FCC / IC licensed bands Datasheet

VHF, 220 MHz, UHF, 900 MHz

Private market spectrum
220, 700, and 900 MHz
ering
Deliv it/s
Mb
1.15 AM
25 Q
6

SMART, SECURE POINT-TO-MULTIPOINT RADIO

The Aprisa SR+ in brief

• 135–175, 215–240, 400–520, 757–758 and
787–788, 896–902 and 928–960 MHz
• RS-232 and IEEE 802.3 with multiple port options
• Software selectable 12.5 kHz, 15 kHz, 25 kHz,
30 kHz, 50 kHz, and 100 kHz channel sizes
(frequency band dependent)
• Full and half duplex operation, single or dual
frequency (point-to-point option)
• Data rates of up to 576 kbit/s half duplex /
1,152 kbit/s full duplex
• 256, 192 or 128 bit AES encryption
• AES-CCM to NIST SP 800-38C

Smart, secure, industry-leading speed licensed point-to-multipoint SCADA • Adaptive Coding and Modulation: QPSK to 256 QAM

communications for industrial monitoring and control for the electricity, water, • Automatic Transmit Power Control: reduces
interference in large networks, improves power
savings
oil and gas industries – now with 256 QAM
• Advanced forward error correction

• High capacity: to meet the growing number of data-intensive applications in the SCADA environment, • Ethernet and IP / TCP / UDP header compression
(ROHC) and payload compression
the Aprisa SR+ provides data rates of up to 576 kbit/s half duplex / 1,152 kbit/s full duplex in 100 kHz • Software selectable dual / single antenna
port operation
licensed channels.
• Transparent to all common SCADA protocols
• Secure: with its defense in depth approach, including AES encryption, authentication, address filtering and
user access control including RADIUS, the Aprisa SR+ protects against vulnerabilities and malicious attacks.
• Dedicated alarm port and optional USB connected
GPS receiver
• Protected station option
• Future-proof: the Aprisa SR+ supports dual serial and dual Ethernet ports in a single, compact form factor, • Power optimized option
designed to cryptographically secure legacy serial, protect existing device investment, and enable new
applications. Old and new application protocols can be run side by side.
• Layer 2 bridge (VLAN aware), layer 3 router, and
advanced gateway router combination L2/L3 modes
• VLAN tagging and Q-in-Q
• Advanced L2 / L3 capabilities: selectable L2 bridge, L3 router, or advanced gateway router combination
L2/L3 modes with VLAN, QoS, NAT, and filtering attributes to maximize capacity in constrained bandwidth
• Flexible QoS priority enforcement – by port or traffic
type, VLAN, PCP/DSCP, rule including SMAC/DMAC,
IP address and IP protocol, and EtherType
and prioritize mission critical traffic while meeting tough security and IP network policy imperatives.
• L2 / L3 / L4 filtering

• Adaptable: the Aprisa SR+ integrates into a range of network topologies, with each unit configurable • MEMS accelerometer motion sensing anti-tamper
option
as a master station, repeater or remote station; connect multiple RTUs / PLCs to a single radio.
• IEEE 1613 and IEC 61850-3 substation protection

• Flexible interfaces: the data interfaces can be configured for serial or Ethernet operation; a range • 30 kV ESD antenna protection

of options are supported, including two serial and two Ethernet, one serial and three Ethernet, or four • Class 1, Division 2 for hazardous protection

Ethernet ports. Support for NMEA GPS receiver option. • –40 to +70 °C operational temperature without fans
• 210 mm (W) x 130 mm (D) x 41.5 mm (H)

• Link efficiency: Adaptive Coding and Modulation (ACM) and forward error correction maintains the
integrity of the wireless connection while an effective channel access scheme and IP routing ensures
• FCC and IC standards compliant

efficient transfer of data across the Aprisa SR+ network. Automatic Transmit Power Control maintains Aprisa SR+ applications
the minimum transmit power required for effective communications enhancing both frequency reuse and • Electricity grid: distribution automation control and
protection in MV / HV distribution / transmission
power savings. Advanced payload and Ethernet / IP / TCP / UDP header compression.
• Smart grid, DA, DFA, DER, cap bank control

