100% found this document useful (1 vote)
55 views7 pages

Fender

Uploaded by

snukdolf
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
100% found this document useful (1 vote)
55 views7 pages

Fender

Uploaded by

snukdolf
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 7

7/31/2016 2015 Edge

501­02 Front End Body Panels 2015 Edge


Removal and Installation Procedure revision date: 01/30/2015

Fender

Removal

NOTE: Removal steps in this procedure may contain installation details.

NOTE: LH side shown, RH side similar.

1. Remove the fender splash shield.


Refer to: Fender Splash Shield (501­02 Front End Body Panels, Removal and Installation).

2. Remove the retainers and the door frame moulding.

3. Remove the bolt.


Torque: 106 lb.in (12 Nm)

http://www.fordtechservice.dealerconnection.com/vdirs/protech/global/default.asp?comefrom=Motocraft 1/7
7/31/2016 2015 Edge

4. Remove the bolts and separate the front bumper cover from the fender bracket.
Torque: 22 lb.in (2.5 Nm)

5. Remove the headlamp assembly.


Refer to: Headlamp Assembly (417­01 Exterior Lighting, Removal and Installation).

6. Remove the fender bolts.


Torque: 55 lb.in (6.2 Nm)

http://www.fordtechservice.dealerconnection.com/vdirs/protech/global/default.asp?comefrom=Motocraft 2/7
7/31/2016 2015 Edge

1. Remove the bolts.


Torque: 80 lb.in (9 Nm)
2. Remove the retainers and the cowl filler panel.

8. Remove the bolts.


Torque: 106 lb.in (12 Nm)

http://www.fordtechservice.dealerconnection.com/vdirs/protech/global/default.asp?comefrom=Motocraft 3/7
7/31/2016 2015 Edge

9. Remove the bolt.


Torque: 106 lb.in (12 Nm)

10. Carefully cut the foam sealant.

http://www.fordtechservice.dealerconnection.com/vdirs/protech/global/default.asp?comefrom=Motocraft 4/7
7/31/2016 2015 Edge

11. Remove the sound insulation.

12. Remove the bolts and the fender.


Torque: 106 lb.in (12 Nm)

http://www.fordtechservice.dealerconnection.com/vdirs/protech/global/default.asp?comefrom=Motocraft 5/7
7/31/2016 2015 Edge

Installation

1. To install, reverse the removal procedure.

2. After installation, check the alignment and correct if necessary.


Refer to: Body and Frame (501­26 Body Repairs ­ Vehicle Specific Information and Tolerance Checks, Description
and Operation).

Copyright © 2016 Ford Motor Company

http://www.fordtechservice.dealerconnection.com/vdirs/protech/global/default.asp?comefrom=Motocraft 6/7
7/31/2016 2015 Edge

http://www.fordtechservice.dealerconnection.com/vdirs/protech/global/default.asp?comefrom=Motocraft 7/7

You might also like