Catalog

Number

Notes

FEATURES & SPECIFICATIONS

INTENDED USE — For wall or ceiling mounting, vertical or horizontal. The WL combines digital LED lighting
Type
and controls technologies with high-performance optical design to offer the most advanced wall-mount
luminaire for general ambient lighting applications. High-efficacy light engine delivers long life and excellent
color, ensuring a superior quality lighting installation that is highly efficient and sustainable.
CONSTRUCTION — Housing is roll formed from code-gauge steel.
Refractor is retained in die cast ends providing secure installation and easy maintenance.
Decorative die-cast end caps provide added durability.
Finish: End caps are post-painted in white polyester powder coat for smooth finish. Post-painted channel Wall bracket & Surface Mount LED
available by selecting PAF option.
OPTICS — Impact modified linear faceted refractor. Optically engineered for superior light distribution

WL4
and maximum efficacy.
Crescent-shape linear faceted refractor system obscures and integrates individual LED images and uniformly
washes fixture surface with light.
ELECTRICAL — Long-life LEDs, coupled with high-efficiency drivers, provide superior quantity and quality
of illumination for extended service life. 90% LED lumen maintenance at 60,000 hours (L90/60,000). The
LEDs have a CRI of 82. 4'
eldoLED driver options deliver choice of dimming range and choice for control, while assuring flicker-free, LED
low-current inrush, 89% efficiency and low EMI.
Driver disconnect provided where required to comply with US and Canadian codes.
Optional nLight® embedded controls continuously monitor system performance and allow for constant
lumen management function.
Lumen Management: Unique lumen management system (option N80) provides onboard intelligence that
actively manages the LED light source so that constant lumen output is maintained over the system life,
preventing energy waste created by the traditional practice of over-lighting.
SENSOR — Integrated sensor (individual control): Sensor Switch MSD7 (Passive Infrared (PIR))
integrated occupancy sensor photocell allows the luminaire to power off when the space is unoccupied.
See page 4 for more details on the integrated sensor.
Integrated Sensor (nLight Wired Networking): The sensor is nLight-enabled, meaning it has the
ability to communicate over an nLight network. When wired using CAT-5 cabling with other nLight-enabled
sensors, power packs, or WallPods, an nLight control zone is created. Once linked to a Gateway, directly or
via a Bridge, the zone becomes capable of remote status monitoring and control via SensorView software.
See page 4 for the nLight sensor options. Embed nLight® controls today. Prepare for tomorrow.
Interated Smart Sensor (nLight AIR Wireless Platform): The RES7 sensor is nLight AIR enabled, meaning
it has the ability to communicate over the wireless nLight control platform. It is available with an automatic Now Tomorrow
dimming photocell, and either a digital PIR or a dual technology occupancy sensor. It pairs to other luminaires
and wall switches through our mobile app, CLAIRITY, which allows for simple sensor adjustment. See page User-friendly install Scalability
4 for more details on the Integrated Smart Sensor.
LISTINGS — CSA certified to meet U.S. and Canadian standards. Suitable for damp location.
Enhanced energy savings Space configuration
Patents pending. DesignLights Consortium® (DLC) qualified product. Not all versions of this product may be
DLC qualified. Please check the DLC Qualified Products List at www.designlights.org/QPL to confirm which
Code compliance Future-ready
versions are qualified.
BUY AMERICAN ACT — Product with the BAA option is assembled in the USA and meets the Buy
America(n) government procurement requirements under FAR, DFARS and DOT regulations. Please refer to
www.acuitybrands.com/buy-american for additional information.
WARRANTY — 5-year limited warranty. This is the only warranty provided and no other statements
in this specification sheet create any warranty of any kind. All other express and implied warranties are
disclaimed. Complete warranty terms located at: www.acuitybrands.com/support/warranty/terms-and-
conditions
NOTE: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Specifications subject to change without notice.

Capable Luminaire
This item is an A+ capable luminaire, which has been designed and tested
to provide consistent color appearance and out-of-the-box control compatibility
with simple commissioning.
• All configurations of this luminaire meet the Acuity Brands’ specification for
chromatic consistency
• This luminaire is part of an A+ Certified solution for nLight® or XPoint™ Wireless
control networks when ordered with drivers marked by a shaded background*
To learn more about A+, visit www.acuitybrands.com/aplus.
*See ordering tree for details

COMMERCIAL INDOOR WL4-LED

WL4 Wall Bracket & Surface Mount LED
A+ Capable options indicated
by this color background.

