Itfreedumps provides the latest online questions for all IT certifications,

such as IBM, Microsoft, CompTIA, Huawei, and so on.

Hot exams are available below.

AZ-204 Developing Solutions for Microsoft Azure

820-605 Cisco Customer Success Manager

MS-203 Microsoft 365 Messaging

HPE2-T37 Using HPE OneView

300-415 Implementing Cisco SD-WAN Solutions (ENSDWI)

DP-203 Data Engineering on Microsoft Azure

500-220 Engineering Cisco Meraki Solutions v1.0

NACE-CIP1-001 Coating Inspector Level 1

NACE-CIP2-001 Coating Inspector Level 2

200-301 Implementing and Administering Cisco Solutions

Share some D-PDD-DY-23 exam online questions below.

1.A backup administrator is investigating the File System Log of their source DD9900. They noticed
an error on the file system and quickly corrected the issue. However, 30 minutes after making the fix,
the error status has not changed.
Why is the error still appearing in the File System Log?
A. System status messages are updated every 45 minutes
B. Corrected errors do not reappear in logs
C. System status messages are updated hourly
D. System status messages are only available through CLI
Answer: C

2.SIMULATION
Task 5
Use the simulator to configure a new MTree with a path of /data/col1/oracle. The MTree size must not
be allowed to exceed 200 TiB.
When you have finished, continue to the next question.

Answer:
To configure a new MTree with a specified path and size limit in PowerProtect DD, follow these steps:
Step 1: Access the MTree Management Section
In the DD System Manager interface, locate Data Management in the sidebar.
Select MTree from the dropdown menu to manage MTrees.
Step 2: Create a New MTree
Click on Create MTree or Add MTree (the exact button label may vary).
Set the Path for the MTree as /data/col1/oracle.
Step 3: Set the MTree Size Limit
In the MTree creation dialog, look for an option to set a Quota or Size Limit for the MTree.
Set the Size Limit to 200 TiB to ensure the MTree does not exceed this capacity.
Step 4: Save the Configuration
Confirm and save your settings to create the MTree with the specified path and size restriction.
After these steps, you should have a new MTree at /data/col1/oracle with a maximum allowed size of
200 TiB. Let me know if further assistance is required!

3.What are the steps to configure the Retention Lock Compliance?

Answer:
4.An administrator must display the compression statistics for all files and directories in the file system
for the last 7 days and the last 24 hours.
Which command is used to gather this information?
A. storage show
B. mtree show
C. filesys report
D. quota show
Answer: C
Explanation:
The filesys report command provides detailed compression statistics, essential for administrators to
monitor storage efficiency over time. This insight into compression ratios aids in storage optimization
and management planning on PowerProtect DD systems.

5.A company has DD Retention Lock Compliance enabled on an MTree. The file system is disabled
due to tampering of the system clock.
Which user role has the privilege required to enable the file system?
A. Security Officer
B. Admin
C. Limited Admin
D. Tenant Admin
Answer: A

6.A customer needs a backup system to protect 100 TB of mission-critical data.

What should be used to back up the system?
A. cloud tier
B. DD6900
C. DD3300
D. DDVE
Answer: A

7.When using CIFS from a PowerProtect DD system, what should be changed on a Windows
machine?
A. SMBTimeout to 7200 seconds
B. CIFSTimeout to 3600 seconds
C. SESSTIMEOUT to 7200 seconds
D. SESSTIMEOUT to 3600 seconds
Answer: D

8.What are the settings for serial communication when connecting to a PowerProtect DD appliance?
A. 57600, 8, 1, none, Xon/Xoff, and vt-100
B. 57600, 8, 1, none, none, and vt-100
C. 115200, 8, 1, none, none, and vt-100
D. 115200, 8, 1, none, Xon/Xoff, and vt-100
Answer: C

9.What is the correct sequence of operations used by the PowerProtect DD DIA in the end-to-end
verification process?

Answer:

10.An administrator is configuring an AWS S3 cloud unit on their DD9400.

