Project Name : Face Lift Project

Owner : Dreem
Main Consultant : Elite Consolidated Engineers
Main Contractor : Aircom Electromechanics

Material Submittal No. ( PO Number MS-(M/E/STL/C/Arch)-01-00 )

Owner : Dreem Date : 28 - 09 -2024

Main Consultant : Elite Consolidated Engineers To : ECE

Main Contractor : Aircom Electromechanics Subject : MS-02-00

Material Submittal Category :

Structural Civil Architectural Mechanical Electrical

Firefighting Low Current
Location : ROOF Spec. Ref : 15671 , 15725 HVAC Fire Alarm
Plumbing Lighting
Drawing Ref : 06. MH-102 BOQ Ref : ITEM NO 15725 ) ‫ ت‬, ‫ ب‬, ‫ ( ا‬,15671 ) ‫ ج‬, ‫ ث‬, ‫( ت‬ Power

Item Material Submittal Description Attachments NO. Of Copies Notes

1 CU-01 & AHU-01 TECHNICAL SUBMITTAL 1

2 CU-02 & AHU-02 TECHNICAL SUBMITTAL 1

2 CU-03 & AHU-03 TECHNICAL SUBMITTAL 1

For Approval Reviewed

Information Others

Contractor Sign

Technical Engineer
Signature :
Name : ABDALLA RAMADAN

Consultant Sign

Consultant Receiving
Signature :
Document Controller :

Consultant Comment:

Approved (A) Approved as Noted (B) Revise and Resubmit (C) Rejected (D)

Consultant Engineer : PM Engineer : Contractor Engineer : Owner Engineer :

Date : Date : Date : Date :

ECE-SD-01 1/1 Issue Date: 8/8/2022

 REF: DATE:
24‐0524‐DXAH/CU‐R0 Wednesday, September 4, 2024

PROJECT:

Dreem Factory – Face lift

CONSULTANT:

elite consolidated ENGINEERS ( ECE )

DCM AIR HANDLING UNITS & CONDENSING UNITS ASSEMBLED IN EGYPT BY:
DELTA CONSTRUCTION & MANUFACTURING CO.
 Date Wednesday,September 4, 2024
To Engineering Department Our reference 24‐0524‐DXAH‐R1

SUBJECT: Dreem Factory – Face lift

TECHNICAL DESCRIPTION

*** DCM AIR HANDLING UNITS, INCLUDES THE FOLLOWING:

 Double Skin Casing Insulated With 50‐mm thickness Injected Polyurethane 40 Kg/m³ Density.
 AMCA Certified High Efficiency Backward Supply Fan C/W Grease Lubricated Ball Bearings .
 Direct Expansion Cooling Coil ( CU tubes / Blue Hydrophilic AL fins / 4 Rows / R‐410A/ CU headers ) .
 Electrostatic Prepainted Galvanized Steel External Sheet (1.3 mm Thick).
 Galvanized Steel Internal Sheets (1.0 mm Thick).  Hinged Access Doors.
 CE Certified IE3 Motor 1500‐RPM (3Ø/380 V/50 Hz).  V‐Belt transmission with cast iron pulley.
 Spring Vibration isolators for fan assembly.  Fire Retardent Flexible connections at fan exit.
 U‐Channel Common Base.  Double‐Wall Stainless steel drain pan (Grade: AISI‐316) .
Model T.C.Cap. Air Flow E. S. P. QTY.
Item
Horizontal KW LPS PA #
AHU‐01 GHX 570A 160.9 7,530 400 1
AHU‐02 GHX 335A 104.4 4,200 650 1
AHU‐03 GHX 825A 175.0 11,000 650 1

ACCESSORIES CONSIST OF:

 Synthetic Media Pre‐Filter (Filter Class: G4) 50‐mm thickness For All Units .
 Long Fiberglass Media Bag Filter 95% EFF (Filter Class: F9) For All Units .
 2‐Way Mixing Box C/W Dampers For All Units .
 Sight Glass Window, Bulk Head Light & Switch For Fan Sections For All Units .

 DELIVERY LOCATION:

● DCM FACTORY IN 10" OF RAMADAN.

 WARRANTEE:
● 12 – Months from the date of delivery.
 ORIGIN:
● EGYPT.

94 Al Nozha St. Helipolis ‐ Cairo ‐ Egypt

Tel. : (+20)2‐224153392
Fax. : (+20)2‐224153406
www.deltadcm.com
 Date Wednesday, September 4, 2024
To Engineering Department
Our reference 24‐0524‐ACU‐R0
SUBJECT: Dreem Factory – Face lift

TECHNICAL DESCRIPTION
DCM AIR COOLED CONDENSING UNITS

 Scroll, hermetic compressors designed for R – 410A.

 CE Certified Direct drive condenser axial fans with thermally protected motors.
 Direct Expansion Condencer Coil ‐ Copper Tubes / Blue‐Hydrophilic AL Fins.
 Digital controls for maximum efficiency stores & displays various data.
 Safety devices for convenience operation.
 Washable Vinyl Chloride Dust Collector Filter .
 Hot Gas By‐Pass For Winter Operation.

* Selection Based on Amb. Air Temp. 40 ºC

C.Capacity Number Of Q'TY.
Model
m
Ite

kW Circuits #
CU‐01 PAS‐6006 SCX 160.9 4 1
CU‐02 PAS‐4006 SCX 104.4 2 1
CU‐03 PAS‐6006 SCX 175.0 4 1

*** GENERAL NOTES:

1. Warrantee:
● 12 – Months from the date of delivery.
2. Origin:
● Assembled in Egypt.

94 Al Nozha St. Helipolis ‐ Cairo ‐ Egypt

Tel. : (+20)2‐224153392
Fax. : (+20)2‐224153406
www.deltadcm.com
 Unit ID: 2098-24-00-001
TECHNICAL DATA
Date 04/09/2024 Rev. Date 04/09/2024
Project ID 2098 Tracking Number 24-0524-DXAH
Project Name Dreem Factory – Face lift
AHU Name AHU-01 - (1 QTY) HVACCALC V. 2.2.3.32
20/08/2024

AHU Model GHX 570A DCM 1/4

RIGHT VIEW

TOP VIEW
GENERAL SPECIFICATIONS
Air Flow Model / Frame

GHX (Green Horizontal DX Units)

7.53 m³/s / ANODIZED OMEGA 50
Insulation Material Total Weight

50 mm injected Polyurethane 45
kg/m³ 1,546 kg
Coil Air Velocity Air Density Outside Sheet Material Base Height
1.2101 kg/m³ 1.3 mm Electrostatic Prepainted
2.34 m/s Galvanized Steel Sh. 130 mm
Inside Sheet Material Motor Power
1 mm Galvanized Steel Sh.M.ZS 11 kW
Total Cooling Capacity Total Sensible Capacity
160.92 kW 132.12 kW

www.deltadcm.com Office Tel: 02224153392 Factory Tel: 02224153406

[email protected] Office Fax: 02224153406

Designer: MOATAZ HASSAN 04.09.2024

HVAC Calculator
 Unit ID: 2098-24-00-001
TECHNICAL DATA
Date 04/09/2024 Rev. Date 04/09/2024
Project ID 2098 Tracking Number 24-0524-DXAH
Project Name Dreem Factory – Face lift
AHU Name AHU-01 - (1 QTY) HVACCALC V. 2.2.3.32
20/08/2024

AHU Model GHX 570A DCM 2/4

SOUND PRESSURE LEVEL (dB) [Distance = 3 m]
Frequency Hz 63 125 250 500 1000 2000 4000 8000 LwA-tot
Airborne Sound Pressure Level 45.9 44.2 37.7 31.6 25.1 18.8 8.7 0.0 34.7 dBA
Air Outlet Induct Sound Pressure Level 64.9 63.2 64.7 62.6 59.1 52.8 45.7 39.6 64.1 dBA
Air Inlet Induct Sound Pressure Level 47.5 45.8 49.0 42.0 38.5 39.1 32.7 27.6 46.5 dBA
ACCESSORIES
Bulk Head Light,Sight Glass,On-Off Switch,Flexible Connector

SUPPLY CONNECTION
Connection Type Control Type Pressure Drop
Flange 0 Pa
Air Flow Dimensions Air Velocity
7.53 m³/s W 898 mm x H 898 mm 9.34 m/s
MIXING MODULE WITH TWO DAMPERS (M1)
Connection Type Condensation Pan Pressure Drop Section Weight

Gear Damper 54 Pa 271.4 kg

Fresh Air Control Type Return Air Control Type
Manual Manual
Fresh Air Volume Return Air Volume
0.715 m³/s 6.82 m³/s
Fresh Air Dimensions Return Air Dimensions
W 525 mm x H 400 mm W 1,400 mm x H 1,300 mm
Fresh Air Velocity Return Air Velocity

3.4 m/s 3.74 m/s

Fresh Air Capacity Return Air Capacity

50 % 50 %
DOORS (M1)
ID Type Handle Type Size Position Hinge Position Alignment Opposing Door

