INDEX

1. Material Compliance statement

2. Project/MOW specifica ons reference/Drawing

3. Previous Approval/MSCEB Approval

4. Sample MTC

5. Manufacturer Profile
COMPLIANCE STATEMENT
PROJECT: BAHRAIN MARINA DEVELOPMENT PROJECT - CONSTRUCTION OF PHASE 1 MAIN WORKS.

SPECIFICATION COMPLIANCE SHEET

Dated: 20/05/2024

Material Description: Anchor Bolt with Hex Nut and Circular Washer with Grade 8.8 HDG MAC: 110310-C.4.13-002
Specification/DWG Ref. Compliance
Specification / Dwg Requirements with Reason and Advantages of
Proposal
Section No. Clause No. Specifications Proposal (If PC/NC)
(FC / PC / NC)

Vol-2
Shop and Site Bolt and Nuts in
ordinary Bolt Assemblies shall be Anchor Bolt with Hex Nut and Circular Washer with Grade
Division-5 8.8 HDG, M20 x 400mm long, M20 x 430mm long, M30 x
Section Grade 4.6 in accordance with
Clause 650mm Long with Circular Washer.
05 10 00 BS4190 or Grade 8.8 or 10.9 in FC
Structural
1.10.5 IFC Drawing – 110310 -C.5.3.1-BMR-STR-003, 110310-
accordance with BS 3692 but with C.5.3.4-Z04-GA-STR-005, 110310-C.5.3.4-Z04-GA-STR-
Metal dimension, Tolerance and Thread
Framing 005J.
length to BS 4190.

Legend: FC: Fully Compliant; PC: Partially Compliant; NC: Non‐Compliant

Certificate: We certify that all the requirements of the Specifications for the proposed product have been compared and all the deviations from the Specifications have been
identified by us in this form, if any.
Please ensure to specify and include the Anchor bolt M20 @ 150mm
embedment depth requirement to be anchored into the RC shear wall
of YACHT club building in reference from the attached Shop Drawing
110310-C.5.3.4-Z04-GA-STR-005J, SECTION A-A & DETAIL "10".

Biplab Saha
Subcontractor/Supplier : ……………………………….. ……………………………………………….

(Name) (Signature) (Company Stamp)

 SPECIFICATION &
REFERENCE IFC DRAWING

Contractor to please confirm also the above requirements for

Bolted Connections in bulleted points extracted from SECTION
05 10 00, CLAUSE 2.2, page 5 of 28 of the Civil Works Project
Specification for the proposed Anchor Bolts as presented from
the submitted MAR.
 BAHRAIN MARINA
Final Design and Tender

• Cold formed longitudinally welded hollow sections shall be in accordance

with BS EN 10219: Part 2.
• Purlins, side rails and accessories shall be manufactured from pre-hot-dipped
galvanized mild steel to BS EN 10143 with coating designation Z 275 and a
minimum yield stress of 280 N/mm2.
• All cold formed sections shall be formed by rolling, and not pressing.

• Dimensions and tolerances for cold formed steel materials shall comply with
the following standards:
o Cold rolled sections BS EN 10162
o Cold formed hollow sections BS EN 10219: Part 2

1.10.3 Stainless Steel

Stainless steel for structural purposes shall be grade (SS316L) S11 BS970 unless
specified otherwise.

1.10.4 Consumables

Consumables for use in metal arc welding shall comply with BS EN ISO 14341, BS
EN ISO 2560, BS EN 756, BS EN 757 and BS EN 760 as appropriate.

1.10.5 Structural Fasteners

Structural fasteners shall be in accordance with the following standards:

• Shop and site bolts and nuts in ordinary bolt assemblies shall be grade 4.6
in accordance with BS 4190 or grade 8.8 or 10.9 in accordance with BS 3692
but with dimensions, tolerance and threaded length to BS 4190.
• High strength friction grip (HSFG) bolt assemblies shall be in accordance
with BS 4395: Part 2, ASTM A 490 M Type 01 or DIN 6914 grade 10.9
• Stainless steel bolts, screws, studs and nuts shall be grade A4-80 to BS EN
ISO 3506 unless specified otherwise.
• Holding down bolts in foundations shall be in accordance with BS 7419.
• Cup and countersunk bolts shall be in accordance with BS 4933.
• Metal washers shall be made in accordance with BS 4320 Section 2 and
unless otherwise specified shall be black steel washers to Form E.
• All lock nuts shall be in accordance with BS EN ISO 2320 and BS EN ISO
7042 or BS EN ISO 7719 as appropriate.
• Where specific coatings are required to fasteners they shall be provided by
the fastener manufacturer and submitted to the Engineer for approval.

