Scribd
Upload
3K views12 pages

v519 Scanner Diagnostic Tool Manual

Manual scaner v 519

Uploaded by

amadeu.renato1
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
3K views12 pages

v519 Scanner Diagnostic Tool Manual

Manual scaner v 519

Uploaded by

amadeu.renato1
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 12

Manuals+ — User Manuals Simplified.

OBD2 V519 Scanner Diagnostic Tool User Manual

Home » OBD2 » OBD2 V519 Scanner Diagnostic Tool User Manual

Contents
1 OBD2 V519 Scanner Diagnostic Tool
2 Product introduction
3 Notes
4 Introduction to product Appearance and function
keys
5 Product parameters and accessories
6 Automobile inspection
7 Menu Page Introduction
8 Disclaimer
9 Documents / Resources
9.1 References

OBD2 V519 Scanner Diagnostic Tool


Product introduction

V519 is a multi-functional vehicle fault diagnosis instrument that supports nine OBD Il/EOBD standard protocols. It
supports plug and play, can quickly read the vehicle fault information and vehicle parameters. It is a more
comprehensive fault diagnosis instrument. Please read the product manual carefully before using this product.
Thank you.

Notes

1. Do not use abrasive cleaners to clean this product.


2. Do not allow this product to be heated or close to fire sources.
3. Do not expose the product to direct sunlight for a long time.
4. Do not attempt to disassemble this product to make any modifications, as it does not contain any repair
components.
5. Do not use this product in the rain.
6. If you do not plan to use this product for a long time, please store it in a dry environment to avoid extreme
temperatures and dust.

Introduction to product Appearance and function keys


Product Description

1. Product connecting line, used to connect vehicle OBD interface


2. 2.8-inch colour display screen, resolution: 240*320
3. Read the current fault code quickly
4. I/M ready state
5. Back/Exit
6. 6/7/8/9 Up, down, left and right buttons
7. Confirmation
8. Software upgrade/printing interface
9. The fault code is read
10. The connection fails
11. The connection is successful

Product parameters and accessories

Product parameters

Working voltage: DC 9-16V


Operating current: 48~72mA
Operating environment: – 20~65 C
Storage temperature: -30 ~ 70 C
Overall dimensions: 155*87*24mm

Product fittings

fittings
host *1
Instructions *1

Support Agreements

1. SAE J1850 PWM (41.6Kbaud)


2. SAE J1850 VPW (10.4Kbaud)
3. ISO 9141-2(5 baud init, 10.4Kbaud)
4. ISO 14230-4 KWP (5 baud init, 10.4 Kbaud)
5. ISO 14230-4 KWP (fast init, 10.4 Kbaud)
6. ISO 15765-4 CAN (11bit ID, 500 Kbaud)
7. ISO 15765-4 CAN (29bit ID, 500 Kbaud)
8. ISO 15765-4 CAN (11-bit ID, 250 Kbaud)
9. ISO 15765-4 CAN (29bit ID, 250 Kbaud)

Main functions

1. Support nine OBD II/EOBD standard protocols


2. Read the automobile engine fault code
3. Clear engine fault code
4. Vehicle fault freeze frame
5. I/M ready state
6. Vehicle information
7. Automobile data flow
8. Battery voltage reading
9. Mode 6 detection
10. Oxygen sensor test
11. Mode 8 detection
12. Fault code query
13. Playback function
14. Print function
15. Support ten languages: English, German, French, Spanish, Italian Russian, Dutch, Chinese, Japanese,
Portuguese

Automobile inspection

Find the special OBD interface for cars. The positions of OBD interfaces of different models are different (usually
located in the inner panel at the lower left of the instrument panel, that is, above the accelerator pedal. For other
models, see the figure below) Start the vehicle after insertion
Menu Page Introduction

Test main menu


After connecting the vehicle, enter the main page, select the “Diagnosis” menu, and press the OK key to enter the
test function page. This menu has 9 test functions, and you can use the direction function kevs to move and
select

Code reading

Select the code reading function, and the product will diagnose the automobile engine system
If the vehicle has an engine fault, the engine fault code and fault definition will be read
If there are multiple fault codes, you can use the up, down, left and right buttons to turn pages
Procc OK/-XIT to roturnI

Clear code
Select “Clear Code” and a confirmation message will appear. After confirming that the fault code is cleared, the
vehicle engine fault light
will go out and the code is cleared successfully If the clearing fails, it can be cleared when the engine is
powered off

Freeze frame

Freeze frame refers to the snapshot data automatically recorded by the automobile computer when the
emission system has a fault code, which is a good function to help determine the cause of the fault

I/M ready state

The I/M ready function is used to check whether the car monitor is OK or NIA. During specific driving time,
each monitor has specific driving conditions and required time
OK means the monitoring test is completed
INC indicates that the vehicle has not completed monitoring
N/A means that the modified vehicle does not support this monitoring
Vehicle information
The vehicle identification code and other information can be viewed after entering the vehicle information

Data stream
After entering the data stream, the product will read the current real-time data stream information of the
automobile engine

Mode 6

Select mode 6 to enter on-board monitoring test

Enter the sensor monitoring interface

Oxygen sensor test


When entering the oxygen sensor test item, the oxygen sensor value of the tested vehicle will be read to
determine whether the various test data are normally
Mode 8

Mode 8 component test project

Query the fault code library

Enter the query fault code option, the user can use the direction keys to adjust the fault code, turn to the fault
code to be queried and select “OK” to query the fault definition
Playback

Enter the playback option to view the fault code playback record and data stream playback record

Voltage
Enter the voltage option to read the current battery voltage data of the detected vehicle

Settings
Enter the setting option to adjust the language, unit and other settings of multiple product parameters

Software upgrade
Software Upgrade Procedure

1. Log in to “elm327. com” to download “V519ProductTool”


2. After successful download, use a Type-C data cable to connect the product and computer
3. Double click to run “V519ProductTool”
4. Select Update Firmware
5. Select “Start update” and wait until the upgrade is successful

Print
Software Upgrade Procedure

1. Log in to “elm327. com” to download “V519Product Tool”


2. After successful download, use a Type-C data cable to connect the product and computer
3. Double click to run “V519ProductTool”
4. Select “Review Datastream”
5. After successful reading, the vehicle data stream information will be displayed, which can be copied for printing

Notes
The product is not compatible with new energy vehicles, hybrid vehicles, and vehicle types that do not conform to
the OBD2 agreement

Disclaimer

We are committed to providing customers with unparalleled customer support before and after-sales. Here are our
exemption conditions for products:
If any of the following conditions are met, the customer shall not enjoy the policy within the scope of this limited
warranty :

a) Abnormal use, abnormal conditions, improper storage, exposure to humidity or unauthorized modification,
misuse, negligence, abuse, accident, change, improper installation or other non-fault behaviours, including
damage caused by transportation.
b) Our company will not be responsible for the product damage caused by external reasons (such as collision
with objects) or fire, flood, sand, dust, storm, lightning, earthquake or weather conditions, acts of God
irresistible or battery leakage, theft, fuse breaking, incorrect use of any power supply

Documents / Resources
OBD2 V519 Scanner Diagnostic Tool [pdf] User Manual
V519 Scanner Diagnostic Tool, V519, Scanner Diagnostic Tool, Diagnostic Tool

References

User Manual

Manuals+, Privacy Policy

You might also like