Instruction Manual

DAB+ Internet Radio - BCR-9 DABi

CONTENTS

General Safety 4

Product Overview 7

Basic Operation 8

Specification 11

Customer Support 12
GENERAL SAFETY
Read this manual thoroughly before you start using the Speaker.
Store this manual, the completed warranty card, your receipt and the product packaging.
The safety precautions instructions reduces the risk of fire, electric shock and injury when
correctly complied to.

Please follow all instructions and take notice of all warnings.

The lightning flash with symbol within the

triangle is intended to warn you of a
non-insulated dangerous voltage in the
product’s enclosure that could be of
sufficient magnitude to generate a risk of
electric shock to persons.

The exclamation point within the triangle

is intended to warn you to the presence
This unit must be serviced by a qualified
of important operating and maintenance
service personnel only.
instructions in the documents included with
the product.

IMPORTANT INFORMATION
The lightning flash symbol within the triangle is intended to warn you of
non-insulated dangerous voltage the product’s enclosure that could be of
sufficient magnitude to generate a risk of electric shock to persons.

• Only using furniture that can safely support the Products.

• Ensure the Product is not overhanging the edge of the supporting furniture.
• Do not place the product on a high furniture without securing both the furniture
and the product to a stable support.
• Do not place the product on cloth or other conductive materials.
• Warn children of the dangers of climbing on furniture to reach the product
or its controls and to call for an adult to assist.

4
GENERAL SAFETY (CONT.)
IMPORTANT INFORMATION
• Do not expose this product to rain or moisture as it may result in fire or an
electric shock hazard
• Do not temper or change or modify the product in any way.
• Only use Accessories outlined and recommended by the manufacturer.
• Please do not expose the product to splashing or water contact
• Please do not place any object on top of the product

This product must be positioned in a sufficiently stable location, it can be

potentially hazardous due to falling when mounted and can cause injury, particularly
to children if it positioned incorrectly.
• Do not use a damaged power cord, plug or loose outlet. Doing so may cause an
electric shock.
• Do not plug several devices into the same outlet. Doing so may cause the outlet to
overheat and start a fire. Make sure the outlet is readily accessible during operation
of the equipment.
• Do not bend, twist or kink the power cord excessively.
• The apparatus shall not be exposed to dripping or splashing and no objects filled with
liquids, such as vases, shall be placed on the product. Dry location use only.
• Do not run the power cord near heat-producing appliances such as radiators, stoves or
irons. The excessive heat could melt the insulation and expose live wires, resulting in
fire or electric shock.
• No naked flame source, such as candles, should be placed on the product.
• Do not allow anything to rest on or roll over the power cord. Doing so may cause fire
or electric shock.
• Do not run the power cord near heat-producing appliances such as radiators, stoves
or irons. The excessive heat could melt the insulation and expose live wires, resulting in
fire or electric shock.
• Unplug ths product during lightning storms or when unused for long periods of time.
Not doing so may result in fire or electric shock.
• Do not cover the ventilation openings of the product with items such as newspapers,
tablecloths, curtains etc or insert objects into the slots available on the products.
As this could result in the product temperature rising and could cause a fire.

5
GENERAL SAFETY (CONT.)
• If you notice any unusual odors or smoke around the unit, immediately disconnect the
unit from the outlet and contact the service center. Failure to do so may result in fire
or electric shock.
• When not using the unit for long periods of time or when you are moving the unit
please ensure to disconnect the power supply from the wall socket.
• Please beware that Dust could accumulate over time on the unit and cause it to generate
heat and or deteriorate insulation, which in turn may result in an electrical fire.
• The product is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or young children of any age, They must be supervised
product by a person responsible for their safety.
• Batteries from the remote control must be only removed by an adult, the adult must
ensure to keep them out of reach of infants and children. Seek medical attention
immediately if a child has swallowed a battery.
• To maintain the product do not use any chemical or cleaning agent or wet cloth, please
only ensure to utilize a dry cloth to wipe it down from marks or dust and only after
unplugging the product from the power socket.
• Please ensure to contact our call center for any repair or service required for the products.
• Wall mounted installation must be carried out by a qualified personnel only.
Incorrect installation may result in severe personal injury, electric shock and/or fire hazard.