1.10.6 Shear Studs

Proprietary shear studs used in composite construction shall be in accordance with BS

5950: Part 3.1 and shall be the headed type with the following properties after being
formed:
• Minimum yield strength 350 N/mm2
• Minimum ultimate tensile strength 450 N/mm2
• At yield elongation of 15% on a 5.65 S o g a u g e le n g
Part 1.

STRUCTURAL METAL FRAMING Page 3 of 28

Section: 05 10 00 Division 05
 R23
KEY PLAN
550 WASHER PLATE
FLT 20x100x200 85 190 190 85 PLT 24x500x550 DOUBLE NUT
RHS 500x300x10.0 STIFFENER - 6 NOS

50
RHS 500x300x10.0
RHS 500x300x10.0 D RHS 500x300x8.0 - SEC. BEAM RHS 500x300x10.0 - MAIN BEAM
BASE PLATE
150 150

500
400
FLT 20x100x200 +17350
RHS 500x300x10.0 - MAIN BEAM RHS 500x300x10.0 - MAIN BEAM +17350
RHS 500x300x8.0 - SEC. BEAM RHS 500x300x8.0 - SEC. BEAM
STIFFENER
NON-SHRINK GROUT
ANCHOR BOLTS

50
10
10 6M 30x650 GR 8.8 PRESET ANCHOR BOLT
D 8

SECTION DETAILS - A TOP VIEW

SECTION DETAILS C - C SECTION DETAILS D - D

N
SCALE 1: 20 ARRIVAL BASE CONNECTION
SCALE 1: 20 SCALE 1: 20 M30 BOLT

Q
SCALE 1: 20

DETAIL 'A'
TACK WELD AT SHOP
(3 LOCATIONS) GENERAL NOTES:

RHS 500x300x8.0 RHS 500x300x8.0 RHS 500x300x8.0 RHS 500x300x8.0 RHS 500x300x8.0
RHS 500x300x10.0 RHS 500x300x10.0 RHS 500x300x10.0 RHS 500x300x10.0 RHS 500x300x10.0 RHS 500x300x10.0 RHS 500x300x10.0 RHS 500x300x10.0
+17350 ANCHOR BOLT DETAIL
SCALE 1: 10
STEEL STRUCTURE NOTE
TYP 10 FLT 20x100x200 TYP 10 FLT20x100x200 FLT20x100x200 FLT20x100x200
STIFFENER (6 NOS) STIFFENER (6 NOS) STIFFENER (6 NOS) STIFFENER (6 NOS)

RHS 500x300x10.0
RHS 500x300x10.0

RHS 500x300x10.0

RHS 500x300x10.0

RHS 500x300x10.0

RHS 500x300x10.0
RHS 500x300x10.0

1. STRUCTURAL STEEL PLATES AND HOT ROLLED SECTIONS

SHALL BE ACCORDING TO:
- ASTM A572 GRADE 50 HAVING A MINIMUM YIELD STRESS OF

3000
355 N/mm2,TYPICALLY USED.

2. ALL BOLTS SHALL BE OF GRADE 8.8.

FLT 20x100x200 FLT 20x100x200 FLT 20x100x200
8XSTIFFENER 8XSTIFFENER 8XSTIFFENER

FFL
+14000

600
+13750

ARRIVAL CANOPY SECTION A-A

SCALE 1: 50

COORDINATION
Discipline Company Sign Date
R5-16 02 R23 03 R4-01
3d - VIEW Project Manager NASS

Technical Manager NASS

STEEL MEMBERS SCHEDULE ARRIVAL CANOPY BASE CONNECTION
A 31580 SCALE 1: 20
MEP Coordinator
QA/QC Manager
NASS
NASS
TYPES REMARKS STEEL GRADE
7996 7792 7791 8000 Others

RHS 500x300x10 COLUMN S355

RHS 500x300x10.0
RHS 500x300x8.0 RHS 500x300x10 BEAM S355
RHS 500x300x8.0

RHS 500x300x8.0

RHS 500x300x8.0 RHS 500x300x8 BEAM S355

FLT20x100x200
STIFFENER
PLT 500x550x24 BASE PLATE S355 10
REV. DESCRIPTION DRAWN DATE
3970

PLT 24x500x550
PLT 100x200x20 STIFFENER S355 SHOP DRAWING
ANCHOR BOLTS
RHS 500x300x10.0 6M30x650 PACKAGE: CONSTRUCTION OF PHASE-1 MAIN WORKS
GR 8.8
CLIENT:
+14000
3008