1 Standard (Handle + Hinge) With Lock 525 mm x 1,400 mm Right Left Right
ACCESSORIES (M1)

FILTER (M2)
Air Flow Condensation Pan Slide Type Hygienic Spare Filter Section Weight
7.53 m³/s None 225.5 kg
Filter Type

G4 Panel
Initial / Final / Design P.Drop Air Velocity Size/Quantity Size/Quantity Size/Quantity Size/Quantity
72 Pa / 150 Pa / 111 Pa 2.54 m/s 292x592x48/5 592x592x48/6
Filter Type

F9 Bag
Initial / Final / Design P.Drop Air Velocity Size/Quantity Size/Quantity Size/Quantity Size/Quantity
183 Pa / 250 Pa / 216 Pa 2.54 m/s 592x592x600/6 292x592x600/5
* Frame sealing applied.

www.deltadcm.com Office Tel: 02224153392 Factory Tel: 02224153406

[email protected] Office Fax: 02224153406

Designer: MOATAZ HASSAN 04.09.2024

HVAC Calculator
 Unit ID: 2098-24-00-001
TECHNICAL DATA
Date 04/09/2024 Rev. Date 04/09/2024
Project ID 2098 Tracking Number 24-0524-DXAH
Project Name Dreem Factory – Face lift
AHU Name AHU-01 - (1 QTY) HVACCALC V. 2.2.3.32
20/08/2024

AHU Model GHX 570A DCM 3/4

ACCESSORIES (M2)

COIL (DX) (Wet Surface) (M3)

Air Flow Capacity / Sensible Required Capacity Face Velocity Pitch Quantity Section Weight
7.53 m³/s 160.92/132.12 kW 2.34 m/s 2.5 1 268.7 kg
Coil Code Tube Material Fin Material Function
25 x 22 3/8 64T 4R 1980A 2.5P Copper Aluminium Cooling
Droplet Elimin. / Press. Drop Condensation Pan / Hmin U-Trap Tube Thickness Fin Thickness Mixing Ratio
AISI 316 (31.75 mm (ød)) 0.35 mm 0.11 mm 0%
(Connection:Right) Size (W x H x L) mm Conn. Material Frame Material
(Pressure:Negative) / 86.12
mm 1,980 x 1,624 x 156 Copper Galvanized Steel
Fluid Kind Evaporation/Condensation/SCD/OH
R410A 4.7/52.7/8.3/8.3 °C
Air Inlet Drybulb Temperature Air Outlet Drybulb Temperature
25.3 °C 10.9 °C
Air Inlet Wetbulb Temperature Air Outlet Wetbulb Temperature
16.7 °C 9.5 °C
Air Inlet Relative Humidity Air Outlet Relative Humidity
41.75 % 84.08 %
Air Inlet - Outlet Enthalpy Fluid Flow / Vol. Flow
46.98 - 28.12 kJ/kg 3,722 kg/h / 2,756 L/min
Air Press.Drop(Wet/Dry) Fluid Press.Drop / Fluid Velocity
63 Pa / 59 Pa 49.70 kPa / 0.65 m/s
Coil Surface Area Tube Inner Volume
225.3 m² 40.25 L
Manifold / Conn.QTY Conn.Direction
4/ 4 Right
Connection Sizes Air Condensation Hygienic Blygold

7/8'' - 1 3/8'' 37.9739 l/h

ACCESSORIES (M3)

www.deltadcm.com Office Tel: 02224153392 Factory Tel: 02224153406

[email protected] Office Fax: 02224153406

Designer: MOATAZ HASSAN 04.09.2024

HVAC Calculator
 Unit ID: 2098-24-00-001
TECHNICAL DATA
Date 04/09/2024 Rev. Date 04/09/2024
Project ID 2098 Tracking Number 24-0524-DXAH
Project Name Dreem Factory – Face lift
AHU Name AHU-01 - (1 QTY) HVACCALC V. 2.2.3.32
20/08/2024

AHU Model GHX 570A DCM 4/4

SUPPLY FAN (M4)
Air Flow Motor Type Fan Model Quantity Section Weight
7.53 m³/s AC RDH 710 K 1 780 kg
Internal Static Pressure Motor P./Pha./Volt./Freq. Isolator Isolator Count
444 Pa 11 kW/3P/380V/50V-Hz SMA Spring 6
External Static Pressure Motor Speed Backup Fan Backup Motor Backup Inverter
400 Pa 1500 (1455)rpm 0 0 0
Total Static Pressure
844 Pa
Total Pressure
897 Pa
Total / Static Efficiency
82.04 / 82.04 %

Shaft Power
8.24 kW
Fan Speed Running Frequency
1075 rpm (Max. 1500 rpm) 50.00 Hz
Fan Outlet Air Velocity Air Density
9.34 m/s 1.2264 kg/m³

Sound Power Level (dB)

Hz 63 125 250 500 1000 2000 4000 8000 LwA-tot
Outlet Side 90.7 89.0 90.5 88.4 84.9 78.6 71.5 65.4 89.8 dBA
Inlet Side 89.3 87.6 90.8 83.8 80.3 76.9 70.5 65.4 86.9 dBA
* The fan system effect is taken into account in the fan performance
* The fan calculated for wet conditions
DOORS (M4)
ID Type Handle Type Size Position Hinge Position Alignment Opposing Door

1 Standard (Handle + Hinge) With Lock 525 mm x 1,400 mm Right Left Left
ACCESSORIES (M4)
Bulk Head Light,Sight Glass,On-Off Switch,Flexible Connector

www.deltadcm.com Office Tel: 02224153392 Factory Tel: 02224153406

[email protected] Office Fax: 02224153406

Designer: MOATAZ HASSAN 04.09.2024

HVAC Calculator
 PROJECT:

Dreem Factory – Face lift

PRODUCT : CONDENSING UNITS

TYPE : AIR COOLED - AXIAL FANS
ITEM : CU-01
MODEL : PAS-6006 SCX
QT'Y. : 1#

DCM CONDENSING UNITS MANUFACTURED IN EGYPT BY:

DELTA CONSTRUCTION & MANUFACTURING CO.
 CONDENSING UNIT TECHNICAL DATA SHEET Wednesday, September 4, 2024

Project Customer
Dreem Factory – Face lift
Model Ref
PAS-6006 SCX CU-01
Capacity (Btu/hr) Capacity (KW) Ambient Temperature (°C) Air Oulet Temp. (°C)
551,726 160.92 40.0 48.7
PERFORMANCE & Power Input (hp) Power Input (KW) EER (
BTU/HR
/W) COP
INPUT DATA 77.33 57.71 9.56 2.79
Weight (kg) Capacity Control (%) Main Power
1400 0 - 25 - 50 - 75 - 100 380/3/50
Type Flow Rate (CMH) Piping (Liquid/Gas)
Multi-pass cross finned tube 78,880 (7/8 - 1 3/8) Ø
CONDENSER Fan Type Q'TY x Motor Power (hp)
Axial fan 8 x 1.0
Type Q'TY x Power Intput (hp) Lubricant type
Hermetic Scroll 4 X 17.3 POE Oil
COMPRESSOR RLA (Amp) LRA (Amp) Comp. Model No. Of Circuits
34 174 ZP 182KCE 4
Refrigerant Evaporating Temp. (°C) Suction Temp. (°C) Condensing Temp. (°C)
R-410A 4.7 4.5 52.7
REFRIGERANT Subcooling (K) Superheat (K) Charge (kg)
8.3 8.3 4 x 11.6
High Pressure Switch Low Pressure Switch Filter Driers Hot Gas By Pass
SAFETY DEVICE &
Internal Overload External Overload Magnetic Contactor Shutt Off Valve
ACCESSORY Temperature Controller Expansion Valve Phase Failur Devise Control Switch
 9/4/2024

AHU-01-GHX 570A - PAS 6006 SCX - 4 Circuits

Simulation Outputs

Outlet Air: 48.7 °C DB

Pressure: 3147 kPa Pressure: 3164 kPa

Condenser
Temperature: 44.3 °C Temperature: 84.4 °C
Saturation Temp: 52.7 °C Saturation Temp: 52.9 °C
Enthalpy: 120.5 kJ/kg Enthalpy: 323.9 kJ/kg
Subcooling: 8.3 K

Inlet Air: 40.0 °C DB / 25.5 °C WB

Pressure: 3145 kPa Air Flow Rate: 328.5 m³/min Pressure: 3165 kPa
Temperature: 44.2 °C Temperature: 85.3 °C
Saturation Temp: 52.6 °C Saturation Temp: 52.9 °C
Subcooling: 8.4 K COOLING MODE Enthalpy: 325.0 kJ/kg

System Capacity: 40.23 kW

Compressor Power: 12,927 W
Condenser Fan Power: 1500 W
Total Power: 14,427 W Compressor
COP: 2.79
Flow Sensible Heat Ratio: 0.821
Control Copeland Compressor: ZP182KCE-TFD
Refrigerant: R-410A
Refrigerant Charge: 11.60 kg
Pressure: 816 kPa
Temperature: 12.9 °C
Saturation Temp: 4.5 °C
Enthalpy: 280.0 kJ/kg
Outlet Air: 10.9 °C DB / 9.5 °C WB Superheat: 8.3 K

