MA1503-EA © 2015 CASIO COMPUTER CO., LTD.

Operation Guide 5427

Basic Operations Indicators and Displays Navigating Between Modes
This section provides an overview of the watch Your watch has the modes shown below.
and explains operations that are common to Bluetooth connection

all modes.

Note

● The illustrations included in this

operation guide have been created
to facilitate explanation. An (Approximately
0.5 seconds)
illustration may differ somewhat
A DST indicator
from the item it represents.
Appears when the indicated time is summer Timekeeping Mode
time.

B Airplane indicator
General Guide Indicates the watch is in the Airplane Mode.
Communication with a phone is disabled.

C PM indicator
Appears when the time in the dot display is a
p.m. time. Alarm Mode Stopwatch Mode

D AM/PM indicator
Indicates whether the small hour and minute
hands are showing an a.m. time [A] or p.m.
time [P].
A Hour hand Timer Mode
E Alarm indicator
B Digital display Appears when an alarm is turned on.

C Minute hand F Hand shift indicator

Flashes while the hands are shifted.
D Small hour hand
G e mark Use (D) to navigate between modes. Hold
E Small minute hand When the watch is connected with a phone, down (D) for about two seconds to enter the
the second hand points to e. Timekeeping Mode. To connect with a phone,
F Dot display
hold down (C) for about 0.5 seconds.
H OFF mark
G Second hand
When the watch is in the Alarm Mode and the Important!
alarm is disabled, the second hand points to
“OFF”. ● (C) is not a crown, so you should not
pull on it. It is a button that you
I ON mark
operate by pressing it. Forcibly
When the watch is in the Alarm Mode and the
pulling on (C) can cause damage to
alarm is enabled, the second hand points to
and malfunction of the watch.
“ON”.

J R mark
When the watch is standing by for connection
with a phone, the second hand points to “R”.

1
 Operation Guide 5427
Selecting a Timekeeping Shifting the Hands Solar Charging
Mode Digital Display Format
Hour and minute hand shift moves the hands What is solar charging?
In the Timekeeping Mode, you can use the for easy viewing of display info.
This watch runs on power supplied from a
operation below to change the contents of the
1. To shift the hour and minute hands, hold rechargeable (secondary) battery that is
digital displays.
down (B) as you press (D). charged by a solar panel. The solar panel is
Day Seconds ● This will cause the hour and minute integrated into the face of the watch, and
hands to move to a position where they power is generated whenever the face is
do not block the digital display. exposed to light.
● The hand shift indicator flashes while
Charging the Watch
the hands are shifted.
Day of the week Hour Example: When you are not wearing the watch, put it in
a location where it is exposed to bright light.
Minute Shifting the hands when it is 10:35

Note

● Pressing (E) will cause the currently

selected Home Time City to appear
in the dot display. After a few Hand shift indicator
seconds, the display will return to its
While you are wearing the watch, make sure
normal information.
2. To return the hands to their normal that its face (solar panel) is not blocked from
positions, hold down (B) as you press the light by the sleeve of your clothing. Power
(D) again. generation efficiency is reduced even when
the face of the watch is blocked only partially.
Note
YES NO
● This function can be used in any
Home Time City mode.
● While hands are shifted, watch
● When the watch connects with a
button operations are the same as
phone by Mobile Link, Home Time
when hands are unshifted.
City information is obtained from the
phone. Such information is indicated ● Changing to another mode returns
by a diamond mark (¿) to the left of the hands to their normal positions. Important!
the city name. ● Shifted hands will return to their
normal positions if no button ● Depending on light intensity and
operation is performed for one hour. local conditions, the watch may
become hot to the touch when
● In all modes, hands shift
exposed to light for charging. Take
automatically while settings are
care to avoid burn injury after
being configured. They move back
charging. Also, avoid charging the
to their normal positions after
watch under high-temperature
settings are complete.
conditions like the ones described
below.
ー On the dashboard of a vehicle

parked in the sun

ー Near an incandescent light bulb or

other source of heat

ー Under direct sunlight or in other

hot areas for long periods

2
 Operation Guide 5427
Charging Times ● Low Battery Power
Using Mobile Link with
In the Timekeeping Mode, the second hand
The table below shows general guidelines for
charging times under various light sources. jumps at two-second intervals. Other watch a Mobile Phone
Actual charging time depends on your local functions operate normally. While there is a Bluetooth connection
environment. between the watch and phone, the watch time
setting is adjusted automatically in
Charge Level Charge Level
Light Intensity accordance with the phone’s time setting.
1 2
A 3 hours 35 hours Note
High
B 8 hours 130 hours
p
C 12 hours 208 hours Second hand
This function is available only while
Low
●

D 147 hours - CASIO WATCH+ is running on the

If power drops even further, all hands will
phone.
Charge Level 1: stopped at 12 o’clock and [CHG] will flash.
Time from dead battery until hand movement
● This section describes watch and
starts phone operations.
X : Watch operation
Charge Level 2:
Y : Phone operation
Time from hand movement starts until a full
charge

Light Intensity
● Dead Battery Getting Ready
A Sunny day, outdoors (50,000 lux) All hands are stopped at 12 o’clock and digital
displays are blank. A Installing required app on your
B Sunny day, near a window (10,000 lux)
phone
C Overcast day, near a window (5,000 lux) To use the watch with a phone, first tap one of
the links below and install the “CASIO WATCH
D Indoor fluorescent lighting (500 lux) +” app on the phone.