Which certificate must be imported before adding the cloud unit?
A. GlobalSign Root R1
B. Baltimore CyberTrust Root CA
C. S3 Flexible
D. GlobalSign Root R2
Answer: B

11.Which component executes the read/write requests in a backup environment consisting of a

PowerProtect DD appliance and IBM Spectrum Protect?
A. Spectrum Protect Server
B. Media Server
C. Media Agent
D. Master Server
Answer: C

12.SIMULATION
Task 7
An engineer is implementing a new PowerProtect DD system. Retention Lock Compliance Edition is
required.
Use the simulator to ensure that the account asterix1 with the password password2 is in place and
the correct role assigned. Set the password to be required to change after 180 days.
When you have finished, continue to the next question.
Answer:
To configure a user account for Retention Lock Compliance Edition with specific role and password
policies on a PowerProtect DD system, follow these steps: Step 1: Access the User Management
Section
In the DD System Manager interface, go to Administration or Users (exact location may vary).
Look for an option to manage user accounts.
Step 2: Create or Verify the Account
If the account asterix1 already exists:
Select the user and edit the properties.
If the account does not exist:
Click on Add User or Create New User.
Enter the Username as asterix1.
Set the Password as password2.
Step 3: Assign the Compliance Role
Ensure that asterix1 is assigned the correct role, which is usually Security Officer or a similar role
necessary for Retention Lock Compliance.
This role allows the user to manage and enforce compliance-related settings on the system.
Step 4: Set Password Expiration Policy
Configure the Password Aging Policy:
Set Password Expiration or Maximum Days to 180 days.
Ensure Minimum Days and Warning Days are set as needed or required by the compliance policy.
Step 5: Save and Verify
Save the changes and verify that the account asterix1 is now listed with the appropriate role and
password settings.
This configuration ensures that the asterix1 account is in place with the correct permissions and that
the password is set to expire after 180 days. Let me know if you need more assistance!

13.A storage administrator finished the zoning between the PowerProtect DD and the NetWorker
backup server.
How can they verify that the zoning was completed properly and the server HBA are visible?
A. scsitarget initiator show list
B. scsitarget show initiator list
C. scsitarget show initiator
D. scsitarget initiator list
Answer: A

14.Which systems support the FS25 enclosure?

A. DD9800, DD9900, and DD6900 (HA Only)
B. DD6900 (HA Only), DD9400 (HA Only), and DD9900 (HA Only)
C. DD3300, DD6800, and DD9900
D. DD9900, DD6900, and DD9400
Answer: D
Explanation:
The FS25 enclosure is compatible with DD9900, DD6900, and DD9400, providing additional storage
capacity and performance capabilities tailored for high-demand PowerProtect DD deployments.

15.SIMULATION
Task4
An administrator needs to create a new non-admin user and a storage unit for their Oracle 'abc123'
department.
Use the simulator to:
- Create a new user: 'DDBoostOracle' with password: Password123, management role: none, with
Password Aging Policy: Minimum Days: 0, Maximum Days: 180, Warn Days: 15 days
- Assign the user to the ddboost users.
- Create a new storage unit called: SU_Oracle and assign new user to the storage unit.
Answer:
To create a new non-admin user and a storage unit for an Oracle department on PowerProtect DD,
follow these steps:
Step 1: Create the User "DDBoostOracle"
Navigate to the User Management Section:
Look under Administration or Users in the sidebar (the exact location may vary by DD OS version).
Create New User:
Click on Add User or New User.
Enter Username: DDBoostOracle
Enter Password: Password123
Set Management Role to None.
Set Password Aging Policy:
Set Minimum Days: 0
Set Maximum Days: 180
Set Warn Days: 15
Assign the User to DD Boost Users Group:
Locate the option to assign the user to groups and select the ddboost users group.
Save User Configuration:
Confirm and save the settings to create the user.
Step 2: Create the Storage Unit "SU_Oracle"
Navigate to DD Boost Protocol:
Go to Protocols > DD Boost in the sidebar.
Create a New Storage Unit:
Find Storage Units and select Add Storage Unit.
Name the storage unit as SU_Oracle.
Assign the User to the Storage Unit:
During the creation process or in the access settings of the storage unit, assign DDBoostOracle as
the user with access.
Save Storage Unit Configuration:
Confirm and save the configuration to ensure that the new user has access to the storage unit. This
completes the setup for a non-admin user with the specified password aging policy and a dedicated
storage unit for the Oracle department. Let me know if additional steps are needed!
16.For third-party backup applications that do not natively support DD Boost, where does the DD
Boost plug-in need to be installed?
A. On the backup server
B. On each media server
C. On the PowerProtect DD
D. On each backup client
Answer: B
Explanation:
The DD Boost plug-in must be installed on each media server to enable optimized data deduplication
and efficient data transfer, especially for applications that do not natively support DD Boost
integration.

