ROSENBAUER RAPID INTERVENTION VEHICLE

SPECIFICATION With Spare Parts & Accessories

MODEL RIV 1120/90/30
The ROSENBAUER Rapid Intervention Vehicle (RIV) vehicle is a special airport fire-fighting vehicle
to offer effective protection in high fire risk areas, like Airports, Heliports, Oil terminals and
Military Installations and will meet the ICAO recommendations in respect of all performance
criteria. The vehicle is capable of operating in desert terrain at high ambient temperatures and
in a salt laden, highly humid climate. Thanks to its all- wheel drive capability the vehicle has a very
good cross-country performance. This vehicle has been engineered and will be fabricated and
tested in accordance with the American (for chassis), German (DIN), Austrian (ÖNORM) and
internal Rosenbauer standards and specifications. All components of this vehicle are made of
approved products, steadily improved and developed. This is the guarantee for absolute
reliability and safety in performance.

Similar picture – not binding

ROSENBAUER INTERNATIONAL AG reserves the right of alterations and modifications due to technical
progress and/or improvements. ROSENBAUER INTERNATIONAL AG cannot be held responsible for
changes in the chassis programs of the chassis manufacturers.
Drawings and photographs may show optional equipment available at extra charge and may exclude
standard equipment.
CHASSIS: CHASSIS / ENGINE / TRANSMISSION / SUSPENSION /
BRAKES / EXHAUST / FUEL TANK

Type: Ford F-550 with Cab 4x4, 2 door

Standard XL-trim execution
19500 lbs (8845 kg) GVWR
Year: 2024 model year

Engine: 6,7L 4-Valve V8 Turbo Diesel

330 hp at 2600 rpm

Cooling
System: Heavy-duty cooling system for GCC areas

Fuel tank: 40 gallons tank

Exhaust
System: Fitted with standard exhaust system

Gearbox: TorqShift automatic gearbox

6 forward and 1 reverse gears

Steering: Power steering, left hand steering.

Drive: 4x4

Wheelbase: 169”

Front axle: 7.500 lbs (3400 kg) capacity

Rear axle: 14.700 lbs (6668 kg) capacity

Tyres: Front: single, LT 225/70R19.5 – All Terrain

Rear: double, LT 225/70R19.5 – All Terrain

Brakes: 4-wheel ABS brake system, disc brakes,

parking brake

Suspension: Leaf type springs, shock absorbers, stabilizer

bar, on front and rear axle

Rear
Protection: Rear undercarriage protection bar will be fitted

steering: Power steering, left hand steering.

 Electrics: 12 volt, dual headlights, turn signal switch,
intermittent windshield wiper switch, parking
lights with front turn signal and rear tail light,
hazard switch.
2 front fog lights, one rear fog light
One 12 volt, 750CCA battery – 240-amp
alternator

Towing: 2 front and rear towing eyes

Accessories: Hydraulic jack, with tools for wheel changing.

One complete spare wheel will be delivered
loose.

Dimensions and
Weight: Length: approx. 7550 mm (with front mounted
monitor)
Width: approx. 2400 mm
Height: approx. 2500 mm (unladen)
Permissible
GVW: 19500 lbs (8845 kg)
Operational
weight: approx. 17235 lbs (7818 kg)
Shipping
weight: approx. 14330 lbs (6500 kg)

All weights and dimensions are approximate and may vary on

manufacture.

Vehicle
performance: Max. speed: approx. 130 km/h with full load
Acceleration: From 0 to 80 km/h within approx. 20 seconds
(according to ICAO requirement)

DRIVER`S CAB: Two door - regular cab, front two single seats, air conditioned,
all standard metric gauges, seat belts, sunvisors, dome light,
AM/FM electronic clock/stereo and all standard equipment in
accordance with Ford Motor specification.

Control box: A separate control box, holding all controls and

switches for the Public Address System, is
dashboard mounted within easy reach of the
driver or co-drivers.
 Fire fighting
Panel: Located between driver and co-driver, there is a
control panel for the fire fighting operations, with
all controls within easy reach of the operator.
This panel comprises:

* Control including pilot lamp for rotating

beacons and electronic siren on/off
* Pilot lamp for open roller shutters and doors
* Combined start/stop switch for pump engine
* Throttle control
* Control for water tank suction valve
* Control for foam tank suction valve
* Water tank level indicator
* Foam tank level indicator
* Normal pressure manometer

BODY
CONSTRUCTION: Rosenbauer Efficient Technology (ET) design.

