG Boral SHEETROCK® Lightweight has• a USG shelfBoral
life ofAll
12 Purpose
months from Joint Compound is suitable for the final
PRODUCT
date INFORMATION
of manufacture.
• USG Boral All Purpose Joint Compound iscoating suitableofplasterboard
for joints, angles and fastener heads when used in
use as all three coats in the USG Boral three conjunction
coat jointing with USG Boral setting type joint compounds for first and
system.
second coats.
• USG Boral All Purpose Joint Compound is suitable for the final
coating ofplasterboard joints, angles and fastener heads when used in
APPLICATION
Drying Time with USG Boral setting
conjunction 12-24
type
• Surfaces
hours
joint(depending
must be clean
compoundson forlocal
and free from dust.
first and
second coats. conditions)
• USG Boral All Purpose Joint Compound may be diluted to a
workable viscosity
17 Liters re-sealable pail by adding water followed by mechanical mixing if
• Surfaces must be clean and free from dust. desired.
VOC content <30g/L
• USG Boral All Purpose Joint Compound•may Canbe bediluted
applied tobya hand or mechanical tools.
Skimming Coverage
workable viscosity by adding water 33m2 (basedby
followed onmechanical
1mm thickness) mixing if
desired. • When using USG Boral All Purpose Joint Compound for all three
coats, the first coat must be used to bed a high-quality paper tape.
• Can be applied by hand or mechanical tools.
• The application of USG Boral SHEETROCK® • USG Boral All at
Lightweight Purpose
interior Joint Compound must be allowed to dry thoroughly
• When using USG Boral All Purpose Joint Compound (up to 24 hours depending
for all three on temperature & humidity) before re-coating or
temperatures less than 10°C is not recommended. Under cold or wet
coats, the first coat must be used to bed asanding. high-quality paper tape.
ADVANTAGES
weather conditions, allow more than 24 hours for thorough drying.
• USG Boral All Purpose Joint Compound must • Only apply over
be allowed to drysetting type compounds that have been allowed to dry
thoroughly
• When
(up todiluting
24 hoursUSG Boral SHEETROCK®
depending on temperature Lightweight
humidity)do
&thoroughly. not vigorously
before re-coating or
USG
over SHEETROCK
mix as this willBrand
sanding. introducequality In addition
entrapped to the
air which cancost-saving
result in surface benefits described above, this vinyl-ba-
• Sand with care using 180 or 220 grit paper.
sed compound
imperfections. offers all the advantages of high-quality
• Only apply over setting type compounds that have been allowed to dry
SHEETROCK Brand Ready-Mixed Joint Com-
pound.
thoroughly. • Thoroughly clean all tools and equipment after use.
• Do not apply USG Boral SHEETROCK® Lightweight over joints that are
not thoroughly
Faster mixing dry;
time pinholes
When may result.
180 additional water is necessary,
• Sand
MIXINGwith care using or 220 grit paper.
• Always use clean SHEETROCK
tools. Brand Lightweight All Purpose
Joint
••Do Compound
not
Thoroughly accepts
use sandpaper
clean all toolswater
lower than
and 150 grit.• Take
equipment after care
use. to with
avoidresidues
scratching
Do not mix of previously used compounds.
when quickly
more sanding.to reduce solution time and mixes with less effort than conventional compounds.
• The inclusion of such materials will impair the performance of this
••The
Always
Better slip,use
inclusion clean
excellenttools.
of other bond Provides
materials to a mixsuperior
willproduct
impairease the
andofperformance
handling,
will void thegood(e.g.
productcrack resistance and excellent
warranty.
reduced
• Do notstrength
adhesion. mix
More withand poor
timeadhesion)
residues
open of and
previously
Facilitates void compounds.
used
working theback,
product evenwarranty.
in fast-drying conditions, by providing more
USGBoral.com
••Consume
The
wet-edge inclusion
life toofprevent
an opened such pail Plasterboard
materials
rolling
within will
and
48 impair
tearing
hours. Ceilings
the performance
of previously Interior
of
laid Finishes
compound; Metal
this Framing
also eliminates Substrates
nuisance of
product and will void the product warranty.
crusted compound flaking
USG Boral All Purpose Joint Compound from open container walls. 1/2
Version#:1 Revision Date: Issue Date: 31-May-2020 Doc. Ref. IF-TDS0021-1-TR
erboard Low shrinkage for
Ceilings faster,
Interior finer finishing
Finishes Factory-controlled
Metal Framing low-shrinkage formulation allows finer finis-
Substrates
hed work and usually requires only two coats over metal bead and fasteners, saving time and money.
1/2
Minimized
ue Date: 31-May-2020 cratering
Doc. Ref. Special vacuum processing and patented formulation technology eliminate
IF-TDS0021-1-TR