ORDERING INFORMATION Lead times will vary depending on options selected. Consult with your sales representative. Example: WL4 30L EZ1 LP840
WL4
Series Lumens 1 Voltage Driver Color temperature nLight Interface

WL4 4' wall-mount LED 20L 2000 lumens (blank) MVOLT EZ1 eldoLED dims to 1%, 0-10V LP830 3000 K nLight Wired
30L 3000 lumens 347 347V EZB eldoLED dims to dark, 0-10V LP835 3500 K (blank) No nLight® interface
40L 4000 lumens GZ1 Dims to 1% LP840 4000 K N80 nLight® with 80% lumen
(0-10V dimming)2 LP850 5000 K management
GZ10 Dims to 10% N80EMG nLight® with 80% lumen
(0-10V dimming)2 management. For use with
SLD Step-level dimming3 generator supply EM power 4
N100 nLight® without lumen
management
N100EMG nLight® without lumen
management. For use with
generator supply EM power 4
nLight Wireless
(blank) No nLight® interface
NLTAIR2 nLight® Air Generation 2 enabled 5

Control 6 Standby mode 9 Options Finish 12

nLight Wired (blank) Fixture turns off when unoccupied EL7L 700 nominal lumen battery (blank) White
(blank) No nLight control DIM10 Fixture dims to approximately 10% pack (Noncompliant with PAF Paint After
light output when unoccupied CA T20) 11 Fabrication
NES7 nLight® nES 7 PIR integral occupancy sensor 7
DIM50 Fixture dims to approximately 50% EL14L 1400 nominal lumen battery White
NESPDT7 nLight® nES PDT 7 dual technology integral occupancy control 7 pack (Noncompliant with
light output when unoccupied
NES7ADCX nLight® nES 7 ADCX PIR integral occupancy sensor with CA T20) 11
automatic dimming photocell 7 NOC NOC Occupancy sensor disabled 10
E10WLCP EM Self-Diagnostic battery
nLight Wireless pack, 10W Constant Power,
Certified in CA Title 20
RES7 nLight AIR control with PIR integral occupancy sensor and MAEDBS 11
automatic dimming photocell
SC Surface conduit end cap
RES7PDT nLight AIR control with PDT dual technology integral occupancy provisions
sensor and automatic dimming photocell
BAA Buy America(n) Act
Individual Control Compliant
MSD7 Sensor Switch® MSD 7 PIR Integral Occupancy Control 8 BDP Factory Installed Ballast
Disconnect Plug

Notes
1 Approximate lumen output.
2 Not available with any Controls or sensor options.
3 Not available with nLight Interface or Controls.
4 nLight EMG option requires a connection to existing nLight network. Power is
provided from a separate N80 or N100 enabled fixture
5 Must order with RES7, RES7PDT, or module. Only availble with EZ1 driver.
6 See sensor options on page 4.
7 Requires N80, N100, N80EMG, or N100EMG.
8 Not available with nLight options or EZB.
9 Not available with nLight Wireless sensor options.
10 Can only be ordered in conjunction with EZ1, NLTAIR2, RES7/RES7PDT. Occupancy sensor
disabled at factory but can be re-enabled upon commissioning.
11 Not available with 347V.
12 For additional paint finishes, refer to Architectural Colors.

WL4-LED

COMMERCIAL INDOOR: One Lithonia Way Conyers, GA 30012 Phone: 1-800-705-SERV (7378) www.lithonia.com © 2016-2022 Acuity Brands Lighting, Inc. All rights reserved. Rev. 11/01/22
WL4 Wall Bracket & Surface Mount LED

nLight® Wired Control Accessories:

Order as separate catalog number. Visit www.acuitybrands.com/products/controls/nlight.

WallPod stations Model number Occupancy sensors Model number

On/Off nPODM [color] Small motion 360°, ceiling (PIR / dual tech) nCM 9 RJB / nCM PDT 9 RJB
On/Off & raise/lower nPODM DX [color] Large motion 360°, ceiling (PIR / dual tech) nCM10 RJB / nCM PDT 10 RJB
Graphic touchscreen nPOD GFX [color] Wall switch with raise/lower nWSX PDT LV DX [color]
Photocell controls Model number Cat-5 cable (plenum rated) Model number
Full range dimming nCM ADCX RJB 10' cable CAT5 10FT J1
30' cable CAT5 30FT J1

nLight® AIR Control Accessories:

Order as separate catalog number. Visit www.acuitybrands.com/products/controls/nlightair.

