Scribd
Upload
30 views

2 MARKS

TLRF 2 MARKS

Uploaded by

jeevs33
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
30 views

2 MARKS

TLRF 2 MARKS

Uploaded by

jeevs33
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

1.How frequency distortion occurs in a line?

2.Find the reflection co-efficient and standing wave ratio on a line having Z 0=50Ω and terminated in
ZR=60+j40Ω.
3.Define distortion less line. State the condition for a distortion less line.
4.A transmission line has Z0 = 745∠−12° and is terminated by ZR = 100 ohms. Calculate the
reflection loss in dB.
5.Justify that a finite line terminated in its characteristic impedance behaves as an infinite line.
6.Find the input impedance of a transmission line of length λ/8, terminated with the load of 40+j20 Ω.
Assume Z0=50Ω.
7.A lossless transmission line has a shunt capacitance of 100pF/m and a series inductance of 4mH/m.
determine the characteristic impedance.
8.What are standing waves? When the standing waves does exist?
9.State the assumptions for the analysis of the performance of the radio frequency line.
10.State the relation between standing wave ratio and reflection coefficient.
11.A lossless line has a characteristic impedance of 400 Ω. Determine the standing wave ratio if the
receiving end impedance is 800+j0.0 Ω.
12.How will you make standing wave measurements on coaxial cable?
13.What is stub? Why it is used in between transmission lines?
14.Design a quarter wave transformer to match a load of 200 ohm to a source resistance 500 ohm.
The operating frequency is 200MHz.
15.What do you mean by copper insulators?
16.Predict the length and impedance of a quarter wave transformer that matches a 150Ω load to a 75Ω
line at a frequency of 12GHz.
17.Mention the significance of short- circuited stub.
18.What is the significance of quarter wave line? Recall the equation for the input impedance?
19.Write down the expression to determine the length of the stub.
20.Distinguish between single and double stub matching.
21. Find the Characteristic impedance of a line at 1600HZ if Z oc=750∠−30 ° Ω and Zsc=600∠−20 °
Ω.
22. A λ/8 transmission line is terminated by 25 + j50Ω. If the characteristic impedance of the line is
100 Ω. Find input impedance of the line.
23. What do the nodes and anti-nodes on a standing wave represent?
24. A 50Ω line operating at 1 GHz is terminated by a load of 20Ω. Find the values of maximum and
minimum impedance and their location on the line.
25. Draw the equivalent circuit of a unit length of a transmission line?
26. A transmission line has a characteristic impedance of 600 ohm. Determine the magnitude of
reflection coefficient if the receiving end impedance is (650-j475) ohm.
27. What are the primary and secondary constants of a transmission line?
28. Write the need for inductance loading of telephone cables?
29. When does a finite line appear as an infinite line?
30. Write any four applications for quarter wave line transformer.

You might also like