Field Programmable

Oscillators

Description Features
SiTime offers a wide range of field programmable (FP) ◼ Support for 10 MEMS oscillator families
MEMS oscillators including simple oscillators, differential ▪ Low power (SiT1602, SiT8008, SiT8009)
oscillators, high temperature oscillators, precision TCXO, ▪ Ultra-performance (SiT8208, SiT8209)
VCXO and spread spectrum oscillators. These FP ▪ Ultra-performance differential (SiT9120, SiT9121, SiT9122)
devices support the same specifications and performance
▪ High temp (SiT1618, SiT8918, SiT8919, SiT8920,
as their factory-programmed counterparts.
SiT8921)
They enable engineers to experiment with different ▪ AEC-Q100 Automotive (SiT2024, SiT2025, SiT8924,
configurations and generate customized samples in SiT8925, SiT9025)
seconds for fast prototyping. ▪ SOT23 oscillator (SiT2001, SiT2002, SiT2018, SiT2019,
Figure 1 illustrates the simple programming setup SiT2020, SiT2021)
required for programming SiTime FP devices by using ▪ VCXO (SiT3807, SiT3808, SiT3809)
the SiT6100DK, a field programming kit. Refer to ▪ Spread spectrum (SiT9003, SiT9005)
SiT6100DK quick start guide and other documents for ▪ µPower (SiT1581)
more information. ◼ Wide variety of programmable options
For production volume, SiTime offers factory ▪ Frequency from 1 – 725 MHz
programming of its entire portfolio with the shortest lead ▪ Frequency stability from ±50 ppb to ±50 ppm
time available in the industry. ▪ Supply voltages of 1.8 V to 3.3 V
▪ Operating temperature up to 125°C and down to -55°C
Applications ▪ Package sizes for 1.5 x 0.8 to 7.0 x 5.0 mm x mm
◼ Generic samples in seconds for prototype builds ▪ Pull ranges from ±50 to ±3200 ppm
▪ Spread percentage from ±0.25% to ±2% or
◼ Experiment with different options for optimal
-0.5% to -4% (Spread spectrum only)
timing margin
▪ Rise/fall time from 0.25 ns to 40 ns
◼ Configure different drive strengths for best EMI and/or
◼ Pb-free, RoHS and REACH compliant
to drive larger loads
◼ Fast prototype builds

Figure 1. Field Programmable Software and Hardware

Rev 1.79 5 December 2024 www.sitime.com

Field Programmable Oscillators

Field Programmable Device In addition, the SiT8008BI-11--XXX-000.FP0000 can be

used for either SiT1602 or SiT8008 in the
Ordering Information
2.0 x 1.6 mm x mm package. The SiT1602 and the
A FP device works as a superset of its programmed SiT8008 share similar electrical specs and the same field
counterpart. In certain cases, it can also be mapped to programmable devices, but they support different
different programmed base products. frequencies.
As an example, SiT8008BI-71-XXX-000.FP0000 is a field Please see Supported Device column to determine
programmable device in the low power family. It comes in which product families can be programmed using the
the 2.0 x 1.6 mm package, and can be programmed to given FP part.
support different combinations of the following:
Contact SiTime for devices of your interest that are not
◼ Frequency: 1 MHz to 110 MHz with 6 decimal places covered here.
of accuracy
◼ Frequency stability: ±20 ppm, ±25 ppm, ±50 ppm
◼ Temperature range: -20°C to 70°C, -40°C to 85°C
◼ Supply voltages: 1.8 V or 2.5 V to 3.3 V
◼ Output drive strength: 8 different options for different
rise/fall time

Table 1. Field Programmable Devices ‒ MEMS XO[1]

Frequency Frequency Temp Package
Product Field Programmable (FP) Supported Signaling Range Stability Range Voltage Size Socket
Family Part Number Devices Type (MHz) (ppm) (°C) (V) (mm x mm) Card
SiT8008BI-71-XXX-000.FP0000 2.0 x 1.6 SiT6161DK