CANOPY LOADING SCHEDULE

+13750
LIVE LOAD SUPER DEAD LOAD SERVICE LOAD
RHS 500x300x10.0 ( LL) ( SDL) ( SL)
RHS 500x300x8.0
RHS 500x300x8.0
RHS 500x300x8.0

Bahrain Marina Development Company

DETAIL 'A' 0.6kN/m² 0.5kN/m² - - P.O. Box 26990, Manama
DESIGN OF COLUMN BEAM Kingdom of Bahrain
WELD CONNECTION CONCRETE SLAB www.bahrainmarina.bh
3005

Tel: +973 17 130 130

RHS 500x300x10.0 ARRIVAL CANOPY BASE CONNECTION Fax: +973 17 130 140
SCALE 1: 20
RHS 500x300x8.0

PROJECT MANAGER & COST CONSULTANT:

RHS 500x300x8.0

RHS 500x300x10.0
RHS 500x300x8.0

RHS 500x300x8.0
RHS 500x300x8.0
25677

6010

R4-01
C C SUPERVISION CONSULTANT:

03
RHS 500x300x10.0
R23
02
3005

R5-16 MAIN CONTRACTOR:

RHS 500x300x10.0

NASS CONTRACTING
Building, Civil, Mechanical & Electrical Engineering Contractors & General Merchants
3005

P.O. BOX # 669 - Kingdom of Bahrain. Tel : 973 1770 8333 , Fax : 973 1770 1714

RHS 500x300x10.0 SUB CONTRACTOR:

R4-01
RHS 500x300x8.0

RHS 500x300x8.0
RHS 500x300x8.0

03
R23
3673

DRG.TITLE.
02 ARRIVAL CANOPY
RHS 500x300x8.0 STRUCTURAL G.A PLAN, SECTION,
R5-16 3d STRUCTURE OF ARRIVAL CANOPY AND DETAILS
SCALE 1: 150
7012 6803 6812 7017 DRAWN BY CHECKED BY APPROVED BY

27643 SSA J.KGC

DATE. SCALE SHEET SIZE
A1
PLAN ARRIVAL CANOPY DRG.NO. REVISION
A SCALE 1: 100 110310-C.5.3.1-BMR-STR-003 0
 KEY PLAN

N
Q
Y01 Y02 Y03 Y04 GENERAL NOTES:
Y05
STEEL STRUCTURE NOTE

1. STRUCTURAL STEEL PLATES AND HOT ROLLED SECTIONS

SHALL BE ACCORDING TO:
- ASTM A572 GRADE 50 HAVING A MINIMUM YIELD STRESS OF
Y06 PLOT BOUNDARY LINE
355 N/mm2,TYPICALLY USED.

2. ALL BOLTS SHALL BE OF GRADE 8.8.

YA
REFERENCES
YC-TB1
YB YC-TB1 Y07 * BNY-MA-AR-Z04-20-0101 S7-00
* BNY-MA-AR-Z04-20-0201 S7-00
YC-PC1 * BNY-MA-AR-Z04-22-AL01 S7-00
YC *
*
BNY-MA-AR-Z04-22-AL02 S7-00
BNY-MA-AR-Z04-21-AL03 S7-00
* BNY-MA-AR-Z04-21-AL04 S7-00
* GHE-MA-ST-Z04-20-201 TO 204 S7-00
YC-TB1
Y08 * GHE-MA-ST-Z04-24-205 TO 208 S7-00
YC-TB1 * GHE-MA-ST-Z04-24-304 S7-00
YC * GHE-MA-ST-Z04-24-305 S7-00
-P C3
LIF
TP
YC-PC2 IT
YC-PC1b
YC-TB1
Y09 COORDINATION
YD YC
-PC Sign Date
1 Discipline Company
R.C SLAB COLUMN STOPS ON 1ST
TH = 400MM FLOOR SOFFIT OF THE SLAB Project Manager NASS
CL. + 4450 (REFER SECTION I-I)
Y10 Technical Manager NASS
REINF. MESH R MEP Coordinator NASS
Y16@150MM T & B TH .C S Y11
YC-TB1 = 4 LAB QA/QC Manager NASS
00
MM YC
C L -PC Others
Y1 REI .+
445 1
6@ NF 0
1 5 . ME
0M S
M H
YC-TB3