Note ● iOS (iPhone)

https://itunes.apple.com/us/app/
● Actual charging time depends on the Power Saving Function id760165998?ls=1&mt=8
local charging environment.
Leaving the watch in a dark location for about ● Android (GALAXY, etc.)
one hour between the hours of 10 p.m. and 6 https://play.google.com/store/apps/details?
Remaining Charge and Dead a.m. will cause the second hand to stop, and id=com.casio.watchplus
Battery the watch to enter Level 1 power saving. If the
watch is left in this condition for six or seven B Configuring Bluetooth settings
The charge level is indicated by watch hand days, all hands will stop at 12 o’clock and the
movement. Functions become disabled as watch will enter Level 2 power saving. Enable the phone’s Bluetooth.
battery power goes low.
Level 1: iPhone Users
Important! Second hand stops and digital displays go
blank to save power. 1. Y On the Home Screen, tap “Settings” n
● Should battery go low or go dead, “Bluetooth”.
Level 2:
expose the face (solar panel) to light
All hands stop moving, Bluetooth connection 2. Y Enable “Bluetooth”.
as soon as possible.
is terminated, alarms are turned off, and digital
3. Y Tap “Settings” to return to the “Settings”
displays go blank to save power.
screen.
Note ● Recovering from Power Saving
4. Y Tap in the following sequence:
Operation
“Privacy” n “Bluetooth Sharing”.
● While [R] is flashing, some functions Press any button or place the watch in a well-
are temporarily disabled to avoid lit area to recover from power saving. 5. Y Enable “CASIO WATCH+”.
running down the battery.
Note

You can enable or disable Power

●

Saving.
l Configuring Power Saving Function
Settings

3
 Operation Guide 5427
Android Users ● Setting the Auto Adjust Time
Auto Time Adjustment
Y Enable Bluetooth. Use CASIO WATCH+ on the phone to set the
The watch can be set to adjust its time setting auto adjust time.
● If you are presented with a choice between automatically each day in accordance with the
“Bluetooth” and “Bluetooth Smart”, select phone time. 1. Y On the Home Screen, tap the “CASIO
“Bluetooth Smart”. WATCH+” icon.
● Using Auto Adjust
This displays “Searching for watch...”.
Note Schedule auto adjust for times the watch and
phone are normally close to each other as 2. X Hold down (C) for about 0.5 seconds
shown in the illustration below. until the second hand points to the R mark.
● For details about setting
● While you sleep at night The second hand will move to e when a
procedures, see your phone connection is established between the
documentation. watch and phone.

C Pairing the watch with a phone

Before you can use the watch in combination
with a phone, you first need to pair them. Once
the watch is paired with a phone, you normally
22:00
do not need to pair them again. 3. Y Tap in the following sequence: f n
“Watch settings”.
1. Move the phone you want to pair with
close to (within one meter of) the watch. ● While you work at your desk in the afternoon 4. Y Tap “Time adjustment”.
● Perform the operation shown on the
2. Y On the Home Screen, tap the “CASIO phone screen.
WATCH+” icon.
Note
3. Y Select “ECB-500” and then tap “Next”.

4. Y Perform operations as instructed by the ● Actual adjustment of the watch time

setting will occur about 30 seconds
app.
after the auto adjust time.
● If a pairing prompt message appears, 14:00 Example: When 22:00 is set as the
perform the operation shown on the auto adjust time, watch time setting
phone screen. adjustment will start 30 seconds
after 22:00.
● When paring is complete, the second
hand will move to e to indicate Important!
connection.
● Even if there is no Bluetooth
connection when the auto adjust
time is reached, a connection is
established and adjustment is
performed automatically. The
connection is automatically
terminated after time adjustment is
complete.
5. Y Tap “Start”.
This displays the CASIO WATCH+ top
screen. Note

Note
● The watch’s Home Time City is also
changed to the city set on the phone.
● World Time times are also
● If pairing fails for some reason,
automatically adjusted.
perform the procedure again from
step 2.

4
 Operation Guide 5427
● Triggering Immediate Time Adjustment Specifying a World Time City Configuring the Summer Time
The watch will adjust its time setting to that of Setting
the phone immediately after they are 1. Y Tap the “CASIO WATCH+” icon.
connected with each other. Whenever you 1. Y Tap the “CASIO WATCH+” icon.
want to adjust the watch’s time setting perform 2. X Hold down (C) for about 0.5 seconds
the procedure below to connect with a phone. until the second hand points to the R mark. 2. X Hold down (C) for about 0.5 seconds
1. Y On the Home Screen, tap the “CASIO The second hand will move to e when a until the second hand points to the R mark.
WATCH+” icon. connection is established between the The second hand will move to e when a
This displays “Searching for watch...”. watch and phone. connection is established between the
watch and phone.
2. X Hold down (C) for about 0.5 seconds
until the second hand points to the R mark.
The second hand will move to e when a
connection is established between the
watch and phone, and the time setting of
the watch will adjust to the phone’s time
setting.
3. Y Tap “World time”.
3. Y Tap “World time”.
4. Y Specify a World Time City by inputting a
city name or by tapping its location on the 4. Y Specify a World Time City by inputting a
on-screen map. city name or by tapping its location on the
on-screen map.
5. Perform the operation shown on the
City name phone screen. The World Time setting will If your currently specified World Time City
be reflected on the watch. observes summer time, the summer time
period will appear on the display.
Note ● In the Timekeeping Mode, you can
check the World Time with the watch’s 5. Y Select the summer time switching
● If the watch’s current time was set by small hour hand and minute hand. method you want to use.
the CASIO WATCH+ app, there will ● “Auto”
be a diamond mark (¿) to the left of
World Time hour and minute

the time on the watch’s dot display. The watch switches between standard
time and summer time automatically.
● “OFF”
The watch always indicates standard
Configuring World Time time.
Settings ● “ON”
The watch always indicates summer
Features Note
time.
Specifying a World Time City with CASIO ● If the watch’s World Time was set by 6. Perform the operation shown on the
WATCH+ causes the city’s time to be the CASIO WATCH+ app, there will phone screen.
indicated by the small hour and minute hands. be a diamond mark (¿) to the left of
Watch settings can be configured for auto Note
the time on the watch’s dot display.
summer time switching for the World Time
City. ● When “Auto” is selected for
standard/summer time switching,
the watch will switch between
standard time and summer time
automatically. Do not need to
change the time setting manually for
changes between summer time and
standard time. Even if you are in an
area that does not observe summer
time, you can leave the watch’s
summertime setting as “Auto”.
● Changing the summer time setting
Note on the watch also will change the
CASIO WATCH+ summer time
● CASIO WATCH+ World Time lets setting.
you select from among ● A CASIO WATCH+ screen shows
approximately 300 cities as the
information about summer time
World Time City.
periods.