Wall switches Model number

On/Off single pole rPODB [color] G2
On/Off two pole rPODB 2P [color] G2
On/Off & raise/lower single pole rPODB DX [color] G2
On/Off & raise/lower two pole rPODB 2P DX [color] G2
On/Off & raise/lower single pole rPODBZ DX WH G2

ORDERING INFORMATION
rCMS Example: RCMS PDT 10 AR G2

Series/Detection Occupancy Detection Lens (Required) Operating Mode Generation

RCMS nLight AIR occupancy and (blank) PIR Detection 10 Large Motion/Extended Range 360˚ (blank) None G2 Generation 2 compatibility
daylight sensor PDT Dual Tech PIR/ 9 Small Motion/Extended Range 360˚ AIR Auxiliary Relay
Microphonics 6 High Bay 360˚ Lens

RCMS

WL4-LED

COMMERCIAL INDOOR: One Lithonia Way Conyers, GA 30012 Phone: 1-800-705-SERV (7378) www.lithonia.com © 2016-2022 Acuity Brands Lighting, Inc. All rights reserved. Rev. 11/01/22
WL4 Wall Bracket & Surface Mount LED
nLight Platform
nLight embedded fixtures offer: Customers get:
Manual Dimming Convenience and visual comfort for occupants
Motion Sensing and/or Daylight Harvesting Energy savings and code compliance
Fixture or Group Level Control Ability to configure lighting to the space requirements
Flexibility Ease of fixture moves, adds and changes
Wireless Wall Switch (nLight AIR Only) Ease and flexibility of placement
Astronomical and Time of Day Scheduling Energy savings and building security
Scalable Solution nLight controls to grow with your business
Future-Ready nLight platform to set foundation for future upgrades and capabilities

nLight Air Wireless

H H H
N N N

WL Series

Simple as 1,2,3
1. Install the nLight® AIR fixtures with embedded smart sensor
2. Install the wireless battery-powered wall switch

3. With CLAIRITY app, pair the fixtures with the wall switch and if
desired, customize the sensor settings for the desired outcome
nLight AIR rPODB 2P DX Mobile Device

nLight Wired Networking

H H HH
N N N
CAT5e

WL Series

Simple as 1,2,3
1. Install the nLight® Wired fixtures with embedded control
2. Install the nLight Wired wall switch

3. Connect the fixtures using standard CAT5e cables and the devices
will automatically discover each other and work (plug and play) nLight Wired nPODMA

Basic nLight Zone

WL4-LED

COMMERCIAL INDOOR: One Lithonia Way Conyers, GA 30012 Phone: 1-800-705-SERV (7378) www.lithonia.com © 2016-2022 Acuity Brands Lighting, Inc. All rights reserved. Rev. 11/01/22
WL4 Wall Bracket & Surface Mount LED
Sensor Coverage Pattern
Sensor Options Mini 360° Lens
Automatic Occupancy Sensing nLight Wired nLight AIR • Recommended for walking motion detection from mounting heights between 8 ft (2.44 m) and 20
Option
Dimming Photocell PIR PDT Networking Networking ft (6.10 m)
MSD7 X • Initial detection of walking motion along sensor axes at distances of 2x the mounting height up to 15
NES7 X X ft (4.57 m) and 1.75x up to 20 ft (6.10 m).
NES7ADCX X X X • Provides 12 ft (3.66 m) radial detection of small motion when mounted at 9 ft (2.74 m)
NESPDT7 X X • Initial detection will occur earlier when walking across sensor’s field of view than when walking
RES7 X X X directly at sensor
RES7PDT X X X X 9 FT Mounting

5.5 18
4.6 15
3.7 12
2.7 9
1.8 6
0.9 3
0m 0 ft
0.9 3
1.8 6
2.7 9
3.7 12
4.6 15
5.5 18

