Series 15000
Single Seated Contour trim Globe Type Control Valve
Nominal Sizes ½” to 8”
Pressure Rating ASME 150#, 300#
Temperature -20°C to 450°C
Series 15000
Single Seated Globe Type Control Valve
Nominal Sizes ½” to 8”
Pressure Rating ANSI/ASME 150# & 300#
Temperature -20°C to 450°C
General purpose control valve for process
engineering and plants with industrial requirement.
Designed to provide a cost effective solution to a
variety of process Control application.
Features
Compact Design
Low Weight
Economic product due to compact design
Easy for maintenance
Equal Percentage and linear inherent
Flow characteristics
Interchangeability of trim components and
soft parts
Leakage Class up to Class VI
(as per ANSI/FCI-70-2)
Suitable for mounting Instruments Like
Positioner, Air set, Limit switches, Positioner
Transmitter
Nominal size:
½” to 8” Size
Pressure Ratings:
ANSI/ASME 150 & 300#
End Connection Styles:
Flanged RF, RTJ as per ANSI B16.5, DIN
2632,2633,2634,2635
Face to face dimensions
As per standard ANSI B 16.10
Body Material:
ASTM/ASME A216 Gr. WCB, A351 Gr. CF8M or
A217 Gr. WC6
Trim Type: Contoured- Metal and Soft Seats
Trim Material:
As per standard AISI SS316, with Stellited on
request
Seat –Plug seating
Metal/metal, soft seated or lapped-in metal
Bonnets:
Standard Type Temperature range:
-10° C to 220° C
Extended Type 220° C to 450° C
Bellow seated stem
20/30 -10° C to 300° C
Valve Bonnets:
Bonnet - Standard Type
Material: ASTM A 216- WCB & ASTM A 351- CF8M
For temperatures of -10° C to 220° C
Bonnet - Extended type
Material: ASTM A 216- WCB
For temperatures of 220° C to 400° C
Material: ASTM A 351- CF8M
For temperatures of 220° C to 450° C
Spindle seal by packing gland with open packing rings
Bonnet - Bellows Sealed Stem
Material: ASTM A 216- WCB & ASTM A 351- CF8M
For temperatures of -20° C to 300° C
Bellows Types:
Up to 15 bar operating pressure, single-wall bellows
Up to 32 bar operating pressure, double-walled
Bellows type
Bellows, plug spindle anti-rotation device designed as
one unit. The bellow is protected by anti-rotation device
against damage During assembly. To check bellows
tightness there is a test Chamber between bellows and
safety packing
Control valves Body Dimensions and Weight:-
Nominal Size DN Face-to-face dimensions Body + bonnet height Weight
A1 A2 A3
DIN ANSI DIN ANSI B 16.10 Standard Extended Bellows Kg (Appx)
mm mm Seal mm
150 RF 300 RF
15 ½” 130 ----- 190.5 8
70 235 264
20 ¾” 150 ----- 193.7 11
25 1” 160 184.2 196.9 11
56
32 1 ¼” 180 ----- ----- 11
221 250
40 1 ½” 200 222.3 235 23
78
50 2” 230 254.0 266.7 28
65 2 ½” 290 276.2 292.1 129 243 412 30
80 3” 310 298.5 317.5 171 285 416 35
100 4” 350 352.4 368.3 177 291 422 50
150 6” 480 450.9 473.1 332 332 746 140
200 8” 600 542.9 568.3 474 474 810 180
Selection of Materials:
-10 to 220° C Materials at temperatures of above +400° C to +450
Control-Valve Parts
Above +200 to 400° C
Body WCB CF8M WCB CF8M CF8M
AISI-316 AISI-316
AISI-316 AISI-316 stellited AISI-316 stellited
Valve trim
AISI-316 and PTFE Seating surface Seating surface
Seat and plug
Seal unit With glassfibers AISI-316 Completely stellited AISI-316 Completely
Monel or 17-4PH stellited
Stem and bellows seal unit AISI-316 AISI-316 AISI-316
Bonnets WCB CF8M WCB CF8M WCB CF8M
Stem guiding above 17-4 PH / SS316+Stellite 17-4 PH / SS316+Stellite SS316+Stellite
Stem seal PTFE Graphite Graphite
Gland SS316 SS316 SS316
Gasket Graphite Graphite Graphite
ASTM A193 Gr.B7 / ASTM A193 Gr.B7 /
ASTM A320 Gr.B8C
Studs ASTM A320 Gr.B8C ASTM A320 Gr.B8C
ASTM A194 Gr.2H / ASTM ASTM A194 Gr.2H / ASTM A194
Nuts ASTM A194 Gr.8C
A194 Gr.8C Gr.8C
*The company’s policy is one of continuous product improvement and the right is reserved to modify the specifications contained here in without notice”
Enoch Controls Private Limited
Plot No. A-40, Near Garware, MIDC, Ambad
NASHIK - 422010, MAHARASHTRA INDIA.
Ph : +91 253 2383548
Fax : +91 253 2383549
E-mail : salesenochvalve.com
Website : www.enochvalve.com