5
 Operation Guide 5427
Swapping Your Current Location Configuring Timer Settings Adjusting Hand Alignment
Time and World Time
If the hands are out of alignment even though
1. Y Tap the “CASIO WATCH+” icon. 1. Y Tap the “CASIO WATCH+” icon.
auto time adjustment is being performed, use
2. X Hold down (C) for about 0.5 seconds CASIO WATCH+ to adjust them.
2. X Hold down (C) for about 0.5 seconds
until the second hand points to the R mark. until the second hand points to the R mark.
1. Y Tap the “CASIO WATCH+” icon.
The second hand will move to e when a The second hand will move to e when a
connection is established between the 2. X Hold down (C) for about 0.5 seconds
connection is established between the
watch and phone. until the second hand points to the R mark.
watch and phone.
The second hand will move to e when a
connection is established between the
watch and phone.

3. Y Tap “World time”. 3. Y Tap “Timer”.

4. Y Tap “Home time k World time”. 4. Y Perform the operation shown on the
phone screen.
5. Perform the operation shown on the 3. Y Tap in the following sequence: f n
phone screen to swap your current “Watch settings”.
location time with the World Time.
Setting the Alarm 4. Y Tap “Adjusting home positions”.
● In the Timekeeping Mode, you can
check the World Time with the watch’s 5. Y Perform the operation shown on the
1. Y Tap the “CASIO WATCH+” icon. phone screen.
small hour hand and minute hand.
2. X Hold down (C) for about 0.5 seconds
Before swapping After swapping
until the second hand points to the R mark.
Phone Finder
Current location time Current location time The second hand will move to e when a
connection is established between the You can use phone finder to trigger a tone on
watch and phone. the phone to make it easy to find. The tone is
n forced to sound even if the phone is in the
manner mode.

Important!
World Time World Time

● Do not use this function in areas

where phone call tones are
Note 3. Y Tap “Alarm”.
restricted.
● This function comes in handy when
4. Y Perform the operation shown on the ● The tone sounds at a high volume.
you need to move to another time phone screen. Do not use this function when
zone. For details about how to use it, listening to phone output over
see “Moving to Another Time Zone”. earphones.

1. X If the watch is connected with a phone,

press (C) to terminate the connection.

Connected After disconnection

6
 Operation Guide 5427
Changing the Home Time Connecting with a Phone
2. X Hold down C for about three seconds
until [FIND] appears on the dot display. City Summer Time Setting This section explains how to establish a
Bluetooth connection between a phone that is
This will cause the watch’s second hand
paired with the watch.
to move to e and the phone will sound a 1. Y On the Home Screen, tap the “CASIO
WATCH+” icon.
● If the watch is not paired with the phone you
tone.
want to connect with, perform the procedure
● It will take a few seconds before the This displays “Searching for watch...”.
under “CPairing the watch with a phone” to
phone tone sounds.
2. X Hold down (C) for about 0.5 seconds pair them.
until the second hand points to the R mark.
1. Move the phone close to (within one meter
The second hand will move to e when a
of) the watch.
connection is established between the
watch and phone. 2. X While the second hand is not pointing to
e, hold down (C) for about 0.5 seconds
until the second hand moves to R.
3. X Press any button to stop the tone. The second hand will move to e, which
● You can press any watch button to stop indicates that Bluetooth connection is
the phone tone only during the first 30 complete. The home time city name will
seconds after it starts to sound. also appear.

3. Y Tap in the following sequence: f n

“Watch settings”.
Configuring Watch Settings
4. Y Tap “Summer time setting”.
You can use CASIO WATCH+ to specify the
5. Y Select the summer time switching
Bluetooth connection auto disconnect time,
method you want to use.
auto time adjustment timing and other
settings. ● “Auto” Important!
The watch switches between standard
1. Y Tap the “CASIO WATCH+” icon. time and summer time automatically. ● If you have problems establishing a
2. X Hold down (C) for about 0.5 seconds
● “OFF” connection, it could mean that
The watch always indicates standard CASIO WATCH+ is not running on
until the second hand points to the R mark.
time. the phone. On the phone’s home
The second hand will move to e when a
● “ON” screen, tap the “CASIO WATCH+”
connection is established between the
The watch always indicates summer icon. Then on the watch, hold down
watch and phone.
time. the (C) button for about 0.5 seconds.

6. Perform the operation shown on the

phone screen.
Note

● The connection will be terminated if

Connection you do not perform any operation on
3. Y Tap in the following sequence: f n the watch or phone for a fixed
“Watch settings”. Cancelling a Connection with a amount of time.
Phone To specify the connection limit time,
4. Y Select the setting you want to change perform the following operation with:
and then perform the operation shown on Connected After disconnection
use CASIO WATCH+ to select
the phone screen. “Watch settings” n “Connection
time”, and then specify a setting of 3
n minutes, 5 minutes, or 10 minutes.

Pressing (C) terminates the Bluetooth

connection and return the second hand to its
normal operation.