The versatile superstructure consisting of self-supporting bonded

& bolted laser cut aluminum sheets combined with aluminum
extrusion profiles as well as lightweight aluminum honeycomb
core sheets.

This steady, unique lightweight design offers a lower centre of

gravity which consequently shall boost both, driving convenience
and safety. It also provides easy and safe access to the
equipment which is stored in the locker compartments.

Roof surface will be painted with anti-slippery coating

Side storage lockers will be closed by dust- and water proof light-
alloy roller shutters (two on each side). Provided with suitable
ventilation openings and water drainage. Rear compartment will
be closed by a top hinged door. Automatic interior illumination
(LED) when opening a side roller shutter or the rear shutter.
Brackets for the equipment which will be delivered with the
vehicle.
Steps or ladder for access to roof are fitted in the rear on the R/H
 Similar picture – not binding

WATER TANK: Capacity: 1000 l

Material: It is made of high quality polypropylene material,

absolutely corrosion proof.

Mounting: The tank is fastened elastically on an auxiliary frame

by means of conical bearings. This frame itself is
mounted on the chassis frame.

Equipment: - Manhole with quick action cover release and

excess pressure safety device
- Overflow system with pressure and vacuum
release
- Tank drain with ball type valve
- Electric tank level indicator "Fludometer"
- Anti-swirl plates prevent a funnel formation
during suction operation

- One hydrant filler inlet, on the R/H side, with 2

½ " male coupling and female blank cap and
equipped with a valve, strainer and non- return
valve

FOAM COMPOUND
TANK: Capacity: 120 l
Location: The tank is integrated in the water tank
 Material: It is made of high quality polypropylene material,
absolutely corrosion proof.

Equipment: - Fillerhole
- Overflow system with pressure and vacuum
release
- Electric tank level indicator "Fludometer"
- Suction line to the foam proportioning
system, with ball type valve.
- One tank filling and flushing line with Storz D
coupling and equipped with a ball type valve

PUMP: Rosenbauer pump FOX 4, made of light alloy, normal pressure

centrifugal pump with pump mounted control panel.
Drive: By separate BRP-Rotax gasoline engine for full
pump and roll operation at any driving speed
and direction, with electric starter actuated from
the cab.

Discharge
rate: 1650 l/min. at 10 bar (at water tank suction
operation)
Priming: Self-priming by double piston pump. Automatic
priming system.

Connections: 1 suction inlet 4 " BSRT, rear side facing

2 normal pressure outlets 2 ½ ", each one drawn
out to the L/H and R/H side

Piping: Water: hot dipped galvanized steel

Foam
compound: stainless steel or polypropylene

Couplings: according to BS 336 : 1989, made of light alloy

CONTROL PANEL
FOR PUMP: Location: In the pump compartment. The control panel is
of waterproof design.

Comprising: * Normal pressure manometer

* Manovacuummeter
* Water tank level gauge "Fludometer"
* Foam compound tank level gauge
"Fludometer"
* Pilot lamp “pump engaged”
 Similar picture – not binding

FOAM PROPORTIO-
NING SYSTEM: ROSENBAUER automatic "around the pump" foam proportioning
system RVM 80 (manual adjustable 3 % and 6
%), all time constant independent of discharge, complete with the
following connections:
One valved suction line to the foam compound tank.
One valved external suction and flushing line, with Storz D, fixed
and blind coupling in brass, for suction operation from external
supply.

QUICK ATTACK
INSTALLATION: 1 x 30 m normal pressure hose (25 mm Ø), mounted on a hose
reel on the R/H side, electrical rewind system with reliable drum
brake, with Rosenbauer SelectFlow nozzle.

