BCN-P5999-0392-H(1707)MEE

Installation
iQ Works Version 2  Confirm before installation
• Log on to the personal computer as an administrator.

Installation Instructions
• Close all running applications before installation. If the product is installed while other
applications are running, it may not operate normally.

 Batch installation
Install multiple applications in batch.*1

Before Using the Product 1. Insert the DVD-ROM (Disc1) to the DVD-ROM drive.*2
Please read this document before use. Keep the document in a safe place for future reference. 2. Select or enter the necessary information by following the on-screen instructions.*1
Make sure that the end users read the document. 3. Insert the DVD-ROM (Disc2) to the DVD-ROM drive.*2
For the precautions on using iQ Works Version 2, refer to Let's start iQ Works Version 2 [SH- 4. Follow the instructions displayed on the screen.
081261ENG]. 5. Insert the DVD-ROM (Disc3) to the DVD-ROM drive.*2
6. Follow the instructions displayed on the screen.
Notice 7. Insert the DVD-ROM (Disc4) to the DVD-ROM drive.*2
● Reprinting or reproducing the part or all of the contents of this document in any form for any 8. Follow the instructions displayed on the screen.
purpose without the permission of Mitsubishi Electric Corporation is strictly forbidden. *1 Product ID is written on the "License certificate" included with the product. Enter the 12-digit number divided
● Although we have made the utmost effort to follow the revisions of the software and into 3 and 9 digits.
hardware, in some cases, unsynchronized matter may occur. *2 If the installer of MELSOFT iQ Works Version 2 does not start automatically, start the Explorer and double-click
the "setup.exe" in the Disk1 folder on the DVD-ROM.
● The information in this document may be subject to change without notice.
 FX series installation
Operating Environment When using special blocks or special units, installation of the related software is required. The
related software of FX-ENET series may be downloaded from MITSUBISHI ELECTRIC FA
Item Contents Global Website.
Personal computer A personal computer on which Microsoft Windows operates For the method of obtaining the related software, contact the store where you purchased the
CPU*1 Intel Core2 Duo Processor 2GHz or more recommended product.
Required memory*1 64-bit OS: Recommended 2GB or more
32-bit OS: Recommended 1GB or more
 Individual installation
Each application can be used individually by installing only the required application.
Available hard disk capacity 26GB or more
Double-click the "setup.exe" icon on each DVD-ROM to install the application.
Monitor Resolution 1024  768 pixels or higher
Disc*1 Application Storage location of "setup.exe"
OS • Windows 10 (Home, Pro, Enterprise, Education)
(English version) • Windows 8.1, Windows 8.1 (Pro, Enterprise) Disc1 MELSOFT Navigator Disk1\melsoft navigator
• Windows 8, Windows 8 (Pro, Enterprise) MELSOFT FieldDeviceConfigurator Disk1\FDConfig
• Windows 7 (Starter, Home Premium, Professional, Ultimate, Enterprise)
MT Works2*2 Disk2
• Windows Vista (Home Basic, Home Premium, Ultimate, Business,
Enterprise)*2 CW Configurator Disk3
• Windows XP (Professional SP3, Home SP3)*2 Disc2 GX Works3*2 Disk2\GXW3
Communication interface RS-232 port, USB port, Ethernet port PX Developer Disk2\FBDQ
(When a CPU module is directly
connected.) CPU Module Logging Configuration Tool Disk2\LLUTL
GX LogViewer Disk2\VIEWER
*1 For a project including 20,000 or more labels, a 64-bit operating system with Intel Core i7 processor and 8GB or
more memory is recommended. GX Works2 Disk3
*2 64-bit version is not supported. GX Developer*4 Disk3\SUPPORT\GXD1
GX Works2 Help (for FXCPU) Disk4\DocFX
• When the following functions are used, this product may not run properly. Disc3 GT Designer3 (GOT2000)*3 Disk2
• Activating the application with Windows compatible mode.
GT Manual3 2000 Disk3\GTM2000
• Simplified user switch-over
• Remote desktop GT Designer3 (GOT2000)Sample Disk3\GTSample_E