Please make sure upon positioning this product, the place is:
• Not wet or damp and Well ventilated
• Away from direct sunlight or heaters.
• Away from splashes or food.
• Protected from excessive dust or grease.
• Do not place this equipment in a confined space such as a bookcase or similar unit. Allow
20cm above and 5cm spacing on both sides for proper ventilation.
• Do not place the Product near heat sources such as radiators, stoves or other audio
visual equipment that produce heat.
• Do not place containers with liquids, if liquid falls inside the products it may result in
short-circuit, fire or electric shock.
• Do not place small metallic objects on top of the unit.
• Do not use or store flammable or combustible materials near the unit. Doing so may
result in fire or explosion. Do not place any naked flame sources, such as lit candles,
cigarettes or incense sticks on top of the product.

6
PRODUCT OVERVIEW
9

1 10

2 11

3 12

4 13

5
6 14

7
8

1 Button 7 MODE button

• Press to skip previous track Press to switch mode among
in Spotify, Music player and Internet, Spotify Connect, Music
Bluetooth mode. player, DAB, FM, Aux in and
Bluetooth mode.
• Press and hold to fast reverse
current playing track in Music 8 BACK button
player or Bluetooth Mode. Press to return to previous option.

2 Button 9 Display
• Press to pause or play current 10 SLEEP button
playing track. Press to set sleep timer.

3 Button 11 ALARM button

Press to set alarm.
• Press to skip to next track
in Spotify. 12 INFO button
Press to browse program
• Press and hold to fast forward information.
current palying track in music player
and Bluetooth mode. 13 TUNE/VOL. button
Press to shift the function of
4 Menu Button SCROLL/SELECT knob between
• Press to display or exit menu screen. tuning and volume adjusting.

5 Button 14 SCROLL/SELECT knob

• Turn to adjust volume level
Press to switch unit on or standby. when volume adjusting function
6 PRESET Button is active.
• Press and hold to store preset station. • Turn to browse options when
• Press to recall preset station. tuning function is active.
• Press to confirm selection.
7
 6 3000

PRODUCT OVERVIEW (CONT.)

TOP VIEW

1 NFC Sensor

REAR VIEW
6

6 3000

1 2 3 4 5

1 DC IN socket 4 AUDIO OUT sockets

2 AUX IN socket 5 5V 2.1A USB Port - For charging mobile device
3 Headphone socket 6 DAB/FM Antenna

8
PRODUCT OVERVIEW (CONT.)
ICONS ON DISPLAY

ICONS

9
GETTING STARTED
WHAT YOU CAN FIND INSIDE YOUR PACKAGE
• Main Unit
• Power Adaptor
• Manual

Positioning your Radio

Place your radio on a flat/stable surface that is not subject to vibrations.

Adjusting the Antenna

Extend the antenna to ensure you receive the best reception possible in both DAB and FM
radio modes. It may be necessary to adjust the position of the radio and /or antenna to
achieve the best signal.

Turning the unit On/Off

Connect the plug at the end of power adapter cable to the DC IN socket on the rear of unit.
Then insert the power adapter into the mains socket. The unit will turn on.
Press /POWER button to switch unit standby.
To switch the unit off completely, unplug the power adapter from the mains socket.

Radio Auto-standby
To avoid unnecessary energy consumption, the radio will automatically go to standby after 10
minutes if the radio isn’t playing any program/track.

Charging from USB Port

The USB port is designed for charging mobile devices (e.g. MP3 player, mobile phone, etc.). It
supplies 5 V DC at a charging current of up to 2100 mA (2.1 A).
Use a USB cable (not included) to connect mobile device to the USB port of the unit and the
mobile device will start charging.

