Machine Translated by Google
PA2S
Quick Installation Guide
PA2S
1) Port Definition
ÿÿ ÿÿÿ ÿ ÿÿ
ÿÿÿ ÿ ÿ ÿÿ
Machine Translated by Google
PA2S
Quick Installation Guide
1 Speaker port: according to the device input voltage adaptive output maximum power.
4ÿ spkaker, POE/10W, 12V/10W, 18V/20W, 24V/30W.
The greater the horn impedance, the smaller the output power.
Suggested wire diameter: 18AWG or larger diameter.
2 Line out port: audio signal output, for external headset or active speakers.
3 LED port: 5V / 5mA output, can be an external LED, indicating the network status, call status, registration status.
4 Function button port: connect the function button, you can make an emergency call through this button.
5 Microphone port & line in port: the multiplex port is microphone input by default, which can be configured as audio line input function
through software.
a) Sensitivity: -38dB, bias voltage 2.2V. b)
Microphone signal cable it is recommended to use a shielded cable and connect the shield cable to the grounding screw, improve
anti-interference.
6 Switch input port: the connection switch, you need to log on to the relevant settings page.
7 Switch output port: corresponding to the short-circuit input port, login device security page settings, you can control the alarm
light, electric locks and other device, with the ÿ power port connection for external device power supply.
8 Power input port: 12V ~ 24V 2A input, according to the input voltage to determine the maximum output power amplifier.
9 Camera port: standard RJ45 port, connect the original camera, the proposed use of five or five sub-network cables.
10 Ethernet port: WAN port, standard RJ45 port, 10/100M adaptive, support PoE input. It is recommended to use five or super five
network cables.
eleven
Network / Registration LED: indicates network status, call status, registration status.
Fast flashing: network anomaly or SIP account exception.
Slow flashing: during a call.
Always bright: successful registration.
12 Volume control keys: standby to adjust the volume of the ringtone, call only adjust the call volume.
a) Volume decrease key: adjust ring volume / call volume / broadcast volume. Long press the volume down key to broadcast the
IP address by voice.
b) Volume increase key: adjust ring volume / call volume / broadcast volume.
13 Reset key: press and hold for 6S, and the indicator light will turn off, and the device will restart and restore the factory settings.
14 Recording output port: mixed output of local microphone voice and call voice.
fifteen Grounding screw: the metal shell of external accessories or access control panel shall be connected to this port to prevent abnormal
operation of equipment caused by static electricity and other port. (except microphone accessories)
Machine Translated by Google
PA3
Quick Installation Guide
1. Installation
The first step: the device with metal strips (user-owned) fixed in the installation location.
The second step: connect the function key, speaker, microphone and other peripheral devices to the
ÿ
corresponding port. (metal shell with thick wires connected to the device grounding screw.)
The third step: plug the network cable and power, the device light flashes on behalf of the power
connection is normal.
2.Searching device
Method 1:
Download address: http://download.fanvil.com/tool/iDoorPhoneNetworkScanner.exe
Open the iDoorPhone Network Scanner. Press the Refresh button to search the device and find the
IP address.
Method 2:
Connect the speaker, by pressing the volume down key for 3 seconds
(after 30 seconds after power on), the device automatically voice broadcast the machine's IP address.
Method 3:
Long press the volume up key for 3 seconds, the speaker issued a rapid beep, and then quickly press the
Volume up key three times, beep stopped. Wait 10 seconds, successfully switch to dynamic IP after the
system automatically voice broadcast IP address. Switching again will become a fixed IP address.
Default Setting
DHCP Default
Enabled by default Static IP address 192.168.1.128
client
Voice broadcast IP Hold the volume down
Default Web port 80
address key for 3 seconds
Machine Translated by Google
PA2S
Quick Installation Guide
3. Fast settings
Step 1: Log in to the device page
Use the web browser input IP (for example: http://192.168.1.128) access.
The default user and password are admin.
Step 2: Set SIP account
Set SIP server address, port, user name, password and SIP user with assigned SIP account parameters.
Select “Activate”, and then click [Apply] to save this setting.
Machine Translated by Google
PA2S
Quick Installation Guide
Step 3: Set the volume (if not connected can skip)
Intercom settings => Media Settings => Media Settings
Set the device volume size, as shown below, click [Apply].
Hands-free speakerphone volume setting: normal call speaker volume size.
Hands-free Mic Gain: microphone volume size.
Step 4: Set function key (if not connected can skip)
Set the function key as shown below for a quick start, click [Apply] to save these settings.
Type: Memory key
Number 1 (Value): the function key will dial to this number 1
Number 2 (Value 2): if number 1 is unavailable, it will be forwarded to number 2.
Subtype: speed dial
Line: working line
Machine Translated by Google
PA2S
Quick Installation Guide
Step 5: Set speaker (Default Panel speaker mode)
Intercom settings => Media Settings => Speaker Settings
Default Panel speaker mode, It is the intercom panel terminal with shell, in order to ensure the
speech effect and avoid damaging the speaker, the output power is limited to 10W.
If you need a high-power speaker for broadcasting, you can adjust it to the external speaker mode:
The 10W / 20W / 30W can be selected according to the power of the external horn.
But it is necessary to match the corresponding power adapter.
power adapter Output Power Speaker spec
PoE 10W 10W/4ÿ
12V/2A DC 10W 10W/4ÿ
18V/2A DC 20W 20W/4ÿ
24V/2A DC 30W 30W/4ÿ
Information on this document is subject to change without notice. Fanvil makes no warranties with
Respect to this document, due to misuse this document is caused by indirect or incidental damages,
Fanvil does not assume any responsibility.
For more product information, please visit www.fanvil.com