SiT8008BI-11-XXX-000.FP0000 2.5 x 2.0 SiT6161DK

SiT1602[2] ±20, ±25, -40 to 85,
SiT8008BI-21-XXX-000.FP0000 LVCMOS 1 to 110 3.2 x 2.5 SiT6165DK
SiT8008 ±50 -20 to 70 1.8-3.3 V
SiT8008BI-31-XXX-000.FP0000 5.0 x 3.2 SiT6160DK
Low Power SiT8008BI-81-XXX-000.FP0000 7.0 x 5.0 SiT6160DK
Single-Ended
Oscillator SiT8009BI-71-XXX-000.FP0000 2.0 x 1.6 SiT6161DK

SiT8009BI-11-XXX-000.FP0000 2.5 x 2.0 SiT6161DK

SiT8009 ±20, ±25, -40 to 85, 1.8 V,
SiT8009BI-21-XXX-000.FP0000 LVCMOS 115 to 137 3.2 x 2.5 SiT6165DK
±50 -20 to 70 2.5-3.3 V
SiT8009BI-31-XXX-000.FP0000 5.0 x 3.2 SiT6160DK

SiT8009BI-81-XXX-000.FP0000 7.0 x 5.0 SiT6160DK

SiT8208AI-21-XXX-000.FP0000 3.2 x 2.5 SiT6165DK

SiT8208 ±20, ±25, -40 to 85, 1.8 V,
SiT8208AI-31-XXX-000.FP0000 LVCMOS 1 to 80 5.0 x 3.2 SiT6160DK
±50 -20 to 70 2.5-3.3 V
Ultra-
Performance SiT8208AI-81-XXX-000.FP0000 7.0 x 5.0 SiT6160DK
Single-Ended SiT8209AI-21-XXX-000.FP0000 3.2 x 2.5 SiT6165DK
Oscillator
SiT8209 ±20, ±25, -40 to 85, 1.8 V,
SiT8209AI-31-XXX-000.FP0000 LVCMOS 80 to 220 5.0 x 3.2 SiT6160DK
±50 -20 to 70 2.5-3.3 V
SiT8209AI-81-XXX-000.FP0000 7.0 x 5.0 SiT6160DK

SiT9121AI-1B1-XXX000.FP0000 3.2 x 2.5 SiT6165DK

±20, ±25, -40 to 85, 2.5 V,
SiT9121AI-1C1-XXX000.FP0000 LVPECL 1 to 220 5.0 x 3.2 SiT6160DK
±50 -20 to 70 3.3 V
SiT9121AI-1D1-XXX000.FP0000 SiT9120[3] 7.0 x 5.0 SiT6160DK

SiT9121AI-2B1-XXX000.FP0000 SiT9121 3.2 x 2.5 SiT6165DK

±20, ±25, -40 to 85, 2.5 V,
SiT9121AI-2C1-XXX000.FP0000 LVDS 1 to 220 5.0 x 3.2 SiT6160DK
±50 -20 to 70 3.3 V
High
Performance SiT9121AI-2D1-XXX000.FP0000 7.0 x 5.0 SiT6160DK
Differential SiT9122AI-1B1-XXX000.FP0000 3.2 x 2.5 SiT6165DK
Oscillator
±20, ±25, -40 to 85, 2.5 V,
SiT9122AI-1C1-XXX000.FP0000 LVPECL 220 to 625 5.0 x 3.2 SiT6160DK
±50 -20 to 70 3.3 V
SiT9122AI-1D1-XXX000.FP0000 7.0 x 5.0 SiT6160DK
SiT9122
SiT9122AI-2B1-XXX000.FP0000 3.2 x 2.5 SiT6165DK
±20, ±25, -40 to 85, 2.5 V,
SiT9122AI-2C1-XXX000.FP0000 LVDS 220 to 625 5.0 x 3.2 SiT6160DK
±50 -20 to 70 3.3 V
SiT9122AI-2D1-XXX000.FP0000 7.0 x 5.0 SiT6160DK