Automatically Setting the Clock

The clock can be set and updated automatically if are connected to the internet or receive
DAB/FM signals in your location. In order for the clock to synchronise to the current local time
you must leave it on an Internet Radio, DAB or FM station for a short period of time. You can
also choose how you would like to keep the clock up to date the Internet, DAB or FM radio
signals. Go to Main menu - System settings - Time/Date - Auto update.

10
GETTING STARTED (Cont.)
Wireless LAN Setting
• A broadband Internet connection.
• A wireless access point (Wi-Fi) connected to your broadband Internet,
preferably via a router.
• If your wireless network is configured to use Wired Equivalent Privacy (WEP) or Wi-Fi
Protected Access (WPA) data encryption then you need to know the WEP or WPA code so
you can get the Internet Radio to communicate with the network.
• If your wireless network is configured for trusted stations you will need to enter the Radio’s
MAC address into your wireless access point. To find the Radio’s MAC address use menu
items as follows: Main menu - System settings - Network - View settings - MAC address.
Before you continue, make sure that your wireless access point is powered up and
connected to your broadband Internet. To get this part of the system working, read
the instruction supplied with the wireless access point is highly recommended.

11
INTERNET RADIO MODE
1. The display will show “Main menu” after “Setup wizard” completed. Press SCROLL/SELECT
knob to select Internet radio mode.

2. While “Station list” is highlighted, press SCROLL/SELECT knob to confirm.

3. Then refer following section to choice stations. Or if failed to connect to network,

please follow:
a. Check your Router, see it working normally or not;
b. Relocate your radio to a stronger signal position is necessary!
c. Make sure your password is correct input.

12
INTERNET RADIO MODE (Cont.)
Local “Country” will change according to your current location (e.g. Local Australia).
It displays local stations of your current location.
1. To enter local stations, press MENU button - Station list - Local “Country”, press
SCROLL/SELECT knob to confirm.

2. Station genres are listed. Turn SCROLL/SELECT knob to select the genre you wanted, and
then press SCROLL/SELECT knob to confirm.
3. Turn SCROLL/SELECT knob to select you desired station, and then press
SCROLL/SELECT knob to confirm broadcasting.

13
INTERNET RADIO MODE (Cont.)
Stations enables you to select a station from categories: Location, Genre, Popular stations
or New stations, or search stations.

1. Press MENU button - Station list - Stations, press SCROLL/SELECT knob to confirm.

2. In “Stations” menu:
• “Location” enables you to choose from the radio stations provided by any country
which you choose from a list.
a. While “Location” is highlighted, press SCROLL/SELECT knob to confirm.
b. Turn SCROLL/SELECT knob to select the region you wanted, and then press
SCROLL/SELECT knob to confirm.
c. Turn SCROLL/SELECT knob to select the country you wanted, and then press
SCROLL/SELECT knob to confirm.
d. Turn SCROLL/SELECT knob to select the station you wanted, and then press
SCROLL/SELECT knob to confirm. The station will be broadcast.
• “Genre” enables you to choose radio stations according to their content, for example Classic
Rock, Sport, News, etc.
a. While “Genre” is highlighted, press SCROLL/SELECT knob to confirm.
b. Turn SCROLL/SELECT knob to select the genre you wanted, and then press
SCROLL/SELECT knob to confirm.
c. Turn SCROLL/SELECT knob to select through All Stations, Highlighted Stations or the
country you wanted, and then press SCROLL/SELECT knob to confirm.
d. Turn SCROLL/SELECT knob to select the station you wanted, and then press
SCROLL/SELECT knob to confirm. The station will be broadcast.
• “Search stations” enables you to enter all or part of station name to find a station.
• “Popular stations” enables your radio to list the stations that have the most listeners.
• “New stations” enables your radio to list the stations that have recently joined the
Internet radio network.
14
STORING PRESET STATIONS
Your radio can store up to 10 of your favourite Internet stations. This will enable you to access
your favourite stations quickly and easily.
1. While playing your favourite station, press and hold PRESET button on the main unit until
display shows as below:

2. Turn SCROLL/SELECT knob to cycle through the preset numbers 1-10.

3. Select one preset number and then press the SCROLL/SELECT knob, display will
show “Preset stored”.
4. Preset number “ #” will show on the display.