T&

2
B

-TB
YC-TB1 YC YC DETAIL -2
-PC
1
YE
R.C SLAB
TH = 400MM
YF CL. + 4450 LIF
TP REV. DESCRIPTION DRAWN DATE
IT

2
-TB
REINF. MESH
Y16@150MM T & B SHOP DRAWING

YC
LIF
TP
IT
PACKAGE: CONSTRUCTION OF PHASE-1 MAIN WORKS

52
YC-PC1a YC-PC1a YC-PC1a CLIENT:

3x
2

20
M20 BOLTS GR. 8.8

-TB
YC

3x
YC
-P C4
TOP OF FIRST FLOOR

20
T16- HAIR PIN RE-BAR

UC
250/300

Bahrain Marina Development Company

P.O. Box 26990, Manama

2
Kingdom of Bahrain

-TB
J
GROUND FLOOR FRAMING LAYOUT

YC
150 100 SCALE 1 : 100 www.bahrainmarina.bh
BOT. OF FIRST FLOOR MIN.
J Tel: +973 17 130 130
Fax: +973 17 130 140
UC 203x203x52

2
-TB
R PROJECT MANAGER & COST CONSULTANT:
TH .C S

YC
= 3 LAB
00
MM
DETAIL -1 R CL
SECTION I-I .+

x86
Y1 EI 400
6@ NF 0
15 . ME
0M S

03
M20 BOLT M H
T&

3x2
(IN SITU) B
M20 BOLT

20
(IN SITU) *52
6

UC

4
-TB
5
*37

M20 BOLTS GR. 8.8

YC
6 SUPERVISION CONSULTANT:
UC 203x203x86
GROUND SSL
8
340

360

4
*59

-TB
2
E
DG

YC
COLUMN
BE
300

8 (UC 203x203x52)
400

SLA

270
GROUND SLAB
270
150
*515
E

MAIN CONTRACTOR:
DG
BE

SECTION J-J
SLA

COLUMN
(UC 203x203x86)
NASS CONTRACTING
Building, Civil, Mechanical & Electrical Engineering Contractors & General Merchants
DETAIL -1 DETAIL -2 P.O. BOX # 669 - Kingdom of Bahrain. Tel : 973 1770 8333 , Fax : 973 1770 1714

NOTE:
ALL DIMENSION WILL BE FLANGE 8 SUB CONTRACTOR:
360
VERIFIED IN WHILE PREPARATION YC
-TB
STEEL COLUMN 4
OF FABRICATION OF DRAWINGS. (AS PER PLAN)
(MODELED IN TEKLA)
60

16mm THK
BASE PLATE
270

150

DRG.TITLE.
YACHT CLUB
STEEL COLUMN LAYOUT -
60

40 280 40 M20 BOLTS GR. 8.8

CLADDING SUPPORT (GROUND LEVEL)
WEB 6
(IN SITU)

DRAWN BY CHECKED BY APPROVED BY

BASE PLATE DETAIL
SCALE 1 : 10 SSA J.KGC
DATE. SCALE SHEET SIZE
A1
DRG.NO. REVISION
110310-C.5.3.4-Z04-GA-STR-005 0
 KEY PLAN

ROOFING
(AS PER ARCHITECTURAL)

N
1200 1200

Q
GENERAL NOTES:

STEEL STRUCTURE NOTE

1. STRUCTURAL STEEL PLATES AND HOT ROLLED SECTIONS

SHALL BE ACCORDING TO:
100 - ASTM A572 GRADE 50 HAVING A MINIMUM YIELD STRESS OF

UC203*203*46
355 N/mm2,TYPICALLY USED.
M20 BOLTS GR. 8.8

73 116 25
2. ALL BOLTS SHALL BE OF GRADE 8.8.

YA REFERENCES

Concrete Slab * BNY-MA-AR-Z04-20-0101 S7-00

* BNY-MA-AR-Z04-20-0201 S7-00
* BNY-MA-AR-Z04-22-AL01 S7-00
Purlins Cleat 12mm Dia -SAG ROD

250/300
* BNY-MA-AR-Z04-22-AL02 S7-00
CO
NCRE MET-2-302Z25
* BNY-MA-AR-Z04-21-AL03 S7-00
TE * BNY-MA-AR-Z04-21-AL04 S7-00
SLA UB457*191*67 * GHE-MA-ST-Z04-20-201 TO 204 S7-00
B
* GHE-MA-ST-Z04-24-205 TO 208 S7-00
UB457*191*67 * GHE-MA-ST-Z04-24-304 S7-00
* GHE-MA-ST-Z04-24-305 S7-00
150 100
MIN. DETAIL '11' - PURLINS TO RAFTER

UB203*203*46
UC203*203*46
SCALE 1 : 10
COORDINATION
YA YB Discipline Company Sign Date

Project Manager NASS

Technical Manager NASS

MEP Coordinator NASS
QA/QC Manager NASS

FRONT VIEW Others

SCALE 1 : 10

REV. DESCRIPTION DRAWN DATE

SHOP DRAWING
PACKAGE: CONSTRUCTION OF PHASE-1 MAIN WORKS

DETAIL '9' CLIENT:

