Click on Subject/Paper under Semester to enter.

Environmental Sciences
Professional English and Sustainability -
Professional English - - II - HS3252 Discrete Mathematics GE3451
I - HS3152 - MA3354
Statistics and Theory of Computation
Matrices and Calculus Numerical Methods - Digital Principles and - CS3452
3rd Semester

4th Semester
- MA3151 MA3251 Computer Organization
1st Semester

2nd Semester

- CS3351 Artificial Intelligence

Engineering Graphics and Machine Learning
Engineering Physics - - CS3491
- GE3251 Foundation of Data
PH3151
Science - CS3352
Database Management
Physics for
Engineering Chemistry System - CS3492
Information Science Data Structure -
- CY3151 - PH3256 CS3301

Basic Electrical and

Algorithms - CS3401
Problem Solving and Electronics Engineering Object Oriented
Python Programming - - BE3251 Programming - CS3391 Introduction to
GE3151 Operating Systems -
Programming in C -
CS3451
CS3251

Computer Networks - Object Oriented

CS3591 Software Engineering
- CCS356
Compiler Design - Human Values and
5th Semester

CS3501 Embedded Systems Ethics - GE3791

7th Semester

8th Semester
6th Semester

and IoT - CS3691

Cryptography and Open Elective 2
Cyber Security - Open Elective-1 Project Work /
CB3491
Open Elective 3 Intership
Distributed Computing Elective-3
- CS3551 Open Elective 4
Elective-4
Elective 1
Management Elective
Elective-5
Elective 2
Elective-6
 All Computer Engg Subjects - [ B.E., M.E., ] (Click on Subjects to
enter)
Programming in C Computer Networks Operating Systems
Programming and Data Programming and Data Problem Solving and Python
Structures I Structure II Programming
Database Management Systems Computer Architecture Analog and Digital
Communication
Design and Analysis of Microprocessors and Object Oriented Analysis
Algorithms Microcontrollers and Design
Software Engineering Discrete Mathematics Internet Programming
Theory of Computation Computer Graphics Distributed Systems
Mobile Computing Compiler Design Digital Signal Processing
Artificial Intelligence Software Testing Grid and Cloud Computing
Data Ware Housing and Data Cryptography and Resource Management
Mining Network Security Techniques
Service Oriented Architecture Embedded and Real Time Multi - Core Architectures
Systems and Programming
Probability and Queueing Theory Physics for Information Transforms and Partial
Science Differential Equations
Technical English Engineering Physics Engineering Chemistry
Engineering Graphics Total Quality Professional Ethics in
Management Engineering
Basic Electrical and Electronics Problem Solving and Environmental Science and
and Measurement Engineering Python Programming Engineering
 www.BrainKart.com
CS3591 – Computer Networks Unit-1

UNIT I - INTRODUCTION AND APPLICATION LAYER

Data Communication - Networks – Network Types – Protocol Layering – TCP/IP Protocol
suite –OSI Model – Introduction to Sockets - Application Layer protocols: HTTP – FTP –
Email protocols(SMTP - POP3 - IMAP - MIME) – DNS – SNMP

INTRODUCTION TO NETWORKS
 A network is a set of devices (often referred to as nodes) connected by
communication links.
 A node can be a computer, printer, or any other device capable of sending or
receiving data generated by other nodes on the network.
 When we communicate, we are sharing information. This sharing can be local or
remote.

CHARACTERISTICS OF A NETWORK
The effectiveness of a network depends on three characteristics.
1. Delivery: The system must deliver data to the correct destination.
2. Accuracy: The system must deliver data accurately.
3. Timeliness: The system must deliver data in a timely manner.

CRITERIA NECESSARY FOR AN EFFECTIVE AND EFFICIENT

NETWORK
A network must be able to meet a certain number of criteria. The most important of
these are performance, reliability, and security.

Factors that affect the Factors that affect the Factors that affect the
Performance of a network: Reliability of a network: Security of a network:

1. Number of users 1. Efficiency of software. 1.Protecting data from

2. Type of transmission 2. Frequency of failure unauthorized access and
medium 3.Recovery time of a viruses.
3. Capabilities of the network after a failure
connected hardware

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit-1

COMPONENTS INVOLVED IN A NETWORK PROCESS

The five components are:

1. Message - It is the information to be communicated. Popular forms of
information include text, pictures, audio, video etc.
2. Sender - It is the device which sends the data messages. It can be a computer,
workstation, telephone handset etc.
3. Receiver - It is the device which receives the data messages. It can be a
computer, workstation, telephone handset etc.
4. Transmission Medium - It is the physical path by which a message travels from
sender to receiver. Some examples include twisted-pair wire, coaxial cable,
radiowaves etc.
5. Protocol - It is a set of rules that governs the data communications. It represents
an agreement between the communicating devices. Without a protocol, two
devices may be connected but not communicating.

KEY ELEMENTS OF PROTOCOL

 Syntax: Refers to the structure or format of the data, meaning the order in which
they are presented.
 Semantics: Refers to the meaning of each section of bits.
 Timing: Refers to two characteristics. (1). When data should be sent and (2). How
fast they can be sent.

TRANSMISSION MODES
o The way in which data is transmitted from one device to another device is known
as transmission mode.
o The transmission mode is also known as the communication mode.
o Each communication channel has a direction associated with it, and transmission
media provide the direction. Therefore, the transmission mode is also known as a
directional mode.
o The transmission mode is defined in the physical layer.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit-1

Types of Transmission mode

The Transmission mode is divided into three categories:

o Simplex Mode
o Half-duplex Mode
o Full-duplex mode (Duplex Mode)

SIMPLEX MODE

o In Simplex mode, the communication is unidirectional, i.e., the data flow in one
direction.
o A device can only send the data but cannot receive it or it can receive the data but
cannot send the data.
o This transmission mode is not very popular as mainly communications require the
two-way exchange of data. The simplex mode is used in the business field as in
sales that do not require any corresponding reply.
o The radio station is a simplex channel as it transmits the signal to the listeners but
never allows them to transmit back.
o Keyboard and Monitor are the examples of the simplex mode as a keyboard can
only accept the data from the user and monitor can only be used to display the
data on the screen.
o The main advantage of the simplex mode is that the full capacity of the
communication channel can be utilized during transmission.

Advantage of Simplex mode:

o In simplex mode, the station can utilize the entire bandwidth of the
communication channel, so that more data can be transmitted at a time.

Disadvantage of Simplex mode:

o Communication is unidirectional, so it has no inter-communication between
devices.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit-1

HALF-DUPLEX MODE

o In a Half-duplex channel, direction can be reversed, i.e., the station can transmit
and receive the data as well.
o Messages flow in both the directions, but not at the same time.
o The entire bandwidth of the communication channel is utilized in one direction at
a time.
o In half-duplex mode, it is possible to perform the error detection, and if any error
occurs, then the receiver requests the sender to retransmit the data.
o A Walkie-talkie is an example of the Half-duplex mode.
o In Walkie-talkie, one party speaks, and another party listens. After a pause, the
other speaks and first party listens. Speaking simultaneously will create the
distorted sound which cannot be understood.

Advantage of Half-duplex mode:

o In half-duplex mode, both the devices can send and receive the data and also can
utilize the entire bandwidth of the communication channel during the
transmission of data.

Disadvantage of Half-Duplex mode:

o In half-duplex mode, when one device is sending the data, then another has to
wait, this causes the delay in sending the data at the right time.

FULL-DUPLEX MODE

o In Full duplex mode, the communication is bi-directional, i.e., the data flow in
both the directions.
o Both the stations can send and receive the message simultaneously.
o Full-duplex mode has two simplex channels. One channel has traffic moving in
one direction, and another channel has traffic flowing in the opposite direction.
o The Full-duplex mode is the fastest mode of communication between devices.
o The most common example of the full-duplex mode is a Telephone network.
When two people are communicating with each other by a telephone line, both
can talk and listen at the same time.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit-1

Advantage of Full-duplex mode:

o Both the stations can send and receive the data at the same time.

Disadvantage of Full-duplex mode:

o If there is no dedicated path exists between the devices, then the capacity of the
communication channel is divided into two parts.

COMPARISON - SIMPLEX, HALF-DUPLEX AND FULL-DUPLEX MODE

BASIS FOR SIMPLEX HALF-DUPLEX FULL-DUPLEX

COMPARISON MODE MODE MODE

Direction of Communication is Communication is Communication

communication unidirectional. bidirectional, but is bidirectional.
one at a time.

Send/Receive A device can only Both the devices Both the devices
send the data but can send and can send and
cannot receive it or receive the data, receive the data
it can only receive but one at a time. simultaneously.
the data but cannot
send it.

Example Radio, Keyboard, Walkie-Talkie Telephone

and monitor. network.

LINE CONFIGURATION / LINE CONNECTIVITY

Line configuration refers to the way two or more communication devices attach to a
link. A link is a communications pathway that transfers data from one device to another.
There are two possible line configurations:
i. Point to Point (PPP): Provides a dedicated Communication link between two
devices. It is simple to establish. The most common example for Point-to-Point
connection is a computer connected by telephone line. We can connect the two
devices by means of a pair of wires or using a microwave or satellite link.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit-1

ii. MultiPoint : It is also called Multidrop configuration. In this connection two or

more devices share a single link.There are two kinds of Multipoint Connections.

 Spatial Sharing: If several devices can share the link simultaneously,

it is called Spatially shared line configuration

 Temporal (Time) Sharing: If users must take turns using the link ,
then its called Temporally shared or Time Shared Line Configuration.

NETWORK TOPOLOGY
Two or more devices connect to a link. Two or more links form a topology.Topology is
defined as
(1) The way in which a network is laid out physically.
(2)The geometric representation of the relationship of all the links and nodes to
one-another.
The various types of topologies are : Bus, Ring, Tree, Star, Mesh and Hybrid.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit-1

BUS TOPOLOGY

 Bus topology is a network type in which every computer and network device is
connected to single cable.
 The long single cable acts as a backbone to link all the devices in a network.
 When it has exactly two endpoints, then it is called Linear Bus topology.
 It transmits data only in one direction.

Advantages of Bus Topology Disadvantages of Bus Topology

1. It is cost effective. 1. Cables fails then whole network fails.
2. Cable required is least compared to 2. If network traffic is heavy or nodes are
other network topology. more, the performance of the network
3. Used in small networks. decreases.
4. It is easy to understand. 3. Cable has a limited length.
5. Easy to expand joining two cables 4. It is slower than the ring topology.
together

RING TOPOLOGY

 In a ring topology, each device has a dedicated point-to-point connection with

only the two devices on either side of it.
 A signal is passed along the ring in one direction, from device to device, until it
reaches its destination.
 Each device in the ring incorporates a repeater.
 When a device receives a signal intended for another device, its repeater
regenerates the bits and passes them along.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit-1

Advantages of Ring Topology Disadvantages of Ring Topology

1. Transmitting network is not affected by 1. Troubleshooting is difficult in ring
high traffic or by adding more nodes, topology.
as only the nodes having tokens can 2. Adding or deleting the computers
transmit data. disturbs the network activity.
2. Cheap to install and expand 3. Failure of one computer disturbs the
whole network

TREE TOPOLOGY

 It has a root node and all other nodes are connected to it forming a hierarchy.
 It is also called hierarchical topology.
 It should at least have three levels to the hierarchy.
 Tree topology is ideal if workstations are located in groups.
 They are used in Wide Area Network.

Advantages of Tree Topology Disadvantages of Tree Topology

1. Extension of bus and star topologies. 1. Heavily cabled.
2. Expansion of nodes is possible and easy. 2. Costly.
3. Easily managed and maintained. 3. If more nodes are added maintenance is
4. Error detection is easily done. difficult.
4. Central hub fails, network fails.

STAR TOPOLOGY

 In a star topology, each device has a dedicated point-to-point link only to a

central controller, usually called a hub.
 The devices are not directly linked to one another.
 The controller acts as an exchange.
 If one device wants to send data to another, it sends the data to the controller,
which then relays the data to the other connected device.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit-1

Advantages of Star Topology Disadvantages of Star Topology

1. Fast performance with few nodes and 1. Cost of installation is high.
low network traffic. 2. Expensive to use.
2. Hub can be upgraded easily. 3. If the hub fails, then the whole
3. Easy to troubleshoot. network is stopped.
4. Easy to setup and modify. 4. Performance is based on the hub that
5. Only that node is affected which has is it depends on its capacity
failed, rest of the nodes can work
smoothly

MESH TOPOLOGY

 In a mesh topology, every device has a dedicated point-to-point link to every

other device.
 The term dedicated means that the link carries traffic only between the two
devices it connects.
 The number of physical links in a fully connected mesh network with n nodes is
given by n (n – 1) / 2.

Advantages of Mesh Topology Disadvantages of Mesh Topology

1. Each connection can carry its own data 1. Installation and configuration is
load. difficult.
2. It is robust. 2. Cabling cost is more.
3. Fault is diagnosed easily. 3. Bulk wiring is required.
4. Provides security and privacy.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit-1

HYBRID TOPOLOGY

 Hybrid Topology is a combination of one or more basic topologies.

 For example if one department in an office uses ring topology, the other
departments uses star and bus topology, then connecting these topologies will
result in Hybrid Topology.
 Hybrid Topology inherits the advantages and disadvantages of the topologies
included.

Advantages of Hybrid Topology Disadvantages of Hybrid Topology

1. Reliable as Error detecting and trouble 1. Complex in design.
shooting is easy. 2. Costly
2. Effective.
3. Scalable as size can be increased easily.
4. Flexible.

NETWORK TYPES
 A computer network is a group of computers linked to each other that enables the
computer to communicate with another computer and share their resources, data,
and applications.
 A computer network can be categorized by their size.
 A computer network is mainly of three types:
1. Local Area Network (LAN)
2. Wide Area Network (WAN)
3. Metropolitan Area Network (MAN)

LOCAL AREA NETWORK (LAN)

o Local Area Network is a group of computers connected to each other in a small
area such as building, office.
o LAN is used for connecting two or more personal computers through a
communication medium such as twisted pair, coaxial cable, etc.

10

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit-1

o It is less costly as it is built with inexpensive hardware such as hubs, network

adapters, and ethernet cables.
o The data is transferred at an extremely faster rate in Local Area Network.
o LAN can be connected using a common cable or a Switch.

Advantages of LAN Disadvantages of LAN

 Resource Sharing  High Setup Cost
 Software Applications Sharing.  Privacy Violations
 Easy and Cheap Communication  Data Security Threat
 Centralized Data.  LAN Maintenance Job
 Data Security  Covers Limited Area
 Internet Sharing

WIDE AREA NETWORK (WAN)

o A Wide Area Network is a network that extends over a large geographical area
such as states or countries.
o A Wide Area Network is quite bigger network than the LAN.

11

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit-1

o A Wide Area Network is not limited to a single location, but it spans over a large
geographical area through a telephone line, fibre optic cable or satellite links.
o The internet is one of the biggest WAN in the world.
o A Wide Area Network is widely used in the field of Business, government, and
education.
o WAN can be either a point-to-point WAN or Switched WAN.

Point-to-point WAN Switched WAN

Advantages of Wide Area Network: Disadvantages of Wide Area Network:

o Large Geographical area o Security issue
o Centralized data o Needs Firewall & antivirus software
o Exchange messages o High Setup cost
o Sharing of software and resources o Troubleshooting problems
o High bandwidth

METROPOLITAN AREA NETWORK (MAN)

o A metropolitan area network is a network that covers a larger geographic area by

interconnecting a different LAN to form a larger network.
o It generally covers towns and cities (50 km)
o In MAN, various LANs are connected to each other through a telephone
exchange line.
o Communication medium used for MAN are optical fibers, cables etc.
o It has a higher range than Local Area Network(LAN).It is adequate for distributed
computing applications.

12

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit-1

INTERNETWORK

o An internetwork is defined as two or more computer network LANs or WAN.

o An Internetwork can be formed by joining two or more individual networks by
means of various devices such as routers, gateways and bridges.
o An interconnection between public, private, commercial, industrial, or
government computer networks can also be defined as internetworking.

Types of Internetwork
Extranet Intranet
An extranet is used for information
An intranet belongs to an organization
sharing. The access to the extranet is
which is only accessible by
restricted to only those users who have
the organization's employee or members.
login credentials. An extranet is the lowest
The main aim of the intranet is to share the
level of internetworking. It can be
information and resources among the
categorized as MAN, WAN or other
organization employees. An intranet
computer networks. An extranet cannot
provides the facility to work in groups and
have a single LAN, atleast it must have
for teleconferences.
one connection to the external network.

PROTOCOL LAYERING
 In networking, a protocol defines the rules that both the sender and receiver and
all intermediate devices need to follow to be able to communicate effectively.
 A protocol provides a communication service that the process use to exchange
messages.
 When communication is simple, we may need only one simple protocol.
 When the communication is complex, we may need to divide the task between
different layers, in which case we need a protocol at each layer, or protocol
layering.
 Protocol layering is that it allows us to separate the services from the
implementation.
 A layer needs to be able to receive a set of services from the lower layer and to
give the services to the upper layer.
 Any modification in one layer will not affect the other layers.
13

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit-1

Basic Elements of Layered Architecture

 Service: It is a set of actions that a layer provides to the higher layer.
 Protocol: It defines a set of rules that a layer uses to exchange the information
with peer entity. These rules mainly concern about both the contents and order of
the messages used.
 Interface: It is a way through which the message is transferred from one layer to
another layer.

Features of Protocol Layering

1. It decomposes the problem of building a network into more manageable
components.
2. It provides a more modular design.

Principles of Protocol Layering

1. The first principle dictates that if we want bidirectional communication, we need
to make each layer so that it is able to perform two opposite tasks, one in each
direction.
2. The second principle that we need to follow in protocol layering is that the two
objects under each layer at both sites should be identical.

Protocol Graph
 The set of protocols that make up a network system is called a protocol graph.
 The nodes of the graph correspond to protocols, and the edges represent a
dependence relation.
 For example, the Figure below illustrates a protocol graph consists of protocols
RRP (Request/Reply Protocol) and MSP (Message Stream Protocol) implement
two different types of process-to-process channels, and both depend on the HHP
(Host-to- Host Protocol) which provides a host-to-host connectivity service

14

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit-1

OSI MODEL
o OSI stands for Open System Interconnection.
o It is a reference model that describes how information from a software application
in one computer moves through a physical medium to the software application in
another computer.
o OSI consists of seven layers, and each layer performs a particular network
function.
o OSI model was developed by the International Organization for Standardization
(ISO) in 1984, and it is now considered as an architectural model for the inter-
computer communications.
o OSI model divides the whole task into seven smaller and manageable tasks. Each
layer is assigned a particular task.
o Each layer is self-contained, so that task assigned to each layer can be performed
independently.

ORGANIZATION OF THE OSI LAYERS

15

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit-1

FUNCTIONS OF THE OSI LAYERS

1. PHYSICAL LAYER

The physical layer coordinates the functions required to transmit a bit stream over a
physical medium.
The physical layer is concerned with the following functions:
 Physical characteristics of interfaces and media - The physical layer defines
the characteristics of the interface between the devices and the transmission
medium.
 Representation of bits - To transmit the stream of bits, it must be encoded to
signals. The physical layer defines the type of encoding.
 Signals: It determines the type of the signal used for transmitting the information.
 Data Rate or Transmission rate - The number of bits sent each second –is also
defined by the physical layer.
 Synchronization of bits - The sender and receiver must be synchronized at the
bit level. Their clocks must be synchronized.
 Line Configuration - In a point-to-point configuration, two devices are
connected together through a dedicated link. In a multipoint configuration, a link
is shared between several devices.
 Physical Topology - The physical topology defines how devices are connected to
make a network. Devices can be connected using a mesh, bus, star or ring
topology.
16

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit-1

 Transmission Mode - The physical layer also defines the direction of

transmission between two devices: simplex, half-duplex or full-duplex.

2. DATA LINK LAYER

It is responsible for transmitting frames from one node to the next node.
The other responsibilities of this layer are
 Framing - Divides the stream of bits received into data units called frames.
 Physical addressing – If frames are to be distributed to different systems on the
network , data link layer adds a header to the frame to define the sender and
receiver.
 Flow control- If the rate at which the data are absorbed by the receiver is less
than the rate produced in the sender ,the Data link layer imposes a flow ctrl
mechanism.
 Error control- Used for detecting and retransmitting damaged or lost frames and
to prevent duplication of frames. This is achieved through a trailer added at the
end of the frame.
 Medium Access control -Used to determine which device has control over the
link at any given time.

3. NETWORK LAYER

This layer is responsible for the delivery of packets from source to destination.
It determines the best path to move data from source to the destination based on the
network conditions, the priority of service, and other factors.
The other responsibilities of this layer are
 Logical addressing - If a packet passes the network boundary, we need another
addressing system for source and destination called logical address. This
addressing is used to identify the device on the internet.
 Routing – Routing is the major component of the network layer, and it
determines the best optimal path out of the multiple paths from source to the
destination.

4. TRANSPORT LAYER

It is responsible for Process to Process delivery. That is responsible for source-to-

destination (end-to-end) delivery of the entire message, It also ensures whether the
message arrives in order or not.
The other responsibilities of this layer are
 Port addressing / Service Point addressing - The header includes an address
called port address / service point address. This layer gets the entire message to
the correct process on that computer.
 Segmentation and reassembly - The message is divided into segments and each
segment is assigned a sequence number. These numbers are arranged correctly on
the arrival side by this layer.
17

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit-1

 Connection control - This can either be connectionless or connection oriented.

 The connectionless treats each segment as an individual packet and
delivers to the destination.
 The connection-oriented makes connection on the destination side before
the delivery. After the delivery the termination will be terminated.
 Flow control - The transport layer also responsible for flow control but it is
performed end-to-end rather than across a single link.
 Error Control - Error control is performed end-to-end rather than across the
single link..

5. SESSION LAYER

This layer establishes, manages and terminates connections between applications.

The other responsibilities of this layer are
 Dialog control - Session layer acts as a dialog controller that creates a dialog
between two processes or we can say that it allows the communication between
two processes which can be either half-duplex or full-duplex.
 Synchronization- Session layer adds some checkpoints when transmitting the
data in a sequence. If some error occurs in the middle of the transmission of data,
then the transmission will take place again from the checkpoint. This process is
known as Synchronization and recovery.

6. PRESENTATION LAYER

It is concerned with the syntax and semantics of information exchanged between two
systems.
The other responsibilities of this layer are
 Translation – Different computers use different encoding system, this layer is
responsible for interoperability between these different encoding methods. It will
change the message into some common format.
 Encryption and decryption-It means that sender transforms the original
information to another form and sends the resulting message over the n/w. and
vice versa.
 Compression and expansion-Compression reduces the number of bits contained
in the information particularly in text, audio and video.

7. APPLICATION LAYER
This layer enables the user to access the network. It handles issues such as network
transparency, resource allocation, etc. This allows the user to log on to remote user.
The other responsibilities of this layer are
 FTAM (File Transfer, Access, Management) - Allows user to access files in a
remote host.
 Mail services - Provides email forwarding and storage.
 Directory services - Provides database sources to access information about
various sources and objects.

18

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit-1

TCP / IP PROTOCOL SUITE

 The TCP/IP architecture is also called as Internet architecture.
 It is developed by the US Defense Advanced Research Project Agency (DARPA)
for its packet switched network (ARPANET).
 TCP/IP is a protocol suite used in the Internet today.
 It is a 4-layer model. The layers of TCP/IP are
1. Application layer
2. Transport Layer (TCP/UDP)
3. Internet Layer
4. Network Interface Layer

APPLICATION LAYER
 An application layer incorporates the function of top three OSI layers. An
application layer is the topmost layer in the TCP/IP model.
 It is responsible for handling high-level protocols, issues of representation.
 This layer allows the user to interact with the application.
 When one application layer protocol wants to communicate with another
application layer, it forwards its data to the transport layer.
 Protocols such as FTP, HTTP, SMTP, POP3, etc running in the application layer
provides service to other program running on top of application layer

19

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit-1

TRANSPORT LAYER
 The transport layer is responsible for the reliability, flow control, and correction
of data which is being sent over the network.
 The two protocols used in the transport layer are User Datagram protocol and
Transmission control protocol.
o UDP – UDP provides connectionless service and end-to-end delivery of
transmission. It is an unreliable protocol as it discovers the errors but not
specify the error.
o TCP – TCP provides a full transport layer services to applications. TCP is
a reliable protocol as it detects the error and retransmits the damaged
frames.

INTERNET LAYER
 The internet layer is the second layer of the TCP/IP model.
 An internet layer is also known as the network layer.
 The main responsibility of the internet layer is to send the packets from any
network, and they arrive at the destination irrespective of the route they take.
 Internet layer handle the transfer of information across multiple networks through
router and gateway .
 IP protocol is used in this layer, and it is the most significant part of the entire
TCP/IP suite.

NETWORK INTERFACE LAYER

 The network interface layer is the lowest layer of the TCP/IP model.
 This layer is the combination of the Physical layer and Data Link layer defined in

the OSI reference model.

 It defines how the data should be sent physically through the network.
 This layer is mainly responsible for the transmission of the data between two
devices on the same network.
 The functions carried out by this layer are encapsulating the IP datagram into
frames transmitted by the network and mapping of IP addresses into physical
addresses.
 The protocols used by this layer are Ethernet, token ring, FDDI, X.25, frame
relay.

20

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit-1

COMPARISON - OSI MODEL AND TCP/IP MODEL

S.No OSI MODEL TCP/IP MODEL

1 Defined before advent of internet Defined after the advent of Internet.
2 Service interface and protocols Service interface and protocols were not
are clearly distinguished before clearly distinguished before

3 Internetworking not supported TCP/IP supports Internet working

4 Strict layering Loosely layered

5 Protocol independent standard Protocol Dependant standard

6 Less Credible More Credible

7 All packets are reliably delivered TCP reliably delivers packets, IP does
not reliably deliver packets

HTTP (HYPERTEXT TRANSFER PROTOCOL)

 The HyperText Transfer Protocol (HTTP) is used to define how the client-
server programs can be written to retrieve web pages from the Web.
 It is a protocol used to access the data on the World Wide Web (WWW).
 The HTTP protocol can be used to transfer the data in the form of plain text,
hypertext, audio, video, and so on.
 HTTP is a stateless request/response protocol that governs client/server
communication.
 An HTTP client sends a request; an HTTP server returns a response.
 The server uses the port number 80; the client uses a temporary port number.
 HTTP uses the services of TCP , a connection-oriented and reliable protocol.
 HTTP is a text-oriented protocol. It 21contains embedded URL known as links.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit-1

 When hypertext is clicked, browser opens a new connection, retrieves file from
the server and displays the file.
 Each HTTP message has the general form
START_LINE <CRLF>
MESSAGE_HEADER <CRLF>
<CRLF> MESSAGE_BODY <CRLF>
where <CRLF> stands for carriage-return-line-feed.

Features of HTTP
o Connectionless protocol:
HTTP is a connectionless protocol. HTTP client initiates a request and
waits for a response from the server. When the server receives the
request, the server processes the request and sends back the response to
the HTTP client after which the client disconnects the connection. The
connection between client and server exist only during the current
request and response time only.

o Media independent:
HTTP protocol is a media independent as data can be sent as long as
both the client and server know how to handle the data content. It is
required for both the client and server to specify the content type in
MIME-type header.

o Stateless:
HTTP is a stateless protocol as both the client and server know each
other only during the current request. Due to this nature of the protocol,
both the client and server do not retain the information between various
requests of the web pages.

HTTP REQUEST AND RESPONSE MESSAGES

 The HTTP protocol defines the format of the request and response messages.

 Request Message: The request message is sent by the client that consists of a
request line, headers, and sometimes a body.
 Response Message: The response message is sent by the server to the client
that consists of a status line, headers, and sometimes a body.

822

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit-1

HTTP REQUEST MESSAGE

 The first line in a request message is called a request line.

 After the request line, we can have zero or more request header lines.
 The body is an optional one. It contains the comment to be sent or the file to be
published on the website when the method is PUT or POST.

Request Line
 There are three fields in this request line - Method, URL and Version.
 The Method field defines the request types.
 The URL field defines the address and name of the corresponding web page.
 The Version field gives the version of the protocol; the most current version of
HTTP is 1.1.
 Some of the Method types are

Request Header
 Each request header line sends additional information from the client to the
server.
 Each header line has a header name, a colon, a space, and a header value.
 The value field defines the values associated with each header name.
 Headers defined for request message include

23

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit-1

Body
 The body can be present in a request message. It is optional.
 Usually, it contains the comment to be sent or the file to be published on the
website when the method is PUT or POST.

Conditional Request
 A client can add a condition in its request.
 In this case, the server will send the requested web page if the condition is met
or inform the client otherwise.
 One of the most common conditions imposed by the client is the time and date
the web page is modified.
 The client can send the header line If-Modified-Since with the request to tell the
server that it needs the page only if it is modified after a certain point in time.

HTTP RESPONSE MESSAGE

 The first line in a request message is called a status line.

 After the request line, we can have zero or more response header lines.
 The body is an optional one. The body is present unless the response is an error
message

Status Line
 The Status line contains three fields - HTTP version , Status code, Status
phrase
 The first field defines the version of HTTP protocol, currently 1.1.
 The status code field defines the status of the request. It classifies the HTTP
result. It consists of three digits.
1xx–Informational, 2xx– Success, 3xx–Redirection,
4xx–Client error, 5xx–Server error
 The Status phrase field gives brief description about status code in text form.
 Some of the Status codes are

24

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit-1

Response Header
 Each header provides additional information to the client.
 Each header line has a header name, a colon, a space, and a header value.
 Some of the response headers are:

Body
 The body contains the document to be sent from the server to the client.
 The body is present unless the response is an error message.