7
 Operation Guide 5427
Entering the Watch Airplane Mode ● Deleting Pairing Information from a If you purchase another phone
Phone
Use the Airplane Mode to disable Bluetooth You need to perform the operation below
radio wave emissions. whenever you want to establish a Bluetooth
iPhone Users
Enter the Airplane Mode when in a hospital, in connection with a phone that is different from
an aircraft, or anywhere else where radio wave the one you are currently connected with.
1. Y On the Home Screen, tap “Settings” n
emissions are restricted.
“Bluetooth”. 1. Unpairing
Important! 2. Y Tap g next to “CASIO ECB-500”. 2. Perform pairing again.
3. Y Tap “Forget this Device”.
● The functions below are disabled in Connecting a Different Watch to a
the Airplane Mode. This deletes the watch’s pairing Phone
ー Auto adjust information from the phone.
ー Phone finder
You should perform the steps below before
pairing a different watch with the phone, such
ー Bluetooth connection Android Users
as after you buy a new watch.
1. Y On the App screen tap: “Settings” n
● Pairing the Watch with a Phone
X Hold down (D) for about five seconds, until “Bluetooth”.
the Airplane Mode indicator appears. 1. Y On CASIO WATCH+, tap “Connection
2. Y Tap j next to “CASIO ECB-500”.
● Each time (D) is held down for about five settings”.
seconds, the watch will enter or exit the 3. Y Tap “Unpair”.
2. Y Tap “Connect new watch”.
Airplane Mode. This deletes the watch’s pairing
Airplane indicator information from the phone. 3. Y Select the name of the watch you want
to connect to and then tap “Next”.
4. Y Scroll the status bar downwards and
● From this point, follow the instructions
open the notification panel.
that appear on your phone’s screen to
5. Y Tap e (Bluetooth) to disable Bluetooth, complete the pairing operation.
and then re-enable it.
● Connecting with a Watch that is Already
Paired
Note
Unpairing
1. Y On CASIO WATCH+, tap “Connection
● Note that the actual operation you
To unpair the watch from a phone, delete the settings”.
need to perform depends on the type
pairing information from CASIO WATCH+, the
phone, and the watch.
of phone you are using. For details, 2. Y From the “Previously registered watch”
see your phone documentation. list, tap the name of the phone you want to
● Deleting Pairing Information from connect with.
CASIO WATCH+
● Deleting Pairing Information from the 3. Y Tap “Connect to this ***”.
1. X If the watch is connected with a phone, Watch ● Follow the instructions that appear on
press (C) to terminate the connection. your phone’s screen to complete the
1. X Hold down (A) for about two seconds.
Connected After disconnection
connection operation.
[SET] will appear first, followed by the
Home Time City name. Important!

n ● A phone can be connected with only

one watch at a time. To connect to
another watch, you need to
terminate the current connection.
2. Y On CASIO WATCH+, tap “Connection
settings”.
2. X Hold down (C) for about five seconds.
3. Y In “Previously registered watch”, tap the
Pairing information is deleted after [CRL]
watch you want to unpair.
appears.
4. Y Tap “Delete pairing registration”.

5. Y Tap “Yes”.
This deletes the watch’s pairing n
information from CASIO WATCH+.

3. X Press (A) twice to return to the

Timekeeping Mode.

8
 Operation Guide 5427
Watch Settings 2. Use (B) and (E) to scroll through city
Setting the Time and Date
While the watch is connected to a phone, it will names until the one you want to use as
automatically adjust its date and time settings your Home City is displayed. 1. Hold down the (A) button for about two
to those of the phone. If the watch is not ● Holding down (B) or (E) scrolls city seconds.
connected to a phone, use the procedure names at high speed. [SET] will appear first, followed by the
below to adjust its date and time settings. Home Time City name.
3. To change the summer time setting, press
Getting ready (D).
Perform this procedure in the Timekeeping ● If you don’t want to change the summer
Mode. Use (D) to navigate to the Timekeeping time setting, press (A) twice to exit the
Mode. setting screen.
l Navigating Between Modes
4. Press (E) to cycle through the summer
Timekeeping Mode time settings below.
2. Press (D) six times until the seconds digits
● [AT] are flashing on the display.
The watch switches between standard
time and summer time automatically. Seconds

● [--]
The watch always indicates standard
time.
● [ON]
Specifying a Home Time City The watch always indicates summer
time.
Use the procedure in this section to select a 3. Press (E) to reset the seconds count to 00.
city to use as your Home City. If you are in an ● If the seconds count is between 30 and
area that observes summer time, you can also 59 when you press (E), 1 will be added
enable or disable summer time. to the minute count.

4. Press (D) so the hour setting is flashing.

Important!

● The World time will not be correct if

5. Press (A) twice to exit the setting screen.
you select the wrong city as your
Home Time City.
Note
Hours
● The summer time setting of the
Note watch is “AT (Auto)” when you
5. Set the date.
purchase it, so it will switch between
● Your watch has 40 built-in cities that ● Use (B) and (E) to change the currently
standard time and summer time
you can select as a Home Time City. flashing value.
automatically. You do not need to
If you are using the watch in a switch between standard time and ● Each press of (D) cycles the flashing
location that is not among the built- summer time manually. Even if you setting in the following sequence: hour,
in cities, use the built-in city that is in are in an area that does not observe minute, year, month, day, seconds.
the same time zone as your location. summer time, you can leave the
For information about built-in cities, 6. Press (A) twice to exit the setting screen.
watch’s summer time setting as “AT
see the “City Name List”. (Auto)”.
● For information about summer time
switching dates, see the Summer
1. Hold down the (A) button for about two Time Table.
seconds.
● If the currently indicated time is
[SET] will appear first, followed by the
summer time, the DST indicator will
Home Time City name.
be shown on the display.

DST indicator

9
 Operation Guide 5427
Switching between 12-hour Summer Time World Time
and 24-hour Timekeeping World Time lets you look up the current time
Summer time, which is also known as Daylight
Saving Time (DST), advances the time setting in any one of 40 cities around the globe.
1. Hold down the (A) button for about two one hour, 30 minutes, or some other amount Getting ready
seconds. of time from standard time (STD) during the
Perform this procedure in the Timekeeping
[SET] will appear first, followed by the summer months. Whether or not and how
Mode. Use (D) to navigate to the Timekeeping
Home Time City name. summer time is used depends on your country
Mode.
or local area. Summer time is not used in some
l Navigating Between Modes
countries and local areas.
Timekeeping Mode

Selecting a Setting Item

Each press of (D) cycles the Timekeeping
2. Press (D) four times until the current
Mode settings screen content in the sequence
setting ([12H] or [24H]) is flashing on the
shown below. World time
display.
Home Time City
n n n n n n n n n n n
Summer time Checking the Time in Another
Zone
Tone ON/OFF

1. Hold down the (A) button for about two

3. Press (E) to toggle the setting between Illumination duration seconds.
[12H] (12-hour timekeeping) and [24H]
[SET] will appear first, followed by the
(24-hour timekeeping). 12/24-hour timekeeping Home Time City name.
4. Press (A) twice to exit the setting screen.
Power Saving Setting
Note
Seconds
● While 12-hour timekeeping is
selected, the PM indicator will
Hour
appear on the display while a p.m.
time is shown.
2. Press (A).
Minute
3. Use (B) and (E) to scroll through city
names until the one you want is displayed.
This will cause the current time in the
Year

selected city to appear.