15
SPOTIFY
Spotify brings you the right music for every moment – on computers, mobiles, tablets, home
entertainment systems, cars, gaming consoles and more.

Just search for music you love, or let Spotify play you something great. Create and listen to
your playlists for free or subscribe to Premium for on-demand access at the highest audio
quality – with zero ads.

Listen out loud with Spotify Connect

1. Connect your DAB+ Internet Radio to your wifi network
2. Open up the Spotify app on your phone, tablet or laptop using
the same wifi network
2. Play a song and select Devices Available.
3. Select your partner device and start listening.

16
SPOTIFY (Cont.)
Note: If unattended to use radio for long periods of time, e.g. overnight, while on holiday
or while out of the house, select “NO” to avoid unnecessary energy consumption.
*For information on how to set up and use Spotify Connect please visit
www.spotify.com/connect

Controlling Spotify Connect

You can now control Spotify from the app like normal; search for and play your tracks, change
the volume and add to playlists even though playback is through your radio. The next time
you open the Spotify app, playback will continue through your radio. Spotify Connect is a
cloud-based service, therefore after activation on your radio, your smartphone or tablet no
longer needs to be on the

17
DAB MODE
Selecting DAB Mode
1. Press MODE button repeatedly to select DAB mode.
2. For initial use, radio will carry out a full scan and store stations list in memory

3. Once the scanning is completed, the DAB/DAB+ stations will be displayed in

alphanumeric order. The first station in the list will be selected, press
SCROLL/SELECT knob to broadcast.

NOTE If no DAB/DAB+ signal is found in your area, it may be necessary to relocate your
radio to a stronger signal area. Visit: www.digitalradioplus.com.au to check if DAB is
available in your area.

Selecting another station

1. While a program is playing, press MENU button, turn SCROLL/SELECT knob
to select “Station list”, and then press SCROLL/SELECT knob to confirm.
2. Turn SCROLL/SELECT knob to select the station you want to play, and then
press SCROLL/SELECT knob to confirm.
NOTE alternatively, while a program is playing, press TUNE/VOL. button to activate tuning
function of SCROLL/SELECT knob. Turn SCROLL/SELECT knob to browse through
station list, and then press SCROLL/SELECT knob to confirm the station you desired.

18
DAB MODE (Cont.)
Scanning Stations
Press MENU button, turn SCROLL/SELECT knob to select “Scan”, and then press
SCROLL/SELECT knob to full scan.

Manual Tune
This can help you when adjusting your antenna or when adding stations that were missed
while auto tuning.
1. Press MENU button, turn SCROLL/SELECT knob to select “Manual tune”, and then
press SCROLL/SELECT knob to confirm, the display will show the channel number
and frequency.
2. Turn SCROLL/SELECT knob to select the channel you wanted, and then press
SCROLL/SELECT knob to confirm. (Visit: www.digitalradioplus.com.au to learn more
channel and frequency of DAB stations.)

DRC (Dynamic Range Control) value

If you are listening to music with high dynamic range in a noisy environment (for example
classical music while cooking), you may wish to compress the audio dynamic range. This
makes quiet sounds louder and loud sounds quieter
1. Press MENU button, turn SCROLL/SELECT knob to select “DRC”, and then press
SCROLL/SELECT knob to confirm.
2. Turn SCROLL/SELECT knob to select “DRC high”, “DRC low” or “DRC off”, and then
press SCROLL/SELECT knob to confirm.