HTTP CONNECTIONS
 HTTP Clients and Servers exchange multiple messages over the same TCP
connection.
 If some of the objects are located on the same server, we have two choices: to
retrieve each object using a new TCP connection or to make a TCP connection
and retrieve them all.
 The first method is referred to as a non-persistent connection, the second as a
persistent connection.
 HTTP 1.0 uses non-persistent connections and HTTP 1.1 uses persistent
connections .

NON-PERSISTENT CONNECTIONS

 In a non-persistent connection, one TCP

connection is made for each
request/response.
 Only one object can be sent over a single
TCP connection
 The client opens a TCP connection and
sends a request.
 The server sends the response and closes
the connection.
 The client reads the data until it
encounters an end-of-file marker.
 It then closes the connection.

25

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit-1

PERSISTENT CONNECTIONS

 HTTP version 1.1 specifies a persistent connection

by default.
 Multiple objects can be sent over a single TCP
connection.
 In a persistent connection, the server leaves the
connection open for more requests after sending a
response.
 The server can close the connection at the request of
a client or if a time-out has been reached.
 Time and resources are saved using persistent
connections. Only one set of buffers and variables
needs to be set for the connection at each site.
 The round trip time for connection establishment
and connection termination is saved.

HTTP COOKIES
 An HTTP cookie (also called web cookie, Internet cookie, browser cookie,
or simply cookie) is a small piece of data sent from a website and stored on the
user's computer by the user's web browser while the user is browsing.
 HTTP is stateless , Cookies are used to add State.
 Cookies were designed to be a reliable mechanism for websites to
remember stateful information (such as items added in the shopping cart in an
online store) or to record the user's browsing activity (including clicking
particular buttons, logging in, or recording which pages were visited in the
past).
 They can also be used to remember arbitrary pieces of information that the user
previously entered into form fields such as names, addresses, passwords, and
credit card numbers.

Components of Cookie
A cookie consists of the following components:
1. Name
2. Value
3. Zero or more attributes (name/value pairs). Attributes store information such as
the cookie's expiration, domain, and flags

26

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit-1

Creating and Storing Cookies

The creation and storing of cookies depend on the implementation; however, the
principle is the same.
1. When a server receives a request from a client, it stores information
about the client in a file or a string. The information may include the
domain name of the client, the contents of the cookie (information the
server has gathered about the client such as name, registration number,
and so on), a timestamp, and other information depending on the
implementation.
2. The server includes the cookie in the response that it sends to the client.
3. When the client receives the response, the browser stores the cookie in
the cookie directory, which is sorted by the server domain name.

Using Cookies
 When a client sends a request to a server, the browser looks in the cookie
directory to see if it can find a cookie sent by that server.
 If found, the cookie is included in the request.
 When the server receives the request, it knows that this is an old client, not a
new one.
 The contents of the cookie are never read by the browser or disclosed to the
user. It is a cookie made by the server and eaten by the server.

Types of Cookies
1. Authentication cookies
These are the most common method used by web servers to know whether the user is
logged in or not, and which account they are logged in with. Without such a mechanism,
the site would not know whether to send a page containing sensitive information, or
require the user to authenticate themselves by logging in.
2. Tracking cookies
These are commonly used as ways to compile individuals browsing histories.
3. Session cookie
A session cookie exists only in temporary memory while the user navigates the website.
Web browsers normally delete session cookies when the user closes the browser.
4. Persistent cookie
Instead of expiring when the web browser is closed as session cookies do, a
persistent cookie expires at a specific date or after a specific length of time. This means
that, for the cookie's entire lifespan , its information will be transmitted to the server
every time the user visits the website that it belongs to, or every time the user views a
resource belonging to that website from another website.

27

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit-1

HTTP CACHING
 HTTP Caching enables the client to retrieve document faster and reduces load
on the server.
 HTTP Caching is implemented at Proxy server, ISP router and Browser.
 Server sets expiration date (Expires header) for each page, beyond which it is
not cached.
 HTTP Cache document is returned to client only if it is an updated copy by
checking against If-Modified-Since header.
 If cache document is out-of-date, then request is forwarded to the server and
response is cached along the way.
 A web page will not be cached if no-cache directive is specified.

HTTP SECURITY
 HTTP does not provide security.
 However HTTP can be run over the Secure Socket Layer (SSL).
 In this case, HTTP is referred to as HTTPS.
 HTTPS provides confidentiality, client and server authentication, and data
integrity.

FTP (FILE TRANSFER PROTOCOL)

 FTP stands for File transfer protocol.
 FTP is a standard internet protocol provided by TCP/IP used for
transmitting the files from one host to another.
 It is mainly used for transferring the web page files from their creator to the
computer that acts as a server for other computers on the internet.
 It is also used for downloading the files to computer from other servers.
 Although we can transfer files using HTTP, FTP is a better choice to
transfer large files or to transfer files using different formats.

FTP OBJECTIVES
 It provides the sharing of files.
 It is used to encourage the use of remote computers.
 It transfers the data more reliably and efficiently.

FTP MECHANISM

28

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit-1

 The above figure shows the basic model of the FTP.

 The FTP client has three components:
o user interface, control process, and data transfer process.
 The server has two components:
o server control process and server data transfer process.

FTP CONNECTIONS
 There are two types of connections in FTP -
Control Connection and Data Connection.
 The two connections in FTP have different lifetimes.
 The control connection remains connected during the entire interactive FTP
session.
 The data connection is opened and then closed for each file transfer activity.
When a user starts an FTP session, the control connection opens.
 While the control connection is open, the data connection can be opened and
closed multiple times if several files are transferred.
 FTP uses two well-known TCP ports:
o Port 21 is used for the control connection
o Port 20 is used for the data connection.

 Control Connection:
o The control connection uses very simple rules for communication.
o Through control connection, we can transfer a line of command or line
of response at a time.
o The control connection is made between the control processes.
o The control connection remains connected during the entire interactive
FTP session.

 Data Connection:
o The Data Connection uses very complex rules as data types may vary.
o The data connection is made between data transfer processes.
o The data connection opens when a command comes for transferring the
files and closes when the file is transferred.

29

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit-1

FTP COMMUNICATION
 FTP Communication is achieved through commands and responses.
 FTP Commands are sent from the client to the server
 FTP responses are sent from the server to the client.
 FTP Commands are in the form of ASCII uppercase, which may or may not be
followed by an argument.
 Some of the most common commands are

 Every FTP command generates at least one response.

 A response has two parts: a three-digit number followed by text.
 The numeric part defines the code; the text part defines needed parameter.

FTP FILE TYPE

 FTP can transfer one of the following file types across the data connection:
ASCII file, EBCDIC file, or image file.

30

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit-1

FTP DATA STRUCTURE

 FTP can transfer a file across the data connection using one of the following
data structure : file structure, record structure, or page structure.
 The file structure format is the default one and has no structure. It is a
continuous stream of bytes.
 In the record structure, the file is divided into records. This can be used only
with text files.
 In the page structure, the file is divided into pages, with each page having a
page number and a page header. The pages can be stored and accessed
randomly or sequentially.

FTP TRANSMISSION MODE

 FTP can transfer a file across the data connection using one of the following
three transmission modes: stream mode, block mode, or compressed mode.
 The stream mode is the default mode; data are delivered from FTP to TCP as a
continuous stream of bytes.
 In the block mode, data can be delivered from FTP to TCP in blocks.
 In the compressed mode, data can be compressed and delivered from FTP to
TCP.

FTP FILE TRANSFER

 File transfer occurs over the data connection under the control of the
commands sent over the control connection.
 File transfer in FTP means one of three things:
o retrieving a file (server to client)
o storing a file (client to server)
o directory listing (server to client).

FTP SECURITY
 FTP requires a password, the password is sent in plaintext which is
unencrypted. This means it can be intercepted and used by an attacker.
 The data transfer connection also transfers data in plaintext, which is insecure.
 To be secure, one can add a Secure Socket Layer between the FTP application
layer and the TCP layer.
 In this case FTP is called SSL-FTP.

EMAIL (SMTP, MIME, IMAP, POP)

 One of the most popular Internet services is electronic mail (E-mail).
 Email is one of the oldest network applications.
 The three main components of an Email are
1. User Agent (UA)
2. Messsage Transfer Agent (MTA) – SMTP
3. Messsage Access Agent (MAA) - IMAP , POP

31

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit-1

 When the sender and the receiver of an e-mail are on the same system, we need
only two User Agents and no Message Transfer Agent
 When the sender and the receiver of an e-mail are on different system, we need
two UA, two pairs of MTA (client and server), and two MAA (client and
server).

WORKING OF EMAIL

 When Alice needs to send a message to Bob, she runs a UA program to

prepare the message and send it to her mail server.
 The mail server at her site uses a queue (spool) to store messages waiting to be
sent. The message, however, needs to be sent through the Internet from Alice’s
site to Bob’s site using an MTA.
 Here two message transfer agents are needed: one client and one server.
 The server needs to run all the time because it does not know when a client will
ask for a connection.
 The client can be triggered by the system when there is a message in the queue
to be sent.
 The user agent at the Bob site allows Bob to read the received message.
 Bob later uses an MAA client to retrieve the message from an MAA server
running on the second server.

32

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit-1

USER AGENT (UA)

 The first component of an electronic mail system is the user agent (UA).
 It provides service to the user to make the process of sending and receiving a
message easier.
 A user agent is a software package that composes, reads, replies to, and
forwards messages. It also handles local mailboxes on the user computers.

 There are two types of user agents: Command-driven and GUI-based.

Command driven
o Command driven user agents belong to the early days of electronic mail.
o A command-driven user agent normally accepts a one character command from
the keyboard to perform its task.
o Some examples of command driven user agents are mail, pine, and elm.

GUI-based
o Modern user agents are GUI-based.
o They allow the user to interact with the software by using both the keyboard
and the mouse.
o They have graphical components such as icons, menu bars, and windows that
make the services easy to access.
o Some examples of GUI-based user agents are Eudora and Outlook.

MESSAGE TRANSFER AGENT (MTA)

 The actual mail transfer is done through message transfer agents (MTA).
 To send mail, a system must have the client MTA, and to receive mail, a
system must have a server MTA.
 The formal protocol that defines the MTA client and server in the Internet is
called Simple Mail Transfer Protocol (SMTP).

MESSAGE ACCESS AGENT (MAA)

 MAA is a software that pulls messages out of a mailbox.
 POP3 and IMAP4 are examples of MAA.

33

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit-1

ADDRESS FORMAT OF EMAIL

 E-mail address is userid @ domain where domain is hostname of the mail
server.

MESSAGE FORMAT OF EMAIL

 Email message consists of two parts namely header and body.
 Each header line contains type and value separated by a colon (:).
 Some header contents are:
o From: identifier sender of the message.
o To: mail address of the recipient(s).
o Subject: says about purpose of the message.
o Date: timestamp of when the message was transmitted.
 Header is separated from the body by a blank line.
 Body contains the actual message.

 Email was extended in 1993 to carry many different types of data: audio,
video, images, Word documents, and so on.
 This extended version is known as MIME(Multipurpose Mail Extension).

SIMPLE MAIL TRANSFER PROTOCOL (SMTP)

 SMTP is the standard protocol for transferring mail between hosts in the
TCP/IP protocol suite.
 SMTP is not concerned with the format or content of messages themselves.
 SMTP uses information written on the envelope of the mail (message header),
but does not look at the contents (message body) of the envelope.

34

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit-1

 SMTP clients and servers have two main components

o User Agents(UA) – Prepares the message, encloses it in an envelope.
o Mail Transfer Agent (MTA) – Transfers the mail across the internet

 SMTP also allows the use of Relays allowing other MTAs to relay the mail.

35

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit-1

SMTP MAIL FLOW

 To begin, mail is created by a user-agent program in response to user input.

 Each created message consists of a header that includes the recipient's email
address and other information, and a message body containing the message to
be sent.
 These messages are then queued in some fashion and provided as input to an
SMTP Sender program.

SMTP COMMANDS AND RESPONSES

 The operation of SMTP consists of a series of commands and responses
exchanged between the SMTP sender and SMTP receiver.
 The initiative is with the SMTP sender, who establishes the TCP connection.
 Once the connection is established, the SMTP sender sends commands over the
connection to the receiver.
 The command is from an MTA client to an MTA server; the response is from
an MTA server to the MTA client.

SMTP Commands
 Commands are sent from the client to the server. It consists of a keyword
followed by zero or more arguments. SMTP defines 14 commands.

36

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit-1

SMTP Responses
 Responses are sent from the server to the client.
 A response is a three digit code that may be followed by additional textual
information.

37

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit-1

SMTP OPERATIONS
Basic SMTP operation occurs in three phases:
1. Connection Setup
2. Mail Transfer
3. Connection Termination

Connection Setup
 An SMTP sender will attempt to set up a TCP connection with a target host
when it has one or more mail messages to deliver to that host.
 The sequence is quite simple:
1. The sender opens a TCP connection with the receiver.
2. Once the connection is established, the receiver identifies itself with
"Service Ready”.
3. The sender identifies itself with the HELO command.
4. The receiver accepts the sender's identification with "OK".
5. If the mail service on the destination is unavailable, the destination host
returns a "Service Not Available" reply in step 2, and the process is
terminated.

Mail Transfer
 Once a connection has been established, the SMTP sender may send one or
more messages to the SMTP receiver.
 There are three logical phases to the transfer of a message:
1. A MAIL command identifies the originator of the message.
2. One or more RCPT commands identify the recipients for this
message.
3. A DATA command transfers the message text.

38

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit-1

Connection Termination
 The SMTP sender closes the connection in two steps.
 First, the sender sends a QUIT command and waits for a reply.
 The second step is to initiate a TCP close operation for the TCP connection.
 The receiver initiates its TCP close after sending its reply to the QUIT
command.

LIMITATIONS OF SMTP
 SMTP cannot transmit executable files or other binary objects.
 SMTP cannot transmit text data that includes national language characters, as
these are represented by 8-bit codes with values of 128 decimal or higher, and
SMTP is limited to 7-bit ASCII.
 SMTP servers may reject mail message over a certain size.
 SMTP gateways that translate between ASCII and the character code EBCDIC
do not use a consistent set of mappings, resulting in translation problems.
 Some SMTP implementations do not adhere completely to the SMTP standards
defined.
 Common problems include the following:
1. Deletion, addition, or recording of carriage return and linefeed.
2. Truncating or wrapping lines longer than 76 characters.
3. Removal of trailing white space (tab and space characters).
4. Padding of lines in a message to the same length.
5. Conversion of tab characters into multiple-space characters.

MULTIPURPOSE INTERNET MAIL EXTENSION (MIME)

 SMTP provides a basic email service, while MIME adds multimedia capability to
SMTP.
 MIME is an extension to SMTP and is used to overcome the problems and limitations
of SMTP.
 Email system was designed to send messages only in ASCII format.
 Languages such as French, Chinese, etc., are not supported.
 Image, audio and video files cannot be sent.
 MIME adds the following features to email service:

39

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit-1

Be able to send multiple attachments with a single message;

Unlimited message length;
Use of character sets other than ASCII code;
Use of rich text (layouts, fonts, colors, etc)
Binary attachments (executables, images, audio or video files, etc.), which
may be divided if needed.
 MIME is a protocol that converts non-ASCII data to 7-bit NVT(Network
Virtual Terminal) ASCII and vice-versa.

MIME HEADERS
 Using headers, MIME describes the type of message content and the encoding
used.
 Headers defined in MIME are:
 MIME-Version- current version, i.e., 1.1
 Content-Type - message type (text/html, image/jpeg, application/pdf)
 Content-Transfer-Encoding - message encoding scheme (eg base64).
 Content-Id - unique identifier for the message.
 Content-Description - describes type of the message body.

40

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit-1

MIME CONTENT TYPES

 There are seven different major types of content and a total of 14 subtypes.
 In general, a content type declares the general type of data, and the subtype
specifies a particular format for that type of data.
 MIME also defines a multipart type that says how a message carrying more
than one data type is structured.
 This is like a programming language that defines both base types (e.g., integers
and floats) and compound types (e.g., structures and arrays).
 One possible multipart subtype is mixed, which says that the message contains
a set of independent data pieces in a specified order.
 Each piece then has its own header line that describes the type of that piece.
 The table below lists the MIME content types:

ENCODING FORMATS OF MIME

 MIME uses various encoding formats to convert binary data into the ASCII
character set.
 To transfer binary data, MIME offers five encoding formats which can be used
in the header transfer-encoding:
 7-bit : 7-bit text format (for messages without accented characters);
 8-bit : 8-bit text format;
 quoted-printable : Quoted-Printable format, recommended for messages
which use a 7-bit alphabet (such as when there are accent marks);
 base-64 : Base 64, for sending binary files as attachments;
 binary : binary format; not recommended.
 Since MIME is very open, it can use third-party encoding formats such as:
 BinHex : A proprietary format belonging to Apple
 Uuencode : for UNIX-to-UNIX encoding
 Xencode : for binary-to-text encoding

41

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit-1

MESSAGE TRANSFER IN MIME

 MTA is a mail daemon (sendmail) active on hosts having mailbox, used to send
an email.
 Mail passes through a sequence of gateways before it reaches the recipient mail
server.
 Each gateway stores and forwards the mail using Simple mail transfer protocol
(SMTP).
 SMTP defines communication between MTAs over TCP on port 25.
 In an SMTP session, sending MTA is client and receiver is server. In each
exchange:
 Client posts a command (HELO, MAIL, RCPT, DATA, QUIT, VRFY, etc.)
 Server responds with a code (250, 550, 354, 221, 251 etc) and an explanation.
 Client is identified using HELO command and verified by the server
 Client forwards message to server, if server is willing to accept.
 Message is terminated by a line with only single period (.) in it.
 Eventually client terminates the connection.

IMAP (INTERNET MAIL ACCESS PROTOCOL)

 IMAP is an Application Layer Internet protocol that allows an e-mail client to
access e-mail on a remote mail server.
 It is a method of accessing electronic mail messages that are kept on a possibly
shared mail server.
 IMAP is a more capable wire protocol.
 IMAP is similar to SMTP in many ways.
 IMAP is a client/server protocol running over TCP on port 143.
 IMAP allows multiple clients simultaneously connected to the same mailbox,
and through flags stored on the server, different clients accessing the same
mailbox at the same or different times can detect state changes made by other
clients.
 In other words, it permits a "client" email program to access remote message
stores as if they were local.
 For example, email stored on an IMAP server can be manipulated from a
desktop computer at home, a workstation at the office, and a notebook
computer while travelling, without the need to transfer messages or files back
and forth between these computers.
 IMAP can support email serving in three modes:

42

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit-1

 Offline
 Online
Users may connect to the server, look at what email is available,
and access it online. This looks to the user very much like having
local spool files, but they’re on the mail server.
 Disconnected operation
A mail client connects to the server, can make a “cache” copy of
selected messages, and disconnects from the server. The user can
then work on the messages offline, and connect to the server later
and resynchronize the server status with the cache.

OPERATION OF IMAP
 The mail transfer begins with the client authenticating the user and identifying
the mailbox they want to access.
 Client Commands
LOGIN, AUTHENTICATE, SELECT, EXAMINE, CLOSE, and LOGOUT
 Server Responses
OK, NO (no permission), BAD (incorrect command),
 When user wishes to FETCH a message, server responds in MIME format.
 Message attributes such as size are also exchanged.
 Flags are used by client to report user actions.
SEEN, ANSWERED, DELETED, RECENT

IMAP4
 The latest version is IMAP4. IMAP4 is more powerful and more complex.
 IMAP4 provides the following extra functions:
 A user can check the e-mail header prior to downloading.
 A user can search the contents of the e-mail for a specific string of
characters prior to downloading.

43

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit-1

 A user can partially download e-mail. This is especially useful if bandwidth

is limited and the e-mail contains multimedia with high bandwidth
requirements.
 A user can create, delete, or rename mailboxes on the mail server.
 A user can create a hierarchy of mailboxes in a folder for e-mail storage.

ADVANTAGES OF IMAP
 With IMAP, the primary storage is on the server, not on the local machine.
 Email being put away for storage can be foldered on local disk, or can be
foldered on the IMAP server.
 The protocol allows full user of remote folders, including a remote folder
hierarchy and multiple inboxes.
 It keeps track of explicit status of messages, and allows for user-defined status.

44

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit-1

 Supports new mail notification explicitly.

 Extensible for non-email data, like netnews, document storage, etc.
 Selective fetching of individual MIME body parts.
 Server-based search to minimize data transfer.
 Servers may have extensions that can be negotiated.

POST OFFICE PROTOCOL (POP3)

 Post Office Protocol (POP3) is an application-layer Internet standard protocol
used by local e-mail clients to retrieve e-mail from a remote server over a
TCP/IP connection.
 There are two versions of POP.
• The first, called POP2, became a standard in the mid-80's and requires
SMTP to send messages.
• The current version, POP3, can be used with or without SMTP. POP3
uses TCP/IP port 110.
 POP is a much simpler protocol, making implementation easier.
 POP supports offline access to the messages, thus requires less internet usage
time
 POP does not allow search facility.
 In order to access the messages, it is necessary to download them.
 It allows only one mailbox to be created on server.
 It is not suitable for accessing non mail data.
 POP mail moves the message from the email server onto the local computer,
although there is usually an option to leave the messages on the email server as
well.
 POP treats the mailbox as one store, and has no concept of folders.
 POP works in two modes namely, delete and keep mode.
 In delete mode, mail is deleted from the mailbox after retrieval. The delete
mode is normally used when the user is working at their permanent
computer and can save and organize the received mail after reading or
replying.
 In keep mode, mail after reading is kept in mailbox for later retrieval. The
keep mode is normally used when the user accesses her mail away from
their primary computer .

45

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit-1

 POP3 client is installed on the recipient computer and POP server on the mail
server.
 Client opens a connection to the server using TCP on port 110.
 Client sends username and password to access mailbox and to retrieve
messages.

POP3 Commands
POP commands are generally abbreviated into codes of three or four letters
The following describes some of the POP commands:
1. UID - This command opens the connection
2. STAT - It is used to display number of messages currently in the mailbox
3. LIST - It is used to get the summary of messages
4. RETR -This command helps to select a mailbox to access the messages
5. DELE - It is used to delete a message
6. RSET - It is used to reset the session to its initial state
7. QUIT - It is used to log off the session

DIFFERENCE BETWEEN POP AND IMAP

SNo. POP IMAP

1 Generally used to support single Designed to handle multiple clients.

client.
2 Messages are accessed offline. Messages are accessed online
although it also supports offline mode.
3 POP does not allow search facility. IMAP offers ability to search emails.
4 All the messages have to be It allows selective transfer of messages to
downloaded. the client.
5 Only one mailbox can be created on Multiple mailboxes can be created on the
the server. server.
6 Not suitable for accessing non-mail Suitable for accessing non-mail data i.e.
data. attachment.

46

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit-1

POP commands are generally IMAP commands are not abbreviated,

7 abbreviated into codes of three or four they are full. Eg. STATUS.
letters. Eg. STAT.
8 It requires minimum use of server Clients are totally dependent on server.
resources.
9 Mails once downloaded cannot be Allows mails to be accessed from
accessed from some other location. multiple locations.
10 The e-mails are not downloaded Users can view the headings and sender
automatically. of e-mails and then decide to download.
11 POP requires less internet usage time. IMAP requires more internet usage time.

Advantages of IMAP over POP

 IMAP is more powerful and more complex than POP.
 User can check the e-mail header prior to downloading.
 User can search e-mail for a specific string of characters prior to downloading.
 User can download partially, very useful in case of limited bandwidth.
 User can create, delete, or rename mailboxes on the mail server.

DNS (DOMAIN NAME SYSTEM)

 Domain Name System was designed in 1984.

 DNS is used for name-to-address mapping.
 The DNS provides the protocol which allows clients and servers to
communicate with each other.
 Eg: Host name like www.yahoo.com is translated into numerical IP addresses
like 207.174.77.131
 Domain Name System (DNS) is a distributed database used by TCP/IP
applications to map between hostnames and IP addresses and to provide
electronic mail routing information.
 Each site maintains its own database of information and runs a server program
that other systems across the Internet can query.

WORKING OF DNS

47

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit-1

The following six steps shows the working of a DNS. It maps the host name to an IP
address:
1. The user passes the host name to the file transfer client.
2. The file transfer client passes the host name to the DNS client.
3. Each computer, after being booted, knows the address of one DNS server. The
DNS client sends a message to a DNS server with a query that gives the file
transfer server name using the known IP address of the DNS server.
4. The DNS server responds with the IP address of the desired file transfer server.
5. The DNS server passes the IP address to the file transfer client.
6. The file transfer client now uses the received IP address to access the file
transfer server.

NAME SPACE
 To be unambiguous, the names assigned to machines must be carefully selected
from a name space with complete control over the binding between the names
and IP address.

48

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit-1

 The names must be unique because the addresses are unique.

 A name space that maps each address to a unique name can be organized in
two ways: flat (or) hierarchical.

Flat Name Space

 In a flat name space, a name is assigned to an address.
 A name in this space is a sequence of characters without structure.
 The main disadvantage of a flat name space is that it cannot be used in a
large system such as Internet because it must be centrally controlled to
avoid ambiguity and duplication.

Hierarchical Name Space

 In a hierarchical name space, each name is made of several parts.
 The first part can define the organization, the second part can define the name,
the third part can define departments, and so on.
 In this case, the authority to assign and control the name spaces can be
decentralized.
 A central authority can assign the part of the name that defines the nature of the
organization and the name.
 The responsibility for the rest of the name can be given to the organization
itself. Suffixes can be added to the name to define host or resources.
 The management of the organization need not worry that the prefix chosen for
a host is taken by another organization because even if part of an address is the
same, the whole address is different.
 The names are unique without the need to be assigned by a central authority.
 The central authority controls only part of the name, not the whole name.

DOMAIN NAME SPACE

 To have a hierarchical name space, a domain name space was designed. In this
design, the names are defined in an inverted-tree structure with the root at the
top.
 Each node in the tree has a label, which is a string with a maximum of 63
characters.
 The root label is a null string.
 DNS requires that children of a node have different labels, which guarantees
the uniqueness of the domain names.

49

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit-1

 Each node in the tree has a label, which is a string with a maximum of 63
characters.
 The root label is a null string (empty string). DNS requires that children of a
node (nodes that branch from the same node) have different labels, which
guarantees the uniqueness of the domain names.

Domain Name
 Each node in the tree has a label called as domain name.
 A full domain name is a sequence of labels separated by dots (.)
 The domain names are always read from the node up to the root.
 The last label is the label of the root (null).
 This means that a full domain name always ends in a null label, which
means the last character is a dot because the null string is nothing.
 If a label is terminated by a null string, it is called a fully qualified domain
name (FQDN).
 If a label is not terminated by a null string, it is called a partially qualified
domain name (PQDN).

50

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit-1

Domain
 A domain is a subtree of the domain name space.
 The name of the domain is the domain name of the node at the top of the sub-
tree.
 A domain may itself be divided into domains.

DISTRIBUTION OF NAME SPACE

 The information contained in the domain name space must be stored.
 But it is very inefficient and also not reliable to have just one computer store
such a huge amount of information.
 It is inefficient because responding to requests from all over the world, places a
heavy load on the system.
 It is not reliable because any failure makes the data inaccessible.
 The solution to these problems is to distribute the information among many
computers called DNS servers.

HIERARCHY OF NAME SERVERS

 The way to distribute information among DNS servers is to divide the whole
space into many domains based on the first level.
 Let the root stand-alone and create as many domains as there are first level
nodes.
 Because a domain created this way could be very large,
 DNS allows domains to be divided further into smaller domains.
 Thus we have a hierarchy of servers in the same way that we have a hierarchy
of names.

51

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit-1

ZONE
 What a server is responsible for, or has authority over, is called a zone.
 The server makes a database called a zone file and keeps all the information for
every node under that domain.
 If a server accepts responsibility for a domain and does not divide the domains
into smaller domains, the domain and zone refer to the same thing.
 But if a server divides its domain into sub domains and delegates parts of its
authority to other servers, domain and zone refer to different things.
 The information about the nodes in the sub domains is stored in the servers at
the lower levels, with the original server keeping some sort of references to
these lower level servers.
 But still, the original server does not free itself from responsibility totally.
 It still has a zone, but the detailed information is kept by the lower level
servers.

ROOT SERVER
 A root sever is a server whose zone consists of the whole tree.
 A root server usually does not store any information about domains but
delegates its authority to other servers, keeping references to those servers.
 Currently there are more than 13 root servers, each covering the whole domain
name space.
 The servers are distributed all around the world.

PRIMARY AND SECONDARY SERVERS

 DNS defines two types of servers: primary and secondary.
 A Primary Server is a server that stores a file about the zone for which it is an
authority.
 Primary Servers are responsible for creating, maintaining, and updating
the zone file.
 Primary Server stores the zone file on a local disc.
 A secondary server is a server that transfers the complete information about a
zone from another server (Primary or Secondary) and stores the file on its local
disc.
 If updating is required, it must be done by the primary server, which sends the
updated version to the secondary.

52

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit-1

 A primary server loads all information from the disk file; the secondary server
loads all information from the primary server.

DNS IN THE INTERNET

 DNS is a protocol that can be used in different platforms.
 In the Internet, the domain name space (tree) is divided into three different
sections - Generic domains, Country domains, and Inverse domain.

Generic Domains
 The generic domains define registered hosts according to their generic
behavior.
 Each node in the tree defines a domain, which is an index to the domain name
space database.
 The first level in the generic domains section allows seven possible three
character levels.
 These levels describe the organization types as listed in following table.

Country Domains
 The country domains section follows the same format as the generic domains
but uses two characters for country abbreviations
 E.g.; in for India, us for United States etc) in place of the three character
organizational abbreviation at the first level.
 Second level labels can be organizational, or they can be more specific,
national designation.
 India for example, uses state abbreviations as a subdivision of the country
domain us. (e.g., ca.in.)

Inverse Domains
 Mapping an address to a name is called Inverse domain.