Holding down (B) or (E) scrolls city
Month ●

names at high speed.

PM indicator

Day

City name

4. Press (A) to return to the Timekeeping

Mode.
The small hour and minute hands will
indicate the current time in the city you
selected.

Time of selected city

10
 Operation Guide 5427
Note Note Stopwatch
The stopwatch can measure elapsed time up
● To look up the current time in a city ● The summer time setting of the
to 23 hours, 59 minutes, 59 seconds.
that is not among the built-in cities, watch is “AT (Auto)” when you
It can also measure split times.
select a built-in city that is in the purchase it, so it will switch between
same time zone as the city you want standard time and summer time Getting ready
to look up. For information about automatically. You do not need to
Perform this procedure in the Stopwatch
built-in cities, see the “City Name switch between standard time and
Mode. Use (D) to navigate to the Stopwatch
List”. summer time manually. Even if you
Mode.
are in an area that does not observe
l Navigating Between Modes
summer time, you can leave the
watch’s summer time setting as “AT Stopwatch Mode
Configuring the Summer (Auto)”.
Time Setting ● For information about summer time
switching dates, see the Summer
When summer time is used in a World Time
Time Table.
city, you can enable Summer Time for that city.
l Summer Time

1. Hold down the (A) button for about two

Swapping Your Current
seconds.
Location Time and World Measuring Elapsed Time
[SET] will appear first, followed by the
Home Time City name. Time
Holding down (E) for about three seconds will
swap your World Time with your current
location time.
● In the Timekeeping Mode, you can swap the
time indicated by the main hands with the
time indicated by the small hour hand and 1. Use the operations below to measure
2. Press (A) and then (D). minute hand. elapsed time.
3. Press (E) to cycle through the summer Before swapping After swapping
E Start

time settings below.

n
● [AT] Current location time Current location time E Stop

The watch switches between standard

n
time and summer time automatically. E Resume

[--] n
n

The watch always indicates standard E Stop

time.
● [ON] World Time World Time First hour After first hour
The watch always indicates summer
1/100 seconds
time. Seconds

Seconds
Elapsed hours,
Minutes minutes
Hours
4. Press (A) to return to the Timekeeping
Mode. 2. Press (A) to reset the elapsed time to all
zeroes.

3. Press (D) three times to return to the

Timekeeping Mode.

11
 Operation Guide 5427
Measuring a Split Time Timer Using the Timer
Use the Timer Mode to perform a countdown.
The watch will perform an alert operation 1. Press (E) to start the countdown.
when the end of the countdown is reached. The watch will perform an alert operation
when the end of the countdown is
Getting ready
reached.
Perform this procedure in the Timer Mode. ● Pressing (E) toggles the countdown
Use (D) to navigate to the Timer Mode.
between pause and resume.
1. Use the operations below to measure split l Navigating Between Modes
Seconds
times. Timer Mode
Reset
E Start
n

A Split
n

Start/Stop
A Split release
Elapsed hours, minutes
n

2. Press any button to stop the tone.

E Stop

Setting the Timer Start Time 3. Press (D) twice to return to the
First hour After first hour
Timekeeping Mode.
You cannot change the timer start time setting
1/100 seconds Seconds
while a countdown is in progress. To change ● To stop the timer and reset it to the start
the start time, first stop the timer and reset to time
the current start time.
n l To stop the timer and reset it to the start time 1. While a countdown operation is in
progress, press (E).
1. Hold down the (A) button for about two
This stops the timer.
Seconds
Elapsed hours, seconds.
Minutes minutes [SET] will appear and the hour digits will 2. Press (A).
Hours
flash. This resets the timer to the start time.

2. Press (A) to reset the elapsed time to all

zeroes.

3. Press (D) three times to return to the

Timekeeping Mode. Alarm
The watch performs an alert operation when
Note Hours
Minutes the alarm time is reached.
● While a split time is displayed, it Getting ready
alternates on the dot display with 2. Set the countdown start time.
Perform this procedure in the Alarm Mode.
[SPL]. (D) button: Moves the flashing between Use (D) to navigate to the Alarm Mode.
the hours and minutes. l Navigating Between Modes
(B) and (E) buttons: Changes the flashing
Alarm Mode
hours or minutes digits.
Note
The timer start time can be set in one-
minute units up to 24 hours.

3. Press (A) to exit the setting screen.

4. Press (D) twice to return to the Alarm number
Timekeeping Mode.

Note

● Setting a time of [0:00] specifies a

countdown start time of 24 hours.

12
 Operation Guide 5427
Configuring Alarm Settings Turning Off an Alarm Display Illumination
The face of the watch can be illuminated for
1. Press (E) to scroll through alarm numbers 1. Press (E) to scroll through alarm numbers reading in the dark.
([AL1] to [AL5]) until the number of the until the number of the alarm you want to
alarm you want to configure is displayed. configure is displayed.

Illuminating the Display

Pressing (B) in any mode turns on illumination.