entrained air to minimize cratering and minor surface imperfections.

erboard Ceilings Interior Finishes Metal Framing Substrates

int Compound 2/3

Issue Date 1-July-2018 0090 533
Doc. Ref. 345 79 48
IF-TDS003-2 [email protected]
Metal Prof i l es a n d Accesso ri es
 www.boardandwall.com

Ceiling C

A B C
60 mm 27 mm 6 mm

47 mm 18 mm 6 mm
c

a
c
Standard Quality Thickness
EN10346 DX51D 0,40; 0,50; 0,60mm
b EN10143

Zinc Coating Fire Resistance

Minimum 100GR/M2 A1 NONCOMBUSTIBLE
a

Ceiling U

A B
28 mm 22 mm

28 mm 24 mm

28 mm 27 mm

Standard Quality Thickness

EN10346 DX51D 0,40; 0,50; 0,60mm
b EN10143

Zinc Coating Fire Resistance

Minimum 100GR/M2 A1 NONCOMBUSTIBLE
a

0090 533 345 79 48 [email protected]

 www.boardandwall.com

Omega

A B C
68 mm 22 mm 35 mm

83 mm 22 mm 50 mm

c Standard Quality Thickness

EN10346 DX51D 0,40; 0,50; 0,60mm
EN10143
b
Zinc Coating Fire Resistance
Minimum 100GR/M2 A1 NONCOMBUSTIBLE

Omega U

A B
25 mm 11 mm

38 mm 11 mm

Standard Quality Thickness

EN10346 DX51D 0,40; 0,50; 0,60mm
b EN10143

Zinc Coating Fire Resistance

Minimum 100GR/M2 A1 NONCOMBUSTIBLE

0090 533 345 79 48 [email protected]

 www.boardandwall.com

Track Wall U

A B A B
48 mm 28 mm 90 mm 38 mm

50 mm 30 mm 90 mm 40 mm

50 mm 38 mm 90 mm 55 mm

50 mm 40 mm 100 mm 28 mm

50 mm 55 mm 100 mm 38 mm

68 mm 40 mm 100 mm 40 mm

68 mm 55 mm 100 mm 55 mm

70 mm 28 mm 120 mm 40 mm

b 70 mm 40 mm 125 mm 32 mm

70 mm 55 mm 125 mm 40 mm

75 mm 30 mm 125 mm 55 mm
a
75 mm 38 mm 150 mm 32 mm

90 mm 28 mm 150 mm 40 mm

90 mm 38 mm 150 mm 55 mm

Standard Quality Thickness

EN10346 DX51D 0,40; 0,50; 0,60mm
EN10143

Zinc Coating Fire Resistance

Minimum 100GR/M2 A1 NONCOMBUSTIBLE

0090 533 345 79 48 [email protected]

 www.boardandwall.com

Stud Wall C

A B C
48 mm 36 mm 6 mm

49 mm 35 mm 6 mm

49 mm 42 mm 6 mm

49 mm 47 mm 6 mm

68 mm 42 mm 6 mm

70 mm 34 mm 6 mm
c
70 mm 36 mm 6 mm
b 70 mm 42 mm 6 mm

74 mm 35 mm 6 mm

a 74 mm 42 mm 6 mm
74 mm 47 mm 6 mm

99 mm 35 mm 6 mm
99 mm 42 mm 6 mm
99 mm 47 mm 6 mm
120 mm 42 mm 6 mm

125 mm 49 mm 6 mm

149 mm 42 mm 6 mm
149 mm 49 mm 6 mm

Standard Quality Thickness

EN10346 DX51D 0,40; 0,50; 0,60mm
EN10143

Zinc Coating Fire Resistance

Minimum 100GR/M2 A1 NONCOMBUSTIBLE

0090 533 345 79 48 [email protected]