• Windows XP Mode GT Designer3 (GOT1000) Disk4\GTD3_1000

• Windows Touch or Touch Document Converter Disk4\DocCNV
• Modern UI GT Converter2 Disk4\GTCNV2
• Client Hyper-V Data Transfer Disk5\DataTransfer
• Tablet mode GT Manual3 1000 Disk6\GTM1000
• Virtual Desktops
Disc4 RT ToolBox3 Disk2
• In the following cases, the screen of this product may not work properly.
• The size of the text and/or other items on the screen are changed to values other than FR Configurator2 Disk3

default values (such as 96 DPI, 100%, and 9 pt). FR Configurator SW3 Disk3\SW3
• The resolution of the screen is changed in operation. *1 When changing a DVD-ROM, close Windows Explorer.
• The multi-display is set. *2 When GX Works3 or MT Works2 is installed, MR Configurator2 is installed automatically.
• Use the product as a standard user or an administrator for Windows 10, Windows 8.1, *3 Select GT Designer3(GOT2000) only on the Selection of software dialog box.
Windows 8, Windows 7, and Windows Vista. *4 Windows 10 is not supported.

 Precautions
Packing List • Note that not to enter the power save mode (standby, hibernate, sleep) while installing the
software.
Model name Product name Quantity • If the cancel button is clicked during the installation, the installation is cancelled. In this case,
SW2DND-IQWK-E MELSOFT iQ Works Version 2 DVD-ROM 4 insert the DVD-ROM (Disc1), and restart the installation by following the on-screen instructions.
(English version package)
MITSUBISHI ELECTRIC FA Library DVD-ROM 2
• If a warning message from the security software is displayed, proceed the installation by
following the on-screen instructions.
(Standard license product) Installation Instructions (This document) 1 • The newer version software may be downloaded from MITSUBISHI ELECTRIC FA Global
End-user software license agreement 1 Website. After installing MELSOFT iQ Works Version 2, confirm the latest version on
Software registration notice 1 MITSUBISHI ELECTRIC FA Global Website. In order to download the newer version software,
membership registration of MITSUBISHI ELECTRIC FA Global Website is required.
License certificate 1
MITSUBISHI ELECTRIC FA Library 1
SW2DND-IQWK-EA MELSOFT iQ Works Version 2 DVD-ROM 4 Uninstallation
(English version package)
MITSUBISHI ELECTRIC FA Library DVD-ROM 2 Uninstall the application from the control panel of Windows.
(Volume license product) Installation Instructions (This document) 1
End-user software license agreement 1
Software registration notice 1
License certificate n*1
MITSUBISHI ELECTRIC FA Library 1

*1 Number of licenses.

 Acknowledgements
• We do not guarantee those commercially available Microsoft Windows Operating System
products that are introduced in this manual.
• This software's copyright is owned by Mitsubishi Electric Corporation.
• This product (including manual) can be used under the Software License Agreement only.
• We do not take any responsibilities for the consequences of operating this product (including
manual).

IQWK-VER2-O-INSTL-E
Installation of USB driver
In order to communicate with a programmable controller CPU via USB, a USB driver needs to be
installed.

 Windows 7
1. Connect a personal computer and a CPU module with a USB cable, and power ON a
programmable controller.
2. Select [Control Panel][System and Security][Administrative Tools][Computer
Management][Device Manager] from Windows Start. Right-click "Unknown device" and
click "Update Driver Software".
3. Select "Browse my computer for driver software" on the "Update Driver Software" screen,
and specify 'Easysocket\USBDrivers' in the folder where MELSOFT iQ Works Version 2 has
been installed on the next screen.
For the installation procedure when using an operating system other than Windows 7, refer to GX
Works3 Operating Manual [SH-081215ENG].

Ethernet is a registered trademark of Fuji Xerox Co., Ltd. in Japan.

Intel is either registered trademarks or trademarks of Intel Corporation in the United States
and/or other countries.
Microsoft, Windows, Windows Vista, and Windows XP are either registered trademarks or
trademarks of Microsoft Corporation in the United States and/or other countries.
The company names, system names and product names mentioned in this manual are either
registered trademarks or trademarks of their respective companies.
In some cases, trademark symbols such as '' or '' are not specified in this manual.

IQWK-VER2-O-INSTL-E