Alarm number Alarm number

2. Hold down the (A) button for about two 2. Press (A).
seconds. This causes the second hand to move to
[SET] will appear, followed by the current “OFF”. Note
alarm time with the hour digits flashing.
3. Press (D) to return to the Timekeeping ● The light may flicker if it is turned on
Mode. while there is a Bluetooth
connection.
Note
● The light will turn off if it is on when
an alert operation starts.
● The on/off status of an alarm will be
Hours indicated by the second hand
pointing to the ON or OFF mark while
the alarm’s setting screen is
3. Set the alarm time. Specifying the Illumination
displayed in the Alarm Mode.
(D) button: Moves the flashing between Duration
the hour and minute digits.
You can select either 1.5 seconds or three
(B) and (E) buttons: Used to change the
seconds as the illumination duration.
currently selected digits (hour or minute). Stopping an Alarm
4. Press (A) to exit the setting screen. 1. Press (D) to enter to the Timekeeping
Pressing any button while the beeper is
Mode.
sounding stops it.
5. Press (D) to return to the Timekeeping l Navigating Between Modes
Mode.
2. Hold down the (A) button for about two
seconds.
Note
[SET] will appear first, followed by the
● The alarm indicator will be displayed Home Time City name.
if any one of the alarms (from [AL1]
to [AL5]) is turned on.

3. Press (D) 3 times until the current setting

Alarm indicator ([LT1] or [LT3]) flashes on the display.

4. Press (E) to toggle between the two

illumination duration settings.
[LT1]: 1.5-second light
[LT3]: 3-second light

5. Press (A) twice to exit the setting screen.

13
 Operation Guide 5427
Hand Alignment 5. Press (D). 3. Press (E) and the current setting ([KEY♪]
Adjustment This enables adjustment of second hand or [MUTE]) will appear on the display.
alignment. [KEY♪]: Enables the operation tone.
Strong magnetism or impact can cause the
time indicated by the analog hands to become [MUTE]: Operation tone is muted.
different from the time on the digital display. If
this happens, correct the hand position.

Getting ready
Perform this procedure in the Timekeeping
Mode. Use (D) to navigate to the Timekeeping
Mode. 6. If the second hand is not at 12 o’clock, use
l Navigating Between Modes (B) and (E) to move it there.
4. Press (A) twice to exit the setting screen.
Timekeeping Mode 7. Press (A) to return to the Timekeeping
Mode.
Configuring Power Saving
Function Settings

Other Settings 1. Hold down the (A) button for about two
seconds.
Getting ready [SET] will appear first, followed by the
Adjusting Hand Alignment Perform this procedure in the Timekeeping Home Time City name.
Mode. Use (D) to navigate to the Timekeeping
1. Hold down the (A) button for about five Mode.
seconds. l Navigating Between Modes

[H.SET] will appear, and then [SUB] will Timekeeping Mode

flash on the display.

Small hour hand
2. Press (D) five times so [POWER SAVING]
is displayed.
Small
3. Press (E) to toggle the setting between
minute hand
enabled (on) and disabled (off).
[on]: Power Saving enabled.
Enabling the Button [- -]: Power Saving disabled.
2. If the small hour and minute hands are not Operation Tone
at 12 o’clock, use (B) and (E) to move them
there. Use the procedure below to enable or disable
● Holding down (B) or (E) moves the the button operation tone.
hands at high speed.
1. Hold down the (A) button for about two
3. Press (D). seconds.
This enables correction of hour and [SET] will appear first, followed by the 4. Press (A) twice to exit the setting screen.
minute hand alignment. Home Time City name.
● Watch operations are disabled while Note
hands are moving.
● For details about Power Saving, see
Minute hand
“Power Saving Function”.
Hour hand

2. Press (D) twice until the current setting

([KEY♪] or [MUTE]) flashes on the display.

4. If the hour and minute hands are not at 12

o’clock, use (B) and (E) to move them
there.

14
 Operation Guide 5427
Moving to Another Time Other Information Summer Time Table
Zone The table below shows the summer time
Use the procedure below to easily change day periods for the watch’s built-in cities that
City Name List observe summer time. When “AT (AUTO)” is
and time settings of the watch to a destination
location. selected, switching between standard time
This list shows the 40 cities that are built in to
and summer time will be performed
watch memory. For information about cities
● Before Boarding automatically at the timing shown in the table
you can select with CASIO WATCH+, refer to
Select a World Time City that corresponds to below.
the app.
your destination. ● For information about the summer time
City Display Name Offset periods for cities you can select with CASIO
UTC UTC WATCH+, refer to the app.
LONDON 0
Current time PARIS +1 Note
ATHENS +2
JEDDAH +3 ● Switch manually between standard
TEHRAN +3.5 time and summer time in the cases
DUBAI +4 below.
ー If the summer time period in your
KABUL +4.5
area has been changed
Destination time
KARACHI +5
ー If you are in an area whose city is
l Specifying a World Time City (Using DELHI +5.5
CASIO WATCH+) not included in the city list
KATHMANDU +5.75
l World Time (Using the Watch)
DHAKA +6
● Prior to Takeoff YANGON +6.5 Summer Time Summer Time
City Name
BANGKOK +7 Start End
Enter the watch’s Airplane Mode when
instructed to do so by airline personnel. HONG KONG +8 2:00 a.m., last
1:00 a.m., last
EUCLA +8.75 London Sunday in
Sunday in March
Airplane indicator
TOKYO +9 October

ADELAIDE +9.5 3:00 a.m., last

2:00 a.m., last
Paris Sunday in
SYDNEY +10 Sunday in March
October
LORD HOWE ISLAND +10.5
4:00 a.m., last
NOUMEA +11 3:00 a.m., last
Athens Sunday in
NORFOLK ISLAND +11.5 Sunday in March
October
WELLINGTON +12
00:00,
CHATHAM ISLANDS +12.75 00:00, March 22
Tehran September 22 or
NUKU’ALOFA +13 or 21
21
l Entering the Watch Airplane Mode
KIRITIMATI +14 2:00, first
3:00, first
● After Arriving BAKER ISLAND -12 Adelaide Sunday in
Sunday in April
PAGO PAGO -11 October
1. Exit the Airplane Mode. HONOLULU -10 2:00 a.m., first
l Entering the Watch Airplane Mode 3:00 a.m., first
MARQUESAS ISLANDS -9.5 Sydney Sunday in
Sunday in April
2. Swap the origin time zone time with the ANCHORAGE -9 October
destination time zone time. LOS ANGELES -8 2:00, first
Lord Howe 2:00, first
DENVER -7 Sunday in
Origin Destination Island Sunday in April
CHICAGO -6 October