 www.boardandwall.com

Corner

A B
25 mm 25 mm

30 mm 30 mm

30 mm 40 mm

30 mm 50 mm

50 mm 50 mm

Standard Quality Thickness

b EN10346 DX51D 0,40; 0,50; 0,60mm
EN10143

Zinc Coating Fire Resistance

Minimum 100GR/M2 A1 NONCOMBUSTIBLE

Perforated Corner

A B C
20 mm 20 mm 86 C

21 mm 21 mm 86 C
23 mm 23 mm 86 C

Standard Quality Thickness

EN10346 DX51D 0,30
EN10143

Zinc Coating Fire Resistance

Minimum 100GR/M2 A1 NONCOMBUSTIBLE

0090 533 345 79 48 [email protected]

 www.boardandwall.com

Heavy Bead

A B C
32 mm 32 mm 70 C
33 mm 33 mm 70 C

35 mm 35 mm 70 C

Standard Quality Thickness

EN10346 DX51D 0,30
EN10143

Zinc Coating Fire Resistance

Minimum 100GR/M2 A1 NONCOMBUSTIBLE

U Trim

A B C
24 mm 14 mm 10 mm

c
Standard Quality Thickness
EN10346 DX51D 0,35
b EN10143

Zinc Coating Fire Resistance

Minimum 100GR/M2 A1 NONCOMBUSTIBLE
a

0090 533 345 79 48 [email protected]

 www.boardandwall.com

SHARP POINT COARSE THREAD DRYWALL SCREW

DRIVE HEAD SURFACE THICKNESS SIZE PACKAGE

PHILLIPS BUGLE BLACK PHOSPHATED 3.5 - 3.9 mm 25 mm 16x1000

PHILLIPS BUGLE BLACK PHOSPHATED 3.5 - 3.9 mm 32 mm 10x1000
PHILLIPS BUGLE BLACK PHOSPHATED 3.5 - 3.9 mm 35 mm 10x1000
PHILLIPS BUGLE BLACK PHOSPHATED 3.5 - 3.9 mm 38 mm 16x500
PHILLIPS BUGLE BLACK PHOSPHATED 3.5 - 3.9 mm 42 mm 16x500
PHILLIPS BUGLE BLACK PHOSPHATED 3.5 - 3.9 mm 45 mm 16x500
PHILLIPS BUGLE BLACK PHOSPHATED 3.5 - 3.9 mm 50 mm 16x500
PHILLIPS BUGLE BLACK PHOSPHATED 3.5 - 3.9 mm 55 mm 16x500

SHARP POINT FINE THREAD DRYWALL SCREW

DRIVE HEAD SURFACE THICKNESS SIZE PACKAGE

PHILLIPS BUGLE BLACK PHOSPHATED 3.5 - 3.9 mm 25 mm 16x1000

PHILLIPS BUGLE BLACK PHOSPHATED 3.5 - 3.9 mm 32 mm 10x1000
PHILLIPS BUGLE BLACK PHOSPHATED 3.5 - 3.9 mm 35 mm 10x1000
PHILLIPS BUGLE BLACK PHOSPHATED 3.5 - 3.9 mm 38 mm 16x500
PHILLIPS BUGLE BLACK PHOSPHATED 3.5 - 3.9 mm 42 mm 16x500
PHILLIPS BUGLE BLACK PHOSPHATED 3.5 - 3.9 mm 45 mm 16x500
PHILLIPS BUGLE BLACK PHOSPHATED 3.5 - 3.9 mm 50 mm 16x500
PHILLIPS BUGLE BLACK PHOSPHATED 3.5 - 3.9 mm 55 mm 16x500

