CHEAT SHEET
12-speed 105 / Ultegra / Dura-Ace
Rear Derailleur
Status LED
Charge port
Function button
Fn. button
System Battery Check
Press the function button on the 100% - 51% Solid green (3 seconds)
rear derailleur for 0.5s or less.
50% - 26% Flashing green (8 times)
The LED will then indicate the
battery charge level. bettershifting.com/battery 25% - 1% Solid red (3 seconds)
Shifter Battery Check
Press both buttons on 100% - 11% Yellow/green
a single shifter for
0.5s. The shifter LED 10% - 1% Red
will indicate the
battery level. 0% Off
bettershifting.com/battery
Synchronized Shift
To change to the next shift mode, Manual Shift Solid blue
press the function button twice.
Shift Mode 1 is usually set to Semi Shift Mode 1 Flashing (2 times)
Synchronized shift, while the default for
bettershifting.com/shiftmode
Shift Mode 2 is Full Synchronized shift. Shift Mode 2 Flashing (3 times)
Adjustment mode
The Y-button moves the
Press the function Y derailleur away from the frame.
button for 2-5 seconds
to enter derailleur
adjustment mode.
X The X-button moves the
derailleur towards the frame. bettershifting.com/adjustment
Visit the adjustment page for info on When done, press the function button
how to adjust the front derailleur. for 0.5s to exit adjustment mode.
Bluetooth Connection Mode
Press the function button for 0.5-2 seconds to
trigger Bluetooth Connection Mode.
The LED will flash while the bike is in Bluetooth
Connection Mode (30 seconds). bettershifting.com/bluetooth
V2022.11.4