SCALE 1 : 10

Bahrain Marina Development Company

P.O. Box 26990, Manama
Kingdom of Bahrain
www.bahrainmarina.bh

Please ensure to specify and include the Anchor bolt M20 @ 150mm Tel: +973 17 130 130
Fax: +973 17 130 140

embedment depth requirement to be anchored into the RC shear wall of PROJECT MANAGER & COST CONSULTANT:

YACHT club building in the SPECIFICATION COMPLIANCE SHEET in

16MM END PLATE reference from the attached Shop Drawing
* REFER TO PLAN
HILTI HIT-RE 500 V4 + HAS-U 5.8 HDG
6-M20 @150mm EMBEDMENT
110310-C.5.3.4-Z04-GA-STR-005J, SECTION A-A & DETAIL "10". SUPERVISION CONSULTANT:
RC WALL RC WALL 16MM FIN PLATE
A 150 60 80 RAFTER: UB457*191*67/98

HILTI HIT-RE 500 V4 + HAS-U 5.8 HDG

100 100 100 75

6-M20 @150mm EMBEDMENT

150

MAIN CONTRACTOR:
510
150

NASS CONTRACTING
Building, Civil, Mechanical & Electrical Engineering Contractors & General Merchants
P.O. BOX # 669 - Kingdom of Bahrain. Tel : 973 1770 8333 , Fax : 973 1770 1714

SUB CONTRACTOR:
RAFTER: UB457*191*67/98 Bolts 8M20
120 Gr 8.8
A 16MM END PLATE
235
DRG.TITLE.
YACHT CLUB
DETAIL '10' SECTIONS AND DETAILS
SCALE 1 : 10 SECTION A-A SHEET 3OF6
SCALE 1 : 10

DRAWN BY CHECKED BY APPROVED BY

SSA J.KGC
DATE. SCALE SHEET SIZE
A1
DRG.NO. REVISION
110310-C.5.3.4-Z04-GA-STR-005J 0
 PREVIOUS APPROVAL

Please submit the Material Compliance Report Certificate from the Ministry of Works for all of the proposed
Anchor Bolts as proposed from the submitted MAR documentation.
 MAC Ref. No: 110301-O.5-328 - 0
REQUEST FOR Category STEEL STRUCTURE
MATERIAL Date : 25-May-23
APPROVAL Prev. Ref. No.:
Date
Project : The Avenues Phase 2B - West Expansion
To : MSCEB
Attn : Arvind Verma
From : Nass Contracting Co. WLL

Works : Hex Bolt, Hex Nut & Flat Washer - BASELINE

We request approval of the following material to be used in the above works :
1 Material Proposed : Hex Bolt, Hex Nut & Flat Washer (HDG)

2 Complies with Spec : ✔ Yes No Alt.Material Form Attached

3 Description and Location of use : Shop Front - Structural Steel

4 Contract Specification Reference : All Fasteners are hot dip galvanized as per ASTM A153 as per approved
drawing

5 Manufacturer/Country of Origin : Base Line Bolt & Industries/ UAE

6 Product Code :
7 Local Supplier / Agent : Base Line Bolt & Industries/ UAE

8 Estimated delivery period : 02 Weeks

9 Estimated date required at site : As soon as possible

10 Enclosures – Sample / Cat /Test Results etc. : MTC & Approved GA Drawings

11 Warranty: As per Specifications :

Note: Model No. / Product Codes need to be highlighted on the attached catalogues.
For the Contractor :

Name: Peter Taylor Designation: Project Director Signed: Date: 25-May-23

Comments by MSCEB
CIVIL COMMENTS:
1.Please ensure that proposed fasteners are complied with Contract drawings & Specification.
2. Material test certificates to be submitted during execution.

Status:

A) Approved B) Approved subject to comments ✔ C) Revise & Resubmit, Material can be used
D) Revise & Resubmit, Material can NOT be used E) Not Approved

Name: Arvind Verma Sign: Date: 18-Jun-23

Comments by Employer Rep:

No objection Rejected
Name: Sign: Date:
Note: The above approval does not relieve the Contractor from his responsibilities to ensure that the material to be used
shall be in accordance with specification and IFC drawings requirements.
 SAMPLE MTC