SELF-DRILL FINE THREAD DRYWALL SCREW

DRIVE HEAD SURFACE THICKNESS SIZE PACKAGE

PHILLIPS BUGLE BLACK PHOSPHATED 3.5 - 3.9 mm 25 mm 16x1000

PHILLIPS BUGLE BLACK PHOSPHATED 3.5 - 3.9 mm 32 mm 10x1000
PHILLIPS BUGLE BLACK PHOSPHATED 3.5 - 3.9 mm 35 mm 10x1000
PHILLIPS BUGLE BLACK PHOSPHATED 3.5 - 3.9 mm 38 mm 16x500
PHILLIPS BUGLE BLACK PHOSPHATED 3.5 - 3.9 mm 42 mm 16x500
PHILLIPS BUGLE BLACK PHOSPHATED 3.5 - 3.9 mm 45 mm 16x500
PHILLIPS BUGLE BLACK PHOSPHATED 3.5 - 3.9 mm 50 mm 16x500
PHILLIPS BUGLE BLACK PHOSPHATED 3.5 - 3.9 mm 55 mm 16x500

COLLATED DRYWALL SCREW

DRIVE HEAD THREAD SURFACE THICKNESS SIZE PACKAGE

PHILLIPS BUGLE FINE - COARSE BLACK PHOSPHATED 3.5 - 3.9 mm 25 mm 10x1000

PHILLIPS BUGLE FINE - COARSE BLACK PHOSPHATED 3.5 - 3.9 mm 35 mm 10x1000
PHILLIPS BUGLE FINE - COARSE BLACK PHOSPHATED 3.5 - 3.9 mm 38 mm 10x1000
PHILLIPS BUGLE FINE - COARSE BLACK PHOSPHATED 3.5 - 3.9 mm 42 mm 10x1000
PHILLIPS BUGLE FINE - COARSE BLACK PHOSPHATED 3.5 - 3.9 mm 45 mm 10x1000

0090 533 345 79 48 [email protected]

 www.boardandwall.com

Suspended Gypsum Ceiling

1 - Steel Screw
2 - Hanger Wire
3 - Hanger Spring
4 - Main Carrier 3600 mm
5 - Cross Carrier 1200 mm
6 - Cross Carrier 600 mm
7 - Corner Profile 3050 mm
8 - Gypsum Tile 600 x 600 mm

Gypsum Ceiling Tiles

THICKNESS SIZE SURFACE BACK FACE*

8 mm 600x600 mm Vinyl Aluminium
9.5 mm 600x600mm Vinyl Aluminium
8 mm 600x600 mm Painted Aluminium
9.5 mm 600x600mm Painted Aluminium

*Optional

Hanger Spring Steel Screw 6x45 Hanger Wire

0090 533 345 79 48 [email protected]

 www.boardandwall.com

Main Carrier

Cross Carriers

Corner Profile

c
a

Standard Quality Thickness

EN10346 DX51D 0,30; 0,40 mm
EN10143

Color Fire Resistance

RAL 9016 White A1 NONCOMBUSTIBLE

0090 533 345 79 48 [email protected]

 Inspection Flap

4 3
Technical Specification
5 2
1&2- Aluminium Exterior and Interior 1
6
Frame (EnAw6063)
3 - Fire Seal (Flament / Sodium Silicate)
7
4 - Latch (Sae1060)
5 - Double Layer Non-combustible A1 8

Class Gypsum Board 12.5mm

3
6 - Mineral Wool Insulation 30mm 45kg/m3
7 - Lock Set(Sae1060 6-8 um 960 680 Cr+3)
8 - Key (ZnAI4Cu)

Fire Resistance Class: F90/EI120

Standard: EN 1634 - 1:2008

0090 533 345 79 48 [email protected]

 www.boardandwall.com

Access Panel

Water resistant access panels

Aluminium frame
Push-open system
Zinc hinge, switch and hook
Knauf brand WR gypsum board
Available at sizes from 20×20 to 120×120
Custom design & multi-open
Electrostatic powder paint
Security

Technical Specification

1 - 12.5mm Aluminium Interior and Exterior Frame(EnAw6063)

4
Electrostatic Powder Paint 0,60 – 0,80mm
6 1 1
2 -3 Zinc Hinge (ZnAI4Cu) 7
8
3 -Zinc Hinge (ZnAI4Cu) 2

4 - Zinc Hinge (ZnAI4Cu)

5 - Zinc Switch (ZnAI4Cu)
6 -Push-open system 5
3
7 - Safety hook (Sae1060)
8 -Push-open system (AlMg2,5) 9