19
DAB MODE (Cont.)
Changing Station Order
You may want to display the stations in different order.
1. Press MENU button, turn SCROLL/SELECT knob to select “Station order”, and then
press SCROLL/SELECT knob to confirm.
2. Turn SCROLL/SELECT knob to select “Alphanumeric”, “Ensemble” or “Valid”, and
then press SCROLL/SELECT knob to confirm your selecting option.

Viewing Station Information

DAB/DAB+ stations broadcast additional information. To view DAB station information, press
SCROLL/SELECT knob to Press INFO button repeatedly to view information through DLS
(Dynamic Label Segment), Ensemble, Program Frequency, Signal Quality, Signal Strength,
Bitrate, Codec, Channel and Date.

Note: To view station information while the display is playing full screen pictures, press
SCROLL/SELECT knob to minimize picture, and then you can press INFO knob
repeatedly to view information. Press SCROLL/SELECT knob a second time to play
full screen pictures.

Showing Signal Strength

While you selected signal strength, a signal bar with the strength of the current station will
show on the display.

The indicator on the signal bar shows the

minimum acceptable signal level.
Note: Stations with signal strength below
the minimum signal level may not provide
a steady stream of audio.

20
FM Mode
Selecting FM Mode
1. Press MODE button repeatedly to select FM mode.
2. For initial use, it will start at the beginning of the FM frequency range (87.50MHz).
Otherwise, the last listened FM station will be selected.

3. To manually change the FM frequency, while FM frequency shows up,

press TUNE/VOL. button to activate tuning function of SCROLL/SELECT knob,
and then turn SCROLL/SELECT knob clockwise or anticlockwise to change the
frequency by 0.05MHz per step.
4. To automatically scan, while FM frequency shows up, press TUNE/VOL. button to
activate tuning function of SCROLL/SELECT knob first, and then turn
SCROLL/SELECT knob clockwise or anticlockwise. Press SCROLL/SELECT knob,
your radio will skip forward or backward until it reached the next available station.

21
FM Mode (Cont.)
Scan Settings
This enables you set FM scans stop at stations with strong signal or stop at any available
station.By default, FM scans stop at any available station. This may result in a poor signal-to-
noise ratio (hiss) from weak stations.
1. Press MENU button, turn SCROLL/SELECT knob to select “Scan setting”, and then
press SCROLL/SELECT knob to confirm.
2. Display will show “Strong stations only?”, turn SCROLL/SELECT knob to select
“YES”, and then press SCROLL/SELECT knob to confirm. The scans stop only at
stations with good signal strength.
3. Turn SCROLL/SELECT knob to select “NO”, and then press SCROLL/SELECT knob
to confirm. The scans stop at any available station. This may result in a poor
signal-to-noise ratio (hiss) from weak stations.

Audio Settings
By default, all stereo stations are reproduced in stereo. For weak stations, this may result in a
poor signal-to-noise ratio (hiss).
1. To play weak stations in mono, press MENU button, turn SCROLL/SELECT knob to
select “Audio setting”, and then press SCROLL/SELECT knob to confirm.
2. Display will show “Listen in Mono only?”, turn SCROLL/SELECT knob to select “YES”,
and then press SCROLL/SELECT knob to confirm.

22
FM Mode (Cont.)
Storing Preset Stations
Your radio can store up to 10 of your favourite FM stations. This will enable you to access your
favourite stations quickly and easily.
1. While playing your favourite station, press and hold PRESET button on the main unit
until display shows as below:

2. Turn SCROLL/SELECT knob to cycle through the preset numbers 1-10.

3. Select one preset number and then press the SCROLL/SELECT knob, display
will show “Preset stored”.
4. Preset number “ #” will show on the display.

Recalling a Preset Station

1. Press PRESET button to show the saved preset stations.

2. Turn SCROLL/SELECT knob to select the preset station you want to play and then
press the SCROLL/SELECT knob to confirm.
3. The display will show “Preset Empty” if the preset station isn’t allocated.

