Terrace Floor (MEP Costing)

Sr. No. Vendor Amount

1 Electromech ₹ 4,686,440.60
2 LantroVision ₹ 383,217.80
Total ₹ 5,069,658.40
 Electromech

Sr No Description Unit Quantity

1 Light Point Wiring

2 First Point Nos 15

3 Secondry Point Nos 143

Wiring for 16A/3P+N+E/415V/3Phase moulded plug & socket outlet

4 Nos 3
(IP67) with 4x2.5 sq.mm + 2x2.5 sq.mm (E) in 25mm dia conduit.

5 TV Point Nos 7

6 One In Two Out External Connectors - External Terrace Nos 68

5/15Amps Socket+16 Amps Switch + External PVC Enclosure - IP 55

7 Nos 7
Rated

8 Flooring Raceway

9 100X50mm Mtr 221.9

10 150X50mm Mtr 253.4

11 225X50mm Mtr 100.3

12 300X50mm Mtr 49.1

13 100X30mm Mtr 203.9

14 450X30mm Mtr 138.3

15 Junction Box

16 150X150mm Junction Box Nos 46

17 200X200mm Junction Box Nos 30

18 300X300mm Junction Box Nos 40

19 350X350mm Junction Box Nos 3

20 500X500mm Junction Box Nos 17

21 25mm GI conduit Mtr 127.1

22 Light Fixtures

23 E1 Nos 17

24 E3 Nos 3

25 E4 Nos 18

26 E5 Nos 50

27 E2 Nos 64

28 E6 Nos 6

Total Amount
 Rate Amount

₹ 4,380.00 ₹ 65,700.00

₹ 1,199.00 ₹ 171,457.00

₹ 29,485.00 ₹ 88,455.00

₹ 6,344.00 ₹ 44,408.00

₹ 770.00 ₹ 52,360.00

₹ 1,091.00 ₹ 7,637.00

₹ 730.00 ₹ 161,987.00

₹ 927.00 ₹ 234,901.80

₹ 1,473.00 ₹ 147,741.90

₹ 1,868.00 ₹ 91,718.80

₹ 665.00 ₹ 135,593.50

₹ 2,540.00 ₹ 351,282.00

₹ 602.00 ₹ 27,692.00

₹ 678.00 ₹ 20,340.00

₹ 812.00 ₹ 32,480.00

₹ 994.00 ₹ 2,982.00
 ₹ 1,171.00 ₹ 19,907.00

₹ 176.00 ₹ 22,369.60

₹ 13,296.00 ₹ 226,032.00

₹ 19,236.00 ₹ 57,708.00

₹ 10,596.00 ₹ 190,728.00

₹ 18,156.00 ₹ 907,800.00

₹ 24,096.00 ₹ 1,542,144.00

₹ 13,836.00 ₹ 83,016.00

Total Amount ₹ 4,686,440.60

 The cable and cordage shall be True UTP components that do not inc
components drain wire The copper conductors shall be surrounded by tape
and covered in a flame retardant LSZH jacket.
Category 6A/Class EA cable shall be constructed of 23 AWG copper
conductors
The equipment withpatch
cablecord diameter 6.3mm
shall meet ornominal.
exceed the following standards:
It
(a)should support6AOperating
All Category TX6A 10Gig temperature
patch cordsofshall -20 °Cbeto + 75 °C
factory terminated and
Cables should
supported by have TRACKING Number and QC number to check the
Genuity
the / details
system manufacturer of the test reports.
with 8modular plugs featuring PAN-PLUG™ one- be
(a) Minicom
The copper Category 6Ashall
conductors RJ45 positioninto
be twisted 8 conductor
pairs and modular
separated jacks
by ashall
cross-
piece,
used tanglefree
for the
divider; crosstalk
latch design
termination
cancellation
changes.
cabling
between inall
and
of
spiral
clear
copper
thethe 4 pairs.
in the
strain-relief
voice
form andof data
boots
a cross
to
backbone support easy moves,
cabling constant
that maintains
adds
and horizontal and
distance LantroVision
(b) The type
Campus of cable Building
Distributor, used forDistributors
the patch cord andshallFloorbeDistributors,
4 pair Category 6A for
and also
Structured Cabling
twisted System+D13
Sr.No. ITEM CODE unshielded
the
(a)
pair All four pairs
UTP of aofstranded shall be DECRIPTION
surrounded by OF
Vari ITEMS
MaTriX
construction. Each patch cord shall be QC, 100% tape and a flame Short Name
termination
retardant jacket. copper
The cables within equipment cabinets.
performance
(b) The modular jack shall design to meet ANSI/TIA-568-C.2 Category 6A 10
advanced
tested at andMaTriX
the factory tape in shall suppress
a channel testthe to theeffect of alienTIA/EIA-568-C.2
proposed crosstalk allowing
standard
Gb/s ETL
Category 6A
1 tested and approved
PUL6AHD04WH-EG transmission,
standard.
for Category
while minimizing cable 6A diameter
component compliance
. This will ensure that even Cat6A Cable
(c) Thetorsion
under modular jack termination shall be accomplished by use of a forward
(c) All
motion patch cord shall consist of round, 28 AWG copper, solid conductors,
during
tightly installation, the crosstalk should be constant over the whole cable.
twisted
termination
(b) The copper capconductors
and shall not shallrequire
be the use ofby
surrounded a punchdown
advanced tool (tool-less
MaTrix tape and
into individual pairs and jacketed with flame retardant PVC. The
termination). patch cord
covered
shall come by in a