Notes:
1. Revision number which is placed right after SiTXXXX in the part number is fixed and not programmable. For instance, SiT8008A cannot be
programed to SiT8008B.
2. SiT8008 FP devices are used to program SiT1602 part numbers. Excluding family, SiT8008 and SiT1602 also share the same orderi ng codes.
3. SiT9121 FP devices are used to program SiT9120 part numbers. Excluding family, SiT9121 and SiT9120 also share the same orderi ng codes.

Rev 1.79 Page 2 of 7 www.sitime.com

Field Programmable Oscillators

Table 1. Field Programmable Devices ‒ MEMS XO[4] (continued)

Frequency Frequency Temp Package
Product Field Programmable (FP) Supported Signaling Range Stability Range Voltage Size Socket
Family Part Number Devices Type (MHz) (ppm) (°C) (V) (mm x mm) Card

SiT8920BM-71-XXX-000.FP0000 2.0 x 1.6 SiT6161DK

1 to 110
SiT8920BM-11-XXX-000.FP0000 2.5 x 2.0 SiT6161DK
SiT1618[5] Refer “Supported -40 to 105,
±20, ±25, 1.8 V,
SiT8920BM-21-XXX-000.FP0000 SiT8918[6] LVCMOS Frequencies” tables in -40 to 125, 3.2 x 2.5 SiT6165DK
SiT8920 ±30, ±50 2.5-3.3 V
SiT1618, SiT8918 and -55 to 125
SiT8920BM-31-XXX-000.FP0000 SiT8920 5.0 x 3.2 SiT6160DK
High datasheets
SiT8920BM-81-XXX-000.FP0000 7.0 x 5.0 SiT6160DK
Temperature
Single-Ended
SiT8921BM-71-XXX-000.FP0000 2.0 x 1.6 SiT6161DK
Oscillator
115.194001 to 137
SiT8921BM-11-XXX-000.FP0000 2.5 x 2.0 SiT6161DK
-40 to 105,
SiT8919[7] Refer “Supported ±20, ±25, 1.8 V,
SiT8921BM-21-XXX-000.FP0000 LVCMOS -40 to 125, 3.2 x 2.5 SiT6165DK
SiT8921 Frequencies” tables in ±30, ±50 2.5-3.3 V
-55 to 125
SiT8919 and SiT8921 5.0 x 3.2 SiT6160DK
SiT8921BM-31-XXX-000.FP0000
datasheets
SiT8921BM-81-XXX-000.FP0000 7.0 x 5.0 SiT6160DK

1 to 110 -40 to 85,

±20, ±25, -40 to 105, 1.8 V, 2.9 x 2.8
SiT2024BM-S1-XXX-000.FP0000 SiT2024 LVCMOS Refer “Supported SiT6165DK
±30, ±50 -40 to 125, 2.5-3.3 V (SOT23-5)
Frequencies” table in
-55 to 125
SiT2024 datasheet

115.2 to 137 -40 to 85,

±20, ±25, -40 to 105, 1.8 V, 2.9 x 2.8
SiT2025BM-S1-XXX-000.FP0000 SiT2025 LVCMOS Refer “Supported SiT6165DK
±30, ±50 -40 to 125, 2.5-3.3 V (SOT23-5)
Frequencies” table in
-55 to 125
SiT2025 datasheet

