WACKER® E 1656
SILICONE FLUID EMULS ION
Product description gloss and depth of image.
WACKER® E 1656 is an oil-in-water emulsion of an Stir well before use.
aminofunctional polydimethylsiloxane. WACKER® E
1656 is stabilized by nonionic emulsifiers. Therefore,
combination of WACKER® E 1656 with other Storage
emulsions is facilitated in many cases.
The 'Best use before end' date of each batch is shown
on the product label.
Application
Storage beyond the date specified on the label does
WACKER® E 1656 can be used best in car polishes, not necessarily mean that the product is no longer
e.g., in paint conditioners, paint polishes and vinyl usable. In this case however, the properties required
conditioners. In paint conditioners and paint polishes for the intended use must be checked for quality
both gloss level and detergent resistance are assurance reasons.
improved.
WACKER® E 1656 is especially useful for the making
of vinyl conditioners. Due to the polar aminofunctions Safety notes
of the emulsion's active, the protective polish film
adheres extremely well to the substrate surface which Comprehensive instructions are given in the
results in that gloss and depth of image are retained corresponding Material Safety Data Sheets. They are
for a longer period of time. In combination with available on request from WACKER subsidiaries or
emulsions based on polydimethylsiloxanes, e.g. may be printed via WACKER web site
WACKER® E 1044, the characteristics of vinyl http://www.wacker.com.
conditioners can be exactly adjusted with regard to
Product data
Typical general characteristics Inspection Method Value
Appearance milky
Emulsifier nonionic
Solid content approx. 63 %
pH-Value approx. 8
Amine number approx. 0,1 mmol/g
Particle size approx. 210 nm
These figures are only intended as a guide and should not be used in preparing specifications.
The data presented in this medium are in accordance with the present state of our knowledge but The management system For technical, quality, or
do not absolve the user from carefully checking all supplies immediately on receipt. We reserve the has been certified product safety questions,
right to alter product constants within the scope of technical progress or new developments. The according to please contact:
recommendations made in this medium should be checked by preliminary trials because of DIN EN ISO 9001 and
conditions during processing over which we have no control, especially where other companies’ DIN EN ISO 14001 Wacker Chemie AG
raw materials are also being used. The information provided by us does not absolve the user from Hanns-Seidel-Platz 4
the obligation of investigating the possibility of infringement of third parties’ rights and, if necessary, WACKER® is a trademark 81737 München, Germany
clarifying the position. Recommendations for use do not constitute a warranty, either express or of [email protected]
implied, of the fitness or suitability of the product for a particular purpose. Wacker Chemie AG.
www.wacker.com
Technical data sheet for WACKER® E 1656 / Version: 1.3 / Date of last alteration: 06.11.2014 1/1