Pressure: 835 kPa Evaporator Pressure: 821 kPa

Temperature: 5.2 °C Temperature: 12.8 °C
Enthalpy: 120.3 kJ/kg Saturation Temp: 4.7 °C
Ref. Flow Rate: 930.4 kg/hr Enthalpy: 279.8 kJ/kg
Superheat: 8.1 K

Inlet Air: 25.3 °C DB / 16.7 °C WB

Air Flow Rate: 113.0 m³/min
 AIR CONDITIONING ZP182KCE-TFD
HFC-410A
COPELAND SCROLL®
TFD 380/420-3-50

Evaporating Temperature °C (Sat. Dew Pt. Pressure, bar)

-23(3.6) -19(4.1) -14(5) -10(5.7) -5(6.8) 0(8) 4(9) 8(10.2) 13(11.8)

61 C 30,000 35,000 40,500 48,000
(39.1) P 15,400 15,500 15,500 15,500
A 29.3 29.3 29.4 29.4
M 212 244 278 326
E 2 2.3 2.6 3.1
% 65.2 68.4 70.9 73
56 C 27,300 33,000 38,000 44,000 52,000
(35) P 13,800 13,800 13,900 13,900 14,000
A 26.7 26.8 26.9 27 27
M 182 217 249 283 331
E 2 2.4 2.8 3.2 3.7
% 65.1 69.3 71.7 73.4 74.4
51 C 24,300 29,700 36,000 41,000 47,500 56,000
Condensing Temperature °C
(Sat. Dew Pt. Pressure, bar)

(31.2) P 12,300 12,300 12,400 12,500 12,600 12,700

A 24.5 24.6 24.7 24.8 24.9 25.1
M 154 186 221 252 287 336
E 2 2.4 2.9 3.3 3.8 4.4
% 64.3 69.1 72.3 73.9 74.7 74.5
46 C 22,100 26,300 32,000 38,500 44,000 50,500 59,500
(27.8) P 10,900 11,000 11,100 11,200 11,300 11,400 11,500
A 22.6 22.7 22.9 23 23.1 23.2 23.4
M 134 157 189 224 255 290 339
E 2 2.4 2.9 3.4 3.9 4.4 5.2
% 63.8 68.1 71.8 74 74.7 74.5 72.9
41 C 18,900 23,800 28,000 34,000 40,500 46,500 53,500 63,000
(24.7) P 9,750 9,800 9,900 10,000 10,100 10,200 10,300 10,400
A 20.9 21.1 21.2 21.4 21.5 21.7 21.8 21.9
M 109.5 137 159 191 226 257 292 343
E 1.9 2.4 2.8 3.4 4 4.6 5.2 6.1
% 61.1 67.3 70.6 73.2 74.3 74 72.8 69.6
36 C 16,600 20,300 25,300 29,700 36,000 43,000 49,000 56,500 67,000
(21.8) P 8,700 8,750 8,850 8,950 9,050 9,150 9,250 9,350 9,450
A 19.5 19.7 19.9 20 20.1 20.3 20.4 20.5 20.7
M 93 112.5 138 161 192 227 259 295 346
E 1.9 2.3 2.9 3.3 4 4.7 5.3 6 7.1
% 59 64.7 69.5 71.9 73.3 73.2 71.8 69.3 64.3
32 C 17,700 21,400 26,400 31,000 37,000 44,500 51,000 59,000 69,500
(19.8) P 7,950 8,050 8,150 8,250 8,350 8,450 8,550 8,650 8,700
A 18.7 18.8 19 19.1 19.3 19.4 19.5 19.6 19.7
M 95.5 114.5 140 162 193 228 260 297 349
E 2.2 2.7 3.2 3.8 4.5 5.3 6 6.8 8
% 62 66.7 70.5 72.2 72.6 71.4 69.1 65.4 58.7
27 C 18,900 22,700 27,800 32,500 39,000 46,500 54,000 62,000 73,500
(17.4) P 7,150 7,250 7,350 7,450 7,550 7,650 7,700 7,750 7,800
A 17.8 17.9 18.1 18.1 18.3 18.4 18.4 18.5 18.6
M 98 116 141 163 194 230 262 299 352
E 2.6 3.1 3.8 4.4 5.2 6.1 7 8 9.4
% 65 68.5 71 71.6 70.8 68 64.2 58.8 49.3
C: Capacity (W), P: Power (W), A: Current (Amps), M: Mass Flow (gm/s), E: COP (W/W), %: Isentropic Efficiency (%)
 Unit ID: 2098-24-00-002
TECHNICAL DATA
Date 04/09/2024 Rev. Date 04/09/2024
Project ID 2098 Tracking Number 24-0524-DXAH
Project Name Dreem Factory – Face lift
AHU Name AHU-02 - (1 QTY) HVACCALC V. 2.2.3.32
20/08/2024

AHU Model GHX 335A DCM 1/4

RIGHT VIEW

TOP VIEW
GENERAL SPECIFICATIONS
Air Flow Model / Frame

GHX (Green Horizontal DX Units)

4.2 m³/s / ANODIZED OMEGA 50
Insulation Material Total Weight

50 mm injected Polyurethane 45
kg/m³ 955 kg
Coil Air Velocity Air Density Outside Sheet Material Base Height
1.2101 kg/m³ 1.3 mm Electrostatic Prepainted
2.37 m/s Galvanized Steel Sh. 130 mm
Inside Sheet Material Motor Power
1 mm Galvanized Steel Sh.M.ZS 7.5 kW
Total Cooling Capacity Total Sensible Capacity

104.42 kW 79.05 kW

www.deltadcm.com Office Tel: 02224153392 Factory Tel: 02224153406

[email protected] Office Fax: 02224153406

Designer: MOATAZ HASSAN 04.09.2024

HVAC Calculator
 Unit ID: 2098-24-00-002
TECHNICAL DATA
Date 04/09/2024 Rev. Date 04/09/2024
Project ID 2098 Tracking Number 24-0524-DXAH
Project Name Dreem Factory – Face lift
AHU Name AHU-02 - (1 QTY) HVACCALC V. 2.2.3.32
20/08/2024

AHU Model GHX 335A DCM 2/4

SOUND PRESSURE LEVEL (dB) [Distance = 3 m]
Frequency Hz 63 125 250 500 1000 2000 4000 8000 LwA-tot
Airborne Sound Pressure Level 44.8 43.4 38.8 32.3 27.8 23.2 13.9 3.8 35.8 dBA
Air Outlet Induct Sound Pressure Level 63.8 62.4 65.8 63.3 61.8 57.2 50.9 45.8 66.3 dBA
Air Inlet Induct Sound Pressure Level 43.3 44.8 50.0 46.2 40.4 41.8 37.5 33.1 48.7 dBA
ACCESSORIES
Bulk Head Light,Sight Glass,On-Off Switch,Flexible Connector

SUPPLY CONNECTION
Connection Type Control Type Pressure Drop
Flange 0 Pa
Air Flow Dimensions Air Velocity
4.2 m³/s W 638 mm x H 638 mm 10.32 m/s
MIXING MODULE WITH TWO DAMPERS (M1)
Connection Type Condensation Pan Pressure Drop Section Weight

Gear Damper 58 Pa 170.9 kg

Fresh Air Control Type Return Air Control Type
Manual Manual
Fresh Air Volume Return Air Volume
1 m³/s 3.2 m³/s
Fresh Air Dimensions Return Air Dimensions
W 525 mm x H 500 mm W 1,050 mm x H 800 mm
Fresh Air Velocity Return Air Velocity

3.81 m/s 3.81 m/s

Fresh Air Capacity Return Air Capacity

50 % 50 %
DOORS (M1)
ID Type Handle Type Size Position Hinge Position Alignment Opposing Door

1 Standard (Handle + Hinge) With Lock 525 mm x 1,400 mm Right Left Right
ACCESSORIES (M1)

FILTER (M2)
Air Flow Condensation Pan Slide Type Hygienic Spare Filter Section Weight
4.2 m³/s None 160.5 kg
Filter Type

G4 Panel
Initial / Final / Design P.Drop Air Velocity Size/Quantity Size/Quantity Size/Quantity Size/Quantity
66 Pa / 150 Pa / 108 Pa 2.4 m/s 292x592x48/2 592x592x48/4
Filter Type

F9 Bag
Initial / Final / Design P.Drop Air Velocity Size/Quantity Size/Quantity Size/Quantity Size/Quantity
170 Pa / 250 Pa / 210 Pa 2.4 m/s 592x592x600/4 292x592x600/2
* Frame sealing applied.