Similar picture – not binding

DRY POWDER UNIT: Capacity: Filled with 90 kg BC foam compatible powder,
located in the rear storage locker, working
pressure 12 - 13 bar
Inert gas: 1 x 25 l nitrogen cylinder (200 bar), pressurizing time
of container between 8 and 10 seconds. (The
25litre tank is enough for the 250kg of powder as per
Rosenbauer design and recommendations, there is no
need for a 45litre tank)
One spare cylinder will be delivered loose.
Hose: One lay flat, electrical conductive powder hose,
30 m long, 32 mm internal diameter, provided
with light alloy Storz-C type couplings with safety
pins. The hose is stored in a hose cassette. The
end of the hose is fitted with a trigger operated
powder nozzle.
Output: 2,5 kg/sec.
Throw range: approx. 8 m at still air.

CARBONDIOXIDE (CO2)
EXTINGUISHING
UNIT: System: The CO2 extinguishing unit consists of high
pressure steel cylinder, manufactured in
accordance with DIN 4664, holding 30 kg of CO2.
The filling factor of the cylinders is chosen to suit
hot regions. The cylinders has a volume of 40
litres and is tested at 250 bar. The cylinders are
provided with individual quick opening valve with
safety bursting disc.
Hose: One non-collapsible electric conductive hose, 30
m long, 13 mm internal diameter, stored on a
manual rewind hose reel.
Snow horn: The end of the hose is fitted with a valved
extinguishing nozzle or snow horn. Output of the
nozzle is approx. 1,0 kg/sec., the throw range is
approx. 2 - 3 m.

ELECTRICAL
EQUIPMENT: Traffic installation as per national regulation, 12 V
Reverse warning buzzer.
1 officer's spotlight, dashboard mounted
Surrounding illumination system (2 LED lights on each side,
mounted on the roof of superstructure)
1 light bar with rotators (blue) on top of the cabin roof.
1 yellow air traffic warning rotating beacon
1 electronic "wail-yelp" siren with control panel (PA300),
incorporated Public Address System and 100 W loudspeaker.
 Radio preparation with antenna.
Electrical cable winch bumper mounted (50kN, 30 m rope, cable
remote control)
LIGHT MAST: One pneumatic telescopic light mast, extendable up to approx. 5
m above ground level, is fitted into the body of the vehicle.
Manual rotation. 2 x 100 W/12 V floodlights, power supply by the
12 V chassis electrical system.

GENERATOR: As per Rosenbauer design and recommendations; there is no

space left to accommodate a generator; in addition; the Light
Mast is running on 12 volts chassis electrics. It is not possible
to fit inside the truck; furthermore; the Generator is not
needed for this type of truck,

PAINTING: Cab and superstructure: fire red as per Ford standard

(Similar to darker fire red as per RAL
3000)
Frame and rims: black RAL 9005
Front bumper Ford standard
Rust protection: During all stage of production for use
in a salt laden, high humidity
atmosphere.

DOCUMENTATION: 2 sets of instruction books for Ford chassis

1 sets of operation/service manuals and spare parts
catalogues for superstructure and fire fighting installation.
All manuals are in English language.
All instructions are in English language where pictographs do
not serve the purpose.
 ROSENBAUER RAPID INTERVENTION VEHICLE Equipment list
0010
LUKAS COMBINATION TOOL SC 258 E3
Technical Data:
EN cutting class: F
EN Cutting capacity: 1G-2F-3F-4F-5G
NFPA cutting classes: A6, B6, C6, D7, E7, F4
Round steel up to: 26 mm
Cutting force up to: 280
kN Protection class: IP
58
Spreading force 25 mm inward tip: 32 kN
Spreading force up to: 700 kN
Spreading distance: 321
mm Pulling force up to: 34
kN Pulling distance: 330
mm
Dimensions: 792 x 210 x 253 mm
Weight: 14,4 kg
1,00 pc

0020
LUKAS BATTERY CHARGER 12/24 V FOR EWXT TOOL
1,00 pc

0030
LUKAS 9 AH LI-IOB BATTERY

2,00 pc

0040
EXTENSION LADDER - 2 SECTIONS 10
M ACCORDING TO EN1147, ON F4047
Certified as to EN 1147 and Austian Standard ON F 4047. Aluminium heavy-duty extension ladder.
Especially designed for fire fighting and rescue operations. Comes with special rope brake for more
safety and special slides for easy pulling.
Comes with:

