Mobilube GX Series Page 1 of 2
Mobilube GX Series
Mobil Commercial-Vehicle-Lube , Singapore
Heavy Duty Automotive Gear Lubricants
Product Description
Mobilube GX 80W-90, 140 are high performance, heavy duty gear lubricants formulated from high quality base oils and an advanced additive system.
These lubricants are engineered for automotive heavy-duty transmissions, axles, and final drives where protection against wear and scoring is required.
They are recommended by ExxonMobil for use in applications where API GL-4 service is required.
Features and Benefits
Today's heavy equipment applications place higher performance demands on drivetrain lubricants. Higher speeds, higher torque, and heavier loads
require improved formulations to maximise equipment life and optimise operating costs. Longer service intervals place additional demands on the gear
lubricant requiring effective basestock and additive systems. Mobilube GX 80W-90, 140 is engineered to meet these challenges. The key benefits include:
Features Advantages and Potential Benefits
Extended gear and bearing life due to minimal deposits
Good thermal stability and resistance to high temperature oxidation
Longer seal life
Excellent rust and corrosion protection Longer component life
Good low temperature lubrication Reduced wear at start-up and ease of start-up
Compatible with typical seals and gaskets Minimum leakage and reduced contamination
Applications
Recommended by ExxonMobil for use in:
• Heavy duty manual transmissions, axles and final drives requiring API GL-4 level performance
• Passenger cars, on highway light and heavy duty trucks, and commercial vehicles
• Off highway industries including: construction, mining, quarrying, and agriculture
• Other heavy duty industrial and automotive applications including hypoid gears operating under moderate to severe conditions
Specifications and Approvals
Mobilube GX Series are also recommended by ExxonMobil for use in applications requiring: 140 80W-90
API GL-4 X
This product is recommended for use in applications requiring: 140 80W-90
API GL-4 X
Properties and Specifications
26.08.2020
Mobilube GX Series Page 2 of 2
Property 140 80W-90
Grade SAE 140 SAE 80W-90
Density @ 15.6 C, g/ml, ASTM D4052 0.91 0.89
Flash Point, Cleveland Open Cup, °C, ASTM D92 260 240
Kinematic Viscosity @ 100 C, mm2/s, ASTM D445 30.0 14.5
Kinematic Viscosity @ 40 C, mm2/s, ASTM D445 447 135
Pour Point, °C, ASTM D97 -6 -33
Viscosity Index, ASTM D2270 95 104
Health and Safety
Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims
/psims.aspx
All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.
04-2020
ExxonMobil Asia Pacific Ltd
1 HarbourFront Place
#06-00 HarbourFront Tower One
Singapore 098633
+65 6885 8000
http://www.exxonmobil.com
Typical Properties are typical of those obtained with normal production tolerance and do not constitute a specification. Variations that do not affect
product performance are to be expected during normal manufacture and at different blending locations. The information contained herein is subject to
change without notice. All products may not be available locally. For more information, contact your local ExxonMobil contact or visit
www.exxonmobil.com
ExxonMobil is comprised of numerous affiliates and subsidiaries, many with names that include Esso, Mobil, or ExxonMobil. Nothing in this document is
intended to override or supersede the corporate separateness of local entities. Responsibility for local action and accountability remains with the local
ExxonMobil-affiliate entities.
Energy lives here™
© Copyright 2003-2019 Exxon Mobil Corporation. All
Rights Reserved
26.08.2020