23
AUX Mode
Aux in allows for quick and easy connection to an MP3 player or other external audio sources.
1. Before connecting to the mains socket, use a 3.5mm audio cable (not supplied)
to connect to your external audio device through the AUX IN socket on the
rear of unit.
2. Connect power adapter to mains socket, press /POWER button to switch unit on.
3. Press MODE button repeatedly to select Aux in mode.

4. In Aux in mode, you may operate your audio device directly for playback features.
5. To gain optimal volume levels, adjusting the output volume level on the audio device
as well is recommended.

24
Bluetooth Mode
Pair the unit with a Bluetooth device to listen to music:
1. Press the MODE button to select Bluetooth mode.
2. The display will flash in repeatedly.
3. Activate your Bluetooth device and select the search mode.
4. “BCR-9 DABi” will appear on your Bluetooth device.
5. Select “BCR-9 DABi” and enter “0000” for the password if necessary.
6. The icon will remains steadily on the display when connection is successful.
7. While a track is playing, you can:
a. Press button once to resume to the beginning of track, and then press
button once again to skip to previous track; press and hold button to fast
reverse current playing track.
b. Press button to pause or play current playing track.
c. Press button to skip to next track; press and hold button to fast forward
current playing track.
8. To disconnect the Bluetooth connection, press MENU button, turn SCROLL/SELECT
knob to select “BT disconnect”, and then press SCROLL/SELECT knob to confirm.
The display will show “Device disconnect?”, turn SCROLL/SELECT knob to select
“YES”, and then press SCROLL/SELECT knob to confirm.

NFC (Near Field Communication)

NFC enables you pair and connect with Bluetooth devices in an easy way.
1. Press MODE button repeatedly to select Bluetooth mode.
2. Make sure that your NFC is turned “On” on your mobile device.
3. Hold your mobile device about 2cm close to NFC sensor on top panel for
receiving an auto-connection between your mobile device and radio.
4. Your device then will turn-on Bluetooth automatically and will pair your device with
radio. No additional settings are necessary.

25
General Operation
Settings Sleep
This feature enables your radio to switch to standby mode by itself after a set sleep time.
1. Press MENU button - Main menu - Sleep, and then press SCROLL/SELECT knob
to confirm.
2. Turn SCROLL/SELECT knob to view options Sleep OFF, 15, 30, 45 or 60 MINS,
press SCROLL/SELECT knob to confirm. The sleep icon and sleep time will show on
the display.
3. To turn the sleep function off while the sleep timer is still counting down, select
“Sleep” option, turn SCROLL/SELECT knob to select “Sleep OFF”.
Note: Alternatively, press SLEEP button repeatedly to set sleep time.

Setting Alarm
Your radio includes dual alarms. Set Alarm, making sure set time at first.
1. Press MENU button - Main menu - Alarms, and then press SCROLL/SELECT
knob to confirm.
Note: Alternatively, press ALARM button to go to alarm menu.
2. Turn SCROLL/SELECT knob to select “Alarm 1” or “Alarm 2”, and then press
SCROLL/SELECT knob to confirm.
3. Turn SCROLL/SELECT knob to select options, and then press SCROLL/SELECT knob
to confirm the setting.

