Industrial Training Report

Industrial Training Report

Name: Sajjad Ali

Roll No: SC04-BTEL-F20-164

Session fall: 2020-2024

Technology: BSc Electrical Engineering & Technology

Training Period: One Year

Training Organization: Harbin Electric International

1
 Abstract
I would like to express my gratitude to all the people behind the screen who helped me to
transform an idea into a real application. I would like to express my heart-felt gratitude to
my parents without whom I would not have been privileged to achieve and fulfill my
dreams. I am grateful to our principal. I would like to thank my internal guide Mr. Fahad
Nazeer Shaikh Coordinator for his technical guidance, constant encouragement and
support in carrying out my project. Secondly, I am no less grateful to the other employees
and members of the department for their kind co-operation and spontaneous response.
Last but not the least. I would like to thank my seniors who extend their advice's and
suggestion which helped me alto in compiling my seminar report.

2
Table of Contents
Chapter1: Introduction of Organization......................................................................4
 VISION:....................................................................................................................4
 MISSION..................................................................................................................5
 Development Chart...................................................................................................6
 Engineering Department:..........................................................................................6
 Electrical Department:..............................................................................................7
 Industrial Department:..............................................................................................7
 Training Department.................................................................................................7
 Area of Training.......................................................................................................7
Chapter2: Schedule of training &Duties as Supervisor.............................................8
 Description:..............................................................................................................8
 Chronological Order.................................................................................................8
Chapter3: Work on Machine shop &Workshop........................................................10
 Equipment Safety in Electrical Shop......................................................................10
 Basic Equipment Used in Electrical Shop..............................................................10
 Vacuum Circuit Breaker.........................................................................................11
 Working Principle of Vacuum Circuit Breaker......................................................11
 Main Parts of Vacuum Circuit Breaker..................................................................11
 DC Motor................................................................................................................12
 DC Motor Parts Name............................................................................................12
 Transformer............................................................................................................12
 AC motor................................................................................................................13
 AC motor Parts Name.............................................................................................13
 Variable Frequency Drive......................................................................................13
Chapter4........................................................................................................................14
 Conclusion..............................................................................................................14
 References:.............................................................................................................14
 Appendix:...............................................................................................................14

3
 Chapter1: Introduction of Organization

Harbin Electric
International

Nishat Group is a Pakistani multinational conglomerate company which is based in Lahore,

Pakistan. The company was founded by Pakistani business magnate Mian Muhammad Yahya in 1951.
Mian Muhammad Mansha is the current chairman of the group

VISION:
To provide quality products to its valued customers and explore new markets to promote /
expand sales of the company through innovative technology and effective resource management so as to
achieve optimum prices of products for sustainable and equitable growth and prosperity of the company.
MISSION:

Harbin Electric International prides itself on being an innovative and forward-thinking company.
The aim of the Company is to strive for excellence in the power sectors of Pakistan and remain at the
forefront of the industry while generating value for its stakeholders through commitment and integrity.

4
OrganizationChart

5
 Electrical Department:

Electrical engineering is an engineering discipline concerned with the study, design, and
application of equipment, devices, and systems which use electricity, electronics, and electromagnetism.
Electrical engineering is now divided into a wide range of different fields, including computer
engineering, systems engineering, power engineering, telecommunications, radio-frequency engineering,
signal processing, instrumentation, photovoltaic cells, electronics, and optics and photonics. Many of
these disciplines overlap with other engineering, spanning a huge number of specializations including
hardware engineering, power electronics, electromagnetics and waves, microwave engineering,
nanotechnology, electrochemistry, renewable energies, mechatronics/control, and electrical materials
science.
Industrial Department:
Industrial Engineering track gives an opportunity to its graduates to become engaged in
virtually any industry, be it manufacturing or service oriented. Productivity enhancement, process
optimization, quality improvement, logistic, ergonomic product design, environmental health and
safety are some of the major focal area of Industrial Engineering.

Training Department
Electrical Engineering
Department Industrial Engineering
Department

Area of Training
Workshop of Electrical Engineering Department

Engineering Material Lab

Machining Processing Lab
Machining Shop

6
7
Chapter2: Schedule of training &Duties as Supervisor.

Description: During training period working time from 08:00 AM to 05:00PM and my
training period was one year.