53

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit-1

 The client can send an IP address to a server to be mapped to a domain name

and it is called PTR(Pointer) query.
 To answer queries of this kind, DNS uses the inverse domain

DNS RESOLUTION
 Mapping a name to an address or an address to a name is called name address
resolution.
 DNS is designed as a client server application.
 A host that needs to map an address to a name or a name to an address calls a
DNS client named a Resolver.
 The Resolver accesses the closest DNS server with a mapping request.
 If the server has the information, it satisfies the resolver; otherwise, it either
refers the resolver to other servers or asks other servers to provide the
information.
 After the resolver receives the mapping, it interprets the response to see if it is a
real resolution or an error and finally delivers the result to the process that
requested it.
 A resolution can be either recursive or iterative.

Recursive Resolution

 The application program on the source host calls the DNS resolver (client) to
find the IP address of the destination host. The resolver, which does not know
this address, sends the query to the local DNS server of the source (Event 1)
 The local server sends the query to a root DNS server (Event 2)
 The Root server sends the query to the top-level-DNS server(Event 3)
 The top-level DNS server knows only the IP address of the local DNS server at
the destination. So it forwards the query to the local server, which knows the IP
address of the destination host (Event 4)
 The IP address of the destination host is now sent back to the top-level DNS
server(Event 5) then back to the root server (Event 6), then back to the source
DNS server, which may cache it for the future queries (Event 7), and finally
back to the source host (Event 8).

54

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit-1

Iterative Resolution

 In iterative resolution, each server that does not know the mapping, sends the
IP address of the next server back to the one that requested it.
 The iterative resolution takes place between two local servers.
 The original resolver gets the final answer from the destination local server.
 The messages shown by Events 2, 4, and 6 contain the same query.
 However, the message shown by Event 3 contains the IP address of the top-
level domain server.
 The message shown by Event 5 contains the IP address of the destination local
DNS server
 The message shown by Event 7 contains the IP address of the destination.
 When the Source local DNS server receives the IP address of the destination, it
sends it to the resolver (Event 8).

DNS CACHING
 Each time a server receives a query for a name that is not in its domain, it needs
to search its database for a server IP address.
 DNS handles this with a mechanism called caching.
 When a server asks for a mapping from another server and receives the
response, it stores this information in its cache memory before sending it to the
client.
 If the same or another client asks for the same mapping, it can check its cache
memory and resolve the problem.
 However, to inform the client that the response is coming from the cache
memory and not from an authoritative source, the server marks the response as
unauthoritative.
 Caching speeds up resolution. Reduction of this search time would increase
efficiency, but it can also be problematic.
 If a server caches a mapping for a long time, it may send an outdated mapping
to the client.
 To counter this, two techniques are used.
 First, the authoritative server always adds information to the mapping
called time to live (TTL). It defines the time in seconds that the
receiving server can cache the information. After that time, the mapping
is invalid and any query must be sent again to the authoritative server.

55

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit-1

 Second, DNS requires that each server keep a TTL counter for each
mapping it caches. The cache memory must be searched periodically
and those mappings with an expired TTL must be purged.

DNS RESOURCE RECORDS (RR)

 The zone information associated with a server is implemented as a set of
resource records.
 In other words, a name server stores a database of resource records.
 A resource record is a 5-tuple structure :
(Domain Name, Type, Class, TTL, Value)
 The domain name identifies the resource record.
 The type defines how the value should be interpreted.
 The value defines the information kept about the domain name.
 The TTL defines the number of seconds for which the information is valid.
 The class defines the type of network

Types of Resource Records

DNS MESSAGES
 DNS has two types of messages: query and response.
 Both types have the same format.
 The query message consists of a header and question section.
 The response message consists of a header, question section, answer section,
authoritative section, and additional section .

 Header
 Both query and response messages have the same header format with
some fields set to zero for the query messages.
 The header fields are as follows:

56

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit-1

 The identification field is used by the client to match the response with
the query.
 The flag field defines whether the message is a query or response. It also
includes status of error.
 The next four fields in the header define the number of each record type
in the message.
 Question Section
 The question section consists of one or more question records. It is
present in both query and response messages.
 Answer Section
 The answer section consists of one or more resource records. It is
present only in response messages.
 Authoritative Section
 The authoritative section gives information (domain name) about one or
more authoritative servers for the query.
 Additional Information Section
 The additional information section provides additional information that
may help the resolver.

DNS CONNECTIONS
 DNS can use either UDP or TCP.
 In both cases the well-known port used by the server is port 53.
 UDP is used when the size of the response message is less than 512 bytes
because most UDP packages have a 512-byte packet size limit.
 If the size of the response message is more than 512 bytes, a TCP connection is
used.

DNS REGISTRARS
 New domains are added to DNS through a registrar. A fee is charged.
 A registrar first verifies that the requested domain name is unique and then
enters it into the DNS database.
 Today, there are many registrars; their names and addresses can be found at
http://www.intenic.net
 To register, the organization needs to give the name of its server and the IP
address of the server.
 For example, a new commercial organization named wonderful with a server
named ws and IP address 200.200.200.5, needs to give the following
information to one of the registrars:
Domain name: ws.wonderful.com IP address: 200.200.200.5

57

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit-1

DDNS (DYNAMIC DOMAIN NAME SYSTEM)

 In DNS, when there is a change, such as adding a new host, removing a host, or
changing an IP address, the change must be made to the DNS master file.
 The DNS master file must be updated dynamically.
 The Dynamic Domain Name System (DDNS) is used for this purpose.
 In DDNS, when a binding between a name and an address is determined, the
information is sent to a primary DNS server.
 The primary server updates the zone.
 The secondary servers are notified either actively or passively.
 In active notification, the primary server sends a message to the secondary
servers about the change in the zone, whereas in passive notification, the
secondary servers periodically check for any changes.
 In either case, after being notified about the change, the secondary server
requests information about the entire zone (called the zone transfer).
 To provide security and prevent unauthorized changes in the DNS records,
DDNS can use an authentication mechanism.

DNS SECURITY
 DNS is one of the most important systems in the Internet infrastructure; it
provides crucial services to Internet users.
 Applications such as Web access or e-mail are heavily dependent on the proper
operation of DNS.
 DNS can be attacked in several ways including:
 Attack on Confidentiality - The attacker may read the response of a DNS
server to find the nature or names of sites the user mostly accesses. This
type of information can be used to find the user’s profile. To prevent this
attack, DNS messages need to be confidential.
 Attack on authentication and integrity - The attacker may intercept the
response of a DNS server and change it or create a totally new bogus
response to direct the user to the site or domain the attacker wishes the user
to access. This type of attack can be prevented using message origin
authentication and message integrity.
 Attack on denial-of-service - The attacker may flood the DNS server to
overwhelm it or eventually crash it. This type of attack can be prevented
using the provision against denial-of-service attack.

 To protect DNS, IETF has devised a technology named DNS Security

(DNSSEC) that provides message origin authentication and message integrity
using a security service called digital signature.
 DNSSEC, however, does not provide confidentiality for the DNS messages.
 There is no specific protection against the denial-of-service attack in the
specification of DNSSEC. However, the caching system protects the upper-
level servers against this attack to some extent.

58

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit-1

SNMP (SIMPLE NETWORK MANAGEMENT PROTOCOL)

 The Simple Network Management Protocol (SNMP) is a framework for
managing devices in an internet using the TCP/IP protocol suite.
 SNMP is an application layer protocol that monitors and manages routers,
distributed over a network.
 It provides a set of operations for monitoring and managing the internet.
 SNMP uses services of UDP on two well-known ports: 161 (Agent) and 162
(manager).
 SNMP uses the concept of manager and agent.

SNMP MANAGER
 A manager is a host that runs the SNMP client program
 The manager has access to the values in the database kept by the agent.
 A manager checks the agent by requesting the information that reflects the
behavior of the agent.
 A manager also forces the agent to perform a certain function by resetting
values in the agent database.
 For example, a router can store in appropriate variables the number of packets
received and forwarded.
 The manager can fetch and compare the values of these two variables to see if
the router is congested or not.

SNMP AGENT
 The agent is a router that runs the SNMP server program.
 The agent is used to keep the information in a database while the manager is
used to access the values in the database.
 For example, a router can store the appropriate variables such as a number of
packets received and forwarded while the manager can compare these variables
to determine whether the router is congested or not.
 Agents can also contribute to the management process.
 A server program on the agent checks the environment, if something goes
wrong, the agent sends a warning message to the manager.

SNMP MANAGEMENT COMPONENTS

 Management of the internet is achieved through simple interaction between a
manager and agent.
 Management is achieved through the use of two protocols:

59

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit-1

o Structure of Management Information (SMI)

o Management Information Base (MIB).

Structure of Management Information (SMI)

 To use SNMP, we need rules for naming objects.
 SMI is a protocol that defines these rules.
 SMI is a guideline for SNMP
 It emphasizes three attributes to handle an object: name, data type, and
encoding method.
 Its functions are:
 To name objects.
 To define the type of data that can be stored in an object.
 To show how to encode data for transmission over the network.

Name
 SMI requires that each managed object (such as a router, a variable in a router,
a value,etc.) have a unique name. To name objects globally.
 SMI uses an object identifier, which is a hierarchical identifier based on a tree
structure.
 The tree structure starts with an unnamed root. Each object can be defined
using a sequence of integers separated by dots.
 The tree structure can also define an object using a sequence of textual names
separated by dots.
Type of data
 The second attribute of an object is the type of data stored in it.
 To define the data type, SMI uses Abstract Syntax Notation One (ASN.1)
definitions.
 SMI has two broad categories of data types: simple and structured.
 The simple data types are atomic data types. Some of them are taken directly
from ASN.1; some are added by SMI.
 SMI defines two structured data types: sequence and sequence of.
 Sequence - A sequence data type is a combination of simple data types,
not necessarily of the same type.
 Sequence of - A sequence of data type is a combination of simple data
types all of the same type or a combination of sequence data types all of
the same type.
Encoding data
 SMI uses another standard, Basic Encoding Rules (BER), to encode data to be
transmitted over the network.
 BER specifies that each piece of data be encoded in triplet format (TLV): tag,
length, value

60

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit-1

Management Information Base (MIB)

The Management Information Base (MIB) is the second component used in network
management.
 Each agent has its own MIB, which is a collection of objects to be managed.
 MIB classifies objects under groups.

MIB Variables
MIB variables are of two types namely simple and table.
 Simple variables are accessed using group-id followed by variable-id and 0
 Tables are ordered as column-row rules, i.e., column by column from top to
bottom. Only leaf elements are accessible in a table type.

SNMP MESSAGES/PDU
SNMP is request/reply protocol that supports various operations using PDUs.
SNMP defines eight types of protocol data units (or PDUs):
GetRequest, GetNext-Request, GetBulkRequest, SetRequest, Response,
Trap,InformRequest, and Report

GetRequest
 The GetRequest PDU is sent from the manager (client) to the agent (server) to
retrieve the value of a variable or a set of variables.

GetNextRequest
 The GetNextRequest PDU is sent from the manager to the agent to retrieve the
value of a variable.

61

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit-1

GetBulkRequest
 The GetBulkRequest PDU is sent from the manager to the agent to retrieve a large
amount of data. It can be used instead of multiple GetRequest and
GetNextRequest PDUs.

SetRequest
 The SetRequest PDU is sent from the manager to the agent to set (store) a
value in a variable.

Response
 The Response PDU is sent from an agent to a manager in response to GetRequest
or GetNextRequest. It contains the value(s) of the variable(s) requested by the
manager.

Trap
 The Trap PDU is sent from the agent to the manager to report an event. For
example, if the agent is rebooted, it informs the manager and reports the time of
rebooting.

InformRequest
 The InformRequest PDU is sent from one manager to another remote manager to
get the value of some variables from agents under the control of the remote
manager. The remote manager responds with a Response PDU.

Report
 The Report PDU is designed to report some types of errors between managers.

62

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit 2

UNIT – IV : TRANSPORT LAYER

Introduction - Transport-Layer Protocols: UDP – TCP: Connection
Management – Flow control -Congestion Control - Congestion avoidance
(DECbit, RED) – SCTP – Quality of Service

1. INTRODUCTION
 The transport layer is the fourth layer of the OSI model and is the core of the Internet
model.
 It responds to service requests from the session layer and issues service requests to
the network Layer.
 The transport layer provides transparent transfer of data between hosts.
 It provides end-to-end control and information transfer with the quality of service
needed by the application program.
 It is the first true end-to-end layer, implemented in all End Systems (ES).

TRANSPORT LAYER FUNCTIONS / SERVICES

 The transport layer is located between the network layer and the application layer.
 The transport layer is responsible for providing services to the application layer; it
receives services from the network layer.
 The services that can be provided by the transport layer are
1. Process-to-Process Communication
2. Addressing : Port Numbers
3. Encapsulation and Decapsulation
4. Multiplexing and Demultiplexing
5. Flow Control
6. Error Control
7. Congestion Control

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit 2

Flow Control
 Flow Control is the process of managing the rate of data transmission between two
nodes to prevent a fast sender from overwhelming a slow receiver.
 It provides a mechanism for the receiver to control the transmission speed, so that the
receiving node is not overwhelmed with data from transmitting node.

Congestion Control
 Congestion in a network may occur if the load on the network (the number of
packets sent to the network) is greater than the capacity of the network (the number
of packets a network can handle).
 Congestion control refers to the mechanisms and techniques that control the
congestion and keep the load below the capacity.
 Congestion Control refers to techniques and mechanisms that can either prevent
congestion, before it happens, or remove congestion, after it has happened
 Congestion control mechanisms are divided into two categories,
1. Open loop - prevent the congestion before it happens.
2. Closed loop - remove the congestion after it happens.

2. TRANSPORT LAYER PROTOCOLS

 Three protocols are associated with the Transport layer.

 They are
(1) UDP –User Datagram Protocol
(2) TCP – Transmission Control Protocol
(3) SCTP - Stream Control Transmission Protocol

 Each protocol provides a different type of service and should be used appropriately.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit 2

UDP - UDP is an unreliable connectionless transport-layer protocol used for its simplicity
and efficiency in applications where error control can be provided by the application-layer
process.

TCP - TCP is a reliable connection-oriented protocol that can be used in any application
where reliability is important.

SCTP - SCTP is a new transport-layer protocol designed to combine some features of UDP
and TCP in an effort to create a better protocol for multimedia communication.

3. USER DATAGRAM PROTOCOL (UDP)

 User Datagram Protocol (UDP) is a connectionless, unreliable transport protocol.

 UDP adds process-to-process communication to best-effort service provided by IP.
 UDP is a very simple protocol using a minimum of overhead.
 UDP is a simple demultiplexer, which allows multiple processes on each host to
communicate.
 UDP does not provide flow control , reliable or ordered delivery.
 UDP can be used to send small message where reliability is not expected.
 Sending a small message using UDP takes much less interaction between the sender
and receiver.
 UDP allow processes to indirectly identify each other using an abstract locator called
port or mailbox

UDP PORTS
 Processes (server/client) are identified by an abstract locator known as port.
 Server accepts message at well known port.
 Some well-known UDP ports are 7–Echo, 53–DNS, 111–RPC, 161–SNMP, etc.
 < port, host > pair is used as key for demultiplexing.
 Ports are implemented as a message queue.
 When a message arrives, UDP appends it to end of the queue.
 When queue is full, the message is discarded.
 When a message is read, it is removed from the queue.
 When an application process wants to receive a message, one is removed from the
front of the queue.
 If the queue is empty, the process blocks until a message becomes available.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit 2

UDP DATAGRAM (PACKET) FORMAT

 UDP packets are known as user datagrams .
 These user datagrams, have a fixed-size header of 8 bytes made of four fields, each
of 2 bytes (16 bits).

Source Port Number

 Port number used by process on source host with 16 bits long.
 If the source host is client (sending request) then the port number is an temporary
one requested by the process and chosen by UDP.
 If the source is server (sending response) then it is well known port number.

Destination Port Number

 Port number used by process on Destination host with 16 bits long.
 If the destination host is the server (a client sending request) then the
port number is a well known port number.
 If the destination host is client (a server sending response) then port number
is an temporary one copied by server from the request packet.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit 2

Length
 This field denotes the total length of the UDP Packet (Header plus data)
 The total length of any UDP datagram can be from 0 to 65,535 bytes.

Checksum
 UDP computes its checksum over the UDP header, the contents of the message
body, and something called the pseudoheader.
 The pseudoheader consists of three fields from the IP header—protocol number,
source IP address, destination IP address plus the UDP length field.
Data
 Data field defines tha actual payload to be transmitted.
 Its size is variable.

UDP SERVICES
Process-to-Process Communication
 UDP provides process-to-process communication using socket addresses, a
combination of IP addresses and port numbers.

Connectionless Services
 UDP provides a connectionless service.
 There is no connection establishment and no connection termination .
 Each user datagram sent by UDP is an independent datagram.
 There is no relationship between the different user datagrams even if they are
 coming from the same source process and going to the same destination program.
 The user datagrams are not numbered.
 Each user datagram can travel on a different path.

Flow Control
 UDP is a very simple protocol.
 There is no flow control, and hence no window mechanism.
 The receiver may overflow with incoming messages.
 The lack of flow control means that the process using UDP should provide for this
service, if needed.

Error Control
 There is no error control mechanism in UDP except for the checksum.
 This means that the sender does not know if a message has been lost or duplicated.
 When the receiver detects an error through the checksum, the user datagram is
silently discarded.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit 2

 The lack of error control means that the process using UDP should provide for this
service, if needed.

Checksum
 UDP checksum calculation includes three sections: a pseudoheader, the UDP header,
and the data coming from the application layer.
 The pseudoheader is the part of the header in which the user datagram is to be
encapsulated with some fields filled with 0s.

Optional Inclusion of Checksum

 The sender of a UDP packet can choose not to calculate the checksum.
 In this case, the checksum field is filled with all 0s before being sent.
 In the situation where the sender decides to calculate the checksum,
but it happens that the result is all 0s, the checksum is changed to all 1s
before the packet is sent.
 In other words, the sender complements the sum two times.

Congestion Control
 Since UDP is a connectionless protocol, it does not provide congestion control.
 UDP assumes that the packets sent are small and sporadic(occasionally or at irregular
intervals) and cannot create congestion in the network.
 This assumption may or may not be true, when UDP is used for interactive real-time
transfer of audio and video.

Encapsulation and Decapsulation

 To send a message from one process to another, the UDP protocol encapsulates and
decapsulates messages.

Queuing
 In UDP, queues are associated with ports.
 At the client site, when a process starts, it requests a port number from the operating
system.
 Some implementations create both an incoming and an outgoing queue associated
with each process.
 Other implementations create only an incoming queue associated with each process.

Multiplexing and Demultiplexing

 In a host running a transport protocol suite, there is only one UDP but possibly
several processes that may want to use the services of UDP.
 To handle this situation, UDP multiplexes and demultiplexes.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit 2

APPLICATIONS OF UDP
 UDP is used for management processes such as SNMP.
 UDP is used for route updating protocols such as RIP.
 UDP is a suitable transport protocol for multicasting. Multicasting capability is
embedded in the UDP software
 UDP is suitable for a process with internal flow and error control mechanisms such
as Trivial File Transfer Protocol (TFTP).
 UDP is suitable for a process that requires simple request-response communication
with little concern for flow and error control.
 UDP is normally used for interactive real-time applications that cannot tolerate
uneven delay between sections of a received message.

4. TRANSMISSION CONTROL PROTOCOL (TCP)

 TCP is a reliable, connection-oriented, byte-stream protocol.

 TCP guarantees the reliable, in-order delivery of a stream of bytes. It is a full-duplex
protocol, meaning that each TCP connection supports a pair of byte streams, one
flowing in each direction.
 TCP includes a flow-control mechanism for each of these byte streams that allow the
receiver to limit how much data the sender can transmit at a given time.
 TCP supports a demultiplexing mechanism that allows multiple application programs
on any given host to simultaneously carry on a conversation with their peers.
 TCP also implements congestion-control mechanism. The idea of this mechanism is
to prevent sender from overloading the network.
 Flow control is an end to end issue, whereas congestion control is concerned with
how host and network interact.

TCP SERVICES
Process-to-Process Communication
 TCP provides process-to-process communication using port numbers.
Stream Delivery Service
 TCP is a stream-oriented protocol.
 TCP allows the sending process to deliver data as a stream of bytes and allows the
receiving process to obtain data as a stream of bytes.
 TCP creates an environment in which the two processes seem to be connected by an
imaginary ―tube‖ that carries their bytes across the Internet.
 The sending process produces (writes to) the stream and the receiving process
consumes (reads from) it.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit 2

Full-Duplex Communication
 TCP offers full-duplex service, where data can flow in both directions at the same
time.
 Each TCP endpoint then has its own sending and receiving buffer, and segments
move in both directions.

Multiplexing and Demultiplexing

TCP performs multiplexing at the sender and demultiplexing at the receiver.

Connection-Oriented Service
 TCP is a connection-oriented protocol.
 A connection needs to be established for each pair of processes.
 When a process at site A wants to send to and receive data from another
process at site B, the following three phases occur:
1. The two TCP’s establish a logical connection between them.
2. Data are exchanged in both directions.
3. The connection is terminated.

Reliable Service
 TCP is a reliable transport protocol.
 It uses an acknowledgment mechanism to check the safe and sound arrival of data.

TCP SEGMENT
 A packet in TCP is called a segment.
 Data unit exchanged between TCP peers are called segments.
 A TCP segment encapsulates the data received from the application layer.
 The TCP segment is encapsulated in an IP datagram, which in turn is encapsulated in
a frame at the data-link layer.

11

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit 2

 TCP is a byte-oriented protocol, which means that the sender writes bytes into a TCP
connection and the receiver reads bytes out of the TCP connection.
 TCP does not, itself, transmit individual bytes over the Internet.
 TCP on the source host buffers enough bytes from the sending process to fill a
reasonably sized packet and then sends this packet to its peer on the destination host.
 TCP on the destination host then empties the contents of the packet into a receive
buffer, and the receiving process reads from this buffer at its leisure.
 TCP connection supports byte streams flowing in both directions.
 The packets exchanged between TCP peers are called segments, since each one
carries a segment of the byte stream.

TCP PACKET FORMAT

 Each TCP segment contains the header plus the data.
 The segment consists of a header of 20 to 60 bytes, followed by data from the
application program.
 The header is 20 bytes if there are no options and up to 60 bytes if it contains
options.

SrcPort and DstPort―port number of source and destination process.

SequenceNum―contains sequence number, i.e. first byte of data segment.
Acknowledgment― byte number of segment, the receiver expects next.
HdrLen―Length of TCP header as 4-byte words.
Flags― contains six control bits known as flags.
o URG — segment contains urgent data.
o ACK — value of acknowledgment field is valid.
o PUSH — sender has invoked the push operation.
o RESET — receiver wants to abort the connection.
o SYN — synchronize sequence numbers during connection establishment.
o FIN — terminates the TCP connection.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit 2

Advertised Window―defines receiver’s window size and acts as flow control.

Checksum―It is computed over TCP header, Data, and pseudo header containing IP fields
(Length, SourceAddr & DestinationAddr).
UrgPtr ― used when the segment contains urgent data. It defines a value that must be
added to the sequence number.
Options - There can be up to 40 bytes of optional information in the TCP header.

TCP CONNECTION MANAGEMENT

 TCP is connection-oriented.
 A connection-oriented transport protocol establishes a logical path between the
source and destination.
 All of the segments belonging to a message are then sent over this logical path.
 In TCP, connection-oriented transmission requires three phases:
Connection Establishment, Data Transfer and Connection Termination.

Connection Establishment
 While opening a TCP connection the two nodes(client and server) want to agree on a
set of parameters.
 The parameters are the starting sequence numbers that is to be used for their
respective byte streams.
 Connection establishment in TCP is a three-way handshaking.

1. Client sends a SYN segment to the server containing its initial sequence number (Flags
= SYN, SequenceNum = x)
2. Server responds with a segment that acknowledges client’s segment and specifies its
initial sequence number (Flags = SYN + ACK, ACK = x + 1 SequenceNum = y).
3. Finally, client responds with a segment that acknowledges server’s sequence number
(Flags = ACK, ACK = y + 1).

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit 2

 The reason that each side acknowledges a sequence number that is one larger
than the one sent is that the Acknowledgment field actually identifies the ―next
sequence number expected,‖
 A timer is scheduled for each of the first two segments, and if the expected
response is not received, the segment is retransmitted.

Data Transfer
 After connection is established, bidirectional data transfer can take place.
 The client and server can send data and acknowledgments in both directions.
 The data traveling in the same direction as an acknowledgment are carried on the
same segment.
 The acknowledgment is piggybacked with the data.

Connection Termination
 Connection termination or teardown can be done in two ways :
Three-way Close and Half-Close

Three-way Close—Both client and server close simultaneously.

 Client sends a FIN segment.

 The FIN segment can include last
chunk of data.
 Server responds with FIN + ACK
segment to inform its closing.
 Finally, client sends an ACK
segment

Half-Close—Client stops sending but receives data.

 Client half-closes the
connection by sending a FIN
segment.
 Server sends an ACK segment.
 Data transfer from client to the
server stops.
 After sending all data, server sends
FIN segment to client, which is
acknowledged by the client.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit 2

STATE TRANSITION DIAGRAM

 To keep track of all the different events happening during connection establishment,
connection termination, and data transfer, TCP is specified as the finite state machine
(FSM).
 The transition from one state to another is shown using directed lines.
 States involved in opening and closing a connection is shown above and below
ESTABLISHED state respectively.
 States Involved in TCP :

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit 2

Opening a TCP Connection

1. Server invokes a passive open on TCP, which causes TCP to move to LISTEN state
2. Client does an active open, which causes its TCP to send a SYN segment to the server
and move to SYN_SENT state.
3. When SYN segment arrives at the server, it moves to SYN_RCVD state and responds
with a SYN + ACK segment.
4. Arrival of SYN + ACK segment causes the client to move to ESTABLISHED state
and sends an ACK to the server.
5. When ACK arrives, the server finally moves to ESTABLISHED state.

Closing a TCP Connection

 Client / Server can independently close its half of the connection or simultaneously.
Transitions from ESTABLISHED to CLOSED state are:
One side closes:
ESTABLISHED → FIN_WAIT_1 → FIN_WAIT_2 → TIME_WAIT → CLOSED
Other side closes:
ESTABLISHED → CLOSE_WAIT → LAST_ACK → CLOSED
Simultaneous close:
ESTABLISHED → FIN_WAIT_1 → CLOSING → TIME_WAIT → CLOSED

TCP FLOW CONTROL

 TCP uses a variant of sliding window known as adaptive flow control that:
o guarantees reliable delivery of data
o ensures ordered delivery of data
o enforces flow control at the sender
 Receiver advertises its window size to the sender using AdvertisedWindow field.
 Sender thus cannot have unacknowledged data greater than AdvertisedWindow.

16

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit 2

Send Buffer
 Sending TCP maintains send buffer which contains 3 segments
(1) acknowledged data
(2) unacknowledged data
(3) data to be transmitted.
 Send buffer maintains three pointers
(1) LastByteAcked, (2) LastByteSent, and (3) LastByteWritten
such that:
LastByteAcked ≤ LastByteSent ≤ LastByteWritten
 A byte can be sent only after being written and only a sent byte can be
acknowledged.
 Bytes to the left of LastByteAcked are not kept as it had been acknowledged.

Receive Buffer
 Receiving TCP maintains receive buffer to hold data even if it arrives out-of-order.
 Receive buffer maintains three pointers namely
(1) LastByteRead, (2) NextByteExpected, and (3) LastByteRcvd
such that:
LastByteRead ≤ NextByteExpected ≤ LastByteRcvd + 1
 A byte cannot be read until that byte and all preceding bytes have been received.
 If data is received in order, then NextByteExpected = LastByteRcvd + 1
 Bytes to the left of LastByteRead are not buffered, since it is read by the application.

Flow Control in TCP

 Size of send and receive buffer is MaxSendBuffer and MaxRcvBuffer respectively.
 Sending TCP prevents overflowing of send buffer by maintaining
LastByteWritten − LastByteAcked ≤ MaxSendBuffer
 Receiving TCP avoids overflowing its receive buffer by maintaining
LastByteRcvd − LastByteRead ≤ MaxRcvBuffer
 Receiver throttles the sender by having AdvertisedWindow based on free space

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit 2

available for buffering.

AdvertisedWindow = MaxRcvBuffer − ((NextByteExpected − 1) – LastByteRead)
 Sending TCP adheres to AdvertisedWindow by computing EffectiveWindow that
limits how much data it should send.
EffectiveWindow = AdvertisedWindow − (LastByteSent − LastByteAcked)
 When data arrives, LastByteRcvd moves to its right and AdvertisedWindow shrinks.
 Receiver acknowledges only, if preceding bytes have arrived.
 AdvertisedWindow expands when data is read by the application.
o If data is read as fast as it arrives then
AdvertisedWindow = MaxRcvBuffer
o If data is read slowly, it eventually leads to a AdvertisedWindow of size 0.
 AdvertisedWindow field is designed to allow sender to keep the pipe full.