www.deltadcm.com Office Tel: 02224153392 Factory Tel: 02224153406

[email protected] Office Fax: 02224153406

Designer: MOATAZ HASSAN 04.09.2024

HVAC Calculator
 Unit ID: 2098-24-00-002
TECHNICAL DATA
Date 04/09/2024 Rev. Date 04/09/2024
Project ID 2098 Tracking Number 24-0524-DXAH
Project Name Dreem Factory – Face lift
AHU Name AHU-02 - (1 QTY) HVACCALC V. 2.2.3.32
20/08/2024

AHU Model GHX 335A DCM 3/4

ACCESSORIES (M2)

COIL (DX) (Wet Surface) (M3)

Air Flow Capacity / Sensible Required Capacity Face Velocity Pitch Quantity Section Weight
4.2 m³/s 104.42/79.05 kW 2.37 m/s 2.5 1 183.7 kg
Coil Code Tube Material Fin Material Function
25 x 22 3/8 48T 4R 1455A 2.5P Copper Aluminium Cooling
Droplet Elimin. / Press. Drop Condensation Pan / Hmin U-Trap Tube Thickness Fin Thickness Mixing Ratio
AISI 316 (31.75 mm (ød)) 0.35 mm 0.11 mm 0%
(Connection:Right) Size (W x H x L) mm Conn. Material Frame Material
(Pressure:Negative) / 111.2
mm 1,455 x 1,219 x 156 Copper Galvanized Steel
Fluid Kind Evaporation/Condensation/SCD/OH
R410A 4.6/52.5/8.3/8.3 °C
Air Inlet Drybulb Temperature Air Outlet Drybulb Temperature
27 °C 11.4 °C
Air Inlet Wetbulb Temperature Air Outlet Wetbulb Temperature
18.3 °C 10.4 °C
Air Inlet Relative Humidity Air Outlet Relative Humidity
43.25 % 89.23 %
Air Inlet - Outlet Enthalpy Fluid Flow / Vol. Flow
51.9 - 30.48 kJ/kg 2,374 kg/h / 1,797 L/min
Air Press.Drop(Wet/Dry) Fluid Press.Drop / Fluid Velocity
64 Pa / 58 Pa 36.78 kPa / 0.64 m/s
Coil Surface Area Tube Inner Volume
128.9 m² 23.02 L
Manifold / Conn.QTY Conn.Direction
2/ 2 Right
Connection Sizes Air Condensation Hygienic Blygold

7/8'' - 1 5/8'' 37.9018 l/h

ACCESSORIES (M3)

www.deltadcm.com Office Tel: 02224153392 Factory Tel: 02224153406

[email protected] Office Fax: 02224153406

Designer: MOATAZ HASSAN 04.09.2024

HVAC Calculator
 Unit ID: 2098-24-00-002
TECHNICAL DATA
Date 04/09/2024 Rev. Date 04/09/2024
Project ID 2098 Tracking Number 24-0524-DXAH
Project Name Dreem Factory – Face lift
AHU Name AHU-02 - (1 QTY) HVACCALC V. 2.2.3.32
20/08/2024

AHU Model GHX 335A DCM 4/4

SUPPLY FAN (M4)
Air Flow Motor Type Fan Model Quantity Section Weight
4.2 m³/s AC RDH 500 K 1 440 kg
Internal Static Pressure Motor P./Pha./Volt./Freq. Isolator Isolator Count
440 Pa 7.5 kW/3P/380V/50V-Hz SMA Spring 4
External Static Pressure Motor Speed Backup Fan Backup Motor Backup Inverter
650 Pa 1500 (1430)rpm 0 0 0
Total Static Pressure
1,090 Pa
Total Pressure
1,155 Pa
Total / Static Efficiency
79.23 / 79.23 %

Shaft Power
6.12 kW
Fan Speed Running Frequency
1759 rpm (Max. 2350 rpm) 50.00 Hz
Fan Outlet Air Velocity Air Density
10.32 m/s 1.2264 kg/m³

Sound Power Level (dB)

Hz 63 125 250 500 1000 2000 4000 8000 LwA-tot
Outlet Side 89.6 88.2 91.6 89.1 87.6 83.0 76.7 71.6 91.9 dBA
Inlet Side 85.1 86.6 91.8 88.1 82.3 79.6 75.3 70.9 89.5 dBA
* The fan system effect is taken into account in the fan performance
* The fan calculated for wet conditions
DOORS (M4)
ID Type Handle Type Size Position Hinge Position Alignment Opposing Door

1 Standard (Handle + Hinge) With Lock 525 mm x 1,400 mm Right Left Left
ACCESSORIES (M4)
Bulk Head Light,Sight Glass,On-Off Switch,Flexible Connector

www.deltadcm.com Office Tel: 02224153392 Factory Tel: 02224153406

[email protected] Office Fax: 02224153406

Designer: MOATAZ HASSAN 04.09.2024

HVAC Calculator
 PROJECT:

Dreem Factory – Face lift

PRODUCT : CONDENSING UNITS

TYPE : AIR COOLED - AXIAL FANS
ITEM : CU-02
MODEL : PAS-4006 SCX
QT'Y. : 1#

DCM CONDENSING UNITS MANUFACTURED IN EGYPT BY:

DELTA CONSTRUCTION & MANUFACTURING CO.
 CONDENSING UNIT TECHNICAL DATA SHEET Wednesday, September 4, 2024

Project Customer
Dreem Factory – Face lift
Model Ref
PAS-4006 SCX CU-02
Capacity (Btu/hr) Capacity (KW) Ambient Temperature (°C) Air Oulet Temp. (°C)
358,011 104.42 40.0 47.6
PERFORMANCE & Power Input (hp) Power Input (KW) EER (BTU/HR/W) COP
INPUT DATA 51.20 38.21 9.37 2.73
Weight (kg) Capacity Control (%) Main Power
750 0 - 50 - 100 380/3/50
Type Flow Rate (CMH) Piping (Liquid/Gas)
Multi-pass cross finned tube 57,800 (7/8 - 1 5/8) Ø
CONDENSER Fan Type Q'TY x Motor Power (hp)
Axial fan 4 x 2.0
Type Q'TY x Power Intput (hp) Lubricant type
Hermetic Scroll 2 X 21.6 POE Oil
COMPRESSOR RLA (Amp) LRA (Amp) Comp. Model No. Of Circuits
38.2 219 ZP 232KCE 2
Refrigerant Evaporating Temp. (°C) Suction Temp. (°C) Condensing Temp. (°C)
R-410A 4.6 4.3 52.5
REFRIGERANT Subcooling (K) Superheat (K) Charge (kg)
8.3 8.3 2 X 11.5
High Pressure Switch Low Pressure Switch Filter Driers Hot Gas By Pass
SAFETY DEVICE &
Internal Overload External Overload Magnetic Contactor Shutt Off Valve
ACCESSORY Temperature Controller Expansion Valve Phase Failur Devise Control Switch
 9/4/2024

AHU-02-GHX 335A - PAS 4006 SCX - 2 Circuits

Simulation Outputs

Outlet Air: 47.6 °C DB

Pressure: 3132 kPa Pressure: 3161 kPa

Condenser
Temperature: 44.1 °C Temperature: 83.7 °C
Saturation Temp: 52.5 °C Saturation Temp: 52.9 °C
Enthalpy: 120.1 kJ/kg Enthalpy: 323.0 kJ/kg
Subcooling: 8.3 K

Inlet Air: 40.0 °C DB / 25.0 °C WB

Pressure: 3128 kPa Air Flow Rate: 481.4 m³/min Pressure: 3162 kPa
Temperature: 44.0 °C Temperature: 84.4 °C
Saturation Temp: 52.4 °C Saturation Temp: 52.9 °C
Subcooling: 8.4 K COOLING MODE Enthalpy: 323.9 kJ/kg

System Capacity: 52.21 kW

Compressor Power: 16,106 W
Condenser Fan Power: 3000 W
Total Power: 19,106 W Compressor
COP: 2.73
Flow Sensible Heat Ratio: 0.757
Control Copeland Compressor: ZP232KCE-TED
Refrigerant: R-410A
Refrigerant Charge: 11.49 kg
Pressure: 810 kPa
Temperature: 12.6 °C
Saturation Temp: 4.3 °C
Enthalpy: 279.9 kJ/kg
Outlet Air: 11.4 °C DB / 10.4 °C WB Superheat: 8.3 K

Pressure: 826 kPa Evaporator Pressure: 818 kPa

Temperature: 4.9 °C Temperature: 12.7 °C
Enthalpy: 119.9 kJ/kg Saturation Temp: 4.6 °C
Ref. Flow Rate: 1187.2 kg/hr Enthalpy: 279.7 kJ/kg
Superheat: 8.1 K

Inlet Air: 27.0 °C DB / 18.3 °C WB

Air Flow Rate: 126.0 m³/min
 AIR CONDITIONING ZP232KCE-TED
HFC-410A
COPELAND SCROLL®
TED 380/420-3-50

Evaporating Temperature °C (Sat. Dew Pt. Pressure, bar)

-23(3.6) -19(4.1) -14(5) -10(5.7) -5(6.8) 0(8) 4(9) 8(10.2) 13(11.8)