Please ensure to submit the approved copy of the Test

Certificate for the proposed Anchor Bolts which have been
certified by the 3rd Party Laboratory agency and not by the
same Manufacturer who has produced the SAMPLE COPY
of the testing that was carried out.
 SAMPLE MATERIAL TEST CERTIFICATE
(As per BS EN 10204 / 3.1)
Company Name: NASS INDUSTRIAL SERVICES Mtc no: SC087
Item
Description: ANCHOR BOLT (STRAIGHT- BOTH END THREADED TYPE) / HEX NUT Po ref no: SAMPLE
ISO 898-1 GR 8.8 Ed-13 / ISO 898-2 CL 8 Ed-12 Wo ref no: SAMPLE
Standard:
Date: 18-03-2024
CHEMICAL COMPOSITION%
S.No Item Size Heat no. C Mn P S Si Cr Mo Ni Qty
ANCHOR
1 BOLT M20 X 400 MM XXXXXXXX 0.41 0.60 0.017 0.005 0.21 - - - 1
HEX
1A NUT M20 XXXXXXXX 0.36 0.71 0.011 0.004 0.11 - - - 4
ANCHOR
2 BOLT M20 X 430 MM XXXXXXXX 0.41 0.60 0.017 0.005 0.21 - - - 1
HEX
2A NUT M20 XXXXXXXX 0.36 0.71 0.011 0.004 0.11 - - - 4
ANCHOR
3 BOLT M30 X 865 MM XXXXXXXX 0.46 0.62 0.015 0.004 0.23 - - - 1
HEX
3A NUT M30 XXXXXXXX 0.35 0.73 0.012 0.003 0.13 - - - 4

Please ensure to submit the

approved copy of the Test
MECHANICAL PROPERTIES Certificate for the proposed Anchor
S.No 1 1A 2 2A 3 3A
Bolts which have been certified by
UTS-Mpa 921 - 921 - 940 - the 3rd Party Laboratory agency
YS-Mpa 707 - 707 - 768 -
and not by the same Manufacturer
who has produced the SAMPLE
EL %
Reduction in
21 - 21 - 19 -
COPY of the testing that was
area% 54 - 54 - 56 - carried out.
225.4 225.4 516.10
Proof load - KN - KN - KN
Tempering
Temp oC 640 450 640 450 540 450
27-30 31-33 27-30 31-33 26-30 31-33
Hardness HRC HRC HRC HRC HRC HRC
BBI BBI BBI
Marking - 8 - 8 - 8
Surface Finish HOT DIP GALVANIZED, Avg. Coating Thk. 85+ microns
Coating Specification BS EN ISO 1461
Visual Inspection Cracks & Stamp edges not observed
Heat Treatment Quenched and Tempered
Threads Found Satisfactory, as per ASME B1.13M,6g/6H prior to coating
Dimensions Found Satisfactory, Anchor Bolt as per P.O and nut as per Hex Nut
FASTENERS WERE MANUFACTURED, SAMPLED, TESTED AND INSPECTED IN ACCORDANCE WITH THE ABOVE-MENTIONED SPECIFICATION
All values given are indicative and can change depends on selection of heat number on actual order.
For Baseline Bolts Industries LLC

QA/QC ENGINEER

Exhibit -41 rev -02 01/08/2014

Page 1 of 2
 DATE: 18-03-2024

OUR REF: LOC0087

LETTER OF COMPLIANCE-2.1 (EN 10204 -Ed 2004)

IT IS CERTIFIED THAT BASELINE BOLTS INDUSTRIES LLC HAS SUPPLIED THE MATERIAL AGAINST WO REF: 2024-SAMPLE TO
NASS INDUSTRIAL SERVICES AS SPECIFIED IN THE PURCHASE ORDER NO: 2024-SAMPLE

ITEM Qty

NO DESCRIPTION SIZE MATERIAL [SET]

1B FLAT WASHER M20 DIN 125 CS(A36) – HDG 2

2B FLAT WASHER M20 DIN 125 CS(A36) – HDG 2

3B FLAT WASHER M30 DIN 125 CS(A36) – HDG 2

THE ABOVE MATERIAL COMPLIES WITH THE SPECIFICATIONS MENTIONED IN THE ABOVE PURCHASE ORDER.

FOR BASELINE BOLTS

Please ensure to submit the approved

copy of the Test Certificate for the
Compliance letter for the proposed
Anchor Bolt washers to be certified by the
3rd Party Laboratory agency and not by
the same Manufacturer who has produce
the SAMPLE COPY of the testing that
was carried out.

