Eaton DC Power Solutions
APR48-ES Energy Saver Rectifier
The Eaton® APR48-ES control, producing peak
Energy Saver Rectifier is efficiency in excess of 96%
designed for communications for typical operating loads,
network operators who are while also maintaining a very
striving to cut energy costs high minimum operating
across the network, and/or efficiency of 95 to 96%, over
to meet aggressive carbon a very wide range of loads
footprint reduction targets. (from 30% to 100% of the
2kW capacity).
Operating with well over
96% efficiency, it produces at The high power density, short
least 50% less waste energy depth and flexible mounting
than most other modern options makes the Energy
rectifiers, and with potentially Saver Rectifier well suited
greater savings over older to limited space applications
infrastructure. such as ETSI and road side
cabinets.
The 2kW Energy Saver
Rectifier is the ideal module The Energy Saver Rectifier is
size for powering access fully compatible with existing
applications within a telecom Eaton 3G systems and it is
network such as cellular base one of the easiest rectifiers
stations, ADSL equipment, to use, with a simple plug-
and fibre nodes. and-go insertion. It operates
under a wide range of AC
This rectifier features power conditions and in
intelligent digital signal temperatures at up to 70°C
processing for enhanced (158°F).
Features
• 2000W output power
• Energy saving efficiency greater than 96%
• Wide efficiency curve
• Industry leading power density
• Fast on-line expansion of rectifiers (hot-swap)
• Simple ‘plug and go’ insert
• Unity power factor
• Digital signal processing for enhanced control
• Wide AC supply conditions
• Wide output voltage range
• Constant power output
• Compliance with international standards
Technical Specifications
Input
120V/208-240V, 50/60Hz (nominal)
AC Supply 185 – 275V full output power up to 50°C [122°F]
90 – 185V reduced output power
Power Factor >0.99 (50 – 100% output current)
>96% peak
Efficiency
>95% (20 – 100% output power)
Output
DC Output Voltage
43 – 57.5V
Range
DC Output (maximum) 2000W @ 48V
Environmental
-40°C – +70°C [-40°F – +158°F]
Operating Temperature
Output power derates above 50°C [122°F]
Range
Temperature controlled, variable speed, high reliability
Cooling
fan <50dBA ambient temperature 25°C
Mechanical
Dimensions H,W,D 3U: 133mm [5.25”], 42mm [1.65”],
266mm [10.45”] overall
Weight 1.7kg [3.7 lb]
Certifications
North America UL, FCC Verification, CSA, IC
Australia / New Zealand C-tick, Telepermit
In the interests of continual product improvement all specifications
are subject to change without notice. Performance ratings are valid
with all other variables at Nominal.
Email: [email protected]
www.eaton.com/dcpowersolutions
Eaton Eaton, CellSure, SiteSure, DCTools and PowerManager are trade
EMEA Headquarters names, trademarks, and/or service marks of Eaton Corporation or its
Route de la Longeraie 7 subsidiaries and affiliates. All other trademarks are property of their
1110 Morges, Switzerland respective owners.
Eaton.com
Follow us on social media to get the
© 2021 Eaton Eaton is a registered trademark. latest product and support information.
All Rights Reserved
Publication No. PS154002EN All other trademarks are property
December 2021 of their respective owners.