4. When the display shows “Alarm Saved”, the alarm setting is successful. or will
show on the display.
5. To temporarily switch off alarm, press SCROLL/SELECT knob repeatedly to set
snooze time for 5, 10, 15 or 30 minutes in turn. The set snooze time will show on the
display and unit will go to standby.
6. To turn off alarm, press /POWER button when the alarm sounds.
7. To cancel Alarm, refer to steps1-3 to enable alarm “Off”.
26
General Operation (Cont.)
Setting Equaliser
This feature enables you to choose a sound equalization profile. Each of the equalization
setting will change the tone of the sound from your radio when selected.
1. Press MENU button - Main menu - System settings - Equaliser, and then press
SCROLL/SELECT knob to confirm.
2. Turn SCROLL/SELECT knob and then press it to select a profile through Normal,
Flat, Jazz, Rock, Movie, Classic, Pop, News and My EQ.
3. To set up My EQ, select “My EQ profile setup”, and then press SCROLL/SELECT
knob to confirm. Turn SCROLL/SELECT knob to select Bass, Treble or Loudness, and
then press SCROLL/SELECT knob to confirm. Turn SCROLL/SELECT knob to change
the value of Bass, Treble or Loudness, and then press SCROLL/SELECT knob to
confirm. Press BACK button, display will show “Save changes”. Turn and press
SCROLL/SELECT knob to select “YES” to save changes.

Network Setup
Users encountering networking issue may find these options useful for diagnosing and fixing
network problems.
1. Press MENU button - Main menu - System settings - Network, press
SCROLL/SELECT knob to confirm.
2. Turn SCROLL/SELECT knob to select your preferred network setting option:

3. Press SCROLL/SELECT knob to confirm your setting.

27
General Operation (Cont.)
Setting Time/Date
1. Press MENU button - Main menu - System settings - Time/Date, press
SCROLL/SELECT knob to confirm.
2. Turn SCROLL/SELECT knob to select options, and then press SCROLL/SELECT
knob to confirm the setting.

3. Then setting time according to your personal preference.

Setting Language
This feature enables you to change menu language. There are thirteen languages available:
English/German/Danish/Dutch/Finnish/French/Italian/Norwegian/Polish/Portuguese/
Spanish/Swedish/Turkish.
1. Press MENU button - Main menu - System settings - Language,
press SCROLL/SELECT knob to confirm.
2. Turn SCROLL/SELECT knob to select your language, and then press
SCROLL/SELECT knob to confirm.

Factory Reset
Doing a factory reset clears all user defined setting, replacing them with the original default
values, so time/date, DAB station list and preset stations are all lost.
1. Press MENU button - Main menu - System settings - Factory Reset, press
SCROLL/SELECT knob to confirm.
2. Turn SCROLL/SELECT knob to select “YES”, and then press SCROLL/SELECT
knob to confirm.

28
General Operation (Cont.)
Software Update - Over the Network
From time to time, your radio may make software upgrades available with bug fixes and/or
additional features. If your radio detects that newer software is available, it will ask if you want
to go ahead with an update. If you agree, the new software is then downloaded and installed.
After a software upgrade, all user settings are maintained.

1. Press MENU button - Main menu - System settings - Software update, press
SCROLL/SELECT knob to confirm.
2. Turn SCROLL/SELECT knob to select “Auto-check setting”, your radio will check
periodically for new version software.
3. Turn SCROLL/SELECT knob to select “Check now”, your radio will now to check new
version software and automatically upgrade the detected new version software.

Setup Wizard
When this unit is started for the first time, it runs through a setup wizard to configure settings
for date/time and network. Once this has finished, the system is ready to use in most modes.
Redo setup wizard will not erase user settings such as searched stations and presets.
1. Press MENU button - Main menu - System settings - Setup wizard, press
SCROLL/SELECT knob to confirm.
2. Turn SCROLL/SELECT knob to select “YES”, and then press SCROLL/SELECT knob
to confirm.

Viewing System Info

This information may be requested when dealing with technical support issues.
1. Press MENU button - Main menu - System settings - Info, press
SCROLL/SELECT knob to confirm.
2. Turn SCROLL/SELECT knob to view “SW version”, “Spotify version”, “Radio ID”
and “Friendly Name”.

29
General Operation (Cont.)
Setting Backlight
This radio display has a backlight with adjustable brightness level.
1. Press MENU button - Main menu - System settings - Backlight,
press SCROLL/SELECT knob to confirm.
2. Turn SCROLL/SELECT knob to select “Power-on Level” or “Standby Level”,
then press SCROLL/SELECT knob to confirm.
3. Turn SCROLL/SELECT knob to select backlight level, and then press
SCROLL/SELECT knob to confirm the setting.