Exhibit -41 rev -02 01/08/2014

Page 2 of 2
 MANUFACTURER PROFILE

Please list down all GCC project of similar kind where the
proposed Anchor Bolts were utilized.
 Q$+#!"!(+ÿ$"-ÿ"%&'(ÿ'*#ÿ$"08$%#0(!(ÿ."ÿ,.--*!ÿ!$+# a b c

01234563ÿ08492ÿ6 29532ÿ
"%&'(ÿ'*#+
  ÿ ÿ

!"#ÿ$"%&'(ÿ)'*#+ÿ$(!ÿ!,)!--!-ÿ."ÿ%'"%(!#!ÿ$"-ÿ/"-ÿ#&!.(ÿ0+$1!ÿ."ÿ+022'(#."1ÿ*.1&#ÿ2'*!+3ÿ)(.-1!ÿ($.*ÿ!40.2,!"#3ÿ+#(0%#0($*ÿ+#!!*ÿ%'*0,"+ÿ$"-ÿ&.1&5$6
+.1"ÿ+#(0%#0(!+ÿ$,'"1+#ÿ'#&!(ÿ$22*.%$#.'"+7ÿ&!ÿ)!"#ÿ2'(#.'"ÿ'8ÿ#&.+ÿ)'*#ÿ.+ÿ%$**!-ÿ#&!ÿ9*!1:ÿ$"-ÿ.+ÿ"'(,$**6ÿ0+!-ÿ#'ÿ%(!$#!ÿ(!+.+#$"%!ÿ+'ÿ$+ÿ#'ÿ,$;!ÿ+0(!
#&!ÿ)'*#ÿ-'!+ÿ"'#ÿ20**ÿ'0#ÿ'8ÿ#&!ÿ%'"%(!#!ÿ-!+2.#!ÿ8'(%!ÿ)!."1ÿ$22*.!-7
<"ÿ$--.#.'"3ÿ$+!*."!ÿ'*#+ÿ,$"08$%#0(!+ÿ$ÿ=$(.!#6ÿ'8ÿ%'"%(!#!ÿ$"%&'(ÿ)'*#ÿ%'"/10($#.'"+ÿ."%*0-."1ÿ+5!-1!-ÿ('-+3ÿ$"%&'(ÿ('-+ÿ$"-ÿ&!$-!-ÿ$"%&'(ÿ)'*#+7
!"#.'"!-ÿ)!*'5ÿ$(!ÿ#&!ÿ#62.%$*ÿ-.,!"+.'"+ÿ'8ÿ'0(ÿ%0+#',ÿ)!"#ÿ)'*#+>
ÿ?ÿÿ?ÿÿ?ÿ
.7!73ÿ.$,!#!(ÿ?ÿ!"1#&ÿ?ÿ!1ÿ-.+#$"%!ÿ?ÿ&(!$-

@ABCDAEFCGHBI
<ÿ,$"08$%#0(!+ÿ$ÿ=$(.!-ÿ($"1!ÿ'8ÿ%0+#',ÿ)!"#ÿ$"%&'(ÿ)'*#+ÿ#&!ÿ-.$,!#!(ÿ'8ÿ5&.%&ÿ($"1!+ÿ8(',ÿJKLMÿ#'ÿNMÿ#'ÿ)$+.%$**6ÿ80*/**ÿ$"6ÿÿ+2!%./%$#.'"7
'(!'=!(3ÿ'0(ÿ%0+#',ÿ)!"#ÿ$"%&'(ÿ)'*#+ÿ%',!ÿ!.#&!(ÿ$+ÿ2*$."ÿ/".+&!-ÿ'(ÿ&'#O-.2ÿ1$*=$".P!-7ÿ$+!*."!ÿ'*#+ÿ$*+'ÿ,$"08$%#0(!+ÿ+#$."*!++ÿ+#!!*ÿ$"%&'(
)'*#+7ÿQ0(#&!(,'(!3ÿ$**ÿ'0(ÿ'2!($#.'"+ÿ."%*0-."1ÿ#&!ÿ1$*=$".P."1ÿ2('%!++ÿ$(!ÿ2!(8'(,!-ÿ."O&'0+!7
0##."1 &(!$-."1 !"-."1 '#O.2ÿR$*=$".P."1

SFTEU
V 1 32ÿ56ÿW98XY
ÿQJZZNO[\3ÿQJZZNOZZ3ÿÿ[]^O_3ÿÿ[JNO[\3ÿ[JNOZZ
`]ÿ"%&'(ÿ'*#ÿ.,!"+.'"+

