LABDHI INDUSTRIES
An ISO 9001:2015 CERTIFIED CO
Mfrs & Dealers In: SS304, 316, 310, 321 , 410, Monel, Hastalloy ,Inconel ,Alloy
High Tensile, Brass, Aluminium : Bolts, Nuts, Screws, Studs, Eye Bolts
Stud : B7+ 2H ,Gr B8 ,Gr B8M, G.I Studs, Anchor Fasteners, Hitech Clamp, U Bolt ,MS fasteners
Works Add:81,Narayan Dhru Street,1st Floor,Masjid west,Mumbai -400003
Correspondence Address: C-16 Samarpan Society New Maneklal Estate,Ghatkopar (W) Mumbai -400086
Email:
[email protected] OFF :022-61852525 Mob:9869059910
WORKS TEST CERTIFICATE EN-10204 3.1
CUSTOMER :M/s Spacetech Equipments & Structurals Pvt Ltd PO NO:verbal Date:22-11-2024
TEST REPORT: 18130 Inv NO: Date:
SPECIFICATION: NUT SA194 Gr 2H As Per ASTM Section II Part A ED-2021 Challan No:12755 Date:22-11-2024
CHEMICAL ANALYSIS
SIZE &
DESCRIPTION
Qty LOT NO. C% S% P% Si% Mn% Heat No
Nut 0.4 min 0.05 Max 0.04 Max 0.4 max 1.00 max
M20 48 N/20 0.56 0.015 0.025 0.2 0.72
M24 28 N/33 0.55 0.012 0.011 0.12 0.75
MECHANICAL ANALYSIS
SIZE & Proof Load for 24 Hrs test for nut 24 Hrs tempering test for
Qty Hardness HRC Proof Load Nut KN
DESCRIPTION Nut Temp C nut Hardness
Required 24-35 Remark 89 min HRB
M20 48 28.1,29.2,30.2 253.6 Satisfactory 540˚C 92
M24 28 29,30,30 365.4 Satisfactory 540˚C 95
HEAT TREATMENT
DESCRIPTION Hardening Tempering Min Tempering Temp
NUT ASTM SA194 Gr 2H 850˚C 620˚C 455˚C
THREADS AND DIMENSIONS
Nut ASME B1.13M-6h For Labdhi Industries
DIMENSIONAL & VISUAL CHECKS FOUND SATISFACTORY
IDENTIFICATION Nut 2H
WE CERTIFY THAT FASTNERS WAS MANUFACTURED,SAMPLED,TESTED AND INSPECTED IN ACCORDANCE
WITH THE SPECIFICATION AND THE RESULTS HAVE BEEN DETERMINED TO MEET THE REQUIRMENTS OF THE
SPECIFICATION QC DEPT