9 - 12.5mm Gypsum Board Moisture Resistant

CE EN 14190-EN14195 ISO 9001:2008 PATENT PT 2010-00999

0090 533 345 79 48 [email protected]

 www.boardandwall.com

Bituminous Membrane

0090 533 345 79 48 [email protected]

 www.boardandwall.com

Ceramic Fiber Wool

Ceramic Fiber Wool
Types of ceramic fibers
Ceramic fiber blanket
Ceramic fiber panel
Ceramic fiber module
Ceramic fiber wad (in bulk)

Application
Industrial furnaces
Boiler pipes and chimneys

All kinds of technical insulations requiring
high temperature: fire doors, household
Features
%!

 
' !
appliances (ovens), heat exchangers.
- %1!,)#
;"%1
"+!-*%3

Insulation material

- %1!,)#
;"%1
/!-%+

For applications between 650°C - 1430°C

- %1!,)#
;"%1
,.$4+%


Obtained by combining and melting aluminium, silica, zirconium

- %1!,)#
;"%1
6!$
)-
"4+*

High degree of thermal insulation
Low thermal conductivity value

"

Excellent sound and fire insulation
- -$4231)!+
&41-!#%2

Reduce heat loss
- .)+%1
/)/%2
!-$
#(),-%82


Quick and easy installation
- ++
*)-$2
.&
3%#(-)#!+
)-24+!3).-2
1%04)1)-'
()'(
3%,/%1!341%
;1%
!//+)!-#%2
.5%-2
(%!3
%7#(!-'%12

Technical specification & Sizes
Fiber diameter (micron): 3,5 - 4,5
25 x"# !


610 x 7200mm
- -24+!3).-
,!3%1)!+


50 x 610 x 3600mm
- .1
!//+)#!3).-2
"%36%%-
 :

:

- "3!)-%$
"8
#.,")-)-'
!-$
,%+3)-'
!+4,)-)4,
2)+)#!
9)1#.-)4,


4600 x 610 x 38mm

- )'(
$%'1%%
.&
3(%1,!+
)-24+!3).-


9200 x 610 x 19mm

- .6
3(%1,!+
#.-$4#3)5)38
5!+4%


14400 x 610 x 13mm

- 7#%++%-3
2.4-$
!-$
;1%
)-24+!3).-

- %$4#%
(%!3
+.22


- 4)#*
!-$
%!28
)-23!++!3).-

0090 533 345 79 48 [email protected]
 www.boardandwall.com

Earth Wool
Mineral Wool Roll

Application
Application:
Loft floor areas of new or existing residential or commercial buildings
- .&3
<..1
!1%!2
.&
-%6
.1
%7)23)-'
1%2)$%-3)!+
.1
#.,,%1#)!+
"4)+$)-'2


Technical specification

!'"

- Thickness:
Thickness: 50mm - 140mm ,,

,,

- Thermal
Thermal conductivity
conductivity coe
cient:
coefficient: 0,040  W/m.K
W/m.K - 0,044
,

- 1200mm
Width: Width:
,,

- 6000mm
Length: Length:
,,

,,


- 8000mm - 10000mm ,,

$..12
(.42%(.+$

Features:
- )'(36%)'(3
!-$
#.23
%%#3)5%
)-24+!3).-
2.+43).-


Features

- .6%1
3(%1,!+
#.-$4#3)5)38
/%1&%#3
3(%1,!+
)-24+!3).-

Lightweight and cost effective insulation solution
Lower-thermal
)'(
2.4-$
!"2.1/3).-


conductivity (perfect thermal insulation)
- )1%
1%2)23!-3
+!22

High sound absorption
!-$
41.#+!22
 

- #.&1)%-$+8


Fire resistant (Class A1 and Euroclass A1)
Eco-friendly

0090 533 345 79 48 [email protected]

 www.boardandwall.com

Mineral Wool

Application
Ideal for exterior facades and partition walls

Technical specification:
Thickness : 40mm - 240mm
Size : 600 x 1200mm
Density : 40 - 150 kg/m3

Features
Strong heat and sound insulation
Higher resistance to fire

0090 533 345 79 48 [email protected]