SiT8924BM-71-XXX-000.FP0000 2.0 x 1.6 SiT6161DK

AEC-Q100 SiT8924BM-11-XXX-000.FP0000 1 to 110 -40 to 85, 2.5 x 2.0 SiT6161DK

Automotive
±20, ±25, -40 to 105, 1.8 V,
Oscillator SiT8924BM-21-XXX-000.FP0000 SiT8924 LVCMOS Refer “Supported 3.2 x 2.5 SiT6165DK
±30, ±50 -40 to 125, 2.5-3.3 V
Frequencies” table in
-55 to 125 5.0 x 3.2 SiT6160DK
SiT8924BM-31-XXX-000.FP0000 SiT8924 datasheet

SiT8924BM-81-XXX-000.FP0000 7.0 x 5.0 SiT6160DK

SiT8925BM-71-XXX-000.FP0000 2.0 x 1.6 SiT6161DK

SiT8925BM-11-XXX-000.FP0000 115.2 to 137 -40 to 85, 2.5 x 2.0 SiT6161DK

±20, ±25, -40 to 105, 1.8 V,
SiT8925BM-21-XXX-000.FP0000 SiT8925 LVCMOS Refer “Supported 3.2 x 2.5 SiT6165DK
Frequencies” table in ±30, ±50 -40 to 125, 2.5-3.3 V
-55 to 125 5.0 x 3.2 SiT6160DK
SiT8925BM-31-XXX-000.FP0000 SiT8925 datasheet

SiT8925BM-81-XXX-000.FP0000 7.0 x 5.0 SiT6160DK

SiT2001 ±20, ±25, -40 to 85, 1.8 V 2.9 x 2.8

SiT2001BI-S1-XXX-000.FP0000 LVCMOS 1 to 110 SiT6165DK
±50 -20 to 70 2.5-3.3 V (SOT23-5)

SiT2002 ±20, ±25, -40 to 85, 1.8 V, 2.9 x 2.8

SiT2002BI-S1-XXX-000.FP0000 LVCMOS 115 to 137 SiT6165DK
±50 -20 to 70 2.5-3.3 V (SOT23-5)

1 to 110
-40 to 105,
SiT2018[8] Refer to Supported ±20, ±25, 1.8 V, 2.9 x 2.8
SoT23 SiT2020BM-S1-XXX-000.FP0000 LVCMOS -40 to 125, SiT6165DK
SiT2020 Frequencies tables in ±30, ±50 2.5-3.3 V (SOT23-5)
Oscillator -55 to 125
SiT2018 and SiT2020
datasheets

115.194001 to 137
-40 to 105,
SiT2019[9] Refer to Supported ±20, ±25, 1.8 V, 2.9 x 2.8
SiT2021BM-S1-XXX-000.FP0000 LVCMOS -40 to 125, SiT6165DK
SiT2021 Frequencies tables in ±30, ±50 2.5-3.3 V (SOT23-5)
SiT2019 and SiT2021 -55 to 125
datasheets

Notes:
4. Revision number which is placed right after SiTXXXX in the part number is fixed and not programmable. For instance, SiT8008A cannot be
programed to SiT8008B.
5. SiT8920 FP devices are used to program SiT1618 part numbers. Excluding family, SiT8920 and SiT1618 also share the same ordering codes.
6. SiT8920 FP devices are used to program SiT8918 part numbers. Excluding family, SiT8920 and SiT8918 also share the same ordering codes.
7. SiT8921 FP devices are used to program SiT8919 part numbers. Excluding family, SiT8921 and SiT8919 also share the same orderi ng codes.
8. SiT2020 FP devices are used to program SiT2018 part numbers. Excluding family, SiT2020 and SiT2018 also share the same ordering codes.
9. SiT2021 FP devices are used to program SiT2019 part numbers. Excluding family, SiT2021 and SiT2019 also share the same ordering codes.