2 (d) Theretardant
UTP28X2MGR flame
standard
modular PVC jack jacket.
lengths of one,
termination cap shall provide strain relief on the cable
two, three, and five meters and six standard 2M GREEN PATCH CORD
jacket,
(c)The ensure
Category 6A UTPbecable shall 1863
be Underwriter’s Laboratories (UL*) listed
(d)
cableAll
Exceeds patch
twists cord
ANSI/TIA-568.2-Dshall
are maintained UL torated
Category
within6A 1/8” and
and meets
ISO
(3.18mm) 11801 IEC
and60603-7.
Class EA a wiring
include
with LSZH
Structured flame
Cabling rating,
System
Channel
scheme
No Special performance
label. The
Grounding requirements with up to two field term plugs in
System
channel.
wiringParty Technical
Meets
scheme orSpecifications
label exceeds
shall beproposed & Project
available TIA
with Guidelines
Modular
both T568A Plug6 Feb 2019
Terminated
and6A T568B wiringshall
Third
(e) All patch Certific+D16ate--UL
cord shall meet Verified
ANSI/TIA-1096-A; Certificate for Cat
contacts UTP cable
3 CJ6X88TGGR Link requirements
schemes.
be provided as per with up to two field term plugs
requirement in linkplated with 50 micro- Green IO
inches
Compatible
(e) of
The modulargold.with 4-pair,
jack shall22–26
be able AWG to solid
be or stranded unshielded
re-terminated a minimum of 10
(d)
(f) Cat6A
All patch UTP cable must exceed itTIA/EIA-568-C.2 Category 6Apart
twisted
times and
requirements.pair becord
cable shall
It andwithhave
must be
labels
conductor on to provide
insulation diametersidentification
of 0.060 of in.
number,
maximum
available length,
in and overall
11 standard cable O.D.for
colours 0.200 in.fortoany
colour-coding 0.330 in
purposes.
tested
quality to Class
control E to ensure
number. performance application up to and
Meets
(f) The ANSI/TIA-1096-A
including module
10Gig jack
bps. shall (formerly
snap into FCC Part 68)
faceplate, modular patch panel, or angled
4 FP6X88MTG (g)
IEC All patch
60603-7, cord
IEC shall
60529 compatible with optional RJ45 plug lock-in device to RJ45
modular
(e) The
prevent
patch
Cat6A UTP cable(IP must20)meet requirement specified for current
RoHS
panel.Compliant
applications such as
unauthorized
Supports IEEE removal
802.3af / 802.3at
(g)
IEEE
The
The module
802.3,
patch
jack accepts
10/100/1000
cords will have BASE6 and
insertionT;(PoE/PoE+)
8 position
IEEE 802.5,
lifePower
of 2500
and 802.3bt
modular
4/16/100Mbps;
cycles
type
plugs
minimum.
3 andForum
without
ATM damage.
type
(h) The4 (PoE++)
modular
52/155/622/1200 applications.
jack contacts
Mbps, Supports
shall be
1 Gigabit, 10 plated
Gigabit over
with HDBaseT up to of gold for
50 micoinches
Networking.
5 Nominal
CPPA24FMWWH 100
CPPA24FMWWH cordage diameter
-cables
24 port shall
Angular not exceed
Patch panel 4.7 mm 24 Port Jack panel white
The
watts.
superior
(f) The
patchhorizontal
cord shall shall
becycles
UL be run
1863using and ameetsstarUnloaded
topology -format
White from
color the TR
Rated tofloor
performance
on each 2500 mating
and comply torated
ANSI/TIA-1096-A. IEC 60603-7
(Make--Panduit)
UL
(i) 1863
The (Use
module asjack
communications
shallAllbecable
UL 1863 circuit accessory)
approved.
6 SRB19BLY to every
SRB19BLY
Patch cordsindividual
- Cable
to be TO.
Support
lable withbarself routes
adhesive must lablefollow
during theInstallation,
routes and also directions
Velcro Support bar
UL
(j) 2043
The
described (Suitable
moduleon the jack for use
maximum
drawings. in air-handling
operating spaces)
temperature rating shall be 65oC.
ties
(Make to be used
(k) The --Panduit) for dressing during installation
module jack shall be rated for 2500 mating cycles with IEEE
802.af/802.3at and
proposed 802.3bt type 3 and type 4.
(l) The module utilizes patented MaTriX™ Technology to optimize
performance by reducing
conductor untwist to less than 3mm
Make-- Panduit
roVision
Unit Quantity Supply Rate Supply Amount Install Rate Install Amount

Rolls 12 ₹ 18,837.00 ₹ 226,044.00 ₹ 1,525.00 ₹ 18,300.00

Nos 52 ₹ 862.05 ₹ 44,826.60 ₹ 50.00 ₹ 2,600.00

Nos 72 ₹ 424.20 ₹ 30,542.40 ₹ 150.00 ₹ 10,800.00

Nos 52 ₹ 564.90 ₹ 29,374.80 ₹ 150.00 ₹ 7,800.00

Nos 3 ₹ 2,430.00 ₹ 7,290.00 ₹ 250.00 ₹ 750.00

Nos 3 ₹ 1,380.00 ₹ 4,140.00 ₹ 250.00 ₹ 750.00

Total ₹ 342,217.80 ₹ 41,000.00

Grand Total ₹ 383,217.80