Chronological Order

Duration
SR# Weeks Types of Duties
(Hour/Day)
1 1st In this week learn all safety equipment use in workshop. 09
2 2nd In this week introduction with workshop worker. 09
3 3rd In this week learn about Vacuum circuit breaker. 09
4 4th In this week learn about vacuum circuit breaker operation. 09
5 5th In this week learn about all device use on VCB. 09
6 6th In this week learn about dc motor. 09
7 7th In this week learn about dc motor operation. 09
8 8th In this week learn about all device use on dc motor. 09
9 9th Learn about transformer. 09
10 10th Learn about transformer operation. 09
11 11th Learn about devices that use on transformer. 09
12 12th In this week learn about ac motor. 09
13 13th In this week learn about AC motor operation. 09
14 14th In this week learn about device use on AC motor. 09
15 15th In this week learn about generator. 09
16 16th In this week learn about generator operation. 09
17 17th In this week learn about device use on generator. 09
18 18th In this week learn about variable frequency drive. 09
19 19th In this week learn about variable frequency drive operation. 09
20 20th In this week learn about device use on variable frequency drive. 09
21 21th In this week learn about power hacksaw machine and its work. 09
22 22th In this week learn about disc cutter machine. 09
23 23th In this week learn about EDM machine. 09
24 24th In this week learn about EDM machine operation. 09

8
25 25th In this week learn about tools use on EDM machine. 09
26 26th In this week learn about NCRIB Cutting machine. 09
27 27th In this week learn about NCRIB Cutting machine operation. 09
28 28th In this week learn about tools use on NCRIB Cutting machine. 09
29 29th In this week perform VCB operation with help of Engineer 09
30 30th In this week perform dc motor operation with help of Engineer 09
31 31th In this week perform transformer operation with help of Engineer 09
32 32th In this week perform EDM operation with help of Engineer 09

9
Chapter3: Work on Machine shop &Workshop

Equipment Safety in Your Machine Shop

 Revisiting Equipment Safety Fundamentals. Cuts, burns, blindness, electrocution,

amputation, name it. ...

 Wear PPE. Wear PPE (personal protective equipment) appropriate to your job.
 Safety Goggles....
 Protective Gloves....
 Respirators....
 Proper Clothing....
 Inspection....
 Slow Down.
 Be professional
 Good housekeeping

Basic Equipment Used in Electrical Shop

1. Vacuum circuit breaker

2. DC motor
3. Transformer
4. AC motor
5. Generator
6. Variable frequency drive
7. Electronic soft starter
8. Hacksaw machine
9. Rolling bending machine
10. Sharing machine
11. Cut off machine
12. Grande
13. Disc cutter

10
 Vacuum Circuit Breaker:
A vacuum circuit breaker is a kind of circuit breaker where the arc quenching takes place in a vacuum
medium. The operation of switching on and closing of current carrying contacts and interrelated arc
interruption takes place in a vacuum chamber in the breaker which is called a vacuum interrupter.

Working Principle of Vacuum Circuit Breaker:

Main Parts of vacuum circuit breaker:

1. Fixed member
2. Movable member
3. Contacts
4. Arc shield
5. Insulating vessel

11
 Dc Motor:
A DC motor is defined as a class of electrical motors that convert direct current electrical energy into
mechanical energy.
From the above definition, we can conclude that any electric motor that is operated using direct current or
DC is called a DC motor. We will understand the DC motor construction and how a DC motor converts
the supplied DC electrical energy into mechanical energy in the next few sections.

Dc Motor Parts Name:

1. Armature winding
2. Field winding
3. Carbon brush
4. Pole winding
5. Commutator
6. Shaft
7. Interpol
8. Frame
9. Pole Shoe
10. Fan

Transformer:
Transformer, device that transfers electric energy from one alternating-current circuit to one or more
other circuits, either increasing (stepping up) or reducing (stepping down) the voltage.