61 C 39,500 46,000 52,500 62,000
(39.1) P 19,100 19,200 19,300 19,500
A 32.7 32.8 33 33.3
M 279 319 363 425
E 2.1 2.4 2.7 3.2
% 69.3 72.1 74.2 75.6
56 C 35,500 43,000 49,500 57,000 67,000
(35) P 17,000 17,100 17,300 17,400 17,600
A 29.5 29.7 29.8 30.1 30.4
M 238 283 323 367 428
E 2.1 2.5 2.9 3.3 3.8
% 68.9 72.6 74.8 76.1 76.3
51 C 31,500 38,500 46,000 53,000 61,000 71,500
Condensing Temperature °C
(Sat. Dew Pt. Pressure, bar)

(31.2) P 15,100 15,300 15,400 15,600 15,700 16,000

A 26.7 26.9 27.1 27.3 27.6 28
M 200 240 286 326 370 430
E 2.1 2.5 3 3.4 3.9 4.5
% 67.9 72.1 75.1 76.4 76.7 75.4
46 C 28,700 34,000 41,000 49,500 56,500 64,500 76,000
(27.8) P 13,500 13,600 13,800 13,900 14,100 14,300 14,700
A 24.3 24.4 24.7 24.9 25.2 25.5 26
M 174 203 243 288 328 372 432
E 2.1 2.5 3 3.5 4 4.5 5.2
% 67.3 70.9 74.4 76.4 76.8 75.9 72.8
41 C 24,700 30,500 36,000 43,500 52,000 60,000 68,000 80,000
(24.7) P 12,000 12,100 12,300 12,400 12,600 12,800 13,100 13,500
A 22.2 22.4 22.5 22.8 23 23.3 23.7 24.3
M 144 176 205 245 290 330 373 433
E 2.1 2.5 2.9 3.5 4.1 4.7 5.2 5.9
% 65 70 73.1 75.6 76.4 75.5 73.2 68.1
36 C 21,900 26,300 32,500 38,000 46,000 55,000 63,000 71,500 83,500
(21.8) P 10,700 10,800 11,000 11,100 11,300 11,500 11,700 12,000 12,500
A 20.4 20.6 20.7 20.9 21.2 21.5 21.8 22.2 22.9
M 122.5 146 178 206 246 291 330 374 433
E 2.1 2.4 3 3.4 4.1 4.8 5.4 6 6.7
% 63.4 67.7 71.9 74.3 75.5 74.7 72.4 68.4 61.1
32 C 23,000 27,500 34,000 39,500 47,500 57,000 65,000 74,000 86,500
(19.8) P 9,800 9,950 10,100 10,300 10,400 10,700 10,900 11,300 11,700
A 19.3 19.4 19.6 19.8 20.1 20.4 20.8 21.3 22
M 124.5 147 179 207 247 291 331 374 433
E 2.3 2.8 3.4 3.9 4.6 5.3 6 6.6 7.4
% 65.6 69.3 72.8 74.3 74.5 72.3 68.6 63.2 54
27 C 24,500 29,100 35,500 41,500 50,000 59,500 67,500 77,000 90,000
(17.4) P 8,900 9,000 9,150 9,300 9,500 9,800 10,100 10,400 10,900
A 18.1 18.2 18.4 18.6 18.9 19.3 19.7 20.2 21
M 126 149 180 208 247 291 330 373 431
E 2.8 3.2 3.9 4.5 5.2 6.1 6.7 7.4 8.2
% 67.8 70.8 73 73.4 71.8 67.5 62 54.7 43.1
C: Capacity (W), P: Power (W), A: Current (Amps), M: Mass Flow (gm/s), E: COP (W/W), %: Isentropic Efficiency (%)
 Unit ID: 2098-24-00-003
TECHNICAL DATA
Date 04/09/2024 Rev. Date 04/09/2024
Project ID 2098 Tracking Number 24-0524-DXAH
Project Name Dreem Factory – Face lift
AHU Name AHU-03 - (1 QTY) HVACCALC V. 2.2.3.32
20/08/2024

AHU Model GHX 825A DCM 1/4

RIGHT VIEW

TOP VIEW
GENERAL SPECIFICATIONS
Air Flow Model / Frame

GHX (Green Horizontal DX Units)

11 m³/s / ANODIZED OMEGA 50
Insulation Material Total Weight

50 mm injected Polyurethane 45
kg/m³ 2,079 kg
Coil Air Velocity Air Density Outside Sheet Material Base Height
1.2101 kg/m³ 1.3 mm Electrostatic Prepainted
2.4 m/s Galvanized Steel Sh. 130 mm
Inside Sheet Material Motor Power
1 mm Galvanized Steel Sh.M.ZS 18.5 kW
Total Cooling Capacity Total Sensible Capacity

175 kW 139.13 kW

www.deltadcm.com Office Tel: 02224153392 Factory Tel: 02224153406

[email protected] Office Fax: 02224153406

Designer: MOATAZ HASSAN 04.09.2024

HVAC Calculator
 Unit ID: 2098-24-00-003
TECHNICAL DATA
Date 04/09/2024 Rev. Date 04/09/2024
Project ID 2098 Tracking Number 24-0524-DXAH
Project Name Dreem Factory – Face lift
AHU Name AHU-03 - (1 QTY) HVACCALC V. 2.2.3.32
20/08/2024

AHU Model GHX 825A DCM 2/4

SOUND PRESSURE LEVEL (dB) [Distance = 3 m]
Frequency Hz 63 125 250 500 1000 2000 4000 8000 LwA-tot
Airborne Sound Pressure Level 50.3 49.0 39.4 33.2 26.7 19.5 11.7 1.7 37.5 dBA
Air Outlet Induct Sound Pressure Level 69.3 68.0 66.4 64.2 60.7 53.5 48.7 43.7 65.7 dBA
Air Inlet Induct Sound Pressure Level 51.4 52.5 49.9 42.9 41.2 40.3 36.2 32.0 47.9 dBA
ACCESSORIES
Bulk Head Light,Sight Glass,On-Off Switch,Flexible Connector

SUPPLY CONNECTION
Connection Type Control Type Pressure Drop
Flange 0 Pa
Air Flow Dimensions Air Velocity
11 m³/s W 1,130 mm x H 1,130 mm 8.61 m/s
MIXING MODULE WITH TWO DAMPERS (M1)
Connection Type Condensation Pan Pressure Drop Section Weight

Gear Damper 57 Pa 336 kg

Fresh Air Control Type Return Air Control Type
Manual Manual
Fresh Air Volume Return Air Volume
0.4 m³/s 10.6 m³/s
Fresh Air Dimensions Return Air Dimensions
W 350 mm x H 300 mm W 1,750 mm x H 1,600 mm
Fresh Air Velocity Return Air Velocity

3.81 m/s 3.79 m/s

Fresh Air Capacity Return Air Capacity

50 % 50 %
DOORS (M1)
ID Type Handle Type Size Position Hinge Position Alignment Opposing Door

1 Standard (Handle + Hinge) With Lock 525 mm x 1,400 mm Right Left Right
ACCESSORIES (M1)

FILTER (M2)
Air Flow Condensation Pan Slide Type Hygienic Spare Filter Section Weight
11 m³/s None 281.1 kg
Filter Type

G4 Panel
Initial / Final / Design P.Drop Air Velocity Size/Quantity Size/Quantity Size/Quantity Size/Quantity
64 Pa / 150 Pa / 107 Pa 2.33 m/s 292x592x48/3 592x592x48/12
Filter Type

F9 Bag
Initial / Final / Design P.Drop Air Velocity Size/Quantity Size/Quantity Size/Quantity Size/Quantity
164 Pa / 250 Pa / 207 Pa 2.33 m/s 592x592x600/12 292x592x600/3
* Frame sealing applied.

www.deltadcm.com Office Tel: 02224153392 Factory Tel: 02224153406

[email protected] Office Fax: 02224153406

Designer: MOATAZ HASSAN 04.09.2024

HVAC Calculator
 Unit ID: 2098-24-00-003
TECHNICAL DATA
Date 04/09/2024 Rev. Date 04/09/2024
Project ID 2098 Tracking Number 24-0524-DXAH
Project Name Dreem Factory – Face lift
AHU Name AHU-03 - (1 QTY) HVACCALC V. 2.2.3.32
20/08/2024

AHU Model GHX 825A DCM 3/4

ACCESSORIES (M2)

COIL (DX) (Wet Surface) (M3)