Rev 1.79 Page 3 of 7 www.sitime.com

Field Programmable Oscillators

Table 2. Field Programmable Devices ‒ MEMS VCXO[10]

Frequency Frequency Temp Pull Package
Product Field Programmable (FP) Supported Signaling Range Stability Range Voltage Range Size Socket
Family Part Number Devices Type (MHz) (ppm) (°C) (V) (ppm) (mm x mm) Card

SiT3808AI-22-XXXX-000.FP0000 3.2 x 2.5 SiT6165DK

SiT3807 [11]
-40 to 85, 1.8 V, ±50 to
SiT3808AI-C2-XXXX-000.FP0000 LVCMOS 1 to 80 ±25, ±50 5.0 x 3.2 SiT6160DK
SiT3808 -20 to 70 2.5-3.3 V ±1600

High SiT3808AI-D2-XXXX-000.FP0000 7.0 x 5.0 SiT6160DK

Performance
Single-Ended
VCXO SiT3809AI-22-XXXX-000.FP0000 3.2 x 2.5 SiT6165DK

-40 to 85, 1.8 V, ±50 to

SiT3809AI-C2-XXXX-000.FP0000 SiT3809 LVCMOS 80 to 220 ±25, ±50 5.0 x 3.2 SiT6160DK
-20 to 70 2.5-3.3 V ±1600

SiT3809AI-D2-XXXX-000.FP0000 7.0 x 5.0 SiT6160DK

Table 3. Field Programmable Devices ‒ MEMS Spread Spectrum XO[10]

Frequency Frequency Temp Spread Package
Product Field Programmable (FP) Supported Signaling Range Stability Range Voltage Range Size Socket
Family Part Number Devices Type (MHz) (ppm) (°C) (V) (%) (mm x mm) Card

SiT9005AI-71-XXXX000.FP0000 2.0 x 1.6 SiT6161DK

Spread 1 to 141 ±0.125
Spectrum to ±2,
Refer to ±20, ±25, -40 to 85, 1.8 V,
Single- SiT9005AI-11-XXXX000.FP0000 SiT9005 LVCMOS 2.5 x 2.0 SiT6161DK
Table 5 for ±50 -20 to 70 2.5-3.3 V
Ended -0.25
Oscillator unsupported
frequencies to -4
SiT9005AI-21-XXXX000.FP0000 3.2 x 2.5 SiT6165DK

AEC-Q100 SiT9025AM-71-XXXX000.FP0000 1 to 150 2.0 x 1.6 SiT6161DK

Automotive -55 to 125, ±0.125
Spread Refer to to ±2,
±20, ±25, -40 to 125, 1.8 V,
Spectrum SiT9025AM-11-XXXX000.FP0000 SiT9025 LVCMOS SiT9025 2.5 x 2.0 SiT6161DK
±50 -40 to 105, 2.5-3.3 V
Single- datasheet for -0.25
Ended unsupported -40 to 85,
to -4
Oscillator SiT9025AM-21-XXXX000.FP0000 frequencies 3.2 x 2.5 SiT6165DK

SiT9003AI-33-33XX-000.FP000 2.5 V, 5.0 x 3.2 SiT6160DK

2.8 V,
±0.25
Spread 3.3 V
SiT9003AI-83-33XX-000.FP000 to ±0.5, 7.0 x 5.0 SiT6160DK
Spectrum -40 to 85,
Single- SiT9003 LVCMOS 1 to 110 ±50, ±100
Ended -20 to 70
SiT9003AI-33-18XX-000.FP000 -0.5 5.0 x 3.2 SiT6160DK
Oscillator
to -1
1.8 V
SiT9003AI-83-18XX-000.FP000 7.0 x 5.0 SiT6160DK

Table 4. Field Programmable Devices ‒ MEMS µPower XO[10]

Frequency Frequency Temp Package
Product Field Programmable (FP) Supported Signaling Range Stability Range Voltage Size
Family Part Number Devices Type (MHz) (ppm) (°C) (V) (mm x mm) Availability

-40 to 85,
µPower XO SiT1581AI-J3-XXE-000.FP0000 SiT1581 LVCMOS 32.768 ±0.5 1.8 V 1.5 x 0.8 Contact SiTime
-20 to 70

Notes:
10. Revision number which is placed right after SiTXXXX in the part number is fixed and not programmable. For instance, SiT8008A cannot be
programed to SiT8008B.
11. SiT3808 FP devices are used to program SiT3807 part numbers. Excluding family, SiT3808 and SiT3807 also share the same ordering codes.