Integrated Sensor with Individual Control nLight Wired Networking

The MSD7 PIR occupancy sensor is ideal for areas without obstructions and where daylight harvesting The nES 7 is ideal for small rooms without obstructions or areas with primarily walking motion.
may be desired. Suggested applications include, but not limited to, hallways, corridors, storage rooms, Ideal areas include hallways, corridors, storage rooms, and breakrooms. Additionally, the NES7ADCX
and breakrooms or other areas where people are typically moving. includes an integrated photocell, which enables daylight harvesting controls.
For areas like restrooms, private offices, open offices, conference rooms or any space with obstructions,
the nES PDT 7 dual technology sensor is recommended. The nES PDT 7 utilizes both PIR (passive
infrared) and Microphonics technologies to detect occupancy.

nLight AIR Wireless

nLight AIR is the ideal solution for retrofit or new construction spaces where adding additional
wiring can be labor intensive and costly. nLight AIR is available with or without an integral sensor.
The integrated RES7 or RES7PDT smart sensors are part of each luminaire in the nLight AIR network,
which can be grouped to control multiple luminaires. The granularity of control with the digital PIR
occupancy detection and daylight sensing makes a great solution for any application.

Sequence of
SEQUENCE OFOperation
OPERATION Sequence of
SEQUENCE OFOperation
OPERATION
MOTION NO MOTION MOTION MOTION NO MOTION MOTION
MAX MAX

Occupants Room Sensor Occupants Room Sensor

Detected In Unoccupied Detects Detected In Unoccupied Detects
LIGHT LEVEL
LIGHT LEVEL

The Space Motion The Space Motion

MIN MIN
LIGHTS ON 17.5 MIN 2.5 MIN AT LIGHTS OFF LIGHTS ON LIGHTS ON 7.5 MIN 2.5 MIN AT LIGHTS OFF LIGHTS ON
TIME DELAY A 1% LEVEL TIME DELAY A 1% LEVEL

*The presetting on the automatic dimming photocell is 5fc.

WL4-LED

COMMERCIAL INDOOR: One Lithonia Way Conyers, GA 30012 Phone: 1-800-705-SERV (7378) www.lithonia.com © 2016-2022 Acuity Brands Lighting, Inc. All rights reserved. Rev. 11/01/22
WL4 Wall Bracket & Surface Mount LED

Performance Data DIMENSIONS

All dimensions are inches (centimeters) unless otherwise noted.
Lumen package Input watts Lumens LPW
Specifications
20L LP830 18.7 2050 110 3-11/16
Length: with sensor - 50-15/16 (129.40) (9.3)
20L LP835 18.7 2152 115
20L LP840 18.7 2255 121 without sensor - 46-13/16 (118.90)
4-3/4 Without sensor
20L LP850 18.7 2410 129 Height: with sensor - 3-7/8 (9.7) (12.0)
30L LP830 28.2 2952 105 without sensor - 3-11/16 (9.3)
30L LP835 28.2 3095 110 Width: 4-3/4 (12.1) 3-7/8
30L LP840 28.2 3251 115 (9.7)

30L LP850 28.2 3239 115 4-3/4 With sensor

40L LP830 39.5 3927 99 (12.0)
40L LP835 39.5 4124 104
40L LP840 39.5 4325 110 How to Calculate Estimated Lumens in Emergency Mode
40L LP850 39.5 4571 116 Use the formula below to estimate the delivered lumens in emergency mode
Delivered Lumens = 1.25 x P x LPW
P = Ouput power of emergency driver. P = 10W for E10WLCP option.
22-3/8 LPW = Lumen per watt rating of the luminaire. This information is available on the ABL luminaire spec sheet.
(59.4) LPW = Lumen per watt rating of the luminaire. LPW information available in Performance Data section.
2-1/4
(5.7)
1-5/8
(4.1) 3-3/8
(8.1)
1
MOUNTING DATA
(2.5)
For unit installation;
1-3/8 surface ceiling or wall mounting.
(3.5)

46
1 (116.8)
(2.5)
1-5/8
(4.1) 3-3/8
(8.1)

1-3/8 17-3/4
(3.5) (45.1)

WL4-LED

COMMERCIAL INDOOR: One Lithonia Way Conyers, GA 30012 Phone: 1-800-705-SERV (7378) www.lithonia.com © 2016-2022 Acuity Brands Lighting, Inc. All rights reserved. Rev. 11/01/22