Air Flow Capacity / Sensible Required Capacity Face Velocity Pitch Quantity Section Weight
11 m³/s 175/139.13 kW 2.4 m/s 2.5 1 376 kg
Coil Code Tube Material Fin Material Function
25 x 22 3/8 72T 4R 2505A 2.5P Copper Aluminium Cooling
Droplet Elimin. / Press. Drop Condensation Pan / Hmin U-Trap Tube Thickness Fin Thickness Mixing Ratio
AISI 316 (31.75 mm (ød)) 0.35 mm 0.11 mm 0%
(Connection:Right) Size (W x H x L) mm Conn. Material Frame Material
(Pressure:Negative) / 110.9
mm 2,505x 1,829 x 156 Copper Galvanized Steel
Fluid Kind Evaporation/Condensation/SCD/OH
R410A 7.4/53.5/8.3/8.3 °C
Air Inlet Drybulb Temperature Air Outlet Drybulb Temperature
24 °C 13.7 °C
Air Inlet Wetbulb Temperature Air Outlet Wetbulb Temperature
17.2 °C 12.2 °C
Air Inlet Relative Humidity Air Outlet Relative Humidity
51.06 % 84.42 %
Air Inlet - Outlet Enthalpy Fluid Flow / Vol. Flow
48.53 - 34.57 kJ/kg 4,056 kg/h / 3,004 L/min
Air Press.Drop(Wet/Dry) Fluid Press.Drop / Fluid Velocity
66 Pa / 61 Pa 47.70 kPa / 0.32 m/s
Coil Surface Area Tube Inner Volume
320 m² 57.21 L
Manifold / Conn.QTY Conn.Direction
4/4 Right
Connection Sizes Air Condensation Hygienic Blygold

7/8'' - 1 5/8'' 46.0167 l/h

ACCESSORIES (M3)

www.deltadcm.com Office Tel: 02224153392 Factory Tel: 02224153406

[email protected] Office Fax: 02224153406

Designer: MOATAZ HASSAN 04.09.2024

HVAC Calculator
 Unit ID: 2098-24-00-003
TECHNICAL DATA
Date 04/09/2024 Rev. Date 04/09/2024
Project ID 2098 Tracking Number 24-0524-DXAH
Project Name Dreem Factory – Face lift
AHU Name AHU-03 - (1 QTY) HVACCALC V. 2.2.3.32
20/08/2024

AHU Model GHX 825A DCM 4/4

SUPPLY FAN (M4)
Air Flow Motor Type Fan Model Quantity Section Weight
11 m³/s AC RDH 900 K 1 1,086 kg
Internal Static Pressure Motor P./Pha./Volt./Freq. Isolator Isolator Count
437 Pa 18.5 kW/3P/380V/50V-Hz SMA Spring 6
External Static Pressure Motor Speed Backup Fan Backup Motor Backup Inverter
650 Pa 1500 (1460)rpm 0 0 0
Total Static Pressure
1,087 Pa
Total Pressure
1,132 Pa
Total / Static Efficiency
81.95 / 81.95 %

Shaft Power
15.2 kW
Fan Speed Running Frequency
921 rpm (Max. 1100 rpm) 50.00 Hz
Fan Outlet Air Velocity Air Density
8.61 m/s 1.2264 kg/m³

Sound Power Level (dB)

Hz 63 125 250 500 1000 2000 4000 8000 LwA-tot
Outlet Side 95.1 93.9 92.2 90.0 86.5 79.3 74.5 69.5 91.5 dBA
Inlet Side 93.2 94.3 91.8 84.7 83.0 78.1 74.0 69.8 88.8 dBA
* The fan system effect is taken into account in the fan performance
* The fan calculated for wet conditions
DOORS (M4)
ID Type Handle Type Size Position Hinge Position Alignment Opposing Door

1 Standard (Handle + Hinge) With Lock 525 mm x 1,400 mm Right Left Left
ACCESSORIES (M4)
Bulk Head Light,Sight Glass,On-Off Switch,Flexible Connector

www.deltadcm.com Office Tel: 02224153392 Factory Tel: 02224153406

[email protected] Office Fax: 02224153406

Designer: MOATAZ HASSAN 04.09.2024

HVAC Calculator
 PROJECT:

Dreem Factory – Face lift

PRODUCT : CONDENSING UNITS

TYPE : AIR COOLED - AXIAL FANS
ITEM : CU-03
MODEL : PAS-6006 SCX
QT'Y. : 1#

DCM CONDENSING UNITS MANUFACTURED IN EGYPT BY:

DELTA CONSTRUCTION & MANUFACTURING CO.
 CONDENSING UNIT TECHNICAL DATA SHEET Wednesday, September 4, 2024

Project Customer
Dreem Factory – Face lift
Model Ref
PAS-6006 SCX CU-03
Capacity (Btu/hr) Capacity (KW) Ambient Temperature (°C) Air Oulet Temp. (°C)
600,000 175.00 40.0 49.3
PERFORMANCE & Power Input (hp) Power Input (KW) EER (
BTU/HR
/W) COP
INPUT DATA 78.83 58.83 10.20 2.97
Weight (kg) Capacity Control (%) Main Power
1400 0 - 25 - 50 - 75 - 100 380/3/50
Type Flow Rate (CMH) Piping (Liquid/Gas)
Multi-pass cross finned tube 78,880 (7/8 - 1 3/8) Ø
CONDENSER Fan Type Q'TY x Motor Power (hp)
Axial fan 8 x 1.0
Type Q'TY x Power Intput (hp) Lubricant type
Hermetic Scroll 4 X 17.7 POE Oil
COMPRESSOR RLA (Amp) LRA (Amp) Comp. Model No. Of Circuits
34 174 ZP 182KCE 4
Refrigerant Evaporating Temp. (°C) Suction Temp. (°C) Condensing Temp. (°C)
R-410A 7.4 7.2 53.5
REFRIGERANT Subcooling (K) Superheat (K) Charge (kg)
8.3 8.3 4 x 12.1
High Pressure Switch Low Pressure Switch Filter Driers Hot Gas By Pass
SAFETY DEVICE &
Internal Overload External Overload Magnetic Contactor Shutt Off Valve
ACCESSORY Temperature Controller Expansion Valve Phase Failur Devise Control Switch
 9/4/2024

AHU-03-GHX 825A - PAS 6006 SCX - 4 Circuits

Simulation Outputs

Outlet Air: 49.3 °C DB

Pressure: 3205 kPa Pressure: 3225 kPa

Condenser
Temperature: 45.1 °C Temperature: 83.8 °C
Saturation Temp: 53.5 °C Saturation Temp: 53.7 °C
Enthalpy: 122.2 kJ/kg Enthalpy: 322.2 kJ/kg
Subcooling: 8.3 K

Inlet Air: 40.0 °C DB / 25.5 °C WB

Pressure: 3202 kPa Air Flow Rate: 328.5 m³/min Pressure: 3226 kPa
Temperature: 45.0 °C Temperature: 84.6 °C
Saturation Temp: 53.4 °C Saturation Temp: 53.7 °C
Subcooling: 8.4 K COOLING MODE Enthalpy: 323.3 kJ/kg

System Capacity: 43.75 kW

Compressor Power: 13,208 W
Condenser Fan Power: 1500 W
Total Power: 14,708 W Compressor
COP: 2.97
Flow Sensible Heat Ratio: 0.795
Control Copeland Compressor: ZP182KCE-TFD
Refrigerant: R-410A
Refrigerant Charge: 12.05 kg
Pressure: 895 kPa
Temperature: 15.6 °C
Saturation Temp: 7.2 °C
Enthalpy: 281.0 kJ/kg
Outlet Air: 13.7 °C DB / 12.2 °C WB Superheat: 8.3 K

Pressure: 914 kPa Evaporator Pressure: 900 kPa

Temperature: 7.9 °C Temperature: 15.6 °C
Enthalpy: 122.0 kJ/kg Saturation Temp: 7.4 °C
Ref. Flow Rate: 1013.9 kg/hr Enthalpy: 280.8 kJ/kg
Superheat: 8.2 K

Inlet Air: 24.0 °C DB / 17.2 °C WB

Air Flow Rate: 165.0 m³/min
 AIR CONDITIONING ZP182KCE-TFD
HFC-410A
COPELAND SCROLL®
TFD 380/420-3-50

Evaporating Temperature °C (Sat. Dew Pt. Pressure, bar)

-23(3.6) -19(4.1) -14(5) -10(5.7) -5(6.8) 0(8) 4(9) 8(10.2) 13(11.8)

61 C 30,000 35,000 40,500 48,000
(39.1) P 15,400 15,500 15,500 15,500
A 29.3 29.3 29.4 29.4
M 212 244 278 326
E 2 2.3 2.6 3.1
% 65.2 68.4 70.9 73
56 C 27,300 33,000 38,000 44,000 52,000
(35) P 13,800 13,800 13,900 13,900 14,000
A 26.7 26.8 26.9 27 27
M 182 217 249 283 331
E 2 2.4 2.8 3.2 3.7
% 65.1 69.3 71.7 73.4 74.4
51 C 24,300 29,700 36,000 41,000 47,500 56,000
Condensing Temperature °C
(Sat. Dew Pt. Pressure, bar)