TCP TRANSMISSION
 TCP has three mechanism to trigger the transmission of a segment.
 They are
o Maximum Segment Size (MSS) - Silly Window Syndrome
o Timeout - Nagle’s Algorithm

Silly Window Syndrome

 When either the sending application program creates data slowly or the receiving
application program consumes data slowly, or both, problems arise.
 Any of these situations results in the sending of data in very small segments, which
reduces the efficiency of the operation.
 This problem is called the silly window syndrome.
 The sending TCP may create a silly window syndrome if it is serving an application
program that creates data slowly, for example, 1 byte at a time.
 The application program writes 1 byte at a time into the buffer of the sending TCP.
 The result is a lot of 1-byte segments that are traveling through an internet.
 The solution is to prevent the sending TCP from sending the data byte by byte.
 The sending TCP must be forced to wait and collect data to send in a larger block.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit 2

Nagle’s Algorithm
 If there is data to send but is less than MSS, then we may want to wait some amount
of time before sending the available data
 If we wait too long, then it may delay the process.
 If we don’t wait long enough, it may end up sending small segments resulting in
Silly Window Syndrome.
 The solution is to introduce a timer and to transmit when the timer expires
 Nagle introduced an algorithm for solving this problem

TCP CONGESTION CONTROL

 Congestion occurs if load (number of packets sent) is greater than capacity of the
network (number of packets a network can handle).
 When load is less than network capacity, throughput increases proportionally.
 When load exceeds capacity, queues become full and the routers discard some
packets and throughput declines sharply.
 When too many packets are contending for the same link
o The queue overflows
o Packets get dropped
o Network is congested
 Network should provide a congestion control mechanism to deal with such a
situation.
 TCP maintains a variable called CongestionWindow for each connection.
 TCP Congestion Control mechanisms are:

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit 2

1. Additive Increase / Multiplicative Decrease (AIMD)

2. Slow Start
3. Fast Retransmit and Fast Recovery

Additive Increase / Multiplicative Decrease (AIMD)

 TCP source initializes CongestionWindow based on congestion level in the network.
 Source increases CongestionWindow when level of congestion goes down and
decreases the same when level of congestion goes up.
 TCP interprets timeouts as a sign of congestion and reduces the rate of transmission.
 On timeout, source reduces its CongestionWindow by half, i.e., multiplicative
decrease. For example, if CongestionWindow = 16 packets, after timeout it is 8.
 Value of CongestionWindow is never less than maximum segment size (MSS).
 When ACK arrives CongestionWindow is incremented marginally, i.e., additive
increase.
Increment = MSS × (MSS/CongestionWindow)
CongestionWindow += Increment
 For example, when ACK arrives for 1 packet, 2 packets are sent. When ACK for both
packets arrive, 3 packets are sent and so on.
 CongestionWindow increases and decreases throughout lifetime of the connection.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit 2

 When CongestionWindow is plotted as a function of time, a saw-tooth pattern

results.

Slow Start
 Slow start is used to increase CongestionWindow exponentially from a cold start.
 Source TCP initializes CongestionWindow to one packet.
 TCP doubles the number of packets sent every RTT on successful transmission.
 When ACK arrives for first packet TCP adds 1 packet to CongestionWindow and
sends two packets.
 When two ACKs arrive, TCP increments CongestionWindow by 2 packets and sends
four packets and so on.
 Instead of sending entire permissible packets at once (bursty traffic), packets are sent
in a phased manner, i.e., slow start.
 Initially TCP has no idea about congestion, henceforth it increases
CongestionWindow rapidly until there is a timeout. On timeout:
CongestionThreshold = CongestionWindow/ 2
CongestionWindow = 1
 Slow start is repeated until CongestionWindow reaches CongestionThreshold and
thereafter 1 packet per RTT.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit 2

 The congestion window trace will look like

Fast Retransmit And Fast Recovery

 TCP timeouts led to long periods of time during which the connection went dead
while waiting for a timer to expire.
 Fast retransmit is a heuristic approach that triggers retransmission of a dropped
packet sooner than the regular timeout mechanism. It does not replace regular
timeouts.
 When a packet arrives out of order, receiving TCP resends the same
acknowledgment (duplicate ACK) it sent last time.
 When three duplicate ACK arrives at the sender, it infers that corresponding packet
may be lost due to congestion and retransmits that packet. This is called fast
retransmit before regular timeout.
 When packet loss is detected using fast retransmit, the slow start phase is replaced by
additive increase, multiplicative decrease method. This is known as fast recovery.
 Instead of setting CongestionWindow to one packet, this method uses the ACKs that
are still in pipe to clock the sending of packets.
 Slow start is only used at the beginning of a connection and after regular timeout. At
other times, it follows a pure AIMD pattern.






https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit 2

 For example, packets 1 and 2 are received whereas packet 3 gets lost.
o Receiver sends a duplicate ACK for packet 2 when packet 4 arrives.
o Sender receives 3 duplicate ACKs after sending packet 6 retransmits packet 3.
o When packet 3 is received, receiver sends cumulative ACK up to packet 6.
 The congestion window trace will look like

TCP CONGESTION AVOIDANCE

 Congestion avoidance mechanisms prevent congestion before it actually occurs.
 These mechanisms predict when congestion is about to happen and then to reduce the
rate at which hosts send data just before packets start being discarded.
 TCP creates loss of packets in order to determine bandwidth of the connection.
 Routers help the end nodes by intimating when congestion is likely to occur.
 Congestion-avoidance mechanisms are:
o DEC bit - Destination Experiencing Congestion Bit
o RED - Random Early Detection

Dec Bit - Destination Experiencing Congestion Bit

 The first mechanism developed for use on the Digital Network Architecture (DNA).

 The idea is to evenly split the responsibility for congestion control between the
routers and the end nodes.

 Each router monitors the load it is experiencing and explicitly notifies the end nodes
when congestion is about to occur.

 This notification is implemented by setting a binary congestion bit in the packets that
flow through the router; hence the name DECbit.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit 2

 The destination host then copies this congestion bit into the ACK it sends back to the
source.

 The Source checks how many ACK has DEC bit set for previous window packets.

 If less than 50% of ACK have DEC bit set, then source increases its congestion
window by 1 packet

 Otherwise, decreases the congestion window by 87.5%.

 Finally, the source adjusts its sending rate so as to avoid congestion.

 Increase by 1, decrease by 0.875 rule was based on AIMD for stabilization.

 A single congestion bit is added to the packet header.

 Using a queue length of 1 as the trigger for setting the congestion bit.

 A router sets this bit in a packet if its average queue length is greater than or equal to
1 at the time the packet arrives.

Computing average queue length at a router using DEC bit

 Average queue length is measured over a time interval that includes the
last busy + last idle cycle + current busy cycle.
 It calculates the average queue length by dividing the curve area with time interval.

Red - Random Early Detection

 The second mechanism of congestion avoidance is called as Random Early
Detection (RED).

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit 2

 Each router is programmed to monitor its own queue length, and when it detects that
there is congestion, it notifies the source to adjust its congestion window.
 RED differs from the DEC bit scheme by two ways:
a. In DECbit, explicit notification about congestion is sent to source, whereas
RED implicitly notifies the source by dropping a few packets.

b. DECbit may lead to tail drop policy, whereas RED drops packet based on
drop probability in a random manner. Drop each arriving packet with some
drop probability whenever the queue length exceeds some drop level. This
idea is called early random drop.

Computation of average queue length using RED

 AvgLen = (1 − Weight) × AvgLen + Weight × SampleLen

where 0 < Weight < 1 and
SampleLen – is the length of the queue when a
sample measurement is made.
 The queue length is measured every time a new packet arrives at the gateway.

 RED has two queue length thresholds that trigger certain activity: MinThreshold and
MaxThreshold
 When a packet arrives at a gateway it compares Avglen with these two values
according to the following rules.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit 2

5. STREAM CONTROL TRANSMISSION PROTOCOL (SCTP)

 Stream Control Transmission Protocol (SCTP) is a reliable, message-oriented

transport layer protocol.
 SCTP has mixed features of TCP and UDP.
 SCTP maintains the message boundaries and detects the lost data, duplicate data as
well as out-of-order data.
 SCTP provides the Congestion control as well as Flow control.
 SCTP is especially designed for internet applications as well as multimedia
communication.

SCTP SERVICES

Process-to-Process Communication
 SCTP provides process-to-process communication.

Multiple Streams
 SCTP allows multistream service in each connection, which is called association in
SCTP terminology.
 If one of the streams is blocked, the other streams can still deliver their data.

Multihoming
 An SCTP association supports multihoming service.
 The sending and receiving host can define multiple IP addresses in each end for an
association.
 In this fault-tolerant approach, when one path fails, another interface can be used for
data delivery without interruption.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit 2

Full-Duplex Communication
 SCTP offers full-duplex service, where data can flow in both directions at the same
time. Each SCTP then has a sending and receiving buffer and packets are sent in both
directions.

Connection-Oriented Service
 SCTP is a connection-oriented protocol.
 In SCTP, a connection is called an association.
 If a client wants to send and receive message from server , the steps are :
Step1: The two SCTPs establish the connection with each other.
Step2: Once the connection is established, the data gets exchanged in both the
directions.
Step3: Finally, the association is terminated.

Reliable Service
 SCTP is a reliable transport protocol.
 It uses an acknowledgment mechanism to check the safe and sound arrival of data.

SCTP PACKET FORMAT

An SCTP packet has a mandatory general header and a set of blocks called chunks.

General Header
 The general header (packet header) defines the end points of each association to
which the packet belongs
 It guarantees that the packet belongs to a particular association
 It also preserves the integrity of the contents of the packet including the header itself.
 There are four fields in the general header.
Source port
This field identifies the sending port.

Destination port
This field identifies the receiving port that hosts use to route the packet to the
appropriate endpoint/application.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit 2

Verification tag
A 32-bit random value created during initialization to distinguish stale packets
from a previous connection.
Checksum
The next field is a checksum. The size of the checksum is 32 bits. SCTP uses
CRC-32 Checksum.

Chunks
 Control information or user data are carried in chunks.
 Chunks have a common layout.
 The first three fields are common to all chunks; the information field depends on the
type of chunk.

 The type field can define up to 256 types of chunks. Only a few have been defined so
far; the rest are reserved for future use.
 The flag field defines special flags that a particular chunk may need.
 The length field defines the total size of the chunk, in bytes, including the type, flag,
and length fields.

Types of Chunks
 An SCTP association may send many packets, a packet may contain several chunks,
and chunks may belong to different streams.
 SCTP defines two types of chunks - Control chunks and Data chunks.
 A control chunk controls and maintains the association.
 A data chunk carries user data.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit 2

SCTP ASSOCIATION
 SCTP is a connection-oriented protocol.
 A connection in SCTP is called an association to emphasize multihoming.
 SCTP Associations consists of three phases:
 Association Establishment
 Data Transfer
 Association Termination

Association Establishment
 Association establishment in SCTP requires a four-way handshake.
 In this procedure, a client process wants to establish an association with a server
process using SCTP as the transport-layer protocol.
 The SCTP server needs to be prepared to receive any association (passive open).
 Association establishment, however, is initiated by the client (active open).

 The client sends the first packet, which contains an INIT chunk.
 The server sends the second packet, which contains an INIT ACK chunk. The INIT
ACK also sends a cookie that defines the state of the server at this moment.
 The client sends the third packet, which includes a COOKIE ECHO chunk. This is a
very simple chunk that echoes, without change, the cookie sent by the server. SCTP
allows the inclusion of data chunks in this packet.
 The server sends the fourth packet, which includes the COOKIE ACK chunk that
acknowledges the receipt of the COOKIE ECHO chunk. SCTP allows the inclusion
of data chunks with this packet.

Data Transfer
 The whole purpose of an association is to transfer data between two ends.
 After the association is established, bidirectional data transfer can take place.
 The client and the server can both send data.
 SCTP supports piggybacking.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit 2

 Types of SCTP data Transfer :

1. Multihoming Data Transfer
 Data transfer, by default, uses the primary address of the destination.
 If the primary is not available, one of the alternative addresses is used.
 This is called Multihoming Data Transfer.

2. Multistream Delivery
 SCTP can support multiple streams, which means that the sender process
can define different streams and a message can belong to one of these
streams.
 Each stream is assigned a stream identifier (SI) which uniquely defines
that stream.
 SCTP supports two types of data delivery in each stream: ordered (default)
and unordered.

Association Termination
 In SCTP,either of the two parties involved in exchanging data (client or server) can
close the connection.
 SCTP does not allow a ―half closed‖ association. If one end closes the association,
the other end must stop sending new data.
 If any data are left over in the queue of the recipient of the termination request, they
are sent and the association is closed.
 Association termination uses three packets.

SCTP FLOW CONTROL

 Flow control in SCTP is similar to that in TCP.
 Current SCTP implementations use a byte-oriented window for flow control.

Receiver Site
 The receiver has one buffer (queue) and three variables.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit 2

 The queue holds the received data chunks that have not yet been read by the process.
 The first variable holds the last TSN received, cumTSN.
 The second variable holds the available buffer size; winsize.
 The third variable holds the last accumulative acknowledgment, lastACK.
 The following figure shows the queue and variables at the receiver site.

 When the site receives a data chunk, it stores it at the end of the buffer (queue) and
subtracts the size of the chunk from winSize.
 The TSN number of the chunk is stored in the cumTSN variable.
 When the process reads a chunk, it removes it from the queue and adds the size of the
removed chunk to winSize (recycling).
 When the receiver decides to send a SACK, it checks the value of lastAck; if it is less
than cumTSN, it sends a SACK with a cumulative TSN number equal to the
cumTSN.
 It also includes the value of winSize as the advertised window size.

Sender Site
 The sender has one buffer (queue) and three variables: curTSN, rwnd, and inTransit.
 We assume each chunk is 100 bytes long. The buffer holds the chunks produced by
the process that either have been sent or are ready to be sent.
 The first variable, curTSN, refers to the next chunk to be sent.
 All chunks in the queue with a TSN less than this value have been sent, but not
acknowledged; they are outstanding.
 The second variable, rwnd, holds the last value advertised by the receiver (in bytes).
 The third variable, inTransit, holds the number of bytes in transit, bytes sent but not
yet acknowledged.
 The following figure shows the queue and variables at the sender site.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit 2

 A chunk pointed to by curTSN can be sent if the size of the data is less than or equal
to the quantity rwnd - inTransit.
 After sending the chunk, the value of curTSN is incremented by 1 and now points to
the next chunk to be sent.
 The value of inTransit is incremented by the size of the data in the transmitted chunk.
 When a SACK is received, the chunks with a TSN less than or equal to the
cumulative TSN in the SACK are removed from the queue and discarded. The sender
does not have to worry about them anymore.
 The value of inTransit is reduced by the total size of the discarded chunks.
 The value of rwnd is updated with the value of the advertised window in the SACK.

SCTP ERROR CONTROL

 SCTP is a reliable transport layer protocol.
 It uses a SACK chunk to report the state of the receiver buffer to the sender.
 Each implementation uses a different set of entities and timers for the receiver and
sender sites.

Receiver Site
 The receiver stores all chunks that have arrived in its queue including the out-of-
order ones. However, it leaves spaces for any missing chunks.
 It discards duplicate messages, but keeps track of them for reports to the sender.
 The following figure shows a typical design for the receiver site and the state of the
receiving queue at a particular point in time.

 The available window size is 1000 bytes.

 The last acknowledgment sent was for data chunk 20.
 Chunks 21 to 23 have been received in order.
 The first out-of-order block contains chunks 26 to 28.
 The second out-of-order block contains chunks 31 to 34.
 A variable holds the value of cumTSN.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com
CS3591 – Computer Networks Unit 2

 An array of variables keeps track of the beginning and the end of each block that is
out of order.
 An array of variables holds the duplicate chunks received.
 There is no need for storing duplicate chunks in the queue and they will be discarded.

Sender Site
 At the sender site, it needs two buffers (queues): a sending queue and a
retransmission queue.
 Three variables were used - rwnd, inTransit, and curTSN as described in the previous
section.
 The following figure shows a typical design.

 The sending queue holds chunks 23 to 40.

 The chunks 23 to 36 have already been sent, but not acknowledged; they are
outstanding chunks.
 The curTSN points to the next chunk to be sent (37).
 We assume that each chunk is 100 bytes, which means that 1400 bytes of data
(chunks 23 to 36) is in transit.
 The sender at this moment has a retransmission queue.
 When a packet is sent, a retransmission timer starts for that packet (all data chunks in
that packet).
 Some implementations use one single timer for the entire association, but other
implementations use one timer for each packet.

SCTP CONGESTION CONTROL

 SCTP is a transport-layer protocol with packets subject to congestion in the network.

 The SCTP designers have used the same strategies for congestion control as those
used in TCP.
NOTE : REFER TCP CONGESTION CONTROL

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 CS3591 – Computerwww.BrainKart.com
Networks Unit 3

UNIT III - NETWORK LAYER

Switching : Packet Switching - Internet protocol - IPV4 – IP

Addressing – Subnetting - IPV6, ARP, RARP, ICMP, DHCP

1. NETWORK LAYER SERVICES

 The network layer in the TCP/IP protocol suite is responsible for the host-to-
host delivery of datagrams.
 It provides services to the transport layer and receives services from the data-
link layer.
 The network layer translates the logical addresses into physical addresses
 It determines the route from the source to the destination and also manages the
traffic problems such as switching, routing and controls the congestion of data
packets.
 The main role of the network layer is to move the packets from sending host to
the receiving host.

Services provided by network layer are

PACKETIZING
 The first duty of the network layer is definitely packetizing.
 This means encapsulating the payload (data received from upper layer) in a
network-layer packet at the source and decapsulating the payload from the
network-layer packet at the destination.
 The network layer is responsible for delivery of packets from a sender to a
receiver without changing or using the contents.

ROUTING AND FORWARDING

Routing
 The network layer is responsible for routing the packet from its source to the
destination.
 The network layer is responsible for finding the best one among these possible
routes.
 The network layer needs to have some specific strategies for defining the best
route.
 Routing is the concept of applying strategies and running routing protocols to
create the decision-making tables for each router.
 These tables are called as routing tables.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 CS3591 – Computerwww.BrainKart.com
Networks Unit 3

Forwarding
 Forwarding can be defined as the action applied by each router when a
packetarrives at one of its interfaces.
 The decision-making table, a router normally uses for applying this
action iscalled the forwarding table.
 When a router receives a packet from one of its attached networks, it
needs toforward the packet to another attached network.

ERROR CONTROL
 The network layer in the Internet does not directly provide error control.
 It adds a checksum field to the datagram to control any corruption in
theheader, but not in the whole datagram.
 This checksum prevents any changes or corruptions in the header of the
datagram.
 The Internet uses an auxiliary protocol called ICMP, that provides some
kind of error control if the datagram is discarded or has some unknown
informationin the header.

FLOW CONTROL
 Flow control regulates the amount of data a source can send without
overwhelming the receiver.
 The network layer in the Internet, however, does not directly provide any
flowcontrol.
 The datagrams are sent by the sender when they are ready, without any
attention to the readiness of the receiver.
 Flow control is provided for most of the upper-layer protocols that use the
services of the network layer, so another level of flow control makes the
network layer more complicated and the whole system less efficient.

CONGESTION CONTROL
 Another issue in a network-layer protocol is congestion control.
 Congestion in the network layer is a situation in which too many datagrams
arepresent in an area of the Internet.
 Congestion may occur if the number of datagrams sent by source
computers isbeyond the capacity of the network or routers.
 In this situation, some routers may drop some of the datagrams.

SECURITY
 Another issue related to communication at the network layer is security.
 To provide security for a connectionless network layer, we need to have
another virtual level that changes the connectionless service to a
connection-oriented service. This virtual layer is called as called IPSec (IP
Security).

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 CS3591 – Computerwww.BrainKart.com
Networks Unit 3

2. PACKET SWITCHING
o The packet switching is a switching technique in which the message is sent in one
go, but it is divided into smaller pieces, and they are sent individually.
o The message splits into smaller pieces known as packets and packets are given a
unique number to identify their order at the receiving end.
o Every packet contains some information in its headers such as source address,
destination address and sequence number.
o Packets will travel across the network, taking the shortest path as possible.
o All the packets are reassembled at the receiving end in correct order.
o If any packet is missing or corrupted, then the message will be sent to resend the
message.
o If the correct order of the packets is reached, then the acknowledgment message
will be sent.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 CS3591 – Computerwww.BrainKart.com
Networks Unit 3

Advantages of Packet Switching:

o Cost-effective: In packet switching technique, switching devices do not require
massive secondary storage to store the packets, so cost is minimized to some
extent. Therefore, we can say that the packet switching technique is a cost-
effective technique.
o Reliable: If any node is busy, then the packets can be rerouted. This ensures that
the Packet Switching technique provides reliable communication.
o Efficient: Packet Switching is an efficient technique. It does not require any
established path prior to the transmission, and many users can use the same
communication channel simultaneously, hence makes use of available bandwidth
very efficiently.

Disadvantages of Packet Switching:

o Packet Switching technique cannot be implemented in those applications that
require low delay and high-quality services.
o The protocols used in a packet switching technique are very complex and requires
high implementation cost.
o If the network is overloaded or corrupted, then it requires retransmission of lost
packets. It can also lead to the loss of critical information if errors are nor
recovered.

APPROACHES OF PACKET SWITCHING

There are two approaches to Packet Switching:
o Datagram Packet switching
o Virtual Circuit Switching

Datagram Packet switching

o It is a packet switching technology in which packet is known as a datagram, is
considered as an independent entity.
o Each packet contains the information about the destination and switch uses this
information to forward the packet to the correct destination.
o The packets are reassembled at the receiving end in correct order.
o In Datagram Packet Switching technique, the path is not fixed.
o Intermediate nodes take the routing decisions to forward the packets.
o Datagram Packet Switching is also known as connectionless switching.
o There are no setup or teardown phases.
o Each packet is treated the same by a switch regardless of its source or destination.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 CS3591 – Computerwww.BrainKart.com
Networks Unit 3

In this example, all four packets (or datagrams) belong to the same message, but may travel
different paths to reach their destination.

Routing Table
In this type of network, each switch (or packet switch) has a routing table which is based on
the destination address. The routing tables are dynamic and are updated periodically. The
destination addresses and the corresponding forwarding output ports are recorded in the
tables.

Delay in a datagram network

 The packet travels through two switches.

 There are three transmission times (3T),three propagation delays (slopes 3t of the
lines), and two waiting times (w1 + w2).
 We ignore the processing time in each switch.
Total delay = 3T + 3t + w1 + w2

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 CS3591 – Computerwww.BrainKart.com
Networks Unit 3

4.IPV4 ADDRESSES
 The identifier used in the IP layer of the TCP/IP protocol suite to identify the
connection of each device to the Internet is called the Internet address or IP
address.
 Internet Protocol version 4 (IPv4) is the fourth version in the development of
the Internet Protocol (IP) and the first version of the protocol to be widely
deployed.
 IPv4 is described in IETF publication in September 1981.
 The IP address is the address of the connection, not the host or the router. An
IPv4 address is a 32-bit address that uniquely and universally defines the
connection .
 If the device is moved to another network, the IP address may be changed.
 IPv4 addresses are unique in the sense that each address defines one, and only
one, connection to the Internet.
 If a device has two connections to the Internet, via two networks, it has two
IPv4 addresses.
 Pv4 addresses are universal in the sense that the addressing system must be
accepted by any host that wants to be connected to the Internet.

IPV4 ADDRESS SPACE

 IPv4 defines addresses has an address space.
 An address space is the total number of addresses used by the protocol.
 If a protocol uses b bits to define an address, the address space is 2 b because
each bit can have two different values (0 or 1).
 IPv4 uses 32-bit addresses, which means that the address space is 2 32 or
4,294,967,296 (more than four billion).
 4 billion devices could be connected to the Internet.

IPV4 ADDRESS NOTATION

There are three common notations to show an IPv4 address:
(i) binary notation (base 2), (ii) dotted-decimal notation (base 256), and
(ii) hexadecimal notation (base 16).

In binary notation, an IPv4 address is displayed as 32 bits. To make the address more
readable, one or more spaces are usually inserted between bytes (8 bits).

In dotted-decimal notation,IPv4 addresses are usually written in decimal form with a

decimal point (dot) separating the bytes. Each number in the dotted-decimal notation
is between 0 and 255.

In hexadecimal notation, each hexadecimal digit is equivalent to four bits. This means

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 CS3591 – Computerwww.BrainKart.com
Networks Unit 3
that a 32-bit address has 8 hexadecimal digits. This notation is often used in network
programming.

HIERARCHY IN IPV4 ADDRESSING

 In any communication network that involves delivery, the addressing system is
hierarchical.
 A 32-bit IPv4 address is also hierarchical, but divided only into two parts.
 The first part of the address, called the prefix, defines the network(Net ID); the
second part of the address, called the suffix, defines the node (Host ID).
 The prefix length is n bits and the suffix length is (32- n) bits.

 A prefix can be fixed length or variable length.

 The network identifier in the IPv4 was first designed as a fixed-length prefix.
 This scheme is referred to as classful addressing.
 The new scheme, which is referred to as classless addressing, uses a variable-
length network prefix.

CATEGORIES OF IPV4 ADDRESSING

 There are two broad categories of IPv4 Addressing techniques.
 They are
 Classful Addressing
 Classless Addressing

CLASSFUL ADDRESSING
 An IPv4 address is 32-bit long(4 bytes).
 An IPv4 address is divided into sub-classes:

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 CS3591 – Computerwww.BrainKart.com
Networks Unit 3

Classful Network Architecture

Class A
 In Class A, an IP address is assigned to those networks that contain a large
number of hosts.
 The network ID is 8 bits long.
 The host ID is 24 bits long.
 In Class A, the first bit in higher order bits of the first octet is always set to 0
and the remaining 7 bits determine the network ID.
 The 24 bits determine the host ID in any network.
 The total number of networks in Class A = 2 7 = 128 network address
 The total number of hosts in Class A = 2 24 - 2 = 16,777,214 host address

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 CS3591 – Computerwww.BrainKart.com
Networks Unit 3

Class B
 In Class B, an IP address is assigned to those networks that range from small-
sized to large-sized networks.
 The Network ID is 16 bits long.
 The Host ID is 16 bits long.
 In Class B, the higher order bits of the first octet is always set to 10, and the
remaining14 bits determine the network ID.
 The other 16 bits determine the Host ID.
 The total number of networks in Class B = 2 14 = 16384 network address
 The total number of hosts in Class B = 2 16 - 2 = 65534 host address

Class C
 In Class C, an IP address is assigned to only small-sized networks.
 The Network ID is 24 bits long.
 The host ID is 8 bits long.
 In Class C, the higher order bits of the first octet is always set to 110, and the
remaining 21 bits determine the network ID.
 The 8 bits of the host ID determine the host in a network.
 The total number of networks = 2 21 = 2097152 network address
 The total number of hosts = 2 8 - 2 = 254 host address

Class D
 In Class D, an IP address is reserved for multicast addresses.
 It does not possess subnetting.
 The higher order bits of the first octet is always set to 1110, and the remaining
bits determines the host ID in any network.

Class E
 In Class E, an IP address is used for the future use or for the research and
development purposes.
 It does not possess any subnetting.
 The higher order bits of the first octet is always set to 1111, and the remaining
bits determines the host ID in any network.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 CS3591 – Computerwww.BrainKart.com
Networks Unit 3

Address Depletion in Classful Addressing

 The reason that classful addressing has become obsolete is address depletion.
 Since the addresses were not distributed properly, the Internet was faced with
the problem of the addresses being rapidly used up.
 This results in no more addresses available for organizations and individuals
that needed to be connected to the Internet.
 To understand the problem, let us think about class A.
 This class can be assigned to only 128 organizations in the world, but each
organization needs to have a single network with 16,777,216 nodes .
 Since there may be only a few organizations that are this large, most of the
addresses in this class were wasted (unused).
 Class B addresses were designed for midsize organizations, but many of the
addresses in this class also remained unused.
 Class C addresses have a completely different flaw in design. The number of
addresses that can be used in each network (256) was so small that most
companies were not comfortable using a block in this address class.
 Class E addresses were almost never used, wasting the whole class.

Advantage of Classful Addressing

 Although classful addressing had several problems and became obsolete, it had
one advantage.
 Given an address, we can easily find the class of the address and, since the
prefix length for each class is fixed, we can find the prefix length immediately.
 In other words, the prefix length in classful addressing is inherent in the
address; no extra information is needed to extract the prefix and the suffix.

Subnetting and Supernetting

 To alleviate address depletion, two strategies were proposed and implemented:
(i) Subnetting and (ii) Supernetting.

Subnetting
 In subnetting, a class A or class B block is divided into several subnets.
 Each subnet has a larger prefix length than the original network.
 For example, if a network in class A is divided into four subnets, each subnet
has a prefix of nsub = 10.
 At the same time, if all of the addresses in a network are not used, subnetting
allows the addresses to be divided among several organizations.

CLASSLESS ADDRESSING
 In 1996, the Internet authorities announced a new architecture called classless
addressing.
 In classless addressing, variable-length blocks are used that belong to no
classes.
 We can have a block of 1 address, 2 addresses, 4 addresses, 128 addresses, and
so on.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 CS3591 – Computerwww.BrainKart.com
Networks Unit 3

 In classless addressing, the whole address space is divided into variable length
blocks.
 The prefix in an address defines the block (network); the suffix defines the
node (device).
 Theoretically, we can have a block of 2 0, 21, 22, 32 addresses.

 The number of addresses in a block needs to be a power of 2. An organization

can be granted one block of addresses.

 The prefix length in classless addressing is variable.

 We can have a prefix length that ranges from 0 to 32.
 The size of the network is inversely proportional to the length of the prefix.
 A small prefix means a larger network; a large prefix means a smaller network.
 The idea of classless addressing can be easily applied to classful addressing.
 An address in class A can be thought of as a classless address in which the
prefix length is 8.
 An address in class B can be thought of as a classless address in which the
prefix is 16, and so on. In other words, classful addressing is a special case of
classless addressing.

Notation used in Classless Addressing

 The notation used in classless addressing is informally referred to as slash
notation and formally as classless interdomain routing or CIDR.

 For example , 192.168.100.14 /24 represents the IP address 192.168.100.14

and, its subnet mask 255.255.255.0, which has 24 leading 1-bits.

Address Aggregation
 One of the advantages of the CIDR strategy is address aggregation
(sometimes called address summarization or route summarization).
 When blocks of addresses are combined to create a larger block, routing can be
done based on the prefix of the larger block.
 ICANN assigns a large block of addresses to an ISP.
 Each ISP in turn divides its assigned block into smaller subblocks and grants
the subblocks to its customers.