• Reliable and robust: the Aprisa SR+ requires no manual component tuning and maintains its performance • Oil & Gas: production metering, lift pump
automation
over a wide temperature range using full specification industrially rated components and shared Aprisa
family heritage. • AMI / AMR: high density data concentrator backhaul
• Renewables: wind farm, tidal, hydro automation

• Easily managed: an easy to use GUI supports local element management via HTTPS and remote element • Water and wastewater: flow, level, pressure
modulation automation and pump status
management over the air and SNMP support allows network-wide monitoring and control via a variety of
supported third party network management systems.
 FCC and IC licensed bands Datasheet
SYSTEM SPECIFICATION
GENERAL SECURITY
NETWORK TOPOLOGY Point-To-MultiPoint (PTMP), Master, Remote, Repeater DATA ENCRYPTION 256, 192 or 128 bit AES
Point-To-Point (PTP) FD see ‘Aprisa SR+ PTP Datasheet’ DATA AUTHENTICATION CCM
NETWORK INTEGRATION Serial and Ethernet (router or bridge mode) CRYPTOGRAPHIC PROTECTION FIPS 140-2
PROTOCOLS IPSEC Transparent
ETHERNET IEEE 802.3, 802.1d/q/p INTERFACES
SERIAL Legacy RS-232 transport, Mirrored Bits ®, SLIP and Terminal ETHERNET PORTS RJ45 10/100Base-T auto-neg MDI/MDIX
Server support SERIAL PORTS RJ45 RS-232
Additional RS-232 / RS-485 port via USB converter (option)
WIRELESS Proprietary
GPS RECEIVER Support for optional USB connected GPS receiver
SCADA Transparent to all common SCADA protocols such as Modbus,
MANAGEMENT 1 x USB micro type B (device port)
IEC 60870-5-101/104, DNP3 or similar
1 x USB standard type A (host port)
RADIO FREQ BAND TUNING RANGE TUNE STEP ANTENNA 2 x TNC 50 ohm female
FREQUENCY RANGE 135 MHz 135 – 175 MHz 0.625 kHz Software selectable single or dual port operation
ALARM I/O 1 x RJ45 Alarm I/O interface 2 x inputs + 2 x outputs
220 MHz 215 – 240 MHz 0.625 kHz
LEDs Status: OK, MODE, AUX, TX, RX
400 MHz 400 – 470 MHz 6.25 kHz Diagnostics: RSSI, traffic port status
(Note 4) 450 MHz 450 – 520 MHz 6.25 kHz TEST BUTTON Toggles LEDs between diagnostics / status
(Note 4) 700 MHz 757 – 758 & 787 – 788 MHz 6.25 kHz PRODUCT OPTIONS (specified at order)
(Note 5) 896 MHz 896 – 902 MHz 6.25 kHz DATA PORT CONFIGURATION OPTIONS 2 x Ethernet ports + 2 serial ports
3 x Ethernet ports + 1 serial port
(Note 5) 928 MHz 928 – 960 MHz 6.25 kHz 4 x Ethernet ports
CHANNEL SIZE 12.5 kHz, 15 kHz, 25 kHz, 30 kHz, 50 kHz and DUPLEX OPTIONS Half Duplex or Full Duplex
100 kHz software selectable PROTECTED STATION OPTION Providing hot-swappable / hot-standby redundant
DUPLEX Single frequency half-duplex hardware switching
Dual frequency half-duplex POWER
Dual frequency full-duplex
INPUT VOLTAGE Radio 10 – 30 VDC negative earth
FREQUENCY STABILITY ± 0.5 ppm
Protected Station 10 – 60 VDC floating
FREQUENCY AGING < 1 ppm / annum