(31.2) P 12,300 12,300 12,400 12,500 12,600 12,700

A 24.5 24.6 24.7 24.8 24.9 25.1
M 154 186 221 252 287 336
E 2 2.4 2.9 3.3 3.8 4.4
% 64.3 69.1 72.3 73.9 74.7 74.5
46 C 22,100 26,300 32,000 38,500 44,000 50,500 59,500
(27.8) P 10,900 11,000 11,100 11,200 11,300 11,400 11,500
A 22.6 22.7 22.9 23 23.1 23.2 23.4
M 134 157 189 224 255 290 339
E 2 2.4 2.9 3.4 3.9 4.4 5.2
% 63.8 68.1 71.8 74 74.7 74.5 72.9
41 C 18,900 23,800 28,000 34,000 40,500 46,500 53,500 63,000
(24.7) P 9,750 9,800 9,900 10,000 10,100 10,200 10,300 10,400
A 20.9 21.1 21.2 21.4 21.5 21.7 21.8 21.9
M 109.5 137 159 191 226 257 292 343
E 1.9 2.4 2.8 3.4 4 4.6 5.2 6.1
% 61.1 67.3 70.6 73.2 74.3 74 72.8 69.6
36 C 16,600 20,300 25,300 29,700 36,000 43,000 49,000 56,500 67,000
(21.8) P 8,700 8,750 8,850 8,950 9,050 9,150 9,250 9,350 9,450
A 19.5 19.7 19.9 20 20.1 20.3 20.4 20.5 20.7
M 93 112.5 138 161 192 227 259 295 346
E 1.9 2.3 2.9 3.3 4 4.7 5.3 6 7.1
% 59 64.7 69.5 71.9 73.3 73.2 71.8 69.3 64.3
32 C 17,700 21,400 26,400 31,000 37,000 44,500 51,000 59,000 69,500
(19.8) P 7,950 8,050 8,150 8,250 8,350 8,450 8,550 8,650 8,700
A 18.7 18.8 19 19.1 19.3 19.4 19.5 19.6 19.7
M 95.5 114.5 140 162 193 228 260 297 349
E 2.2 2.7 3.2 3.8 4.5 5.3 6 6.8 8
% 62 66.7 70.5 72.2 72.6 71.4 69.1 65.4 58.7
27 C 18,900 22,700 27,800 32,500 39,000 46,500 54,000 62,000 73,500
(17.4) P 7,150 7,250 7,350 7,450 7,550 7,650 7,700 7,750 7,800
A 17.8 17.9 18.1 18.1 18.3 18.4 18.4 18.5 18.6
M 98 116 141 163 194 230 262 299 352
E 2.6 3.1 3.8 4.4 5.2 6.1 7 8 9.4
% 65 68.5 71 71.6 70.8 68 64.2 58.8 49.3
C: Capacity (W), P: Power (W), A: Current (Amps), M: Mass Flow (gm/s), E: COP (W/W), %: Isentropic Efficiency (%)
 RECOMMENDED DATA OF MOTOR OF DCM AHU
KW HP FLA Hz PHASE Connection Cable Size (Qt’Y*MM²)
0.75 1 1.88 50 3~ D.O.L 3*2
1.5 2 3.6 50 3~ D.O.L 3*2
2.2 3 4.7 50 3~ D.O.L 3*2
3 4 6.7 50 3~ D.O.L 3*3
4 5.5 8.1 50 3~ D.O.L 3*3
5.5 7.5 10.8 50 3~ D.O.L 3*4
7.5 10 15.1 50 3~ D.O.L 3*6
10 15 22.5 50 3~ S.D 6*6
15 20 29 50 3~ S.D 6*6
22 30 40 50 3~ S.D 6*10
30 40 55 50 3~ S.D 6*16
* In case of connecting D.O.L please connect the motor as shown on name plate
* The diameter of the wire was chosen at a length of 15 meters, and a maximum of that is to be
reviewed by the project electricity consultant.
* D.O.L Direct on Line Connection
* S.D Star Delta Connection

94 Al Nozha St. Helipolis - Cairo - Egypt

Tel. : (+20)2-224153392
Fax. : (+20)2-224153406
Web. Site: www.deltadcm.com
 selection was based on the condensing unit and motor of AHU only, without the heaters

ELECTRICAL DATA OF DCM CONDENSING UNIT

UNIT
MODEL POWER MCCB CABLE SIZE
VOLTS HZ A (Qt’Y*MM²)
PAS‐656 SCX 380 50 20 4x6
PAS‐906 SCX 380 50 25 4x10
PAS‐1006 SCX 380 50 30 4x10
PAS‐1206 SCX 380 50 50 4x10
PAS‐1406 SCX 380 50 50 4x10
PAS‐1806 SCX 380 50 50 4x16
PAS‐2006 SCX 380 50 60 4x16
PAS‐2406 SCX 380 50 100 4x25
PAS‐3006 SCX 380 50 100 4x25
PAS‐4006 SCX 2CIR 380 50 125 4x35
PAS‐4006 SCX 4CIR 380 50 125 4x35
PAS‐4806 SCX 380 50 180 4x50
PAS‐6006 SCX 380 50 200 4x50
PAS‐8006 SCX 380 50 225 4x70
PAS‐10006 SCX 380 50 300 4x70
PAS‐12006 SCX 380 50 400 4x95

94 Al Nozha St. Helipolis - Cairo - Egypt

Tel. : (+20)2-224153392
Fax. : (+20)2-224153406
Web. Site: www.deltadcm.com
 ELECTRICAL DATA OF DCM PACKAGE UNIT
UNIT
MODEL POWER MCCB CABLE SIZE
VOLTS HZ A (Qt’Y*MM)
PAS‐656 PUX 380 50 30 4x6
PAS‐906 PUX 380 50 40 4x10
PAS‐1006 PUX 380 50 40 4x10
PAS‐1206 PUX 380 50 50 4x10
PAS‐1406 PUX 380 50 40 4x10
PAS‐1806 PUX 380 50 60 4x16
PAS‐2006 PUX 380 50 70 4x25
PAS‐2406 PUX 380 50 80 4x25
PAS‐3006 PUX 380 50 120 4x35
PAS‐4006 PUX 2CIR 380 50 150 4x35
PAS‐4006 PUX 4CIR 380 50 140 4x35
PAS‐4806 PUX 380 50 150 4x50
PAS‐6006 PUX 380 50 225 4x70
PAS‐8006 PUX 380 50 280 4x70
PAS‐10006 PUX 380 50 350 4x95
PAS‐12006 PUX 380 50 400 4x95

94 Al Nozha St. Helipolis - Cairo - Egypt

Tel. : (+20)2-224153392
Fax. : (+20)2-224153406
Web. Site: www.deltadcm.com
 ELECTRICAL DATA OF DCM PACKAGE UNIT
UNIT
MODEL POWER MCCB CABLE SIZE
VOLTS HZ A (Qt’Y*MM)
PAS‐656 SCX/SU 380 50 30 4x6
PAS‐906 SCX/SU 380 50 40 4x10
PAS‐1006 SCX/SU 380 50 40 4x10
PAS‐1206 SCX/SU 380 50 50 4x10
PAS‐1406 SCX/SU 380 50 40 4x10
PAS‐1806 SCX/SU 380 50 60 4x16
PAS‐2006 SCX/SU 380 50 70 4x25
PAS‐2406 SCX/SU 380 50 80 4x25
PAS‐3006 SCX/SU 380 50 120 4x35
PAS‐4006 SCX/SU 2CIR 380 50 150 4x35
PAS‐4006 SCX/SU 4CIR 380 50 140 4x35
PAS‐4806 SCX/SU 380 50 150 4x50
PAS‐6006 SCX/SU 380 50 225 4x70
PAS‐8006 SCX/SU 380 50 280 4x70
PAS‐10006 SCX/SU 380 50 350 4x95
PAS‐12006 SCX/SU 380 50 400 4x95

94 Al Nozha St. Helipolis - Cairo - Egypt

Tel. : (+20)2-224153392
Fax. : (+20)2-224153406
Web. Site: www.deltadcm.com
 ELECTRICAL DATA OF DCM SPLIT UNIT
UNIT

MODEL POWER MCCB CABLE SIZE

VOLTS HZ A (Qt’Y*MM)
PAS‐656 SCX/AHU 380 50 30 4x6
PAS‐906 SCX/AHU 380 50 40 4x10
PAS‐1006 SCX/AHU 380 50 40 4x10
PAS‐1206 SCX/AHU 380 50 50 4x10
PAS‐1406 SCX/AHU 380 50 40 4x10
PAS‐1806 SCX/AHU 380 50 60 4x16
PAS‐2006 SCX/AHU 380 50 70 4x25
PAS‐2406 SCX/AHU 380 50 80 4x25
PAS‐3006 SCX/AHU 380 50 120 4x35
PAS‐4006 SCX/AHU 2CIR 380 50 150 4x35
PAS‐4006 SCX/AHU 4CIR 380 50 140 4x35
PAS‐4806 SCX/AHU 380 50 150 4x50
PAS‐6006 SCX/AHU 380 50 225 4x70
PAS‐8006 SCX/AHU 380 50 280 4x70
PAS‐10006 SCX/AHU 380 50 350 4x95
PAS‐12006 SCX/AHU 380 50 400 4x95