NEW YORK -5 2:00 a.m., last

3:00 a.m., first
Wellington Sunday in
n CARACAS -4.5 Sunday in April
September
SANTIAGO -4
2:45, last
ST.JOHN’S -3.5 Chatham 3:45, first
Sunday in
RIO DE JANEIRO -3 Islands Sunday in April
l Swapping Your Current Location Time and September
FERNANDO DE NORONHA -2
World Time (Using CASIO WATCH+) 2:00 a.m., 2:00 a.m., first
PRAIA -1
l Swapping Your Current Location Time and Anchorage second Sunday Sunday in
World Time (Using the Watch)
● The information in the above table is current in March November
as of December 2014.

15
 Operation Guide 5427
● Stopping Radio Wave Emission by This
Summer Time Summer Time Mobile Link Precautions
City Name Watch
Start End
● Legal Precautions The watch is emitting radio waves whenever
2:00 a.m., 2:00 a.m., first
Los This watch complies with or has received the second hand is pointing to e (Bluetooth
second Sunday Sunday in ●

Angeles approval under the radio laws of various connected) or R (Bluetooth connection
in March November
countries and geographical areas. Using standby). Even if the second hand is not
2:00 a.m., 2:00 a.m., first
this watch in an area where it does not pointing at e or “R”, the watch will attempt to
Denver second Sunday Sunday in
comply with or has not received approval connect with a phone once a day to update its
in March November
under applicable radio laws may be a time settings.
2:00 a.m., 2:00 a.m., first
criminal offense. For details, visit the CASIO When in a hospital, on an aircraft, or in any
Chicago second Sunday Sunday in
Website. other area where the use of radio waves is not
in March November
http://world.casio.com/ce/BLE/ allowed, hold down the watch’s (D) button for
2:00 a.m., 2:00 a.m., first
New York second Sunday Sunday in
● Use of this watch inside of aircraft is about five seconds to enter the Airplane
in March November restricted under the aviation laws of each Mode.
24:00, first country. Be sure to follow the instructions of
24:00, fourth airline personnel. Normal timekeeping In Airplane Mode
Santiago Saturday in
Saturday in April
September ● Precautions when using Mobile Link Airplane indicator
02:00, first
02:00, second ● When using this watch in combination with
St. John’s Sunday in
Sunday in March a phone, keep the watch and phone close
November
to each other. A range of two meters is n
Midnight, third
recommended as a guideline, but the local
Sunday in
Midnight, third environment (walls, furniture, etc.), the
Rio de February, or
Sunday in structure of a building, and other factors may
Janeiro midnight, fourth For details, see “Entering the Watch Airplane
October require a much closer range.
Sunday in Mode”.
● This watch can be affected by other devices
February
(electrical devices, audio-visual equipment,
● This information is preset in watch memory
office equipment, etc.) In particular, it can be
at the factory (as of December 2014).
affected by operation of a microwave oven. Copyrights and Registered
If summer time start time and end time rules
The watch may not be able to communicate Copyrights
are changed, the watch will display the
normally with a phone if a microwave oven
newest summer time period after it is Bluetooth® is a registered trademark of
is operating nearby. Conversely, this watch ●

connected to a phone using Mobile Link. Bluetooth SIG, Inc.

may cause noise in radio reception and the
For the latest information about summer
video image of a TV. ● iPhone and App Store are registered
time periods, visit the CASIO Website.
● Bluetooth of this watch uses the same trademarks of Apple Inc. in the United
http://support.casio.com/wat/bs/
frequency band (2.4 GHz) as wireless LAN States and other countries.
devices, and use of such devices in close ● iOS is a trademark or registered trademark
proximity of this watch may result in radio of Cisco Systems, Inc.
Supported Phone Models interference, slower communication speeds ● GALAXY, GALAXY Note, and GALAXY S
and noise for the watch and the wireless
For information about supported phone are registered trademarks of Samsung
LAN device, or even communication failure.
models, visit the CASIO Website. Electronics Co., Ltd.
http://support.casio.com/en/support/ ● Android and Google Play are registered
information.php?cid=009&pid=549 trademarks of Google Inc.
● Other company names and product names
used herein are trademarks or registered
trademarks of their respective companies.

16
 Operation Guide 5427
Troubleshooting Q2 I can’t establish a connection Q3 The watch is in the Airplane Mode.
(pairing) between the watch and a
Exit the watch’s Airplane Mode. Then hold
newly purchased phone.
down the CONNECT button (C) for about 0.5
To connect with a newly purchased phone, seconds.
I can’t pair the watch with a
you will need to perform the pairing operation
phone. again with the new phone. Delete the pairing
information from the watch you are currently
Q1 I’ve never been able to establish a using, and then pair with the new phone.
(pairing) connection between the l If you purchase another phone
watch and phone.

Are you using a supported phone model? I can’t reconnect the watch Q4 I changed the phone’s Bluetooth
Check if the phone model and its and phone. from enabled to disabled, and now I
can’t connect anymore.
operating system are supported by the
watch. Q1 The watch will not re-connect with the On the phone, disable and then re-enable
For information about supported phone phone after they are disconnected. Bluetooth, and then go to the Home Screen
models, visit the CASIO Website. and tap the “CASIO WATCH+” icon. Next, on
http://support.casio.com/en/support/ the watch, hold down the CONNECT button
Is CASIO WATCH+ running on your
information.php?cid=009&pid=549 (C) for about 0.5 seconds.
phone?