RECEIVE All bands < 3 W (217 mA at 13.8 VDC) in active receive state
TRANSMITTER < 2 W (145 mA at 13.8 VDC) in idle receive state
< 0.5 W (36 mA at 13.8 VDC) in sleep mode
MAX PEAK ENVELOPE POWER (PEP) 10.0 W (+40 dBm)
TRANSMIT 135 and 220 MHz < 26 W (1884 mA at 13.8 VDC)
AVERAGE POWER OUTPUT 256 QAM 0.01 – 2.0 W (+10 to +33 dBm, in 1 dB steps)
400, 450, 700, 896, 928 MHz < 28 W (2028 mA at 13.8 VDC)
64 QAM 0.01 – 2.5 W (+10 to +34 dBm, in 1 dB steps)
MECHANICAL
16 QAM 0.01 – 3.2 W (+10 to +35 dBm, in 1 dB steps) DIMENSIONS Radio 210 mm (W) x 130 mm (D) x 41.5 mm (H)
QPSK 0.01 – 5.0 W (+10 to +37 dBm, in 1 dB steps) 8.27” (W) x 5.12” (D) x 1.63” (H)
Protected Station 434 mm (W) x 372 mm (D) x 88.9 mm (H) 2 RU
(Note 2) 4-CPFSK 0.01 – 10.0 W (+10 to +40 dBm, in 1 dB steps)
17.1” (W) 14.6” (D) 3.5” (H)
ADJACENT CHANNEL POWER < –60 dBc WEIGHT Radio 1.25 kg (2.81 lbs)
TRANSIENT ADJACENT CHANNEL POWER < –60 dBc Protected Station 10.0 kg (22 lbs) (includes the 2 radios)
SPURIOUS EMISSIONS < –37 dBm MOUNTING Wall, Rack or DIN rail (radio only)
ATTACK TIME < 1.5 ms ENVIRONMENTAL
RELEASE TIME < 0.5 ms OPERATING TEMPERATURE –40 to +70 ˚C (–40 to +158 ˚F)
DATA TURNAROUND TIME < 2 ms HUMIDITY Maximum 95 % non-condensing
MANAGEMENT & DIAGNOSTICS
EMISSION DESIGNATORS see https://4rf.com/emission-designators
LOCAL ELEMENT SSH and HTTP/S web servers with full control / diagnostics
RECEIVER 12.5 kHz 25 kHz 50 kHz 100 kHz Partial diagnostics via LEDs and test button
SENSITIVITY (BER < 10 ) -6
min coded 256 QAM –95 dBm –91 dBm –88 dBm –85 dBm Software upgrade from PC or USB flash drive
max coded 64 QAM –103 dBm –99 dBm –96 dBm –93 dBm REMOTE ELEMENT SSH and HTTP/S over-the-air remote element management
with control / diagnostics
max coded 16 QAM –110 dBm –107 dBm –104 dBm –101 dBm Network software upgrade over-the-air
max coded QPSK –115 dBm –112 dBm –109 dBm –106 dBm NETWORK SNMPv2 and SNMPv3 security support for integration with
min coded 4-CPFSK –113 dBm –110 dBm –107 dBm –104 dBm external network management systems
OVER THE AIR Low overhead SuperVisor Extended Network Management
ADJACENT CHANNEL SELECTIVITY > –47 dBm > –37 dBm > –37 dBm > –37 dBm
(EXM)
(Note 1)
[> 48 dB] [> 58 dB] [> 58 dB] [> 58 dB] COMPLIANCE
CO-CHANNEL REJECTION max coded QPSK > –10 dB RF FCC CFR47 Part 24 / 27 / 80 / 90 / 95 / 101
CO-CHANNEL REJECTION min coded 256 QAM > –26 dB IC RSS 119 / RSS 134
INTERMODULATION RESPONSE REJECTION > –35 dBm [> 60 dB Note 1] BAND FCC ID: IC:
135 UIPSQ135M150 6772A-SQ135M150
BLOCKING OR DESENSITISATION > –17 dBm [> 78 dB Note 1]
220 UIPSQ215M141 6772A-SQ215M141
SPURIOUS RESPONSE REJECTION > –32 dBm [> 63 dB Note 1]
400 UIPSQ400M1311 6772A-SQ400M1311
MODEM 12.5 kHz (Note 3) 15 kHz 25 kHz 30 kHz 50 kHz 100 kHz
450 UIPSQ450M140 N/A
GROSS DATA RATE 700 UIPSQ757M160 N/A
220, 400, 700, 896, 220, 400, 450, 135, 220, 400, 700, 896, 896 UIPSQ896M141 6772A-SQ896M141
BANDS 135 220 700 135 700