- 2 sections
- rope pull with rope brake
- setting up assistance with 2 spikers at the bottom for enhanced stability
- wall rubber castors
- automatic ladder locks
- slip resistant rungs
The ladder may be used by two persons with a maximum weight up to 216 kg.
Transportation dimensions: 5,93 x 0,47 x 0,16 m.
Weight: 41 kg.
 1,00 pc

0050
CROWBAR 1000MM LONG
1,00 pc

0060
BOLT
CUTTER 600
MM LONG
Cuts wire, bolts, rivets, bars and nails with a hardness of max. 150 kg/mm², up to 10 mm diameter.
Insulated rubber grips. Weight: 3.5 kg.
Head and scissor blades made of special steel.
1,00 pc

0070
DIGGING SHOVEL
Forged steel blade, round point with turned step. Beechwood handle, 1,600 mm long. Weight: 2.4 kg.
1,00 pc

0080
ACCU RECIPRO SAW MILWAUKEE M 18 FSX-121
C SET
Product description:
• Cordless reciprocating saw for cuts like with a cable machine - 150 cuts in 290 x 45 mm soft
wood with one battery charge (12.0 Ah)
• Latest generation of the brushless POWERSTATE ™ motor with more copper and
stronger magnets than the previous model
 • The new REDLITHIUM-ION ™ High Output ™ 12 Ah battery offers advanced electronics and an
almost loss-free transmission of electricity - this means a significantly longer runtime compared to
the previous Milwaukee® battery technology
• The new REDLINK PLUS ™ electronics offer advanced, digital overload protection for the
machine and battery and keep the performance constant under load
• By means of optimized movement sequences, cuts are cleaned of residues and thus allow
faster work progress with wooden materials
• A maximum stroke rate of 3000 min-1 and a stroke of 32 mm enables quick and effortless cuts in
a variety of materials
• 5 adjustable cutting speeds from 1500 - 3000 strokes for ideal processing of the material to be cut
• FIXTEC saw blade quick-change system
• Metal hook for easy and safe hanging of the device
• Optimum use of the leaves thanks to the adjustable shoe
• Compared to other Li-Ion technologies and / or previous Milwaukee® battery technology. The
result depends on the voltage, device and application
Equipment cordless reciprocating saw M18 FSX-121C
• Li-ion battery
• Battery capacity (Ah) 12.0
• Number of batteries supplied 1
• Delivered in a transport case
• Weight with battery (kg) 5.5
• Stroke length (mm) 32
• Charger (charging time) 130 min
• Number of idle strokes (min-1) 0 - 3000
• Max. Cutting depth in aluminum (mm) 25
• Max. Cutting depth in non-ferrous metal (mm) 25
• Max. Cutting depth in metal pipes (mm) 150
• Max. Depth of cut in steel (mm) 20
• Max. Cutting depth in softwood (mm) 300
• Voltage (V) 18
• Standard equipment / scope of delivery reciprocating saw blade
1,00 pc

0090
BLADES EXTRICATION SET IN
BAG 4 X 150MM + 6 X 230MM
1,00 set
0100
STRETCHER TWICE-FOLDABLE

- Stretcher according to DIN 13024 K made of ultraCHEM fabric.

-
- ultraCHEM: Chemical fiber fabric, Highly tear-resistant and impactresistant,
- Waterproof disinfectable,
-
- 2x foldable, with 4 slide feet.
-
- Robust, easy, proven
-
- All stretchers own:
- - Small stowage / pack size
- - Aluminum base frame
- - Integrated pillow bag
- - Solid lockable steel hinges for folding
- - Two adjustable straps with quick closure for secure fixation of the
injured. WxHxL: 556 mm / 137 mm / 2.302 mm
Weiht: 7,5 kg
1,00 pc

0110
ALUMINIUM BLANKET
Insulating rescue blanket, NASA type. Protects injured people against heat or cold and prevents
shock. Weight: 0.55 kg
2,00 pc

0120
PROTECTIVE JACKET FIRE FIT 2
5 CM/7,5CM YE/SI/YE STRIPING, COLOUR: NAVY BLUE

Certified as to EN 469:2020 (highest performance level X2, Y2 and Z2)

and EN 1149-5
This garment is only one part of a combined protective clothing acc. to
EN 469

