Insulation
US
System
Premium performance pre-insulated ductwork
The Kingspan KoolDuct® System is an advanced and premium performance
pre–insulated HVAC ductwork system which is installed in a single step
incorporating the ductwork and insulation all in one. Kingspan KoolDuct®
panels comprise a fiber-free rigid thermoset phenolic insulation core faced
with branded silver aluminum foil on one side and plain silver aluminum foil
on the other. The Kingspan KoolDuct® System eliminates virtually all of the
problems associated with galvanized sheet steel, fiber glass duct board and
pre–insulated rigid polyiso (PIR) ductwork systems while, at the same time,
offering additional advantages. Ductwork fabricated from The Kingspan
KoolDuct® system can reduce air–leakage rates to a fraction of those typical
of rectangular sheet metal ductwork. This cutting edge system thus offers
the triple benefits of cutting energy use, cutting operational carbon dioxide
(CO2) emissions and cutting costs.
What’s different about the Kingspan KoolDuct® System?
UL Listed – was the first premium performance pre–insulated ductwork
Low air–leakage – rates can be reduced to a fraction of those typical of
in the world to be UL Listed as a Class 1 Air Duct, to Standard for
rectangular sheet metal ductwork – can easily achieve SMACNA
Safety UL 181 (Underwriters Laboratories: Factory Made Air Ducts & Air
air–leakage Class 3.
Connectors), when fabricated to a specification clearly defined by UL.
Low weight – weighs up to 72% less than ductwork constructed from High R–values with thin insulation – the low thermal conductivity
galvanized sheet steel and insulated with fiber glass duct wrap – this (k–value / l–value) of Kingspan KoolDuct® panels makes it the most
makes it ideal for refurbishment projects, where existing building thermally efficient, and hence the thinnest, insulation product
structures have insufficient load capacities for new service loads. commonly used for pre–insulated HVAC ductwork.
Faster installation speeds – low weight ductwork fabricated in sections A fiber-free rigid insulation core – minimizes the risk of loose fibers
up to 13 ft / 3.93 m long, single–fix installation and no need to install entering the airstream through the ductwork, since distributed air does
insulation as a second operation, reduces project scheduling periods for not come into contact with an insulation material that produces loose
insulated ductwork. fibers.
Installed cost savings – reduced labor and materials, including fixings LEED® – ductwork fabricated from The Kingspan KoolDuct® System can
and first level support members, can provide an ideal value engineered contribute points towards achieving credits, including pilot credits, in
ductwork solution without comprising performance. many of the LEED® rating systems.
Application Suitability
The Kingspan KoolDuct® System is designed for use in building services / HVAC applications. It is suitable for both new build and retrofit projects in the
residential, commercial, institutional, light industrial and leisure sectors. Moreover, it is especially suitable for use in non–ferrous applications and on
high profile projects where non–fibrous insulants may be preferred, for instance:
ཛྷ Food, beverage and pharmaceutical industries
ཛྷ Clean air and hygiene controlled environments (hospitals, server rooms)
ཛྷ High relative humidity environments; and swimming pools*
*For swimming pools, non–standard applications and project specific advice, please contact the
Kingspan Insulation HVAC Technical Service Department (see rear cover).
KoolDuct® System
Premium performance pre-insulated ductwork
Comparative Data
The Kingspan Galvanized Rigid
Galvanized Galvanized Galvanized
KoolDuct® KoolDuct® Exterior Galvanized Board Insulation
Product Information Doublewall Single Wall Single Wall with
System R6 Solutions Doublewall with Venture
R6 with R6 wrap R4 Liner
Clad Wrap
Exterior
Rooftop
Interior
Mechanical Rooms
Shaft
Exposed
Indoor Indoor Indoor Indoor Exterior and Exterior and Exterior and
Notes
Only Only Only Only Rooftop Only Rooftop Only Rooftop Only
Weight
14 lbs. 95 lbs. 42 lbs. 42 lbs. 30 lbs. 95 lbs. 63 lbs.
24” x 24” x 5’
Weight
28 lbs. 255 lbs. 127 lbs. 127 lbs. 60 lbs. 255 lbs. 155lbs.
48” x 48” x 5’
Approximate
Cost / Sq. Ft.
$$ $$$ $$ $ $$$$ $$$$ $$$$
Assembly & Fab
(Price Installed)
Kingspan Insulation LLC
2100 Riveredge Parkway | Suite 175
Atlanta | Georgia 30328
T: +1 (800) 241 4402 F: +1 (678) 589 7325
E:
[email protected]www.kingspaninsulation.us
® Kingspan, the G Device and the Lion Device are Registered Trademarks of the Kingspan Group
plc in the US, Canada and other countries. All rights reserved.
® GreenGuard is a Registered Trademark of the Kingspan Group plc in the US. All rights reserved.
kingspan-koolduct-koolduct-system-brochure-en-us-v2