Special Addresses in IPv4

 There are five special addresses that are used for special purposes:
this-host address, limited-broadcastaddress, loopback address,
private addresses, and multicast addresses.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 CS3591 – Computerwww.BrainKart.com
Networks Unit 3

This-host Address
 The only address in the block 0.0.0.0/32 is called the this-host address.
 It is used whenever a host needs to send an IP datagram but it does not know its
own address to use as the source address.

Limited-broadcast Address
 The only address in the block 255.255.255.255/32 is called the limited-
broadcast address.
 It is used whenever a router or a host needs to send a datagram to all devices in
a network.
 The routers in the network, however, block the packet having this address as
the destination;the packet cannot travel outside the network.

Loopback Address
 The block 127.0.0.0/8 is called the loopback address.
 A packet with one of the addresses in this block as the destination address
never leaves the host; it will remain in the host.

Private Addresses
 Four blocks are assigned as private addresses: 10.0.0.0/8, 172.16.0.0/12,
192.168.0.0/16, and 169.254.0.0/16.

Multicast Addresses
 The block 224.0.0.0/4 is reserved for multicast addresses.

5. DHCP – DYNAMIC HOST CONFIGURATION PROTOCOL

 The dynamic host configuration protocol is used to simplify the installation and
maintenance of networked computers.
 DHCP is derived from an earlier protocol called BOOTP.
 Ethernet addresses are configured into network by manufacturer and they are
unique.
 IP addresses must be unique on a given internetwork but also must reflect the
structure of the internetwork
 Most host Operating Systems provide a way to manually configure the IP
information for the host
 Drawbacks of manual configuration :
1. A lot of work to configure all the hosts in a large network
2. Configuration process is error-prune
 It is necessary to ensure that every host gets the correct network number and that
no two hosts receive the same IP address.
 For these reasons, automated configuration methods are required.
 The primary method uses a protocol known as the Dynamic Host Configuration
Protocol (DHCP).
 The main goal of DHCP is to minimize the amount of manual configuration
required for a host.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 CS3591 – Computerwww.BrainKart.com
Networks Unit 3

 If a new computer is connected to a network, DHCP can provide it with all the
necessary information for full system integration into the network.
 DHCP is based on a client/server model.
 DHCP clients send a request to a DHCP server to which the server responds with
an IP address
 DHCP server is responsible for providing configuration information to hosts.
 There is at least one DHCP server for an administrative domain.
 The DHCP server can function just as a centralized repository for host
configuration information.
 The DHCP server maintains a pool of available addresses that it hands out to hosts
on demand.

 A newly booted or attached host sends a DHCPDISCOVER message to a special IP

address (255.255.255.255., which is an IP broadcast address.
 This means it will be received by all hosts and routers on that network.
 DHCP uses the concept of a relay agent. There is at least one relay agent on each
network.
 DHCP relay agent is configured with the IP address of the DHCP server.
 When a relay agent receives a DHCPDISCOVER message, it unicasts it to the
DHCP server and awaits the response, which it will then send back to the
requesting client.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 CS3591 – Computerwww.BrainKart.com
Networks Unit 3

DHCP Message Format

 A DHCP packet is actually sent using a protocol called the User Datagram
Protocol (UDP).

ICMPV4 - INTERNET CONTROL MESSAGE PROTOCOL VERSION 4

 ICMP is a network-layer protocol.
 It is a companion to the IP protocol.
 Internet Control Message Protocol (ICMP) defines a collection of error
messages that are sent back to the source host whenever a router or host is
unable to process an IP datagram successfully.

ICMP MESSAGE TYPES

 ICMP messages are divided into two broad categories: error-reporting
messages and query messages.
 The error-reporting messages report problems that a router or a host
(destination) may encounter when it processes an IP packet.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 CS3591 – Computerwww.BrainKart.com
Networks Unit 3

 The query messages help a host or a network manager get specific information
from a router or another host.

ICMP Error – Reporting Messages

 Destination Unreachable―When a router cannot route a datagram, the datagram

is discarded and sends a destination unreachable message to source host.
 Source Quench―When a router or host discards a datagram due to congestion, it
sends a source-quench message to the source host. This message acts as flow
control.
 Time Exceeded―Router discards a datagram when TTL field becomes 0 and a
time exceeded message is sent to the source host.
 Parameter Problem―If a router discovers ambiguous or missing value in any
field of the datagram, it discards the datagram and sends parameter problem
message to source.
 Redirection―Redirect messages are sent by the default router to inform the source
host to update its forwarding table when the packet is routed on a wrong path.

ICMP Query Messages

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 CS3591 – Computerwww.BrainKart.com
Networks Unit 3

 Echo Request & Reply―Combination of echo request and reply messages

determines whether two systems communicate or not.
 Timestamp Request & Reply―Two machines can use the timestamp request
and reply messages to determine the round-trip time (RTT).
 Address Mask Request & Reply―A host to obtain its subnet mask, sends an
address mask request message to the router, which responds with an address
mask reply message.
 Router Solicitation/Advertisement―A host broadcasts a router solicitation
message to know about the router. Router broadcasts its routing information
with router advertisement message.

ICMP MESSAGE FORMAT

 An ICMP message has an 8-byte header and a variable-size data section.

Type Defines the type of the message

Code Specifies the reason for the particular message type
Checksum Used for error detection
Rest of the header Specific for each message type
Data Used to carry information
Identifier Used to match the request with the reply
Sequence Number Sequence Number of the ICMP packet

ICMP DEBUGGING TOOLS

Two tools are used for debugging purpose. They are (1) Ping (2) Traceroute

Ping
 The ping program is used to find if a host is alive and responding.
 The source host sends ICMP echo-request messages; the destination, if alive,
responds with ICMP echo-reply messages.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 CS3591 – Computerwww.BrainKart.com
Networks Unit 3

 The ping program sets the identifier field in the echo-request and echo-reply
message and starts the sequence number from 0; this number is incremented by
1 each time a new message is sent.
 The ping program can calculate the round-trip time.
 It inserts the sending time in the data section of the message.
 When the packet arrives, it subtracts the arrival time from the departure time to
get the round-trip time (RTT).
$ ping google.com

Traceroute or Tracert
 The traceroute program in UNIX or tracert in Windows can be used to trace
the path of a packet from a source to the destination.
 It can find the IP addresses of all the routers that are visited along the path.
 The program is usually set to check for the maximum of 30 hops (routers) to be
visited.
 The number of hops in the Internet is normally less than this.
$ traceroute google.com

FEATURES OF IPV6
1. Better header format - IPv6 uses a new header format in which options are
separated from the base header and inserted, when needed, between the base
header and the data. This simplifies and speeds up the routing process because
most of the options do not need to be checked by routers.
2. New options - IPv6 has new options to allow for additional functionalities.
3.Allowance for extension - IPv6 is designed to allow the extension of the
protocol if required by new technologies or applications.
4. Support for resource allocation - In IPv6, the type-of-service field has been
removed, but two new fields, traffic class and flow label, have been added to
enable the source to request special handling of the packet. This mechanism
can be used to support traffic such as real-time audio and video.

Additional Features :
1. Need to accommodate scalable routing and addressing
2. Support for real-time services
3. Security support
4.Autoconfiguration -
The ability of hosts to automatically configure themselves with such
information as their own IP address and domain name.
5. Enhanced routing functionality, including support for mobile hosts
6. Transition from ipv4 to ipv6

ADDRESS SPACE ALLOCATION OF IPV6

provides a 128-bit address space to handle up to 3.4 × 10 38 nodes.
uses classless addressing, but classification is based on MSBs.
address space is subdivided in various ways based on the leading bits.
current assignment of prefixes is listed in Table

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 CS3591 – Computerwww.BrainKart.com
Networks Unit 3

node may be assigned an “IPv4-compatible IPv6 address” by zero-extending

a 32-bit IPv4 addressto128 bits.

-
mapped IPv6 address” by prefixing the 32-bit IPv4 address with 2 bytes of all
1s and then zero-extending the result to 128 bits.
GLOBAL UNICAST
chunks (87%) of address space are left unassigned for future use.
IPv6 defines two types of local addresses for private networks.
oLink local - enables a host to construct an address that need not be
globally unique.
oSite local - allows valid local address for use in a isolated site with
several subnets.
Reserved addresses start with prefix of eight 0's.
oUnspecified address is used when a host does not know its address
oLoopback address is used for testing purposes before connecting
oCompatible address is used when IPv6 hosts uses IPv4 network
o Mapped address is used when a IPv6 host communicates with a IPv4 host
defines anycast address, assigned to a set of interfaces.
with anycast address is delivered to only one of the nearest interface.

ADDRESS NOTATION OF IPV6

x : x : x : x : x : x : x : x where x is a
16-bit hexadecimal address separated by colon (:).
For example,
47CD : 1234 : 4422 : ACO2 : 0022 : 1234 : A456 : 0124

address with contiguous 0 bytes can be written compactly.

For example,
47CD : 0000 : 0000 : 0000 : 0000 : 0000 : A456 : 0124 → 47CD : : A456 : 0124

address is mapped to IPv6 address by prefixing the 32-bit IPv4 address

with 2 bytes of 1s and then zero-extending the result to 128 bits.
For example,
128. 96.33.81 → : : FFFF : 128.96.33.81
This notation is called as CIDR notation or slash notation.

ADDRESS AGGREGATION OF IPV6

provides aggregation of routing information to reduce the burden on
routers.
is done by assigning prefixes at continental level.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 CS3591 – Computerwww.BrainKart.com
Networks Unit 3
example, if all addresses in Europe have a common prefix, then routers in
other continents would need one routing table entry for all networks in Europe.

 Prefix - All addresses in the same continent have a common prefix

 RegistryID ― identifies the continent
 ProviderID ― identifies the provider for Internet access, i.e., ISP.
 SubscriberID ― specifies the subscriber identifier

 SubnetID ― contains subnet of the subscriber.

 InterfaceID ―contains link level or physical address.

PACKET FORMAT OF IPV6

base header is 40 bytes long.

 Version — specifies the IP version, i.e., 6.

 Traffic Class — defines priority of the packet with respect to traffic
congestion. It is either congestion-controlled or non-congestion controlled
 Flow Label — provides special handling for a particular flow of data. Router
handles different flows with the help of a flow table.
 Payload Len — gives length of the packet, excluding IPv6 header.
 Next Header — Options are specified as a header following IP header.
NextHeader contains a pointer to optional headers.
 Hop Limit — Gives the TTL value of a packet.
 Source Address / Destination Address — 16-byte addresses of source and
destination host

Extension Headers
header provides greater functionality to IPv6.
header may be followed by six extension headers.
extension header contains a NextHeader field to identify the header
following it.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 CS3591 – Computerwww.BrainKart.com
Networks Unit 3
 Hop-by-Hop — source host passes information to all routers visited by the
packet
 Destination — source host information is passed to the destination only.
 Source Routing — routing information provided by the source host.
 Fragmentation — In IPv6, only the source host can fragment. Source uses a
path MTU discovery technique to find smallest MTU on the path.
 Authentication — used to validate the sender and ensures data integrity.
 ESP (Encrypted Security Payload) — provides confidentiality against
eavesdropping.
ADVANCED CAPABILITIES OF IPV6
Auto Configuration — Auto or stateless configuration of IP address to hosts
without the need for a DHCP server, i.e., plug and play.
Advanced Routing — Enhanced routing support for mobile hosts is provided.
Additional Functions ― Enhanced routing functionality with support formobile
hosts.
Security ― Encryption and authentication options provide confidentiality and
integrity.
Resource allocation ― Flow label enables the source to request specialhandling
of real-time audio and video packets

ADVANTAGES OF IPV6
Address space ― IPv6 uses 128-bit address whereas IPv4 uses 32-bit address.
Hence IPv6 has huge address space whereas IPv4 faces address shortage
problem.
Header format ― Unlike IPv4, optional headers are separated from base
header in IPv6. Each router thus need not process unwanted addition
information.
Extensible ― Unassigned IPv6 addresses can accommodate needs of future
technologies.

Dual-Stack Operation and Tunneling

dual-stack, nodes run both IPv6 and IPv4, uses Version field to decide which
stack should process an arriving packet.
packet is encapsulated with an IPv4 packet as it travels through an IPv4
network. This is known as tunneling and packet contains tunnel endpoint as its
destination address.

Network Address Translation

enables hosts on a network to use Internet with local addresses.
reserved for internal use range from 172.16.0.0 to 172.31.255.255
must have single connection to the Internet through a router that
runs the NAT software.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 CS3591 – Computerwww.BrainKart.com
Networks Unit 4

UNIT IV - Routing

Routing and protocols: Unicast routing - Distance Vector Routing -

RIP - Link State Routing – OSPF– Path-vector routing - BGP -
Multicast Routing: DVMRP – PIM.

UNICAST ROUTING
 Routing is the process of selecting best paths in a network.
 In unicast routing, a packet is routed, hop by hop, from its source to its
destination by the help of forwarding tables.
 Routing a packet from its source to its destination means routing the packet
from a source router (the default router of the source host) to a destination
router (the router connected to the destination network).
 The source host needs no forwarding table because it delivers its packet to the
default router in its local network.
 The destination host needs no forwarding table either because it receives the
packet from its default router in its local network.
 Only the intermediate routers in the networks need forwarding tables.

NETWORK AS A GRAPH
 The Figure below shows a graph representing a network.

 The nodes of the graph, labeled A through G, may be hosts, switches, routers,
or networks.
 The edges of the graph correspond to the network links.
 Each edge has an associated cost.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 CS3591 – Computerwww.BrainKart.com
Networks Unit 4

 The basic problem of routing is to find the lowest-cost path between any two
nodes, where the cost of a path equals the sum of the costs of all the edges that
make up the path.
 This static approach has several problems:
 It does not deal with node or link failures.
 It does not consider the addition of new nodes or links.
 It implies that edge costs cannot change.
 For these reasons, routing is achieved by running routing protocols among the
nodes.
 These protocols provide a distributed, dynamic way to solve the problem of
finding the lowest-cost path in the presence of link and node failures and
changing edge costs.

UNICAST ROUTING ALGORITHMS

 There are three main classes of routing protocols:
1) Distance Vector Routing Algorithm – Routing Information Protocol
2) Link State Routing Algorithm – Open Shortest Path First Protocol
3) Path-Vector Routing Algorithm - Border Gateway Protocol

DISTANCE VECTOR ROUTING (DSR)

ROUTING INFORMATION PROTOCOL (RIP)
BELLMAN - FORD ALGORITHM
 Distance vector routing is distributed, i.e., algorithm is run on all nodes.
 Each node knows the distance (cost) to each of its directly connected neighbors.
 Nodes construct a vector (Destination, Cost, NextHop) and distributes to its
neighbors.
 Nodes compute routing table of minimum distance to every other node via
NextHop using information obtained from its neighbors.

Initial State

 In given network, cost of each link is 1 hop.

 Each node sets a distance of 1 (hop) to its immediate neighbor and
cost to itself as 0.
 Distance for non-neighbors is marked as unreachable with value ∞ (infinity).
 For node A, nodes B, C, E and F are reachable, whereas nodes D and G
are unreachable.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 CS3591 – Computerwww.BrainKart.com
Networks Unit 4

 The initial table for all the nodes are given below

 Each node sends its initial table (distance vector) to neighbors and receives
their estimate.
 Node A sends its table to nodes B, C, E & F and receives tables from nodes B,
C, E & F.
 Each node updates its routing table by comparing with each of its neighbor's
table
 For each destination, Total Cost is computed as:
 Total Cost = Cost (Node to Neighbor) + Cost (Neighbor to Destination)
 If Total Cost < Cost then
 Cost = Total Cost and NextHop = Neighbor
 Node A learns from C's table to reach node D and from F's table to reach
node G.
 Total Cost to reach node D via C = Cost (A to C) + Cost(C to D)
Cost = 1 + 1 = 2.
 Since 2 < ∞, entry for destination D in A's table is changed to (D, 2, C)
 Total Cost to reach node G via F = Cost(A to F) + Cost(F to G) = 1 + 1 = 2
 Since 2 < ∞, entry for destination G in A's table is changed to (G, 2, F)
 Each node builds complete routing table after few exchanges amongst its
neighbors.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 CS3591 – Computerwww.BrainKart.com
Networks Unit 4

 System stabilizes when all nodes have complete routing information, i.e.,
convergence.
 Routing tables are exchanged periodically or in case of triggered update.
 The final distances stored at each node is given below:

Updation of Routing Tables

There are two different circumstances under which a given node decides to send a
routing update to its neighbors.

Periodic Update
 In this case, each node automatically sends an update message every so often,
even if nothing has changed.
 The frequency of these periodic updates varies from protocol to protocol, but
it is typically on the order of several seconds to several minutes.

Triggered Update
 In this case, whenever a node notices a link failure or receives an update from
one of its neighbors that causes it to change one of the routes in its routing
table.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 CS3591 – Computerwww.BrainKart.com
Networks Unit 4

 Whenever a node’s routing table changes, it sends an update to its neighbors,

which may lead to a change in their tables, causing them to send an update to
their neighbors.

ROUTING INFORMATION PROTOCOL (RIP)

 RIP is an intra-domain routing protocol based on distance-vector algorithm.
Example

 Routers advertise the cost of reaching networks. Cost of reaching each link is 1
hop. For example, router C advertises to A that it can reach network 2, 3 at cost
0 (directly connected), networks 5, 6 at cost 1 and network 4 at cost 2.
 Each router updates cost and next hop for each network number.
 Infinity is defined as 16, i.e., any route cannot have more than 15 hops.
Therefore RIP can be implemented on small-sized networks only.
 Advertisements are sent every 30 seconds or in case of triggered update.

 Command - It indicates the packet type.

Value 1 represents a request packet. Value 2 represents a response packet.
 Version - It indicates the RIP version number. For RIPv1, the value is 0x01.
 Address Family Identifier - When the value is 2, it represents the IP protocol.
 IP Address - It indicates the destination IP address of the route. It can be the
addresses of only the natural network segment.
 Metric - It indicates the hop count of a route to its destination.

Count-To-Infinity (or) Loop Instability Problem

 Suppose link from node A to E goes down.
 Node A advertises a distance of ∞ to E to its neighbors
 Node B receives periodic update from C before A’s update
reaches B
 Node B updated by C, concludes that E can be reached in 3 hops via C
 Node B advertises to A as 3 hops to reach E

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 CS3591 – Computerwww.BrainKart.com
Networks Unit 4

 Node A in turn updates C with a distance of 4 hops to E and so on

 Thus nodes update each other until cost to E reaches infinity, i.e., no
convergence.
 Routing table does not stabilize.
 This problem is called loop instability or count to infinity

Solution to Count-To-Infinity (or) Loop Instability Problem :

 Infinity is redefined to a small number, say 16.
 Distance between any two nodes can be 15 hops maximum. Thus distance
vector routing cannot be used in large networks.
 When a node updates its neighbors, it does not send those routes it learned
from each neighbor back to that neighbor. This is known as split horizon.
 Split horizon with poison reverse allows nodes to advertise routes it learnt
from a node back to that node, but with a warning message.

LINK STATE ROUTING (LSR)

OPEN SHORTEST PATH PROTOCOL (OSPF)
DIJKSTRA’S ALGORITHM
 Each node knows state of link to its neighbors and cost.
 Nodes create an update packet called link-state packet (LSP) that contains:
 ID of the node
 List of neighbors for that node and associated cost
 64-bit Sequence number
 Time to live
 Link-State routing protocols rely on two mechanisms:
 Reliable flooding of link-state information to all other nodes
 Route calculation from the accumulated link-state knowledge

Reliable Flooding
 Each node sends its LSP out on each of its directly connected links.
 When a node receives LSP of another node, checks if it has an LSP already for
that node.
 If not, it stores and forwards the LSP on all other links except the incoming
one.
 Else if the received LSP has a bigger sequence number, then it is stored and
forwarded. Older LSP for that node is discarded.
 Otherwise discard the received LSP, since it is not latest for that node.
 Thus recent LSP of a node eventually reaches all nodes, i.e., reliable flooding.

(a) (b) (c) (d)

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 CS3591 – Computerwww.BrainKart.com
Networks Unit 4

 Flooding of LSP in a small network is as follows:

 When node X receives Y’s LSP (fig a), it floods onto its neighbors A
and C (fig b)
 Nodes A and C forward it to B, but does not sends it back to X (fig c).
 Node B receives two copies of LSP with same sequence number.
 Accepts one LSP and forwards it to D (fig d). Flooding is complete.
 LSP is generated either periodically or when there is a change in the topology.

Route Calculation
 Each node knows the entire topology, once it has LSP from every other node.
 Forward search algorithm is used to compute routing table from the received
LSPs.
 Each node maintains two lists, namely Tentative and Confirmed with entries of
the form (Destination, Cost, NextHop).

DIJKSTRA’S SHORTEST PATH ALGORITHM

(FORWARD SEARCH ALGORITHM)
1. Each host maintains two lists, known as Tentative and Confirmed
2. Initialize the Confirmed list with an entry for the Node (Cost = 0).
3. Node just added to Confirmed list is called Next. Its LSP is examined.
4. For each neighbor of Next, calculate cost to reach each neighbor as Cost (Node
to Next) + Cost (Next to Neighbor).
a. If Neighbor is neither in Confirmed nor in Tentative list, then add
(Neighbor, Cost, NextHop) to Tentative list.
b. If Neighbor is in Tentative list, and Cost is less than existing cost, then
replace the entry with (Neighbor, Cost, NextHop).
5. If Tentative list is empty then Stop, otherwise move least cost entry from
Tentative list to Confirmed list. Go to Step 2.

Example :

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 CS3591 – Computerwww.BrainKart.com
Networks Unit 4

OPEN SHORTEST PATH FIRST PROTOCOL (OSPF)

 OSPF is a non-proprietary widely used link-state routing protocol.
 OSPF Features are:
 Authentication―Malicious host can collapse a network by advertising
to reach every host with cost 0. Such disasters are averted by
authenticating routing updates.
 Additional hierarchy―Domain is partitioned into areas, i.e., OSPF is
more scalable.
 Load balancing―Multiple routes to the same place are assigned same
cost. Thus traffic is distributed evenly.

Link State Packet Format

Version ― represents the current version, i.e., 2.

Type ― represents the type (1–5) of OSPF message.
Type 1 - ―hello‖ message, Type 2 - request, Type 3 – send ,
Type 4 - acknowledge the receipt of link state messages ,
Type 5 - reserved
SourceAddr ― identifies the sender
AreaId ― 32-bit identifier of the area in which the node is located
Checksum ― 16-bit internet checksum
Authentication type ― 1 (simple password), 2 (cryptographic authentication).
Authentication ― contains password or cryptographic checksum

Difference Between Distance-Vector And Link-State Algorithms

Distance vector Routing Link state Routing

Each node talks only to its directly Each node talks to all other nodes, but it
connected neighbors, but it tells them tells them only what it knows for sure
everything it has learned (i.e., only the state of its directly
(i.e., distance to all nodes). connected links).

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 CS3591 – Computerwww.BrainKart.com
Networks Unit 4

PATH VECTOR ROUTING (PVR)

BORDER GATEWAY PROTOCOL (BGP)
 Path-vector routing is an asynchronous and distributed routing algorithm.
 The Path-vector routing is not based on least-cost routing.
 The best route is determined by the source using the policy it imposes on the
route.
 In other words, the source can control the path.
 Path-vector routing is not actually used in an internet, and is mostly designed to
route a packet between ISPs.

Spanning Trees
 In path-vector routing, the path from a source to all destinations is determined
by the best spanning tree.
 The best spanning tree is not the least-cost tree.
 It is the tree determined by the source when it imposes its own policy.
 If there is more than one route to a destination, the source can choose the route
that meets its policy best.
 A source may apply several policies at the same time.
 One of the common policies uses the minimum number of nodes to be visited.
Another common policy is to avoid some nodes as the middle node in a route.
 The spanning trees are made, gradually and asynchronously, by each node.
When a node is booted, it creates a path vector based on the information it can
obtain about its immediate neighbor.
 A node sends greeting messages to its immediate neighbors to collect these
pieces of information.
 Each node, after the creation of the initial path vector, sends it to all its
immediate neighbors.
 Each node, when it receives a path vector from a neighbor, updates its path
vector using the formula

 The policy is defined by selecting the best of multiple paths.

 Path-vector routing also imposes one more condition on this equation.
 If Path (v, y) includes x, that path is discarded to avoid a loop in the path.
 In other words, x does not want to visit itself when it selects a path to y.

Example:
 The Figure below shows a small internet with only five nodes.
 Each source has created its own spanning tree that meets its policy.
 The policy imposed by all sources is to use the minimum number of nodes to
reach a destination.
 The spanning tree selected by A and E is such that the communication does not
pass through D as a middle node.
 Similarly, the spanning tree selected by B is such that the communication does
not pass through C as a middle node.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 CS3591 – Computerwww.BrainKart.com
Networks Unit 4

Path Vectors made at booting time

 The Figure below shows all of these path vectors for the example.
 Not all of these tables are created simultaneously.
 They are created when each node is booted.
 The figure also shows how these path vectors are sent to immediate neighbors
after they have been created.

Updating Path Vectors

 The Figure below shows the path vector of node C after two events.
 In the first event, node C receives a copy of B’s vector, which improves its
vector: now it knows how to reach node A.
 In the second event, node C receives a copy of D’s vector, which does not
change its vector.
 The vector for node C after the first event is stabilized and serves as its
forwarding table.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 CS3591 – Computerwww.BrainKart.com
Networks Unit 4

BORDER GATEWAY PROTOCOL (BGP)

 The Border Gateway Protocol version (BGP) is the only interdomain routing
protocol used in the Internet today.
 BGP4 is based on the path-vector algorithm. It provides information about the
reachability of networks in the Internet.
 BGP views internet as a set of autonomous systems interconnected
arbitrarily.

 Each AS have a border router (gateway), by which packets enter and leave that
AS. In above figure, R3 and R4 are border routers.
 One of the router in each autonomous system is designated as BGP speaker.
 BGP Speaker exchange reachability information with other BGP speakers,
known as external BGP session.
 BGP advertises complete path as enumerated list of AS (path vector) to reach a
particular network.
 Paths must be without any loop, i.e., AS list is unique.
 For example, backbone network advertises that networks 128.96 and 192.4.153
can be reached along the path <AS1, AS2, AS4>.

 If there are multiple routes to a destination, BGP speaker chooses one based on
policy.
 Speakers need not advertise any route to a destination, even if one exists.
 Advertised paths can be cancelled, if a link/node on the path goes down. This
negative advertisement is known as withdrawn route.
 Routes are not repeatedly sent. If there is no change, keep alive messages are
sent.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 CS3591 – Computerwww.BrainKart.com
Networks Unit 4

iBGP - interior BGP

 A Variant of BGP
 Used by routers to update routing information learnt from other speakers to
routers inside the autonomous system.
 Each router in the AS is able to determine the appropriate next hop for all
prefixes.

UNICAST ROUTING PROTOCOLS

 A protocol is more than an algorithm.

 A protocol needs to define its domain of operation, the messages exchanged,
communication between routers, and interaction with protocols in other
domains.
 A routing protocol specifies how routers communicate with each other,
distributing information that enables them to select routes between any
two nodes on a computer network.
 Routers perform the "traffic directing" functions on the Internet; data
packets are forwarded through the networks of the internet from router to router
until they reach their destination computer.
 Routing algorithms determine the specific choice of route.
 Each router has a prior knowledge only of networks attached to it directly.
 A routing protocol shares this information first among immediate neighbors,
and then throughout the network. This way, routers gain knowledge of the
topology of the network.
 The ability of routing protocols to dynamically adjust to changing conditions
such as disabled data lines and computers and route data around obstructions is
what gives the Internet its survivability and reliability.
 The specific characteristics of routing protocols include the manner in which
they avoid routing loops, the manner in which they select preferred routes,
using information about hop costs, the time they require to reach routing
convergence, their scalability, and other factors.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 CS3591 – Computerwww.BrainKart.com
Networks Unit 4

INTERNET STRUCTURE
 Internet has a million networks. Routing table entries per router should be
minimized.
 Link state routing protocol is used to partition domain into areas.
 An routing area is a set of routers configured to exchange link-state
information.
 Area introduces an additional level of hierarchy.
 Thus domains can grow without burdening routing protocols.

 There is one special area—the backbone area, also known as area 0.

 Routers R1, R2 and R3 are part of backbone area.
 Routers in backbone area are also part of non-backbone areas. Such routers are
known as Area Border Routers (ABR).
 Link-state advertisement is exchanged amongst routers in a non-backbone area.
 They do not see LSAs of other areas. For example, area 1 routers are not aware
of area 3 routers.
 ABR advertises routing information in their area to other ABRs.
 For example,R2 advertises area 2 routing information to R1 and R3, which in
turn pass onto their areas.
 All routers learn how to reach all networks in the domain.
 When a packet is to be sent to a network in another area, it goes through
backbone area via ABR and reaches the destination area.
 Routing Areas improve scalability but packets may not travel on the shortest
path.

INTER DOMAIN ROUTING

 Internet is organized as autonomous systems (AS) each of which is under the
control of a single administrative entity.
 A corporation’s complex internal network might be a single AS, as may the
network of a single Internet Service Provider (ISP).
 Interdomain routing shares reachability information between autonomous
systems.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 CS3591 – Computerwww.BrainKart.com
Networks Unit 4

 The basic idea behind autonomous systems is to provide an additional way to

hierarchically aggregate routing information in a large internet, thus improving
scalability.
 Internet has backbone networks and sites. Providers connect at a peering point.

Traffic on the internet is of two types:

 Local Traffic - Traffic within an autonomous system is called local.
 Transit Traffic - Traffic that passes through an autonomous system is called
transit.