Material:
* Outer fabric: the outer shell is made of flame- and heat resistant
Nomex Tough, 195 g/m², which consists of 75% Nomex, 23% Kevlar and 2%
Carbon (prevents electrostatic charges)
* Breathable membrane made of PU laminated fabric. This membrane
also acts as a vapour barrier, protecting the fireman during
extinguishing operations, approx. 150 g/m²
* Lining is made of quilted Nomex, non-woven, with a
Nomex/Viscose blend covering, in a 270 g/m² material
Remarks:
 * Comfortable, ergonomic designed protective jacket with high protection
* Special designed sleeves for more freedom of movement
* Arm and jacket seams with moisture blocker made of flame
retardant Polyurethan coated aramid, therefore better protection
against the penetration and soaking of water (anti-wicking barrier)
* Highly resistant zipper with double cover flap
* Flame protection collar can be pulled up under the helmet
* Sleeves width can be adjusted individually due to Velcro
* Sleeves with innovative NOMEX® knitted wristlet with thumb hole
* Due to a special construction it´s not possible do pull through
the wristlet during slip in the jacket sleeves
* Radio pockets on left side
* With two side pockets with flap; under right side pocket flap with
strap and push button for attaching a carabine (not scope of
delivery)
* 15 x 2.5 cm fleece strip above left radio pocket for attaching a
name strip
* Holding loop for manual microphone on left
* jacket with 5 cm wide and 7,5 cm wide yellow/silver/yellow
reflective stripes around torso, around sleeves with 7,5 cm
wide yellow/silver/yellow reflective stripes, additional with 5
cm wide yellow/silver/yellow reflective stripes vertically on the
front side
* Backside length 85 cm (size 52-54C)

Sizes: 40-42 to 66-70 each in lengths A (body size 156-164 cm), B (body
size 164-172 cm), C (body size 172-180 cm), D (body size 180-188 cm)
and E (body size 188-196 cm)

Accessoires:

* 1405966 name strip

Lettering two line high on the back
* 140949 printed directly on the jacket
* 140948 Lettering fixed on a hook an pile fastener 10 x 45 cm

* 14059922 Pile tape suitable for affixing a 10 x 45 cm

lettering Weight: 1.55 kg (size 48-50C)

2,00 pc

0130
 PROTECTIVE TROUSERS FIRE FIT 2
5CM/ 7,5CM YE/SI/YE STRIPING, COLOUR NAVY BLUE

Certified as to EN 469:2020 (highest performance level X2, Y2 and Z2)

and EN 1149-5

This garment is only one part of a combined protective clothing acc. to

EN 469

Material:

* Outer fabric: the outer shell is made of flame- and heat resistant
Nomex Tough, 195 g/m², which consists of 75% Nomex, 23% Kevlar and 2%
Carbon (prevents electrostatic charges)
* Breathable membrane made of PU laminated fabric. This membrane
also acts as a vapour barrier, protecting the fireman during
extinguishing operations, approx. 150 g/m²
* Lining is made of quilted Nomex, non-woven, with a
Nomex/Viscose blend covering, in a 270 g/m² material

Remarks:

* Comfortable, ergonomic designed protective trousers with

high protection
* 5 cm wide fixed suspenders
* Elastic waistband for perfect adjustment
* Trousers seams with moisture blocker made of flame retardant
Polyurethan coated aramid, therefore better protection against
the penetration and soaking of water (anti-wicking barrier)
* Fly with zipper and Velcro fastener covered by flap
* Two side pockets with flap, lower side of pocket with pleat
* 15 x 2.5 cm fleece strip for name strip on left side pocket flap
* Ergonomically shaped knees with reinforcements made
of flame-retardent, silicon-carbon coated paraaramid
fabric
* Sewn-in knee pads made of water repellant cellulose rubber
* trousers with 5 cm wide and 7,5 cm wide
yellow/silver/yellow reflective stripes around legs

Sizes: 42-44 to 66-70 each in lengths A (body size 156-164 cm), B (body
size 164-172 cm), C (body size 172-180 cm), D (body size 164-172 cm)
and E (body size 188-196 cm)

Weight: 1.33 kg (size 48-50 C)