Table 5. List of SiT9005 FP Oscillator Unsupported Frequencies

SiT9005 FP Oscillator Unsupported Frequency Range (MHz)
±2.06% center spread -4.01% down spread -4.28% center spread
Min. Max. Min. Max. Min. Max.
120.100000 121.100000 121.000000 121.300000 120.100000 122.300000
122.900000 123.100000
123.500000 124.000000
124.9000000 125.200000

Rev 1.79 Page 4 of 7 www.sitime.com

Field Programmable Oscillators

Tape & Reel Options For example, the last letter “G” in the SiT8008AI-71-XXX-
000.FP0000G indicates 250 pieces of SiT8008AI FP
FP devices are shipped with standard Tape & Reel options. devices shipped in 8 mm tape.
An additional letter is affixed to the end of the FP device
part numbers in Table 6 to Table 8 to specify the tape size The complete list of T&R options for different device
and the reel quantity. package sizes are shown in tables below.

Table 6. Ordering Codes for Supported Tape & Reel Packing Method
Supported FP Device: SiT8008, SiT8009, SiT8920, SiT8921, SiT8924, SiT8925, SiT9005, SiT9025
Tape & Reel 8 mm Tape 12 mm Tape 16 mm Tape
Package Size (mm x mm) 250 pcs reel 1ku reel 250 pcs reel 1ku reel 250 pcs reel 1ku reel
2.0 x 1.6 G E – – – –
2.5 x 2.0 G E – – – –
3.2 x 2.5 G E – – – –
5.0 x 3.2 – – X Y – –
7.0 x 5.0 – – – – X Y

Table 7. Ordering Codes for Supported Tape & Reel Packing Method
Supported FP Device: SiT3808, SiT3809, SiT3821, SiT3822, SiT8208, SiT8209, SiT9002, SiT9003, SiT9121, SiT9122
Tape & Reel 12 mm Tape 16 mm Tape
Package Size (mm x mm) 250 pcs reel 1ku reel 250 pcs reel 1ku reel
2.5 x 2.0 X Y – –
3.2 x 2.5 X Y – –
5.0 x 3.2 X Y – –
7.0 x 5.0 – – X Y

Table 8. Ordering Codes for Supported Tape & Reel Packing Method
Supported FP Device: SiT2024, SiT2025, SiT9201, SiT2001, SiT2002, SiT2020, SiT2021
Tape & Reel 8mm Tape
Package Size (mm x mm) 250 pcs reel 1ku reel
2.9 x 2.8 G E

Rev 1.79 Page 5 of 7 www.sitime.com

Field Programmable Oscillators

Time Machine II Programmer Kit Note that earlier versions of the programming kit were
shipped with the SiT6162DK socket card that
FP devices are programmed with SiTime’s oscillator accommodates 2.7 x 2.4 mm x mm (2.5 x 2.0 compatible)
programmer. Time Machine II is a complete programming and 3.2 x 2.5 mm x mm 4-pin packages. The SiT6162DK
kit. It comes with the programmer base unit and three has since been replaced with SiT6165DK, which supports
socket cards, each of which accommodates two different the 2.9 x 2.8 mm x mm (SOT23-5) packages in addition to
package sizes. The ordering codes for the programming kit 3.2 x 2.5 mm x mm packages.
and the socket cards are shown in the table below.
Table 9. Programmer Kit Description and Ordering Codes
Device Name Part Number Description

Programming Kit SiT6100DK The complete kit that includes the programmer base (SiT61650DK) and three socket cards
(SiT6160DK, SiT6161DK and SiT6165DK)