Autonomous Systems (AS) are classified as:

 Stub AS - is connected to only one another autonomous system and carries
local traffic only (e.g. Small corporation).
 Multihomed AS - has connections to multiple autonomous systems but refuses
to carry transit traffic (e.g. Large corporation).
 Transit AS - has connections to multiple autonomous systems and is designed
to carry transit traffic (e.g. Backbone service provider).

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 CS3591 – Computerwww.BrainKart.com
Networks Unit 4

Policies Used By Autonomous Systems :

 Provider-Customer―Provider advertises the routes it knows, to the customer
and advertises the routes learnt from customer to everyone.
 Customer-Provider―Customers want the routes to be diverted to them. So
they advertise their own prefixes and routes learned from customers to provider
and advertise routes learned from provider to customers.
 Peer―Two providers access to each other’s customers without having to pay.

CHALLENGES IN INTER-DOMAIN ROUTING PROTOCOL

 Each autonomous system has an intra-domain routing protocol, its own policy
and metric.
 Internet backbone must be able to route packets to the destination that complies
with policies of autonomous system along a loopless path.
 Service providers have trust deficit and may not trust advertisements by other
AS, or may refuse to carry traffic from other AS.

TYPES OF ROUTING PROTOCOLS

Two types of Routing Protocols are used in the Internet:

1) Intradomain routing
 Routing within a single autonomous system
 Routing Information Protocol (RIP) - based on the distance-vector
algorithm - (REFER distance-vector routing algorithm)
 Open Shortest Path First (OSPF) - based on the link-state algorithm -
(REFER link-state routing algorithm)
2) Interdomain routing
 Routing between autonomous systems.
 Border Gateway Protocol (BGP) - based on the path-vector algorithm -
(REFER Path Vector routing algorithm)

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 CS3591 – Computerwww.BrainKart.com
Networks Unit 4

MULTICASTING
 In multicasting, there is one source and a group of destinations.
 Multicast supports efficient delivery to multiple destinations.
 The relationship is one to many or many-to-many.
 One-to-Many (Source Specific Multicast)
oRadio station broadcast
oTransmitting news, stock-price
oSoftware updates to multiple hosts
 Many-to-Many (Any Source Multicast)
oMultimedia teleconferencing
oOnline multi-player games
oDistributed simulations
 In this type of communication, the source address is a unicast address, but the
destination address is a group address.
 The group address defines the members of the group.

 In multicasting, a multicast router may have to send out copies of the same
datagram through more than one interface.
 Hosts that are members of a group receive copies of any packets sent to that
group’s multicast address
 A host can be in multiple groups
 A host can join and leave groups
 A host signals its desire to join or leave a multicast group by
communicating with its local router using a special protocol.
 In IPv4, the protocol is Internet Group Management Protocol (IGMP)
 In IPv6, the protocol is Multicast Listener Discovery (MLD)

IGMP OR MLD PROTOCOL

 Hosts communicate their desire to join / leave a multicast group to a router
using Internet Group Message Protocol (IGMP) in IPv4 or Multicast
Listener Discovery (MLD) in IPv6.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 CS3591 – Computerwww.BrainKart.com
Networks Unit 4

 Provides multicast routers with information about the membership status of

hosts connected to the network.
 Enables a multicast router to create and update list of loyal members for
each group.

MULTICAST ADDRESSING
 Multicast address is associated with a group, whose members are dynamic.
 Each group has its own IP multicast address.
 IP addresses reserved for multicasting are Class D in IPv4 (Class D 224.0.0.1
to 239.255.255.255), 1111 1111 prefix in IPv6.
o
 Hosts that are members of a group receive copy of the packet sent when
destination contains group address.

MULTICASTING VERSUS MULTIPLE UNICASTING

 Multicasting starts with a single packet from the source that is duplicated by
the routers. The destination address in each packet is the same for all
duplicates.
 Only a single copy of the packet travels between any two routers.

 In multiple unicasting, several packets start from the source.

 If there are three destinations, for example, the source sends three packets, each
with a different unicast destination address.
 There may be multiple copies traveling between two routers

NEED FOR MULTICAST

Without support for multicast
 A source needs to send a separate packet with the identical data to each
member of the group
 Source needs to keep track of the IP address of each member in the group

Using IP multicast
 Sending host does not send multiple copies of the packet
 A host sends a single copy of the packet addressed to the group’s multicast
address
 The sending host does not need to know the individual unicast IP address of
each member

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 CS3591 – Computerwww.BrainKart.com
Networks Unit 4

TYPES OF MULTICASTING
 Source-Specific Multicast - In source-specific multicast (one-to-many model),
receiver specifies multicast group and sender from which it is interested to
receive packets. Example: Internet radio broadcasts.

 Any Source Multicast - Supplements any source multicast (many-to-many

model).

MULTICAST APPLICATIONS
 Access to Distributed Databases
 Information Dissemination
 Teleconferencing.
 Distance Learning

MULTICAST ROUTING
 To support multicast, a router must additionally have multicast forwarding
tables that indicate, based on multicast address, which links to use to
forward the multicast packet.
 Unicast forwarding tables collectively specify a set of paths.
 Multicast forwarding tables collectively specify a set of trees -Multicast
distribution trees.
 Multicast routing is the process by which multicast distribution trees are
determined.
 To support multicasting, routers additionally build multicast forwarding
tables.
 Multicast forwarding table is a tree structure, known as multicast
distribution trees.
 Internet multicast is implemented on physical networks that support
broadcasting by extending forwarding functions.

MULTICAST DISTRIBUTION TREES

There are two types of Multicast Distribution Trees used in multicast routing.
They are
 Source-Based Tree: (DVMRP)
 For each combination of (source , group), there is a shortest path spanning
tree.
 Flood and prune
 Send multicast traffic everywhere
 Prune edges that are not actively subscribed to group
 Link-state
 Routers flood groups they would like to receive
 Compute shortest-path trees on demand
 Shared Tree (PIM)
 Single distributed tree shared among all sources
 Does not include its own topology discovery mechanism, but instead
uses routing information supplied by other routing protocols
 Specify rendezvous point (RP) for group
 Senders send packets to RP, receivers join at RP

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 CS3591 – Computerwww.BrainKart.com
Networks Unit 4

 RP multicasts to receivers; Fix-up tree for optimization

 Rendezvous-Point Tree: one router is the center of the group and
therefore the root of the tree.

MULTICAST ROUTING PROTOCOLS

 Internet multicast is implemented on physical networks that support
broadcasting by extending forwarding functions.
 Major multicast routing protocols are:
1. Distance-Vector Multicast Routing Protocol (DVMRP)
2. Protocol Independent Multicast (PIM)

1. Distance Vector Multicast Routing Protocol

 The DVMRP, is a routing protocol used to share information
between routers to facilitate the transportation of IP multicast packets among
networks.
 It formed the basis of the Internet's historic multicast backbone.
 Distance vector routing for unicast is extended to support multicast routing.
 Each router maintains a routing table for all destination through exchange of
distance vectors.
 DVMRP is also known as flood-and-prune protocol.
 DVMRP consists of two major components:
 A conventional distance-vector routing protocol, like RIP
 A protocol for determining how to forward multicast packets, based on the
routing table
 DVMRP router forwards a packet if
 The packet arrived from the link used to reach the source of the packet
 If downstream links have not pruned the tree
 DVMRP protocol uses the basic packet types as follows:

 The forwarding table of DVMRP is as follows:

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 CS3591 – Computerwww.BrainKart.com
Networks Unit 4

 Multicasting is added to distance-vector routing in four stages.

 Flooding
 Reverse Path Forwarding (RPF)
 Reverse Path Broadcasting (RPB)
 Reverse Path Multicast (RPM)
Flooding
on receiving a multicast packet from source S to a Destination fromNextHop,
forwards the packet on all out-going links.
is flooded and looped back to S.
drawbacks are:
o It floods a network, even if it has no members for that group.
o Packets are forwarded by each router connected to a LAN, i.e., duplicate
flooding

Reverse Path Forwarding (RPF)

eliminates the looping problem in the flooding process.
one copy is forwarded and the other copies are discarded.
the router to forward a multicast packet from one specific interface:
the one which has come through the shortest path from the source to the router.
is flooded but not looped back to S.

Reverse-Path Broadcasting (RPB)

does not multicast the packet, it broadcasts it.
creates a shortest path broadcast tree from the source to each destination.
guarantees that each destination receives one and only one copy of the
packet.
need to prevent each network from receiving more than one copy of the
packet.
a network is connected to more than one router, it may receive a copy of the
packet from each router.
router identified as parent called designated Router (DR).
parent router forwards multicast packets from source S to the attached
network.
a router that is not the parent of the attached network receives a multicast
packet, it simply drops the packet.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 CS3591 – Computerwww.BrainKart.com
Networks Unit 4

Reverse-Path Multicasting (RPM)

increase efficiency, the multicast packet must reach only those networks
that have active members for that particular group.
adds pruning and grafting to RPB to create a multicast shortest path tree
that supports dynamic membership changes.

Pruning:
 Sent from routers receiving multicast traffic for which they have no active

group members
 ―Prunes‖ the tree created by DVMRP

 Stops needless data from being sent

Grafting:
 Used after a branch has been pruned back

 Sent by a router that has a host that joins a multicast group

 Goes from router to router until a router active on the multicast group is

reached
 Sent for the following cases

 A new host member joins a group

A new dependent router joins a pruned branch
A dependent router restarts on a pruned branch

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 CS3591 – Computerwww.BrainKart.com
Networks Unit 4

2. Protocol Independent Multicast (PIM)

divides multicast routing problem into sparse and dense mode.
sparse mode (PIM-SM) is widely used.
does not rely on any type of unicast routing protocol, hence protocol
independent.
explicitly join and leave multicast group using Join and Prune
messages.
of the router is designated as rendezvous point (RP) for each group in a
domain to receive PIM messages.
forwarding tree is built as a result of routers sending Join messages
to RP.
types of trees to be constructed:
 Shared tree - used by all senders
 Source-specific tree - used only by a specific sending host
normal mode of operation creates the shared tree first, followed by one or
more source-specific trees

Shared Tree
a router sends Join message for group G to RP, it goes through a setof
routers.
message is wildcarded (*), i.e., it is applicable to all senders.
create an entry (*, G) in its forwarding table for the shared tree.
Interface on which the Join arrived is marked to forward packets for that
group.
Forwards Join towards rendezvous router RP.
the message arrives at RP. Thus a shared tree with RP as root is
formed.

Example
R4 sends Join message for group G to rendezvous router RP.
message is received by router R2. It makes an entry (*, G) in its table and
forwards the message to RP.
R5 sends Join message for group G, R2 does not forwards the Join. It
adds an outgoing interface to the forwarding table created for that group.

routers send Join message for a group, branches are added to the tree, i.e.,
shared.
packets sent from hosts are forwarded to designated router RP.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 CS3591 – Computerwww.BrainKart.com
Networks Unit 4

router R1, receives a message to group G.

oR1 has no state for group G.
o Encapsulates the multicast packet in a Register message.
o Multicast packet is tunneled along the way to RP.
decapsulates the packet and sends multicast packet onto the shared tree,
towards R2.
R2 forwards the multicast packet to routers R4 and R5 that have members for
group G.

Source-Specific Tree
force routers to know about group G, by sending Join message to the
sending host, so that tunneling can be avoided.
routers create sender-specific entry (S, G) in their tables. Thus
a source-specific route from R1 to RP is formed.
there is high rate of packets sent from a sender to a group G, then shared-
tree is replaced by source-specific tree with sender as root.

Example

router RP sends a Join message to the host router R1.

R3 learns about group G through the message sent by RP.
R4 send a source-specific Join due to high rate of packets from sender.
R2 learns about group G through the message sent by R4.
a source-specific tree is formed with R1 as root.

Analysis of PIM
independent because, tree is based on Join messages via shortest path.
trees are more scalable than source-specific trees.
-specific trees enable efficient routing than shared trees.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com

CS 3591 - Computer Networks Unit 5

UNIT V : DATA-LINK LAYER & PHYSICAL LAYER

Data Link Layer – Framing – Flow control – Error control – Data-Link Layer Protocols
– HDLC –PPP - Media Access Control – Ethernet Basics – CSMA/CD – Virtual LAN –
Wireless LAN(802.11) - Physical Layer: Data and Signals - Performance – Transmission
media- Switching –Circuit Switching.

1. INTRODUCTION
 In the OSI model, the data link layer is the 2nd layer from the bottom.
 It is responsible for transmitting frames from one node to next node.
 The main responsibility of the Data Link Layer is to transfer the datagram
across an individual link.
 An important characteristic of a Data Link Layer is that datagram can be
handled by different link layer protocols on different links in a path.
 The other responsibilities of this layer are
o Framing - Divides the stream of bits received into data units called
frames.
o Physical addressing – If frames are to be distributed to different
systems on the same network, data link layer adds a header to the
frame to define the sender and receiver.
o Flow control- If the rate at which the data are absorbed by the
receiver is less than the rate produced in the sender ,the Data link
layer imposes a flow control mechanism.
o Error control- Used for detecting and retransmitting damaged or
lost frames and to prevent duplication of frames. This is achieved
through a trailer added at the end of the frame.
o Medium Access control - Used to determine which device has
control over the link at any given time.

Nodes and Links

 Communication at the data-link layer is node-to-node.
 The communication channel that connects the adjacent nodes is known as
links, and in order to move the datagram from source to the destination, the
datagram must be moved across an individual link.
 A data unit from one point in the Internet needs to pass through many
networks (LAN and WAN) to reach another point.
 Theses LANs and WANs are connected by routers.
 The two end hosts and the routers are nodes and the networks in- between
are links.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com

CS 3591 - Computer Networks Unit 5

 The first node is the source host; the last node is the destination host.
 The other four nodes are four routers.
 The first, the third, and the fifth links represent the three LANs; the second
and the fourth links represent the two WANs.

Two Categories of Links

Point- to-Point link and Broadcast link.
 In a point-to-point link, the link is dedicated to the two devices
 In a broadcast link, the link is shared between several pairs of devices.

Data Link Layer Services

 The data-link layer is located between the physical and the network layers.
 The datalink layer provides services to the network layer; it receives
services from the physical layer.
 When a packet is travelling, the data-link layer of a node (host or router) is
responsible for delivering a datagram to the next node in the path.
 For this purpose, the data-link layer of the sending node needs to
encapsulate the datagram and the data-link layer of the receiving node
needs to decapsulate the datagram.

 The datagram received by the data-link layer of the source host is

encapsulated in a frame.
 The frame is logically transported from the source host to the router.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com

CS 3591 - Computer Networks Unit 5

 The frame is decapsulated at the data-link layer of the router and

encapsulated at another frame.
 The new frame is logically transported from the router to the destination
host.

Sublayers in Data Link layer

 We can divide the data-link layer into two sublayers: data link control
(DLC) and media access control (MAC).
 The data link control sublayer deals with all issues common to both point-
to-point and broadcast links
 The media access control sublayer deals only with issues specific to
broadcast links.

2. LINK-LAYER ADDRESSING
 A link-layer address is sometimes called a link address, sometimes a
physical address, and sometimes a MAC address.
 Since a link is controlled at the data-link layer, the addresses need to belong
to the data-link layer.
 When a datagram passes from the network layer to the data-link layer, the
datagram will be encapsulated in a frame and two data-link addresses are
added to the frame header.
 These two addresses are changed every time the frame moves from one link
to another.

THREE TYPES OF ADDRESSES

The link-layer protocols define three types of addresses: unicast, multicast, and
broadcast.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com

CS 3591 - Computer Networks Unit 5

Unicast Address :
Each host or each interface of a router is assigned a unicast address.
Unicasting means one-to-one communication. A frame with a unicast
address destination is destined only for one entity in the link.

Multicast Address :
Link-layer protocols define multicast addresses. Multicasting means one-to-
many Communication but not all.

Broadcast Address :
Link-layer protocols define a broadcast address. Broadcasting means one-
to-all communication. A frame with a destination broadcast address is sent
to all entities in the link.

ADDRESS RESOLUTION PROTOCOL (ARP)

o ARP stands for Address Resolution Protocol.
o ARP is the most important protocol of the Data Link Layer.
o ARP is a network layer protocol used to convert a IP address
(Network/Logical address) into a MAC Address (Hardware /Physical
address).

o The computer programs/applications use logical address (IP address) to

send/receive messages, however the actual communication happens over
the physical address (MAC address).
o To send a datagram over a network, we need both the logical and physical
address.
o IP addresses are made up of 32 bits whereas MAC addresses are made up of
48 bits.
o ARP enables each host to build a table of IP address and corresponding
physical address.
o ARP relies on broadcast support from physical networks.
o The Address Resolution Protocol is a request and response protocol.
o The types of ARP messages are:
1. ARP request
2. ARP reply

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com

CS 3591 - Computer Networks Unit 5

ARP Operation
o ARP maintains a cache table in which MAC addresses are mapped to IP
addresses.
o If a host wants to send an IP datagram to a host,it first checks for a mapping
in the cache table.
o If no mapping is found, it needs to invoke the Address Resolution Protocol
over the network.
o It does this by broadcasting an ARP query onto the network.
o This query contains the target IP address.
o Each host receives the query and checks to see if it matches its IP address.
o If it does match, the host sends a response message that contains its link-
layer address (MAC Address) back to the originator of the query.
o The originator adds the information contained in this response to its ARP
table.
o For example,
To determine system B‘s physical (MAC) address, system A broadcasts
an ARP request containing B‘s IP address to all machines on its
network.

o All nodes except the destination discard the packet but update their ARP
table.
o Destination host (System B)constructs an ARP Response packet
o ARP Response is unicast and sent back to the source host (System A).
o Source stores target Logical & Physical address pair in its ARP table from
ARP Response.
o If target node does not exist on same network, ARP request is sent to
default router.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com

CS 3591 - Computer Networks Unit 5

ARP Packet

RARP – Reverse ARP

o Reverse Address Resolution protocol (RARP) allows a host to convert its
MAC address to the corresponding IP address.

3. DLC SERVICES
 The data link control (DLC) deals with procedures for communication
between two adjacent nodes—node-to-node communication—no matter
whether the link is dedicated or broadcast.
 Data link control service include
(1) Framing (2) Flow Control (3) Error Control

1. FRAMING
 The data-link layer packs the bits of a message into frames, so that each
frame is distinguishable from another.

 Although the whole message could be packed in one frame, that is not
normally done.
 One reason is that a frame can be very large, making flow and error control
very inefficient.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com

CS 3591 - Computer Networks Unit 5

 When a message is carried in one very large frame, even a single-bit error
would require the retransmission of the whole frame.
 When a message is divided into smaller frames, a single-bit error affects
only that small frame.
 Framing in the data-link layer separates a message from one source to a
destination by adding a sender address and a destination address.
 The destination address defines where the packet is to go; the sender
address helps the recipient acknowledge the receipt.

Frame Size
 Frames can be of fixed or variable size.
 Frames of fixed size are called cells. In fixed-size framing, there is no need
for defining the boundaries of the frames; the size itself can be used as a
delimiter.
 In variable-size framing, we need a way to define the end of one frame and
the beginning of the next. Two approaches were used for this purpose: a
character-oriented approach and a bit-oriented approach.

Character-Oriented Framing
 In character-oriented (or byte-oriented) framing, data to be carried are 8-bit
characters.
 To separate one frame from the next, an 8-bit (1-byte) flag is added at the
beginning and the end of a frame.
 The flag, composed of protocol-dependent special characters, signals the
start or end of a frame.

 Any character used for the flag could also be part of the information.
 If this happens, when it encounters this pattern in the middle of the data,the
receiver thinks it has reached the end of the frame.
 To fix this problem, a byte-stuffing strategy was added to character-
oriented framing.

Byte Stuffing (or) Character Stuffing

 Byte stuffing is the process of adding one extra byte whenever there is a
flag or escape character in the text.
 In byte stuffing, a special byte is added to the data section of the frame
when there is a character with the same pattern as the flag.
 The data section is stuffed with an extra byte. This byte is usually called the
escape character (ESC) and has a predefined bit pattern.
 Whenever the receiver encounters the ESC character, it removes it from the
data section and treats the next character as data, not as a delimiting flag.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com

CS 3591 - Computer Networks Unit 5

Bit-Oriented Framing
 In bit-oriented framing, the data section of a frame is a sequence of bits to
be interpreted by the upper layer as text, graphic, audio, video, and so on.
 In addition to headers and trailers), we still need a delimiter to separate one
frame from the other.
 Most protocols use a special 8-bit pattern flag, 01111110, as the delimiter to
define the beginning and the end of the frame

 If the flag pattern appears in the data, the receiver must be informed that
this is not the end of the frame.
 This is done by stuffing 1 single bit (instead of 1 byte) to prevent the pattern
from looking like a flag. The strategy is called bit stuffing.

Bit Stuffing
 Bit stuffing is the process of adding one extra 0 whenever five
consecutive 1s follow a 0 in the data, so that the receiver does not
mistake the pattern 0111110 for a flag.
 In bit stuffing, if a 0 and five consecutive 1 bits are encountered, an extra 0
is added.
 This extra stuffed bit is eventually removed from the data by the receiver.
 The extra bit is added after one 0 followed by five 1‘s regardless of the
value of the next bit.
 This guarantees that the flag field sequence does not inadvertently appear in
the frame.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com

CS 3591 - Computer Networks Unit 5

2. FLOW CONTROL
o Flow control refers to a set of procedures used to restrict the amount
of data that the sender can send before waiting for acknowledgment.
o The receiving device has limited speed and limited memory to store the
data.
o Therefore, the receiving device must be able to inform the sending device to
stop the transmission temporarily before the limits are reached.
o It requires a buffer, a block of memory for storing the information until they
are processed.

Two methods have been developed to control the flow of data:

o Stop-and-Wait
o Sliding Window
o
STOP-AND-WAIT
o The simplest scheme is the stop-and-wait algorithm.
o In the Stop-and-wait method, the sender waits for an acknowledgement
after every frame it sends.
o When acknowledgement is received, then only next frame is sent.
o The process of alternately sending and waiting of a frame continues until
the sender transmits the EOT (End of transmission) frame.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com

CS 3591 - Computer Networks Unit 5

o If the acknowledgement is not received within the allotted time, then the
sender assumes that the frame is lost during the transmission, so it will
retransmit the frame.
o The acknowledgement may not arrive because of the following three
scenarios :
1. Original frame is lost
2. ACK is lost
3. ACK arrives after the timeout

Advantage of Stop-and-wait
o The Stop-and-wait method is simple as each frame is checked and
acknowledged before the next frame is sent

Disadvantages of Stop-And-Wait
o In stop-and-wait, at any point in time, there is only one frame that is sent
and waiting to be acknowledged.
o This is not a good use of transmission medium.
o To improve efficiency, multiple frames should be in transition while
waiting for ACK.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com

CS 3591 - Computer Networks Unit 5

PIGGYBACKING

A method to combine a data frame

with ACK.
Piggybacking saves bandwidth
Station A and B both have data to
send.
Instead of sending separately,
station A sends a data frame that
includes an ACK.
Station B does the same thing.

SLIDING WINDOW
o The Sliding Window is a method of flow control in which a sender can
transmit the several frames before getting an acknowledgement.
o In Sliding Window Control, multiple frames can be sent one after the
another due to which capacity of the communication channel can be utilized
efficiently.
o A single ACK acknowledge multiple frames.
o Sliding Window refers to imaginary boxes at both the sender and receiver
end.
o The window can hold the frames at either end, and it provides the upper
limit on the number of frames that can be transmitted before the
acknowledgement.
o Frames can be acknowledged even when the window is not completely
filled.
o The window has a specific size in which they are numbered as modulo-n
means that they are numbered from 0 to n-1.
o For example, if n = 8, the frames are numbered from
0,1,2,3,4,5,6,7,0,1,2,3,4,5,6,7,0,1........
o The size of the window is represented as n-1. Therefore, maximum n-1
frames can be sent before acknowledgement.
o When the receiver sends the ACK, it includes the number of the next frame
that it wants to receive.
o For example, to acknowledge the string of frames ending with frame
number 4, the receiver will send the ACK containing the number 5.
o When the sender sees the ACK with the number 5, it got to know that the
frames from 0 through 4 have been received.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com

CS 3591 - Computer Networks Unit 5

Sender Window Receiver Window

o At the beginning of a transmission, the o At the beginning of transmission, the

sender window contains n-1 frames. receiver window does not contain n frames,
o When a frame is sent, the size of the but it contains n-1 spaces for frames.
window shrinks. o When the new frame arrives, the size of the
o For example, if the size of the window window shrinks.
is ‗w‘ and if three frames are sent out, o For example, the size of the window is w
then the number of frames left out in and if three frames are received then the
the sender window is w-3. number of spaces available in the window
o Once the ACK has arrived, then the is (w-3).
sender window expands to the number o Once the acknowledgement is sent, the
which will be equal to the number of receiver window expands by the number
frames acknowledged by ACK. equal to the number of frames
acknowledged.

Example of Sliding Window

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com

CS 3591 - Computer Networks Unit 5

3. ERROR CONTROL

Data can be corrupted during transmission. For reliable communication, errors

must be detected and corrected. Error Control is a technique of error detection and
retransmission.
TYPES OF ERRORS
SINGLE-BIT ERROR
The term Single-bit error means that only one bit of a given data unit (such as byte,
character, data unit or packet) is changed from 1 to 0 or from 0 to 1.

BURST ERROR
The term Burst Error means that two or more bits in the data unit have changed
from 1 to 0 or from 0 to 1.

ERROR DETECTION TECHNIQUES / METHODS

The basic idea behind any error detection scheme is to add additional information
to a frame that can be used to determine if errors have been introduced.

PARITY CHECK
 One bit, called parity bit is added to every data unit so that the total number
of 1‘s in the data unit becomes even (or) odd.
 The source then transmits this data via a link, and bits are checked and
verified at the destination.
 Data is considered accurate if the number of bits (even or odd) matches the
number transmitted from the source.
 This techniques is the most common and least complex method.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com

CS 3591 - Computer Networks Unit 5

1. Even parity – Maintain even number of 1s

E.g., 1011 → 1011 1
2. Odd parity – Maintain odd number of 1s
E.g., 1011 → 1011 0

CYCLIC REDUNDANCY CHECK

 Cyclic codes refers to encoding messages by adding a fixed-length check
value.
 CRCs are popular because they are simple to implement, easy to analyze
mathematically and particularly good at detecting common errors caused in
transmission channels.

Steps Involved :
 Consider the original message (dataword) as M(x) consisting of ‗k‘ bits and
the divisor as C(x) consists of ‗n+1‘ bits.
 The original message M(x) is appended by ‗n‘ bits of zero‘s. Let us call
this zero-extended message as T(x).
 Divide T(x) by C(x) and find the remainder.
 The division operation is performed using XOR operation.
 The resultant remainder is appended to the original message M(x) as CRC
and sent by the sender(codeword).

Example 1:
 Consider the Dataword / Message M(x) = 1001
 Divisor C(x) = 1011 (n+1=4)
 Appending ‗n‘ zeros to the original Message M(x).
 The resultant messages is called T(x) = 1001 000. (here n=3)
 Divide T(x) by the divisor C(x) using XOR operation.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com

CS 3591 - Computer Networks Unit 5

Sender Side :

Receiver Side:
(For Both Case – Without Error and With Error)

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com

CS 3591 - Computer Networks Unit 5

Polynomials
 A pattern of 0s and 1s can be represented as a polynomial with coefficients
of 0 and 1.
 The power of each term shows the position of the bit; the coefficient shows
the value of the bit.

INTERNET CHECKSUM

 Checksum is a calculated value that is used to determine the integrity of

data.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com

CS 3591 - Computer Networks Unit 5

Example : Let the message to be transmitted be 7,11,12,0,6.

ERROR CONTROL

 Error control includes both error detection and error correction.

 Whenever an error is detected, specified frames are retransmitted
 It allows the receiver to inform the sender if a frame is lost or damaged
during transmission and coordinates the retransmission of those frames by
the sender.
 Includes the following actions:
o Error detection
o Positive Acknowledgement (ACK): if the frame arrived with no
errors
o Negative Acknowledgement (NAK): if the frame arrived with errors
o Retransmissions after Timeout: Frame is retransmitted after certain
amount of time if no acknowledgement was received
 Error control in the data link layer is based on automatic repeat request
(ARQ).

Categories of Error Control

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com

CS 3591 - Computer Networks Unit 5

STOP-AND-WAIT ARQ
 Stop-and-wait ARQ is a technique used to retransmit the data in case of
damaged or lost frames.
 This technique works on the principle that the sender will not transmit the
next frame until it receives the acknowledgement of the last transmitted
frame.

Two possibilities of the retransmission in Stop and Wait ARQ:

o Damaged Frame: When the receiver receives a damaged frame(i.e., the

frame contains an error), then it returns the NAK frame. For example, when
the frame DATA 1 is sent, and then the receiver sends the ACK 0 frame
means that the data 1 has arrived correctly. The sender transmits the next
frame: DATA 0. It reaches undamaged, and the receiver returns ACK 1.
The sender transmits the third frame: DATA 1. The receiver reports an error
and returns the NAK frame. The sender retransmits the DATA 1 frame.

o Lost Frame: Sender is equipped with the timer and starts when the frame is
transmitted. Sometimes the frame has not arrived at the receiving end so
that it cannot be acknowledged either positively or negatively. The sender
waits for acknowledgement until the timer goes off. If the timer goes off, it
retransmits the last transmitted frame.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com

CS 3591 - Computer Networks Unit 5

SLIDING WINDOW ARQ

Sliding Window ARQ is a technique used for continuous transmission error

control.

Two protocols used in sliding window ARQ:

1. GO-BACK-N ARQ
o In Go-Back-N ARQ protocol, if one frame is lost or damaged, then it
retransmits all the frames after which it does not receive the positive ACK.

o In the above figure, three frames (Data 0,1,2) have been transmitted before
an error discovered in the third frame.
o The receiver discovers the error in Data 2 frame, so it returns the NAK 2
frame.
o All the frames including the damaged frame (Data 2,3,4) are discarded as it
is transmitted after the damaged frame.
o Therefore, the sender retransmits the frames (Data2,3,4).