450 928 896, 928 896, 928 928 928 UIPSQ928M141 6772A-SQ928M141
256 QAM 72 kbit/s 80 kbit/s 72 kbit/s 80 kbit/s 128 kbit/s 160 kbit/s 128 kbit/s 288 kbit/s 320 kbit/s 576 kbit/s EMC FCC CFR47 Part 15, EN 301 489-5, ICES-003
64 QAM 54 kbit/s 60 kbit/s 54 kbit/s 60 kbit/s 96 kbit/s 120 kbit/s 96 kbit/s 216 kbit/s 240 kbit/s 432 kbit/s SAFETY UL / EN 60950, Class 1 division 2 for hazardous locations
16 QAM 36 kbit/s 40 kbit/s 36 kbit/s 40 kbit/s 64 kbit/s 80 kbit/s 64 kbit/s 144 kbit/s 160 kbit/s 288 kbit/s ENVIRONMENTAL ETS 300 019 Class 3.4, IEEE 1613 Class 2
IEC 61850-3, Ingress Protection IP51
QPSK 18 kbit/s 20 kbit/s 18 kbit/s 20 kbit/s 32 kbit/s 40 kbit/s 32 kbit/s 72 kbit/s 80 kbit/s 144 kbit/s
Notes:
4-CPFSK 9.6 kbit/s 9.6 kbit/s 9.6 kbit/s 9.6 kbit/s 19.2 kbit/s 19.2 kbit/s 19.2 kbit/s 38.4 kbit/s 38.4 kbit/s 76.8 kbit/s
1. The receiver figures are shown in typical fixed interference dBm values and dB values [in brackets] relative to the sensitivity.
FORWARD ERROR CORRECTION Variable Reed Solomon plus convolutional code Relative values are given for QPSK modulation and max coded FEC. Refer to the Aprisa SR+ User Manual for a complete list
of modulation and coding levels.
ADAPTIVE BURST SUPPORT Adaptive Coding and Modulation 2. Please consult 4RF for availability.
3. The gross data rate for the 12.5 kHz channel size varies with regulatory compliance.
4. The 450 MHz and 700 MHz bands are only available for FCC.
5. The receive tuning range is specified. The transmit tuning range is 896 - 960 MHz.

ABOUT 4RF
Operating in more than 150 countries, 4RF provides radio communications Copyright © 2024 4RF Limited. All rights reserved. This document is protected by
equipment for critical infrastructure applications. Customers include copyright belonging to 4RF Limited and may not be reproduced or republished in
utilities, oil and gas companies, transport companies, telecommunications whole or part in any form without the prior written consent of 4RF Limited. While For more information please contact
operators, international aid organisations, public safety, military and every precaution has been taken in the preparation of this literature, 4RF Limited EMAIL [email protected]
security organisations. 4RF point-to-point and point-to-multipoint assumes no liability for errors or omissions, or from any damages resulting from the URL www.4rf.com
products are optimized for performance in harsh climates and difficult use of this information. The contents and product specifications within it are subject
terrain, supporting IP, legacy analogue, serial data applications. to revision due to ongoing product improvements and may change without notice.
Made in USA from local and imported parts. Mirrored Bits® is a registered trademark of Schweitzer Engineering Laboratories, Inc.
Version 3.1.0
Aprisa and the 4RF logo are trademarks of 4RF Limited.