1. Cooling Tubes
2. Conservator Tank
3. Primary winding
12
4. Secondary winding
5. Drain Valve for oil
6. Buchholz relay

13
 Ac Motor:

An AC motor is an electric motor driven by an alternating current (AC). The AC motor commonly
consists of two basic parts, an outside stator having coils supplied with alternating current to produce a
rotating magnetic field, and an inside rotor attached to the output shaft producing a second rotating
magnetic field. The rotor magnetic field may be produced by permanent magnets, reluctance saliency, or
DC or AC electrical windings.
Ac Motor Parts Name:
1. Rotor
2. Stator
3. Bearing
4. Yoke
5. Shaft
6. Pole
7. Connection box
8. Fan cover
9. End ball
10. Carbon Brush

Variable Frequency Drive:

A variable-frequency drive (VFD) is a type of motor drive used in electro-mechanical drive systems to
control AC motor speed and torque by varying motor input frequency and, depending on topology, to
control associated voltage or current variation. VFDs may also be known as 'AFDs' (adjustable-frequency
drives), 'ASDs' (adjustable-speed drives), 'VSDs' (variable-speed drives), 'AC drives', 'micro drives',
'inverter drives' or, simply, 'drives.
14
Generator

n electric generator is a device that converts mechanical energy obtained from an external source into
electrical energy as the output.
It is important to understand that a generator does not actually ‘create’ electrical energy. Instead, it uses
the mechanical energy supplied to it to force the movement of electric charges present in the wire of its
windings through an external electric circuit. This flow of electric charges constitutes the output electric
current supplied by the generator. This mechanism can be understood by considering the generator to
be analogous to a water pump, which causes the flow of water but does not actually ‘create’ the water
flowing through it.
The modern-day generator works on the principle of electromagnetic induction discovered by Michael
Faraday in 1831-32. Faraday discovered that the above flow of electric charges could be induced by
moving an electrical conductor, such as a wire that contains electric charges, in a magnetic field. This
movement creates a voltage difference between the two ends of the wire or electrical conductor, which
in turn causes the electric charges to flow, thus generating electric current.

15
Chapter4

Conclusion

The Training section is a key element in the technical writing student's professional
preparation. And the training report is a key element in the internship experience. It is
through writing the report that the maturity and professional experience the student gained as
an intern becomes fully realized. It is through the report that the student exercises his or her
critical and analytical faculties and demonstrates newly found skills and identity as a
Professional communicator.

Even in a short report, it is useful to include a conclusion. A conclusion demonstrates good

organization. When written well, it can help make the reader’s task easier. With a good
conclusion, you can pull all the threads of the report details together and relate them to the
initial purpose for writing the report. In other words, the conclusion should confirm for
therapeutant the report’s purpose has been achieved.
Appendix:

16
Main office

WCM

17
18
 Daily Training Log Book
Training Information:

Personal
Information

Student Name: Sajjad Ali

Student Roll No: SCO4-BTEL-F20-164

Course of Study: BSc Electrical Engineering Technology

Technology: Year of study: 2020 To 2024

Training Start Date: 01-Oct-2020

Training End Date:10-Oct-2021

Training Organization

Name: Harbin Electric International.

Address: 10KM Faisalabad Road Sheikhupura

Contact Person: Sir Muhammad Zeeshan

Contact No: +923014184983

19
 Daily Training Log Sheet

Training Week: 01

(Please specify training information by descriptive statement, tables,

sketches, figures and etc.)

Date Time Entry

08:00 am to 5:00 In this week learn all safety equipment use in
05-10-2020 pm Lunch break work shop.
1:00 pm to 2;00 pm
To

09-10-2020

Note: Please include attachment whenever necessary

Declaration

I hereby declare that all information provided above is true.

Signed by Trainee Date Signed by Supervisor

20
 Daily Training Log Sheet

Training Week: 02

(Please specify training information by descriptive statement, table, sketches.

Figure send etc.)

Date Time Entry

08:00 am to 5:00 In this week learn all safety equipment use in
work shop.
12-10-2020 pm Lunch break
1:00 pm to 2;00 pm
To

16-10-2020

Note: Please include attachment whenever

Necessary Declaration

I hereby declare that all information provided above is true.

Signed by Trainee Date Signed by Supervisor

21
 Daily Training Log Sheet

Training Week: 03

(Please specify training information by descriptive statement, tables,

sketches, figures and etc.

Date Time Entry

08:00 am to 5:00 In this week learn about vacuum circuit breaker.
19-10-2020 Lunch break
1:00 pm to 2;00 pm
To

23-10-2020

Note: Please include attachment whenever necessary

Declaration

I hereby declare that all information provided above is true.

Signed by Trainee Date Signed by Supervisor

22
 Daily Training Log Sheet

Training Week: 04

(Please specify training information by descriptive statement, tables, sketches,

figures and etc.