0140
SIGMA 2 WITH PROMASK FULL FACE MASK
 Sigma 2 Type 2’s proven durability, reliability and appeal is confirmed
by an extensive user base who demand a combination of maximum performance
and true operational simplicity.
Proven high performance pneumatic system Compact first breath activated
demand valve with bypass Ergonomically designed lightweight backplate and type
2 harness Kevlar
* blend flame retardant webbing with Kevlar cylinder band
* Corrosion resistant Nickel plated components
* Simple operation for users
* All components are user serviceable, low cost and easy to maintain
* Will accept wide range of 200 and 300 bar cylinders
* Approved to the MED as a Type 2 set

2,00 pc

0150
COMPRESSED-AIR CYLINDER 6 L/300 BAR MADE OF
STEEL WITH VTI-VALVE EMPTY

0160
UNIVERSAL TOOL BOX, 45-PIECES
Consisting of following 1/2" tools:

- 13 Sockets 8-24 mm
- 2 Special spark plug sockets for 16 and 21 mm
- 1 Ratchet
- 1 Universal joint, 2 extensions, made of chrome vanadium
- 1 Hickory hammer
- 1 Combination pliers 175 mm
- 1 Water pump pliers
- 2 Screwdrivers for recessed-head screws, PH 2 x 100, PH 2 x 38 mm
- 4 Screwdrivers 4 x 75, 5 x 100, 6 x 38.8 x 150 mm
- 4 Allen keys of 5, 6, 8 and 10 mm
- 12 ring/flat spanners, 6-19 mm
Dimensions (LxWxH): 450 x 290 x 110 mm
Weight: 6.3 kg
1,00 set
 PARTS FOR ROSENBAUER RAPID INTERVENTION
VEHICLE on Ford F550

Detailed list will be provided after final technical clearance!

0100

Set of bulbs and fuses 12 V

Consists of
0100.0010 022055 2,00 pc
Bulb 12 V DC 55 W, form H 1
0100.0020 022056 2,00 pc
Halogen lamp H3 12V/55W - PF22S
0100.0030 523163 2,00 pc
Halogen lamp
12V/55W H7
0100.0040 022037 4,00 pc
Bulb 12V 2W
0100.0050 022036 4,00 pc
Bulb 12V 2W BA9S

0100.0060 022053 4,00 pc

Bulb combi
0100.0070 003107 4,00 pc
Bulb 12V/1,2W
0100.0080 022042 4,00 pc
Lamp
0100.0090 022007 4,00 pc
Soffitte 12 V/ 5 W
0100.0100 022043 4,00 pc
Direction indicator-brake light lamp combi
12V/ 15W BA15S 7533
0100.0110 005800 20,00 pc
Fuse 3 A
0100.0120 005812 20,00 pc
Fuse,5 A, plug in type
0100.0130 005813 20,00 pc
Fuse 7,5 A, plug in type
0100.0140 005814 20,00 pc
Fuse 10A , plug in type
0100.0150 005828 20,00 pc
Fuse 15 A, plug in type
0100.0160 005829 20,00 pc
Fuse 20A, plug in type
0100.0170 005830 20,00 pc
 Fuse 25A , plug in type
0100.0180 030431 10,00 pc
Strip fuse 25A
0100.0190 001740 10,00 pc
Strip fuse
0100.0200 030432 10,00 pc
Strip fuse 50A
0100.0210 039331 10,00 pc
Strip fuse
0100.0220 069441 4,00 pc
Relais w/diode 12V/ 20,30A W
0100.0230 524700-001 4,00 set
Fuse support

2,00 pc

0110

Service kit for Pump

Fox 4 Rosenbauer

Consists of
0110.0010 046454-001 10,00 pc
VALVE PLATE SIZE 100
0110.0020 074518-001 10,00 pc
INLET VALVE PLATE
0110.0030 014341 10,00 pc
O-ring 110 x 3 / B70
0110.0040 014265 10,00 pc
O-ring
24,00 X 3,00
0110.0050 898583 5,00 pc
AIR FILTER
0110.0060 899051 15,00 pc
Spark Plug Fox S / Fox 4
0110.0070 05169A 5,00 pc
Oilfilter
Fox S / Fox 4
0110.0080 05173A 5,00 pc
O-ring for Oilfilter
Fox S / Fox 4
0110.0090 046455-001 10,00 pc
Washer
0110.0100 085234 10,00 pc
Countersunk screw, philips head
0110.0110 015084 10,00 pc
Hex nut M5 DIN 985 steel galvanized