Programmer Base SiT6150DK The base programmer with no sockets

Programming Socket SiT6160DK 5.0 x 3.2 and 7.0 x 5.0 packages programming sockets to program all 6-pin and 4-pin field programmable devices

Programming Socket SiT6161DK 2.0 x 1.6 and 2.5 x 2.0 packages programming sockets to program 6-pin and 4-pin field programmable devices

Programming Socket SiT6165DK 3.2 x 2.5 package programming sockets to program 6-pin and 4-pin field programmable devices.
2.9 x 2.8 (SOT23-5) package supports 5-pin field programmable devices

Socket Card Selection for Programming Table 10 and shows how to select the proper socket card
for the desired FP device package size. Note that the
Each socket card for the Time Machine II programmer package sizes are also printed right next to the sockets on
comes with two sockets, each of which accommodates a the socket cards for visual identification during device
particular package size. In addition, some sockets are programming.
designed to work with 4-pin devices only whereas other
sockets can accommodate both 4-pin and 6-pin devices.

Table 10. Supported Packages

2.0 x 1.6 2.5 x 2.0 2.9 x 2.8 3.2 x 2.5 5.0 x 3.2 7.0 x 5.0
Package Size
(4-pin) (4-pin) (5-pin) (4-pin & 6-pin) (4-pin & 6-pin) (4-pin & 6-pin)
Socket to use SiT6161DK SiT6165DK SiT6160DK
Supported SiT8008 SiT8008 SiT2024 SiT8008 SiT8008 SiT8008
Field Programmable SiT8009 SiT8009 SiT2025 SiT8009 SiT8009 SiT8009
Devices
SiT8920 SiT8920 SiT9201 SiT8208 SiT8208 SiT8208
SiT8921 SiT8921 SiT2001 SiT8209 SiT8209 SiT8209
SiT8924 SiT8924 SiT2002 SiT8920 SiT8920 SiT8920
SiT8925 SiT8925 SiT2020 SiT8921 SiT8921 SiT8921
SiT9005 SiT9003 SiT2021 SiT8924 SiT8924 SiT8924
SiT9005 SiT8925 SiT8925 SiT8925
SiT9025 SiT3808 SiT3808 SiT3808
SiT3809 SiT3809 SiT3809
SiT9121 SiT9121 SiT9121
SiT9122 SiT9122 SiT9122
SiT9003 SiT9003 SiT9003
SiT9005
SiT9025

