Laws of Motion - Practice Sheet-03 - Arjuna JEE AIR D1 2026
Laws of Motion - Practice Sheet-03 - Arjuna JEE AIR D1 2026
1. Resolve all the forces along parallel to the 5. A displacement vector, at an angle of 30º with
plane and ⊥ to the plane in following cases. y-axis has an x-component of 10 units. Then
the magnitude of the vector is -
m (A) 5.0 (B) 10
(I)
smooth m (C) 11.5 (D) 20
smooth 6. Find the component of forces along X & Y
m axis if following cases.
(II) y
smooth
10 N
(I)
m 30° x
1
m
2
(III) y
2 1 12 N
(II)
37°
m
(IV) M x
y
60º 2m
5N 3m
(A) 2. 5 N (B) 5 N (A) 6 mg (B) zero
(C) 5 3 N (D) 10 N. (C) 2 mg (D) 3 mg
2
8. Three blocks are connected as shown in fig. 13. A system of masses M1, M2 and M3 is shown
on a horizontal frictionless table if m 1 = 1 kg, in the diagram. Then match the following
m2 = 8 kg, m3 = 27 kg and T3 = 36 N, T2 will columns
be :- F M 1 M 2 M3
T1 T2 T3 Column I
M1 M2 M3
Column II
(A) 18 N (B) 9 N (a) acceleration of system
(C) 3.375 N (D) 1.75 N F(M2 + M3 )
(p)
M1 + M2 + M3
9. A block of mass M is pulled along a
(b) Reaction force of M2
horizontal frictionless surface by a rope of
F
mass m. If a force P is applied at the free end (q)
M1 + M2 + M3
of the rope, the force exerted by the rope on
the block is - on M1 is
Pm Pm (c) Reaction force of M2
(A) (B) F(M3 )
M+m M−m (r)
PM M1 + M2 + M3
(C) P (D)
M+m on M3 is
(A) a → p, b → r, c→q
10. Three blocks of masses m1, m2 and m3 are
(B) a → q, b → p, c→r
placed on a horizontal frictionless surface. A
(C) a → q, b → r, c→p
force of 40 N pulls the system then calculate
the value of T, if m1 = 10kg, m2 = 6 kg, m3 = (D) a → r, b → p, c→q
4 kg –
m1 14. The surfaces are frictionless, the ratio of T1
m2 m3 and T2 is :-
40N T
10 kg 6 kg 4 kg F
T2 T1
30º
(A) 40 N (B) 20 N 3kg. 12kg. 5kg.
(C) 10 N (D) 5 N
(A) 3 :1 (B) 1 : 3
11. In tug of war two groups of men pull in
(C) 1 : 5 (D) 5 : 1
opposite direction on either end of rope. Each
group applies 2000 N of force. The tension in
15. Two blocks of masses 6 kg and 4 kg are
the rope is -
connected by a rope of mass 2 kg are resting
(A) 0 N (B) 1000 N
on a frictionless floor as shown in the
(C) 2000 N (D) 4000 N
following figure :
12. Blocks are in contact on a frictionless table. C B A F=60N
4kg 6kg
A horizontal force F = 3N is applied to one 2kg
block as shown. The force exerted by the
smaller block m2 on block m1 is- If a constant force of 60 N is applied to 6 kg
block then the tension in the rope at points
A,B (mid-point) and C are respectively given
by :
(A) 60 N, 60 N, 60 N (B) 30 N, 25 N, 20 N
(A) 1 N (B) 2 N
(C) 20 N, 25 N, 30 N (D) 20 N, 20 N, 20 N
(C) 3 N (D) 6 N
3
16. The ratio of weight of a man is stationary lift 18. The elevator shown in figure is descending,
and in a lift accelerating downwards with a with an acceleration of 2 ms–2. the mass of the
uniform acceleration is 3:2. The acceleration block A is 0.5 kg. The force exerted by the
of the lift is :- block A on the block B is :
g g
(A) (B)
3 2
4
2m/s
(C) g (D) g A
3
2
B
17. The force exerted by the person on the floor
(A) 2N
of the elevator is more than the weight of the
(B) 4N
person if the elevator is –
(C) 6N
(a) Going up and slowing down
(D) 8N
(b) Going up and speeding up
(c) Going down and slowing down
(d) Going down and speeding up
(A) a, c (B) b, c
(C) a, d (D) b, d
4
Answer Key
1. Resolve Type Ans. 10. B
2. D 11. C
3. C 12. A
4. B 13. B
5. D 14. D
6. Resolve Type Ans. 15. B
7. B 16. A
8. B 17. B
9. D 18. B
PW Web/App - https://smart.link/7wwosivoicgd4
Library- https://smart.link/sdfez8ejd80if