Date Time Entry

08:00 am to 5:00 In this week learn about vacuum circuit breaker.
26-10-2020 Lunch break
1:00 pm to 2;00 pm
To

29-10-2020

Note: Please include attachment whenever necessary

Declaration

I hereby declare that all information provided above is true.

Signed by Trainee Date Signed by Supervisor

23
 Daily Training Log Sheet

Training Week: 05

(Please specify training information by descriptive statement, tables,

sketches, figures and etc.

Date Time Entry

08:00 am to 5:00 In this week learn about all device use on
02-11-2020 Lunch break vacuum circuit breaker.
1:00 pm to 2;00 pm
To

06-11-2020

Note: Please include attachment whenever necessary

Declaration

I hereby declare that all information provided above is true.

Signed by Trainee Date Signed by Supervisor

24
25
 Daily Training Log Sheet

Training Week: 06

(Please specify training information by descriptive statement, tables,

sketches, figures and etc.)

Date Time Entry

08:00 am to 5:00 In this week learn about dc motor.
10-11-2020 Lunch break
1:00 pm to 2;00 pm
To

13-11-2020

Note: Please include attachment whenever necessary

Declaration

I hereby declare that all information provided above is true

Signed by Trainee Date Signed by Supervisor

26
 Daily Training Log Sheet

Training Week: 07

(Please specify training information by descriptive statement, tables,

sketches, figures and etc.)

Date Time Entry

08:00 am to 5:00 In this week learn about dc motor
16-11-2020 Lunch break operation.
1:00 pm to 2;00 pm
To

20-11-2020

Note: Please include attachment whenever necessary

Declaration

I hereby declare that all information provided above is true.

Signed by Trainee Date Signed by Supervisor

27
28
 Daily Training Log Sheet

Training Week: 08

(Please specify training information by descriptive statement, tables,

sketches, figures and etc.)

Date Time Entry

08:00 am to 5:00 In this week learn about all device use on dc
23-11-2020 Lunch break motor.
1:00 pm to 2;00 pm
To

27-11-2020

Note: Please include attachment whenever necessary

Declaration

I hereby declare that all information provided above is true.

Signed by Trainee Date Signed by Supervisor

29
 Daily Training Log Sheet

Training Week: 09

(Please specify training in formation by descriptive statement, tables,

sketches, figures and etc.)

Date Time Entry

08:00 am to 5:00 Learn about transformer.
30-11-2020 Lunch break
1:00 pm to 2;00 pm
To

04-12-2020

Note: Please include attachment whenever

Necessary Declaration

I hereby declare that all information provided above is true.

Signed by Trainee Date Signed by Supervisor

30
 Daily Training Log Sheet

Training Week: 10

(Please specify training information by descriptive statement, tables,

sketches, figures and etc.)

Date Time Entry

08:00 am to 5:00 Learn about transformer.
07-12-2020 Lunch break
1:00 pm to 2;00 pm
To

11-12-2020

Note: Please include attachment whenever necessary

Declaration

I hereby declare that all information provided above is true.

Signed by Trainee Date Signed by Supervisor

31
 Daily Training Log Sheet

Training Week: 11

(Please specify training information by descriptive statement, tables,

sketches, figures and etc.)

Date Time Entry

08:00 am to 5:00 Learn about device that use on transformer.
14-12-2020 Lunch break
1:00 pm to 2;00 pm
To

18-12-2020

Note: Please include attachment whenever necessary

Declaration

I hereby declare that all information provided above is true.

Signed by Trainee Date Signed by Supervisor

32
 Daily Training Log Sheet

Training Week: 12

(Please specify training information by descriptive statement, tables,

sketches, figures and etc.)

Date Time Entry

08:00 am to 5:00 In this week learn about ac motor.
21-12-2020 Lunch break
1:00 pm to 2;00 pm
To

24-12-2020

Note: Please include attachment whenever necessary

Declaration

I hereby declare that all information provided above is true.

Signed by Trainee Date Signed by Supervisor

33
 Daily Training Log Sheet

Training Week: 13

(Please specify training information by descriptive statement, tables,

sketches, figures and etc.)

Date Time Entry

08:00 am to 5:00 In this week learn about ac motor
28-12-2020 Lunch break operation.
1:00 pm to 2;00 pm
To

01-01-2021

Note: Please include attachment whenever necessary

Declaration

I hereby declare that all information provided above is true.

