SMS Query
SMS SMS format (Brackets are not
Function Example
Instructions included)
Record, let the device number Call back the
1 SL MT(Tel+#) number in parentheses SL MT10086#
Get location information, the device replies
2 SL LC with location information SMS SL LC
3 SL FT Reset SL FT
4 SL RT Restart SL RT
SL DP(IP or domain name+#+
5 Switch server SL DP192.168.1.1#7981#
port number+#)
6 SL XM Set the device to sleep SL XM
7 SL HX Device wake up SL HX
Set the device SMS control number (After this
number is set, you can only use this number to
8 SL CP(NO.+#) send SMS messages to query and set device SL CP13100015678#
parameters
To query common information about the
9 SL CX device, such as the device number, IP domain SL CX
name, etc.
SL MODE(Positioning mode, short Set the device positioning mode,
connection interval, whether to Example: Set mode 2 to connect to the server
10 * every 5 minutes. Don't enable flight mode,
SL MODE2,5,0,5
enable flight mode, short connection
each connection lasts 5 minutes.
duration)
SL GZ( interval time:s, Track the device to upload location data at
11 intervals
SL GZ5,60
Tracking duration:s)
SL LOG(0：Close，1： Enable or disable the device upload LOG
12 function
SL LOG1
Open)
SL OTA(0：Close，1： The remote upgrade function was enabled or
13 disabled SL OTA1
Open)
SL LED(0：Close，1：
14 Turn on or off the device signal light SL LED1
Open)
Enable or disable the audio recording function
SL REC(0：Close，1： of the device
15 * SL REC1
Open)
Set the device positioning upload mode and
interval.
Upload mode:
SL SC( positioning upload mode,
16 * 0 scheduled upload, 1 interval upload, SL SC0,10
interval) Interval:
Upload mode: Periodic upload interval unit: s;
Upload mode: Fixed upload interval unit: m.
Set the positioning mode and wake up time.
There are three modes: 1, 2, 3. Only the time
17* SL DZMS(Mode，Time) after mode 3 is the wake up time.
SL DZMS3,0830
For example, 0830 means wake up at 8:30
Set the APN required for Internet access. If the
18 SL APN(apn, username,password) user name and password are blank, do not SL APNcmnet,,
enter them，but keep ', '
Query the IMEI of device
19 SL IE SL IE
20 SL ICCID Query the ICCID of device SL ICCID
Note: All symbols in the SMS command are English symbols, with * for some models support.