*.%;ÿ#$)*!ÿ#'ÿ+&'5ÿ-($5."1
012345ÿ7489ÿ ÿÿÿÿÿÿÿ
81ÿ13ÿ59ÿ 49ÿ81 ÿ59ÿ
 !  1"93 44# 35
($
& % & ' (&)*+ (&)*%
($
& (, & ' (&,&- (&,),
Contractor to please
($
& (& & ' (&.(% (&.(- confirm if the proposed
($
& (% ' ' /012ÿ45ÿ67127 (-*+- Anchor blots from the
submitted MAR are hot dip
*$ % & ' (++*& (++*)
% galvanized.
*$
% (, & ' (++*' (++**
*$
% (& ) ' (++)* (+.%-
*$
% (% ' . /012ÿ45ÿ67127 (+.*%
)$
' . ) ' ('(&& ('(&)
)$
' % ) ' (.*-- (..,,
)$
' (, ) ' (..,( (..,&
)$
' (& ' ' (..,) (..,'
)$
' (' ' . (%-(% (%-(-
)$
' (* ' . (*-%, (*-%(
)$
' (. ' . (%-&, (%-&(
)$
' (% ' . (*-%& (*-%) Contractor to please
)$ (% ' + /012ÿ45ÿ67127 (+-+- confirm & highlight the
'
proposed Anchor blot
)$
' &' ' . (..&- (..), materials base from the
)$ submitted MAR from the
' &' ' + /012ÿ45ÿ67127 (+-+,
Given available Materials
)$
' ), ' . /012ÿ45ÿ67127 (*-%- as listed by the
)$ Manufacturer.
' ), ' + /012ÿ45ÿ67127 (+-%(
)$
' ). ' + /012ÿ45ÿ67127 (-),(
+$
% (% ' . (*-%' (*-%*
( (& ' ' (%-), (-),*
( (. ' . (%-)( (-&-.
( (% ' . (*-%. (*-%+
( &' ' . (%-)) (-&-%
( ). ' . (*-+% (*-+-
( ). ' + /012ÿ45ÿ67127 (++&-
( ). ' (& /012ÿ45ÿ67127 (*-+.
($
(' )& . + /012ÿ45ÿ67127 (+,.)
($
(' ). * (& /012ÿ45ÿ67127 (-*-'
($
(' '& . + /012ÿ45ÿ67127 (+,.'
782#ÿ9ÿ:;<=>?@ABÿB@C>DÿEFGHÿIJKKLÿMN?<AÿOPQÿEORSÿMN?<AÿTUQÿ?;<ÿEEFVGWÿHOJLÿMN?<AÿOPÿ?;>XCNÿYCZ@B[
\ ÿ9ÿ:;<=>?@ABÿB@C>DÿEFGHÿIJKKLÿMN?<AÿKKÿ?;<ÿEEFVGWÿHOJLÿMN?<AÿKKÿ?;>XCNÿYCZ@B[ÿ]N?<AÿKKÿ?;>XCNÿYCZ@Bÿ^AA@ÿB_``ZA^A;@?Na
NAb_=NA^A;@ÿFJÿcCNÿdAZ<?Y=Z=@a[
012ÿ456ÿ7898 55
It appears that the data listed in this page is irrelevant to the
85 MAR documentation for the proposed Anchor bolts as no
225 substantial information is presented. Contractor to please
clarify
15
 5
2ÿ86859525
29
982ÿ858251
5665
258251 ÿÿ25

 !"#$ÿ&#'()
*ÿ192
 2ÿ192
08ÿ192
1 2 +ÿ192
08ÿ, 1ÿ192
08-ÿ0.ÿ192
0.ÿ192
2289ÿ192

9ÿ/2
08ÿ/2
1 ÿ21
8ÿ28
389989ÿ51 ÿ48
 ÿ48
2122ÿ48
21 ÿ982ÿ48
08ÿ982ÿ48
28 8ÿ982ÿ48

182ÿ65+
711 5 ÿ119
6952ÿ25 
48665 ÿ119
8ÿ982
, 1ÿ9
 0123456ÿ859919ÿ1 It appears that the data listed in this page is irrelevant to the
0 ÿ12 MAR documentation for the proposed Anchor bolts as no
substantial information is presented. Contractor to please
ÿ clarify.
9

 ÿ"#$%&
'('8)ÿ*+,+
-..ÿ/ÿ05451'
- 11ÿ/95ÿ2.195
345&6$5#ÿÿ46ÿ7#8&%##6

946ÿ: $&
8ÿ;5 <599ÿ1ÿ12 915
8ÿ;5 <599ÿ1ÿ=35 5
8ÿ;5 <599ÿ1ÿ>3ÿ/<915
8ÿ;5 <599ÿ1ÿ/<915
8ÿ;5 <599ÿ1ÿ29
8ÿ;5 <599ÿ1ÿ>3ÿ/. 915
8ÿ;5 <599ÿ1ÿ853951
8ÿ;5 <599ÿ1ÿ?115
3 $%ÿ@#A$
B C D E

Fÿ69123ÿGHI+'ÿ/ÿJ123ÿJ 9K1'
LLMÿOPQRSÿTRUVSÿWÿXYZ[\]\YZS