2. SELECTIVE-REJECT(REPEAT) ARQ

o Selective-Reject ARQ technique is more efficient than Go-Back-n ARQ.

o In this technique, only those frames are retransmitted for which negative
acknowledgement (NAK) has been received.
o The receiver storage buffer keeps all the damaged frames on hold until the
frame in error is correctly received.
o The receiver must have an appropriate logic for reinserting the frames in a
correct order.
o The sender must consist of a searching mechanism that selects only the
requested frame for retransmission.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com

CS 3591 - Computer Networks Unit 5

o In the above figure, three frames (Data 0,1,2) have been transmitted before
an error discovered in the third frame.
o The receiver discovers the error in Data 2 frame, so it returns the NAK 2
frame.
o The damaged frame only (Data 2) is discarded.
o The other subsequent frames (Data 3,4) are accepted.
o Therefore, the sender retransmits only the damaged frame (Data2).

4. DATA-LINK LAYER PROTOCOLS

Four protocols have been defined for the data-link layer controls.
They are
1. Simple Protocol
2. Stop-and-Wait Protocol
3. Go-Back-N Protocol
4. Selective-Repeat Protocol

1.SIMPLE PROTOCOL

o The first protocol is a simple protocol with neither flow nor error control.
o We assume that the receiver can immediately handle any frame it receives.
o In other words, the receiver can never be overwhelmed with incoming
frames.
o The data-link layers of the sender and receiver provide transmission
services for their network layers.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com

CS 3591 - Computer Networks Unit 5

o The data-link layer at the sender gets a packet from its network layer, makes
a frame out of it, and sends the frame.
o The data-link layer at the receiver receives a frame from the link, extracts
the packet from the frame, and delivers the packet to its network layer.

NOTE :

2. STOP-AND-WAIT PROTOCOL
REFER STOP AND WAIT FROM FLOW CONTROL

3. GO-BACK-N PROTOCOL
REFER GO-BACK-N ARQ FROM ERROR CONTROL

4. SELECTIVE-REPEAT PROTOCOL
REFER SELECTIVE-REPEAT ARQ FROM ERROR CONTROL

5. HDLC (HIGH-LEVEL DATA LINK CONTROL)

o High-level Data Link Control (HDLC) is a bit-oriented protocol

o HDLC is used for communication over point-to-point and multipoint links.
o HDLC implements the Stop-and-Wait protocol.

HDLC CONFIGURATIONS AND TRANSFER MODES

HDLC provides two common transfer modes that can be used in different
configurations:
1. Normal response mode (NRM)
2. Asynchronous balanced mode (ABM).

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com

CS 3591 - Computer Networks Unit 5

Normal response mode (NRM)

o In normal response mode (NRM), the station configuration is unbalanced.
o We have one primary station and multiple secondary stations.
o A primary station can send commands; a secondary station can only
respond.
o The NRM is used for both point-to-point and multipoint links.

Asynchronous balanced mode (ABM)

o In ABM, the configuration is balanced.
o The link is point-to-point, and each station can function as a primary and a
secondary (acting as peers).
o This is the common mode today.

HDLC FRAMES
HDLC defines three types of frames:
1. Information frames (I-frames) - used to carry user data
2. Supervisory frames (S-frames) - used to carry control information
3. Unnumbered frames (U-frames) – reserved for system management

Each type of frame serves as an envelope for the transmission of a different type of
message.
Each frame in HDLC may contain up to six fields:
1. Beginning flag field
2. Address field
3. Control field
4. Information field (User Information/ Management Information)
5. Frame check sequence (FCS) field
6. Ending flag field

In multiple-frame transmissions, the ending flag of one frame can serve as the
beginning flag of the next frame.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com

CS 3591 - Computer Networks Unit 5

o Flag field - This field contains synchronization pattern 01111110, which

identifies both the beginning and the end of a frame.
o Address field - This field contains the address of the secondary station. If a
primary station created the frame, it contains a ‗to’ address. If a secondary
station creates the frame, it contains a ‗from’ address. The address field can
be one byte or several bytes long, depending on the needs of the network.
o Control field. The control field is one or two bytes used for flow and error
control.
o Information field. The information field contains the user‘s data from the
network layer or management information. Its length can vary from one
network to another.
o FCS field. The frame check sequence (FCS) is the HDLC error detection
field. It can contain either a 16- bit or 32-bit CRC.

CONTROL FIELD FORMAT FOR THE DIFFERENT FRAME TYPES

Control Field for I-Frames
o I-frames are designed to carry user data from the network layer. In addition,
they can include flow-control and error-control information

o The first bit defines the type. If the first bit of the control field is 0, this
means the frame is an I-frame.
o The next 3 bits, called N(S), define the sequence number of the frame.
o The last 3 bits, called N(R), correspond to the acknowledgment number
when piggybacking is used.
o The single bit between N(S) and N(R) is called the P/F bit. If this bit is 1 it
means poll (the frame is sent by a primary station to a secondary).

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com

CS 3591 - Computer Networks Unit 5

o If this bit is 0 it means final(the frame is sent by a secondary to a Primary).

Control Field for S-Frames

o Supervisory frames are used for flow and error control whenever
piggybacking is either impossible or inappropriate.
o S-frames do not have information fields

o If the first 2 bits of the control field are 10, this means the frame is an S-
frame.
o The last 3 bits, called N(R),correspond to the acknowledgment number
(ACK) or negative acknowledgment number (NAK), depending on the type
of S-frame.
o The 2 bits called code are used to define the type of S-frame itself.
o With 2 bits, we can have four types of S-frames –
Receive ready (RR), Receive not ready (RNR), Reject (REJ) and
Selective reject (SREJ).

Control Field for U-Frames

o Unnumbered frames are used to exchange session management and control
information between connected devices.
o U-frames contain an information field, but used only for system
management information and not user data.

o If the first 2 bits of the control field are 11, this means the frame is an U-
frame.
o U-frame codes are divided into two sections: a 2-bit prefix before the P/F
bit and a 3-bit suffix after the P/F bit.
o Together, these two segments (5 bits) can be used to create up to 32
different types of U-frames.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com

CS 3591 - Computer Networks Unit 5

6. POINT-TO-POINT PROTOCOL (PPP)

o Point-to-Point Protocol (PPP) was devised by IETF (Internet Engineering
Task Force) in 1990 as a Serial Line Internet Protocol (SLIP).
o PPP is a data link layer communications protocol used to establish a direct
connection between two nodes.
o It connects two routers directly without any host or any other networking
device in between.
o It is used to connect the Home PC to the server of ISP via a modem.
o It is a byte - oriented protocol that is widely used in broadband
communications having heavy loads and high speeds.
o Since it is a data link layer protocol, data is transmitted in frames. It is also
known as RFC 1661.

Services Provided by PPP

The main services provided by Point - to - Point Protocol are −
1. Defining the frame format of the data to be transmitted.
2. Defining the procedure of establishing link between two points and
exchange of data.
3. Stating the method of encapsulation of network layer data in the frame.
4. Stating authentication rules of the communicating devices.
5. Providing address for network communication.
6. Providing connections over multiple links.
7. Supporting a variety of network layer protocols by providing a range os
services.

PPP Frame
PPP is a byte - oriented protocol where each field of the frame is composed of one
or more bytes.

1. Flag − 1 byte that marks the beginning and the end of the frame. The bit
pattern of the flag is 01111110.
2. Address − 1 byte which is set to 11111111 in case of broadcast.
3. Control − 1 byte set to a constant value of 11000000.
4. Protocol − 1 or 2 bytes that define the type of data contained in the payload
field.
5. Payload − This carries the data from the network layer. The maximum
length of the payload field is 1500 bytes.
6. FCS − It is a 2 byte(16-bit) or 4 bytes(32-bit) frame check sequence for
error detection. The standard code used is CRC.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com

CS 3591 - Computer Networks Unit 5

Byte Stuffing in PPP Frame

Byte stuffing is used is PPP payload field whenever the flag sequence appears in
the message, so that the receiver does not consider it as the end of the frame. The
escape byte, 01111101, is stuffed before every byte that contains the same byte as
the flag byte or the escape byte. The receiver on receiving the message removes
the escape byte before passing it onto the network layer.

Transition Phases in PPP

The PPP connection goes through different states as shown in a transition phase
diagram.

 Dead: In dead phase the link is not used. There is no active carrier and the
line is quiet.
 Establish: Connection goes into this phase when one of the nodes start
communication. In this phase, two parties negotiate the options. If
negotiation is successful, the system goes into authentication phase or
directly to networking phase.
 Authenticate: This phase is optional. The two nodes may decide whether
they need this phase during the establishment phase. If they decide to
proceed with authentication, they send several authentication packets. If the
result is successful, the connection goes to the networking phase; otherwise,
it goes to the termination phase.
 Network: In network phase, negotiation for the network layer protocols
takes place.PPP specifies that two nodes establish a network layer
agreement before data at the network layer can be exchanged. This is
because PPP supports several protocols at network layer. If a node is
running multiple protocols simultaneously at the network layer, the
receiving node needs to know which protocol will receive the data.
 Open: In this phase, data transfer takes place. The connection remains in
this phase until one of the endpoints wants to end the connection.
 Terminate: In this phase connection is terminated.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com

CS 3591 - Computer Networks Unit 5

Components/Protocols of PPP
Three sets of components/protocols are defined to make PPP powerful:
 Link Control Protocol (LCP)
 Authentication Protocols (AP)
 Network Control Protocols (NCP)

Link Control Protocol (LCP) − It is responsible for establishing, configuring,

testing, maintaining and terminating links for transmission. It also provides
negotiation mechanisms to set options between the two endpoints. Both endpoints
of the link must reach an agreement about the options before the link can be
established.

Authentication Protocols (AP) − Authentication means validating the identity of

a user who needs to access a set of resources. PPP has created two protocols for
authentication -Password Authentication Protocol and Challenge Handshake
Authentication Protocol.

PAP
The Password Authentication Protocol (PAP) is a simple authentication procedure
with a two-step process:
a. The user who wants to access a system sends an authentication
identification (usually the user name) and a password.
b. The system checks the validity of the identification and password and
either accepts or denies connection.

CHAP
The Challenge Handshake Authentication Protocol (CHAP) is a three-way
handshaking authentication protocol that provides greater security than PAP. In
this method, the password is kept secret; it is never sent online.
a. The system sends the user a challenge packet containing a challenge
value.
b. The user applies a predefined function that takes the challenge value and
the user‘s own password and creates a result. The user sends the result in
the response packet to the system.
c. The system does the same. It applies the same function to the password of
the user (known to the system) and the challenge value to create a result.
If the result created is the same as the result sent in the response packet,
access is granted; otherwise, it is denied.

CHAP is more secure than PAP, especially if the system continuously changes the
challenge value. Even if the intruder learns the challenge value and the result, the
password is still secret.

Network Control Protocols (NCP) − PPP is a multiple-network-layer protocol. It

can carry a network-layer data packet from protocols defined by the Internet. PPP

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com

CS 3591 - Computer Networks Unit 5

has defined a specific Network Control Protocol for each network protocol. These
protocols are used for negotiating the parameters and facilities for the network
layer. For every higher-layer protocol supported by PPP, one NCP is there.

7. MEDIA ACCESS CONTROL (MAC)

 When two or more nodes transmit data at the same time, their frames will
collide and the link bandwidth is wasted during collision.
 To coordinate the access of multiple sending/receiving nodes to the shared
link, we need a protocol to coordinate the transmission.
 These protocols are called Medium or Multiple Access Control (MAC)
Protocols. MAC belongs to the data link layer of OSI model
 MAC defines rules for orderly access to the shared medium. It tries to
ensure that no two nodes are interfering with each other‘s transmissions,
and deals with the situation when they do.

Issues involved in MAC

The key issues involved are –
 Where the control is exercised - refers to whether the control is exercised
in a centralized or distributed manner
 How the control is exercised - refers to in what manner the control is
exercised

Goals of MAC
1. Fairness in sharing
2. Efficient sharing of bandwidth
3. Need to avoid packet collisions at the receiver due to interference

MAC Management
 Medium allocation (collision avoidance)
 Contention resolution (collision handling)

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com

CS 3591 - Computer Networks Unit 5

MAC Types
 Round-Robin : – Each station is given opportunity to transmit in turns.
Either a central controller polls a station to permit to go, or stations can
coordinate among themselves.
 Reservation : - Station wishing to transmit makes reservations for time
slots in advance. (Centralized or distributed).
 Contention (Random Access) : - No control on who tries; If collision‖
occurs, retransmission takes place.

MECHANISMS USED
 Wired Networks :
o CSMA / CD – Carrier Sense Multiple Access / Collision Detection
 Wireless Networks :
o CSMA / CA – Carrier Sense Multiple Access / Collision Avoidance

CARRIER SENSE MULTIPLE ACCESS / COLLISION DETECTION

(CSMA / CD)

 Carrier Sense in CSMA/CD means that all the nodes sense the medium to
check whether it is idle or busy.
 If the carrier sensed is idle, then the node transmits the entire
frame.
 If the carrier sensed is busy, the transmission is postponed.

 Collision Detect means that a node listens as it transmits and can therefore
detect when a frame it is transmitting has collided with a frame transmitted
by another node.

Flowchart of CSMA/CD Operation

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com

CS 3591 - Computer Networks Unit 5

Transmitter Algorithm in CSMA/CD

 Transmitter Algorithm defines the procedures for a node that senses a busy
medium.
 Three types of Transmitter Algorithm exist.
 They are
1. Non-Persistent Strategy
2. Persistent Strategy : 1-Persistent & P-Persistent

Non-Persistent Strategy
 In the non-persistent method, a station that has a frame to send senses the
line.
 If the line is idle, it sends immediately.
 If the line is not idle, it waits a random amount of time and then senses the
line again.

 The non-persistent approach reduces the chance of collision because it is

unlikely that two or more stations will wait the same amount of time and
retry to send simultaneously.
 However, this method reduces the efficiency of the network because the
medium remains idle when there may be stations with frames to send.

Persistent Strategy
1- Persistent :
 The 1-persistent method is simple and straightforward.
 In this method, after the station finds the line idle, it sends its frame
immediately (with probability 1).

 This method has the highest chance of collision because two or more
stations may find the line idle and send their frames immediately.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com

CS 3591 - Computer Networks Unit 5

P-Persistent :
 In this method, after the station finds the line idle it follows these steps:
 With probability p, the station sends its frame.
 With probability q = 1 − p, the station waits for the beginning of the next
time slot and checks the line again.

 The p-persistent method is used if the channel has time slots with a slot
duration equal to or greater than the maximum propagation time.
 The p-persistent approach combines the advantages of the other two
strategies. It reduces the chance of collision and improves efficiency.
.
EXPONENTIAL BACK-OFF
 Once an adaptor has detected a collision and stopped its transmission, it waits
a certain amount of time and tries again.
 Each time it tries to transmit but fails, the adaptor doubles the amount of time
it waits before trying again.
 This strategy of doubling the delay interval between each retransmission
attempt is a general technique known as exponential back-off.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com

CS 3591 - Computer Networks Unit 5

CARRIER SENSE MULTIPLE ACCESS / COLLISION AVOIDANCE

(CSMA/CA)
 Carrier sense multiple access with collision avoidance (CSMA/CA) was
invented for wireless networks.
 Wireless protocol would follow exactly the same algorithm as the
Ethernet—Wait until the link becomes idle before transmitting and back off
should a collision occur.
 Collisions are avoided through the use of CSMA/CA‘s three strategies: the
interframe space, the contention window, and acknowledgments

Interframe Space (IFS) - First, collisions are avoided by deferring transmission

even if the channel is found idle. When an idle channel is found, the station does
not send immediately. It waits for a period of time called the interframe space or
IFS.

Contention Window - The contention window is an amount of time divided into

slots. A station that is ready to send chooses a random number of slots as its wait
time. The number of slots in the window changes according to the binary
exponential backoff strategy. This means that it is set to one slot the first time and
then doubles each time the station cannot detect an idle channel after the IFS time.

Acknowledgment - In addition, the data may be corrupted during the

transmission.The positive acknowledgment and the time-out timer can help
guarantee that the receiver has received the frame.

8. WIRED LAN : ETHERNET (IEEE 802.3)

 Ethernet was developed in the mid-1970‘s at the Xerox Palo Alto Research
Center (PARC),
 IEEE controls the Ethernet standards.
 The Ethernet is the most successful local area networking technology, that
uses bus topology.
 The Ethernet is multiple-access networks that is set of nodes send and
receive frames over a shared link.
 Ethernet uses the CSMA / CD ( Carrier Sense Multiple Access with
Collision Detection) mechanism.

EVOLUTION OF ETHERNET

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com

CS 3591 - Computer Networks Unit 5

Standard Ethernet (10 Mbps)

The original Ethernet technology with the data rate of 10 Mbps as the Standard
Ethernet.
Standard Ethernet types are
1. 10Base5: Thick Ethernet,
2. 10Base2: Thin Ethernet ,
3. 10Base-T: Twisted-Pair Ethernet
4. 10Base-F: Fiber Ethernet.

10Base5: Thick Ethernet 10Base2: Thin Ethernet

 The first implementation is called  The second implementation is

10Base5, thick Ethernet, or called 10Base2, thin Ethernet, or
Thicknet. Cheapernet.
 10Base5 was the first Ethernet  10Base2 also uses a bus topology,
specification to use a bus topology but the cable is much thinner and
with an external more flexible.
transceiver(transmitter/receiver)  In this case, the transceiver is
connected via a tap to a thick coaxial normally part of the network
cable. interface card (NIC), which is
installed inside the station.

10Base-T: Twisted-Pair Ethernet 10Base-F: Fiber Ethernet

 The third implementation is called  Although there are several types of

10Base-T or twisted-pair Ethernet. optical fiber 10-Mbps Ethernet, the
 10Base-T uses a physical star most common is called 10Base-F.
topology. The stations are connected  10Base-F uses a star topology to
to a hub via two pairs of twisted connect stations to a hub.
cable.
 The stations are connected to the
hub using two fiber-optic cables.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com

CS 3591 - Computer Networks Unit 5

Fast Ethernet (100 Mbps)

Fast Ethernet or 100BASE-T provides transmission speeds up to 100 megabits per

second and is typically used for LAN backbone systems.
The 100BASE-T standard consists of three different component specifications –
1. 100 BASE-TX
2. 100BASE-T4
3. 100BASE-FX

100 BASE-TX 100BASE-T4 100BASE-FX

100Base-TX uses two A new standard, called 100Base-FX uses two
pairs of twisted-pair 100Base-T4, was pairs of fiber-optic cables.
cable either UTP or STP. designed to use four pairs Optical fiber can easily
A 100Base-TX network of UTP for transmitting handle high bandwidth
can provide a data rate of 100 Mbps. requirements.
100 Mbps.

Gigabit Ethernet (1 Gbps)

 The Gigabit Ethernet upgrades the data rate to 1 Gbps(1000 Mbps).
 Gigabit Ethernet can be categorized as either a two-wire or a four-wire
implementation.
 The two-wire implementations use fiber-optic cable (1000Base-SX, short-
wave, or 1000Base-LX, long-wave), or STP (1000Base-CX).
 The four-wire version uses category 5 twisted-pair cable (1000Base-T).

10 Gigabit Ethernet(10 Gbps)

 10 Gigabit Ethernet is an upcoming Ethernet technology that transmits at 10
Gbps.
 10 Gigabit Ethernet enables a familiar network technology to be used in
LAN, MAN and WAN architectures.
 10 Gigabit Ethernet uses multimode optical fiber up to 300 meters and
single mode fiber up to 40 kilometers.
 Four implementations are the most common: 10GBase-SR, 10GBase-LR,
10GBase-EW, and 10GBase-X4.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com

CS 3591 - Computer Networks Unit 5

ACCESS METHOD/ PROTOCOL OF ETHERNET

The access method of Ethernet is CSMA/CD.
Note : Refer CSMA/CD from MAC

COLLISION DETECTION IN ETHERNET

 As the Ethernet supports collision detection, senders are able to determine a
collision.
 At the moment an adaptor detects that its frame is colliding with another, it
first makes sure to transmit a 32-bit jamming sequence along with the 64-
bit preamble (totally 96 bits) and then stops the transmission.
 These 96 bits are sometimes called Runt Frame.

FRAME FORMAT OF ETHERNET

The Ethernet frame is defined by the format given in the Fig.

 The 64-bit preamble allows the receiver to synchronize with the signal; it is
a sequence of alternating 0‘s and 1‘s.
 Both the source and destination hosts are identified with a 48-bit address.
 The packet type field serves as the demultiplexing key.
 Each frame contains up to 1500 bytes of data(Body).
 CRC is used for Error detection

Ethernet Addresses
 Every Ethernet host has a unique Ethernet address (48 bits – 6 bytes).
 Ethernet address is represented by sequence of six numbers separated by
colons.
 Each number corresponds to 1 byte of the 6 byte address and is given by
pair of hexadecimal digits.
 Eg: 8:0:2b:e4:b1:2 is the representation of
00001000 00000000 00101011 11100100 10110001 00000010
 Each frame transmitted on an Ethernet is received by every adaptor
connected to the Ethernet.
 In addition to unicast addresses an Ethernet address consisting of all 1s is
treated as broadcast address.
 Similarly the address that has the first bit set to 1 but it is not the broadcast
address is called multicast address.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com

CS 3591 - Computer Networks Unit 5

ADVANTAGES OF ETHERNET
Ethernets are successful because
 It is extremely easy to administer and maintain. There are no switches that
can fail, no routing or configuration tables that have to be kept up-to-date,
and it is easy to add a new host to the network.

 It is inexpensive: Cable is cheap, and the only other cost is the network
adaptor on each host.

9. WIRELESS LAN ( IEEE 802.11)

 Wireless communication is one of the fastest-growing technologies.
 The demand for connecting devices without the use of cables is increasing
everywhere.
 Wireless LANs can be found on college campuses, in office buildings, and
in many public areas.

ADVANTAGES OF WLAN / 802.11

1. Flexibility: Within radio coverage, nodes can access each other as radio
waves can penetrate even partition walls.
2. Planning : No prior planning is required for connectivity as long as
devices follow standard convention
3. Design : Allows to design and develop mobile devices.
4. Robustness : Wireless network can survive disaster. If the devices survive,
communication can still be established.

DISADVANTAGES OF WLAN / 802.11

1. Quality of Service : Low bandwidth (1 – 10 Mbps), higher error rates due
to interference, delay due to error correction and detection.
2. Cost : Wireless LAN adapters are costly compared to wired adapters.
3. Proprietary Solution : Due to slow standardization process, many solution
are proprietary that limit the homogeneity of operation.
4. Restriction : Individual countries have their own radio spectral policies.
This restricts the development of the technology
5. Safety and Security : Wireless Radio waves may interfere with other
devices. Eg; In a hospital, radio waves may interfere with high-tech
equipment.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com

CS 3591 - Computer Networks Unit 5

TECHNOLOGY USED IN WLAN / 802.11

 WLAN‘s uses Spread Spectrum (SS) technology.
 The idea behind Spread spectrum technique is to spread the signal over a
wider frequency band than normal, so as to minimize the impact of
interference from other devices.
 There are two types of Spread Spectrum:
 Frequency Hopping Spread Spectrum (FHSS)
 Direct Sequence Spread Spectrum (DSSS)

Frequency Hopping Spread Spectrum (FHSS)

 Frequency hopping is a spread spectrum technique that involves
transmitting the signal over a random sequence of frequencies.
 That is, first transmitting at one frequency, then a second, then a third, and
so on.
 The random sequence of frequencies is computed by a pseudorandom
number generator.
 The receiver uses the same algorithm as the sender and initializes it with the
same seed and hence is able to hop frequencies in sync with the transmitter
to correctly receive the frame.

Direct Sequence Spread Spectrum (DSSS)

 Each bit of data is represented by multiple bits in the transmitted signal.
 DSSS takes a user data stream and performs an XOR operation with a
pseudo –random number.
 This pseudo random number is called as chipping sequence.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com

CS 3591 - Computer Networks Unit 5

TOPOLOGY IN WLAN / 802.11

WLANs can be built with either of the following two topologies /architecture:
 Infra-Structure Network Topology
 Ad Hoc Network Topology

Infra-Structure Topology Ad-Hoc Topology

(AP based Topology) (Peer-to-Peer Topology)

An infrastructure network is the An adhoc network is the architecture

network architecture for providing that is used to support mutual
communication between wireless communication between wireless
clients and wired network resources. clients.
The transition of data from the Typically, an ad- hoc network is
wireless to wired medium occurs via created spontaneously and does not
a Base Station called AP(Access support access to wired networks.
Point). An adhoc network does not require
An AP and its associated wireless an AP.
clients define the coverage area.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com

CS 3591 - Computer Networks Unit 5

ARCHITECURE OF WLAN / 802.11

 The standard defines two kinds of services: the Basic Service Set (BSS) and the
Extended Service Set (ESS).

Basic Service Set (BSS)

 IEEE 802.11 defines the basic service set (BSS) as the building blocks of a
wireless LAN.
 A basic service set is made of stationary or mobile wireless stations and an
optional central base station, known as the access point (AP).

Extended Service Set (ESS)

 An extended service set (ESS) is made up of two or more BSSs with APs.
 In this case, the BSSs are connected through a distribution system, which is a
wired or a wireless network.
 The distribution system connects the APs in the BSSs. The extended service set
uses two types of stations: mobile and stationary.
 The mobile stations are normal stations inside a BSS.
 The stationary stations are AP stations that are part of a wired LAN.

Station Types
IEEE 802.11 defines three types of stations based on their mobility in a wireless
LAN:
1. No-transition - A station with no-transition mobility is either stationary
(not moving) or moving only inside a BSS.
2. BSS-transition - A station with BSS-transition mobility can move from
one BSS to another, but the movement is confined inside one ESS
ESS-transition - A station with ESS-transition mobility can move from one
ESS to another.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com

CS 3591 - Computer Networks Unit 5

COLLISION AVOIDANCE IN WLAN / 802.11

Wireless protocol would follow exactly the same algorithm as the Ethernet—Wait
until the link becomes idle before transmitting and back off should a collision
occur.

Hidden Node Problem

 Consider the situation shown in the Figure.

 Here A and C are both within range of B but not with each other.
 Suppose both A and C want to communicate with B and so they each send a
frame to B.
 A and C are unaware of each other since their signals do not carry that far.
 These two frames collide with each other at B, but neither A nor C is aware
of this collision.
 A and C are said to be hidden nodes with respect to each other.

Exposed Node Problem

 Each of the four nodes is able to send and receive signals that reach just the
nodes to its immediate left and right.
 For example, B can exchange frames with A and C but it cannot reach D,
while C can reach B and D but not A.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com

CS 3591 - Computer Networks Unit 5

 Suppose B is sending to A. Node C is aware of this communication because

it hears B‘s transmission.
 If at the same time, C wants to transmit to node D.
 It would be a mistake, however, for C to conclude that it cannot transmit to
anyone just because it can hear B‘s transmission.
 This is not a problem since C‘s transmission to D will not interfere with A‘s
ability to receive from B.
 This is called exposed problem.
 Although B and C are exposed to each other‘s signals, there is no
interference if B transmits to A while C transmits to D.

MULTIPLE ACCESS WITH COLLISION AVOIDANCE (MACA)

 MACA is used to avoid collisions caused by the hidden terminal problem
and exposed terminal problem.
 MACA uses short signaling packets called RTS and CTS for collision
avoidance.
 The RTS and CTS signals helps us to determine who else is in the
transmission range or who is busy.
 When a sender wants to transmit, it sends a signal called Request-To-Send
(RTS).
 If the receiver allows the transmission, it replies to the sender a signal called
Clear-To-Send (CTS).
 Any node that sees the CTS frame knows that it is close to the receiver, and
therefore cannot transmit for the period of time.
 Any node that sees the RTS frame but not the CTS frame is not close
enough to the receiver to interfere with it, and so is free to transmit.
 The Signaling packets RTS and CTS contains information such as
 sender address
 receiver address
 length of the data to be sent/received

 The receiver sends an ACK to the sender after successfully receiving a

frame.
 All nodes must wait for this ACK before trying to transmit.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com

CS 3591 - Computer Networks Unit 5

 When two or more nodes detect an idle link and try to transmit an RTS frame at
the same time, their RTS frames will collide with each other.
 802.11 do not support collision detection, but instead, the senders realize the
collision has happened when they do not receive the CTS frame after a period
of time.
 Each node waits for a random amount of time before trying again.
 The amount of time a given node delays is defined by exponential back-off
algorithm.

DISTRIBUTION SYSTEM IN WLAN / 802.11

In wireless network, nodes can move freely. Some nodes are allowed to roam and
some are connected to a wired network infrastructure called access points (AP),
and they are connected to each other by a so-called distribution system.

 Two nodes can communicate directly with each other if they are within
reach of each other,
 When the nodes are at different range, for example when node A wish to
communicate with node E, A first sends a frame to its access point (AP-1),
which forwards the frame across the distribution system to AP-3, which
finally transmits the frame to E.

Scanning Process in Distribution System

 The technique for selecting an Access Point is called scanning.
 Scanning will take place whenever a node joins the network as well as
when it is not satisfied with the current access point signal.
 It involves the following four steps:
 The node sends a Probe Request frame.
 All AP‘s within reach reply with a Probe Response frame.
 The node selects one of the access points and sends that AP an
Association Request frame.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com

CS 3591 - Computer Networks Unit 5

 The AP replies with an Association Response frame.

 There are two types of Scanning. They are

1. Active Scanning
2. Passive Scanning

Active Scanning
When node C moves from the cell serviced by AP-1 to the cell serviced by AP-2.
As it moves, it sends Probe frames, which eventually result in Probe Response.
Since the node is actively searching for an access point it is called active
scanning.

