0% found this document useful (0 votes)
34 views2 pages

Varian 1090

Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
34 views2 pages

Varian 1090

Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

1090 Compact Low Thermal Mass

On-Column Septumless
Capillary Injector
[Introduced in 1985]

Distinctive external
feature – Unusual
syringe guide alignment
assembly on top of
injector and no heater
connections.

• First introduced with Varian 3500 Dedicated


Capillary Gas Chromatograph
• NO SEPTUM!! Syringe needle seals with
operator twist of injector body.
• NO HEATER!! Sample is injected on-column
inside column oven.
• NO SPLITTER!! Direct on-column injection.
• Flow controlled pneumatics for constant flow,
even with temperature programming.
• All capillary pneumatics are thermostatically
controlled to ensure great retention time
reproducibilities independent of changes in
ambient temperature.
• COMPETITIVE ADVANTAGES – Low cost
septumless injector.
1095/1097 Temperature Programmable
On-Column Septumless Capillary
Injector (SPI) for Varian 3700/Vista
6000/Varian 3400/Varian 3500/
Varian 3600 – LCO2 Coolant
[Introduced in 1985]
Distinctive external
feature – Notable needle
guide arrangement with
rocker arm; no septum.

• First introduced with Varian 3500 Dedicated Capillary


Gas Chromatograph.
• Sample injects directly into narrow-bore capillary
columns through a special “rocker” valve arm to not
interrupt column flow.
• Complete elimination of active sites in injection process.
• Programmable temperature range -60 oC to +420 oC.
• Flow controlled pneumatics for constant flow, even with
temperature programming.
• All pneumatics are thermostatically controlled to ensure
great retention time reproducibilities independent of
changes in ambient temperature.
• NO SEPTUM!! Syringe needle seals with special
“rocker” valve.
• Inlet purge provided to sweep sample introduction
volume.
• 8035 AutoSamplerTM * automates injection with full control of special rocker valve arm.
• COMPETITIVE ADVANTAGES – First subambient capillary injector with direct on-
column narrow-bore capillary injection. Capillary pneumatics thermostatically
controlled.

1096/1098 Temperature Programmable On-Column Septumless


Capillary Injector for Varian 3700/Vista 6000/Varian 3400/
Varian 3500/Varian 3600 – LN2 Coolant
[Introduced in 1985]
• Similar to 1095. with temperature range from -99 oC to +420 oC.

*
AutoSampler is a registered trademark of Varian, Inc.

You might also like