LIDETA MANUFACTURING

FASHION
LEVEL II COLLEGE
DESIGN
SESSION
DEPARTMENT OF GARMENT
PLAN
PRODUCTION AND FASHION
DESIGN

Session plan
Unit of competence Develop pattern using CAD system
Module title Developing pattern using CAD system
Units 1: Preparing workstation (8 hr.)
Session objectives At the end of this session, the learners shall be able to:
-OHS practices

- suitable CAD system and equipment.

- Digitizer and plotter are connected to CAD system and ready to

use

- pattern making and grading tools

Activities Nominal Contents Learning methods
duration

1/2 hr -Introduction

2 hr -Setting up suitable CAD system and Lecture

equipment.
Body 2 hr Lecture,Group work
-Applying OHS practices.
1 hr Lecture, demonstration
-Connecting digitizer and plotter
1 hr Lecture, demonstration
- Identifying pattern making and grading
tools
Evaluation 1/2 hr Written

Summary 1 hr Wrap-up the LO Lecture

Resource  Access is required to real or appropriately simulated situations, including work areas,
materials and equipment, and to information on workplace practices and OHS practices
Information sheet 1 of Fashion Design Level IIl

 By: Garment Department January 2024

 LIDETA MANUFACTURING

FASHION
LEVEL II COLLEGE
DESIGN
SESSION
DEPARTMENT OF GARMENT
PLAN
PRODUCTION AND FASHION
DESIGN

Session plan
Unit of competence Develop pattern using CAD system
Module title Developing pattern using CAD system
Units 2: Preparing the CAD operation (10 hr)
Session objectives At the end of this session, the learners shall be able to:
-Designer on computer system

-Job requirement

-Suitable software programme.

Activities Nominal Contents Learning methods
duration

3 hr -Organizing information obtained by Lecture

designer on computer system
Body 2 hr Lecture
-Determining job requirement
3 hr Lecture, demonstration
- Preparing suitable software
programme.
Evaluation 1 hr Written ,practice

Summary 1 hr Wrap-up the LO Lecture

Resource  Access is required to real or appropriately simulated situations, including work areas,
materials and equipment, and to information on workplace practices and OHS practices
Information sheet 1 of Fashion Design Level IIl

Session plan
Unit of competence Develop pattern using CAD system
Module title Develop pattern using CAD system
 By: Garment Department January 2024
 LIDETA MANUFACTURING

FASHION
LEVEL II COLLEGE
DESIGN
SESSION
DEPARTMENT OF GARMENT
PLAN
PRODUCTION AND FASHION
DESIGN

Units 3: Identifying key features of CAD software (10hr.)

Session objectives At the end of this session, the learners shall be able to:

-CAD software used for pattern making

-Features of CAD software

-CAD for pattern making software

-Compatibility of CAD software

-Software features and specifications

Activities Nominal Contents Learning methods
duration

2 hr -Describing types of CAD software used Lecture

for pattern making
2 hr Lecture
-Key features of CAD software
Body
2 hr Lecture, demonstration
- Analysing types of CAD for pattern
making software
2 hr Lecture, demonstration
- Identifying compatibility of CAD
software
Evaluation 1 hr Written , practice

Summary 1 hr Wrap-up the LO Lecture

Resource  Access is required to real or appropriately simulated situations, including work areas,
materials and equipment, and to information on workplace practices and OHS practices
Information sheet 1 of Fashion Design Level IIl

Session plan
Unit of competence Develop pattern using CAD system

 By: Garment Department January 2024

 LIDETA MANUFACTURING

FASHION
LEVEL II COLLEGE
DESIGN
SESSION
DEPARTMENT OF GARMENT
PLAN
PRODUCTION AND FASHION
DESIGN
Module title Developing pattern using CAD system
Units 4: Accessing CAD software and set-up for pattern
construction.(10 hr.)
Session objectives At the end of this session, the learners shall be able to:

- Computing technology

- Filing software

- diverse templates

- Organizational related symbol

- Save and backup

Activities Nominal Contents Learning methods
duration

1 hr - Workplace procedure for computing Lecture

technology
2 hr Lecture
- Accessing and filing software
Body 2 hr Lecture, demonstration
- Identifying the diverse templates
2 hr Lecture, demonstration
- Identifying and adjusting
organizational related symbol
1 hr Lecture, demonstration
- Identifying save and backup
Evaluation ½ hr Written

1 hr Practical

Summary 1/2 hr Wrap-up the LO Lecture

Resource  Access is required to real or appropriately simulated situations, including work areas,
materials and equipment, and to information on workplace practices and OHS practices
Information sheet 10 of Fashion Design Level IIl

Session plan

 By: Garment Department January 2024

 LIDETA MANUFACTURING

FASHION
LEVEL II COLLEGE
DESIGN
SESSION
DEPARTMENT OF GARMENT
PLAN
PRODUCTION AND FASHION
DESIGN
Unit of competence Develop pattern using CAD system
Module title Developing pattern using CAD system
Units 5: Producing basic pattern elements (15 hr.)
Session objectives At the end of this session, the learners shall be able to:
- produce basic pattern