Signed by Trainee Date Signed by Supervisor

34
 Daily Training Log Sheet

Training Week: 14

(Please specify training information by descriptive statement, tables,

sketches, figures and etc.)

Date Time Entry

08:00 am to 5:00 In this week learn about device use on ac
04-01-2021 Lunch break motor.
1:00 pm to 2;00 pm
To

08-01-2021

Note: Please include attachment whenever necessary

Declaration

I hereby declare that all information provided above is true.

Signed by Trainee Date Signed by Supervisor

35
 Daily Training Log Sheet

Training Week: 15

(Please specify training information by descriptive statement, tables,

sketches, figures and etc.)

Date Time Entry

08:00 am to 5:00 In this week learn about generator.
11-01-2021 Lunch break
1:00 pm to 2;00 pm
To

15-01-2021

Note: Please include attachment whenever necessary

Declaration

I hereby declare that all information provided above is true.

Signed by Trainee Date Signed by Supervisor

36
 Daily Training Log Sheet

Training Week: 16

(Please specify training information by descriptive statement, tables,

sketches, figures and etc.)

Date Time Entry

08:00 am to 5:00 In this week learn about generator
18-01-2021 Lunch break operation.
1:00 pm to 2;00 pm
To

22-01-2021

Note: Please include attachment whenever necessary

Declaration

I hereby declare that all information provided above is true.

Signed by Trainee Date Signed by Supervisor

37
 Daily Training Log Sheet

Training Week: 17

(Please specify training information by descriptive statement, tables,

sketches, figures and etc.)

Date Time Entry

08:00 am to 5:00 In this week learn about device use on
25-01-2021 Lunch break generator.
1:00 pm to 2;00 pm
To

29-01-2021

Note: Please include attachment whenever necessary

Declaration

I hereby declare that all information provided above is true.

.

Signed by Trainee Date Signed by Supervisor

38
 Daily Training Log Sheet

Training Week: 18

(Please specify training information by descriptive statement, tables,

sketches, figures and etc.)

Date Time Entry

08:00 am to 5:00 In this week learn about variable frequency drive.
01-02-2021 Lunch break
1:00 pm to 2;00 pm
To

04-02-2021

Note: Please include attachment whenever necessary

Declaration

I hereby declare that all information provided above is true.

.

Signed by Trainee Date Signed by Supervisor

39
 Daily Training Log Sheet

Training Week: 19

(Please specify training information by descriptive statement, tables,

sketches, figures and etc.)

Date Time Entry

08:00 am to 5:00 In this week learn about variable frequency
08-02-2021 Lunch break drive operation.
1:00 pm to 2;00 pm
To

12-02-2021

Note: Please include attachment whenever necessary

Declaration

I hereby declare that all information provided above is true.

Signed by Trainee Date Signed by Supervisor

40
 Daily Training Log Sheet

Training Week: 20

(Please specify training information by descriptive statement, tables,

sketches, figures and etc.)

Date Time Entry

08:00 am to 5:00 In this week learn about device use on variable
15-02-2021 Lunch break frequency drive.
1:00 pm to 2;00 pm
To

19-02-2021

Note: Please include attachment whenever necessary

Declaration

I hereby declare that all information provided above is true.

.

Signed by Trainee Date Signed by Supervisor

41
 Daily Training Log Sheet

Training Week: 21

(Please specify training information by descriptive statement, tables,

sketches, figures and etc.)

Date Time Entry

08:00 am to 5:00 In this week learn about power hack saw
22-02-2021 Lunch break machine and its work.
1:00 pm to 2;00 pm
To

26-02-2021

Note: Please include attachment whenever necessary

Declaration

I hereby declare that all information provided above is true.

.

Signed by Trainee Date Signed by Supervisor

42
 Daily Training Log Sheet

Training Week: 22

(Please specify training information by descriptive statement, tables,

sketches, figures and etc.)

Date Time Entry

08:00 am to 5:00 In this week learn about disc cutter machine.
01-03-2021 Lunch break
1:00 pm to 2;00 pm
To

05-03-2021

Note: Please include attachment whenever necessary

Declaration

I hereby declare that all information provided above is true.

.

Signed by Trainee Date Signed by Supervisor

43
 Daily Training Log Sheet

Training Week: 23

(Please specify training information by descriptive statement, tables,

sketches, figures and etc.)