Is CASIO WATCH+ installed on your Check if CASIO WATCH+ is running on

phone? the phone. On the phone’s Home Screen,
tap the CASIO WATCH+ icon. Then on
The CASIO WATCH+ needs to be the watch, hold down the CONNECT
installed in order to connect with the button (C) for about 0.5 seconds.
watch.
l A Installing required app on your
phone Q5 I can’t connect after turning off the
phone.
Are your phone’s Bluetooth settings
Turn on the phone and tap the CASIO WATCH
configured correctly?
+ icon. Then on the watch, hold down the
Configure the phone’s Bluetooth settings. CONNECT button (C) for about 0.5 seconds.
For details about setting procedures, see Have you tried turning your phone off and
your phone documentation. then back on again?
iPhone Users Turn the phone off and then back on, and
● “Settings”n“Bluetooth”n On then tap the CASIO WATCH+ icon. Next,
on the watch, hold down the CONNECT
● “Settings” n “Privacy” n “Bluetooth
button (C) for about 0.5 seconds.
Sharing” n “CASIO WATCH+” n On
Android Users
● Enable Bluetooth.

Other than the above.

Some phones need to have BT Smart

disabled to use CASIO WATCH+. For
details about setting procedures, see your Q2 The phone is in the Airplane Mode.
phone documentation.
Connection with the watch is not possible
On the Home Screen, tap: “Menu” n while the phone is in the Airplane Mode. After
“Settings” n “Bluetooth” n “Menu” n “BT exiting the phone’s Airplane Mode, go to its
Smart settings” n “Disable”. Home Screen and tap the “CASIO WATCH+”
icon. Then on the watch, hold down the
CONNECT button (C) for about 0.5 seconds.

17
 Operation Guide 5427
Phone-Watch Connection Phone Finder Auto Time Adjustment

Q1 I can’t establish a connection Q1 Phone Finder does not work. Q1 When does the watch sync its time
between the phone and watch. setting with the phone?
Are the phone and watch disconnected? You can use the CASIO WATCH+ to specify
Have you tried turning your phone off and the auto adjust start time. The watch will also
Phone Finder does not work during
then back on again? automatically sync its time with the phone time
Bluetooth connection.
Turn the phone off and then back on, and when they are connected.
then tap the CASIO WATCH+ icon. Next, Is CASIO WATCH+ running on your
on the watch, hold down the CONNECT phone? Q2 Time is not adjusted when the auto
button (C) for about 0.5 seconds. adjust time is reached.
Check if CASIO WATCH+ is running on
the phone. On the Home Screen, tap the
CASIO WATCH+ icon. Is the time setting adjusted 30 seconds
after the preset time is reached?
Other than the above.
About 30 seconds after the specified auto
If the phone does not respond after a few adjust time is reached, the watch will
seconds, it could mean that the phone is connect with the phone and adjust its time
Has the watch been re-paired with the located too far from the watch. Change to setting accordingly.
phone? a different location and try again.
Is the timer performing a countdown
Perform the procedure below and then re- operation?
Q2 It takes some time before the phone
pair the watch and phone.
responds. The time setting is not adjusted while a
A Delete the pairing information from timer countdown operation is in progress.
The phone will emit a tone when a connection
the watch.
is established with the watch, which takes a
few seconds. Q3 Time is not displayed correctly.
B Delete the pairing information from
CASIO WATCH+.
Q3 The phone cannot be found even Is the time setting on your phone correct?
C Delete the phone pairing information. when it is close to the watch. Correct the phone’s time setting.
l Unpairing
Since communication is performed using iPhone Users
radio waves, the watch may not be able to find “Settings” n “Privacy” n Turn on
the phone even if it is within two meters.
“Location Services” n “System
Changing to a Different Certain environments may make the
Services” n Turn on “Setting Time Zone”.
Phone Model allowable communication range very short.
Android Users
Refer to your phone’s user
Q1 Connecting the current watch to documentation.
another phone.

Clear pairing information from the watch you Other than the above.
are currently using, and then pair with another Establish a connection between the
phone. phone and watch and correct the time
l If you purchase another phone setting.
l Auto Time Adjustment

18
 Operation Guide 5427
World Time Q6 The hands suddenly start moving at
high speed.

Q1 The time for a World Time City is not This is due to one of the reasons below, and
correct. does not indicate malfunction. Simply wait
until normal hand movement resumes.
The summer time start date and time, end date ●The watch is recovering from a Power
and time, or other rules were changed by
Saving condition.
authorities.
l Power Saving Function
●Watch time settings are being adjusted in
accordance with phone settings.
Hand Movement and l Auto Time Adjustment
Indications
Q7 Hands are stopped and buttons do
Q1 I don’t know what mode the watch is not work.
in. The watch is in the charge recovery mode.
Hold down (D) for at least two seconds to Wait until the recovery process is complete
return to the Timekeeping Mode. (for about 15 minutes). The watch will recover
l Navigating Between Modes more quickly if you place it in a brightly lit
location.

Q8 The time indicated by the hands is

different from the digital time.

Strong magnetism or impact may cause the

hands of the watch to go out of position. Use
CASIO WATCH+ to correct the hand
Q2 Buttons do not operate during hand positions.
fast forward. l Adjusting Hand Alignment

Except for the mode navigation button, button

operation is disabled while a hand fast forward
operation is in progress. Stop the hand fast Battery
forward operation to perform the button
operation you want.
Q1 [R] is flashing on the digital display.

Q3 Button operations become disabled A flashing [R] indicates that watch pattern
power is temporarily low and is recovering.
after I change to another mode.
The indicator will disappear after it does.
When you change from one mode to another, l Remaining Charge and Dead Battery
button operations are disabled during the
period that the hands are moving to indicate
information in the entered mode. Wait until the
hands stop moving before performing button
Charging
operations.
Q1 The watch does not work even
Q4 The second hand is jumping at two- though it is exposed to light.
second intervals. The watch stops operating whenever the
Battery power is low. Keep the watch exposed battery goes dead. Keep the watch exposed
to light until it recharges sufficiently. to light until it recharges sufficiently.
l Charging the Watch l Charging the Watch

Q5 All hands are stopped at 12 o’clock

and buttons do not work.

The battery is dead. Keep the watch exposed

to light until the battery recharges sufficiently.
l Charging the Watch

19