94 Al Nozha St. Helipolis - Cairo - Egypt

Tel. : (+20)2-224153392
Fax. : (+20)2-224153406
Web. Site: www.deltadcm.com
 STANDARD PIPNG SIZE AND PIPING LENGTH FOR DCM CONDENSING UNITS (R410a)
NO. Equivalent Piping Length (METER)
MODELS CONNECTION
CIRCUITS 5 10 15 20 25 30 40
GAS (⅞)" (1⅛)"
PAS‐506SCX 1
LIQUID (⅝)" (⅝)"
GAS (⅞)" (1⅛)" (1⅜)"
PAS‐656SCX 1
LIQUID (⅝)"
GAS (1⅛)" (1⅜)"
PAS‐906SCX 1
LIQUID (⅝)" (⅞)"
GAS (1⅛)" (1⅜)"
PA‐1006SCX 1
LIQUID (⅝)" (⅞)"
GAS (1⅛)" (1⅜)"
PA‐1206SCX 1
LIQUID (⅝)" (⅞)"
GAS (⅞)" (1⅛)" (1⅜)"
PA‐1406SCX 2
LIQUID (⅝)"
GAS (1⅛)" (1⅜)"
PAS‐1806SCX 2
LIQUID (⅝)" (⅞)"
GAS (1⅛)" (1⅜)"
PA‐2006SCX 2
LIQUID (⅝)" (⅞)"
GAS (1⅛)" (1⅜)"
PA‐2406SCX 2
LIQUID (⅝)" (⅞)"
GAS (1⅜)" (1⅝)"
PAS‐3006SCX 2
LIQUID (⅞)"
GAS (1⅝)" (2⅛)"
PA‐4006SCX 2
LIQUID (⅞)" (1⅛)"
GAS (1⅛)" (1⅜)"
PA‐4806SCX 4
LIQUID (⅝)" (⅞)"
GAS (1⅜)" (1⅝)"
PAS‐6006SCX 4
LIQUID (⅞)"
GAS (1⅝)" (2⅛)"
PAS‐8006SCX 4
LIQUID (⅞)" (1⅛)"
GAS (1⅝)" (2⅛)"
PAS‐10006SCX 4
LIQUID (⅞)" (1⅛)"
GAS (2⅛)"
PAS‐12006SCX 4
LIQUID (1⅛)" (1⅜)"
 DR - SERIE

Digital Room
Thermostats
INSTALLATION MANUAL

APPLICATION
DR is a serie of Digital Room Thermostats, provides a single stage, temperature control. Table 1 shows all the
available models. All models can be provided with 24, 120, 220 Vac.

Model Operation Cooling / Heating Compressor delay

01 cool + sweep Compressor yes
02 cool + sweep Chilled water no
03 cool – fan – dry Compressor yes
04 cool – fan – dry Chilled water no
05 cool – fan – dry – heat – auto Compressor / Heat pump yes
06 cool – fan – dry – heat – auto Compressor / Electric heater yes, only for cool
07 cool – fan – dry – heat – auto Hot / Chilled water no

Table 1. Serie of Digital Room Thermostats.

These thermostats are mercury free and require no battery. All set points are kept permanently by
non-volatile memory.

Fig. 1. Digital Room Thermostat.

Model No. Legend

When ordered, put all the information in the Model No. Legend.

Voltage supply : 24, 120, 220 Vac.

1
 DR - SERIE

SPECIFICATIONS

POWER SUPPLY
24 VAC system 18 – 30 VAC, 50/60 Hz
120 VAC system 96 – 144 VAC, 50/60 Hz
220 VAC system 198 – 250 VAC, 50/60 Hz

TEMPERATURE :
Temperature accuracy ± 1 °C
Storage temperature 0 – 70 °C
Ambient temperature 10 – 50 °C
Setting temperature range 18 – 30 °C (64 – 88 °F)

HEAT and COOL RELAY : ( P1, P2)

Rating (resistive load)
• Maximum switching capacity 3 A 277 VAC

FAN RELAY: (P3, P4, P5)

Rating (resistive load)
• Maximum switching capacity 2 A 277 VAC
3 A 125 VAC

INSTALLATION
Read these instructions thoroughly before installing product. Failure to follow these instructions could
damage the product or cause a hazardous condition. Check the voltage and current ratings on the
product to ensure that it is suitable for your application. Installer must be a trained, experienced
service technician. Check product for proper operation after installation.

CAUTION

Damage to heating and cooling system may occur. Disconnect power from the equipment at the main
breaker/fuse block while installing the thermostat.

Mounting Location
Mount the thermostat approximately 5 ft. (1.5m) above the floor in a location that is free from direct
sunlight, heat from appliances, hot or cold air from ducts, concealed pipes and chimneys, and drafts or
dead spots behind doors or in corners. Do not mount on exterior wall, if possible. Failure to locate
thermostat mounting as indicated will result in poor temperature control.

Note : Level thermostat mounting is for appearance only and is not required for proper thermostat operation.

2
 DR - SERIE

Mount and Wire the Thermostat

Tighten two appropriately sized screws on Use cable size 0.5-1 sq. mm connect the wires from
the wall or on the 2x4 in. junction box. heating /cooling equipment to the terminals on the
Keeping 1.50 mm distance from the wall. See thermostat. See wiring diagram (Fig. 8 & 9) for
Fig. 2. location of thermostat terminals.

Fig. 2. Tighten screws on the wall. Fig. 5. Connect system wires to

thermostat terminals (strip 5/6 inch).

Mount the thermostat on the wall by having it on Put the cover back. See Fig. 6.
the screws. See Fig. 3.

Fig. 3. Mount the thermostat. Fig. 6. Put the cover back.

Lift and open the cover, pull it up to remove. Tighten screw to secure the cover. See Fig. 7.
See Fig. 4.

Fig. 4. Remove the cover. Fig. 7. Tighten the screw.

3
 DR - SERIE

WIRING DIAGRAM

Fig. 8. For 120 or 220 Vac system.

Fig. 9. For 24 Vac system.

4
 DR - SERIE

SET UP
All thermostats are factory set up according to the Model No. Legend listed on the back side of the plastic
casing. However it can be alternated by the programming.

WARNING

Failure to set up according to the application may damage the heating and cooling system.

Set up mode
Press and hold TEMP & and TEMP ³ and FAN buttons at the same time for 3 seconds, the display will
show the existing set up as per Table 2.

Display Not blinking Blinking

P1 Heat /Cool Cool
P2 Electric heater No electric heater
P3 °F °C
P4 No compressor delay Compressor delay
P5 Sweep No sweep
P6 Wireless Wire

Table 2. Set up table.

Note : P6 is not used in this serie.

Example 1 : the display shows P1 without blinking means the set up is now for Heat / Cool version.

Change the set up

a) While in set up mode, press TEMP & or TEMP ³ button to the required set up program.
b) To change the set up to the other version as listed in Table 2, press FAN button.
c) Repeat (a) & (b) for the next set up.
d) Press MODE or SWEEP button to exit from the set up mode.

Note : If POWER button is pressed before exiting from the set up mode (Section d above), the system
will exit from the existing mode without changing the setup program.

OPERATION
Power
Press POWER to turn on/off the air conditioner. When turn on, it will operate according to the last program
setting.

Mode/Sweep

For Cool + Sweep version, button is a SWEEP button used to turn on/off the sweep motor.
For other versions, this is a MODE button used to select the operation mode.

Cool only model. Heat/Cool mode.

5
 DR - SERIE

S Cool Mode : LED at will show in blinking for 5 seconds

S Dry Mode : LED at will show in blinking for 5 seconds

S Fan Mode : LED at will show in blinking for 5 seconds

S Heat Mode : LED at will show

‰ in blinking for 5 seconds if the Heat Pump version is ordered.

‰ in blinking for 5 seconds if the Electric Heater version is ordered.
‰ in blinking for 5 seconds if the Hot water pipe version is ordered.
S Auto Mode : LED at will show in blinking for 5 seconds. The system will automatically
switch from Cool to Heat mode or vice versa.

Fan
Press FAN button to select the fan speed in the following sequence.

LED at will show the status of the fan.

Auto mode
The speed will be adjusted according to the difference between the room and the setting temperature.
S If the difference is 3°C or more, the fan will run at high speed.
S If the difference is 2°C, the fan will run at medium speed.
S If the difference is 1°C, or lower, the fan will run at low speed.

Temperature setting
Press TEMP & or TEMP ³ button for setting the temperature in a range of 18 - 30°C or 64 - 88 °F.
LED at will show the new setting for 5 seconds.

Compressor delay
In a model with compressor delay feature, there will be 3 minute time delay before the compressor can
restart.

Compressor status
LED at shows the status of the compressor/valve/heater.

Sensor Error Alarm

If the room sensor is open/short circuit, the controller will stop the compressor or any heating equipment and
dot on 7-segment will blink.

Auto Restart
All the setting parameters are kept in the non volatile memory. When there is a power failure and back to
normal, the system will resume its operation with the same setting parameters.

P/N 170063-006E (REV.01) 6