-pattern pieces diverse templates

- Importing and exporting

- Pattern Piece

- pattern grading procedures

-Grading rule
Activities Nominal Contents Learning methods
duration

2 hr - Analyzing CAD functions to produce Lecture, demonstration

basic pattern
2 hr Lecture,demonstration
-Modifying and analyzing pattern pieces
diverse templates
2 hr Lecture, demonstration
-Exercising saving, importing and
Body exporting
2 hr Lecture, demonstration
-Industrializing Pattern Piece
2 hr Lecture, demonstration
-Understanding pattern grading
procedures
3 hr Lecture, demonstration
-Applying grading rule
Evaluation 1 hr Written,practice

Summary 1 hr Wrap-up the LO Lecture, demonstration

Resource  Access is required to real or appropriately simulated situations, including work areas,
materials and equipment, and to information on workplace practices and OHS practices
Information sheet 10 of Fashion Design Level IIl

 By: Garment Department January 2024

 LIDETA MANUFACTURING

FASHION
LEVEL II COLLEGE
DESIGN
SESSION
DEPARTMENT OF GARMENT
PLAN
PRODUCTION AND FASHION
DESIGN

Session plan
Unit of competence Develop pattern using CAD system
Module title Developing pattern using CAD system
Units 6: Digitizing and modifying patterns(15 hr.)

 By: Garment Department January 2024

 LIDETA MANUFACTURING

FASHION
LEVEL II COLLEGE
DESIGN
SESSION
DEPARTMENT OF GARMENT
PLAN
PRODUCTION AND FASHION
DESIGN
Session objectives At the end of this session, the learners shall be able to:

- Digitizing Manual pattern .

- pattern pieces for grading and marking.

- Plotting Pattern..

- personnel responsible for further action

Activities Nominal Contents Learning methods

duration

4 hr -Digitizing Manual pattern Lecture

4 hr Lecture,demonstration
-Preparing final pattern pieces for
Body grading and marking.
3 hr Lecture, demonstration
-Plotting Pattern. Preparing tech pack.
1:30 hr Lecture, demonstration
-Recording data and passing on to
personnel responsible for further action
Evaluation ½ hr Written

1 hr Practical

Summary 1 hr Wrap-up the LO Lecture

Resource  Access is required to real or appropriately simulated situations, including work areas,
materials and equipment, and to information on workplace practices and OHS practices
Information sheet 10 of Fashion Design Level IIl

Session plan
Unit of competence Develop pattern using CAD system
Module title Developing pattern using CAD system
Units 7: Grading and modifying patterns using CAD software.
 By: Garment Department January 2024
 LIDETA MANUFACTURING

FASHION
LEVEL II COLLEGE
DESIGN
SESSION
DEPARTMENT OF GARMENT
PLAN
PRODUCTION AND FASHION
DESIGN

( 17 hr.)
Session objectives At the end of this session, the learners shall be able to:

-Drafting pattern

-Digiting Pattern

-Digitizing the analogue pattern block

Activities Nominal Contents Learning methods

duration

5 hr -Drafting pattern with CAD software Demonstration

Body 5 hr Demonstration
-Digiting Pattern With CAD Software
4 hr Demonstration
-Digitizing the analogue pattern block
Evaluation 2 hr Practical

Summary 1 hr Wrap-up the LO demonstration

Resource  Access is required to real or appropriately simulated situations, including work areas,
materials and equipment, and to information on workplace practices and OHS practices
Information sheet 10 of Fashion Design Level IIl

Session plan
Unit of competence Develop pattern using CAD system
Module title Developing pattern using CAD system
Units 8: Checking and finalizing patterns(11 hr.)
Session objectives At the end of this session, the learners shall be able to:

- Make toile to test the fit and accuracy of pattern.

- Altering pattern to reflect test fitting outcomes.

 By: Garment Department January 2024

 LIDETA MANUFACTURING

FASHION
LEVEL II COLLEGE
DESIGN
SESSION
DEPARTMENT OF GARMENT
PLAN
PRODUCTION AND FASHION
DESIGN
- Documenting alterations to patterns
Activities Nominal Contents Learning methods
duration

3 hr - Making a toile to test the fit and Demonstration

accuracy of pattern.
3 hr Demonstration
-Altering pattern to reflect test fitting
Body outcomes.
2 hr Lecture, demonstration
-Documenting alterations to patterns

Evaluation 1/2 hr Written

1 hr Practical

Summary 1 hr Wrap-up the LO Lecture, demonstration

Resource  Access is required to real or appropriately simulated situations, including work areas,
materials and equipment, and to information on workplace practices and OHS practices
Information sheet 10 of Fashion Design Level IIl

 By: Garment Department January 2024

 LIDETA MANUFACTURING

FASHION
LEVEL II COLLEGE
DESIGN
SESSION
DEPARTMENT OF GARMENT
PLAN
PRODUCTION AND FASHION
DESIGN

 By: Garment Department January 2024