17.What is a use case of BoostFS?

A. To increase DD Boost throughput
B. To enable snapshot on DD Boost data
C. To protect applications that do not support DD Boost
D. To implement DD Boost over Fibre Channel
Answer: C
Explanation:
BoostFS allows applications without native DD Boost support to leverage DD Boost’s deduplication
benefits. It provides a seamless data protection layer across various backup applications by
streamlining storage and data transfer processes. BoostFS, or Boost File System, is used to enable
backup functionality for applications that do not natively support DD Boost. It allows these
applications to leverage Data Domain storage efficiency by providing a file system interface. BoostFS
essentially provides a method for applications without DD Boost integration to still utilize deduplication
and other Data Domain benefits, making it highly effective for environments that want to standardize
their storage approach but have a mix of applications with and without DD Boost support.

18.Which feature helps to ensure that data immutability is maintained on a PowerProtect DD system?
A. DD Retention Lock
B. Encryption
C. Secure Multi-Tenancy
D. DD Replicator
Answer: A
Explanation:
DD Retention Lock enforces data immutability, ensuring that critical data cannot be altered or deleted
until its retention period expires. This feature is essential for regulatory compliance and data integrity
in long-term storage.

19.A customer needs to configure a pair of PowerProtect DD6900 systems to use high availability.
Which expansion shelf is required?
A. FS25
B. DS60
C. ES40
D. ES25
Answer: A

20.DRAG DROP
Put the steps in correct order to create a mount on a backup server and copy a test file to a
PowerProtect DD appliance over NFS.
Answer:

Explanation:
The correct order of steps to create a mount on a backup server and copy a test file to a
PowerProtect DD appliance over NFS is as follows:
Create the NFS directory (mount point).
Create a backup directory on the backup server.
Mount the PowerProtect DD directory or MTree on the new mount point.
Create and copy a file from the backup server to the PowerProtect DD appliance to validate
functionality.
Create the NFS Directory (Mount Point): The first step is to set up the NFS directory or mount point
on the backup server. This directory will serve as the destination where the PowerProtect DD
appliance will be mounted.
Create a Backup Directory on the Backup Server: Once the mount point is ready, create a dedicated
directory on the backup server to store backups. This directory structure helps organize data and
ensures backups are written to the correct location.
Mount the PowerProtect DD Directory or MTree on the New Mount Point: Use the NFS protocol to
mount the specified PowerProtect DD directory (or MTree) onto the created mount point. This step
establishes the connection between the backup server and the PowerProtect DD appliance. Create
and Copy a File from the Backup Server to the PowerProtect DD Appliance to Validate Functionality:
Finally, to confirm that the mount is correctly configured and functional, create a test file on the
backup server and copy it to the PowerProtect DD appliance. This test ensures that the server can
write data to the appliance over the NFS mount.
This ordered sequence ensures a successful setup of the mount and verifies the connectivity and
functionality of the NFS configuration on the PowerProtect DD system.