Rev 1.79 Page 6 of 7 www.sitime.com

Field Programmable Oscillators

Table 11. Revision History

Revision Release Date Change Summary
0.8 1-Apr-2013 First release
Added more field programmer devices
1.0 27-Feb-2014 Updated Time Machine Socket Card information
Formatted enhancement
1.01 12-Mar-2014 Corrected the ordering code for High Temperature, Single-Ended devices
Updated revision from A to B for SiT8008/8009/8920/8921
1.1 30-Mar-2015
Corrected frequency stability of SiT9002
Added supports for AEC-Q100 automotive products;SiT2024, SiT2025, SiT8924,SiT8925
Added supports for clock generators products;SiT9201, 2001, 2002, SiT2018, SiT2019, SiT2020, SiT2021
1.2 21-Jul-2015
Corrected frequency range and frequency stability of the high temperature products (SiT8920/SiT8921) in Table 1
Updated the part number of the program kits in Table 6
Added ±25 ppm frequency stability option to AEC-Q100 family
1.3 15-Sep-2015 Revised spread percentage of SiT9001
Added 2.8 V voltage option to SiT9003
1.4 14-Mar-2016 Corrected and added one more “0” at the end of all part numbers except for SiT900x”
Added SiT9005
Added SiT9002 unsupported frequencies list
Took out 2520 and 3225 package options from SiT9003
1.5 1-Feb-2018
Took out 2520 package option from SiT8208, SiT8209, SiT3807 and SiT3808
Took out SiT9001
Updated logo and company address, other page layout changes
Added SiT5155, SiT5156, SiT5157, SiT5356, SiT5357
Added SiT6166DK
1.6 26-Nov-2019 Corrected SiT8208, SiT8209, SiT3808 and SiT3809 part numbers
Corrected SiT3808, SiT3809, SiT3821, SiT3822 pull range options
Corrected SiT3808, SiT3809 p/ns
Added footnotes to supported devices
1.7 4-Mar-2020 Removed SiT3821, SiT3822, SiT9001, SiT9002
Removed SiT6166DK
1.75 9-Mar-2020 Added SiT1581, SiT5146, SiT5147, SiT5346, SiT5347, SiT5348, SiT5349, SiT9346, SiT9347
1.76 18-Sep-2020 Resolved typographical errors
1.77 12-May-2021 Added 1.8V to 3.3V support for SiT1602 and SiT8008, Added SiT9025 support
Added SiT1408, SiT1409, SiT1418, SiT1419, SiT1420, SiT1421, SiT1424, SiT1425 active resonators
1.78 1-Feb-2022 Removed ruggedized Super-TCXOs and differential oscillators
Fixed hyperlinks and other formatting issues
Removed SiT14xx active resonators and ruggedized TCXOs (SiT5146, SiT5147, SiT5346, SiT5347, SiT5348, SiT5349,
1.79 5-Dec-2024
SiT9346, SiT9347)

SiTime Corporation, 5451 Patrick Henry Drive, Santa Clara, CA 95054, USA | Phone: +1-408-328-4400 | Fax: +1-408-328-4439

© SiTime Corporation 2013-2024. The information contained herein is subject to change at any time without notice. SiTime assumes no responsibility or liabi lity for any loss, damage
or defect of a Product which is caused in whole or in part by (i) use of any circuitry other than circuitry embodied in a SiTime product, (ii) misuse or abuse including static discharge, neglect
or accident, (iii) unauthorized modification or repairs which have been soldered or altered during assembly and are not capable of being tested by SiTime under its normal test conditions, or
(iv) improper installation, storage, handling, warehousing or transportation, or (v) being subjected to unusual physical, thermal, or electrical stress.

Disclaimer: SiTime makes no warranty of any kind, express or implied, with regard to this material, and specifically disclaims any and all express or implied warranties, either in fact or by
operation of law, statutory or otherwise, including the implied warranties of merchantability and fitness for use or a particular purpose, and any implied warranty arising from course of dealing or
usage of trade, as well as any common-law duties relating to accuracy or lack of negligence, with respect to this material, any SiTime product and any product documentation. Products sold by
SiTime are not suitable or intended to be used in a life support application or component, to operate nuclear facilities, or in other mission critical applications where human life may be involved
or at stake. All sales are made conditioned upon compliance with the critical uses policy set forth below.

CRITICAL USE EXCLUSION POLICY

BUYER AGREES NOT TO USE SITIME'S PRODUCTS FOR ANY APPLICATION OR IN ANY COMPONENTS USED IN LIFE SUPPORT DEVICES OR TO OPERATE NUCLEAR
FACILITIES OR FOR USE IN OTHER MISSION-CRITICAL APPLICATIONS OR COMPONENTS WHERE HUMAN LIFE OR PROPERTY MAY BE AT STAKE.

SiTime owns all rights, title and interest to the intellectual property related to SiTime's products, including any software, firmware, copyright, patent, or trademark. The sale of SiTime products does
not convey or imply any license under patent or other rights. SiTime retains the copyright and trademark rights in all documents, catalogs and plans supplied pursuant to or ancillary to the sale
of products or services by SiTime. Unless otherwise agreed to in writing by SiTime, any reproduction, modification, translation, compilation, or representation of this material shall be strictly
prohibited.

Rev 1.79 Page 7 of 7 www.sitime.com