5,00 set

0130
Gasket kit for roller shutter
Consists of
0130.0010 023512-001 10000 MM 2,00 pc
Sealing profile
0130.0020 023514 20000 MM 2,00 pc
Slip-on profile
0130.0030 020098-001 10000 MM 2,00 pc
Sealing profile
PVC / ( 1 Coil = 100 m )
0130.0040 023496-001 10000 MM 2,00 pc
Padded joint
(1 COIL = APPROX. 100 M)
0130.0050 084088-002 10000 MM 2,00 pc
Sealing profile

2,00 pc

0140
Repair kit for roller shutter
Consists of
0140.0010 065038-002 2,00 pc
Locking device for bar
0140.0020 016085 4,00 pc
Pan head tapping screw
0140.0030 065017-001 4,00 pc
Slide stone lock
0140.0040 065014-001 4,00 pc
Locking sleeve
0140.0050 065057-001 4,00 pc
Spring 28x4,9x0,7
0140.0060 066110 2000 MM 2,00 pc
ROLLER SHUTTER MOUNTING BELT 20x1,6 (Coil = 100m)
0140.0070 015971 4,00 pc
Cylinder head screw M5 x 8 DIN912 A4
0140.0080 066289 4,00 pc
Washer A 5,3 DIN 6797 A2
0140.0090 072213-001 4,00 pc
INTERMEDIATE PIECE 1MM FOR LOCKING LEVER 1.4574
0140.0100 065057-002 4,00 pc
RETURN SPRING
0140.0110 065013-001 4,00 pc
SPRING ROLLER BEARING
0140.0120 523577-001 4,00 pc
Distance for spring roller
0140.0130 050992-001 2,00 pc
Catch diam. 45 mm, bores Ø 3,3 + 4,1 MM
0140.0140 003893-002 4,00 pc
KNURLED SCREW II A 20 / 1.0060 GVZ
0140.0150 002872 4,00 pc
Cylinder head screw M 6 x 12 / A4
0140.0160 017810 2,00 pc
Dowel pin 4X40 A2
(1 BOX = APPROX. 500 PIECES )
0140.0170 072213-002 4,00 pc
INTERMEDIATE PIECE 2MM FOR LOCKING LEVER 1.4574
0140.0180 005824 4,00 pc
Retaining ring waves
2,00 pc

0150
ROLLER SHUTTER SWITCH ASSEBLY KIT
4,00 pc
0160
Repair kit for hose reel

Consists of
0160.0010 027493-001 2,00 pc
hub of friction clutch
0160.0020 027508-001 4,00 pc
Friction lining
0160.0030 027617 4,00 pc
Disc spring
0160.0040 027939-001 2,00 pc
Friction disc
0160.0050 007028 2,00 pc
Slide bearing
0160.0060 027714-001 2,00 pc
Distance bush
0160.0070 046546 2,00 pc
Hydraulic-type lubricating nipple 90° F. H3
0160.0080 077620 2,00 pc
Retaining ring for shaft
0160.0090 022794-001 4,00 pc
Brake disc 10,5/70 s= 2 mm

0160.0100 026776 2,00 pc

Savety pipe collar
0160.0110 014305 4,00 pc
O-ring 50,17x5,33 B70
0160.0120 014417 2,00 pc
Retaining ring waves
0160.0130 014311 2,00 pc
O-ring 60x3
0160.0140 028931 2,00 pc
Retaining ring, bores
60 x 2 DIN 472 steel galv.

2,00 pc

0170
Gear motor
I=119:1 DC 12V
2,00 pc
0180
 LED light unit
12V, LxWxH= 520 x 18 x 11 mm
4,00 pc

0190
LED light unit
12V, LxWxH= 520 x 18 x 11 mm

0200
Work light
12-24V/10W-LED
4,00 pc

0210
Door contact switch
4,00

pc

0220
Working light, LED for near field
illumination Power Beam 2000 close range
4,00 pc
0230
Grease mobil SHC polirex 222

0240
Roller shutter
grease Barrel 250g
3,00 pc

0250
Grease,