30
General Operation (Cont.)
Multi-room
Multi-room is a feature that enables you control your radio (one or more) via UNDOK App for
playback. You can enjoy music by using your smartphone or tablet which has UNDOK App to
respectively control the radios (multi-room capable devices) in the kitchen, bedroom or living
room. Of course you also can group control the radios for playing.
1. To use multi-room feature, download UNDOK app from App Store for your iOS
smartphone or download from Google Play for your Android smartphone.
2. Start UNDOK app, making sure your radio and smartphone are connected to same
WiFi network.
3. All available devices will be listed. Tap your radio “BRC-9 DABi xxxxxxxxxxxx”
(the 12 digit alphanumeric code is the MAC address of your radio) to connect to.
4. Now playing screen is shown. (Playing Internet radio mode for example.)

31
General Operation (Cont.)
5. If you have more than one radio (multi-room capable device), you can group them to
play synchronously. Tap the ▼ “Return to device list” icon.
6. Create group, taping the edit icon which is following device name on device list, and
then “Group Setup” screen will be shown. (Please refer to Figure 1 and 2.)
a. Tap the grey circle before device name which is under “Sharing with”
option on “Group setup” screen and make it turn green to add the device
to group. (Please refer to Figure 2.)
b. Tap “Rename” under “Group name” option on “Group Setup” screen to
enter a group name or select one usual name from the list, and then select
“Done” to create group. (Please refer to Figure 2 and 3.)
Note: To dissolve the group, tap “Delete group” to delete the group.
(Please refer to Figure 2 and 7.)
c. Device list will appears again and the group will be shown with group
name and the devices in the group. Tap on group name to select the group.
(Please refer to Figure 4.)
d. All clients in the group will synchronously play the program which the
master device is playing. You can drag the volume control bar to change
the master volume for all grouped devices. You also can tap on the volume
control and then change volume for each device respectively.
(Please refer to Figure 5 and 6.)
Note: Master device is which you selected from device list for editing group;
client is the device you selected sharing with on “Group Setup” screen.

Figure 1 Figure 2

32
General Operation (Cont.)
Figure 3 Figure 4

Figure 5 Figure 6

33
General Operation (Cont.)

Figure 7

34
General Operation (Cont.)
7. Alternatively, you can edit group through your radio.
a. Press MENU button - Main menu - System settings - Multi-room,
and then press SCROLL/SELECT knob to confirm.
b. Turn SCROLL/SELECT knob to select options, and then press SCROLL/SELECT
knob to confirm.

8. To ensure you can use UNDOK app when your radio is in all modes especially in
non-internet modes (i.e. in DAB, FM, Bluetooth or Aux in mode) you need to
select Main menu - System settings - Network - Keep network connected -
YES. This also allows you to wake the radio from standby using your UNDOK app.
Note: If unattended to use radio for long periods of time, e.g. overnight, while on holiday
or while out of the house, select “NO” to avoid unnecessary energy consumption.
Your radio cannot be found in the network and cannot be waked-up by using
UNDOK app once you set “Keep network connected” to “NO”.

35
TROUBLESHOOTING
If a problem occurs, it may often be due to something very minor. The following table
contains various tips.

36
SPECIFICATIONS
Audio Output Power 5W RMS

Power Adaptor

Input 110-240V, 50-60 Hz 0.5A Max

Output 7.5V 2.4A

Frequency

DAB 174.928-239.200 MHz

FM 87.5-108 MHz

Power Consumption

Operation 24W (Max)

Standby <2W

Dimensions 250 x 165 x 135 mm (w x d x h)

37
 CUSTOMER HELPLINE:
1300 296 699
[email protected]

DISTRIBUTED BY:
Ayonz Pty Ltd
PO Box 3291, North Strathfield, NSW, 2137