Date Time Entry

08:00 am to 5:00 In this week learn about EDM machine.
08-03-2021 Lunch break
1:00 pm to 2;00 pm
To

12-03-2021

Note: Please include attachment whenever necessary

Declaration

I hereby declare that all information provided above is true.

.

Signed by Trainee Date Signed by Supervisor

44
 Daily Training Log Sheet

Training Week: 24

(Please specify training information by descriptive statement, tables,

sketches, figures and etc.)

Date Time Entry

08:00 am to 5:00 In this week learn about EDM machine operation.
15-03-2021 Lunch break
1:00 pm to 2;00 pm
To

19-03-2021

Note: Please include attachment whenever necessary

Declaration

I hereby declare that all information provided above is true.

.

Signed by Trainee Date Signed by Supervisor

45
 Daily Training Log Sheet

Training Week: 25

(Please specify training information by descriptive statement, tables,

sketches, figures and etc.)

Date Time Entry

08:00 am to 5:00 In this week learn about too use on EDM
22-03-2021 Lunch break machine.
1:00 pm to 2;00 pm
To

26-03-2021

Note: Please include attachment whenever necessary

Declaration

I hereby declare that all information provided above is true.

.

Signed by Trainee Date Signed by Supervisor

46
 Daily Training Log Sheet

Training Week: 26

(Please specify training information by descriptive statement, tables,

sketches, figures and etc.)

Date Time Entry

08:00 am to 5:00 In this week learn about NCRIB Cutting machine.
29-03-2021 Lunch break
1:00 pm to 2;00 pm
To

02-04-2021

Note: Please include attachment whenever necessary

Declaration

I hereby declare that all information provided above is true.

.

Signed by Trainee Date Signed by Supervisor

47
48
 Daily Training Log Sheet

Training Week: 27

(Please specify training information by descriptive statement, tables,

sketches, figures and etc.)

Date Time Entry

08:00 am to 5:00 In this week learn about NCRIB Cutting machine
05-04-2021 Lunch break operation.
1:00 pm to 2;00 pm
To

09-04-2021

Note: Please include attachment whenever necessary

Declaration

I hereby declare that all information provided above is true.

Signed by Trainee Date Signed by Supervisor

49
 Daily Training Log Sheet

Training Week: 28

(Please specify training information by descriptive statement, tables,

sketches, figures and etc.)

Date Time Entry

09:00 To 15:00 In this week learn about tools use on NC Rib
12-04-2021 Duty time change Cutting machine.
due to Ramzan
To

16-04-2021

Note: Please include attachment whenever necessary

Declaration

I hereby declare that all information provided above is true.

Signed by Trainee Date Signed by Supervisor

50
 Daily Training Log Sheet

Training Week: 29

(Please specify training information by descriptive statement, tables,

sketches, figures and etc.)

Date Time Entry

09:00 To 15:00 In this week perform Vacuum circuit breaker
19-04-2021 Duty time change operation with help of Supervisor
due to Ramzan
To

23-04-2021

Note: Please include attachment whenever necessary

Declaration

I hereby declare that all information provided above is true.

Signed by Trainee Date Signed by Supervisor

51
 Daily Training Log Sheet

Training Week: 30

(Please specify training information by descriptive statement, tables,

sketches, figures and etc.)

Date Time Entry

09:00 To 15:00 In this week perform dc motor operation with
26-04-2021 Duty time change help of Supervisor
due to Ramzan
To

30-04-2021

Note: Please include attachment whenever necessary

Declaration

I hereby declare that all information provided above is true.

Signed by Trainee Date Signed by Supervisor

52
 Daily Training Log Sheet

Training Week: 31

(Please specify training information by descriptive statement, tables,

sketches, figures and etc.)

Date Time Entry

09:00 To 15:00 In this week perform transformer operation with
03-05-2021 Duty time change help of Supervisor
due to Ramzan
To

07-05-2021

Note: Please include attachment whenever necessary

Declaration

I hereby declare that all information provided above is true.

Signed by Trainee Date Signed by Supervisor

53
 Daily Training Log Sheet

Training Week: 32

(Please specify training information by descriptive statement, tables,

sketches, figures and etc.)

Date Time Entry

09:00 To 15:00 In this week perform EDM operation with help
10-05-2021 Duty time change of Supervisor
due to Ramzan
To

14-05-2021

Note: Please include attachment whenever necessary

Declaration

I hereby declare that all information provided above is true.

Signed by Trainee Date Signed by Supervisor

54
55