Passive Scanning
AP’s periodically send a Beacon frame to the nodes that advertises the
capabilities of the access point which includes the transmission rates supported by
the AP. This is called passive scanning and a node can change to this AP based on
the Beacon frame simply by sending it an Association Request frame back to the
access point.

FRAME FORMAT OF WLAN / 802.11

 Control field - contains three subfields :

 Type field - Indicates whether the frame carries data, RTS or CTS frame
 To DS - Data frame sent to DS
 From DS – ACK sent from DS

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com

CS 3591 - Computer Networks Unit 5

When both the DS bits are set to 0, it indicates that one node is
sending directly to another . Addr l identifies the target node and
Addr2 identifies the source node.

When both the DS bits are set to 1, it indicates that one node is
sending the message to another indirectly using the distribution
system.

 Duration - contains the duration of time the medium is occupied by the nodes.
 Addr l - identifies the final original destination
 Addr 2 - identifies the immediate sender (the one that forwarded the frame
from the distribution system to the ultimate destination)
 Addr 3 - identifies the intermediate destination (the one that accepted the
frame from a wireless node and forwarded it across the distribution
system)
 Addr 4 - identifies the original source
 Sequence Control - to avoid duplication of frames sequence number is
assigned to each frame
 Payload - Data from sender to receiver
 CRC - used for Error detection of the frame.

10. BLUETOOTH (IEEE 802.15.1 )

 A Bluetooth is an ad hoc network, which means that the network is formed
spontaneously.
 Bluetooth is a wireless LAN technology designed to connect devices of
different functions such as telephones, notebooks, computers (desktop and
laptop), cameras, printers, when they are at a short distance from each other.
 Bluetooth technology is the implementation of a protocol defined by the
IEEE 802.15 standard.
 The standard defines a wireless personal-area network (PAN)
 Bluetooth operates in the 2.4 GHz Unlicensed ISM band.
 The range for Bluetooth communication is 0-30 feet (10 meters).
 This distance can be increased to 100 meters by amplifying the power.
 Bluetooth links have typical bandwidths around 1 to 3 Mbps.
 Bluetooth is specified by an industry consortium called the Bluetooth Special
Interest Group.
 Upto eight devices can be connected through Bluetooth.
 One device will function as a Master and the other seven devices will
function as slaves.
 Bluetooth uses Frequency Hopping Spread Spectrum (FHSS) to avoid any
interference.
 Bluetooth supports two kinds of links:
 Asynchronous Connectionless (ACL) links - for data
 Synchronous Connection oriented (SCO) links - for audio/voice

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com

CS 3591 - Computer Networks Unit 5

BLUETOOTH ARCHITECTURE
Bluetooth defines two types of networks: Piconet and Scatternet.

PICONET
 The basic Bluetooth network configuration is called a Piconet
 A Piconet is a collection of eight bluetooth devices which are synchronized.
 One device in the piconet can act as Primary (Master), all other devices
connected to the master act as Secondary (Slaves).
 All the secondary stations synchronize their clocks and hopping sequence
with the primary.

 Any communication is between the primary/master and a secondary/slave.

 The communication between the primary and secondary stations can be
one-to-one or one-to-many.
 The slaves do not communicate directly with each other.
 The devices in a piconet can be in any one of the three types/states.
 They are
 Active Device / State
1. Connected to the piconet and participates in the communication.
2. Can be a Master or a Slave device.
3. All active devices are assigned a 3-bit address (AMA).

 Parked Device / State

1. Connected to the piconet, but does not actively articipate in the
communication.
2. More than 200 devices can be parked.
3. All parked devices use an 8-bit parked member address (PMA).

 Stand-by Device / State

1. Not connected to the piconet.
2. They do not participate in the piconet currently but may take part at a
later time.
3. Devices in stand-by do not need an address.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com

CS 3591 - Computer Networks Unit 5

 If a parked device wants to communicate and there are already seven active
slaves, one slave has to switch to park state to allow the parked device to
switch to active state.

SCATTERNET
 Piconets can be combined to form what is called a scatternet.
 Many piconets with overlapping coverage can exist simultaneously,called
Scatternet.
 A secondary station in one piconet can be the primary in another piconet.
 This station can receive messages from the primary in the first piconet (as a
secondary) and, acting as a primary, deliver them to secondaries in the second
piconet.
 A station can be a member of two piconets.

 In the example given below, there are two piconets, in which one slave
participates in two different piconets.
 Master of one piconet cannot act as the master of another piconet.
 But the Master of one piconet can act as a Slave in another piconet

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com

CS 3591 - Computer Networks Unit 5

BLUETOOTH LAYERS

Radio Layer
 The radio layer is roughly equivalent to the physical layer of the Internet
model.
 Bluetooth uses the frequency-hopping spread spectrum (FHSS) method
in the physical layer to avoid interference from other devices or other
networks.
 Bluetooth hops 1600 times per second, which means that each device
changes its modulation frequency 1600 times per second.
 To transform bits to a signal, Bluetooth uses a sophisticated version of FSK,
called GFSK.

Baseband Layer
 The baseband layer is roughly equivalent to the MAC sublayer in LANs.
 The access method is TDMA.
 The primary and secondary stations communicate with each other using
time slots. The length of a time slot is exactly 625 µs.
 During that time, a primary sends a frame to a secondary, or a secondary
sends a frame to the primary.

L2CAP
 The Logical Link Control and Adaptation Protocol, or L2CAP (L2 here
means LL) is equivalent to the LLC sublayer in LANs.
 It is used for data exchange on an ACL link.
 SCO channels do not use L2CAP.
 The L2CAP functions are : multiplexing, segmentation and reassembly,
quality of service (QoS), and group management.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com

CS 3591 - Computer Networks Unit 5

11. CONNECTING DEVICES

 Connecting devices are used to connect hosts together to make a network or
to connect networks together to make an internet.
 Connecting devices can operate in different layers of the Internet model.

 Connecting devices are divided into five different categories on the basis of
layers in which they operate in the network.

1. Devices which operate below the physical layer - Passive hub.

2. Devices which operate at the physical layer - Repeater.
3. Devices which operate at the physical and data link layers - Bridge.
4. Devices which operate at the physical layer, data link layer and network layer –
Router.
5. Devices which operate at all five layers - Gateway.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com

CS 3591 - Computer Networks Unit 5

1. HUBS
 Several networks need a central location to connect media segments
together. These central locations are called as hubs.
 The hub organizes the cables and transmits incoming signals to the other
media segments.

The three types of hubs are:

i) Passive hub
 It is a connector, which connects wires coming from the different branches.
 By using passive hub, each computer can receive the signal which is sent
from all other computers connected in the hub.

ii) Active Hub

 It is a multiport repeater, which can regenerate the signal.
 It is used to create connections between two or more stations in a physical
star topology.

iii) Intelligent Hub

 Intelligent hub contains a program of network management and intelligent
path selection.

2. REPEATERS

 A repeater receives the signal and it regenerates the signal in original bit
pattern before the signal gets too weak or corrupted.
 It is used to extend the physical distance of LAN.
 Repeater works on physical layer.
 A repeater has no filtering capability.
 A repeater is implemented in computer networks to expand the coverage
area of the network, repropagate a weak or broken signal and or service
remote nodes.
 Repeaters amplify the received/input signal to a higher frequency domain
so that it is reusable, scalable and available.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com

CS 3591 - Computer Networks Unit 5

 Repeaters are also known as signal boosters or range extender.

 A repeater cannot connect two LANs, but it connects two segments of the
same LAN.

3. BRIDGES

 Bridges operate in physical layer as well as data link layer.

 As a physical layer device, they regenerate the receive signal.
 As a data link layer, the bridge checks the physical (MAC) address (of the
source and the destination) contained in the frame.
 The bridge has a filtering feature.
 It can check the destination address of a frame and decides, if the frame
should be forwarded or dropped.
 Bridges are used to connect two or LANs working on the same protocol.

Types of Bridges :

 Transparent Bridges
These are the bridge in which the stations are completely unaware of the
bridge‘s existence i.e. whether or not a bridge is added or deleted from the
network , reconfiguration of the stations is unnecessary.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com

CS 3591 - Computer Networks Unit 5

 Source Routing Bridges

In these bridges, routing operation is performed by source station and the
frame specifies which route to follow.

 Translation Bridges
These bridges connect networks with different architectures, such as Ethernet
and Token Ring. These bridges appear as:
– Transparent bridges to an Ethernet host
– Source-routing bridges to a Token Ring host

4. SWITCHES
◾ A switch is a small hardware device which is used to join multiple
computers together with one local area network (LAN).
◾ A switch is a mechanism that allows us to interconnect links to form a large
network.

◾ Switch is data link layer device.

◾ A switch is a multi port bridge with a buffer .
◾ Switches are used to forward the packets based on MAC addresses.
◾ It is operated in full duplex mode.
◾ Packet collision is minimum as it directly communicates between source
and destination.
◾ It does not broadcast the message as it works with limited bandwidth.
◾ A switch‘s primary job is to receive incoming packets on one of its links
and to transmit them on some other link.
◾ A Switch is used to transfer the data only to the device that has been
addressed.

51

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com

CS 3591 - Computer Networks Unit 5

 Input ports receive stream of packets, analyzes the header, determines the
output port and passes the packet onto the fabric.
 Ports contain buffers to hold packets before it is forwarded.
 If buffer space is unavailable, then packets are dropped.
 If packets at several input ports queue for a single output port, then only one
of them is forwarded.

Types of Switch

i) Two- Layer Switch

 The two-layer switch performs at the physical and the data link layer.
 It is a bridge with many ports and design allows faster performs.
 A bridge is used to connect different LANs together.
 The two- layer switch can make a filtering decision bases on the MAC
address of the received frame. However, two- layer switch has a buffer
which holds the frame for processing.

ii) Three- Layer Switch

 The three-layer switch is a router.
 The switching fabric in a three-layer allows a faster table lookup and
forwarding mechanism.

5. ROUTERS
 A router is a three-layer device.
 It operates in the physical, data-link, and network layers.
 As a physical-layer device, it regenerates the signal it receives.
 As a link-layer device, the router checks the physical addresses (source and
destination) contained in the packet.
 As a network-layer device, a router checks the network-layer addresses.
 A router is a device like a switch that routes data packets based on their IP
addresses.
 A router can connect networks. A router connects the LANs and WANs on
the internet.
 A router is an internetworking device.
 It connects independent networks to form an internetwork.

 The key function of the router is to determine the shortest path to the
destination.
 Router has a routing table, which is used to make decision on selecting the
route.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com

CS 3591 - Computer Networks Unit 5

 The routing table is updated dynamically based on which they make

decisions on routing the data packets.

6. GATEWAY

 A gateway is a device, which operates in all five layers of the internet or

seven layers of OSI model.
 It is usually a combination of hardware and software.
 Gateway connects two independent networks.

 Gateways are generally more complex than switch or router.

 Gateways basically works as the messenger agents that take data from one
system, interpret it, and transfer it to another system.
 Gateways are also called protocol converters
 A gateway accepts a packet formatted for one protocol and converts it to a
packet formatted to another protocol before forwarding it.
 The gateway must adjust the data rate, size and data format.

7. BROUTER
 Brouter is a hybrid device. It combines the features of both bridge and
router.
 Brouter is a combination of Bridge and Router.
 Functions as a bridge for nonroutable protocols and a router for routable
protocols.
 As a router, it is capable of routing packets across networks.
 As a bridge, it is capable of filtering local area network traffic.
 Provides the best attributes of both a bridge and a router
 Operates at both the Data Link and Network layers and can replace separate
bridges and routers.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com

CS 3591 - Computer Networks Unit 5

TRANSMISSION MEDIA
o Transmission media is a communication channel that carries the information from
the sender to the receiver.
o Data is transmitted through the electromagnetic signals.
o The main functionality of the transmission media is to carry the information in
the form of bits (Either as Electrical signals or Light pulses).
o It is a physical path between transmitter and receiver in data communication.
o The characteristics and quality of data transmission are determined by the
characteristics of medium and signal.
o Transmission media is of two types : Guided Media (Wired) and UnGuided
Media (wireless).

o In guided (wired) media, medium characteristics are more important whereas, in

unguided (wireless) media, signal characteristics are more important.
o Different transmission media have different properties such as bandwidth, delay,
cost and ease of installation and maintenance.
o The transmission media is available in the lowest layer of the OSI reference
model, i.e., Physical layer.

FACTORS FOR DESIGNING THE TRANSMISSION MEDIA

o Bandwidth: All the factors are remaining constant, the greater the bandwidth of a
medium, the higher the data transmission rate of a signal.
o Transmission impairment: When the received signal is not identical to the
transmitted one due to the transmission impairment. The quality of the signals
will get destroyed due to transmission impairment.
o Interference: An interference is defined as the process of disrupting a signal
when it travels over a communication medium on the addition of some unwanted
signal.

CAUSES OF TRANSMISSION IMPAIRMENT

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com

CS 3591 - Computer Networks Unit 5

o Attenuation: Attenuation means the loss of energy, i.e., the strength of the signal
decreases with increasing the distance which causes the loss of energy.
o Distortion: Distortion occurs when there is a change in the shape of the signal.
This type of distortion is examined from different signals having different
frequencies. Each frequency component has its own propagation speed, so they
reach at a different time which leads to the delay distortion.
o Noise: When data is travelled over a transmission medium, some unwanted signal
is added to it which creates the noise.

TYPES / CLASSES OF TRANSMISSION MEDIA

GUIDED MEDIA
 It is defined as the physical medium through which the signals are transmitted.
 It is also known as Bounded media.
 Types of Guided media: Twisted Pair Cable, Coaxial Cable , Fibre Optic Cable

TWISTED PAIR CABLE

 Twisted pair is a physical media made up of a pair of cables twisted with each
other.
 A twisted pair cable is cheap as compared to other transmission media.
 Installation of the twisted pair cable is easy, and it is a lightweight cable.
 The frequency range for twisted pair cable is from 0 to 3.5KHz.
 A twisted pair consists of two insulated copper wires arranged in a regular spiral
pattern.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com

CS 3591 - Computer Networks Unit 5

Unshielded Twisted Pair

An unshielded twisted pair is widely used in telecommunication.
Following are the categories of the unshielded twisted pair cable:
o Category 1: Suports low-speed data.
o Category 2: It can support upto 4Mbps.

o Category 3: It can support upto 16Mbps.

o Category 4: It can support upto 20Mbps.
o Category 5: It can support upto 200Mbps.

Advantages :
o It is cheap.
o Installation of the unshielded twisted pair is easy.
o It can be used for high-speed LAN.

Disadvantage:
o This cable can only be used for shorter distances because of attenuation.

Shielded Twisted Pair

A shielded twisted pair is a cable that contains the mesh surrounding the wire that allows
the higher transmission rate.

Advantages :
o The cost of the shielded twisted pair cable is not very high and not very low.
o Installation of STP is easy.
o It has higher capacity as compared to unshielded twisted pair cable.
o It has a higher attenuation.
o It is shielded that provides the higher data transmission rate.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com

CS 3591 - Computer Networks Unit 5

Disadvantages:
o It is more expensive as compared to UTP and coaxial cable.
o It has a higher attenuation rate.

COAXIAL CABLE

o Coaxial cable(Coax) is a very commonly used transmission media, for example,

TV wire is usually a coaxial cable.

o The name of the cable is coaxial as it contains two conductors parallel to each
other.
o It has a higher frequency as compared to Twisted pair cable.
o The inner conductor of the coaxial cable is made up of copper, and the outer
conductor is made up of copper mesh.
o The middle core is made up of non-conductive cover that separates the inner
conductor from the outer conductor.
o The middle core is responsible for the data transferring whereas the copper mesh
prevents from the EMI(Electromagnetic interference).
o Common applications of coaxial cable are Cable TV networks and traditional
Ethernet LANs.

Coaxial Cable Standards

 Coaxial cables are categorized by their Radio Government (RG) ratings.
 Each RG number denotes a unique set of physical specifications, including the
wire gauge of the inner conductor, the thickness and type of the inner insulator,
the construction of the shield, and the size and type of the outer casing.
 Each cable defined by an RG rating is adapted for a specialized function.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com

CS 3591 - Computer Networks Unit 5

Types of Coaxial cable :
1. Baseband transmission: It is defined as the process of transmitting a single
signal at high speed.
2. Broadband transmission: It is defined as the process of transmitting multiple
signals simultaneously.
Advantages :
o The data can be transmitted at high speed.
o It has better shielding as compared to twisted pair cable.
o It provides higher bandwidth.

Disadvantages :
o It is more expensive as compared to twisted pair cable.
o If any fault occurs in the cable causes the failure in the entire network.

FIBRE OPTIC CABLE

o Fibre optic cable is a cable that uses electrical signals for communication.
o Fibre optic is a cable that holds the optical fibres coated in plastic that are used to
send the data by pulses of light.
o The plastic coating protects the optical fibres from heat, cold, electromagnetic
interference from other types of wiring.
o Fibre optics provide faster data transmission than copper wires.

Basic elements of Fibre optic cable:

o Core: The optical fibre consists of a narrow strand of glass or plastic known as a
core. A core is a light transmission area of the fibre. The more the area of the
core, the more light will be transmitted into the fibre.
o Cladding: The concentric layer of glass is known as cladding. The main
functionality of the cladding is to provide the lower refractive index at the core
interface as to cause the reflection within the core so that the light waves are
transmitted through the fibre.
o Jacket: The protective coating consisting of plastic is known as a jacket. The
main purpose of a jacket is to preserve the fibre strength, absorb shock and extra
fibre protection.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com

CS 3591 - Computer Networks Unit 5

Advantages:
o Greater Bandwidth
o Less signal attenuation
o Immunity to electromagnetic interference
o Resistance to corrosive materials
o Light weight
o Greater immunity to tapping

Disadvantages :
o Requires Expertise for Installation and maintenance
o Unidirectional light propagation.
o Higher Cost.

Propagation Modes of Fibre Optics

 Current technology supports two modes (multimode and single mode) for
propagating light along optical channels, each requiring fiber with different
physical characteristics.
 Multimode can be implemented in two forms: step-index or graded-index.

Multimode Propagation
 Multimode is so named because multiple beams from a light source move through
the core in different paths.
 How these beams move within the cable depends on the structure of the core.

Multimode Step-index fiber Multimode Graded-index fiber

In multimode step-index fiber, the density  The multimode graded-index fiber,

of the core remains constant from the decreases this distortion of the signal
center to the edges. through the cable.
A beam of light moves through this  The word index here refers to the index
constant density in a straight line until it of refraction.
reaches the interface of the core and the  The index of refraction is related to
cladding. density.
 At the interface, there is an abrupt change  A graded index fiber, therefore, is one
due to a lower density; this alters the angle with varying densities.
of the beam‘s motion.  Density is highest at the center of the
The term step-index refers to the core and decreases gradually to its
suddenness of this change, which lowest at the edge.
contributes to the distortion of the signal
as it passes through the fiber.
https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com

CS 3591 - Computer Networks Unit 5

Single-Mode Propagation

 Single-mode uses step-index fiber and a highly focused source of light that limits
beams to a small range of angles, all close to the horizontal.
 The single-mode fiber itself is manufactured with a much smaller diameter than
that of multimode fiber, and with substantially lower density (index of refraction).
 The decrease in density results in a critical angle that is close enough to 90° to
make the propagation of beams almost horizontal.
 In this case, propagation of different beams is almost identical, and delays are
negligible. All the beams arrive at the destination ―together‖ and can be
recombined with little distortion to the signal.

UNGUIDED MEDIA
o An unguided transmission transmits the electromagnetic waves without using any
physical medium. Therefore it is also known as wireless transmission.
o In unguided media, air is the media through which the electromagnetic energy
can flow easily.

o Unguided transmission is broadly classified into three categories :

Radio Waves, Microwaves , Infrared

RADIO WAVES

o Radio waves are the electromagnetic waves that are transmitted in all the
directions of free space.
o Radio waves are omnidirectional, i.e., the signals are propagated in all the
directions.
o The range in frequencies of radio waves is from 3Khz to 1Khz.
o In the case of radio waves, the sending and receiving antenna are not aligned, i.e.,
the wave sent by the sending antenna can be received by any receiving antenna.
o An example of the radio wave is FM radio.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com

CS 3591 - Computer Networks Unit 5

Applications of Radio waves:

o A Radio wave is useful for multicasting when there is one sender and many
receivers.
o An FM radio, television, cordless phones are examples of a radio wave.

Advantages of Radio waves:

o Radio transmission is mainly used for wide area networks and mobile cellular
phones.
o Radio waves cover a large area, and they can penetrate the walls.
o Radio transmission provides a higher transmission rate.

MICROWAVES

Microwaves are of two types - Terrestrial microwave & Satellite microwave

Terrestrial Microwave
o Terrestrial Microwave transmission is a technology that transmits the focused
beam of a radio signal from one ground-based microwave transmission antenna to
another.
o Microwaves are the electromagnetic waves having the frequency in the range
from 1GHz to 1000 GHz.
o Microwaves are unidirectional as the sending and receiving antenna is to be
aligned, i.e., the waves sent by the sending antenna are narrowly focused.
o In this case, antennas are mounted on the towers to send a beam to another
antenna which is km away.
o It works on the line of sight transmission, i.e., the antennas mounted on the
towers are at the direct sight of each other.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com

CS 3591 - Computer Networks Unit 5

Characteristics of Terrestrial Microwave:

o Frequency range: The frequency range of terrestrial microwave is from 4-6 GHz
to 21-23 GHz.
o Bandwidth: It supports the bandwidth from 1 to 10 Mbps.
o Short distance: It is inexpensive for short distance.
o Long distance: It is expensive as it requires a higher tower for a longer distance.
o Attenuation: Attenuation means loss of signal. It is affected by environmental
conditions and antenna size.

Advantages of Terrestrial Microwave:

o Microwave transmission is cheaper than using cables.
o It is free from land acquisition as it does not require any land for the installation
of cables.
o Microwave transmission provides an easy communication in terrains as the
installation of cable in terrain is quite a difficult task.
o Communication over oceans can be achieved by using microwave transmission.

Disadvantages of Terrestrial Microwave:

o Eavesdropping.
o Out of phase signal
o Susceptible to weather condition
o Bandwidth limited

Satellite Microwave
o A satellite is a physical object that revolves around the earth at a known height.
o Satellite communication is more reliable nowadays as it offers more flexibility
than cable and fibre optic systems.
o We can communicate with any point on the globe by using satellite
communication.
o The satellite accepts the signal that is transmitted from the earth station, and it
amplifies the signal. The amplified signal is retransmitted to another earth station.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com

CS 3591 - Computer Networks Unit 5

Advantages of Satellite Microwave:

o The coverage area of a satellite microwave is more than the terrestrial microwave.
o The transmission cost of the satellite is independent of the distance from the
centre of the coverage area.
o Satellite communication is used in mobile and wireless communication
applications.
o It is easy to install.
o It is used in a wide variety of applications such as weather forecasting, radio/TV
signal broadcasting, mobile communication, etc.

Disadvantages of Satellite Microwave:

o Satellite designing and development requires more time and higher cost.
o The Satellite needs to be monitored and controlled on regular periods so that it
remains in orbit.
o The life of the satellite is about 12-15 years. Due to this reason, another launch of
the satellite has to be planned before it becomes non-functional.

INFRARED WAVES

o An infrared transmission is a wireless technology used for communication over

short ranges.
o The frequency of the infrared in the range from 300 GHz to 400 THz.
o It is used for short-range communication such as data transfer between two cell
phones, TV remote operation, data transfer between a computer and cell phone
and devices that resides in the same closed area.

Characteristics of Infrared:
o It supports high bandwidth, and hence the data rate will be very high.
o Infrared waves cannot penetrate the walls. Therefore, the infrared communication
in one room cannot be interrupted by the nearby rooms.
o An infrared communication provides better security with minimum interference.
o Infrared communication is unreliable outside the building because the sun rays
will interfere with the infrared waves.

SWITCHING
o The technique of transferring the information from one computer network to
another network is known as switching.
o Switching in a computer network is achieved by using switches.
o A switch is a small hardware device which is used to join multiple computers
together with one local area network (LAN).

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com

CS 3591 - Computer Networks Unit 5

o Switches are devices capable of creating temporary connections between two or

more devices linked to the switch.
o Switches are used to forward the packets based on MAC addresses.
o A Switch is used to transfer the data only to the device that has been addressed. It
verifies the destination address to route the packet appropriately.
o It is operated in full duplex mode.
o It does not broadcast the message as it works with limited bandwidth.

Advantages of Switching:
o Switch increases the bandwidth of the network.
o It reduces the workload on individual PCs as it sends the information to only that
device which has been addressed.
o It increases the overall performance of the network by reducing the traffic on the
network.
o There will be less frame collision as switch creates the collision domain for each
connection.

Disadvantages of Switching:
o A Switch is more expensive than network bridges.
o A Switch cannot determine the network connectivity issues easily.
o Proper designing and configuration of the switch are required to handle multicast
packets.

Types of Switching Techniques

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com

CS 3591 - Computer Networks Unit 5

CIRCUIT SWITCHING
o Circuit switching is a switching technique that establishes a dedicated path
between sender and receiver.
o In the Circuit Switching Technique, once the connection is established then the
dedicated path will remain to exist until the connection is terminated.
o Circuit switching in a network operates in a similar way as the telephone works.
o A complete end-to-end path must exist before the communication takes place.
o In case of circuit switching technique, when any user wants to send the data,
voice, video, a request signal is sent to the receiver then the receiver sends back
the acknowledgment to ensure the availability of the dedicated path. After
receiving the acknowledgment, dedicated path transfers the data.
o Circuit switching is used in public telephone network. It is used for voice
transmission.
o Fixed data can be transferred at a time in circuit switching technology.

Phases in Circuit Switching

Communication through circuit switching has 3 phases:

1. Connection Setup / Establishment - In this phase, a dedicated circuit is

established from the source to the destination through a number of intermediate
switching centres. The sender and receiver transmits communication signals to
request and acknowledge establishment of circuits.

2. Data transfer - Once the circuit has been established, data and voice are
transferred from the source to the destination. The dedicated connection remains
as long as the end parties communicate.

3. Connection teardown / Termination - When data transfer is complete, the

connection is relinquished. The disconnection is initiated by any one of the user.
Disconnection involves removal of all intermediate links from the sender to the
receiver.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 www.BrainKart.com

CS 3591 - Computer Networks Unit 5

Advantages
 It is suitable for long continuous transmission, since a continuous
transmissionroute is established, that remains throughout the conversation.
 The dedicated path ensures a steady data rate of communication.
 No intermediate delays are found once the circuit is established. So, they
aresuitable for real time communication of both voice and data transmission.

Disadvantages
 Circuit switching establishes a dedicated connection between the end parties.
This dedicated connection cannot be used for transmitting any other data, even if
the data load is very low.
 Bandwidth requirement is high even in cases of low data volume.
 There is underutilization of system resources. Once resources are allocated to a
particular connection, they cannot be used for other connections.
 Time required to establish connection may be high.
 It is more expensive than other switching techniques as a dedicated path is
required for each connection.

https://play.google.com/store/apps/details?id=info.therithal.brainkart.annauniversitynotes&hl=en_IN
 Click on Subject/Paper under Semester to enter.
Environmental Sciences
Professional English and Sustainability -
Professional English - - II - HS3252 Discrete Mathematics GE3451
I - HS3152 - MA3354
Statistics and Theory of Computation
Matrices and Calculus Numerical Methods - Digital Principles and - CS3452
3rd Semester

4th Semester
- MA3151 MA3251 Computer Organization
1st Semester

2nd Semester

- CS3351 Artificial Intelligence

Engineering Graphics and Machine Learning
Engineering Physics - - CS3491
- GE3251 Foundation of Data
PH3151
Science - CS3352
Database Management
Physics for
Engineering Chemistry System - CS3492
Information Science Data Structure -
- CY3151 - PH3256 CS3301

Basic Electrical and

Algorithms - CS3401
Problem Solving and Electronics Engineering Object Oriented
Python Programming - - BE3251 Programming - CS3391 Introduction to
GE3151 Operating Systems -
Programming in C -
CS3451
CS3251

Computer Networks - Object Oriented

CS3591 Software Engineering
- CCS356
Compiler Design - Human Values and
5th Semester

CS3501 Embedded Systems Ethics - GE3791

7th Semester

8th Semester
6th Semester

and IoT - CS3691

Cryptography and Open Elective 2
Cyber Security - Open Elective-1 Project Work /
CB3491
Open Elective 3 Intership
Distributed Computing Elective-3
- CS3551 Open Elective 4
Elective-4
Elective 1
Management Elective
Elective-5
Elective 2
Elective-6
 All Computer Engg Subjects - [ B.E., M.E., ] (Click on Subjects to
enter)
Programming in C Computer Networks Operating Systems
Programming and Data Programming and Data Problem Solving and Python
Structures I Structure II Programming
Database Management Systems Computer Architecture Analog and Digital
Communication
Design and Analysis of Microprocessors and Object Oriented Analysis
Algorithms Microcontrollers and Design
Software Engineering Discrete Mathematics Internet Programming
Theory of Computation Computer Graphics Distributed Systems
Mobile Computing Compiler Design Digital Signal Processing
Artificial Intelligence Software Testing Grid and Cloud Computing
Data Ware Housing and Data Cryptography and Resource Management
Mining Network Security Techniques
Service Oriented Architecture Embedded and Real Time Multi - Core Architectures
Systems and Programming
Probability and Queueing Theory Physics for Information Transforms and Partial
Science Differential Equations
Technical English Engineering Physics Engineering Chemistry
Engineering Graphics Total Quality Professional Ethics in
Management Engineering
Basic Electrical and Electronics Problem Solving and Environmental Science and
and Measurement Engineering Python Programming Engineering