21.A PowerProtect DD system is configured to with VTL. The backup application requires a minimum
tape capacity of 1.5 TiB.
What is the minimum tape type to support this requirement?
A. LTO-5
B. LTO-6
C. LTO-3
D. LTO-4
Answer: A

22.What rule must be followed during an upgrade procedure with the FS25 expansion shelf?
A. FS25 shelf is cabled on a separate private chain
B. For high performance, the connections from a controller to FS25 shelves must be over FC cables
C. FS25 shelf must be on the same chain with DS60
D. If ES40 SAS shelves are on the same chain as an FS25, the maximum number of shelves on that
chain is five
Answer: A

23.When selecting a PowerProtect DD model, which standard practices should be used to

conservatively calculate capacity and throughput?
A. Capacity: First full backup + First incremental backup + (Weekly cycle * Number of weeks data is
retained)
Throughput: Size of average backup / Backup window time
Allow for a minimum 20% buffer in both capacity and throughput
B. Capacity: First full backup + Incremental backups + (Weekly cycle * Number of weeks data is
retained)
Throughput: Size of largest backup / Backup window time
Allow for a minimum 10% buffer in both capacity and throughput
C. Capacity: First full backup + First incremental backup + (Weekly cycle * Number of weeks data is
retained)
Throughput: Size of average backup / Backup window time
Allow for a minimum 10% buffer in both capacity and throughput
D. Capacity: First full backup + Incremental backups + (Weekly cycle * Number of weeks data is
retained)
Throughput: Size of largest backup / Backup window time
Allow for a minimum 20% buffer in both capacity and throughput
Answer: D

24.What is a characteristic of Dell Cloud Tier?

A. Scales to the maximum capacity of the active tier
B. The VTL vault cannot be stored in cloud tier storage
C. NFS, HTTPS, and CIFS are supported for data movement
D. Managed through a single namespace
Answer: D

25.A customer needs help deploying a shared PowerProtect DD. They ask for best practices when
configuring SMT.
What network-related attributes must they configure to increase the security of each tenant unit?
A. - Tenant unit Hostname
- Local Data Access IP addresses
- Remote Data Access IP Addresses
- Default Gateway
B. - Tenant Unit IP Addresses
- Tenant Unit Firewall Ports
- Remote Data Access IP
- Addresses Default Gateway
C. - Local Data Access IP addresses
- Remote Data Access IP Addresses
- Default Gateway
- Tenant Unit Firewall Ports
D. - Remote Data Access IP
- Addresses Default Gateway
- Tenant Unit Virtual Interfaces
- Tenant Unit Hostname
Answer: A

26.Which condition exists for a backup infrastructure based on PowerProtect DD?

A. Compressed files must be decompressed before being sent to PowerProtect DD.
B. Backup clients can write data directly to the PowerProtect DD appliance.
C. VTL can be used to move physical tapes to a DR location.
Answer: B
Explanation:
PowerProtect DD appliances allow direct data writing from backup clients, which improves efficiency
and data transfer rates, leveraging DD Boost and other protocols for optimized backup performance
without intermediate processing. In a PowerProtect DD backup infrastructure, backup clients are
designed to write data directly to the appliance. This direct write capability is supported by protocols
like DD Boost, which enhances the backup performance by offloading deduplication to the client side,
reducing network bandwidth usage and speeding up backups. PowerProtect DD systems are
optimized to handle direct data ingestion from backup clients, streamlining the data protection
process without requiring intermediate storage or decompression steps. This feature simplifies the
backup architecture and improves data protection efficiency.

27.A PowerProtect DD appliance has been installed at a company’s location for several months and
has reached a steady state.
As a best practice, at what percentage of disk utilization should action be taken?
A. 60%
B. 70%
C. 80%
D. 95%
Answer: A

28.An administrator notices that several disks on a shelf show as unknown.

What should be done to resolve this issue?
A. Enter the disk unfail command for the unknown disks
B. Enter the storage add enclosure command
C. Ensure the expansion shelf is cabled properly
D. Cycle the power on the newly added expansion shelf
Answer: A

29.Which command is used to check if NFS is enabled?

A. nfs enable
B. nfs status
C. nfs show clients
 D. system show
Answer: B

30.An administrator is scaling Cloud Tier for a DD9900 by adding a second cloud unit.
What is the required amount of metadata storage (TB)?
A. 120
B. 240
C. 300
D. 500
Answer: C

Get D-PDD-DY-23 exam dumps full version.

Powered by TCPDF (www.tcpdf.org)