Sheet No.
: 4 0 0 8 - K
Issued Date : Jan. 2015
CMP AC
(CMP AC)
PRODUCT DESCRIPTION
CMP AC is a special synthetic resin paint giving a high-build quick drying, effective protection against
corrosion.
It possesses good sea water resistance and shows good adhesion to subsequent coats.
PRODUCT INFORMATION
Type Special synthetic resin anti-corrosive paint
Recommended Use Steel ship's hull and other steel structures
Type of binder Chlorinated rubber
Color SR (Pink silver), S (Silver)
Flash Point 27.0 ℃
Solids by Volume 47 ± 2 % (Test Method : ISO-3233)
VOC 486 g/ℓ (Method24)
Coverage(Theoretical) 6.27 ㎡/ℓ [0.159 ℓ/㎡] at D.F.T 75㎛
Wet Film Thickness 85 – 160 ㎛
Dry Film Thickness 40 – 75 ㎛
Drying Time Temperature 5℃ 10℃ 20℃ 30℃
(at D.F.T. 75㎛) Surface Dry 1 hr. 45 min. 30 min. 20 min.
Hard Dry 6 hrs. 4.5 hrs. 3 hrs. 2.5 hrs.
Painting Interval Minimum 12 hrs. 8 hrs. 6 hrs. 5 hrs.
(at D.F.T. 75㎛) Maximum - - - -
Thinner RAVAX THINNER, CR/ACRI THINNER A
Method of Application Airless spray, Brush, Roller
Temperature : Minimum -5℃
Humidity : Maximum 85 % R.H.
For Airless spray ;
Condition of Application Tip No. : GRACO 721, 723
Paint output pressure : 14.7 – 17.7 MPa
Viscosity : 140 sec.(Ford Cup No.4)
Thinning : 0 - 5 % by volume
Preferable Preceding Coats EPICON ZINC RICH PRIMER B-2, CERABOND 2000, etc.
Preferable Subsequent Coats ACRI 700 FINISH ST, SEA GRANDPRIX Series, etc.
Packaging One pack product
The information given in this sheet is effective at the date shown above and subject to revision from time to time without notice.
Sheet No. : 4 0 0 8 - K
Issued Date : Jan. 2015
TECHNICAL DATA (at 75㎛)
Temp (℃)
-5 0 5 10 15 20 25 30 35 40
Item
Set to touch 2.5H 1.5H 1H 45m 45m 30m 30m 20m 20m 20m
Min.(AF) 24H 18H 12H 8H 7H 6H 5.5H 5H 4.5H 4H
Dry to recoat Min.(AC) 16H 10H 6H 4.5H 4H 3H 3H 2.5H 2H 2H
Max. - - - - - - - - - -
Dry to hard 16H 10H 6H 4.5H 4H 3H 3H 2.5H 2H 2H
Body - - - - - - - - - -
Dry to immerse
Touch-up - - - - - - - - - -
Dry to Touch-up 16H 10H 6H 4.5H 4H 3H 3H 2.5H 2H 2H
Pot life - - - - - - - - - -
Shelf life (M) 12M 12M 12M 12M 12M 12M 12M 12M 12M 12M
Max. heat resistance 60℃
Abbreviation ; Y : Year, M : Month, D : Day, H : Hour, m : Minute
RECOMMENDABLE SURFACE PREPARATION
All surfaces to be free from various contaminants (oil, grease, dust, spray dust and etc.) and keep surfaces dry.
Kindly consult CSP sales office for specific information.
SAFETY PRECAUTIONS
In order to ensure safe use of our product, please be sure to follow the safety precautions indicated on the SDS and the paint container. If
you need further explanation, do not hesitate to consult our personnel or our local distributors before buying, opening, using, or disposing
the product. Since product contains flammable materials, keep away from sparks and open flame. No smoking should be permitted in the
area on painting.
Wear an appropriate protector (eye and face protection, protective clothing, barrier creams, etc) when mixing, applying, or drying the
paint. If products come into contact with the skin, wash thoroughly with warm water and soap or suitable cleaner. If the eyes is
contaminated, irrigate with water and seek medical advice immediately.
DISCLAIMER
The information, including data, specifications, directions and recommendations, contained in this Data Sheet describes the experiment results under
controlled or specially defined conditions and we do not guarantee that the Products, when used under the actual conditions of any intended use, will
produce the same results. The performance of the Products in their actual use is affected by various factors, and the User must judge whether the Products
are suitable for specific uses. We do not guarantee the performance of the Products under any specific operation environment other than the performance of
the Products under the conditions described in this Data Sheet.
The content of this Data Sheet, which is intended for facilitation of the User’s understanding and convenience of use of the Products, is subject to change at
any time without prior notice. We use our best efforts to reflect the latest and most accurate information in this Data Sheet, but we will not bear any liability
whatsoever relating thereto. The User must confirm that the Data Sheet is the latest version prior to using the Products.
We do not guarantee the performance or safety of the Products when used for a purpose or use other than what is described herein. Nor will we be liable for
any explanation or guarantee provided by any distributor or sales agent with respect to the Products, other than what is described in this Data Sheet.
Furthermore, each of the Products described herein is composed of various chemical substances, some of which may contain toxic and/or harmful
ingredients and may cause harmful results as a result of misuse or overuse of the Products. For specific causes of risk, conditions of use, harmfulness, etc.
of each of the Products, please carefully read, prior to use of the Products, the MSDS (Material Safety Data Sheet) inserted in each of the Products. We will
not be liable for any accident that may be caused in violation thereof.
The information given in this sheet is effective at the date shown above and subject to revision from time to time without notice.
